Analysis of the depth of penetration of an epoxy resin-based sealer following a final rinse of irrigants and use of activation systems: An in vitro study

Objective

The objective of the study was to compare and evaluate the depth of penetration of an epoxy resin-based sealer following a final rinse of 17% ethylenediaminetetraacetic acid (EDTA) and 18% 1-hydroxyethylidene 1, 1-diphosphonate (HEDP), with diode laser and passive ultrasonic activation (PUI): an in vitro confocal laser scanning microscopy study.

Materials and Methods

Fifty-two extracted human mandibular premolar teeth with single root and single canal were selected. They were disinfected in 0.1% thymol solution, cleaned of calculus and soft tissues, and stored in 0.1% thymol solution till use. All teeth were radiographed and selected as per the inclusion and exclusion criteria. The teeth were decoronated using a diamond disk under copious water spray to acquire a standardized root length of 14 mm. Working length was established by inserting a size 10-K file into each root canal until it is visible at the apical foramen and by subtracting 1 mm from the recorded length. Instrumentation of the root canal was done till master apical file size of F3 using ProTaper universal, rotary instruments. The canals were irrigated with 2 mL of 3% sodium hypochlorite between successive files. Teeth were randomly divided into four subgroups n = 12 according to the intervention. Passive ultrasonic irrigation and diode laser were used to activate the irrigants. Final irrigation was performed with distilled water. These specimens were examined using confocal laser scanning microscope (OLYMPUS FLUOVIEW FV 3000) for dentinal tubule penetration of the sealer. Two-way ANOVA test and Tukey's multiple post hoc test were used for statistical analysis.

Results

Highly significant difference was seen between the groups with EDTA and HEDP, with HEDP demonstrating the highest penetration. Among the activation techniques used in this study, PUI showed the highest penetration of the sealer. The least penetration was seen with diode laser activation and EDTA.

Conclusions

The irrigation activation techniques significantly influence the penetration of sealer into root dentinal tubules. When penetration of sealer with different irrigation techniques and irrigants was evaluated, significant greater level of sealer penetration was attained with PUI activation of HEDP.

Optical Measurement of the Stoichiometry of Thin-Film Compounds Synthetized From Multilayers: Example of Cu(In,Ga)Se2

The properties of centimeter-sized thin-film compound semiconductors depend upon the morphology and chemical composition of the multiple submicrometer-thick elemental and alloy precursor layers from which they are synthesized. The challenge is to characterize the individual precursor layers over these length scales during a multistep synthesis without altering or contaminating them. Conventional electron and X-ray-based morphological and compositional techniques are invasive, require preparation, and are thus incompatible with in-line synthesis processes. In a proof-of-concept study, we applied confocal laser scanning microscopy (CLSM) as a noninvasive optical imaging technique, which measures three-dimensional surface profiles with nanoscale resolution, to this challenge. Using an array of microdots containing Cu(In,Ga)Se2 semiconductor layers for solar cells as an example, we performed CLSM correlative studies to quantify morphological and layer thickness changes during four stages of a thin-film compound synthesis. Using simple assumptions, we measured the micrometer-scale spatially resolved chemical composition of stacked precursor layers to predict the final material phases formed and predict relative device performance. The high spatial resolution, coupled with the ability to measure sizeable areas without influencing the synthesis at high speed, makes CLSM an excellent prospect for research and quality control tool for thin films.

Assessment of the Penetration of an Endodontic Sealer into Dentinal Tubules with Three Different Compaction Techniques Using Confocal Laser Scanning Microscopy

Adequate root canal sealing is essential for the success of endodontic treatment. There are numerous techniques available; identifying simple and efficient techniques is important to provide good patient care. The purpose of the study was to compare the maximum penetration depth and the percentage of sealant penetration of an endodontic sealer into dentine tubules using cold lateral condensation, continuous wave, and hybrid techniques, and to contrast the effectiveness of two different tapered gutta-percha master cones (0.02 and 0.04). A sample of sixty single root teeth was used. Six experimental groups were formed from the three filling techniques and the two tapered master cones. Images were acquired using a confocal laser scanning microscope. In the apical root third, the penetration percentage was higher in the hybrid compared with the continuous wave technique. The results indicated a higher penetration depth of hybrid compared with cold lateral condensation in the middle and coronal thirds, and in the apical third, a higher penetration was identified in the hybrid group compared with the continuous wave group. No significant differences in penetration were found comparing 0.02 with 0.04 taper gutta-percha groups. The coronal cross-sections presented a higher penetration than the apical third sections. In conclusion, the hybrid technique a had higher maximum sealer penetration than the continuous wave in the apical third, and the coronal third hybrid and continuous wave had a higher penetration than cold lateral condensation.

Comparative evaluation of penetration of sealers in dentinal tubules using passive ultrasonic irrigation and Erbium: yttrium-aluminum-garnet laser - A confocal laser scanning microscope study

Context

Smear layer clearance and sealer penetration into dentinal tubules play a crucial role in root canal treatment. Hence, efficient irrigation is a crucial component of the root canal debridement. This in vitro study's objective was to assess the effectiveness of passive ultrasonic activation and Erbium: yttrium-aluminum-garnet (Er: YAG) laser-activated irrigation on irrigation solution penetration and sealer penetration into dentinal tubules.

Aims

The aim of this study was to evaluate and compare the dentinal tubule penetration of epoxy resin-based sealer and bioceramic sealer after ultrasonic agitation and Er: YAG laser activation of the irrigant.

Settings and Design

This was an in vitro study.

Materials and Methods

Extracted tooth samples (n = 42) into 06 groups (Group A-F) with 7 samples in each group. Postobturation transverse section was made and assessed under a confocal laser scanning microscope for the total dentinal tubule penetration area and recorded as the mean apical, middle, and coronal penetration.

Statistical Analysis

One-way analysis of variance test, followed by post hoc was used.

Results

The intergroup comparison showed that Group E and Group F have significantly more penetration as compared to the controls and ultrasonic irrigation, P < 0.001 and P < 0.01, respectively.

Conclusions

Er: YAG laser with AH plus sealer has the highest penetration in all the sections of tooth, followed by CeraSeal sealer.

In Situ Observation the Effect of Y on the Solidification Process of 7Mo-SASS under a Low Cooling Rate

The effects of Y on the solidification process of 7Mo super austenitic stainless steel (7MoSASS) under low cooling rate conditions (10 °C/min) were investigated using high-temperature confocal laser scanning microscopy (HT-CLSM). The in situ observation results indicate that Y samples promote an increase in austenite nucleation density. After 10 s of nucleation, the nucleation density increased by 149.53/mm2 for the Y sample. Furthermore, variance analysis indicated that Y addition improved the uniformity of the 7MoSASS solidification microstructure under low cooling rate conditions. The Johnson-Mehl-Avrami-Kolmogorov (JMAK) theory results showed that when the solid phase ratio was 0.5, the nucleation mode of the Y sample transitioned from saturation site nucleation to saturation site nucleation + Avrami nucleation. YAlO3 has a low lattice disregistry value with austenite, making it a suitable heterogeneous nucleation core for promoting the early nucleation of austenite. During the late stages of solidification, Y accumulates in the residual liquid phase, providing a greater degree of compositional undercooling. SEM-EDS analysis showed that Y contributed to the refinement of the 7MoSASS solidification microstructure, with the proportion of precipitated phases decreasing by approximately 7.5%. Cr and Mo were the main elements exhibiting positive segregation in 7MoSASS, and the Cr segregation ratio increased in the Y sample, while the Mo segregation ratio decreased.

