The effects of dentine pretreatment on the adhesion of root-canal sealers

Physicochemical properties and biological interaction of calcium silicate-based sealers - in vivo model

OBJECTIVES

To investigate volumetric changes, in vivo biocompatibility, and systemic migration from eight commercial endodontic sealer materials in paste/paste, powder/liquid, and pre-mixed forms.

MATERIALS AND METHODS

The sealers AH Plus Bioceramic, AH Plus Jet, BioRoot RCS, MTApex, Bio-C Sealer, Bio-C Sealer Ion+, EndoSequence BC Sealer and NeoSEALER Flo were studied. After characterisation by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Raman spectroscopy and X-ray diffractometry (XRD), tubes were implanted in Wistar rats' alveolar bone and subcutaneous tissues. Micro-CT evaluated volumetric changes pre/post 30 days of implantation. Histological and immunohistochemistry analyses assessed biocompatibility. Kidney samples underwent spectrometry (ICP-MS) for tantalum, tungsten and zirconium. Statistical analysis determined normality and significance (udp < 0.05).

RESULTS

Characterisation revealed calcium, silicon, and radiopacifiers in the materials. Volumetric changes showed greater alteration in subcutaneous tissues than alveolar bone; BioRoot RCS and MTApex (powder/liquid) were most stable. Histological analysis indicated intense inflammation for AH Plus Jet, moderate for others; IL-10 was marked positively for all materials. AH Plus Jet had an 18-fold higher tungsten and a 37-fold higher zirconium mass fraction in kidneys versus controls, while tantalum showed lower accumulation patterns.

CONCLUSION

Root canal filling materials' responses varied by implantation site and form, demonstrating acceptable biocompatibility. Tantalum and zirconium oxide radiopacifiers appear systemically safe; tungsten-based radiopacifiers are unsuitable due to metal accumulation risks.

CLINICAL RELEVANCE

This study highlights the need for further in vivo studies on endodontic sealers' chemical, biological, and physical behaviors and their systemic migration.

Clinical utility index for root canal sealers

BACKGROUND

Effective endodontic treatment requires the use of a root canal sealer with optimal properties to ensure a hermetic seal, prevent reinfection, and promote healing. Despite the availability of various sealers, a standardized evaluation system still needs to be improved.

OBJECTIVES

To develop a Clinical Utility Index (CUI) that systematically evaluates and ranks root canal sealers based on their sealing ability, antimicrobial efficacy, flow rate, and solubility.

METHODS

The CUI was developed through a structured process involving expert identification, panel discussions, and the establishment of scoring criteria. Five sealers were evaluated (Sealers A, B, C, D, and E). Mean values for the core properties were calculated, and sealers were ranked accordingly. The total CUI for each sealer was computed based on the assigned scores for each property.

RESULTS

Sealer B achieved the highest CUI at 95%, demonstrating superior performance across all core properties. Sealer C followed with a CUI of 80%, while Sealer A ranked third with 60%. Sealers D and E showed the lowest performance, with CUIs of 30% and 35%, respectively, highlighting deficiencies in multiple properties.

DISCUSSION

The CUI provides a comprehensive evaluation framework for root canal sealers, facilitating informed decision-making by practitioners. Sealer B's high CUI underscores the importance of balancing sealing ability, antimicrobial effect, flow rate, and solubility. The results align with existing literature emphasizing the critical role of these properties in endodontic success.

CONCLUSION

The CUI offers a robust and balanced method for evaluating root canal sealers, aiding in selecting the most suitable sealer based on empirical data. Future research should refine the index and validate its applicability in diverse clinical scenarios to enhance endodontic treatment outcomes.

A Comparative Evaluation of Push-Out Bond Strength of Six Different Root Canal Sealers: An In-Vitro Study

BACKGROUND

Adhesiveness with radicular dentin is absent with gutta-percha, leading to microleakage and hence re-infection. Root canal sealer helps to achieve an adhesive interface between gutta-percha and root dentin thereby resisting the displacement forces during the functioning of teeth which is evaluated by the push-out test. The aim of this study is to compare the push-out bond strength and to assess the relative bond failure between dentin-sealer, sealer-main cone of (1) epoxy resin, (2) silicon, (3) mineral trioxide aggregate (MTA), (4) calcium hydroxide, (5) bioceramic, (6) zinc oxide eugenol containing root canal sealers.

METHODOLOGY

Sixty human permanent lower premolars with one root were collected, disinfected, and decoronated at cemento-enamel junction. Instrumentation was done with a K3 40,0.06 Ni-Ti rotary file and obturated using the main cone and sealer. Based on the sealer utilized, six groups were created: Group 1: AH-Plus, Group 2: RoekoSeal, Group 3: MTA Fillapex, Group 4: Apexit, Group 5: Smart Paste Bio, and Group 6: Procosol. One slice each was obtained from the coronal, middle, and apicalsections of all the obturated canals. Push-out bond strength and failure modes were studied. Statistics involved analysis of variance (ANOVA) followed by the post hoc Tukey test.

RESULTS

All three sections exhibited the highest strength for Smart Paste Bio sealer and the least was for RoekoSeal. With all the sealers, the apical section had the highest strength followed by the middle and coronal.

CONCLUSION

The smart seal system was superior to all other sealers and displayed a good bond to dentin.

Biocompatibility analysis in subcutaneous tissue and physico-chemical analysis of pre-mixed calcium silicate–based sealers

OBJECTIVES

To evaluate the biocompatibility, physical and chemical properties of three pre-mixed calcium silicate-based sealers and an epoxy resin-based material were assessed. Pre-mixed sealers supposedly obtain water from the root canal moist to hydrate and set.

