Uranium extraction from seawater: material design, emerging technologies and marine engineering

Facile and scalable synthesis of functionalized hierarchical porous polymers for efficient uranium adsorption

Efficient uranium capture from wastewater holds great importance for the environmental remediation and sustainable development of nuclear energy, but it is a tremendous challenge. Herein, a facile and scalable approach is reported to fabricate functionalized hierarchical porous polymers (PPN-3) decorated with high density of phosphate groups for uranium adsorption. The as-constructed hierarchical porous structure could allow rapid diffusion of uranyl ions, while abundant phosphate groups that serve as adsorption sites could provide the high affinity for uranyl. Consequently, PPN-3 shows a high uranium adsorption uptake of 923.06 mg g-1 and reaches adsorption equilibrium within simply 10 min in uranium-spiked aqueous solution. Moreover, PPN-3 affords selective adsorption of uranyl over multiple metal ions and possesses a rapid and high removal rate of U(VI) in real water systems. Furthermore, this study offers direct polymerization strategy for the cost-effective fabrication of phosphate-functionalized porous organic polymers, which may provide promising application potential for uranium extraction.

Advanced MXene-based materials for efficient extraction of uranium from seawater and wastewater

In order to realize the low-carbon development policy, the large-scale development and utilization of nuclear energy is very essential. Uranium is the key resource for nuclear industry. The extracting and recycling uranium from seawater and nuclear wastewater is necessary for secure uranium reserves, ensure energy security, control pollution and protect the environment. The novel nanomaterial MXene possesses the layered structure, high specific surface area, and modifiable surface terminal groups, which allowed it to enrich uranium. In addition, good photovoltaic and photothermal properties improves the ability to adsorb uranium. The excellent radiation resistance of the MAX phase strongly indicates the potential use of MXene as an effective uranium adsorbent. However, there are relatively few reviews on its application in uranium extraction and recovery. This review focuses on the recent advances in the use of MXene-based materials as highly efficient adsorbents for the recovery of uranium from seawater and nuclear wastewater. First, the structural, synthetic and characterization aspects of MXene materials are introduced. Subsequently, the adsorptive properties of MXene-based materials are evaluated in terms of uranium extraction recovery capability, selectivity, and reproducibility. Furthermore, the interaction mechanisms between uranium and MXene absorbers are discussed. Finally, the challenges for MXene materials in uranium adsorption applications are proposed for better design of new types of MXene-based adsorbents.

New insight into the mechanism of biofouling-resistant thiazole-linked covalent organic frameworks for selective uranium capture from seawater

The extraction of uranium from seawater is crucial for the sustainable production of nuclear fuel. Traditional amidoxime-functionalized adsorbents suffer from competitive adsorption of vanadium ion and biofouling. These challenges motivate the development of novel adsorbents for selective uranium extraction from seawater. Herein, four kinds of thiazole-linked covalent organic frameworks (COFs) were investigated to harvest uranium from seawater. The selectivity and anti-biofouling performance were systematically investigated through the molecular dynamics (MD) simulations. Driven by the pore size sieving effect and electrostatic interaction, the Ca2UO2(CO3)3 complex and vanadate anions were selectively separated by different COFs in special areas. On one hand, benefits from the small steric partition factor, the Ca2UO2(CO3)3 complex can stick on the surface of COFs. On the other hand, the dispersive negatively and positively charged areas of studied COFs work as potential binding sites for the Ca2UO2(CO3)3 complex and vanadate anions, respectively. Moreover, an analysis of pulling force and desorption time between uranium and vanadium ions further confirmed the selectivity of various thiazole-linked COFs. The anti-biofouling property was comparatively investigated by dynamic trajectory and solvent accessible surface area. Our outcomes illustrate that the hydroxyl and zwitterionic groups in the thiazole-linked COFs endow their strong surface hydrations to resist marine biofouling. In particular, the TpBdsaPa is identified as a promising candidate due to charge dispersed zwitterionic group as well as remarkable anti-biofouling ability. The present study sheds an atomic-level understanding of the thiazole-linked COFs for selective uranium uptaking from seawater, which will provide aid to design novel adsorbent with highly selective uranium extraction capacity and strong anti-biofouling property.