Effect of different activation methods on the intratubular penetration of CaOH2 paste: Ex-vivo analysis by confocal laser scanning microscopy

The aim of this study was to evaluate the maximum penetration depth (MPD) and penetration area (PA) of CaOH2 paste agitated by different methods and to measure the pH after performing these methods. Fifty-five mandibular premolars were divided into control, GL and 4 experimental groups, GEC, GXP, GEDDY and GI (n = 11), where the paste was agitated with Easy Clean, XP-endo Finisher, EDDY and Irrisonic, respectively. The canals were instrumented and irrigated with NaOCl. The paste was manipulated with propylene glycol and rhodamine B dye. Root sections were examined using confocal laser scanning microscopy. There was no difference between groups regarding PA (p > 0.05). At 5 mm, MPD was greater in GEC than in GL or GEDDY, and greater in GI than in GL (p < 0.05). At 2 mm, MPD was greater in GEC than in the other groups (p < 0.05). In conclusion, both Easy Clean and Irrisonic promoted deeper paste penetration and were associated with higher pH levels.

Effective Detergency Determination for Single Polymeric Fibers Using Confocal Microscopy

Detergency determination for single polymeric fibers is of significant importance to screening effective detergents for laundry, but remains challenging. Herein, we demonstrate a novel and effective method to quantify the detergency for single polymeric fibers using a confocal laser scanning microscope (CLSM). It was applied to visualize the oil-removing process of single polymeric fibers and thus assess the detergency of various detergents. Four typical surfactants were selected for comparison, and a compounded detergent containing multiple components (e.g., anionic and nonionic surfactants, enzymes) was demonstrated to be the most effective and powerful soil-removing detergent because more than 50% of oil on the cotton fiber could be easily removed. Moreover, the oil removal process of three kinds of fibers (i.e., cotton, viscose, and polyester) was imaged and monitored by confocal microscopy. It was found that the percentage of the detergency of a single polyester fiber exceeded 70%, which is much higher than that of cotton and viscose fibers (~50%), which may be due to its relatively smooth surface. Compared to traditional methods, the CLSM imaging method is more feasible and effective to determine the detergency of detergents for single polymeric fibers.

The Contribution of Various In Vitro Methodologies to Comprehending the Filling Ability of Root Canal Pastes in Primary Teeth

A void-free obturation during root canal treatment on primary teeth is currently very difficult to attain. In this study, the pulpectomy filling abilities of Bio-C Pulpecto (Angelus, Basil, Londrina, Paraná, Brazil) and of zinc oxide eugenol, or "ZOE" (DenPro, Prevest, New York, NY, USA), were compared using several in vitro techniques. Therefore, 30 primary anterior teeth were used in the present in vitro study. Analysis of variance (ANOVA), including a multiple comparison procedure (Holm-Sidak method, Dunn's Method, or Tukey test), was used. On micro-CT, Bio-C Pulpecto exhibited higher void percentages than did ZOE (10.3 ± 3.8%, and 3.5 ± 1.3%), respectively (p < 0.05). With digital microscopy, higher total void percentages were found in the BC (13.2 ± 26.7%) group compared to the ZOE (2.7 ± 2.8%) group (p < 0.05). With the CLSM, mean tubular penetration depths were higher for Bio-C Pulpecto than for ZOE in all canal thirds (p < 0.05). SEM images demonstrated no tags into dentinal tubules in either group throughout the three thirds. Moreover, higher statistically significant flowability was found for Bio-C (2.657 ± 0.06 mm) compared to ZOE (1.8 ± 0.13 mm) (p < 0.05). The findings of this study indicate that neither ZOE nor Bio-C Pulpecto appears to meet the criteria for an ideal root canal filling paste for primary teeth. This study laid the groundwork for future research by determining how micro-CT, digital microscopy, SEM, and CLSM contribute to our understanding of the filling process of primary teeth. More thorough research on the mechanism of root canal obturation on primary teeth is required to achieve a long-term successful root canal therapy in young children.

Optimal Surface Pre-Reacted Glass Filler Ratio in a Dental Varnish Effective for Inhibition of Biofilm-Induced Root Dentin Demineralization

A unique type of dental varnish (DV) containing surface pre-reacted glass (S-PRG) fillers of different concentrations was evaluated to determine the unpresented optimal ratio for inhibiting root dentin bio-demineralization. S-PRG DVs (10% to 40%)—10%-S, 20%-S, 30%-S, and 40%-S—were applied to bovine root dentin blocks and compared with controls—0%-f (no S-PRG) and 5%-NaF (5%-NaF). The Streptococcus mutans biofilm challenge was executed inside and outside an oral biofilm reactor for 7 days. The specimens were examined using a confocal laser scanning microscope and swept-source optical coherence tomography. Furthermore, they were observed using a scanning electron microscope and analyzed using energy-dispersive X-ray spectroscopy. The roughness (SzJIS) due to leaching of DV materials and demineralization depth were significantly less in the S-PRG groups than the control groups (p < 0.05). Complete or partially plugged dentinal tubules (DTs) were observed in 20%-S, 30%-S, and 40%-S, while wide-open DTs were observed more in controls. Cylindrical tags were present in groups containing more than 20% S-PRG. F, Na, Al, and Sr were detected in a higher percentile ratio in the 20%-S, 30%-S, and 40%-S groups compared to 0%-f and 10%-S. Nonetheless, it is suggested that incorporating 20% to 30% S-PRG fillers in DVs would be effective enough as an anti-demineralization coating, together with supplementing minerals; further evaluation is required to validate these findings.

Can the hydrogel form of sodium ascorbate be used to reverse compromised resin infiltrant penetration after bleaching?

Aims

The aim of this study was to investigate the effects of an antioxidant on the bleaching-induced reduction in the penetration depth of infiltrant resins.

Materials and Methods

White spot lesions (WSLs) were created on 105 bovine tooth samples, each measuring 6 × 4 × 4 mm. Five samples were randomly selected for the examination of lesion characteristics. The remaining 100 samples were then divided into four groups (n = 25). In Group I, the WSLs were treated with resin infiltration (RI) only. RI was performed on Group II immediately after bleaching. In Group III, an antioxidant was applied for 2 h after bleaching, and this was immediately followed by RI. The Group IV samples were treated with RI at the end of a 1-week waiting period after bleaching. The penetration depths were evaluated through confocal laser scanning microscopy.

Results

The lowest penetration rate, which was approximately 57%, was observed in Group II. This was followed by Group III (87%), Group IV (90%), and Group I (92%). Group II, in which the samples were infiltrated immediately after bleaching, had the lowest mean penetration percentage. All the bleached groups exhibited significantly lower penetration percentages than the nonbleached group (Group I) (P < 0.05). Antioxidant application increased the penetration significantly (P < 0.05).

Conclusion

Application of sodium ascorbate was found to reverse the reduced resin penetration depth and penetration percentages resulting from bleaching. The postponement of adhesive procedures after bleaching yielded similar results.

