Non-covalent interactions (NCIs) in π-conjugated functional materials: advances and perspectives

Nitrogen mono-doping of graphene and co-doping with group 14 as a sensor for diisobutyl phthalate: Insight from a computational study

Diisobutyl phthalate (DIBP) is a highly toxic plasticizer found in edible consumer products and industrial products. It affects the male reproductive system, bioaccumulates in water, and poses health risks. Given its widespread occurrence, designing novel sensor materials for sensing of DIBP is necessary for environmental and health safety. In this research, density functional theory (DFT) at the DFT/MN15/LanL2DZ level was employed to study the structural analysis, electronic properties, visual studies, and sensor mechanisms of modified graphene systems for the detection of diisobutyl pththalate (DIBP). An increase in energy gap values was observed for all studied systems on complexation with gas molecules, which depicted the stable properties of the system. The electronic properties revealed that upon adsorption, the DIBP-Sn-N@GP energy gap was the smallest at 2.778 eV, which indicates great conductivity. The adsorption energy showed that chemisorption occurred in the studied systems. DIBP-Si-N@GP showed the strongest adsorption energy of -18.171 eV, while DIBP-N@GP showed weak chemisorption of -0.914 eV. According to the UV-visible spectrum, DIBP-Ge-N@GP has the greatest peak at a wavelength of 1979.79 nm in the first excited state, corresponding to the H-1→L+2 transition. The sensor mechanism showed that among the tested surfaces, DIBP-Si-N@GP showed the best sensing properties and can be considered good gas sensor materials, attributed to its highest adsorption energy, stabilization energy, and charge transfer values with the lowest back donation energy value.

Tuning Optical Properties of Organic Thin Films through Intermolecular Interactions - Fundamentals, Advances and Strategies

In applications ranging from photon-energy conversion into electrical or chemical forms (such as photovoltaics or photocatalysis) to numerous sensor technologies based on organic solids, the role of supramolecular structures and chromophore interactions is crucial. This review comprehensively examines the critical intermolecular interactions between organic dyes and their impact on optical properties. We explore the range of changes in absorption or emission properties observed in molecular aggregates compared to single molecules. Each effect is dissected to reveal its physicochemical foundations, relevance to different application domains, and documented examples from the literature that illustrate the potential modulation of absorption or emission properties by molecular and supramolecular structural adjustments. This work aims to serve as a concise guide for exploiting supramolecular phenomena in the innovation of novel optical and optoelectronic organic materials, with emphasis on strategic application and exploitation.

Different Stacking Types in a Single Hybrid Cocrystal System: π···π- and π-Hole-Based Organic-Inorganic Planar Assemblies

The planar bis-chelated complex [Pd(N∩O)2] (1; N∩O = 4-MeC5H3NNC(O)NMe2) exhibits two distinct stacking modes with electron-deficient aromatics: π···π stacking with hexafluorobenzene (C6F6) versus charge-transfer π-hole interactions with 1,2,4,5-tetracyanobenzene (TCB). Cocrystallization of the complex with C6F6 or TCB yields cocrystals 1·3(C6F6) and 1·2TCB, respectively, which display different colors and stacking patterns despite similar structural motifs. Comprehensive analysis using X-ray diffraction, combined with quantum theory of atoms-in-molecules (QTAIM), an independent gradient model based on Hirshfeld partition (IGMH), extended transition state natural orbital for chemical valence theory with charge displacement function (ETS-NOCV/CDF), many-body interaction analysis, and symmetry-adapted perturbation theory (SAPT), reveals fundamentally different interaction mechanisms. In 1·3(C6F6), the stacking is primarily governed by intermolecular polarization without significant charge transfer, with dispersion forces contributing approximately 70% of the attractive energy. In contrast, 1·2TCB exhibits pronounced charge transfer (35 me) and significant inductive components alongside dispersion forces, characteristic of π-hole interactions. This dichotomy in stacking behavior provides new insights into the nature of organic-inorganic planar assemblies and demonstrates that seemingly similar structural patterns can arise from distinctly different combinations of noncovalent forces, which is essential for rational crystal engineering of hybrid materials.

The nature of halogen bonding: insights from interacting quantum atoms and source function studies

A detailed study of the X...N (X = I, Br) halogen bonds in complexes formed by an extended set of substituted pyridines with D-X molecules (D = X, CN) is reported here. The nature of these interactions has been investigated at different (MP2 and DFT) levels of theory through Bader's quantum theory of atoms in molecules (QTAIM) and Pendás' interacting quantum atoms (IQA) scheme, focusing on the role of the local environment (i.e. the substituent on the pyridine ring and the halogenated residue) on the halogen bond features. We found that the exchange-correlation energy represents a substantial contribution to the IQA total energy, in some cases comparable to (I2 complexes) or even dominating (ICN complexes) the electrostatic term. Meaningful information is provided by the source function, indicating that the major contribution to the electron density at the bond critical point of the X...N interaction is derived from the halogen atom, while a much lower contribution comes from the nitrogen atom, which acts as either source or sink for electron density. A relevant contribution from distal atoms, including the various electron-donor and electron-withdrawing substituents in different positions of the pyridine ring, is also determined, highlighting the non-local character of the electron density. The existence of possible relationships between binding energies, interaction energies according to IQA, and QTAIM descriptors such as delocalization indices and source function, has been inspected. In general, good correlations are only found when the local environment, external to the directly involved halogen and nitrogen atoms, plays a minor role in the interaction.