MATERIALS AND METHODS

Polyethylene tubes were filled with the materials Bio-C Sealer Ion+, Bio-C Sealer, EndoSequence BC Sealer and AH Plus Jet, or left empty and surgically implanted in the subcutaneous tissue of Wistar rats. The animals were euthanised and the tubes and tissue were removed for histological analysis and scanning electron microscopy (SEM) coupled with energy-dispersive spectrometry (EDS). Materials' surface chemical characterisation was assessed using Raman spectroscopy and SEM/EDS. Flow, setting time (in two conditions), solubility, radiopacity and pH were also analysed. ANOVA and Bonferroni correction were performed for comparisons (P < 0.05).

RESULTS

Inflammatory response observed in the tissues subsided from 7 to 30 days. Tungsten migration could be detected in the surrounding tissue following AH Plus Jet implantation. All calcium silicate-based sealers exhibited zirconium oxide (radiopacifier) and tricalcium silicate peaks before and after implantation. All materials exhibited flow values above 17 mm. An approximately tenfold difference was observed between the plaster- and metal-mould setting times of the calcium silicate cements indicating its sensitivity to moist variations and solubility above 8% was also observed for these materials.

CONCLUSIONS

Pre-mixed materials exhibited variable setting time and solubility with a decreasing inflammatory response.

CLINICAL RELEVANCE

The variable moist-dependant setting time with high solubility poses a concern for the clinical use of these pre-mixed sealers.

Push-Out Bond Strength of EndoSeal Mineral Trioxide Aggregate and AH Plus Sealers after Using Three Different Irrigation Protocols

OBJECTIVE

 The current study was designed to assess the bonding strength of EndoSeal MTA and AH Plus sealers after using three irrigation protocols as follows: (1) 17% Ethylenediamine tetraacetic acid, (2) 7% maleic acid, and (3) 37% phosphoric acid.

MATERIALS AND METHODS

 Push-out bond strength was evaluated for 60 middle root slices of 1-mm thickness each. They were horizontally cut from freshly extracted single-rooted human teeth. A hole in the root canal was made using a carbide round bur of 1.1 mm in diameter in a middle third root slice. Specimens were dipped in 2.5% NaOCl, and then they were grouped into three groups; G1: 17% EDTA, G2: 7% maleic acid, and G3: 37% phosphoric acid as a final irrigant for 3 minutes. Each group was subdivided into two subgroups, according to the type of sealer, either EndoSeal MTA or AH Plus.

STATISTICAL ANALYSIS

 After the full set of the sealer, the bond strength was evaluated with the push-out test by applying a force to each slice using a plunger with a 1-mm diameter. The one-way Tukey's post hoc test, analysis of variance (ANOVA) test, and Student's t-test were utilized to gather data and statistically evaluate it.

RESULTS

 The irrigation protocol used exhibited significant influence on the bond strength of EndoSeal MTA and AH Plus sealers. AH Plus sealer subgroups showed the highest bond strength with 7% maleic acid, followed by 37% phosphoric acid, and 17% EDTA. While in the EndoSeal MTA sealer subgroups, the highest bond strength was shown with the 17% EDTA followed by 7% maleic acid and 37% phosphoric acid, respectively.

CONCLUSION

 The present study revealed that the type of the final irrigant significantly impacts the bond strength of the sealer used. The AH Plus sealer bond strength was improved by using the 7% maleic acid as a final irrigant. In contrast, the EndoSeal MTA sealer showed the best results with the 17% EDTA as a final irrigant.

Can Type of Instrumentation and Activation of the Final Irrigant Improve the Obturation Quality in Oval Root Canals? A Push-Out Bond Strength Study

Simple Summary

The complete instrumentation of oval root canals remains practically unattainable. The majority of studies show that shaping oval, flat, and irregularly shaped canals is challenging, with more than half of the root canal area remaining unaltered. Furthermore, both rotary and reciprocating files compact hard tissue debris into the isthmus areas and buccal and/or lingual recesses of oval canals, impairing debridement and filling. In addition, one of the most essential variables in assessing the success of endodontic therapy is the adhesion of root canal filling material to dentin.

Abstract

To appraise the outcome of file systems and activation of the final irrigant on the push-out bond strength of root fillings in oval canals. Single-rooted mandibular premolars (n = 180) with oval canals were divided into three groups (n = 60) for instrumentation: ProTaper Next (PTN), WaveOne (WO), and Self-adjusting File (SAF). The specimens were further divided into subgroups (n = 20) and subjected to final irrigation with activation by EndoActivator or passive ultrasonic irrigation or without activation. Then, the specimens were again subdivided (n = 10) and obturated with gutta-percha and AH Plus (GP-AH) or C-Point with EndoSequence bioceramic sealer (C-EBC). One-millimeter-thick horizontal slices were cut from the apical third of the root, 5 mm from the apex, and subjected to push-out bond strength (BS) testing. Specimens for which SAF was used exhibited higher BS values than those for which PTN or WO was used (p < 0.05). Activation of the final irrigation did not affect the BS of the root fillings. Root fillings made of C-EBC presented a higher BS than those made of GP-AH (p < 0.05). Adhesive failure was more common with specimens instrumented using PTN and WO. Root canals instrumented with SAF, showed the highest bond strength values for both root filling materials. The C-EBC produced significantly higher bond strength values than those of the GP-AH.