Calcium (Ca2+) expression and intensity in cumulus-oocyte complex (COCs)in Kacang goat after vitrification

The process of vitrification of the cumulus-oocyte complex (COCs) often results in cold shock. When warming, heat shock occurs which can disrupt the balance of intracellular calcium (Ca2+) intensity. Drastic changes in temperature cause Reactive Oxygen Species (ROS), affecting changes on Ca2+ in COCs. The role of calcium is needed for oocyte activation in the fertilization process. The purpose of this study was to measure the expression of Ca2+ and the intensity of Ca2+ in COCs after vitrification. The study was divided into 2 groups, the control group (C) of fresh COCs, and the treatment group (T) of COCs after vitrification. After vitrification for 24 hours, then thawing, the expression of Ca2+ was examined using the Immunocytochemistry (ICC) method and the intensity of calcium (Ca2+) with a Confocal Laser Scanning Microscope (CLSM). The research data obtained were analyzed statistically by T-Test. The results showed that the expression of Ca2+ in the control group (12.00±0.00) was different from the treatment group (0.35±0.79). The intensity of Ca2+ in the control group (1059.43±489.59) was different from the treatment group (568.21±84.31). The conclusion of this study is that cryopreservation affects calcium in COCs; there were differences in the expression and the intensity of Ca2+ between fresh COCs and COCs after vitrification. Ca2+ intensity of COCs after vitrification was concentrated in the nucleus, while in fresh COCs it was concentrated in the cytoplasm.

CAD/CAM Resin-Based Composites for Use in Long-Term Temporary Fixed Dental Prostheses

The aim of this in vitro study was to analyse the performance of CAD/CAM resin-based composites for the fabrication of long-term temporary fixed dental prostheses (FDP) and to compare it to other commercially available alternative materials regarding its long-term stability. Four CAD/CAM materials [Structur CAD (SC), VITA CAD-Temp (CT), Grandio disc (GD), and Lava Esthetic (LE)] and two direct RBCs [(Structur 3 (S3) and LuxaCrown (LC)] were used to fabricate three-unit FDPs. 10/20 FDPs were subjected to thermal cycling and mechanical loading by chewing simulation and 10/20 FDPs were stored in distilled water. Two FDPs of each material were forwarded to additional image diagnostics prior and after chewing simulation. Fracture loads were measured and data were statistically analysed. SC is suitable for use as a long-term temporary (two years) three-unit FDP. In comparison to CT, SC featured significantly higher breaking forces (SC > 800 N; CT < 600 N) and the surface wear of the antagonists was (significantly) lower and the abrasion of the FDP was similar. The high breaking forces (1100–1327 N) of GD and the small difference compared to LE regarding flexural strength showed that the material might be used for the fabrication of three-unit FDPs. With the exception of S3, all analysed direct or indirect materials are suitable for the fabrication of temporary FDPs.

Comparative Evaluation of the Penetration Depth into Dentinal Tubules of Three Endodontic Irrigants

This study aimed to examine the penetration depth into dentinal tubules of some chelating agents. The 17% EDTA and two preparations containing surfactants (Smear Clear, Bioakt Endo) were tested. Surface tension and liquid viscosity were measured using a Dynamic Contact Angle Analyzer and a Haake rotational rheometer. To measure the penetration depth inside dentinal tubules, thirty maxillary central incisors were selected from a pool of extracted human permanent teeth and allocated to three experimental groups (10 samples each), as well as were mechanically shaped and cleansed with 5.25% NaOCl, followed by each of the chelators being labeled with 0.1 wt % Rhodamine B according to final irrigation protocol established. The samples were embedded in an epoxy resin, after which 200 μm thick transverse sections were obtained at 2, 5, and 8 mm from the apex with a saw microtome. The specimens were then observed using a confocal laser microscope (CLSM) and the penetration of the labeled solution was measured in every third of each sample. Statistical analysis was performed using ANOVA or Kruskal-Wallis tests according to the distribution of data, evaluated with the Shapiro-Wilk normality test. Viscosity and surface tension tests have shown that BioAKT Endo has the lowest values compared to EDTA and Smear Clear. The medium penetration depth did not significantly differ among the three irrigants, while it increased considerably from the apical to the coronal level in all groups. Additionally, the maximum penetration depth increased significantly from the apical to coronal level, while among groups, BioAKT Endo showed the highest values at the apical and middle level compared to the other irrigants. No significant differences were observed among the three groups in medium and maximum penetration depths when the entire root was considered. New irrigants containing surfactants show reduced surface tension and, in one case (BioAKT Endo), viscosity. The lowering of the surface tension allows for better penetration of liquids into dentinal tubules than EDTA alone, thus improving the cleaning of the root canal system.

A Confocal Microscopic Study on Percentage Penetration of Different Sealers into Dentin

Context:

Three-dimensional seal of the root canal space has always been challenging. The incorporation of gutta-percha and sealer prevents microleakage by bacteria, ensuring a shielded root canal space. However, the penetration of sealer to various depths within the root canal has always been looked with curiosity.

Aims:

Thus, the present in vitro study was undertaken to evaluate the percentage and average depth of penetration of Endoflas F. S., AH Plus, and Epiphany sealers into dentinal tubules among the coronal, middle, and apical thirds of the roots following obturation with a lateral compaction technique using Confocal Laser Scanning Microscopy.

Settings and Design:

The study is an in vitro randomized control trial.

Subjects and Methods:

Thirty sound central incisors were decoronated at the level of the cementoenamel junction. Working length determination was done followed by a meticulous cleaning, shaping, and under copious irrigation. The teeth were then randomly divided into three groups: Endoflas FS sealer, AH Plus sealer, and Epiphany sealer. On fluorescence treatment, the teeth were sectioned at the midpoint of coronal, middle, and apical third of each root and viewed under confocal laser scanning microscope.

Statistical Analysis Used:

The results were analyzed using one-way ANOVA, and the significant difference between groups was analyzed with post hoc Tukey test.

Results:

Epiphany sealer provided with better percentage and depth penetration in comparison to Endoflas FS and AH Plus sealers. Furthermore, the coronal third of the root had better percentage and sealer penetration than the middle and apical thirds.

Conclusions:

Sealers tend to provide a firm bond between the tooth and the gutta-percha. They bind, lubricate, and seal the gutta-percha cones to fill the accessory canals. Within the limitations of this study, the superior flow and enhanced setting time Epihany sealers provide better percentage and depth of penetration than AH Plus and Endoflas FS.

Dentinal tubule penetration of gutta-percha with syringe-mix resin sealer using different obturation techniques: A confocal laser scanning microscopy study

This study aimed to evaluate dentinal tubule penetration of the root canal filling material using various techniques such as cold lateral compaction, new generation thermoplastic core carrier and continuous-wave obturation. The root canals of premolar teeth were instrumented, and the teeth were allocated randomly to three groups (n = 15/group). After the obturation with three different techniques, three sections of 2-mm thickness at 2, 5 and 8-mm from the apex were examined under a confocal laser scanning microscope. The data were analysed of variance with a significance level of P < 0.05. There was no significant difference between techniques when parameters were evaluated in total (penetration depth P = 0.418, penetration area P = 0.701). The mean value of the cold lateral compaction group for maximum penetration depth was obtained higher than continuous wave (P = 0.004), whilst there was no significant difference between the thermoplastic core carrier and the other groups.

Qualitative Comparison of 2D and 3D Atmospheric Corrosion Detection Methods

In this article, we report the use of a Confocal Laser Scanning Microscope (CLSM) to apply a qualitative assessment of atmospheric corrosion on steel samples. From the CLSM, we obtain high-resolution images, together with a 3D heightmap. The performance of four different segmentation algorithms that use the high-resolution images as input is qualitatively assessed and discussed. A novel 3D segmentation algorithm based on the shape index is presented and compared to the 2D segmentation algorithms. From this analysis, we conclude that there is a significant difference in performance between the 2D segmentation algorithms and that the 3D method can be an added value to the detection of corrosion.