The matere bond

This perpective delves into the emerging field of matere bonds, a novel type of noncovalent interaction involving group 7 elements such as manganese, technetium, and rhenium. Matere bonds, a new member of the σ-hole family where metal atoms act as electron acceptors, have been shown experimentally and theoretically to play significant roles in the self-assembly and stabilization of supramolecular structures both in solid-state and solution-phase environments. This perspective article explores the physical nature of these interactions, emphasizing their directionality and structural influence in various supramolecular architectures. Recent studies have expanded the understanding of matere bonds beyond classical metal-ligand coordination, highlighting their potential in crystal engineering and catalysis. This perspective article also examines the occurrence of matere bonds in biological systems, particularly within manganese-containing proteins, where they contribute to the structural integrity and catalytic activity. Theoretical and computational analyses, including molecular electrostatic potential surfaces and density functional theory, further elucidate the properties and applications of matere bonds, offering new insights for the design of advanced materials and biomimetic systems. This comprehensive overview underscores the versatility of matere bonds, paving the way for future innovations in supramolecular chemistry involving metals.

Suppressing Exciton-Vibration Coupling via Intramolecular Noncovalent Interactions for Low-Energy-Loss Organic Solar Cells

Minimizing energy loss is crucial for breaking through the efficiency bottleneck of organic solar cells (OSCs). The main mechanism of energy loss can be attributed to non-radiative recombination energy loss (ΔEnr) that occurs due to exciton-vibration coupling. To tackle this challenge, tuning intramolecular noncovalent interactions is strategically utilized to tailor novel fused ring electron acceptors (FREAs). Upon comprehensive analysis of both theoretical and experimental results, this approach can effectively enhance molecular rigidity, suppress structural relaxation, reduce exciton reorganization energy, and weakens exciton-vibration coupling strength. Consequently, the binary OSC device based on Y-SeSe, which features dual strong intramolecular Se ⋅ ⋅ ⋅ O noncovalent interactions, achieves an outstanding power conversion efficiency (PCE) of 19.49 %, accompanied by an extremely small ΔEnr of 0.184 eV, much lower than those of Y-SS and Y-SSe based devices with weaker intramolecular noncovalent interactions. These achievements not only set an efficiency record for selenium-containing OSCs, but also mark the lowest reported ΔEnr value among high-performance binary devices. Furthermore, the ternary blend device showcases a remarkable PCE of 20.51 %, one of the highest PCEs for single-junction OSCs. This work demonstrates the effectiveness of intramolecular noncovalent interactions in suppressing exciton-vibration coupling, thereby achieving low-energy-loss and high-efficiency OSCs.

Regioisomerism in NIR-II-emissive semiconducting biradicals for high-performance bioimaging and phototheranostics of tumors

Photothermal agents (PTAs) have received significant attention in medical therapeutic and diagnostic applications. Despite their tremendous development, developing PTAs is challenging when applied to a living body with deep tissue, as it usually leads to attenuated therapeutic efficiency and potential biosafety hazards. Here, we report a molecular isomerization strategy based on NIR-II semiconducting biradicals that boosts the performance of NIR-II phototheranostics. With a stereoisomeric design by precisely manipulating the substitution position of the alkyl side chain, the optimal isomer, α-TBTS, and its nanoparticles (NPs) provide enhanced NIR-II absorption and 63% photothermal conversion capabilities, resulting in efficient photoablation of tumor cells. Most importantly, the relationship between the molecular isomerism of these NIR-II theranostics enables enhanced NIR-II performance, which has been proven by theoretical and ultrafast spectroscopy studies. With all these advantages, the α-TBTS nanoplatform has simultaneously achieved high-resolution whole-body NIR-II angiography and trimodal tumor-targeted imaging in vivo. Moreover, α-TBTS NPs efficiently inhibited tumor growth without recurrence upon NIR-II light irradiation, providing good biosafety. This work demonstrates the feasibility of molecular isomerization in multimodal NIR-II biradical PTAs and thus provides a suitable theranostic agent for high-performance tumor phototheranostics.

In silico evaluation of 4-thiazolidinone-based inhibitors against the receptor for advanced glycation end products (RAGE)

Non-enzymatic glycation of biomolecules by reducing sugars led to several products, including the advanced glycation end products (AGEs), the accumulation of which has been linked to various life-threatening diseases. The binding of AGEs to their respective protein receptors for advanced glycation end products (RAGE) can initiate a cascade of reactions, which may alter physiological conditions. The present work investigates the potential of 4-thiazolidinones as RAGE inhibitors. We performed an extensive computational study to identify the structural requirements needed to act as RAGE inhibitors. To achieve this goal, 4-thiazolidinone-based compounds available in PubChem, ZINC15, ChEMBL, and ChEBI databases were screened against RAGE (PDB: 4LP5), leading to the identification of top five drug-like candidates with a high binding affinity to RAGE V-domain catalytic region. Drug likeness, absorption, distribution, metabolism, excretion, and toxicity (ADMET) of the top-scoring compounds have been studied and discussed. Global molecular descriptors, chemical reactivity, hardness, softness, etc., have been estimated. Finally, molecular dynamics (MD) simulations at 100 ns were carried out to check the stability and other properties. Overall, we believe that the identified compounds can potentially attenuate RAGE-AGE interactions.Communicated by Ramaswamy H. Sarma.

Constructing High-Performance Composite Epoxy Resins: Interfacial π-π Stacking Interactions-Driven Physical Rolling Behavior of Silica Microspheres

The intrinsic compromise between strength and toughness in composite epoxy resins significantly constrains their practical applications. In this study, a novel strategy is introduced, leveraging interfacial π-π stacking interactions to induce the "rolling behavior" of microsphere fillers, thereby facilitating efficient energy dissipation. This approach is corroborated through theoretical simulations and experimental validation. The resulting composite epoxy resin demonstrates an impressive 49.8% enhancement in strength and a remarkable 358.9% improvement in toughness compared to conventional epoxy resins, accompanied by substantially reduced hysteresis. Moreover, this system achieves reversible closed-loop recyclability and rapid repair capabilities. The preliminary demonstration of "force-temperature equivalence" further establishes a novel pathway for the design of high-performance composite epoxy materials.