Phosphorus Nitride Imide Nanotubes for Uranium Capture from Seawater

Nuclear power plays a pivotal role in the global energy supply. The adsorption-based extraction of uranium from seawater is crucial for the rapid advancement of nuclear power. The phosphorus nitride imide (PN) nanotubes were synthesized in this study using a solvothermal method, resulting in chemically stable cross-linked tubular hollow structures that draw inspiration from the intricate snowflake fractal pattern. Detailed characterization showed that these nanotubes possess a uniformly distributed five-coordinated nanopocket, which exhibited great selectivity and efficiency in binding uranium. PN nanotubes captured 97.34% uranium from the low U-spiked natural seawater (∼355 μg L-1) and showed a high adsorption capacity (435.58 mg g-1), along with a distribution coefficient, KdU > 8.71 × 107 mL g-1. In addition, PN nanotubes showed a high adsorption capacity of 7.01 mg g-1 in natural seawater. The facile and scalable production of PN nanotubes presented in this study holds implications for advancing their large-scale implementation in the selective extraction of uranium from seawater.

Interlayer manipulation of bio-inspired Ti3C2Tx nanocontainer through intercalation of amino acid molecules to dramatically boosting uranyl hijacking capability from seawater

More than 4.5 billion tons of unconventional uranium resources [UO2(CO3)3]4- are uniformly dissolved in seawater, providing a sustainable and abundant fuel source for the development of nuclear energy. Herein, we presented a rational design and development of Ti3C2Tx nanocontainer inspired by the exceptional selectivity and affinity exhibited by superb-uranyl proteins through amino acid intercalation. The amino acid intercalation of Ti3C2Tx demonstrated exceptional UO22+ capture capacity (Arg-Ti3C2Tx, His-Ti3C2Tx, and Lys-Ti3C2Tx with qmax values of 594.46, 846.04, and 1030.17 mg/g). Furthermore, these intercalated materials exhibited remarkable sequestration efficiency and selectivity (Uinitial = ∼45.2 ∼7636 μg/L; ∼84.45% ∼98.08%; and ∼2.72 ×104 ∼1.28 ×105 KdU value), despite the presence of an overwhelming surplus of Na+, Ca2+, Mg2+, and Co2+ ions. Significantly, even in the 0.3 M NaHCO3 solution and surpassing 103-fold of the Na3VO4 system, the adsorption efficiency of Lys-Ti3C2Tx still achieved a remarkable 63.73% and 65.05%. Moreover, the Lys-Ti3C2Tx can extract ∼30.23 ∼8664.03 μg/g uranium after 24 h contact in ∼13.3 ∼5000 μg/L concentration from uranium-spiked natural seawater. The mechanism analysis revealed that the high binding capability can be attributed to the chelation of carboxyl and amino groups with uranyl ions. This innovative state-of-the-art approach in regulating uranium harvesting capability through intercalation of amino acid molecules provides novel insights for extracting uranium from seawater.

Piezo-catalysis in BiFeO3@In2Se3 Heterojunction for High-Efficiency Uranium Removal

Piezo-catalysis emerges as an efficient, safe, and affordable strategy for removing hazardous substances from aquatic environments. Here, the BiFeO3@In2Se3 heterojunction demonstrates remarkable prowess as a piezo-catalyst, enabling the high-efficiency removal of uranium (U) from U(VI)-containing water. A total U(VI) removal efficiency of 94.6% can be achieved under ultrasonic vibration without any sacrificial agents. During the entire catalytic process, piezo-induced electrons, hydroxyl radicals, and superoxide radicals play important roles in U(VI) removal, while the generated H2O2 is responsive to the transformation of soluble U(VI) into insoluble (UO2)O2•2H2O and UO3. Furthermore, auxiliary illumination can accelerate the increase of free charges, enabling the piezo-catalyst to retain more charges. This leads to an improved U(VI) removal efficiency of 98.8% and a significantly increased reaction rate constant. This study offers a comprehensive analysis of the fabrication of high-efficiency piezo-catalysts in the removal or extraction of U(VI) from U(VI)-containing water.