Debunking the Concept of Dentinal Tubule Penetration of Endodontic Sealers: Sealer Staining with Rhodamine B Fluorescent Dye Is an Inadequate Method

The aim of this study was to investigate the suitability of rhodamine B dye staining of an epoxy resin sealer (AH Plus) and calcium-silicate-based sealers (Total Fill BC Sealer, BioRoot RCS) to represent the penetration depth of the sealers into dentinal tubules after root canal obturation. In a three-step process, (1) leaching of rhodamine B from sealers into a buffer solution, (2) passive penetration of leached rhodamine B into dentinal tubules, and (3) conformity of rhodamine B penetration assessed by confocal laser scanning microscopy (CLSM), and sealer penetration assessed by scanning electron microscopy (SEM), in root-canal-filled teeth, were evaluated. Rhodamine B dye massively leached out of Total Fill BC Sealer and BioRoot RCS into the phosphate-buffered saline (PBS). A pinkish coloration of AH Plus was found after contact with PBS. Leached rhodamine B dye passively penetrated dentinal tubules from all three sealers when placed on root dentin. No correlation was observed between sealer penetration in SEM and rhodamine B penetration in CLSM. Staining of sealers using rhodamine B is an inadequate method with which to evaluate sealer penetration depth into dentinal tubules, as it overestimates the penetration of sealers into root dentin tubules.

TPLATE Recruitment Reveals Endocytic Dynamics at Sites of Symbiotic Interface Assembly in Arbuscular Mycorrhizal Interactions

Introduction: Arbuscular mycorrhizal (AM) symbiosis between soil fungi and the majority of plants is based on a mutualistic exchange of organic and inorganic nutrients. This takes place inside root cortical cells that harbor an arbuscule: a highly branched intracellular fungal hypha enveloped by an extension of the host cell membrane-the perifungal membrane-which outlines a specialized symbiotic interface compartment. The perifungal membrane develops around each intracellular hypha as the symbiotic fungus proceeds across the root tissues; its biogenesis is the result of an extensive exocytic process and shows a few similarities with cell plate insertion which occurs at the end of somatic cytokinesis. Materials and Methods: We here analyzed the subcellular localization of a GFP fusion with TPLATE, a subunit of the endocytic TPLATE complex (TPC), a central actor in plant clathrin-mediated endocytosis with a role in cell plate anchoring with the parental plasma membrane. Results: Our observations demonstrate that Daucus carota and Medicago truncatula root organ cultures expressing a 35S::AtTPLATE-GFP construct accumulate strong fluorescent green signal at sites of symbiotic interface construction, along recently formed perifungal membranes and at sites of cell-to-cell hyphal passage between adjacent cortical cells, where the perifungal membrane fuses with the plasmalemma. Discussion: Our results strongly suggest that TPC-mediated endocytic processes are active during perifungal membrane interface biogenesis-alongside exocytic transport. This novel conclusion, which might be correlated to the accumulation of late endosomes in the vicinity of the developing interface, hints at the involvement of TPC-dependent membrane remodeling during the intracellular accommodation of AM fungi.

Effect of ultrasonic activation on dentinal tubule penetration of calcium silicate-based cements

This study investigated the dentinal tubule penetration of mineral trioxide aggregate (MTA), NeoMTA Plus and Biodentine placed by either manual condensation or ultrasonic activation in simulated open apex model. Standardized divergent open apex models were created using palatal roots of 60 human maxillary molars and divided into six groups according to the used cements and activation methods (n = 10): MTA-manual condensation, MTA-ultrasonic activation, NeoMTA Plus-manual condensation, NeoMTA Plus-ultrasonic activation, Biodentine-manual condensation, Biodentine-ultrasonic activation. For the measurement of penetration, the cements were mixed with 0.1% Rhodamin B and 6-mm apical portions of each root canal were obturated in an orthograde direction. The roots were embedded into acrylic blocks, and 1-mm-thick sections were obtained at 3 mm from the apex. Specimens were mounted onto glass slides and scanned under a confocal laser scanning microscope (CLSM) and stereomicroscope. Dentinal tubule penetration areas, depth and percentage were measured using LSM and ImageJ software. The data were analyzed using two-way analysis of variance (anova) with Bonferroni correction (α = 0.05). No correlation was found between stereomicroscope and CLSM analyses (p > .05). CLSM analysis showed no significant differences between MTA, NeoMTA Plus, and Biodentine groups when manual condensation was used (p > .05). Ultrasonic activation did not increase the tubular penetration of MTA, NeoMTA Plus or Biodentine as compared to manual condensation of each material (p > .05). MTA, NeoMTA Plus and Biodentine showed similar tubular penetration when manual condensation was used. Ultrasonic activation of these cements had no effect on tubular penetration of each material as compared to the manual condensation counterparts.

Introducing BAIT (Biofilm Architecture Inference Tool): a software program to evaluate the architecture of oral multi-species biofilms

Biofilm model systems are used to study biofilm growth and predict the effects of anti-biofilm interventions within the human oral cavity. Many in vitro biofilm model systems use a confocal laser scanning microscope (CLSM) in conjunction with image analysis tools to study biofilms. The aim of this study was to evaluate an in-house developed image analysis software program that we call BAIT (Biofilm Architecture Inference Tool) to quantify the architecture of oral multi-species biofilms following anti-biofilm interventions using a microfluidic biofilm system. Differences in architecture were compared between untreated biofilms and those treated with water (negative control), sodium gluconate ('placebo') or stannous fluoride (SnF2). The microfluidic system was inoculated with pooled human saliva and biofilms were developed over 22 h in filter-sterilized 25 % pooled human saliva. During this period, biofilms were treated with water, sodium gluconate, or SnF2 (1000, 3439 or 10 000 p.p.m. Sn2+) 8 and 18 h post-inoculation. After 22 h of growth, biofilms were stained with LIVE/DEAD stain, and imaged by CLSM. BAIT was used to calculate biofilm biovolume, total number of objects, surface area, fluffiness, connectivity, convex hull porosity and viability. Image analysis showed oral biofilm architecture was significantly altered by 3439 and 10 000 p.p.m. Sn2+ treatment regimens, resulting in decreased biovolume, surface area, number of objects and connectivity, while fluffiness increased (P<0.01). In conclusion, BAIT was shown to be able to measure the changes in biofilm architecture and detects possible antimicrobial and anti-biofilm effects of candidate agents.

Biofilm diversity, structure and matrix seasonality in a full-scale cooling tower

Biofilms commonly colonise cooling water systems, causing equipment damage and interference with the operational requirements of the systems. In this study, next-generation sequencing (NGS), catalysed reporter deposition fluorescence in situ hybridisation (CARD-FISH), lectin staining and microscopy were used to evaluate temporal dynamics in the diversity and structure of biofilms collected seasonally over one year from an open full-scale cooling tower. Water samples were analysed to evaluate the contribution of the suspended microorganisms to the biofilm composition and structure. Alphaproteobacteria dominated the biofilm communities along with Beta- and Gammaproteobacteria. The phototrophic components were mainly cyanobacteria, diatoms and green algae. Bacterial biodiversity decreased from winter to autumn, concurrently with an increase in cyanobacterial and microalgal richness. Differences in structure, spatial organisation and glycoconjugates were observed among assemblages during the year. Overall, microbial variation appeared to be mostly affected by irradiance and water temperature rather than the source of the communities. Variations in biofilms over seasons should be evaluated to develop specific control strategies.