Appraisal of the Fragments-In-Fragments Method for the Energetics of Individual Hydrogen Bonds in Molecular Crystals

We report a direct application of the molecular tailoring approach-based (MTA-based) method to calculate the individual hydrogen bond (HB) energy in molecular crystal. For this purpose, molecular crystals of nitromalonamide (NMA) and salicylic acid (SA) were taken as test cases. Notably, doing a correlated computation using a large molecular crystal structure is difficult. Among 15 density functional theory functionals, the B3LYP provides accurate estimates of HB energies closed to the CCSD(T) ones using the 6-311 + G(d,p) basis set for all atoms. The direct application of the MTA-based method to these crystal structures is although straightforward. For instance, the calculated energy suggests that three intramolecular HBs in NMA crystal are of stronger strength (7.3-17.0 kcal/mol) than the intermolecular ones (2.7-4.0 kcal/mol). On the other hand, intermolecular HB in SA crystal is moderately stronger (9.9 kcal/mol) than intramolecular one (8.1 kcal/mol). However, these energy calculations by the MTA-based method are very expensive. For instance, the time needed to evaluate the energy of all seven HBs in NMA crystal (having molecules within maximum of 15 unit cells) is 122,681 min (~2.7 months). In view of this, we assessed our recently proposed linear-scaling Fragments-in-Fragments (Frags-in-Frags) method for estimating the single-point energies of parent molecular crystal and fragments of the MTA-based method. It has been found that the estimated HB energies by the Frags-in-Frags method are in excellent linear agreement with their MTA-based counterparts (R2 = 0.9993). Furthermore, root mean square deviation is 0.12 kcal/mol. Mean and maximum absolute errors are 0.10 and 0.5 kcal/mol, respectively, and the standard deviation is 0.14 kcal/mol. Importantly, the Frags-in-Frags method is computationally efficient; it needs only 18,289 min (~12.7 days) for the estimation of energy of all HBs in NMA crystal and 3499 min (~2.4 days) for all HBs in SA crystal.

Nucleophilicity of the Nitrile N Atom Whose Lone Pair Is Blocked by Metal Coordination. The π-Hole Interaction between an Arene Carbon and the Metal-Bound Nitrile Nitrogen

Cocrystallization of CuI with NCNMe2 in the presence of substituted perfluoroarenes─iodoperfluorobenzene (IFB), 4,4'-diiodoperfluorobiphenyl (4,4'-FIBP), and 4-bromoperfluorobenzonitrile (4-BrFBN)─led to the formation of three types of adducts 1·2(IFB), 1·4,4'FIBP, and 1·4-BrFBN (1 is Cu4I4(NCNMe2)4), all studied by X-ray crystallography. In these cocrystals, the coordinated nitrile N atom (whose electron pair is engaged in metal coordination) still acts as an electron donor, forming π-hole interactions, specifically, π-holearene···Nnitrile, with the perfluoroarenes. These interactions were examined in the context of their occurrence alongside other interactions involving C atoms of the electron-deficient aromatic rings and nucleophilic atoms of the copper cluster. Comprehensive theoretical calculations, including MEP, QTAIM/NCI plot analysis, EDA, ELF projections, and ETS-NOCV calculations, revealed that the nitrile ligand N atom maintains significant negative potential and that π-hole interactions are energetically more favorable than σ-hole interactions in the studied systems. This nucleophilicity is based on a noticeable contribution of the heterocumulene form, Cu-N-═C═N+Me2, in the resonance hybrid of Cu-bound NCNMe2: a phenomenon influenced by both the coordination and the conjugation between the NR2 and CN groups The discovery of π-holearene···Nnitrile contacts adds a new dimension to our understanding of coordinated push-pull nitriles, in particular dialkylcyanamides, revealing that the coordinated nitrile N atom can still function as a nucleophile in noncovalent binding.

Unraveling the Strength and Nature of Se∙∙∙O Chalcogen Bonds: A Comparative Study of SeF2 and SeF4 Interactions with Oxygen-Bearing Lewis Bases

Chalcogen bonds (ChBs) involving selenium have attracted substantial scholarly interest in past years owing to their fundamental roles in various chemical and biological fields. However, the effect of the valency state of the electron-deficient selenium atom on the characteristics of such ChBs remains unexplored. Herein, we comparatively studied the σ-hole-type Se∙∙∙O ChBs between SeF2/SeF4 and a series of oxygen-bearing Lewis bases, including water, methanol, dimethyl ether, ethylene oxide, formaldehyde, acetaldehyde, acetone, and formic acid, using ab initio computations. The interaction energies of these chalcogen-bonded heterodimers vary from -5.25 to -11.16 kcal/mol. SeF2 participates in a shorter and stronger ChB than SeF4 for all the examined heterodimers. Such Se∙∙∙O ChBs are closed-shell interactions, exhibiting some covalent character for all the examined heterodimers, except for SeF4∙∙∙water. Most of these chalcogen-bonded heterodimers are predominantly stabilized through orbital interactions between the lone pair of the O atom in Lewis bases and the σ*(Se-F) antibonding orbitals of Lewis acids. The back-transfer of charge from the lone pair of selenium into the σ* or π* antibonding orbitals of Lewis bases is also observed for all systems. Energy decomposition analysis reveals that the electrostatic component significantly stabilizes the targeted heterodimers, while the induction and dispersion contributions cannot be ignored.