Effect of Sodium Hypochlorite Concentration in Continuous Chelation on Dislodgement Resistance of an Epoxy Resin and Hydraulic Calcium Silicate Sealer

The conditioning of the root canal wall during chemo-mechanical root canal treatment differentially affects the adhesion of root canal sealers. This investigation evaluated the impact of sodium hypochlorite (NaOCl) concentration as used in a root canal irrigation concept called continuous chelation, with 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) contained in the NaOCl solution that is applied. Fourier-transform infrared spectra of the dentinal wall were gathered. The consequential effects on push-out bond strength of an epoxy resin (AH Plus) versus a hydraulic CaSi sealer (BioRoot RCS) were assessed. Single-rooted extracted human teeth were used and irrigated with pure NaOCl at a concentration of 0% (physiological saline), 2.5%, or 5.25%. Dual Rinse HEDP (9%) was added to the solutions, or not added for further control. Pure NaOCl solutions caused a decrease in the amide III: phosphate ratios, which was counter-acted by the addition of HEDP. It was observed that the adhesion of the epoxy resin sealer under investigation was negatively affected by this NaOCl deproteinization of the canal wall in a dose-dependent manner, while the opposite was observed with the CaSi sealer. HEDP when used in conjunction with NaOCl was beneficial for the adhesion of both sealers.

The effects of final irrigants on the push-out bond strength of two calcium silicate-based root canal sealers: an in vitro study

Purpose:

The purpose of the present study was to investigate the effect of the different irrigant combinations used in final irrigation on the push-out bond strength of root canal sealers that have different compositions.

Materials and methods:

In total 60 dentinal slices in 1 mm thickness were collected from 15 extracted mandibular premolar teeth; 4 slices from each tooth. 3 canal-like artificial cavities were opened on each dentinal slice. Samples were divided into 4 experimental groups, each of which consisted of 15 samples. In group 1, samples were immersed in 5.25% NaOCl and 17% EDTA solutions respectively; in group 2, immersed in 5.25% NaOCl and 2% CHX solutions respectively; in group 3, immersed in 5.25% NaOCl, 17% EDTA and 2% CHX solutions respectively; and in group 4 immersed in distilled water. After drying with absorbent papers, each cavity in dentinal slice sample was filled with different sealer (Endoseal MTA, Tech Biosealer Endo or AH Plus). Two days later, the push-out bond examination was performed.

Results:

AH Plus showed higher push-out bond strength value in two combinations (group 2 and 3) in which final irrigants contained CHX (p<0.001). Dentinal push-out bond strengths of root canal sealers from Endoseal MTA and Tech BioSealer Endo were not affected by final irrigant (p=0.965).

Conclusion:

Using CHX after NaOCl in final irrigant increases push-out strength of epoxy resinbased sealer but, did not create any difference in dentinal push-out bond strength of calcium silicate-based sealers.

Evaluation of smear layer removal of radicular Dentin in comparison with different irrigation devices: An in vitro study

Aim:

The aim of this study was to evaluate the efficacy of smear layer removal from the root canals using 2 ml of 5.25% sodium hypochlorite passive ultrasonic irrigation, EndoVac, and diode laser during endodontic therapy.

Materials and Methods:

Forty single-rooted human teeth were selected. Access cavity preparation was done. Working length was determined. Instrumentation was initiated with ISO hand files number 15 k file, followed by ProTaper rotary files size F3. Two milliliters of 5.25% NaOCl was used as an irrigant after every instrumentation, with a final flush of 17% EDTA, followed by a rinse with 3 ml of distilled water. Teeth samples were divided into four groups – Group I (n = 10) conventional irrigation with 5.25% NaOCl, 17% EDTA for 1 min, Group II (n = 10) instrumented and irrigated with ultrasonic activation for 1 min, Group III (n = 10) instrumented and irrigated with EndoVac for 1 min, Group IV (n = 10) (analyzed with irradiation of 2 W continuous wave of 910 nm diode laser). Teeth samples were then sectioned longitudinally. Scanning electron microscope examination of canals was done for evaluating smear layer at different levels. Statistical data analysis was done by one-way ANOVA test to evaluate the smear layer score at a significance level of P ≤ 0.05.

Results:

Group III and Group IV have a minimal amount of smear layer at the apical third when compared to Group I and Group II which was statistically significant with a P < 0.05.

Conclusion:

Diode laser and EndoVac performed better in removing the smear layer when compared with 2 ml of 5.25% sodium hypochlorite and ultrasonic irrigation.

The presence of smear layer affects the antimicrobial action of root canal sealers

AIM

To assess the chemical and microstructural characteristics of dentine after the use of two irrigation protocols and correlate this with the antimicrobial properties of hydraulic calcium silicate cement (HCSC) sealers and changes to the dentine structure/chemistry after sealer placement.

METHODOLOGY

Two irrigation protocols - Protocol A using 2% NaOCl used 5 mL/5 min and Protocol B with 2% NaOCl (5 mL/5 min) followed by 17% EDTA (5 mL/3 min) - were used to prepare dentine. The chemical and microstructural changes following irrigation were assessed by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and Fourier transform infrared (FT-IR) spectroscopy (n = 5) on dentine obtained from the mid-root and coronal parts of extracted human teeth. Four sealers (AH Plus, BioRoot, MTA Fillapex, TotalFill) were characterized by SEM/EDS (n = 3). The ability of the sealers to eradicate intratubular Enterococcus faecalis biofilms was assessed by live/dead dye and confocal laser scanning microscopy to measure the percentage of living cells. The effect of combined irrigation and root filling on dentine was assessed by SEM and EDS analysis (n = 5). Statistical analysis was undertaken using one-way anova and a number of post hoc tests to detect intergroup differences. The F-test was used for comparison of variances in the microbiology testing.

