Conformational features of crystal-surface cellulose from higher plants

Highly efficient room temperature grafting polymerization of cellulose for the synthesis of cellulose-g-polypeptide biological macromolecules

Cellulose, a widely abundant polysaccharide, constitutes over 50 % of the carbon content in the plant kingdom. The grafting polymerization of cellulose is a specialized technique that can significantly enhances the utility of this biopolymer. However, conventional polymerization methods for cellulose grafting, such as radical polymerizations of vinyl compounds and ring-opening polymerizations (ROPs) of cyclic esters, often require harsh conditions, including elevated temperatures and the use of metal complexes, strong bases, or strong acids as catalysts. This study aims to develop a highly efficient room temperature grafting polymerization method for cellulose modification, utilizing organocatalytic ring-opening polymerization (ROP) of α-amino acid N-carboxyanhydrides (NCAs). In contrast to traditional polymerization techniques, the ROP of NCAs demonstrates high activity and selectivity at ambient temperature. A diverse array of cellulose-graft-polypeptide copolymers was successfully synthesized under mild conditions using various cellulose substrates, including hydroxyethyl cellulose (HEC), microcrystalline cellulose (MCC), and cellulose paper. The integration of cellulose with polypeptides that exhibit structural similarities to natural peptides and proteins can enhance the biodegradability and biocompatibility of cellulose, broadening its potential applications in the life sciences sector.

An alternate route for cellulose microfibril biosynthesis in plants

Similar to cellulose synthases (CESAs), cellulose synthase-like D (CSLD) proteins synthesize β-1,4-glucan in plants. CSLDs are important for tip growth and cytokinesis, but it was unknown whether they form membrane complexes in vivo or produce microfibrillar cellulose. We produced viable CESA-deficient mutants of the moss Physcomitrium patens to investigate CSLD function without interfering CESA activity. Microscopy and spectroscopy showed that CESA-deficient mutants synthesize cellulose microfibrils that are indistinguishable from those in vascular plants. Correspondingly, freeze-fracture electron microscopy revealed rosette-shaped particle assemblies in the plasma membrane that are indistinguishable from CESA-containing rosette cellulose synthesis complexes (CSCs). Our data show that proteins other than CESAs, most likely CSLDs, produce cellulose microfibrils in P. patens protonemal filaments. The data suggest that the specialized roles of CSLDs in cytokinesis and tip growth are based on differential expression and different interactions with microtubules and possibly Ca2+, rather than structural differences in the microfibrils they produce.

Are cellulases slow? Kinetic and thermodynamic limitations for enzymatic breakdown of cellulose

Cellulases are of paramount interest for upcoming biorefineries that utilize residue from agriculture and forestry to produce sustainable fuels and chemicals. Specifically, cellulases are used for the conversion of recalcitrant plant biomass to fermentable sugars in a so-called saccharification process. The vast literature on enzymatic saccharification frequently refers to low catalytic rates of cellulases as a main bottleneck for industrial implementation, but such statements are rarely supported by kinetic or thermodynamic considerations. In this perspective, we first discuss activation barriers and equilibrium conditions for the hydrolysis of cellulose and how these parameters influence enzymatic turnover. Next, we propose a simple framework for kinetic description of cellulolytic enzyme reactions and show how this can pave the way for comparative biochemical analyses of cellulases acting on their native, insoluble substrate. This latter analysis emphasizes that cellulases are characterized by extraordinarily low off-rate constants, while other kinetic parameters including specificity constants and rate constants for association and bond cleavage are quite like parameters reported for related enzymes acting on soluble substrates.

How Many Glucan Chains Form Plant Cellulose Microfibrils? A Mini Review

Assessing the number of glucan chains in cellulose microfibrils (CMFs) is crucial for understanding their structure-property relationships and interactions within plant cell walls. This Review examines the conclusions and limitations of the major experimental techniques that have provided insights into this question. Small-angle X-ray and neutron scattering data predominantly support an 18-chain model, although analysis is complicated by factors such as fibril coalescence and matrix polysaccharide associations. Solid-state nuclear magnetic resonance (NMR) spectroscopy allows the estimation of the CMF width from the ratio of interior to surface glucose residues. However, there is uncertainty in the assignment of NMR spectral peaks to surface or interior chains. Freeze-fracture transmission electron microscopy images show cellulose synthase complexes to be "rosettes" of six lobes each consistent with a trimer of cellulose synthase enzymes, consistent with the synthesis of 18 parallel glucan chains in the CMF. Nevertheless, the number of chains in CMFs remains to be conclusively demonstrated.