Construction of Layer-Blocked Covalent Organic Framework Heterogenous Films via Surface-Initiated Polycondensations with Strongly Enhanced Photocatalytic Properties

Imine-linked covalent organic frameworks (COFs) usually show high crystallinity and porosity, while vinyl-linked COFs have excellent semiconducting properties and stability. Therefore, achieving the advantages of imine- and vinyl-linkages in a single COF material is highly interesting but remains challenging. Herein, we demonstrate the fabrication of a layer-blocked COF (LB-COF) heterogeneous film that is composed of imine- and vinyl-linkages through two successive surface-initiated polycondensations. In brief, the bottom layer of imine-linked COF film was constructed on an amino-functionalized substrate via Schiff-base polycondensation, in which the unreacted aldehyde edges could be utilized for initiating aldol polycondensation to prepare the second layer of vinyl-linked COF film. The resultant LB-COF film displays excellent ordering due to the crystalline templating effect from the bottom imine-linked COF layer; meanwhile, the upper vinyl-linked COF layer could strongly enhance its stability and photocatalytic properties. The LB COF also presents superior performance in photocatalytic uranium extraction (320 mg g-1), which is higher than the imine-linked (35 mg g-1) and the vinyl-linked (295 mg g-1) counterpart. This study provides a novel surface-initiated strategy to synthesize layer-blocked COF heterogeneous films that combine the advantages of each building block.

Adsorbents for the Uranium Capture from Seawater for a Clean Energy Source and Environmental Safety: A Review

On the global level, uranium is considered the main nuclear energy source, and its removal from terrestrial ores is enough to last until the end of the current century. Therefore, a major focus is attracted toward the capture of uranium from a sustainable source (seawater). Uranium recovery from seawater has been reported over the last few decades, and recently many efforts have been devoted to the preparation of such adsorbents with higher selectivity and adsorption capacity. The purpose of this review is to report the advancement in adsorbent preparation and modification of porous materials. It also discusses challenges such as adsorbent selectivity, low uranium concentration in seawater, contact time, biofouling, and the solution to the problems necessary to ensure a better adsorption performance of the adsorbent.

Enhanced uranium extraction from seawater: from the viewpoint of kinetics and thermodynamics

Uranium extraction from seawater (UES) is recognized as one of the seven pivotal chemical separations with the potential to revolutionize global paradigms. The forthcoming decade is anticipated to witness a surge in UES, driven by escalating energy demands. The oceanic reservoirs, possessing uranium quantities approximately 1000-fold higher than terrestrial mines, present a more sustainable and environmentally benign alternative. Empirical evidence from historical research indicates that adsorption emerges as the most efficacious process for uranium recovery from seawater, considering operational feasibility, cost-effectiveness, and selectivity. Over the years, scientific exploration has led to the development of a plethora of adsorbents with superior adsorption capacity. It would be efficient to design materials with a deep understanding of the adsorption from the perspective of kinetics and thermodynamics. Here, we summarize recent advancements in UES technology and the contemporary challenges encountered in this domain. Furthermore, we present our perspectives on the future trajectory of UES and finally offer our insights into this subject.

A self-driven solar coupling system with TiO2@MXene cathode for effectively eliminating uranium and organics from complex wastewater accompanying with electricity generation

The inevitable organic matters in radioactive wastewater and contaminated waters pose great challenge in uranium recycling by traditional techniques. Here, a self-driven solar coupling system (SSCS), which was assembled by a TiO2 @MXene/CF cathode and a monolithic photoanode, was proposed for synergistically recycling uranium and degrading organics from complex radioactive wastewater, combining with electricity production. The TiO2 @MXene/CF was prepared via a simple annealing process with in-situ derived TiO2 nanoparticles decorated Ti3C2 MXene coated on carbon felt (CF). Under sunlight illumination, the photoanode captured electrons of organics, and drove electrons to the TiO2 @MXene/CF, which exhibited an exceptional UO22+ adsorption and reduction capacity because TiO2 nanoparticles provided plenty of surface hydroxyl groups for UO22+ adsorption, and the unique two-dimensional MXene facilitated the charge transfer. The SSCS with TiO2 @MXene/CF removed almost 100% UO22+ and organics with rate constants of ∼21 and ∼6.9 times those of the system with CF, accompanying with excellent power output (∼1000 μW·cm-2). The fixed uranium on TiO2 @MXene/CF was effectively reduced into insoluble UO2 (91.1%), and no obvious decay was observed after 15 repeated uses. This study proposes a multi-functional and easy-operated way for remediating radioactive wastewater and contaminated waters, and gives valuable insights in designing cathode materials for uranium reduction.