Noncoordinating Anions as Key Modulators of Supramolecular Structures, Optical and Electrical Properties in Nickel(II) Complexes

This study explores the synthesis, structural characterization, and examination of two nickel(II) complexes, [Ni(N 3 L 1 )2](NO3)2 (complex 1) and [Ni(N 3 L 1 )2](ClO4)2 (complex 2), using the newly synthesized organic heterocyclic chelating ligand N 3 L 1 [4-imidazole-2,6-di(pyrazinyl)pyridine]. Through single-crystal X-ray diffraction, we have detailed the crystal structures of these complexes, highlighting their distorted octahedral geometries and diverse supramolecular interactions including π···π stacking, anion···π, and hydrogen bonding. These interactions crucially influence the formation of distinct one- and two-dimensional supramolecular architectures. Density functional theory (DFT) calculations were utilized to probe these noncovalent interactions, revealing insights into their stereoelectronic influence and stability in the solid state. Additionally, the electronic properties of the complexes were explored through their electrical characterizations in Schottky diodes, which suggest the potential of these complexes in Schottky diode based electronic devices applications. Notably, complex 2, incorporating perchlorate anions, exhibited better electrical properties than complex 1. This work aims to elucidate the role of noncoordinating counteranions in the structural integrity and photophysical behavior of these complexes, while also providing a structure-function correlation through detailed theoretical analysis.

Catalytic engineering of transition metal (TM: Ni, Pd, Pt)-coordinated Ge-doped graphitic carbon nitride (Ge@g-c3n4) nanostructures for petroleum hydrocarbon separation: An outlook from theoretical calculations

The extraction, processing, and utilization of petroleum often results in the release of diverse hydrocarbon pollutants into the environment, leading to severe ecological and health implications. Herein, the adsorption and separation of ethane (EAN), ethene (EEN), ethyne (EYN), and benzene (BZN) fractions of paraffin, olefin, acetylene, and aromatic petroleum hydrocarbons were investigated via the catalytically engineered nickel group transition metals; nickel (Ni), palladium (Pd), and platinum (Pt). These transition metals were coordinated on Germanium-doped graphitic carbon nitride (Ge@g-C3N4) nanostructures, and the behavior of the systems was studied through Kohn-Sham density functional theory (KS-DFT) with the B3LYP-D3(BJ)/Def2-SVP computational method. The adsorption of petroleum hydrocarbons decreased in the order Ge_Ni@C3N4 > Ge_Pd@C3N4 > Ge_Pt@C3N4>Ge_Pt@C3N4. These results showed that the coordination of Ni, Pd, and Pt within Ge@C3N4 improved the separation of petroleum hydrocarbons.

Effect of non-covalent interactions on the stability and structural properties of 2,4-dioxo-4-phenylbutanoic complex: a computational analysis

CONTEXT

The 2,4-dioxo-4-phenylbutanoic acid (DPBA) is a subject of interest in pharmaceutical research, particularly in developing new drugs targeting viral and bacterial infections. Complexation with metal ions can improve the stability and solubility of organic compounds. The present study uses quantum chemical calculations to explore the structural and electronic results arising from the interaction between the metal cation (Fe2+) and the π-system of DPBA in different solvents. For this purpose, the analyses of atoms in molecules (AIM) and natural bond orbital (NBO) are employed to comprehend the interaction features and the charge delocalization during the process of complexation. The results demonstrate that the strongest/weakest interactions are evident when the complex is situated in non-polar/polar solvents, respectively. In addition, the investigated complex exhibits two intramolecular hydrogen bonds (IMHBs) characterized by the O-H···O motif. The results indicate that the HBs present in the complex fall within the category of weak to medium HBs. Moreover, the O-H···O HBs are influenced by cation-π interactions, which can increase/decrease their strength in polar/non-polar solvents. To enhance understanding of the interactions above, an examination is conducted on various physical properties including the energy gap, electronic chemical potential, chemical hardness, softness, and electrophilicity power.

METHOD

All calculations are conducted within the density functional theory (DFT) using the ωB97XD functional and 6-311 +  + G(d,p) basis set. The computations are performed using the quantum chemistry package GAMESS, and the obtained results are visualized by employing the GaussView program.

Unlocking the Luminescent Potential of Fish-Scale-Derived Carbon Nanoparticles for Multicolor Conversion

This study introduces a novel approach to addressing environmental issues by developing fish-scale carbon nanoparticles (FSCNPs) with a wide range of colors from discarded fish scales. The process involves hydrothermally synthesizing raw tamban (Sardinella) fish scales sourced from Universal Canning, Inc. in Zamboanga City, Philippines. The optimization of the synthesis was achieved using the response surface methodology with a Box-Behnken design. The resulting FSCNPs exhibited unique structural and chemical properties akin to carbonized polymer dots, enhancing their versatility. The solid-state fluorescence of these nanoparticles can be modulated by varying their concentration in a polyvinylpyrrolidone matrix, yielding colors such as blue, green, yellow, and red-orange with Commission Internationale de l'Eclairage coordinates of (0.23, 0.38), (0.32, 0.43), (0.37, 0.43), and (0.46, 0.48), respectively. An analysis of the luminescence mechanism highlights cross-linking emissions, aggregation-induced emissions, and non-covalent interactions, which contribute to concentration-dependent fluorescence and tunable emission colors. These optical characteristics suggest that FSCNPs have significant potential for diverse applications, particularly in opto-electronic devices.

Quadrupolar dinuclear hypervalent tin(iv) compounds with near-infrared emission consisting of Schiff bases based on π-conjugated scaffolds

Since π-conjugated molecules are commonly used as a scaffold for constructing optoelectronic and functional materials, much effort has been devoted to exploring novel molecular scaffolds for obtaining superior properties. This study focuses on dinuclear hypervalent tin(iv) compounds prepared by the ladderization of Schiff bases using hypervalent tin units. The optical measurements found that introducing hypervalent tin atoms can reinforce the D-π-A system. We synthesized two types of dinuclear hypervalent compounds by simple condensation reactions and observed near-infrared (NIR) emission. Also, depending on the direction of the imine bonds, these molecules had different quadrupolar orientations with D-π-A-π-D and A-π-D-π-A systems followed by negative solvatochromism, which is the unique behavior of quadrupolar-derived absorption. Furthermore, the π-conjugated polymers involving dinuclear compounds showed NIR emission in the wavelength range over 800 nm owing to the distinct expansion of π-conjugation. Our findings could be useful not only for constructing electronic structures with narrow energy gaps but also for designing molecules with unique electronic states and environmental responsiveness.

