Alterations in extracellular substances during the biofilm development of Pseudomonas aeruginosa on aluminum plates

In situ monitoring of Lentilactobacillus parabuchneri biofilm formation via real-time infrared spectroscopy

Foodborne pathogenic microorganisms form biofilms at abiotic surfaces, which is a particular challenge in food processing industries. The complexity of biofilm formation requires a fundamental understanding on the involved molecular mechanisms, which may then lead to efficient prevention strategies. In the present study, biogenic amine producing bacteria, i.e., Lentilactobacillus parabuchneri DSM 5987 strain isolated from cheese were studied in respect with biofilm formation, which is of substantial relevance given their contribution to the presence of histamine in dairy products. While scanning electron microscopy was used to investigate biofilm adhesion at stainless steel surfaces, in situ infrared attenuated total reflection spectroscopy (IR-ATR) using a custom flow-through assembly was used for real-time and non-destructive observations of biofilm formation during a period of several days. The spectral window of 1700–600 cm−1 provides access to vibrational signatures characteristic for identifying and tracking L. parabuchneri biofilm formation and maturation. Especially, the amide I and II bands, lactic acid produced as the biofilm matures, and a pronounced increase of bands characteristic for extracellular polymeric substances (EPS) provide molecular insight into biofilm formation, maturation, and changes in biofilm architecture. Finally, multivariate data evaluation strategies were applied facilitating the unambiguous classification of the observed biofilm changes via IR spectroscopic data.

On the role of extracellular polymeric substances during early stages of Xylella fastidiosa biofilm formation

The structural integrity and protection of bacterial biofilms are intrinsically associated with a matrix of extracellular polymeric substances (EPS) produced by the bacteria cells. However, the role of these substances during biofilm adhesion to a surface remains largely unclear. In this study, the influence of EPS on Xylella fastidiosa biofilm formation was investigated. This bacterium is associated with economically important plant diseases; it presents a slow growth rate and thus allows us to pinpoint more precisely the early stages of cell-surface adhesion. Scanning electron microscopy and atomic force microscopy show evidence of EPS production in such early stages and around individual bacteria cells attached to the substrate surface even a few hours after inoculation. In addition, EPS formation was investigated via attenuated total reflectance (ATR) Fourier transform infrared spectroscopy (FTIR). To this end, X. fastidiosa cells were inoculated within an ATR liquid cell assembly. IR-ATR spectra clearly reveal EPS formation already during the early stages of X. fastidiosa biofilm formation, thereby providing supporting evidence for the hypothesis of the relevance of the EPS contribution to the adhesion process.

Bacteria attachment to surfaces--AFM force spectroscopy and physicochemical analyses

Understanding bacterial adhesion to surfaces requires knowledge of the forces that govern bacterial-surface interactions. Biofilm formation on stainless steel 316 (SS316) by three bacterial species was investigated by examining surface force interaction between the cells and metal surface using atomic force microscopy (AFM). Bacterial-metal adhesion force was quantified at different surface delay time from 0 to 60s using AFM tip coated with three different bacterial species: Gram-negative Massilia timonae and Pseudomonas aeruginosa, and Gram-positive Bacillus subtilis. The results revealed that bacterial adhesion forces on SS316 surface by Gram-negative bacteria is higher (8.53±1.40 nN and 7.88±0.94 nN) when compared to Gram-positive bacteria (1.44±0.21 nN). Physicochemical analysis on bacterial surface properties also revealed that M. timonae and P. aeruginosa showed higher hydrophobicity and surface charges than B. subtilis along with the capability of producing extracellular polymeric substances (EPS). The higher hydrophobicity, surface charges, and greater propensity to form EPS by M. timonae and P. aeruginosa led to high adhesive force on the metal surface.

Antimicrobial activity and effectiveness of a combination of sodium hypochlorite and hydrogen peroxide in killing and removing Pseudomonas aeruginosa biofilms from surfaces

AIMS

To evaluate both the antimicrobial activity and the effectiveness of a combination of sodium hypochlorite and hydrogen peroxide (Ox-B) for killing Pseudomonas aeruginosa ATCC 19142 cells and removing P. aeruginosa biofilms on aluminum or stainless steel surfaces.

METHODS AND RESULTS

Pseudomonas aeruginosa biofilms were developed in tryptic soy broth containing vertically suspended aluminium or stainless steel plates. Biofilms were exposed to a mixed sodium hypochlorite and hydrogen peroxide solution as a sanitizer for 1, 5 and 20 min. The sanitizer was then neutralized, the cells dislodged from the test surfaces, and viable cells enumerated. Cell morphologies were determined using scanning (SEM) and transmission electron microscopy (TEM). Cell viability was determined by confocal scanning laser microscopy (CSLM). Biofilm removal was monitored by Fourier transform infrared (FTIR) spectrophotometry. Cell numbers were reduced by 5-log to 6-log after 1 min exposure and by 7-log after 5 min exposure to Ox-B. No viable cells were detected after a 20 min exposure. Treatment with equivalent concentrations of sodium hypochlorite reduced viable numbers by 3-log to 4-log after 1 min exposure and by 4-log to 6-log after 5 min, respectively. A 20 min exposure achieved a 7-log reduction. Hydrogen peroxide at test concentration treatments showed no effect. FTIR analysis of treated pseudomonad biofilms on aluminium or stainless steel plates showed either a significant reduction or complete removal of biofilm material after a 5 min exposure to the mixed sodium hypochlorite and hydrogen peroxide solution. SEM and TEM images revealed damage to cell wall and cell membranes.

CONCLUSIONS

A combination of sodium hypochlorite and hydrogen peroxide effectively killed P. aeruginosa cells and removed biofilms from both stainless steel and aluminium surfaces.