Functionalized hydrogen-bonded organic superstructures via molecular self-assembly for enhanced uranium extraction

Effective uranium extraction from water is essential for the development of nuclear power industry and the protection of human health and environment. Nevertheless, it still remains challenging to realize efficient and cost-effective uranium extraction. Herein, a fast and simple method for the direct fabrication of novel functionalized hydrogen-bonded organic superstructures via molecular self-assembly is reported. The as-constructed flower-like superstructures (MCP-5) can allow the exposure of adsorption sites and facilitate the transport of uranyl ions, while synergism between amino and phosphate groups can realize selective uranium extraction. Consequently, MCP-5 possesses excellent uranium adsorption ability with a high saturated adsorption capacity of 950.52 mg g-1, high utilization rate of adsorption sites and adsorption equilibrium time of simply 5 min in uranium-spiked aqueous solution. Furthermore, MCP-5 offers selective uranium adsorption over a broad range of metal ions. The facile synthesis and low-cost raw materials make it have promising potential for uranium capture. Simultaneously, this study opens a design avenue of functionalized hydrogen-bonded organic material for efficient uranium extraction.

Emerging Nanomaterials toward Uranium Extraction from Seawater: Recent Advances and Perspectives

Nuclear energy holds great potential to facilitate the global energy transition and alleviate the increasing environmental issues due to its high energy density, stable energy output, and carbon-free emission merits. Despite being limited by the insufficient terrestrial uranium reserves, uranium extraction from seawater (UES) can offset the gap. However, the low uranium concentration, the complicated uranium speciation, the competitive metal ions, and the inevitable marine interference remarkably affect the kinetics, capacity, selectivity, and sustainability of UES materials. To date, massive efforts have been made with varying degrees of success to pursue a desirable UES performance on various nanomaterials. Nevertheless, comprehensive and systematic coverage and discussion on the emerging UES materials presenting the fast-growing progress of this field is still lacking. This review thus challenges this position and emphatically focuses on this topic covering the current mainstream UES technologies with the emerging UES materials. Specifically, this review elucidates the causality between the physiochemical properties of UES materials induced by the intellectual design strategies and the UES performances and further dissects the relationships of materials-properties-activities and the corresponding mechanisms in depth. This review is envisaged to inspire innovative ideas and bring technical solutions for developing technically and economically viable UES materials.

Strong Electron Transfer in Covalently Integrating Cu(I)-Organic Frameworks Enabling Effective Radionuclide Capture

Rational construction of strong electron-transfer materials remains a challenging task. Herein, we show a design rule for the construction of strong electron-transfer materials through covalently integrating electron-donoring Cu(I) clusters and electron-withdrawing triazine monomers together. As expected, Cu-CTF-1 (Cu(I)-triazine framework) was found to enable strong electron transfer up to 0.46|e| from each Cu(I) metal center to each adjacent triazine fragment. This finally leads to good spatial separation in both photogenerated electron-hole pairs and function units for photocatalytic uranium reduction under ambience and no sacrificial agent and to good charge separation of [I+][I5-] for I2 immobilization under extremely rigorous conditions. The results have not only opened up a structural design principle to access electron-transfer materials but also solved several challenging tasks in the field of radionuclide capture and CTFs.