RESULTS

The use of NaOCl alone left the smear layer intact, with traces of chlorine remaining on dentine. The use of BioRoot sealer restored the calcium levels of dentine which had been depleted by the irrigation with EDTA. BioRoot exhibited antimicrobial properties against intratubular bacteria even in the presence of smear layer (Protocol A). Smear layer removal improved the bactericidal effect of all sealers and Ca²⁺ leaching. The use of a chelating agent was important for the intratubular sealer penetration for AH Plus but not the other sealers.

CONCLUSION

The removal of smear layer was necessary for penetration of AH Plus into the dentinal tubules. BioRoot was a more effective sealer in reducing the bacterial load in the dentinal tubules than the other materials tested and the presence of smear layer did not affect its activity.

Effects of different irrigation protocols on dentin surfaces as revealed through quantitative 3D surface texture analysis

The combination of ethylenediaminetetraacetic acid (EDTA) and sodium hypochlorite (NaOCl) has been advocated as an effective irrigation methodology to remove organic and inorganic matter in root canal therapy. Yet, it was suggested that both solutions might lead to structural changes of the dentinal wall surface, depending on the order of application which might affect sealer mechanical retention. This study aims to evaluate the effect of different irrigating protocols on dentin surface roughness using quantitative 3D surface texture analysis. Data stems from 150 human root dentin sections, divided into five groups, each prepared according to one of the following protocols: Negative control; 17% EDTA; 17% EDTA followed by 5.25% NaOCl; 5.25% NaOCl; and 5.25% NaOCl followed by 17% EDTA. Each dentin sample was examined for its three-dimensional surface texture using a high-resolution confocal disc-scanning measuring system. EDTA 17% and the combined EDTA 17% with NaOCl 5.25% showed considerably higher roughness properties compared to the control and to NaOCl 5.25% alone. However, the irrigation sequence did not affect the dentin roughness properties. Therefore, mechanical retention is probably not dependent upon the selection of irrigation protocol sequence.

Secondary Root Canal Treatment with Reciproc Blue and K-File: Radiographic and ESEM-EDX Analysis of Dentin and Root Canal Filling Remnants

Secondary root canal treatment requires the complete removal of filling materials with different chemical-physical properties. A newly developed single-use NiTi instrument (Reciproc Blue, RB) may be more effective in root canal retreatment. The aim of the present study was to evaluate morphology and composition of remnants after retreatment with RB compared to traditional K-File technique, in canals obturated with Thermafil/AH Plus. Twenty-four single-rooted human teeth were shaped with NiTi obturated with AH-Plus/Thermafil and retreated using RB NiTi instruments or manual K-Files. Radiographs were taken to evaluate endodontic space and radiopacity of residual filling-material before/after procedures. After retreatment, samples were longitudinally split and observed by environmental scanning electron microscopy connected to energy dispersive X-Ray spectroscopy (ESEM-EDX) to analyze the debris/remnant position, microchemistry, and dentinal surface morphology. Time for retreatments was recorded and compared using one-way ANOVA (p-value = 0.05). Radiopaque filling residuals were found in both groups. RB system resulted statistically faster than manual K-File in retreatment procedure (p < 0.001). Root canal space radiographic appearance obtained after retreatment with RB was wider than K-File (p < 0.05). ESEM-EDX revealed 4 different morphological dentin area. Area-1: debris-free with typical Ca, P, and N composition of dentin and detected in 70% of the surface. Area-2: presence of deproteinized smear layer free from N and debris in 15% of the surface. Area-3: a thick packed smear layer N-free and with fine debris consisting of trace elements from sealer in 10% of the surface. Area-4: packed with debris and trace elements. No difference was observed between both instruments regarding root canal space appearance and ESEM-EDX analysis. Both systems were able to remove filling material but created a dentine morphology composed of packed debris and filling materials embedded into the smear layer. Dentin surface composition resulted in collagen depleted by irrigation procedures. The reciprocating system required less time to complete retreatment.

The Effect of Silver, Zinc Oxide, and Titanium Dioxide Nanoparticles Used as Final Irrigation Solutions on the Fracture Resistance of Root-Filled Teeth

Aim

This study was conducted to evaluate the effect of three nanoparticle solutions used as final root canal irrigants on the fracture resistance of endodontically treated roots.

Materials and Methods

Sixty intact single-rooted premolar teeth were used after removing the crowns below the cementum–enamel junction to standardize the length of the remaining roots to 13 mm. After instrumenting the roots using ProTaper Universal rotary instruments up to size F4, the roots were randomly divided into six groups (n=10) according to the final irrigating solutions: Group 1: normal saline; Group 2: 2% chlorhexidine (CHX); Group 3: 17% EDTA+2.5% NaOCl; Group 4: 17% EDTA+0.1% silver nanoparticle (SNP) solution; Group 5: 17% EDTA+0.1% titanium dioxide nanoparticle (TNP) solution; Group 6: 17% EDTA+0.1% zinc oxide nanoparticle (ZNP) solution. After filling the root canals with gutta-percha and AH Plus sealer, the fracture resistance (FR) values were measured. The data were subjected to the one-way analysis of variance and the Tamhane post hoc test (p=0.05).

Results

EDTA + NaOCl had the lowest FR value, followed by normal saline and CHX (p values < 0.05). No significant difference was found between the FR of roots irrigated with CHX and normal saline (p > 0.05). The application of nanoparticles (SNP, TNP, and ZNP) was associated with a significantly greater FR than that of other irrigation solutions (p values < 0.05).

Conclusion

The final irrigation of root canals with nanoparticles enhanced the fracture resistance of the endodontically treated roots. The lowest FR value was observed for NaOCl.