Ultralow thermal conductivity and thermally-deactivated electrical transport in a 1D silver array with alternating δ-bonds

We report the synthesis of a (TMA)AgBr2 (TMA = tetramethylammonium) crystal, which comprises inorganic anionic chains of -(AgBr2)∝- stabilized by columnar stacks of organic TMA cations with a periodic arrangement of shorter and longer Ag(i)⋯Ag(i) bonds, even though all the Ag(i) ions are chemically equivalent. The presence of two chemically non-equivalent bridging Br ions is attributed to the primary cause of such an unusual arrangement, as clearly visualized in the charge density plot of (TMA)AgBr2 extracted from the theoretical calculations based on density functional theory. Remarkably, we identified from the orbital-projected density of states the existence of alternate δ-like bonding involving d xy orbitals of 4d10 Ag(i), which was attributed to the cause for ultralow thermal conductivity and thermally-deactivated electrical transport in (TMA)AgBr2. Barring the energetics, our observations on the existence of a δ-bond will shed new light in understanding the nature of metal-metal chemical bonding and its unprecedented implications.

Discovering trends in the Lewis acidity of beryllium and magnesium hydrides and fluorides with increasing clusters size

We have reported in the last years the strong effect that Be- and Mg-containing Lewis acids have on the intrinsic properties of typical bases, which become acids upon complexation. In an effort to investigate these changes when the Be and Mg derivatives form clusters of increasing size, we have examined the behavior of the (MX2)n (M = Be, Mg; X = H, F; n = 1, 2, 3) clusters when they interact with ammonia, methanimine, hydrogen cyanide and pyridine, and with their corresponding deprotonated forms. The complexes obtained at the M06-2X/aug-cc-pVTZ level were analyzed using the MBIE energy decomposition formalism, in parallel with QTAIM, ELF, NCIPLOT and AdNDP analyses of their electron density. For n = 1 the interaction enthalpy for the different families of monomers, Be (Mg) hydrides and Be (Mg) fluorides, follows the same trend as the intrinsic basicity of the base that interacts with them. This interaction is greatly reinforced after the deprotonation of the base, resulting in a significant enhancement of the intrinsic acidity of the corresponding MX2-Base complex. For (MX2)2 clusters a further reinforcement of the interaction with the base is observed, this reinforcement being again larger for the deprotonated complexes. However, the concomitant increase of their intrinsic acidity is one order of magnitude larger for hydrides than for fluorides. Unexpectedly, the cyclic conformers (MX2)3, which are more unstable than the linear ones, become the global minima after association with the base and the same is true for the deprotonated complex. Accordingly, a further increase of the intrinsic acidity of the (MX2)3-Base complexes with respect to the (MX2)2-Base ones is observed. This effect is maximum for (MgF2)3 clusters, to the point that the (MgF2)3-Base complexes become more acidic than nitric acid, the extreme case being the cluster (MgF2)3-NCH, whose acidity is higher than that of perchloric acid.

Non-covalent planarizing interactions yield highly ordered and thermotropic liquid crystalline conjugated polymers

Controlling the multi-level assembly and morphological properties of conjugated polymers through structural manipulation has contributed significantly to the advancement of organic electronics. In this work, a redox active conjugated polymer, TPT-TT, composed of alternating 1,4-(2-thienyl)-2,5-dialkoxyphenylene (TPT) and thienothiophene (TT) units is reported with non-covalent intramolecular S⋯O and S⋯H-C interactions that induce controlled main-chain planarity and solid-state order. As confirmed by density functional theory (DFT) calculations, these intramolecular interactions influence the main chain conformation, promoting backbone planarization, while still allowing dihedral rotations at higher kinetic energies (higher temperature), and give rise to temperature-dependent aggregation properties. Thermotropic liquid crystalline (LC) behavior is confirmed by cross-polarized optical microscopy (CPOM) and closely correlated with multiple thermal transitions observed by differential scanning calorimetry (DSC). This LC behavior allows us to develop and utilize a thermal annealing treatment that results in thin films with notable long-range order, as shown by grazing-incidence X-ray diffraction (GIXD). Specifically, we identified a first LC phase, ranging from 218 °C to 107 °C, as a nematic phase featuring preferential face-on π-π stacking and edge-on lamellar stacking exhibiting a large extent of disorder and broad orientation distribution. A second LC phase is observed from 107 °C to 48 °C, as a smectic A phase featuring sharp, highly ordered out-of-plane lamellar stacking features and sharp tilted backbone stacking peaks, while the structure of a third LC phase with a transition at 48 °C remains unclear, but resembles that of the solid state at ambient temperature. Furthermore, the significance of thermal annealing is evident in the ∼3-fold enhancement of the electrical conductivity of ferric tosylate-doped annealed films reaching 55 S cm-1. More importantly, thermally annealed TPT-TT films exhibit both a narrow distribution of charge-carrier mobilities (1.4 ± 0.1) × 10-2 cm2 V-1 s-1 along with a remarkable device yield of 100% in an organic field-effect transistor (OFET) configuration. This molecular design approach to obtain highly ordered conjugated polymers in the solid state affords a deeper understanding of how intramolecular interactions and repeat-unit symmetry impact liquid crystallinity, solution aggregation, solution to solid-state transformation, solid-state morphology, and ultimately device applications.

