[Submillimeter 3D coronary MR angiography with real-time navigator correction in 107 patients with suspected coronary artery disease]

Left main coronary artery disease: A review of the spectrum of noninvasive diagnostic modalities

Medically managed significant left main (LM) stem disease has been considered a determinant of increased cardiac mortality approaching 50% at 3-year follow-up. Despite the clinical significance of LM disease, studies comparing the various diagnostic modalities, especially noninvasive, are sparse. Clinicians, particularly imagers, should be aware of the strengths and weaknesses of existing modalities to diagnose LM disease as integrating many clues (history, symptoms, electrocardiogram, and stress hemodynamics are essential to suspect this diagnosis and proceed to the next step). Here we review the existing data on the current role of electrocardiography, nuclear myocardial perfusion imaging (single photon emission computed tomography and positron emission tomography), stress echocardiography, cardiac computed tomography, and cardiac magnetic resonance imaging in diagnostic evaluation of LM disease. Wherever applicable we have extended our discussion to multivessel coronary artery disease encompassing scenarios where LMS can present as LM equivalent with or without extensive multivessel coronary artery disease.

Contrast-enhanced cardiac magnetic resonance imaging

Cardiac magnetic resonance (CMR) imaging has significantly evolved in the past decade and is well established in the evaluation of coronary artery disease (CAD). The evaluation of cardiac anatomy and contractility by high-resolution CMR can be improved by using intravenous administration of gadolinium-based contrast agents. Delayed enhancement CMR imaging has become the gold standard for quantification of myocardial viability in CAD. Contrast-enhanced CMR imaging may circumvent the need for endomyocardial biopsy or localize the involved regions, thereby improving the diagnostic yield of this invasive procedure. The application of contrast-enhanced CMR as an advanced imaging technique for ischemic and nonischemic diseases is reviewed.

Coronary MR imaging: lumen and wall

Coronary MR imaging is a promising noninvasive technique for the combined assessment of coronary artery anatomy and function. Anomalous coronary arteries and aneurysms can reliably be assessed in clinical practice using coronary MR imaging and the presence of significant left main or proximal multivessel coronary artery disease detected. Technical challenges that need to be addressed are further improvements in motion suppression and abbreviated scanning times aimed at improving spatial resolution and patient comfort. The development of new and specific contrast agents, high-field MR imaging with improved spatial resolution, and continued progress in MR imaging methods development will undoubtedly lead to further progress toward the noninvasive and comprehensive assessment of coronary atherosclerotic disease.

Coronary computed tomography and magnetic resonance imaging

Cardiac computed tomography and magnetic resonance are relatively new imaging modalities that can exceed the ability of established imaging modalities to detect present pathology or predict patient outcomes. Coronary calcium scoring may be useful in asymptomatic patients at intermediate risk. Computed tomographic coronary angiography is a first-line indication to evaluate congenitally abnormal coronary arteries and, along with stress magnetic resonance myocardial perfusion imaging, is useful in symptomatic patients with nondiagnostic conventional stress tests. Cardiac magnetic resonance is indicated for visualizing cardiac structure and function, and delayed enhancement magnetic resonance is a first-line indication for assessing myocardial viability. Imaging plaque and molecular mechanisms related to plaque rupture holds great promise for the presymptomatic detection of patients at risk for coronary events but is not yet suitable for routine clinical use.

Coronary vessel wall evaluation by magnetic resonance imaging in the multi-ethnic study of atherosclerosis: determinants of image quality

OBJECTIVE

Coronary artery wall magnetic resonance imaging (MRI) has been developed to assess coronary lumen diameter and wall thickness. The purpose of this study was to evaluate the physiological parameters that affect the measures of coronary wall thickness using black-blood MRI pulse sequences.

METHODS

Eighty-seven participants (38 men and 49 women) of the Multi-Ethnic Study of Atherosclerosis were enrolled in the coronary artery wall MRI study. Cine 4-chamber imaging was used to determine the coronary artery rest period. Free-breathing whole-heart magnetic resonance angiography with motion adaptor navigator was performed to localize the coronary arteries in 64 participants. Cross-sectional free-breathing black-blood images were acquired using electrocardiogram-gated, turbo spin echo sequence. Imaging parameters were as follows: repetition time = 2 R-R intervals, time to echo = 33 milliseconds, echo train length = 13, bandwidth = 305 Hz/pixel, matrix = 416 x 416, field of view = 420 x 420 mm, and slice thickness = 4 to 5 mm.