Enzymatic approaches for diversifying bioproducts from cellulosic biomass

Cellulosic biomass is the most abundantly available natural carbon-based renewable resource on Earth. Its widespread availability, combined with rising awareness, evolving policies, and changing regulations supporting sustainable practices, has propelled its role as a crucial renewable feedstock to meet the escalating demand for eco-friendly and renewable materials, chemicals, and fuels. Initially, biorefinery models using cellulosic biomass had focused on single-product platform, primarily monomeric sugars for biofuel. However, since the launch of the first pioneering cellulosic plants in 2014, these models have undergone significant revisions to adapt their biomass upgrading strategy. These changes aim to diversify the bioproduct portfolio and improve the revenue streams of cellulosic biomass biorefineries. Within this area of research and development, enzyme-based technologies can play a significant role by contributing to eco-design in producing and creating innovative bioproducts. This Feature Article highlights our strategies and recent progress in utilizing the biological diversity and inherent selectivity of enzymes to develop and continuously optimize sustainable enzyme-based technologies with distinct application approaches. We have advanced technologies for standalone platforms, which produce various forms of cellulose nanomaterials engineered with customized and enhanced properties and high yields. Additionally, we have tailored technologies for integration within a biorefinery concept. This biorefinery approach prioritizes designing tailored processes to establish bionanomaterials, such as cellulose and lignin nanoparticles, and bioactive molecules as part of a new multi-bioproduct platform for cellulosic biomass biorefineries. These innovations expand the range of bioproducts that can be produced from cellulosic biomass, transcending the conventional focus on monomeric sugars for biofuel production to include biomaterials biorefinery. This shift thereby contributes to strengthening the Bioeconomy strategy and supporting the achievement of several Sustainable Development Goals (SDGs) of the 2030 Agenda for Sustainable Development.

Elucidation of temperature-induced water structuring on cellulose surfaces for environmental and energy sustainability

Optimizing drying energy in the forest products industry is critical for integrating lignocellulosic feedstocks across all manufacturing sectors. Despite substantial efforts to reduce thermal energy consumption during drying, further enhancements are possible. Cellulose, the main component of forest products, is Earth's most abundant biopolymer and a promising renewable feedstock. This study employs all-atom molecular dynamics (MD) simulations to explore the structural dynamics of a small Iβ-cellulose microcrystallite and surrounding water layers during drying. Molecular and atomistic profiles revealed localized water near the cellulose surface, with water structuring extending beyond 8 Å into the water bulk, influencing solvent-accessible surface area and solvation energy. With increasing temperature, there was a ∼20 % reduction in the cellulose surface available for interaction with water molecules, and a ∼22 % reduction in solvation energy. The number of hydrogen bonds increased with thicker water layers, facilitated by a "bridging" effect. Electrostatic interactions dominated the intermolecular interactions at all temperatures, creating an energetic barrier that hinders water removal, slowing the drying processes. Understanding temperature-dependent cellulose-water interactions at the molecular level will help in designing novel strategies to address drying energy consumption, advancing the adoption of lignocellulosics as viable manufacturing feedstocks.

Glycosyl hydrolases family 5, subfamily 5: Relevance and structural insights for designing improved biomass degrading cocktails

Endoglucanases are carbohydrate-degrading enzymes widely used for bioethanol production as part of the enzymatic cocktail. However, family 5 subfamily 5 (GH5_5) endoglucanases are still poorly explored in depth. The Trichoderma reesei representative is the most studied enzyme, presenting catalytic activity in acidic media and mild temperature conditions. Though biochemically similar, its modular structure and synergy with other components vary greatly compared to other GH5_5 members and there is still a lack of specific studies regarding their interaction with other cellulases and application on novel and better mixtures. In this regard, the threedimensional structure elucidation is a highly valuable tool to both uncover basic catalytic mechanisms and implement engineering techniques, proved by the high success rate GH5_5 endoglucanases show. GH5_5 enzymes must be carefully evaluated to fully uncover their potential in biomass-degrading cocktails: the optimal industrial conditions, synergy with other cellulases, structural studies, and enzyme engineering approaches. We aimed to provide the current understanding of these main topics, collecting all available information about characterized GH5_5 endoglucanases function, structure, and bench experiments, in order to suggest future directions to a better application of these enzymes in the industry.

Combining Computational Chemistry and Crystallography for a Better Understanding of the Structure of Cellulose

The approaches in this article seek to enhance understanding of cellulose at the molecular level, independent of the source and the particular crystalline form of cellulose. Four main areas of structure research are reviewed. Initially, the molecular shape is inferred from the crystal structures of many small molecules that have β-(1→4) linkages. Then, conformational analyses with potential energy calculations of cellobiose are covered, followed by the use of Atoms-In-Molecules theory to learn about interactions in experimental and theoretical structures. The last section covers models of cellulose nanoparticles. Controversies addressed include the stability of twofold screw-axis conformations, the influence of different computational methods, the predictability of crystalline conformations by studies of isolated molecules, and the twisting of model cellulose crystals.

On cellulose spatial organization and interactions as unraveled by diffraction and spectroscopic methods throughout the 20th century

This contribution attempts to describe the path towards determination of cellulose crystal structure down to atomic coordinates, towards the determination of its molecular conformation, as well as towards the details of the intricate pattern of hydrogen bonds and their dynamics. This path started at the beginning of the 20th century with X-ray diffraction, continued with electron diffraction, infrared and Raman spectroscopy, and significant knowledge was gained by methods of NMR spectroscopy. Towards the end of the 20th century and at the beginning of the 21st century, X-ray diffraction in conjunction with neutron diffraction provided the position of hydrogens, which led to detailed description of the geometry of hydrogen bonding network in cellulose. Quantum chemical and molecular dynamics calculations, polarized infrared spectroscopy and sum frequency generation vibrational spectroscopy were used to identify the origins of the vibrational modes in cellulose and to describe their extensive coupling mediated by hydrogen bonds. The role of amphiphilic character of cellulose macromolecule (and consequent hydrophobic interactions) in cellulose properties and behavior has been gaining more recognition in the 21st century.