Hybridization of short-range and long-range charge transfer boosts room-temperature phosphorescence performance

At present, mainstream room-temperature phosphorescence (RTP) emission relies on organic materials with long-range charge-transfer effects; therefore, exploring new forms of charge transfer to generate RTP is worth studying. In this work, indole-carbazole was used as the core to ensure the narrowband fluorescence emission of the material based on its characteristic short-range charge-transfer effect. In addition, halogenated carbazoles were introduced into the periphery to construct long-range charge transfer, resulting in VTCzNL-Cl and VTCzNL-Br. By encapsulating these phosphors into a robust host (TPP), two host-guest crystalline systems were further developed, achieving efficient RTP performance with phosphorescence quantum yields of 26% and phosphorescence lifetimes of 3.2 and 39.2 ms, respectively.

Inducing Platinophilic Interactions in [Pt(SCN)4]2- Salts by Cation Tuning

A series of simple [Pt(SCN)4]2- salts with a variety of cations was synthesized and characterized using X-ray crystallography to determine factors that could induce platinophilic interactions between [Pt(SCN)4]2- anions, including cation size and shape, charge, and ability to participate in hydrogen bonding. The salts [N(PPh3)2]2[Pt(SCN)4], [AsPh4]2[Pt(SCN)4], and [Co(1,10-phenanthroline)3][Pt(SCN)4] feature bulky, noncoordinating cations where the [Pt(SCN)4]2- anions are completely separated from each other, with no Pt-Pt interactions present. Salts containing the hydrogen-bonding cations [Co(NH3)6]2[Pt(SCN)4]3 and [Co(en)3]2[Pt(SCN)4]3 (en = 1,2-ethylenediamine) display close Pt-Pt distances, with both compounds exhibiting platinophilic interactions with distances of 3.373(2) and 3.539(8) Å, respectively, the first reported platinophilic interactions with the [Pt(SCN)4]2- unit. [Co(en)3]2[Pt(SCN)4]3 also presents intermolecular chalcogen S···S and Pt···S interactions, resulting in increased dimensionality while also assisting in assembling the platinophilic interaction. The compounds are emissive at 77 K in the solid state, exhibiting a d-d metal-centered transition regardless of whether or not any platinophilic interactions are present. Overall, hydrogen-bonding cations are most likely to promote close proximity of the Pt(II) metal centers and induce the formation of platinophilic interactions in [Pt(SCN)4]2-.

Insight into Impacts of π-π Assembly on Phthalocyanine Based Heterogeneous Molecular Electrocatalysis

Electrochemical CO2 reduction (CO2R) to feedstocks competes with the hydrogen evolution reaction (HER). Cobalt phthalocyanine (CoPc) immobilized onto carbon driven by π-π interaction represents a classical type of heterogeneous molecular catalyst for CO2R. However, the impacts of π conjugation on the electrocatalysis have not been clarified. Herein, the electrochemical properties of CoPc were investigated by comparison of its analogue to 2,3-naphthalocyanine cobalt (NapCo) having extended π conjugation. It is found that CoPc is redox-active on carbon to provide low oxidized Co sites for improving the CO2R activity and selectivity, while NapCo on carbon turned out to be redox-inert leading to lower performance. In addition, the redox-mediated mechanism for CO2R on CoPc tends to operate with increasing electrolyte alkalinity, which further enhances the reaction selectivity. We speculated that moderate π conjugation allows the redox-mediated mechanism on CoPc, which is critical to promote CO2R performance while depressing the competing HER.

Iodomethane in C1 chemistry: application in palladium-catalyzed [2 + 2 + 1] annulation

An efficient palladium-catalyzed [2 + 2 + 1] annulation of 3-iodochromones, bridged olefins, and iodomethane is described, affording a range of chromone-containing polycyclic compounds. Additionally, the corresponding deuterated products were smoothly obtained with iodomethane-d3 instead of iodomethane. Moreover, the synthetic utility of this method is further substantiated by gram scale preparation and application to late-stage modification of estrone.

Demonstration of π-π Stacking at Interfaces: Synthesis of an Indole-Modified Monodisperse Silica Microsphere SiO2@IN

In the present study, a novel silane coupling agent, designated INSi, was synthesized via a facile synthetic route, incorporating indole-functional moieties. This agent was further employed for the surface modification of homemade silica nanomicrospheres (SMPs). The ensuing nanomicrosphere composite, denoted as SiO2@IN, exemplified pronounced interfacial π-π interactions. Optimization of the reaction conditions was conducted using the response surface optimization technique. Subsequent validation of interfacial π-π interactions was accomplished through a synergistic approach, integrating theoretical calculations and comprehensive analyses of spectral and morphological attributes exhibited by the SiO2@IN.

Weakly Bound Complexes of γ-Butyrolactone with Water as Observed in Matrix Isolation FTIR and Theoretical Calculations

A computational and spectroscopic analysis of weakly bound complexes of 1:1 γ-butyrolactone with water has been completed. In this work, multiple density-functional theories and perturbation theory were used to explore the energy-landscape of the complex. Four unique structures were identified in this analysis. One structure was characterized by the formation of a water to carbonyl hydrogen bond and the other three were formed from water to ester hydrogen bonds. The carbonyl-bound conformation was found to be the global minimum across a comprehensive panel of calculations. A wave function analysis demonstrated that the structures were additionally stabilized by weak van der Waals interactions. FTIR spectroscopy of matrix-isolated samples indicated the presence of at least two of the calculated geometries. The structures were identified to be a carbonyl-bound and at least one ester-bound structure. The transitions identified for the carbonyl-bound complex were noted to be significantly more intense than those of the ester bound, indicating greater prevalence in the matrix.