MOF-derived Co-Ni layered double hydroxides/polyethyleneimine modified chitosan micro-nanoreactor for high-efficiency capture of uranium from seawater

The preparation of powder adsorbent into microsphere adsorbent is one of the effective methods for the industrialization of uranium extraction from seawater. Herein, a MOF-derived Co-Ni layered double hydroxides/polyethyleneimine modified chitosan micro-nanoreactor (DNPM) was prepared by a simple method in this work. The microstructure and chemical structure of DNPM were comprehensively characterized. The pH value, adsorption time, initial solution concentration, temperature, competitive ions, regeneration performance, and bed column heights were investigated for the adsorption performance of DNPM by batch adsorption and fixed-bed column continuous adsorption experiments. When the contact time was 8 h, the initial concentration was 150 mg/L, and the pH value was 6, the adsorption capacity of DNPM was 334.67 mg/g. The uranium adsorption by DNPM fits with the pseudo-second-order kinetic and Langmuir models, which was a spontaneous and endothermic process. In addition, DNPM has good adsorption selectivity and reusability. The fixed-bed column continuous adsorption experiment shows that the adsorption capacity increased with the increase of bed column height. The adsorption mechanism can be attributed to coordination chelation and electrostatic interaction. In general, this work provides an effective strategy for developing environmentally friendly uranium adsorbent that can be industrially used.

Synergistic adsorption and photocatalysis reduction of uranium by UiO-66 (Ce)-CdS/PEI-modified chitosan composite sponge

Uranium is a critical element of the nuclear industry, and while extracting it from seawater is considered the most promising way to meet the growing demand for uranium, there are still some problems that still need to be solved. This work designed a UiO-66(Ce)-CdS/PEI-modified chitosan composite sponge (USPS) with an adsorption-photocatalytic synergistic effect to extract uranium efficiently. On the one hand, the drawback that the powder material is difficult to be recycled is solved. On the other hand, the uranium extraction capacity of the substrate sponge is improved. Compared with the unmodified PCS sponge, the uranium extraction capacity of the USPS-4 composite sponge is 1.63 fold higher than that of the PCS sponge. In addition, the USPS-4 composite sponge exhibits excellent selectivity and regenerability. The mechanism of uranium extraction can be summarized as the coordination chelation of uranium with active functional groups in the adsorption process and the reduction of hexavalent uranium by photogenerated electrons in the photocatalytic process. This study provides a new strategy for designing and preparing a novel material with high uranium extraction performance, easy separation, and recovery.

Self-Standing Porous Aromatic Framework Electrodes for Efficient Electrochemical Uranium Extraction

Electrochemical uranium extraction from seawater provides a new opportunity for a sustainable supply of nuclear fuel. However, there is still room for studying flexible electrode materials in this field. Herein, we construct amidoxime group modified porous aromatic frameworks (PAF-144-AO) on flexible carbon cloths in situ using an easy to scale-up electropolymerization method followed by postdecoration to fabricate the self-standing, binder-free, metal-free electrodes (PAF-E). Based on the architectural design, adsorption sites (amidoxime groups) and catalytic sites (carbazole groups) are integrated into PAF-144-AO. Under the action of an alternating electric field, uranyl ions are selectively captured by PAN-E and subsequently transformed into Na2O(UO3·H2O)x precipitates in the presence of Na+ via reversible electron transfer, with an extraction capacity of 12.6 mg g-1 over 24 days from natural seawater. This adsorption-electrocatalysis mechanism is also demonstrated at the molecular level by ex situ spectroscopy. Our work offers an effective approach to designing flexible porous organic polymer electrodes, which hold great potential in the field of electrochemical uranium extraction from seawater.

Highly Selective Extraction of U(VI) from Solutions by Metal Organic Framework-Based Nanomaterials through Sorption, Photochemistry, and Electrochemistry Strategies

With the rapid development of nuclear technology and peaceful utilization of nuclear energy, plentiful U(VI) not only is required to be extracted from solutions for a sustainable nuclear fuel supply but also is inevitably released into the surrounding environment to result in pollution and threaten human health. Thereby, realizing selective extraction of U(VI) from aqueous solutions is crucial for U(VI) pollution control and a sustainable nuclear industry. Metal organic frameworks (MOFs) have gained multidisciplinary attention due to their excellent properties including large specific surface areas, tunable pore structures, easy functionalization, etc. This Review comprehensively summarizes the research progress of MOFs and MOF-based materials on U(VI) removal from aqueous solutions by sorption, photocatalysis, electrocatalysis, membrane separation, etc. The efficient high extraction ability is dependent on the intrinsic properties of MOFs and the techniques used. The removal properties of MOF-based materials as adsorbents, photocatalysts, and electrocatalysts for U(VI) are discussed. Information about the interaction mechanisms between U(VI) and MOF-based materials are analyzed in-depth, including experiments, theoretical calculations, and advanced spectroscopy analysis. The removal properties for U(VI) of various MOF-based materials are assessed through different techniques. Finally, a summary and perspective on the direction and challenges of MOF-based materials and various pollutant removal technologies are proposed to provide some significant information on designing and fabricating MOF-based materials for environmental pollution management.