RESULTS

Imaging was completed in 215 (92%) of 234 coronary segments; 9 participants had incomplete scans. Mean age was 62.6 +/- 8.4 years (range, 45-81 years). Mean body mass index was 29.2 +/- 5.9 kg/m2. A higher proportion of images with quality of "good" was seen in the right coronary artery (40.5%) compared to the left main and left anterior descending coronary arteries (31.9% and 26.4%, respectively). There was a very good agreement between observers in the image quality scores (kappa = 0.79, P < 0.001). Lower heart rate, male sex, and longer coronary rest period were associated with higher image quality score (P < 0.05). Signal-to-noise ratio was higher in participants with Agatston calcium score of more than 10 in the right coronary and left main arteries (48.5 vs 69.7, P = 0.001; and 53.4 vs 61.6, P = 0.032, respectively).

CONCLUSION

Improved depiction of the coronary artery wall with MRI is related to coronary rest period and atherosclerotic plaque burden as measured by calcium score and inversely related to heart rate. Because longer coronary artery rest periods are associated with improved image quality both for angiography with MRI and coronary artery wall imaging, heart rate-lowering methods in association with these techniques appear to be a logical application.

Clinical advantages of 3.0 T MRI over 1.5 T

Since approval by the FDA in 2000, human MR imaging (MRI) at 3.0 T has been increasingly used in clinical practice. In spite of the potential technical challenges, a number of clinical advantages of 3.0 T MRI over 1.5 T have been identified in the recent years. This article reviews the benefits and the current knowledge of 3.0 T whole-body MRI from an evidence-based perspective and summarizes its clinical applications.

Whole-heart coronary magnetic resonance angiography: contrast-enhanced high-resolution, time-resolved 3D imaging

OBJECTIVES

To test the feasibility and performance of a 4D magnetic resonance coronary angiography sequence compared with conventional inversion recovery (IR) prepared gradient echo imaging.

MATERIALS AND METHODS

A 4D sequence with 100 milliseconds temporal resolution was implemented on a 1.5 T system. Five minipigs were examined after administration of very small superparamagnetic iron oxide particles. Coronary angiographies with an isotropic resolution of 0.82 mm were performed in the pigs using 4D and IR sequences.

RESULTS

The 4D sequence allowed visualization of the coronary arteries, the effect of their movement and that of the entire heart without prolonging scan time. The contrast-to-noise ratio of the IR images was on average 38% higher than that of the corresponding 4D phase.

CONCLUSIONS

4D magnetic resonance imaging is superior in that no trigger delay time needs to be determined and an additional whole-heart cine study can be obtained.

Intraindividual comparison of 3D coronary MR angiography and coronary CT angiography

RATIONALE AND OBJECTIVES

To compare the diagnostic value of magnetic resonance (MR) and computed tomography (CT) for the detection of coronary artery disease (CAD) with special regard to calcifications.

MATERIALS AND METHODS

Twenty-seven patients with known CAD were examined with a targeted, navigator-gated, free-breathing, steady-state free precession MR angiography sequence (repetition time = 5.6 milliseconds, echo time = 2.8 milliseconds, flip angle 110 degrees ) and 16-slice coronary CT angiography. Segment-based sensitivity, specificity, and accuracy for the detection of stenoses larger than 50% were determined as defined by the gold standard catheter coronary angiography along with the subjective image quality (Grade 1-4). The degree of calcifications in each segment was quantified using a standard calcium scoring tool.

RESULTS

Of 115 possible segments, 7% had to be excluded in MR imaging because of poor image quality. In CT, 3% were nondiagnostic because of image quality and 15% were not evaluable because of calcifications. Values for the detection of relevant coronary artery stenoses in the evaluated segments were: sensitivity: MR imaging 85% versus CT 96%; specificity: 88% versus 96%; accuracy: 87% versus. 96%. Average subjective image quality was 1.8 for MR imaging and 1.6 for CT. Of the 15% of segments that had to be excluded from CT evaluation because of calcifications, MR imaging provided the correct diagnosis segments in 67%.

CONCLUSIONS

CT provided a better image quality with superior accuracy for the detection of CAD. Despite its overall inferiority, MR imaging proved to be helpful method in interpreting coronary stenosis in severely calcified segments.

MRI of the coronary vessel wall at 3 T: comparison of radial and cartesian k-space sampling

OBJECTIVE

The purpose of our study was to compare the quality of 3D gradient-echo images obtained using radial versus cartesian k-space sampling at 3 T.