SIGNIFICANCE AND IMPACT OF THE STUDY

The combination of sodium hypochlorite and hydrogen peroxide can be used as an alternative disinfectant and/or biofilm remover of contaminated food processing equipment.

In situ monitoring of the nascent Pseudomonas fluorescens biofilm response to variations in the dissolved organic carbon level in low-nutrient water by attenuated total reflectance-Fourier transform infrared spectroscopy

Drinking water quality management requires early warning tools which enable water supply companies to detect quickly and to forecast degradation of the microbial quality of drinking water during its transport throughout distribution systems. This study evaluated the feasibility of assessing, in real time, drinking water biostability by monitoring in situ the evolution of the attenuated total reflectance-Fourier transform infrared (ATR-FTIR) fingerprint of a nascent reference biofilm exposed to water being tested. For this purpose, the responses of nascent Pseudomonas fluorescens biofilms to variations in the dissolved organic carbon (DOC) level in tap water were monitored in situ and in real time by ATR-FTIR spectroscopy. Nascent P. fluorescens biofilms consisting of a monolayer of bacteria were formed on the germanium crystal of an ATR flowthrough cell by pumping bacterial suspensions in Luria-Bertani (LB) medium through the cell. Then they were exposed to a continuous flow of dechlorinated sterile tap water supplemented with appropriate amounts of sterile LB medium to obtain DOC concentrations ranging from 1.5 to 11.8 mg/liter. The time evolution of infrared bands related to proteins, polysaccharides, and nucleic acids clearly showed that changes in the DOC concentration resulted in changes in the nascent biofilm ATR-FTIR fingerprint within 2 h after exposure of the biofilm to the water being tested. The initial bacterial attachment, biofilm detachment, and regrowth kinetics determined from changes in the areas of bands associated with proteins and polysaccharides were directly dependent on the DOC level. Furthermore, they were consistent with bacterial adhesion or growth kinetic models and extracellular polymeric substance overproduction or starvation-dependent detachment mechanisms.

Morphological and chemical changes in the attached cells of Pseudomonas aeruginosa as primary biofilms develop on aluminium and CaF2 plates

AIMS

To investigate the morphological and chemical changes in attached cells of Pseudomonas aeruginosa (ATCC 14886) at different stages of biofilm development on two different types of substrata.

METHODS AND RESULTS

The development of primary biofilm on aluminium plates representing metals and on CaF(2) discs representing dielectric materials was monitored by FTIR microscopy, ESEM, EDAX and protein analysis by SDS-PAGE. A unique cellular feature similar in morphology to pili was observed on the surface of P. aeruginosa adhering on aluminium but not on CaF(2). Results derived from FTIR analysis confirm on both substrata the successive importance of polysaccharides and proteins during the biofilm development. These results also revealed that the increase of the ratio of carboxylates to amide I was higher with the aluminium plates than with the CaF(2) discs. The number of cells adhered and the amount of oxygen incorporated in adhered cells on the latter materials were, respectively, less and almost nil in comparison with the former. Protein analysis of the lysates of cells by SDS-PAGE revealed that expression of one protein with a molecular weight of 45 kDa, was greatly enhanced in attached cells on both substrata. However, expression of another protein with molecular weight of 35 kDa was up-regulated only in cells adhering on CaF(2) but not in those on aluminium.

CONCLUSION

Depending on the nature of the surface, new proteinaceous complexes and cellular features were formed in the attachment process of P. aeruginosa.

SIGNIFICANCE AND IMPACT OF THE STUDY

The pattern of P. aeruginosa cells adhering onto CaF(2) discs and aluminium plates is different. Formation of biofilm is more difficult on CaF(2) than on aluminium.

Polysaccharide differences between planktonic and biofilm-associated EPS from Pseudomonas fluorescens B52

The polysaccharides associated with free (planktonic) and surface-attached (biofilm) cells from cultures of Pseudomonas fluorescens strain B52 were compared. Variations in the attached matrix due to surface material (glass or stainless steel) were also analyzed. Two digestion methods were used to optimize the recoveries of sugars, uronic acids and acidic substituents. The yield of analyzable material after digestion reached 90% for the material associated to the biofilms, though only 20-30% for that bound to planktonic cells. The polysaccharide(s) in the biofilm had glucuronic and guluronic acids as main components, besides rhamnose, glucose and glucosamine. The proportion of glucuronic to guluronic acid was higher in the polysaccharide(s) found in biofilms formed on stainless steel than in those on glass.

Production of extracellular polymeric substances from Rhodopseudomonas acidophila in the presence of toxic substances

A hydrogen-producing photosynthetic bacteria strain, Rhodopseudomonas acidophila, was used to investigate the production of extracellular polymeric substances (EPS) in the presence of toxic substances and the effect of toxicants on bacterial surface characteristics. Addition of the toxic substances including Cu(II), Cr(VI), Cd(II) and 2,4-dichlorophenol (2,4-DCP) stimulated the production of EPS but reduced the cell dry weight. At concentrations of 30 mg l(-1) Cu(II), 40 mg l(-1) Cr(VI), 5 mg l(-1) Cd(II) and 100 mg l(-1) 2,4-DCP, the EPS content increased by 5.5, 2.5, 4.0 and 1.4 times, respectively, than the control. These toxic substances also greatly influenced the proteins/carbohydrates ratio of EPS. The ratios in the presence of toxic substances were always higher than that of control. Furthermore, under toxic conditions, the increase in the protein content far exceeded than that of others in EPS, suggesting that extracellular proteins could protect cells against toxic substances. The toxic substances significantly changed the surface characteristics and flocculation ability of R. acidophila, such as surface energy, relative hydrophobicity and free energy of adhesion.