Identifying the origin of local flexibility in a carbohydrate polymer

The monomer sequence dictates the structure and properties of natural polymers. Such a structure–property relationship is well known for polypeptides and polynucleotides but not for polysaccharides, the most abundant biopolymers on Earth. Here, we establish the structure–property relationship for a polysaccharide at the atomic level by determining molecular flexibility of carbohydrate chains with defined sequences. The chain flexibility can be engineered one linkage at a time by chemical substitution and conformation change, highlighting how the primary and secondary structures of a carbohydrate dictate its flexibility—a critical observable in the de novo design of carbohydrate materials. Our approach can be extended to establish the structure–property relationship at the atomic level of any molecule that can be electrosprayed.

Correlating the structures and properties of a polymer to its monomer sequence is key to understanding how its higher hierarchy structures are formed and how its macroscopic material properties emerge. Carbohydrate polymers, such as cellulose and chitin, are the most abundant materials found in nature whose structures and properties have been characterized only at the submicrometer level. Here, by imaging single-cellulose chains at the nanoscale, we determine the structure and local flexibility of cellulose as a function of its sequence (primary structure) and conformation (secondary structure). Changing the primary structure by chemical substitutions and geometrical variations in the secondary structure allow the chain flexibility to be engineered at the single-linkage level. Tuning local flexibility opens opportunities for the bottom-up design of carbohydrate materials.

Faster magic angle spinning reveals cellulose conformations in woods

We present a first report on the detection of three different C6 conformers of cellulose in spruce, as revealed by solid-state 1H-13C correlation spectra. The breakthrough in 1H resolution is achieved by magic-angle spinning in the regime of 150 kHz. The suppression of dense dipolar network of 1H provides inverse detected 13C spectra at a good sensitivity even in natural samples. We find that the glycosidic linkages are initially more ordered in spruce than maple, but a thermal treatment of spruce leads to a more heterogeneous packing order of the remaining cellulose fibrils.

Comparison of cellooligosaccharide conformations in complexes with proteins with energy maps for cellobiose

Shapes (conformations) of cellulose molecules are described by their glycosidic linkage torsion angles ϕ and ψ. Although the torsions are known for cellulose in crystals, amorphous shapes are also interesting for understanding reactivity and physical properties. ϕ and ψ determination for unorganized matter is difficult; one approach is to study their range in many related molecules. For example, linkage torsions of cellulose should be similar to those in cellobiose. Herein, torsions were measured for cellooligosaccharides and lactose moieties complexed with proteins in the Protein Data Bank (PDB). These torsions were compared with ϕ/ψ maps based on quantum mechanics energies for solvated cellobiose and analogs lacking hydroxyl groups. Most PDB conformations corresponded to low map energies. Amorphous cellulose should be generally extended with individual linkages that would give 2- to 3-fold helices. The map for an analog lacking hydrogen bonding ability was more predictive for PDB linkages than the cellobiose map.

Rearrangement of the Cellulose-Enriched Cell Wall in Flax Phloem Fibers over the Course of the Gravitropic Reaction

The plant cell wall is a complex structure consisting of a polysaccharide network. The rearrangements of the cell wall during the various physiological reactions of plants, however, are still not fully characterized. Profound changes in cell wall organization are detected by microscopy in the phloem fibers of flax (Linum usitatissimum) during the restoration of the vertical position of the inclined stems. To characterize the underlying biochemical and structural changes in the major cell wall polysaccharides, we compared the fiber cell walls of non-inclined and gravistimulated plants by focusing mainly on differences in non-cellulosic polysaccharides and the fine cellulose structure. Biochemical analysis revealed a slight increase in the content of pectins in the fiber cell walls of gravistimulated plants as well as an increase in accessibility for labeling non-cellulosic polysaccharides. The presence of galactosylated xyloglucan in the gelatinous cell wall layer of flax fibers was demonstrated, and its labeling was more pronounced in the gravistimulated plants. Using solid state NMR, an increase in the crystallinity of the cellulose in gravistimulated plants, along with a decrease in cellulose mobility, was demonstrated. Thus, gravistimulation may affect the rearrangement of the cell wall, which can enable restoration in a vertical position of the plant stem.

Cellulose–water system’s state analysis by proton nuclear magnetic resonance and sorption measurements

Most cellulose-based materials’ manufacturing processes include processing this biopolymer in an aqueous medium. Sorption properties depend on cellulose supramolecular structure and nature of its change during moistening. Plenty of researchers’ efforts have been directed to the development of scientifically sound and commercially reliable processes over the past decade for the cellulose fibers’ dispersion in an aqueous medium. Therefore, it needs a more detailed study of the cellulose–water system components’ interaction. This study presents the supramolecular structure and sorption properties of native cotton cellulose research results obtained by 1H NMR relaxation, spectroscopy and sorption measurements. Hydrophilic properties of cellulose as an adsorbent are characterized, taking into account a porous system between its structural elements. We examine in detail water adsorption on the active surface of cellulose Iβ. We also demonstrate the approach for determining the entropy change in the first two layers of adsorbed water and estimate this value increased during adsorption. Cellulose moistening is accompanied by the decomposition of macrofibrils into microfibrils and is manifested in a crystallinity decrease and a specific surface area growth.