The effect of smear layer removal on E. faecalis leakage and bond strength of four resin-based root canal sealers

BACKGROUND

The aim of the study was to assess bacterial sealability and bonding ability of methacrylate-based Resilon (RS, SybronEndo), Endo Rez (ER, Ultradent Products Inc), and epoxy-based AH Plus (AH, Dentsply/DeTrey), MTA Fill Apex (MTAF, Angelus Soluções Odontológicas) root canal sealers, and the effect of the smear layer removal on the sealability.

METHODS

One hundred thirty root segments were instrumented up to apical size #60 and rinsed with 2.5% NaOCl. Half of the roots were rinsed with 5ml 17% EDTA to remove the smear layer. All the roots were filled with AH, ER, MTAF sealers and gutta-percha, or RS with Resilon cones. After storage at 37°C for 7 days the samples were mounted into bacterial leakage assay for 50 days. Another 100 roots were instrumented and rinsed as described above, split longitudinally, cut into the cervical, middle and apical parts. The sealers were injected through the plastic mould on the dentin surface. After 7 days of incubation at 37°C, bond strength was tested using a notched-edge test fixture (Crosshead, Ultradent Products Inc.) and a universal testing machine (Lloyd Instruments).

RESULTS

AH revealed the longest mean time for bacterial resistance by 29.4 and 36.8 days (with and without smear layer, respectively) followed by RS (15.1 and 24.7 days, respectively). The difference between materials was significant (p<0.001). Bond strength values ranged from 0.2± 0.1 to 3.5± 0.7 MPa and increased from the apical to the cervical third. In the apical third, AH showed the highest mean (SD) bond values 1.4 (0.4) MPa and 1.7 (0.6) MPa (with and without smear, respectively, followed by RS, 0.5 (0.1) MPa and 0.8 (0.1) MPa, respectively. The difference between materials was significant (p=0.001).

CONCLUSION

The effect of the smear layer removal on the sealability was material-dependent.

Evaluation of chemical and morphological changes in radicular dentin after different final surface treatments

The aim of this study was to evaluate the chemical and morphological effects of different lasers as a final surface treatment for endodontic therapy through energy dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM) respectively. Twenty-five maxillary canines were selected and instrumented with K3 system. Roots were randomly distributed into five groups (n = 5) according to the surface treatment: GI (distilled water), GII (NaOCl + EDTA), GIII (NaOCl + EDTA + 980 nm diode laser), GIV (NaOCl + EDTA+ 1,064 nm Nd:YAG laser), and GV (NaOCl + EDTA+ 2,780 nm Er, Cr:YSGG laser). Lasers were applied for 20 s and samples were bisected, exposing the treated surface and then subjected to elements quantification by EDS and morphological evaluation by scanning electron microscope (SEM). EDS data were submitted to ANOVA-two way, and SEM scores were submitted to two-way Kruskal-Wallis and Dunn's tests. The EDS analysis showed no difference for the chemical elements and Ca/P ratio between groups (p > .05). Statistical analysis showed more intense results for GV and less intense results for GI (p < .05). The GIII showed an amorphous organic matrix surface, while GV provided greater removal of intertubular dentin forming craters, and GIV promoted dentin fusion. The EDS method used in this study was not able to verify any chemical changes in root canal dentin; Nd:YAG, Er, Cr:YSGG, and 980 nm diode laser were capable of modifying the dentin morphology, correlating characteristics features for each one, which are essential clinical knowledge to establish the correct indication for each case. RESEARCH HIGHLIGHTS: EDS was not able to verify any chemical changes in root canal dentin after 980 nm diode, Nd:YAG and Er;Cr:YSGG laser treatments Nd:YAG, Er, Cr:YSGG, and 980 nm diode laser modified dentin morphology, correlating characteristics features for each one.

Influence of the EndoActivator Irrigation System on Dentinal Tubule Penetration of a Novel Tricalcium Silicate-Based Sealer

This study compared the effects of a conventional endodontic needle with an agitation system on a novel tricalcium silicate-based sealer (NTS) in terms of dentinal tubule penetration and interfacial adaptation to a root canal. Fifty single-rooted, recently-extracted human maxillary central incisors were randomly distributed into two homogeneous groups characterized by two different final cleansing systems: Conventional endodontic needle, or EndoActivator^®. After instrumentation, all the teeth were filled with the gutta-percha single cone technique in conjunction with the novel tricalcium silicate-based sealer. Teeth were horizontally sectioned at 1 and 5 mm from the apex and were observed under a confocal laser scanning microscope (CLSM) at five magnifications. The maximum, mean, and the circumferential percentage of the sealer penetration inside the tubules were measured. Moreover, the gap width was evaluated using Image J software (National Institutes of Health, Bethesda, MD). EndoActivator^® did not result in a significantly higher circumferential percentage of sealer penetration than conventional irrigation (p > 0.05). However, the gap width was significantly lower with EndoActivator^®, compared to conventional needles at both 1 mm (p = 0.035) and 5 mm (p = 0.038). The EndoActivator^® irrigation system did not significantly improve the NTS penetration, as compared to the conventional endodontic needle irrigation. Activation of the irrigation reduced the gap width significantly.

Effect of Low-surface Tension EDTA Solutions on the Bond Strength of Resin-based Sealer to Young and Old Root Canal Dentin

INTRODUCTION

The purpose of this study was to evaluate the effect of low-surface tension EDTA solutions on the push-out bond strength of resin-based sealer to young and old root canal dentin.