Luminescent Ruthenium-Terpyridine Complexes Coupled with Stilbene-Appended Naphthalene, Anthracene, and Pyrene Motifs Demonstrate Fluoride Ion Sensing and Reversible Trans-Cis Photoisomerization

A new family of luminescent heteroleptic Ru(II)-terpyridine complexes coupled with stilbene-appended naphthalene, anthracene, and pyrene motifs is reported. Each of the complexes features moderately intense emission at room temperature having a lifetime of 16.7 ns for naphthalene and 11.4 ns for anthracene, while a substantially elevated lifetime of 8.3 μs was observed for the pyrene derivative. All the three complexes display a reversible couple in the positive potential window due to Ru2+/Ru3+ oxidation but multiple reversible and/or quasi-reversible peaks in the negative potential domain because of the reduction of the terpyridine moieties. All the complexes selectively sense F- among the studied anions via the intermediary of different noncovalent interactions. The interaction event is monitored through absorption, emission, and 1H and 19F NMR spectroscopy. Additionally, upon utilizing the stilbene motif, reversible trans-cis isomerization of the complexes has been undertaken upon alternate treatment of visible and UV light so that the complexes can act as potential photomolecular switches. We also carried out the anion sensing characterization of the cis form of the complexes. Theoretical calculation employing density functional theory is also executed for a selective complex (naphthalene derivative) to elucidate different noncovalent interactions that are operative during the complex-fluoride interplay.

Cobalt group transition metals (TM: Co, Rh, Ir) coordination of S-doped porphyrins (TM_S@PPR) as sensors for molecular SO2 gas adsorption: a DFT and QTAIM study

CONTEXT

The intricate challenges posed by SO2 gas underscore the imperative for meticulous monitoring and detection due to its adverse effects on health, the environment, and equipment integrity. Hence, this research endeavors to delve deeply into the intricate realm of transition-metals functionalized sulfur-doped porphyrins (S@PPR) surfaces through a comprehensive computational study. The electronic properties revealed that upon adsorption, Ir_S@PPR surface reflects the least energy gap of 0.109 eV at the O-site of adsorptions, indicating an increase in electrical conductivity which is a better adsorption trait. Owing to the negative adsorption energy observed, the adsorption behavior is described as chemisorption, with the greatest adsorption energy of - 10.306 eV for Ir_S@PPR surface at the S-site of adsorption. Based on the mechanistic attributes, iridium-functionalized S@PPR surface is a promising detecting material towards the sensing of SO2 gas. This report will provide useful insight for experimental researchers in selecting and engineering materials to be used as detectors for SO2 gas pollutant.

METHOD

All theoretical investigations were carried out using density functional theory (DFT), calculated at PW6B95-D3/GenECP/Def2svp/LanL2DZ computational method.

Ortho-Substituent Effects on Halogen Bond Geometry for N-Haloimide⋯2-Substituted Pyridine Complexes

The nature of (imide)N-X⋯N(pyridine) halogen-bonded complexes formed by six N-haloimides and sixteen 2-substituted pyridines are studied using X-ray crystallography (68 crystal structures), Density Functional Theory (DFT) (86 complexation energies), and NMR spectroscopy (90 association constants). Strong halogen bond (XB) donors such as N-iodosuccinimide form only 1:1 haloimide:pyridine crystalline complexes, but even stronger N-iodosaccharin forms 1:1 haloimide:pyridine and three other distinct complexes. In 1:1 haloimide:pyridine crystalline complexes, the haloimide's N─X bond exhibits an unusual bond bending feature that is larger for stronger N-haloimides. DFT complexation energies (ΔEXB ) for iodoimide-pyridine complexes range from -44 to -99 kJ mol-1 , while for N-bromoimide-pyridine, they are between -31 and -77 kJ mol-1 . The ΔEXB of I⋯N XBs in 1:1 iodosaccharin:pyridine complexes are the largest of their kind, but they are substantially smaller than those in [bis(saccharinato)iodine(I)]pyridinium salts (-576 kJ mol-1 ), formed by N-iodosaccharin and pyridines. The NMR association constants and ΔEXB energies of 1:1 haloimide:pyridine complexes do not correlate as these complexes in solution are heavily influenced by secondary interactions, which DFT studies do not account for. Association constants follow the σ-hole strengths of N-haloimides, which agree with DFT and crystallography data. The haloimide:2-(N,N-dimethylamino)pyridine complex undergoes a halogenation reaction resulting in 5-iodo-2-dimethylaminopyridine.

Phenylbenzothiazole-Based Platinum(II) and Diplatinum(II) and (III) Complexes with Pyrazolate Groups: Optical Properties and Photocatalysis

Based on 2-phenylbenzothiazole (pbt) and 2-(4-dimethylaminophenyl)benzothiazole (Me2N-pbt), mononuclear [Pt(pbt)(R'2-pzH)2]PF6 (R'2-pzH = pzH 1a, 3,5-Me2pzH 1b, 3,5-iPr2pzH 1c) and diplatinum (PtII-PtII) [Pt(pbt)(μ-R'2pz)]2 (R'2-pz = pz 2a, 3,5-Me2pz 2b, 3,5-iPr2pz 2c) and [Pt(Me2N-pbt)(μ-pz)]2 (3a) complexes have been prepared. In the presence of sunlight, 2a and 3a evolve, in CHCl3 solution, to form the PtIII-PtIII complexes [Pt(R-pbt)(μ-pz)Cl]2 (R = H 4a, NMe2 5a). Experimental and computational studies reveal the negligible influence of the pyrazole or pyrazolate ligands on the optical properties of 1a-c and 2a,b, which exhibit a typical 3IL/3MLCT emission, whereas in 2c the emission has some 3MMLCT contribution. 3a displays unusual dual, fluorescence (1ILCT or 1MLCT/1LC), and phosphorescence (3ILCT) emissions depending on the excitation wavelength. The phosphorescence is lost in aerated solutions due to sensitization of 3O2 and formation of 1O2, whose determined quantum yield is also wavelength dependent. The phosphorescence can be reversibly photoinduced (365 nm, ∼ 15 min) in oxygenated THF and DMSO solutions. In 4a and 5a, the lowest electronic transitions (S1-S3) have mixed characters (LMMCT/LXCT/L'XCT 4a and LMMCT/LXCT/ILCT 5a) and they are weakly emissive in rigid media. The 1O2 generation property of complex 3a is successfully used for the photooxidation of p-bromothioanisol showing its potential application toward photocatalysis.