Changes to the Contour Length, Molecular Chain Length, and Solid-State Structures of Nanocellulose Resulting from Sonication in Water

Sonication in water reduced the average contour lengths of nanocellulose prepared from wood cellulose fiber and microcrystalline cellulose. Most of the kinks in the wood cellulose nanofibrils were formed during the initial 10 min of sonication. Fragmentation occurred at the kinks and rigid segments associated with depolymerization during subsequent sonication for 10-120 min, resulting in the formation of cellulose nanocrystals with low aspect ratios. Solid-state cross-polarization magic angle sample spinning ¹³C-nuclear magnetic resonance revealed that the original crystalline regions of the cellulose were partly transformed to fibril surfaces or disordered regions by both pretreatment and the subsequent fragmentation of molecular chains during sonication. The nanocellulose prepared from microcrystalline cellulose had different fragmentation behavior with regard to molecular chain length following sonication. The results indicated that on average the hexagonal 36 cellulose chain structure formed the cross-section of each wood cellulose microfibril.

Nanofibrils vs nanocrystals bio-nanocomposites based on sodium alginate matrix: An improved-performance study

To develop bio-nanocomposites using natural biopolymers, nanocomposite films were prepared based on sodium alginate and kapok nanofibrils (CNFs). CNFs when subjected to TEMPO-mediated oxidation gave rise to cellulose nanocrystals (TOCNCs), with carboxyl groups at the surface (Ka/Kb = 3.64). The differences between the two types of nanocelluloses (nanofibrils and nanocrystals) and their impact in the preparation of bio-nanocomposites, were studied. When incorporated in the matrix, the CNFs particles have the tendency to form surface aggregation (Ka/Kb = 2.37), distorting the alginate network, creating heterogeneous films, with high surface roughness (S_a = 29.37 nm), porosity (D_p = 0.087 cm²/min) and vulnerability to heat. The TOCNCs present good dispersion creating a 3D network, which forms uniform (D_p = 0.122 cm²/min) and homogeneous films, with smooth surface (S_a = 16.83 nm). The ultrasonication treatment facilitated the dispersion improving the interfacial interaction between the reinforcing phase and the matrix. The results show the reinforcement potential of kapok nanocellulose in an industrially and medically important biopolymer, sodium alginate, especially when TOCNCs and ultrasonication were used.

Relationship of Distribution of Carboxy Groups to Molar Mass Distribution of TEMPO-Oxidized Algal, Cotton, and Wood Cellulose Nanofibrils

Distributions of carboxy groups among the molecules in 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibrils (TOCNs) prepared from wood, cotton, and algal celluloses were investigated. Most C6-carboxy groups in TOCNs were esterified with anthracene-methyl (-CH₂C₁₄H₉) groups, showing an ultraviolet light (UV) absorption peak at 365 nm. The anthracene-methylated TOCNs were dissolved in 8% (w/w) lithium chloride/N,N-dimethylacetamide (LiCl/DMAc). After dilution to 1% LiCl/DMAc, the solutions were subjected to size-exclusion chromatography with multiangle laser-light scattering, refractive index, and UV detection. For algal TOCN, C6-carboxy group-rich molecules were present predominantly in the low-molar-mass region, which was consistent with the core-clad cellulose chain packing structures in individual algal cellulose microfibrils and partial depolymerization of the oxidized cellulose molecules. In contrast, wood and cotton TOCNs had almost homogeneous distributions of C6-carboxy groups in all molar mass regions, which could not be explained in terms of the simple core-clad cellulose chain packing structures.

Distinct Substrate Specificities and Electron-Donating Systems of Fungal Lytic Polysaccharide Monooxygenases

Lytic polysaccharide monooxygenases (LPMOs) are powerful enzymes that oxidatively cleave glycosidic bonds in polysaccharides. The ability of these copper enzymes to boost the degradation of lignocellulose has greatly stimulated research efforts and biocatalytic applications within the biorefinery field. Initially found as oxidizing recalcitrant substrates, such as chitin and cellulose, it is now clear that LPMOs cleave a broad range of oligo- and poly-saccharides and make use of various electron-donating systems. Herein, substrate specificities and electron-donating systems of fungal LPMOs are summarized. A closer look at LPMOs as part of the fungal enzyme machinery might provide insights into their role in fungal growth and plant-pathogen interactions to further stimulate the search for novel LPMO applications.