METHODS

Root canals from 64 (n = 32 age <30 years old and n = 32 >60 years old) extracted, decoronized, single-rooted human teeth were prepared with ProTaper rotary instruments (Dentsply Maillefer, Ballaigues, Switzerland) up to size F4 using 3 mL 2.5% sodium hypochlorite (NaOCl) between each file. Each group was divided into 4 subgroups as follows: 3 mL EDTA, REDTA (17% EDTA + 0.84 g cetyltrimethylammonium bromide; Sigma-Aldrich, St Louis, MO), EDTA-T (17% EDTA + 1.25% sodium lauryl ether sulfate, Sigma-Aldrich), and saline as the control (n = 8). The final irrigation was completed with 3 mL saline after 3 mL NaOCl in the experimental groups and 3 mL saline in the control group. After root canal filling with gutta-percha (GP) cones/AH Plus sealer (Dentsply, Petropolis, RJ, Brazil), samples were stored at 37°C and 100% humidity for 2 weeks. One-millimeter-thick horizontal sections from the coronal and midthirds of each root were sliced, and push-out bond strength values were measured using a universal testing machine. Data were analyzed using 2-way analysis of variance followed by the Bonferroni test (P < .05).

RESULTS

EDTA-T, REDTA, and EDTA significantly increased the bond strength values of GP/AH Plus to the root canal dentin compared with saline in both young and old groups (P < .05). EDTA-T treatment provided higher bond strength values in young dentin compared with EDTA and EDTA-T-treated old dentin (P < .05).

CONCLUSIONS

The bond strength values of GP/AH Plus could be altered depending on age and the type of EDTA compounds.

Effect of Intra-Canal Calcium Hydroxide Remnants on the Push-Out Bond Strength of Two Endodontic Sealers

INTRODUCTION

The aim of this study was to evaluate the effect of intra-canal calcium hydroxide (CH) remnants after ultrasonic irrigation and hand file removal on the push out bond strength of AH-26 and EndoSequence Bioceramic sealer (BC Sealer).

METHODS AND MATERIALS

A total of 102 single-rooted extracted human teeth were used in this study. After root canal preparation up to 35/0.04 Mtwo rotary file, all the specimens received CH dressing except for 34 specimens in the control group. After 1 week, the specimens with CH were divided into 2 groups (n=34) based on the CH removal technique; i.e. either with ultrasonic or with #35 hand file. Then specimens were divided into two subgroups according to the sealer used for root canal obturation: AH-26 or BC Sealer. After 7 days, 1 mm-thick disks were prepared from the middle portion of the specimens. The push out bond strength and failure mode were evaluated. Data were analyzed by the two-way ANOVA and Tukey's post hoc tests.

RESULTS

The push out bond strength of both sealers was lower in specimens receiving CH. These values were significantly higher when CH was removed by ultrasonic (P<0.05). The dominant mode of failure in all subgroups was of mixed type except for the BC Sealer specimens undergoing CH removal with hand file which dominantly exhibited adhesive mode of failure.

CONCLUSION

CH remnants had a negative effect on the push out bond strength of AH-26 and BC Sealer. Ultrasonic irrigation was more effective in removing CH.

The Effect of Canal Dryness on Bond Strength of Bioceramic and Epoxy-resin Sealers after Irrigation with Sodium Hypochlorite or Chlorhexidine

Introduction:

The aim of this in vitro study was to evaluate the effect of canal dryness on the push-out bond strength of two resin sealers (AH-Plus and Adseal) and a bioceramic sealer (Endosequence BC sealer) after canal irrigation with sodium hypochlorite (NaOCl) and chlorhexidine (CHX).

Methods and Materials:

A total of 18 extracted human premolars were used. Canals were prepared and were divided to two groups based on irrigation solution (either NaOCl or CHX). The samples were again divided based on pre-obturation canal condition (wet, half-wet and dry). The samples were sub-divided into 3 groups based on the sealer type; the teeth were obturated with gutta-percha and test sealers (Adseal, AH-Plus or BC sealer). A total number of 18 groups were available to be cut into dentine disks (12 disks in each group). The type of bond failure was also assessed in each group. Data were analyzed using the 3-way ANOVA, post hoc Tukey’s tests, t-test and the Fisher’s exact test. The level of significance was set at 0.05.

Results:

The bond strength of Adseal was not affected by the canal condition or irrigation with either NaOCl or CHX. Although the bond strength of AH-Plus was not affected by the irrigant type, the highest bond strength was seen in dry canals. For Endosequence BC sealer, the canal conditions did not affect the bond strength; however, CHX reduced the bond strength.

Conclusion:

Bond strength of resin sealers was not affected by irrigation solution; however, canal moisture negatively affected the bond strength of AH-Plus. CHX reduced the bond strength of BC sealer.

Effectiveness of laser-assisted irrigation and passive ultrasonic irrigation techniques on smear layer removal in middle and apical thirds

The purpose of this study was to investigate the evaluation of laser-assisted irrigation (LAI) on the removal of the smear layer as compared to passive ultrasonic irrigation (PUI). Forty-eight single-rooted, upper-central incisor teeth were selected and prepared with ProTaper rotary instruments up to size #40 (F4) at the working lengths. Specimens were divided into four groups, as follows: (a) PUI with 5 mL of 2.5% NaOCl for 60 s; (b) PUI with 2.5 mL of 17% EDTA and 2.5 mL of 2.5% NaOCl each for 30 s; (c) LAI with 5 mL of 2.5% NaOCl for 60 s; and (d) LAI with 2.5 mL of 17% EDTA and 2.5 mL of 2.5% NaOCl each for 30 s. In the PUI groups, the ultrasonically activated file was inserted 1 mm short of the working length, but in the LAI groups, the fiber tip was applied into the pulp chamber. LAI in the pulp chamber with the combination of 17% EDTA and 2.5% NaOCl removed more of the smear layer than the other groups (p < 0.018). LAI in the pulp chamber with the combination of 2.5% NaOCl and 17% EDTA better removed the smear layer than LAI applied similarly but without EDTA or PUI with the same NaOCl and EDTA combinations using an ultrasonically activated file inserted 1 mm short of the working length.