CONCLUSION

This study shows that the quality of coronary vessel wall imaging of the right coronary artery with radial k-space sampling in 3D turbo field-echo sequences is superior to cartesian k-space sampling at 3 T. Radial k-space sampling at 3 T makes it possible to combine low motion artifact susceptibility with high signal-to-noise ratio.

Toward single breath-hold whole-heart coverage coronary MRA using highly accelerated parallel imaging with a 32-channel MR system

Coronary MR angiography (CMRA) is generally confined to the acquisition of multiple targeted slabs with coverage dictated by the competing constraints of signal-to-noise ratio (SNR), physiological motion, and scan time. This work addresses these obstacles by demonstrating the technical feasibility of using a 32-channel coil array and receiver system for highly accelerated volumetric breath-hold CMRA. The use of the 32-element array in unaccelerated CMRA studies provided a baseline SNR increase of as much as 40% over conventional cardiac-optimized phased array coils, which resulted in substantially enhanced image quality and improved delineation of the coronary arteries. Modest accelerations were used to reduce breath-hold durations for tailored coverage of the coronary arteries using targeted multi-oblique slabs to as little as 10 s. Finally, high net accelerations were combined with the SNR advantages of a 3D steady-state free precession (SSFP) technique to achieve previously unattainable comprehensive volumetric coverage of the coronary arteries in a single breath-hold. The merits and limitations of this simplified volumetric imaging approach are discussed and its implications for coronary MRA are considered.

Combination of free-breathing and breathhold steady-state free precession magnetic resonance angiography for detection of coronary artery stenoses

PURPOSE

To analyze the incremental diagnostic value of a combination of two approaches (free-breathing and breathhold) vs. the sole free-breathing approach to coronary magnetic resonance angiography (CMRA) for detection of significant stenoses.

MATERIALS AND METHODS

Thirty patients were consecutively included in this prospective trial. CMRA was performed on a 1.5-T MR scanner (Magnetom Sonata, Siemens) using a balanced steady-state free precession (SSFP) sequence during free-breathing (2.4 x 0.9 x 0.7 mm3). Breathholding acquisitions (3.0 x 1.5 x 0.7 mm3) were only performed in cases in which the quality of free-breathing CMRA precluded assessment. Patients with contraindications to CMRA, claustrophobia, or nonassessable images were not excluded from the assessment of diagnostic accuracy (intention-to-diagnose design).

RESULTS

In 60% of all free-breathing coronary acquisitions the image quality was adequate for diagnostic assessment. For the remaining 40% of the cases, breathhold acquisitions were obtained. The sensitivity, specificity, nonassessable rate, and accuracy in identifying main coronary branches with significant stenoses using the combination of both breathing approaches and the free-breathing approach alone were 65% vs. 32%, 73% vs. 53%, 24% vs. 52%, and 71% vs. 46%, respectively (P < 0.001).

CONCLUSION

In this consecutive cohort of patients, the combination of free-breathing and breathhold CMRA significantly improved diagnostic accuracy. Nevertheless, even this combination did not reach accuracies sufficient for routine clinical application.

Free-breathing whole-heart coronary MR angiography on a clinical scanner in four minutes

PURPOSE

To set up a robust and patient-friendly whole-heart protocol based on 32-receive-channel technology that will potentially allow a large part of the patient population to be addressed.

MATERIALS AND METHODS

Ten volunteers were examined on a clinical 1.5 T scanner equipped with a 32-channel data acquisition system using an experimental 32-element coil array. A magnetization-prepared, navigator-gated and -tracked 3D Cartesian balanced FFE sequence was used for whole-heart coronary MR angiography (MRA). With the use of sensitivity encoding (SENSE) and partial Fourier encoding for scan acceleration, nearly isotropic high-resolution data sets were acquired during free breathing in four minutes.

RESULTS

A high contrast and sufficient signal-to-noise ratio (SNR) were obtained, which allowed visualization of the major vessels up to the distal regions and detection of major branches. Phase encoding in the anterior-posterior (AP) direction was the most favorable SENSE configuration and allowed a reasonable scan time reduction with moderate SENSE factors.

CONCLUSION

The employed 32-receive channel technology enabled a robust trade-off among SNR, spatial resolution, and scan time. In this study the most robust results were obtained using the smallest possible SENSE factors for a given voxel size and scan time.