Biomimetic Helical Hydrogen Bonded Organic Framework Membranes for Efficient Uranium Recovery from Seawater

Inspired by the uranyl-imidazole interactions via nitrogen's (N's) of histidine residues in single helical protein assemblies with open framework geometry that allows through migration/coordination of metal ions. Here, preliminary components of a stable hydrogen-bonded organic framework (HOF) are designed to mimic the stable single helical open framework with imidazole residues available for Uranium (U) binding. The imidazolate-HOF (CSMCRI HOF2-S) is synthesized with solvent-directed H-bonding in 1D array and tuned hydrophobic CH-π interactions leading to single helix pattern having enhanced hydrolytic stability. De-solvation led CSMCRI HOF2-P with porous helical 1D channels are transformed in a freestanding thin film that showcased improved mass transfer and adsorption of uranyl carbonate. CSMCRI HOF2-P thin film can effectively extract ≈14.8 mg g-1 in 4 weeks period from natural seawater, with > 1.7 U/V (Uranium to Vanadium ratio) selectivity. This strategy can be extended for rational designing of hydrolytically stable, U selective HOFs to realize the massive potential of the blue economy toward sustainable energy.

pH-Dependent Dual-Mode Detection toward Uranium by a Zinc-Tetraphenylethylene Fluorescent Metal-Organic Framework

An interpenetrated tetraphenylethylene-based fluorescent metal-organic framework (ECUT-180) with exceptional sensitivity, excellent selectivity, and fast response (less than 30 s) toward uranium was successfully prepared. Especially, in the prescence of uranyl, ECUT-180 displays significant fluorescence turn-on under pH 2-3, while fluorescence turn-off under pH 4-8. The corresponding detection limits were determined to be 2.92 ppb at pH 2 and 0.86 ppb at pH 8, both of which are lower than the average uranium content (3.3 ppb) in seawater. Mechanism investigation reveals that the fluorescence enhancement on the strong acid condition can be assigned to uranium adsorption, while the quenching is caused by the resonance energy transfer.

In-situ constructing amidoxime groups on metal-free g-C3N4 to enhance chemisorption, light absorption, and carrier separation for efficient photo-assisted uranium(VI) extraction

The development of inexpensive and efficient semiconductor catalysts for photo-assisted uranium extraction from seawater remains a huge challenge. Herein, we have successfully synthesized amidoxime-rich g-C3N4 (AO-C3N4) by simply amidoximing a cyano-rich precursor for photo-assisted uranium extraction from seawater. The amidoxime groups not only served as the U(VI) binding sites for efficient uranium adsorption, but also significantly improved the visible light absorption capacity and carrier separation efficiency via introducing defect energy level, resulting in the excellent photocatalytic activity for AO-C3N4 towards photo-assisted uranium extraction. In the process of photo-assisted uranium extraction, U(VI) was first adsorbed by the amidoxime groups on the AO-C3N4 and then reduced to U(IV), while (UO2)O2·2H2O and (UO2)O2·4H2O were further formed by the oxidation of U(IV) by superoxide radicals (·O2-). Moreover, the generated reactive oxygen species (ROS) under light endowed AO-C3N4 with outstanding antibacterial properties, preventing the limitation of uranium extraction capacity from marine biofouling.