Influence of the EndoActivator Irrigation System on Dentinal Tubule Penetration of a Novel Tricalcium Silicate-Based Sealer

This study compared the effects of a conventional endodontic needle with an agitation system on a novel tricalcium silicate-based sealer (NTS) in terms of dentinal tubule penetration and interfacial adaptation to a root canal. Fifty single-rooted, recently-extracted human maxillary central incisors were randomly distributed into two homogeneous groups characterized by two different final cleansing systems: Conventional endodontic needle, or EndoActivator^®. After instrumentation, all the teeth were filled with the gutta-percha single cone technique in conjunction with the novel tricalcium silicate-based sealer. Teeth were horizontally sectioned at 1 and 5 mm from the apex and were observed under a confocal laser scanning microscope (CLSM) at five magnifications. The maximum, mean, and the circumferential percentage of the sealer penetration inside the tubules were measured. Moreover, the gap width was evaluated using Image J software (National Institutes of Health, Bethesda, MD). EndoActivator^® did not result in a significantly higher circumferential percentage of sealer penetration than conventional irrigation (p > 0.05). However, the gap width was significantly lower with EndoActivator^®, compared to conventional needles at both 1 mm (p = 0.035) and 5 mm (p = 0.038). The EndoActivator^® irrigation system did not significantly improve the NTS penetration, as compared to the conventional endodontic needle irrigation. Activation of the irrigation reduced the gap width significantly.

Comparative Evaluation of Dentinal Caries in Restored Cavity Prepared By Galvanic and Sintered Burs

BACKGROUND

The occurrence of secondary caries is the most common reason for the restorations failures.

AIM

The aim of the study was to evaluate and compare the anticaries effect of copper ions on the teeth restored with glass ionomer cement (GIC) and composite restorations in the cavity prepared by galvanic and sintered burs.

MATERIALS AND METHODS

A total of 40 premolars were divided into two halves buccolingually. Class V cavity was prepared with sintered diamond burs and galvanic diamond bur. Cavities were restored with either GIC or composite resin. The monospecies artificial microbial caries model was selected for induction of secondary caries. The lesions were measured at junction of restoration by confocal laser scanning microscope.

RESULTS

The results were statistically significant (P < 0.001) and suggested that the width of lesion was lowest in cavity prepared by sintered bur and restored with composite resin.

CONCLUSION

The use of different burs in combination with various restorative materials influence the occurrence and width of caries lesion.

Easy and low-cost stable positioning of suspension cells during live-cell imaging

Dynamic processes of cells can be best monitored when living cells are analyzed by imaging. While it is easy to observe adherent living cells it has been extremely challenging to analyze suspension cells. This cell type floats freely in the culture dish, and it is only a question of time when the focus or the observation field is lost. In order to keep the cells in focus, an easy and inexpensive method allowing the observation of living suspension cells during confocal laser scanning microscope imaging was developed.

Wear profile of canal wall surfaces and bond strength of endodontic sealers after in situ acid challenge

AIM

To evaluate the wear of root wall surfaces, the bond strength of sealers to dentine and the demineralization around root filling materials after canals were exposed to acid challenge in situ.

METHODOLOGY

Eighty-seven roots of mandibular incisors were selected. Thirty-two were used in the laboratory bond strength study (n = 8), and 55 in the in situ study (n = 11). Root canals were prepared biomechanically and then filled with gutta-percha and AH Plus, MTA Fillapex, Sealapex or Endofill. For 14 days, 11 participants used intra-oral devices with five sterilized roots (four experimental and one control - only canal prepared). Drops of sucrose were dripped onto roots allowing the accumulation of biofilm on canal surfaces. Roots were removed, sectioned and analysed for the following: bond strength of filling material using a push-out test and also wear profile and dentine demineralization using confocal microscopy. Bond strength (MPa) was evaluated by two-way anova and Tukey test (α = 0.05), and wear profile was assessed by Kruskal-Wallis and t-tests (α = 0.05).

RESULTS

AH Plus had the highest bond strength values. Intermediate results were found in roots with MTA Fillapex and Endofill, whilst Sealapex had inferior results (P < 0.05). No significant differences were found amongst root thirds (P > 0.05). For wear profile, samples were associated with degradation of the filling materials after exposure to the oral environment (P < 0.05). Roots had signs of demineralization around the filling material when Sealapex and Endofill were used.

CONCLUSIONS

Sealers were not able to prevent degradation of the adhesive interface and dentine. AH Plus and MTA Fillapex had superior bond strength to dentine and less intense demineralization around the root filling.

A novel quantitative volumetric spreading index definition and assessment of astrocyte spreading in vitro

A novel quantitative volumetric spreading index (VSI) is defined that depends on the total distance between object voxels and the contact surface plane in three-dimensional (3D) space. The VSI, which ranges from 0 to 1, is rotationally invariant around the z-axis. VSI can be used to quantify the degree of individual cell spreading, which is important for analysis of cell interactions with their environment. The VSIs of astrocytes cultured on a nanofibrillar surface and three different comparative planar surfaces have been calculated from confocal laser scanning microscope z-series images, and the effects of both culture surface and immunoreactivity on the degree of cell spreading were investigated. VSI calculations indicated a statistical correlation between increased reactivity, based on immunolabeling for glial fibrillary acidic protein, and decreased cell spreading. Further results provided a quantitative measure for the increased spreading of quiescent-like and reactive-like astrocytes on planar substrates functionalized with poly-l-lysine. © 2017 International Society for Advancement of Cytometry.

Microstructure and Quantitative Micromechanical Analysis of Wood Cell-Emulsion Polymer Isocyanate and Urea-Formaldehyde Interphases

Emulsion polymer isocyanate (EPI) and urea-formaldehyde (UF) were selected as typical resin systems to investigate the microstructure of wood-adhesive interphases by fluorescence microscopy (FM) and confocal laser scanning microscopy (CLSM). Further, a quantitative micromechanical analysis of the interphases was conducted using nanoindentation. The FM results showed that the UF resin could penetrate the wood to a greater extent than the EPI resin, and that the average penetration depth for these two resin systems was higher in the case of latewood. CLSM allowed visualization of the resin distribution with contrasting colors, showing that the EPI resin could not penetrate the cell wall, whereas UF resin could enter the cell walls. The micromechanical properties of the cell walls were almost unaffected by EPI penetration but were significantly affected by UF penetration, especially in the first cell wall from the glueline. This further confirmed that only cell walls with resin penetration can improve the mechanical properties of the interphase regions.

In Vitro Studies on a Microfluidic Sensor with Embedded Obstacles Using New Antibacterial Synthetic Compounds (1-TDPPO) Mixed Prop-2-en-1-one with Difluoro Phenyl

This paper describes the use of an analytical microfluidic sensor for accelerating chemo-repellent response and strong anti-bacterial 1-(Thien-2-yl)-3-(2, 6-difluoro phenyl) prop-2-en-1-one (1-TDPPO). The chemically-synthesized antimicrobial agent, which included prop-2-en-1-one and difluoro phenyl groups, was moving through an optically transparent polydimethylsiloxane (PDMS) microfluidic sensor with circular obstacles arranged evenly. The response, growth and distribution of fluorescent labeling Pseudomonas aeruginosa PAO1 against the antimicrobial agent were monitored by confocal laser scanning microscope (CLSM). The microfluidic sensor along with 1-TDPPOin this study exhibits the following advantages: (i) Real-time chemo-repellent responses of cell dynamics; (ii) Rapid eradication of biofilm by embedded obstacles and powerful antibacterial agents, which significantly reduce the response time compared to classical methods; (iii) Minimal consumption of cells and antimicrobial agents; and (iv) Simplifying the process of the normalization of the fluorescence intensity and monitoring of biofilm by captured images and datasets.

