Moulded photoplastic probes for near-field optical applications

Plasmonic Functionality of Optical Fiber Tips: Mechanisms, Fabrications, and Applications

Optical fiber tips with the flat end-facets functionalized take the special advantages of easy fabrication, compactness, and ready-integration among the community of optical fiber devices. Combined with plasmonic structures, the fiber tips draw a significant growth of interest addressing diverse functions. This review aims to present and summarize the plasmonic functionality of optical fiber tips with the current state of the art. Firstly, the mechanisms of plasmonic phenomena are introduced in order to illustrate the tip-compatible plasmonic nanostructures. Then, the strategies of plasmonic functionalities on fiber tips are analyzed and compared. Moreover, the classical applications of plasmonic fiber tips are reviewed. Finally, the challenges and prospects for future opportunities are discussed.

Numerical investigation of a light delivery device using metal/insulator/metal with a 3D linear taper waveguide and an input grating for heat-assisted magnetic recording

Heat-assisted magnetic recording (HAMR), a new technique to overcome the data-density limitation, uses a laser to temporarily heat a nanovolume of a recording medium. Thus, this paper proposes a light delivery device that uses the metal/insulator/metal waveguide with a three-dimensional linear taper, and a grating added for an input, for HAMR. Our structure was calculated by finite-element method simulation. By design, 830 nm of light was delivered into a 50nm² spot area with 63% coupling efficiency, and power intensity was enhanced 930 times. This achievement potential could be applied to the HAMR system in the future.

Size-Reduction Template Stripping of Smooth Curved Metallic Tips for Adiabatic Nanofocusing of Surface Plasmons

We present a new technique to engineer metallic interfaces to produce sharp tips with smooth curved surfaces and variable tip angles, as well as ridges with arbitrary contour shapes, all of which can be integrated with grating couplers for applications in plasmonics and nanophotonics. We combine template stripping, a nanofabrication scheme, with atomic layer deposition (ALD) to produce the ultrasharp nanoscale tips and wedges using only conventional photolithography. Conformal ALD coating of insulators over silicon trench molds of various shapes reduces their widths to make nanoscale features without high-resolution lithography. Along with a metal deposition and template stripping, this size-reduction scheme can mass-produce narrow and ultrasharp (<10 nm radius of curvature) metallic wedges and tips over an entire 4 in. wafer. This size-reduction scheme can create metallic tips out of arbitrary trench patterns that have smooth curved surfaces to facilitate efficient adiabatic nanofocusing which will benefit applications in near-field optical spectroscopy, plasmonic waveguides, particle trapping, hot-electron plasmonics, and nonlinear optics.

Smart design of fiber optic surfaces for improved plasmonic biosensing

Although the phenomenon of surface plasmon resonance (SPR) is known for more than a century now, traditional prism-based SPR platforms have hardly escaped the research laboratories despite being recognized for the sensitive and specific performance. Significant efforts have been made over the last years to overcome their existing limitations by coupling the SPR phenomenon to the fiber optic (FO) technology. While this platform has been promoted as cost-effective and simpler alternative capable of handling label-free bioassays, quantification and real-time monitoring of biomolecular interactions, examples of its applicability in sensing and biosensing remain to date very limited. The FO-SPR system is still in development and requires further advancements for reaching the stability and sensitivity of the benchmark SPR systems. Among existing strategies for device improvement, those based on modifying the FO tips using nanomaterials are mostly studied. These small-scale objects provide a wide range of possibilities for alternating the architecture of the FO sensitive zone, enabling also unique effects such as localized SPR (LSPR). This mini-review summarizes the latest innovations in the fabrication procedures which use nanoparticles or other nanomaterials, aiming at FO-SPR technology performance improvements, as well as addition of new device features and functionalities.

The optical fiber tip: an inherently light-coupled microscopic platform for micro- and nanotechnologies

The flat tip of an optical fiber is a unique and unconventional platform for micro and nanotechnologies. The small cross-section and large aspect ratio of the fiber provide an inherently light-coupled substrate that is uniquely suited to remote, in vivo and in situ applications. However, these same characteristics challenge established fabrication technologies, which are best suited to large planar substrates. This review presents a broad overview of strategies for patterning the flat tip of an optical fiber. Techniques discussed include self-assembly, numerous lithographies, through-fiber patterning, hybrid techniques, and strategies for mass manufacture, while the diverse applications are discussed in context throughout.

Recent progress of nano-technology with NSOM

Recent progress of nano-technology with near-field scanning optical microscope (NSOM) is surveyed in this article. We focus mainly on NSOM, nano-scale spectroscopy with NSOM, probe technology of NSOM, and study of nano-structured metallic surface with NSOM. First, we follow developments of aperture NSOM and apertureless NSOM, and then address progress of NSOM-combined spectroscopy which is so sufficiently advanced with apertureless NSOM technology to provide chemical information on length scales of a few nanometers. Recent achievement of nano-scale Raman and IR spectroscopy will be introduced. Finally, research on nano-optic elements using surface plasmon polariton with NSOM is introduced as an example of NSOM applications to nano-structured metallic surfaces.

Fabrication of near-field optical apertures in aluminium by a highly selective corrosion process in the evanescent field

A simple, one-step process to fabricate high-quality apertures for scanning near-field optical microscope probes based on aluminium-coated silicon nitride cantilevers is presented. A thin evanescent optical field at a glass-water interface was used to heat the aluminium at the tip apex due to light absorption. The heat induced a breakdown of the passivating oxide layer and local corrosion of the metal, which selectively exposed the front-most part of the probe tip from the aluminium. Apertures with a protruding silicon nitride tip up to 72 nm in height were fabricated. The height of the protrusion was controlled by the extent of the evanescent field, whereas the diameter depended on the geometry of the probe substrate. The corrosion process proved to be self-terminating, yielding highly reproducible tip heights. Near-field optical resolution in a transmission mode of 85 nm was demonstrated.

Photoplastic near-field optical probe with sub-100 nm aperture made by replication from a nanomould

Polymers have the ability to conform to surface contours down to a few nanometres. We studied the filling of transparent epoxy-type EPON SU-8 into nanoscale apertures made in a thin metal film as a new method for polymer/metal near-field optical structures. Mould replica processes combining silicon micromachining with the photo-curable SU-8 offer great potential for low-cost nanostructure fabrication. In addition to offering a route for mass production, the transparent pyramidal probes are expected to improve light transmission thanks to a wider geometry near the aperture. By combining silicon MEMS, mould geometry tuning by oxidation, anti-adhesion coating by self-assembled monolayer and mechanical release steps, we propose an advanced method for near-field optical probe fabrication. The major improvement is the possibility to fabricate nanoscale apertures directly on wafer scale during the microfabrication process and not on free-standing tips. Optical measurements were performed with the fabricated probes. The full width half maximum after a Gaussian fit of the intensity profile indicates a lateral optical resolution of approximately 60 nm.

Fabrication and characterization of a silicon cantilever probe with an integrated quartz-glass (fused-silica) tip for scanning near-field optical microscopy

A cantilever-based probe is introduced for use in scanning near-field optical microscopy (SNOM) combined with scanning atomic-force microscopy (AFM). The probes consist of silicon cantilevers with integrated 25-mum-high fused-silica tips. The probes are batch fabricated by microfabrication technology. Transmission electron microscopy reveals that the transparent quartz tips are completely covered with an opaque aluminum layer before the SNOM measurement. Static and dynamic AFM imaging was performed. SNOM imaging in transmission mode of single fluorescent molecules shows an optical resolution better than 32 nm.