Structure of native cellulose microfibrils, the starting point for nanocellulose manufacture

There is an emerging consensus that higher plants synthesize cellulose microfibrils that initially comprise 18 chains. However, the mean number of chains per microfibril in situ is usually greater than 18, sometimes much greater. Microfibrils from woody tissues of conifers, grasses and dicotyledonous plants, and from organs like cotton hairs, all differ in detailed structure and mean diameter. Diameters increase further when aggregated microfibrils are isolated. Because surface chains differ, the tensile properties of the cellulose may be augmented by increasing microfibril diameter. Association of microfibrils with anionic polysaccharides in primary cell walls and mucilages leads to in vivo mechanisms of disaggregation that may be relevant to the preparation of nanofibrillar cellulose products. For the preparation of nanocrystalline celluloses, the key issue is the nature and axial spacing of disordered domains at which axial scission can be initiated. These disordered domains do not, as has often been suggested, take the form of large blocks occupying much of the length of the microfibril. They are more likely to be located at chain ends or at places where the microfibril has been mechanically damaged, but their structure and the reasons for their sensitivity to acid hydrolysis need better characterization.This article is part of a discussion meeting issue 'New horizons for cellulose nanotechnology'.

Different Conformations of Surface Cellulose Molecules in Native Cellulose Microfibrils Revealed by Layer-by-Layer Peeling

Layer-by-layer peeling of surface molecules of native cellulose microfibrils was performed using a repeated sequential process of 2,2,6,6-tetramethylpiperidine-1-oxyl radical-mediated oxidation followed by hot alkali extraction. Both highly crystalline algal and tunicate celluloses and low-crystalline cotton and wood celluloses were investigated. Initially, the C6-hydroxy groups of the outermost surface molecules of each algal cellulose microfibril facing the exterior had the gauche-gauche (gg) conformation, whereas those facing the interior had the gauche-trans (gt) conformation. All the other C6-hydroxy groups of the cellulose molecules inside the microfibrils contributing to crystalline cellulose I had the trans-gauche (tg) conformation. After surface peeling, the originally second-layer molecules from the microfibril surface became the outermost surface molecules, and the original tg conformation changed to gg and gt conformations. The plant cellulose microfibrils likely had disordered structures for both the outermost surface and second-layer molecules, as demonstrated using the same layer-by-layer peeling technique.

Structure and Dynamics of Polysaccharides in Plant Cell Walls from Solid-State NMR

Multidimensional high-resolution magic-angle-spinning solid-state NMR (SSNMR) spectroscopy has recently been shown to have the unique capability of revealing the molecular structure and dynamics of insoluble macromolecules in intact plant cell walls. This chapter summarizes the 2D and 3D SSNMR techniques used so far to study cell walls and key findings about cellulose interactions with matrix polysaccharides, cellulose microfibril structure, polysaccharide–protein interactions that are responsible for wall loosening, and polysaccharide–water interactions in the hydrated primary walls. These results provide detailed molecular insights into the structure of near-native plant cell walls, and revise the conventional tethered-network model by suggesting a single-network model for the primary cell wall, which has found increasing support from recent biochemical and biomechanical data.

Discovery of Cellulose Surface Layer Conformation by Nonlinear Vibrational Spectroscopy

Significant questions remain in respect to cellulose’s structure and polymorphs, particularly the cellulose surface layers and the bulk crystalline core as well as the conformational differences. Total Internal Reflection Sum Frequency Generation Vibrational Spectroscopy (TIR-SFG-VS) combined with conventional SFG-VS (non-TIR) enables selectively characterizing the molecular structures of surface layers and the crystalline core of cellulose, revealing their differences for the first time. From the SFG spectra in the C-H and O-H regions, we found that the surface layers of Avicel are essentially amorphous while the surface layers of Iβ cellulose are crystalline but with different structural and spectroscopic signatures compared with its crystalline core. The differences between hydrogen bonding networks of cellulose surface and crystalline core were also shown by the SFG signal. The discovery here represents yet another instance of the importance of spectroscopic observations in transformative advances to understand the structure of the cellulosic biomass.

Cellulose Structural Polymorphism in Plant Primary Cell Walls Investigated by High-Field 2D Solid-State NMR Spectroscopy and Density Functional Theory Calculations

The native cellulose of bacterial, algal, and animal origins has been well studied structurally using X-ray and neutron diffraction and solid-state NMR spectroscopy, and is known to consist of varying proportions of two allomorphs, Iα and Iβ, which differ in hydrogen bonding, chain packing, and local conformation. In comparison, cellulose structure in plant primary cell walls is much less understood because plant cellulose has lower crystallinity and extensive interactions with matrix polysaccharides. Here we have combined two-dimensional magic-angle-spinning (MAS) solid-state nuclear magnetic resonance (solid-state NMR) spectroscopy at high magnetic fields with density functional theory (DFT) calculations to obtain detailed information about the structural polymorphism and spatial distributions of plant primary-wall cellulose. 2D (13)C-(13)C correlation spectra of uniformly (13)C-labeled cell walls of several model plants resolved seven sets of cellulose chemical shifts. Among these, five sets (denoted a-e) belong to cellulose in the interior of the microfibril while two sets (f and g) can be assigned to surface cellulose. Importantly, most of the interior cellulose (13)C chemical shifts differ significantly from the (13)C chemical shifts of the Iα and Iβ allomorphs, indicating that plant primary-wall cellulose has different conformations, packing, and hydrogen bonding from celluloses of other organisms. 2D (13)C-(13)C correlation experiments with long mixing times and with water polarization transfer revealed the spatial distributions and matrix-polysaccharide interactions of these cellulose structures. Celluloses f and g are well mixed chains on the microfibril surface, celluloses a and b are interior chains that are in molecular contact with the surface chains, while cellulose c resides in the core of the microfibril, outside spin diffusion contact with the surface. Interestingly, cellulose d, whose chemical shifts differ most significantly from those of bacterial, algal, and animal cellulose, interacts with hemicellulose, is poorly hydrated, and is targeted by the protein expansin during wall loosening. To obtain information about the C6 hydroxymethyl conformation of these plant celluloses, we carried out DFT calculations of (13)C chemical shifts, using the Iα and Iβ crystal structures as templates and varying the C5-C6 torsion angle. Comparison with the experimental chemical shifts suggests that all interior cellulose favor the tg conformation, but cellulose d also has a similar propensity to adopt the gt conformation. These results indicate that cellulose in plant primary cell walls, due to their interactions with matrix polysaccharides, and has polymorphic structures that are not a simple superposition of the Iα and Iβ allomorphs, thus distinguishing them from bacterial and animal celluloses.