Terbinafine Hydrochloride Trans-ungual Delivery via Nanovesicular Systems: In Vitro Characterization and Ex Vivo Evaluation

Treating a nail infection like onychomycosis is challenging as the human nail plate acts as a formidable barrier against all drug permeation. Available oral and topical treatments have several setbacks. Terbinafine hydrochloride (TBH), belonging to the allylamine class, is mainly used for treatment of onychomycosis. This study aims to formulate TBH in a nanobased spanlastic vesicular carrier that enables and enhances the drug delivery through the nail. The nanovesicles were formulated by ethanol injection method, using either Span® 60 or Span® 65, together with Tween 80 or sodium deoxycholate as an edge activator. A full factorial design was implemented to study the effect of different formulation and process variables on the prepared TBH-loaded spanlastic nanovesicles. TBH entrapment efficiency percentages, particle size diameter, percentage drug released after 2 h and 8 h were selected as dependent variables. Optimization was performed using Design-Expert® software to obtain an optimized formulation with high entrapment efficiency (62.35 ± 8.91%), average particle size of 438.45 ± 70.5 nm, and 29.57 ± 0.93 and 59.53 ± 1.73% TBH released after 2 and 8 h, respectively. The optimized formula was evaluated using differential scanning calorimetry and X-ray diffraction and was also morphologically examined using transmission electron microscopy. An ex vivo study was conducted to determine the permeation and retainment of the optimized formulation in a human cadaver nail plate, and confocal laser scanning microscope was used to show the extent of formulation permeation. In conclusion, the results confirmed that spanlastics exhibit promising results for the trans-ungual delivery of TBH.

Effect of paeoniflorin on the calcium ion concentration in salivary gland cells using confocal laser scanning microscopy

OBJECTIVE

To investigate the effects of paeoniflorin, the main monomer component of Jinxueyuan granules, on the Ca²⁺ concentrations in salivary gland cells to further explore the salivation-promoting mechanism and effective monomer components of Jinxueyuan granules.

METHODS

The salivary gland cells of suckling rats were cultured in vitro and loaded with a Fluo-3AM fluorescent probe, and changes in the intracellular Ca²⁺ concentrations were observed using a confocal laser scanning microscope.

RESULTS

No significant changes in the intracellular Ca²⁺ concentrations were demonstrated (P>0.05) in the paeoniflorin-free Hank's media treatment group or in the higher-dose paeoniflorin (10^-2 mol/L) Hank's media treatment group; however, a significant increase in the intracellular Ca²⁺ concentration in the lower-dose paeoniflorin (10^-4 mol/L) treatment group was observed (P=0.001). Further study showed that treatment with the calcium channel blocker verapamil hydrochloride or with Ca²⁺-free D-Hank's media did not block the paeoniflorin-induced (10^-4 mol/L) increase in intracellular Ca²⁺ (P<0.05).

CONCLUSION

Paeoniflorin promotes the release of endogenous calcium to upregulate the intracellular Ca²⁺ concentration. Further studies should be performed to investigate the association between paeoniflorin and the Ca²⁺ concentration in salivary gland cells and to elucidate the corresponding functional pathways.

Influence of erbium, chromium-doped: Yttrium scandium-gallium-garnet laser etching and traditional etching systems on depth of resin penetration in enamel: A confocal laser scanning electron microscope study

OBJECTIVE

This study was performed to assess the resin tag length penetration in enamel surface after bonding of brackets to identify which system was most efficient.

METHODOLOGY

Our study was based on a more robust confocal microscopy for visualizing the resin tags in enamel. Totally, 100 extracted human first and second premolars have been selected for this study and were randomly divided into ten groups of 10 teeth each. In Group 1, the buccal enamel surface was etched with 37% phosphoric acid (3M ESPE), Group 2 with 37% phosphoric (Ultradent). In Groups 5, 6, and 7, erbium, chromium-doped: Yttrium scandium-gallium-garnet (Er, Cr: YSGG) laser (Biolase) was used for etching the using following specifications: Group 5 (1.5 W/20 Hz, 15 s), Group 6 (2 W/10 Hz, 15 s), and Group 7 (2 W/20 Hz, 15 s). In Groups 8, 9, and 10, Er, Cr: YSGG laser (Biolase) using same specifications and additional to this step, conventional etching on the buccal enamel surface was etched with 37% (3M ESPE) after laser etching. In Groups 1, 5, 6, 7, 8, 9, and 10 3M Unitek Transbond XT primer was mixed with Rhodamine B dye (Sigma-Aldrich, Germany) to etched surface and then cured for 20 s. In Group 2, Ultradents bonding agent was mixed with Rhodamine B. In Group 3, 3M Unitek Transbond PLUS, Monrovia, USA, which was mixed with Rhodamine B dye (Sigma-Aldrich, Germany). Group 4, with self-etching primer (Ultradent-Peak SE, USA) was mixed with Rhodamine B dye (Sigma-Aldrich, Germany). Later (3M Unitek, Transbond XT, Monrovia USA) [Figure 1] was used to bond the modified Begg brackets (T. P. Orthodontics) in Groups 1, 3, 5, 6, 7, 8, 9, and 10. In Groups 2, 4 Ultradent-Peak LC Bond was used to bond the modified brackets. After curing brackets were debonded, and enamel depth penetration was assessed using confocal laser scanning microscope.

RESULTS

Group J had a mean maximum depth of penetration of 100.876 μm, and Group D was the least having a maximum value of 44.254 μm.

CONCLUSIONS

Laser alone groups had comparable depths of penetration to that of self-etching groups but much lower than conventional acid etched groups.

Comparison of bacterial leakage resistance of various root canal filling materials and methods: Confocal laser-scanning microscope study

This study evaluated the bacterial leakage resistance and root canal lining efficacy of various root canal filling materials and methods by using confocal laser-scanning microscope (CLSM). Sixty extracted human premolars with mature apex and single root canal were randomly divided into 2 control groups and 4 experimental groups. Group CW was filled with continuous wave technique using gutta-percha and AH Plus sealer. Group GC was coated with AH-Plus sealer and then obturated with soften GuttaCore. Group GF was obturated using GuttaFlow and gutta-percha. Group EM was filled with EndoSeal MTA and gutta-percha using ultrasonic vibration. The AH-Plus, GuttaFlow, and EndoSeal were labeled with Hoechst 33342 to facilitate fluorescence. The obturated root tip was incubated with Carboxyfluorescein diacetate succinimidyl ester (CFSE)-stained E. faecalis for 14 days. CLSM was performed to evaluate the sealer distribution and bacterial leakage for the apical 1-, 2-, 3-mm specimens. Statistically significant differences were determined by 1-way ANOVA with Tukey's post-hoc test and Pearson's correlation analysis. Group EM showed the better sealer distribution score than the other groups (p < 0.05). Group CW and group GC exhibited the less bacterial leakage than the group GF, while group EM showed the similar bacterial leakage score with the groups CW and GC. There was no significant correlation between the sealer distribution and bacterial leakage (p > 0.05). Under the conditions of this study, different root canal filling materials and methods showed different efficacy for canal distribution and bacterial leakage resistance.