Dual-Ligand ZIF-8 Bearing the Cyano Group for Efficient and Selective Uranium Capture from Seawater

Uranium extraction from seawater is a potential technique that will change the world. Adsorption capacity, selectivity, and antibacterial ability for high-performance uranium adsorbents remain the major challenges. In this study, a dual-ligand zeolitic imidazolate framework 8 (ZIF-8) decorated with cyano groups (ZIF-8-CN) is prepared via a facile blend strategy at room temperature. Owing to the abundant mesopores and nitrogen functional groups, ZIF-8-CN shows an extremely high uranium uptake of 1000 mg/g at pH = 6, which is 2.42 times that of pristine ZIF-8. Noteworthily, ZIF-8-CN possesses a 16.2 mg/g uranium adsorption in natural seawater within 28 days, and the distribution coefficient (Kd = 3.25 × 106 mL/g) is far greater than that for other coexisting metal ions, demonstrating a marked preference for uranyl ions. Except for the coordination between uranium and nitrogen in imidazole, the cyano groups provide additional adsorption sites and preferentially bind to uranyl, thereby strengthening the affinity for uranyl. Notably, ZIF-8-CN displays ultrastrong antimicrobial ability against both Escherichia coli and Staphylococcus aureus, which is greatly desired for the scale-up marine tests. Our study demonstrates the high potential of ZIF-8-CN in uranium capture and provides a wide scope for the application of mixed-ligand MOFs.

Two-Dimensional Sodium Channels with High Selectivity and Conductivity for Osmotic Power Generation from Wastewater

Conducting target ions rapidly while rejecting rival ions efficiently is challenging yet highly demanded for ion separation related applications. Two-dimensional (2D) channels are widely used for ion separation, but highly selective 2D channels generally suffer from a relatively low ionic conductivity. Here we report that the 2D vermiculite channels have a Na+ conductivity higher than bulk and at the same time reject heavy metal ions with a selectivity of a few hundreds. Such performance is attributed to the highly electronegative crystal surface and the extremely narrow channel (0.2 nm high), as also supported by the ab initio molecular dynamics simulation. We demonstrate that the highly selective and conductive sodium channels can be utilized to harvest osmotic power from industrial wastewater, achieving a power density of more than 20 W m-2 while preventing pollution from waste heavy metal ions. This work provides a strategy for wastewater utilization as well as treatment. Moreover, the investigation suggests the possibility to break the ionic permeability-selectivity trade-off by combining Ångstrom-scale confinement with proper surface engineering, which could lead to applications that are challenging for previous materials.

Strengthening Fe(II)/Fe(III) Dynamic Cycling by Surface Sulfation to Achieve Efficient Electrochemical Uranium Extraction at Ultralow Cell Voltage

Electrochemically mediated Fe(II)/Fe(III) redox-coupled uranium extraction can efficiently reduce the cell voltage of electrochemical uranium extraction (EUE). How to regulate the surface structure to enhance the uranium acyl ion adsorption capacity and strengthen the Fe(II)/Fe(III) redox cycle process is crucial for EUE. In this work, we developed surface sulfated nanoreduced iron (S-NRI) for EUE and exhibited improved properties for EUE at an ultralow cell voltage (-0.1 V). Compared with a nanoreduced iron (NRI) adsorbent, S-NRI displayed faster electrochemical extraction kinetics properties and higher extraction efficiency and capacity for uranium. In a more complex seawater electrolyte containing uranyl ion concentration ranging from 1 to 20 ppm, the removal efficiency could reach almost ∼100% after EUE for 24 h. At a higher 50 ppm uranium acyl ion concentration in a seawater electrolyte, S-NRI exhibited higher extraction capacity (755.03 mg/g), which is better than 528.53 mg/g of NRI at a cell voltage of -0.1 V. Outstanding EUE property could be attributed to the fact that sulfate species (M-SO42-) on the S-NRI surface not only enhanced selective adsorption of uranyl ions but also strengthened the Fe(II)/Fe(III) redox cycle, which accelerated electron transfer between Fe(II) and U(VI), promoted the regeneration of Fe(II) active sites, and finally enhanced the EUE property.