Solid-state NMR investigations of cellulose structure and interactions with matrix polysaccharides in plant primary cell walls

Until recently, the 3D architecture of plant cell walls was poorly understood due to the lack of high-resolution techniques for characterizing the molecular structure, dynamics, and intermolecular interactions of the wall polysaccharides in these insoluble biomolecular mixtures. We introduced multidimensional solid-state NMR (SSNMR) spectroscopy, coupled with (13)C labelling of whole plants, to determine the spatial arrangements of macromolecules in near-native plant cell walls. Here we review key evidence from 2D and 3D correlation NMR spectra that show relatively few cellulose-hemicellulose cross peaks but many cellulose-pectin cross peaks, indicating that cellulose microfibrils are not extensively coated by hemicellulose and all three major polysaccharides exist in a single network rather than two separate networks as previously proposed. The number of glucan chains in the primary-wall cellulose microfibrils has been under active debate recently. We show detailed analysis of quantitative (13)C SSNMR spectra of cellulose in various wild-type (WT) and mutant Arabidopsis and Brachypodium primary cell walls, which consistently indicate that primary-wall cellulose microfibrils contain at least 24 glucan chains.

Biomass recalcitrance: a multi-scale, multi-factor, and conversion-specific property

Recalcitrance of plant biomass to enzymatic hydrolysis for biofuel production is thought to be a property conferred by lignin or lignin-carbohydrate complexes. However, chemical catalytic and thermochemical conversion pathways, either alone or in combination with biochemical and fermentative pathways, now provide avenues to utilize lignin and to expand the product range beyond ethanol or butanol. To capture all of the carbon in renewable biomass, both lignin-derived aromatics and polysaccharide-derived sugars need to be transformed by catalysts to liquid hydrocarbons and high-value co-products. We offer a new definition of recalcitrance as those features of biomass which disproportionately increase energy requirements in conversion processes, increase the cost and complexity of operations in the biorefinery, and/or reduce the recovery of biomass carbon into desired products. The application of novel processing technologies applied to biomass reveal new determinants of recalcitrance that comprise a broad range of molecular, nanoscale, and macroscale factors. Sampling natural genetic diversity within a species, transgenic approaches, and synthetic biology approaches are all strategies that can be used to select biomass for reduced recalcitrance in various pretreatments and conversion pathways.

Unique aspects of the structure and dynamics of elementary Iβ cellulose microfibrils revealed by computational simulations

The question of how many chains an elementary cellulose microfibril contains is critical to understanding the molecular mechanism(s) of cellulose biosynthesis and regulation. Given the hexagonal nature of the cellulose synthase rosette, it is assumed that the number of chains must be a multiple of six. We present molecular dynamics simulations on three different models of Iβ cellulose microfibrils, 18, 24, and 36 chains, to investigate their structure and dynamics in a hydrated environment. The 36-chain model stays in a conformational space that is very similar to the initial crystalline phase, while the 18- and 24-chain models sample a conformational space different from the crystalline structure yet similar to conformations observed in recent high-temperature molecular dynamics simulations. Major differences in the conformations sampled between the different models result from changes to the tilt of chains in different layers, specifically a second stage of tilt, increased rotation about the O2-C2 dihedral, and a greater sampling of non-TG exocyclic conformations, particularly the GG conformation in center layers and GT conformation in solvent-exposed exocyclic groups. With a reinterpretation of nuclear magnetic resonance data, specifically for contributions made to the C6 peak, data from the simulations suggest that the 18- and 24-chain structures are more viable models for an elementary cellulose microfibril, which also correlates with recent scattering and diffraction experimental data. These data inform biochemical and molecular studies that must explain how a six-particle cellulose synthase complex rosette synthesizes microfibrils likely comprised of either 18 or 24 chains.