Sealing ability of three root-end filling materials prepared using an erbium: Yttrium aluminium garnet laser and endosonic tip evaluated by confocal laser scanning microscopy

Aims:

(1) To compare the sealing ability of mineral trioxide aggregate (MTA), Biodentine, and Chitra-calcium phosphate cement (CPC) when used as root-end filling, evaluated under confocal laser scanning microscope using Rhodamine B dye. (2) To evaluate effect of ultrasonic retroprep tip and an erbium:yttrium aluminium garnet (Er:YAG) laser on the integrity of three different root-end filling materials.

Materials and Methods:

The root canals of 80 extracted teeth were instrumented and obturated with gutta-percha. The apical 3 mm of each tooth was resected and 3 mm root-end preparation was made using ultrasonic tip (n = 30) and Er:YAG laser (n = 30). MTA, Biodentine, and Chitra-CPC were used to restore 10 teeth each. The samples were coated with varnish and after drying, they were immersed in Rhodamine B dye for 24 h. The teeth were then rinsed, sectioned longitudinally, and observed under confocal laser scanning microscope.

Statistical Analysis Used:

Data were analyzed using one-way analysis of variance (ANOVA) and a post-hoc Tukey's test at P < 0.05 (R software version 3.1.0).

Results:

Comparison of microleakage showed maximum peak value of 0.45 mm for Biodentine, 0.85 mm for MTA, and 1.05 mm for Chitra-CPC. The amount of dye penetration was found to be lesser in root ends prepared using Er:YAG laser when compared with ultrasonics, the difference was found to be statistically significant (P < 0.05).

Conclusions:

Root-end cavities prepared with Er:YAG laser and restored with Biodentine showed superior sealing ability compared to those prepared with ultrasonics.

Preprophase band formation and cortical division zone establishment: RanGAP behaves differently from microtubules during their band formation

Correct positioning of the division plane is a prerequisite for plant morphogenesis. The preprophase band (PPB) is a key intracellular structure of division site determination. PPB forms in G2 phase as a broad band of microtubules (MTs) that narrows in prophase and specializes few-micrometer-wide cortical belt region, named the cortical division zone (CDZ), in late prophase. The PPB comprises several molecules, some of which act as MT band organization and others remain in the CDZ marking the correct insertion of the cell plate in telophase. Ran GTPase-activating protein (RanGAP) is accumulated in the CDZ and forms a RanGAP band in prophase. However, little is known about when and how RanGAPs gather in the CDZ, and especially with regard to their relationships to MT band formation. Here, we examined the spatial and temporal distribution of RanGAPs and MTs in the preprophase of onion root tip cells using confocal laser scanning microscopy and showed that the RanGAP band appeared in mid-prophase as the width of MT band was reduced to nearly 7 µm. Treatments with cytoskeletal inhibitors for 15 min caused thinning or broadening of the MT band but had little effects on RanGAP band in mid-prophase and most of late prophase cells. Detailed image analyses of the spatial distribution of RanGAP band and MT band showed that the RanGAP band positioned slightly beneath the MT band in mid-prophase. These results raise a possibility that RanGAP behaves differently from MTs during their band formation.

Erosive potential of soft drinks on human enamel: an in vitro study

BACKGROUND/PURPOSE

Most soft drinks are acidic in nature. Regular consumption of these drinks may result in dental erosion. The aim of this in vitro study was to evaluate the erosive potential of different soft drinks in Taiwan by a novel multiple erosive method.

METHODS

Four commercially available soft drinks in Taiwan were selected for this study. The properties of each product were analyzed to measure their pH, titratable acidity, and ion contents. The erosive potential of the soft drinks was measured based on the amount of loss of human enamel surface following its exposure to the soft drinks tested for different periods (20 minutes, 60 minutes, and 180 minutes). The enamel loss was measured using a confocal laser scanning microscope.

RESULTS

The pH values of the soft drinks were below the critical pH value (5.5) for enamel demineralization, and ranged from 2.42 to 3.46. The drink with ingredients of citric acid and ascorbic acid had the highest titratable acidity (33.96 mmol OH(-)/L to pH 5.5 and 71.9 mmol OH(-)/L to pH 7). Exposure to all the soft drinks resulted in loss of human enamel surface (7.28-34.07 μm for 180-minute exposure). The beverage with the highest calcium content had the lowest erosive potential.

CONCLUSION

All tested soft drinks were found to be erosive. Soft drinks with high calcium contents have significantly lower erosive potential. Low pH value and high citrate content may cause more surface enamel loss. As the erosive time increased, the titratable acidity to pH 7 may be a predictor of the erosive potential for acidic soft drinks. The erosive potential of the soft drinks may be predicted based on the types of acid content, pH value, titratable acidity, and ion concentration.

Novel self-emulsifying formulation of quercetin for improved in vivo antioxidant potential: implications for drug-induced cardiotoxicity and nephrotoxicity

Quercetin (QT) was formulated into a novel self-emulsifying drug delivery system (SEDDS) to improve its oral bioavailability and antioxidant potential compared to free drug. Capmul MCM was selected as the oily phase on the basis of optimum solubility of QT in oil. Tween 20 and ethanol were selected as surfactant and cosurfactant from a large pool of excipients, depending upon their spontaneous self-emulsifying ability with the selected oily phase. Pseudoternary-phase diagrams were constructed to identify the efficient self-emulsification regions in various dilution media, viz., water, pH 1.2, and pH 6.8. The ratio of 40:40:20 w/w, Capmul MCM:QT (19:1)/Tween 20/ethanol was optimized based on its ability to form a spontaneous submicrometer emulsion in simulated gastrointestinal fluids. DPPH scavenging assay showed comparable antioxidant activity of QT-SEDDS to free QT. QT-SEDDS was robust in terms of stability against short-term excursion of freeze/thaw cycles and accelerated stability for 6 months as per International Conference on Harmonisation guidelines. A fluorescent dye-loaded SEDDS formulation showed rapid internalization within 1h of incubation with Caco-2 cells as evident by confocal laser scanning microscopy. QT-SEDDS showed a significant increase in cellular uptake by 23.75-fold in comparison with free QT cultured with Caco-2 cells. The SEDDS demonstrated ~5-fold enhancement in oral bioavailability compared to free QT suspension. The in vitro-in vivo relation between in vitro Caco-2 cell uptake and in vivo pharmacokinetics of QT-SEDDS showed a correlation coefficient of ~0.9961, as evident from a Levy plot. Finally, QT-SEDDS showed a significantly higher in vivo antioxidant potential compared to free QT when evaluated as a function of ability to combat doxorubicin- and cyclosporin A-induced cardiotoxicity and nephrotoxicity, respectively.

Secretagogin-containing neurons in the mouse main olfactory bulb

Secretagogin (SCGN) is a recently discovered calcium binding protein of the EF hand family. We studied the structural features of SCGN-positive neurons in the mouse main olfactory bulb (MOB). SCGN-positive neurons were localized throughout layers but clustered in the glomerular layer (GL), mitral cell layer (MCL) and granule cell layer (GCL). They were heterogeneous, including numerous juxtaglomerular neurons, granule cells, small to medium-sized neurons in the external plexiform layer (EPL), and a few small cells in the ependymal/subependymal layer. Calretinin and/or tyrosine hydroxylase occasionally colocalized in SCGN-positive juxtaglomerular neurons. Calretinin also frequently colocalized in SCGN-positive EPL and GCL neurons. Morphologically some of juxtaglomerular SCGN-positive neurons were classical periglomerular cells, whereas others were apparently different from those periglomerular cells, although they were further heterogeneous. Some extended one slender process into a glomerulus which passed the glomerulus and further penetrated into another nearby glomeruli, and thus their dendritic processes spanned two or three or more glomeruli. We named this type of juxtaglomerular neurons "transglomerular cells." With the stereological analysis we estimated total number of juxtaglomerular SCGN-positive neurons at about 80,000/single MOB. The present study revealed the diversity of SCGN-positive neurons in the mouse MOB and their particular structural properties hitherto unknown.