Comparison of the effect of MTAD and conventional irrigation agents on apical leakage and push-out bond strength of root canal filling

The aim of this study was to evaluate the effect of MTAD (a mixture of tetracycline isomer, an acid, and a detergent) and conventional irrigation agents on the apical leakage and push-out bond strength of root canal filling and to correlate the apical leakage and push-out bond strength. Root canals of 120 maxillary central incisors were prepared with a ProTaper file up to F3 and distributed to six groups. Saline, 1% NaOCl, 17% EDTA, 17% EDTA/1% NaOCl, and 2% chlorhexidine (CHX) solutions were used between each file change, and 5 mL of the same irrigating solution was used for the final flush. In the MTAD group, the root canals were irrigated with 1.3% NaOCl between each file and 5 mL of MTAD for the final flush. All the root canals were filled with AH Plus sealer and gutta-percha cones. Apical leakage was evaluated using a fluid transport system. After the apical leakage test, each tooth was prepared for the push-out assessment. The statistical analysis revealed that the irrigation solutions had no effect on the apical leakage of the root canal fillings (p = 0.258). The root fillings of the groups irrigated with MTAD showed significantly lower push-out bond strength values than the other groups (p < 0.001). These commonly used irrigating solutions did not affect the apical leakage of the root canal sealer. MTAD reduced the bond strength of the root canal sealer to the root canal dentin.

Dentin wettability enhancement for three irrigating solutions and their effect on push out bond strength of gutta percha / AH Plus

Background

The aim of this study was to investigate the effect of wettability enhancement for 17% EDTA, 2.5% sodium hypochlorite and 7% maleic acid solutions on push out bond strength of gutta percha /AH Plus to root dentin.

Material and Methods

One hundred and eight extracted single rooted human lower premolars were instrumented up to Protaper Universal F5 then irrigated with 3ml of 2.5% NaOCl after each file. Irrigants were prepared and a pilot study for determination of Tween 80 concentration yielding the lowest surface tension value in every solution was conducted. Samples were randomly divided into a control group and two experimental groups (17% EDTA and 7% Maleate), further split into eight subgroups (n=12), according to Tween 80 implementation sequence. Roots were obturated using gutta percha and AH plus by lateral condensation. Bond strength was measured by push out test. Mode of failure was then evaluated quantitatively by stereomicroscopy. Data were statistically analyzed using one way ANOVA followed by Tukey-Kramer for multiple comparisons.

Results

Control group showed the lowest values. Maleic acid subgroups showed significantly higher overall values than EDTA subgroups (P<0.05). Protocols implementing surfactant containing NaOCl showed significantly lower values than plain counterparts. Failure pattern was predominantly cohesive for plain regimens and the ones implementing Tween 80 in maleic acid solutions with plain NaOCl.

Conclusions

Tween 80 addition to demineralizing irrigants increased the bond strength values. Surfactant containing NaOCl solutions yielded lower bond strength than plain ones.

Key words:Wettability enhancement for three irrigants vs. corresponding gutta percha/AH Plus bonding.

Effect of advanced irrigation protocols on self-expanding Smart-Seal obturation system: A scanning electron microscopic push-out bond strength study

Introduction:

The aim of this study was to evaluate the effect of different final irrigation activation techniques affect the bond strength of self-expanding Smart-Seal obturation at the different thirds of root canal space.

Materials and Methods:

One hundred single-rooted human teeth were prepared using the Pro-Taper system to size F3, and a final irrigation regimen using 3% sodium hypochlorite and 17% EDTA was performed. The specimens were randomly divided into five groups (n = 20) according to the final irrigation activation technique used as follows: No activation (control), manual dynamic activation (MDA), CanalBrush activation, ultrasonic activation (UA) and EndoActivator. Five specimens from each group were subjected to scanning electron microscopic observation for assessment of the smear layer removal after the final irrigation procedures. All remaining roots were then obturated with Smart-Seal obturation system. A push-out test was used to measure the bond strength between the root canal dentin and Smart-Seal paste. The data obtained from the push-out test were analyzed using two-way analysis of variance and Tukey post-hoc tests.

Conclusions:

It was observed that UA improved the bond strength of Smart-Seal obturation in the coronal and middle third and MDA/EndoActivator in the apical third of the root canal space.

Sealer penetration into dentinal tubules in the presence or absence of smear layer: a confocal laser scanning microscopic study

INTRODUCTION

The aim of this study was to test the dentinal tubule penetration of AH26 (Dentsply DeTrey, Konstanz, Germany) and MTA Fillapex (Angelus, Londrina, PR, Brazil) in instrumented root canals obturated by using cold lateral compaction or warm vertical compaction techniques in either the presence or absence of the smear layer.

METHODS

Forty-five extracted single-rooted human mandibular premolar teeth were used. The crowns were removed, and the root canals were instrumented by using the Self-Adjusting File (ReDent-Nova, Ra'anana, Israel) with continuous sodium hypochlorite (2.6%) irrigation. Final irrigation was either with 5% EDTA or with sodium hypochlorite. The canals were dried and obturated by using rhodamine B-labeled AH26 or MTA Fillapex in combination with the cold lateral compaction or the warm vertical compaction technique. After setting, the roots were sectioned horizontally at 4-, 8-, and 12-mm distances from the apical tip. On each section, sealer penetration in the dentinal tubules was measured by using confocal laser scanning microscopy.