Probing the molecular architecture of Arabidopsis thaliana secondary cell walls using two- and three-dimensional (13)C solid state nuclear magnetic resonance spectroscopy

The plant secondary cell wall is a thickened polysaccharide and phenolic structure, providing mechanical strength to cells, particularly in woody tissues. It is the main feedstock for the developing bioenergy and green chemistry industries. Despite the role that molecular architecture (the arrangement of biopolymers relative to each other, and their conformations) plays in dictating biomass properties, such as recalcitrance to breakdown, it is poorly understood. Here, unprocessed dry (13)C-labeled stems from the model plant Arabidopsis thaliana were analyzed by a variety of (13)C solid state magic angle spinning nuclear magnetic resonance methods, such as one-dimensional cross-polarization and direct polarization, two-dimensional refocused INADEQUATE, RFDR, PDSD, and three-dimensional DARR, demonstrating their viability for the study of native polymer arrangements in intact secondary cell walls. All carbon sites of the two main glucose environments in cellulose (previously assigned to microfibril surface and interior residues) are clearly resolved, as are carbon sites of the other major components of the secondary cell wall: xylan and lignin. The xylan carbon 4 chemical shift is markedly different from that reported previously for solution or primary cell wall xylan, indicating significant changes in the helical conformation in these dried stems. Furthermore, the shift span indicates that xylan adopts a wide range of conformations in this material, with very little in the 31 conformation typical of xylan in solution. Additionally, spatial connections of noncarbohydrate species were observed with both cellulose peaks conventionally assigned as "surface" and as "interior" cellulose environments, raising questions about the origin of these two cellulose signals.

From cellulose fibrils to single chains: understanding cellulose dissolution in ionic liquids

Continued improvement on the structure of elementary fibrils, simulation of larger elementary fibrils and systematic work on the solution structure of cellulose in ILs are three interacting modules to unravel the mechanism of cellulose dissolution in ILs.

Surface modification of cellulose nanocrystals

Chemical modification of cellulose nanocrystals is an increasingly popular topic in the literature. This review analyses the type of cellulose nanocrystal modification reactions that have been published in the literature thus far and looks at the steps that have been taken towards analysing the products of the nanocrystal modifications. The main categories of reactions carried out on cellulose nanocrystals are oxidations, esterifications, amidations, carbamations and etherifications. More recently nucleophilic substitutions have been used to introduce more complex functionality to cellulose nanocrystals. Multi-step modifications are also considered. This review emphasizes quantification of modification at the nanocrystal surface in terms of degree of substitution and the validity of conclusions drawn from different analysis techniques in this area. The mechanisms of the modification reactions are presented and considered with respect to the effect on the outcome of the reactions. While great strides have been made in the quality of analytical data published in the field of cellulose nanocrystal modification, there is still vast scope for improvement, both in data quality and the quality of analysis of data. Given the difficulty of surface analysis, cross-checking of results from different analysis techniques is fundamental for the development of reliable cellulose nanocrystal modification techniques.

Structure and dynamics of Brachypodium primary cell wall polysaccharides from two-dimensional (13)C solid-state nuclear magnetic resonance spectroscopy

The polysaccharide structure and dynamics in the primary cell wall of the model grass Brachypodium distachyon are investigated for the first time using solid-state nuclear magnetic resonance (NMR). While both grass and non-grass cell walls contain cellulose as the main structural scaffold, the former contains xylan with arabinose and glucuronic acid substitutions as the main hemicellulose, with a small amount of xyloglucan (XyG) and pectins, while the latter contains XyG as the main hemicellulose and significant amounts of pectins. We labeled the Brachypodium cell wall with (13)C to allow two-dimensional (2D) (13)C correlation NMR experiments under magic-angle spinning. Well-resolved 2D spectra are obtained in which the (13)C signals of cellulose, glucuronoarabinoxylan (GAX), and other matrix polysaccharides can be assigned. The assigned (13)C chemical shifts indicate that there are a large number of arabinose and xylose linkages in the wall, and GAX is significantly branched at the developmental stage of 2 weeks. 2D (13)C-(13)C correlation spectra measured with long spin diffusion mixing times indicate that the branched GAX approaches cellulose microfibrils on the nanometer scale, contrary to the conventional model in which only unbranched GAX can bind cellulose. The GAX chains are highly dynamic, with average order parameters of ~0.4. Biexponential (13)C T1 and (1)H T1ρ relaxation indicates that there are two dynamically distinct domains in GAX: the more rigid domain may be responsible for cross-linking cellulose microfibrils, while the more mobile domain may fill the interfibrillar space. This dynamic heterogeneity is more pronounced than that of the non-grass hemicellulose, XyG, suggesting that GAX adopts the mixed characteristics of XyG and pectins. Moderate differences in cellulose rigidity are observed between the Brachypodium and Arabidopsis cell walls, suggesting different effects of the matrix polysaccharides on cellulose. These data provide the first molecular-level structural information about the three-dimensional organization of the polysaccharides in the grass primary wall.

A gel-state 2D-NMR method for plant cell wall profiling and analysis: a model study with the amorphous cellulose and xylan from ball-milled cotton linters

Amorphous cellulose and xylan structures were analyzed using high-resolution 2D-NMR, and the NMR data were obtained in a DMSO-d₆/pyridine-d₅ (4 : 1) solvent system.