The activation and differential signalling of the growth hormone receptor induced by pGH or anti-idiotypic monoclonal antibodies in primary rat hepatocytes

In this report, we have developed a panel of monoclonal anti-idiotypic antibodies to pGH by immunising BALB/c mice with a purified monoclonal anti-pGH antibody (1A3), among which one mAb, termed CG-8F, was selected for further characterisation. We found that CG-8F behaved as a typical Ab2β, not only conformationally competing with pGH for 1A3 but also exhibiting recognition for GHR in a rat hepatocyte model. We next examined the resulting signal transduction pathways triggered by this antibody in rat hepatocytes and found that both pGH and CG-8F could trigger the JAK2-STAT1/3/5-mediated signal transduction pathway. Furthermore, the phosphorylation kinetics of pSTAT1/3/5 induced by either pGH or CG-8F were remarkably similar in the dose-response and time course rat hepatocyte experiments. In contrast, only pGH, but not CG-8F, was capable of inducing ERK phosphorylation. Further experimental studies indicated that the two functional binding sites on CG-8F are required for GHR activation. This study partially reveals the mechanism of action of GH anti-idiotypic antibodies and also indicates that monoclonal anti-idiotypic antibodies represent an effective way to produce GH mimics, suggesting that it is possible to produce signal-specific cytokine agonists using an anti-idiotypic antibody approach.

Influence of various herbal irrigants as a final rinse on the adherence of Enterococcus faecalis by fluorescence confocal laser scanning microscope

Aim:

The aim of this study was to assess the antibacterial efficacy of three different herbal irrigants against Enterococcus faecalis.

Materials and Methods:

Single rooted teeth were extracted due to orthodontic and periodontal reasons. The teeth were then inoculated with E. faecalis. The teeth were randomly divided into three experimental groups and two control groups of six samples each. Group 1 specimens were treated with 5.2% sodium hypochlorite (NaOCL) for 30 min followed by 5 mmol/L Ethylenediaminetetraacetic acid (EDTA) for 5 min and saline as final irrigant. Group 2 specimens were treated with and 5.2% NaOCl for 30 min as final irrigant. Group 3 were treated with Morinda citrifolia (MC) for 30 min as final irrigant. Group 4 were treated with Azadiracta indica (AI) as final irrigant. Group 5 were treated with green tea (GT) for 30 min as final irrigant. The dentin specimens were carefully spread onto a microscope slide and stained with BacLight and examined in a confocal laser scanning microscope set to monitor fluorescein isothiocyanate and propidium iodide. A total of nine fields were examined for each treatment and the bacteria presented were counted.

Statistical Analysis:

Using the one-way ANOVA with multiple comparison, significantly less bacteria were found adhering to the samples treated with Neem followed by NaOCL, GT, MC, Saline.

Results:

AI treatment produced the maximum reduction in adherence of E. faecalis to dentin (9.30%) followed by NaOCl (12.50%), GT (27.30%), MC (44.20%) and saline (86.70%).

Conclusion:

Neem is effective in preventing adhesion of E. faecalis to dentin.

TM5275 prolongs secreted tissue plasminogen activator retention and enhances fibrinolysis on vascular endothelial cells

INTRODUCTION

Elevated plasminogen activator inhibitor-1 (PAI-1) reduces fibrinolytic potential in plasma, contributing to thrombotic disease. Thus, inhibiting PAI-1 activity is clinically desirable. We recently demonstrated that tissue plasminogen activator (tPA) remains on the surface of vascular endothelial cells (VECs) after secretion in a heavy-chain dependent manner, which is essential for high fibrinolytic activity on the surface of VECs, and that PAI-1 dissociates retained tPA from the cell surface as a result of high-molecular weight complex formation. Based on the model whereby amounts of tPA and its equilibrium with PAI-1 dynamically change after exocytosis, we examined how TM5275, a newly synthesized small molecule PAI-1 inhibitor, modulated tPA retention and VEC surface-derived fibrinolytic activity using microscopic techniques.

MATERIALS AND METHODS

The effects of TM5275 on the kinetics of the secretion and retention of green fluorescent protein (GFP)-tagged tPA (tPA-GFP) on VECs were analyzed using total internal reflection fluorescence microscopy. The effects of TM5275 on the generation of plasmin activity were evaluated by both plasminogen accumulation and fibrin clot lysis on tPA-GFP-expressing VECs using confocal laser scanning microscopy.

RESULTS

TM5275 at concentrations of 20 and 100 μM significantly prolonged the retention of tPA-GFP on VECs by inhibiting tPA-GFP-PAI-1 high-molecular-weight complex formation. TM5275 enhanced the time-dependent accumulation of plasminogen as well as the dissolution of fibrin clots on and around the tPA-GFP-expressing cells.

CONCLUSIONS

The profibrinolytic effects of TM5275 were clearly demonstrated by the prolongation of tPA retention and enhancement of plasmin generation on the VEC surface as a result of PAI-1 inhibition.

Studies on the effect of adenosine on calcium oscillation in hippocampal neurons

Adenosine (Ade) is an antiepileptic agent. In order to investigate the possible mechanism of action of Ade, its effect on calcium (Ca²⁺) oscillations in hippocampal neurons of Sprague Dawley (SD) rats was explored. Primary hippocampal neurons were cultured from suckling neonatal SD rats. Cells were cultured for 7–9 days and the Ca²⁺ oscillations in response to perfusion with Ade were detected using confocal laser scanning microscopy in combination with Fluo-3/AM labeling. This study found that Ade inhibits the spontaneous synchronized Ca²⁺ oscillation frequency and amplitude in mature hippocampal neurons and such inhibition depends on the Ade dosage level to a certain extent. Ade also had a significant inhibitory effect on high potassium-induced Ca²⁺ oscillation frequency and amplitude. Ade had a significant inhibitory effect on high-voltage-activated Ca²⁺ channel-mediated Ca²⁺ influx and Ca²⁺ oscillations in neurons. This may be one of the mechanisms for Ade to exert antiepileptic effects as an endogenous substance.

Nuclear translocation of nuclear factor Kappa B in first trimester deciduas and chorionic villi in early spontaneous miscarriage women

The nuclear factor kappa B is widely expressed in the distinct subpopulations of chorionic villi and deciduas of first-trimester pregnancies. We examined the cellular distribution and expression of nuclear factor kappa B in the human first-trimester chorionic villi and deciduas of women with early spontaneous miscarriage and viable pregnancy by confocal laser scanning microscope and immunohistochemistry. There is a greater nuclear translocation of nuclear factor kappa B is restricted to villous stromal cells, decidual stromal cells, glandular epithelial cells and vessel endothelial cells in early spontaneous miscarriage than in viable pregnancies. Collectively these observations suggest that over-activation of nuclear factor kappa B has a relationship with early spontaneous miscarriages.