Rapid Charge Transfer Enabled by Noncovalent Interaction through Guest Insertion in Supercapacitors based on Covalent Organic Frameworks

Covalent organic frameworks (COFs) have been proposed for electrochemical energy storage, although the poor conductivity resulted from covalent bonds limits their practical performance. Here, we propose to introduce noncovalent bonds in COFs through a molecular insertion strategy for improving the conductivity of the COFs as supercapacitor. The synthesized COFs (MI-COFs) establish equilibriums between covalent bonds and noncovalent bonds, which construct a continuous charge transfer channel to enhance the conductivity. The rapid charge transfer rate enables the COFs to activate the redox sites, bringing about excellent electrochemical energy storage behavior. The results show that the MI-COFs exhibit much better performance in specific capacitance and capacity retention rate than those of most COFs-based supercapacitors. Moreover, through simply altering inserted guests, the mode and strength of noncovalent bond can be adjusted to obtain different energy storage characteristics. The introduction of noncovalent bonds is an effective and flexible way to enhance and regulate the properties of COFs, providing a valuable direction for the development of novel COFs-based energy storage materials.

Efficient Iodine Uptake of Ultra Thermally Stable Conjugated Copolymers Bearing Biaceanthrylenyl Moieties and Contorted Aromatic Units Using a [3 + 2] Palladium-Catalyzed Cyclopolymerization Reaction

A novel series of copolymers made from alternating aromatic surrogates with contorted and spiro compounds, denoted as BCP1-3, was successfully synthesized employing a palladium-catalyzed one-pot [3 + 2] cyclopentannulation reaction. The resulting copolymers BCP1-3, which were isolated in high yields, exhibited weight-average molecular weights (Mw) ranging from 11.0 to 61.5 kg mol-1 (kDa) and polydispersity index (Mw/Mn) values in the range of 1.7 and 2.0, which suggest a narrow molecular weight distribution, thus indicating the formation of uniform copolymer chains. Investigation of the thermal properties of BCP1-3 by thermogravimetric analysis disclosed outstanding stability with 10% weight loss temperature values reaching 800 °C. Iodine adsorption tests revealed remarkable results, particularly for BCP2, which demonstrated a strong affinity toward iodine reaching an uptake of 2900 mg g-1. Additionally, recyclability tests showcased the effective regeneration of BCP2 after several successive iodine adsorption-desorption cycles.

Nanotechnology for brain tumor imaging and therapy based on π-conjugated materials: state-of-the-art advances and prospects

In contemporary biomedical research, the development of nanotechnology has brought forth numerous possibilities for brain tumor imaging and therapy. Among these, π-conjugated materials have garnered significant attention as a special class of nanomaterials in brain tumor-related studies. With their excellent optical and electronic properties, π-conjugated materials can be tailored in structure and nature to facilitate applications in multimodal imaging, nano-drug delivery, photothermal therapy, and other related fields. This review focuses on presenting the cutting-edge advances and application prospects of π-conjugated materials in brain tumor imaging and therapeutic nanotechnology.

Building Block Engineering toward Realizing High-Performance Electrochromic Materials and Glucose Biosensing Platform

The molecular engineering of conjugated systems has proven to be an effective method for understanding structure-property relationships toward the advancement of optoelectronic properties and biosensing characteristics. Herein, a series of three thieno[3,4-c]pyrrole-4,6-dione (TPD)-based conjugated monomers, modified with electron-rich selenophene, 3,4-ethylenedioxythiophene (EDOT), or both building blocks (Se-TPD, EDOT-TPD, and EDOT-Se-TPD), were synthesized using Stille cross-coupling and electrochemically polymerized, and their electrochromic properties and applications in a glucose biosensing platform were explored. The influence of structural modification on electrochemical, electronic, optical, and biosensing properties was systematically investigated. The results showed that the cyclic voltammograms of EDOT-containing materials displayed a high charge capacity over a wide range of scan rates representing a quick charge propagation, making them appropriate materials for high-performance supercapacitor devices. UV-Vis studies revealed that EDOT-based materials presented wide-range absorptions, and thus low optical band gaps. These two EDOT-modified materials also exhibited superior optical contrasts and fast switching times, and further displayed multi-color properties in their neutral and fully oxidized states, enabling them to be promising materials for constructing advanced electrochromic devices. In the context of biosensing applications, a selenophene-containing polymer showed markedly lower performance, specifically in signal intensity and stability, which was attributed to the improper localization of biomolecules on the polymer surface. Overall, we demonstrated that relatively small changes in the structure had a significant impact on both optoelectronic and biosensing properties for TPD-based donor-acceptor polymers.

Halogen bonds, chalcogen bonds, pnictogen bonds, tetrel bonds and other σ-hole interactions: a snapshot of current progress

We report here on the status of research on halogen bonds and other σ-hole interactions involving p-block elements in Lewis acidic roles, such as chalcogen bonds, pnictogen bonds and tetrel bonds. A brief overview of the available literature in this area is provided via a survey of the many review articles that address this field. Our focus has been to collect together most review articles published since 2013 to provide an easy entry into the extensive literature in this area. A snapshot of current research in the area is provided by an introduction to the virtual special issue compiled in this journal, comprising 11 articles and entitled `Halogen, chalcogen, pnictogen and tetrel bonds: structural chemistry and beyond.'