RESULTS

Regardless of the usage of EDTA, MTA Fillapex, compared with AH26, was associated with greater sealer penetration when used with the cold lateral compaction technique, and, conversely, AH26, compared with MTA Fillapex, was associated with greater sealer penetration when used with the warm vertical compaction technique (P < .05). Removal of the smear layer increased the penetration depth of MTA Fillapex used with the cold lateral compaction technique (P < .05); however, it had no significant effect on the penetration depth of AH26.

CONCLUSIONS

Greater sealer penetration could be achieved with either the MTA Fillapex-cold lateral compaction combination or with the AH26-warm vertical compaction combination. Smear layer removal was critical for the penetration of MTA Fillapex; however, the same did not hold for AH26.

WITHDRAWN: Effect of post space conditioning and luting resin on the retentive strength of fiber-reinforced composite resin posts

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at http://www.elsevier.com/locate/withdrawalpolicy.

Etidronate from medicine to endodontics: effects of different irrigation regimes on root dentin roughness

An increase in dentin roughness, associated with surface composition, contributes to bacterial adherence in recontaminations. Surface roughness is also important for micromechanical interlocking of dental materials to dentin, and understanding the characteristics of the surface is essential to obtain the adhesion of root canal sealers that have different physico-chemical characteristics.

OBJECTIVES

To evaluate the effects of sodium hypochlorite (NaOCl), ethylenediaminetetraacetic (EDTA), etidronic (HEBP), and citric acid (CA) associated with different irrigation regimens on root dentin roughness.

MATERIAL AND METHODS

Forty-five root halves of anterior teeth were used. The root parts were sectioned in thirds, embedded in acrylic resin and polished to a standard surface roughness. Initially, the samples of each third were randomly assigned into 3 groups and treated as follows: G1 - saline solution (control); G2 - 5% NaOCl+18% HEBP mixed in equal parts; and G3 - 2.5% NaOCl. After initial measuments, the G3 samples were distributed into subgroups G4, G5 and G6, which were subjected to 17% EDTA, 10% CA and 9% HEBP, respectively. Following the new measuments, these groups received a final flush with 2.5% NaOCl, producing G7, G8 and G9. The dentin surface roughness (Ra) was determined before and after treatments using a profilometer. The Wilcoxon test (α<0.05) was used to compare the values before and after treatments, and the Friedman test (α<0.05) to detect any differences among root thirds.

RESULTS

(i) NaOCl did not affect the surface roughness; (ii) there was a significant increase in roughness after the use of chelating agents (P<0.01); and (iii) only the G3 group showed a difference in surface roughness between apical third and other thirds of the teeth (P<0.0043).

CONCLUSION

Only the irrigation regimens that used chelating agents altered the roughness of root dentin.

Investigation of Coronal Leakage of Root Fillings after Smear Layer Removal with EDTA or Er,Cr:YSGG Laser through Capillary Flow Porometry

No studies have been performed evaluating the marginal seal of root fillings after direct exposure of root canal (RC) walls to Er,Cr:YSGG laser irradiation. Therefore, 75 root filled teeth (5 × 15–cold lateral condensation) were analyzed for through-and-through leakage (TTL) using capillary flow porometry (CFP). The cleaning protocol determined the experimental groups: (1) irrigation with NaOCl 2.5% and EDTA 17% or standard protocol (SP), (2) SP + Er,Cr:YSGG lasing (dried RC), (3) NaOCl 2.5% + Er,Cr:YSGG lasing (dried RC), (4) SP + Er,Cr:YSGG lasing (wet RC), and (5) NaOCl 2.5% + Er,Cr:YSGG lasing (wet RC). Groups 6 to 10 consisted of the same filled teeth with resected apices. Resection was performed after the first CFP measurement. CFP was used to assess minimum, mean flow, and maximum pore diameters after 48 h. Statistics were performed using nonparametric tests (P > 0.05). Additional three roots per group were submitted to SEM of the RC walls. TTL was observed in all groups without statistically significant differences between the different groups for minimum, mean, and maximum pore diameter (P > 0.05). In this study, the use of EDTA and/or Er,Cr:YSGG laser did not reduce through-and-through leakage in nonresected and resected roots.

The effect of Er,Cr:YSGG laser irradiation on the push-out bond strength of RealSeal self-etch sealer

OBJECTIVE

The aim of this study was to evaluate the effect of an erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser on the push-out bond strength of RealSeal Self-Etch (SE) sealer.

BACKGROUND DATA

Various methods are used for smear layer removal in endodontics, such as the application of Er,Cr:YSGG lasers. This laser system may influence the bond strength of resin-based sealers.

METHODS

Sixty single-rooted extracted teeth were selected. After root canal preparation, samples were divided into two experimental groups and one positive control group (n=20 per group). In group 1, the smear layer was removed by irrigation with ethylenediaminetetraacetic acid (EDTA) and sodium hypochlorite (NaOCl). In group 2, the smear layer was removed using a 2.78 μm Er,Cr:YSGG laser with radial firing tips (RFT3) (parameters: 1.5 W, 140 μs, 20 Hz, and 15% water to 15% air ratio), moving at 2 mm/sec in an apico-coronal direction. Group 3 served as a positive control group. Five specimens from each group were selected for scanning electron microscope (SEM) observation. The remaining 45 roots were obturated with RealSeal SE/Resilon and subjected to push-out tests. Data were analyzed using one way analysis of variance (ANOVA) and Tamhane's test.

RESULTS

The results showed no significant difference between push-out bond strength of root canal fillings in the EDTA+NaOCl group and the 1.5 W laser group (p>0.05). The positive control group showed the lowest push-out bond strength.

CONCLUSIONS

The results of the present study indicate that the application of an Er,Cr:YSGG laser with radial firing tips did not adversely affect the push-out bond strength of RealSeal SE sealer to dentin.