Synthesis of sp2 Carbon-Conjugated Covalent Organic Framework Thin-Films via Copper-Surface-Mediated Knoevenagel Polycondensation

sp2 carbon-conjugated covalent organic framework (sp2 c-COF) featured with high π-conjugation, high chemical stabilities, and designable chemical structures, are thus promising for applications including adsorption and separation, optoelectronic devices, and catalysis. For the most of these applications, large-area and continuous films are required. However, due to the needs of harsh conditions in the formation of CC bonds, classical interfacial methodologies are challenged in the synthesis of sp2 c-COFs films. Herein, a novel and robust interfacial method namely copper-surface-mediated Knoevenagel polycondensation (Cu-SMKP), is shown for scalable synthesis of sp2 c-COF films on various Cu substrates. Using this approach, large-area and continuous sp2 c-COF films could be prepared on various complicated Cu surfaces with thickness from tens to hundreds of nanometers. The resultant sp2 c-COF films on Cu substrate could be used directly as functional electrode for extraction of uranium from spiked seawater, which gives an exceptionally uptake capacity of 2475 mg g-1 . These results delineate significant synthetic advances in sp2 c-COF films and implemented them as functional electrodes for uranyl capture.

Large-Scale Synthesis of Covalent Organic Frameworks: Challenges and Opportunities

Connecting organic building blocks by covalent bonds to design porous crystalline networks has led to covalent organic frameworks (COFs), consequently transferring the flexibility of dynamic linkages from discrete architectures to extended structures. By virtue of the library of organic building blocks and the diversity of dynamic linkages and topologies, COFs have emerged as a novel field of organic materials that propose a platform for tailor-made complex structural design. Progress over the past two decades in the design, synthesis, and functional exploration of COFs in diverse applications successively established these frameworks in materials chemistry. The large-scale synthesis of COFs with uniform structures and properties is of profound importance for commercialization and industrial applications; however, this is in its infancy at present. An innovative designing and synthetic approaches have paved novel ways to address future hurdles. This review article highlights the fundamental of COFs, including designing principles, coupling reactions, topologies, structural diversity, synthetic strategies, characterization, growth mechanism, and activation aspects of COFs. Finally, the major challenges and future trends for large-scale COF fabrication are outlined.

Advanced Photocatalytic Uranium Extraction Strategies: Progress, Challenges, and Prospects

Nuclear energy with low carbon emission and high-energy density is considered as one of the most promising future energy sources for human beings. However, the use of nuclear energy will inevitably lead to the discharge of nuclear waste and the consumption of uranium resources. Therefore, the development of simple, efficient, and economical uranium extraction methods is of great significance for the sustainable development of nuclear energy and the restoration of the ecological environment. Photocatalytic U(VI) extraction technology as a simple, highly efficient, and low-cost strategy, received increasing attention from researchers. In this review, the development background of photocatalytic U(VI) extraction and several photocatalytic U(VI) reduction mechanisms are briefly described and the identification methods of uranium species after photocatalytic reduction are addressed. Subsequently, the modification strategies of several catalysts used for U(VI) extraction are summarized and the advantages and disadvantages of photocatalytic U(VI) extraction are compared. Additionally, the research progress of photocatalytic technology for U(VI) extraction in actual uranium-containing wastewater and seawater are evaluated. Finally, the current challenges and the developments of photocatalytic U(VI) extraction technology in the future are prospected.

A cascade electro-dehydration process for simultaneous extraction and enrichment of uranium from simulated seawater

Uranium extraction from seawater has become a crucial issue that has raised tremendous attention. The transport of water molecules along with salt ions through an ion-exchange membrane is a common phenomenon for typical electro-membrane processes such as selective electrodialysis (SED). In this study, a cascade electro-dehydration process was proposed for the simultaneous extraction and enrichment of uranium from simulated seawater by taking advantage of water transport through ion-exchange membranes and the high permselectivity of membranes for monovalent ions against uranate ions. The results indicated that the electro-dehydration effect in SED allowed 1.8 times the concentration of uranium with a loose structure CJMC-5 cation-exchange membrane at a current density of 4 mA/cm². Thereafter, a cascade electro-dehydration by a combination of SED with conventional electrodialysis (CED) enabled approximately 7.5 times uranium concentration with the extraction yield rate reaching over 80% and simultaneously desalting the majority of salts. Overall, a cascade electro-dehydration is a viable approach, creating a novel route for highly effective uranium extraction and enrichment from seawater.