Brittle Culm1, a COBRA-like protein, functions in cellulose assembly through binding cellulose microfibrils

Cellulose represents the most abundant biopolymer in nature and has great economic importance. Cellulose chains pack laterally into crystalline forms, stacking into a complicated crystallographic structure. However, the mechanism of cellulose crystallization is poorly understood. Here, via functional characterization, we report that Brittle Culm1 (BC1), a COBRA-like protein in rice, modifies cellulose crystallinity. BC1 was demonstrated to be a glycosylphosphatidylinositol (GPI) anchored protein and can be released into cell walls by removal of the GPI anchor. BC1 possesses a carbohydrate-binding module (CBM) at its N-terminus. In vitro binding assays showed that this CBM interacts specifically with crystalline cellulose, and several aromatic residues in this domain are essential for binding. It was further demonstrated that cell wall-localized BC1 via the CBM and GPI anchor is one functional form of BC1. X-ray diffraction (XRD) assays revealed that mutations in BC1 and knockdown of BC1 expression decrease the crystallite width of cellulose; overexpression of BC1 and the CBM-mutated BC1s caused varied crystallinity with results that were consistent with the in vitro binding assay. Moreover, interaction between the CBM and cellulose microfibrils was largely repressed when the cell wall residues were pre-stained with two cellulose dyes. Treating wild-type and bc1 seedlings with the dyes resulted in insensitive root growth responses in bc1 plants. Combined with the evidence that BC1 and three secondary wall cellulose synthases (CESAs) function in different steps of cellulose production as revealed by genetic analysis, we conclude that BC1 modulates cellulose assembly by interacting with cellulose and affecting microfibril crystallinity.

Cellulose is an important natural resource with great economic value. Plant cellulose packs laterally into a complicated crystallographic structure, which determines cellulose quality and commercial uses. However, the mechanism of cellulose crystallization is poorly understood. Here we report that Brittle Culm1 (BC1), a COBRA-like (COBL) protein of rice, modifies cellulose crystallinity. Although previous studies have indicated the involvement of COB and COBL proteins in cellulose biosynthesis, the underlying molecular basis for this remains elusive. We demonstrate that BC1 localizes to the cell-wall and functions in a process that is distinct from that of the three secondary wall cellulose synthases (CESAs). A carbohydrate-binding module (CBM) at the N-terminus of BC1 interacts specifically with crystalline cellulose and regulates microfibril crystallite size. We conclude that BC1 modulates cellulose structure by binding to cellulose and affecting microfibril crystallinity. These findings provide new insights into the mechanism of cellulose assembly and further our understanding of the roles of COB and COBLs in cell wall biogenesis.

Identifying multiple forms of lateral disorder in cellulose fibres

Many strong biological materials exist in the form of fibres that are partially crystalline but contain a substantial proportion of disordered domains, which contribute to the mechanical performance but result in broadening of the reflections in the diffraction patterns of such materials and make structure determination difficult. Where multiple forms of disorder are simultaneously present, many of the accepted ways of modelling the influence of disorder on a fibre diffraction pattern are inapplicable. Lateral disorder in cellulose fibrils of flax fibres was characterized by a multi-step approach. First, a scattering component derived from domains less uniformly oriented than the rest was isolated. A second scattering component giving rise to asymmetry in the radial profiles of the equatorial reflections was then quantified and subtracted. This component was associated with domains that could be related to the crystalline cellulose lattice, but with more variable and, on average, wider equatorial d spacings. A further partially oriented component with highly disordered lateral d spacings unrelated to any of the cellulose lattice dimensions was identified. This component may be derived from non-cellulosic polysaccharides. The remaining broadening was then separated into a contribution from disorder within the crystalline lattice, including known disorder in hydrogen bonding, and a Scherrer contribution from the microfibril diameter. The methods described are likely to find applications in the study of both natural and synthetic polymer fibres in which mechanical properties are influenced by disorder.

Structure of cellulose microfibrils in primary cell walls from collenchyma

In the primary walls of growing plant cells, the glucose polymer cellulose is assembled into long microfibrils a few nanometers in diameter. The rigidity and orientation of these microfibrils control cell expansion; therefore, cellulose synthesis is a key factor in the growth and morphogenesis of plants. Celery (Apium graveolens) collenchyma is a useful model system for the study of primary wall microfibril structure because its microfibrils are oriented with unusual uniformity, facilitating spectroscopic and diffraction experiments. Using a combination of x-ray and neutron scattering methods with vibrational and nuclear magnetic resonance spectroscopy, we show that celery collenchyma microfibrils were 2.9 to 3.0 nm in mean diameter, with a most probable structure containing 24 chains in cross section, arranged in eight hydrogen-bonded sheets of three chains, with extensive disorder in lateral packing, conformation, and hydrogen bonding. A similar 18-chain structure, and 24-chain structures of different shape, fitted the data less well. Conformational disorder was largely restricted to the surface chains, but disorder in chain packing was not. That is, in position and orientation, the surface chains conformed to the disordered lattice constituting the core of each microfibril. There was evidence that adjacent microfibrils were noncovalently aggregated together over part of their length, suggesting that the need to disrupt these aggregates might be a constraining factor in growth and in the hydrolysis of cellulose for biofuel production.