Parallel imaging in cardiovascular MRI: methods and applications

Cardiovascular MR imaging (CVMR) has become a valuable modality for the non-invasive detection and characterization of cardiovascular diseases. CVMR requires high imaging speed and efficiency, which is fundamentally limited in conventional cardiovascular MRI studies. With the introduction of parallel imaging, alternative means for increasing acquisition speed beyond these limits have become available. In parallel imaging some image data are acquired simultaneously, using RF detector coil sensitivities to encode simultaneous spatial information that complements the information gleaned from sequential application of magnetic field gradients. The resulting improvements in imaging speed can be used in various ways, including shortening long examinations, improving spatial resolution and/or anatomic coverage, improving temporal resolution, enhancing image quality, overcoming physiological constraints, detecting and correcting for physiologic motion, and streamlining work flow. Examples of each of these strategies will be provided in this review. First, basic principles and key concepts of parallel MR are described. Second, practical considerations such as coil array design, coil sensitivity calibrations, customized pulse sequences and tailored imaging parameters are outlined. Next, cardiovascular applications of parallel MR are reviewed, ranging from cardiac anatomical and functional assessment to myocardial perfusion and viability to MR angiography of the coronary arteries and the large vessels. Finally, current trends and future directions in parallel CVMR are considered.

Coronary magnetic resonance imaging: current state-of-the-art

Over the past decade, coronary magnetic resonance imaging has been transformed from a scientific curiosity to a clinically useful imaging tool for patients with known or suspected anomalous coronary arteries or coronary artery aneurysms and for assessment of coronary artery bypass graft patency. Coronary magnetic resonance imaging also appears to be of clinical value for assessment of native vessel integrity in selected patients, especially those patients with suspected left main/multivessel disease. Among patients referred for X-ray angiography, a normal coronary magnetic resonance imaging strongly suggests the absence of severe multivessel disease. Technical and methodological advances in motion suppression, along with increasing clinical experience will no doubt facilitate improved visualization of the distal and branch vessel.

64-slice multidetector coronary CT angiography: in vitro evaluation of 68 different stents

The purpose of this study was to test a large sample of different coronary artery stents using four image reconstruction approaches with respect to lumen visualization, lumen attenuation, and image noise in 64-slice multidetector-row computed tomography (MDCT) in vitro and to provide a catalogue of currently used coronary artery stents when imaged with state-of the-art MDCT. We examined 68 different coronary artery stents (57 stainless steel, four cobalt-chromium, one cobalt-alloy, two nitinol, four tantalum) in a coronary artery phantom (vessel diameter 3 mm, intravascular attenuation 250 HU, extravascular density -70). Stents were imaged in axial orientation with standard parameters: 32 x 0.6 collimation, pitch 0.24, 680 mAs, 120 kV, rotation time 0.37 s. Four different image reconstructions were obtained with varying convolution kernels and section thicknesses: (1) soft, 0.6 mm, (2) soft, 0.75, (3) medium soft, 0.6, and (4) stent-optimized sharp, 0.6. To evaluate visualization characteristics of of the stent, the lumen diameter, intraluminal density and noise were measured. The high-resolution kernel offered significantly better average lumen visualization (57% +/-10%) and more realistic lumen attenuation (222 HU +/-66 HU) at the expense of increased noise (15.3 HU +/-3.7 HU) compared with the soft and medium-soft CT angiography (CTA) protocol (p<0.001 for all). Stents with a lumen visibility of more than 66% were: Arthos pico, Driver, Flex, Nexus2, S7, Tenax complete, Vision (all 67%), Symbiot, Teneo (70%), and Radius (73%). Only ten stents showed a lumen visibility of less than 50%. Stent lumen visibility largely varies depending on the stent type. Even with the improved spatial resolution of 64-slice CT, a stent-optimized kernel remains beneficial for stent visualization when compared with the standard medium-soft CTA protocol. Using 64-slice CT and high-resolution kernel, the majority of stent products show a lumen visibility of more than 50% of the stent diameter.

Comparison of 3D segmented gradient-echo and steady-state free precession coronary MRI sequences in patients with coronary artery disease

OBJECTIVE

Our objective was to compare two state-of-the-art coronary MRI (CMRI) sequences with regard to image quality and diagnostic accuracy for the detection of coronary artery disease (CAD).

SUBJECTS AND METHODS

Twenty patients with known CAD were examined with a navigator-gated and corrected free-breathing 3D segmented gradient-echo (turbo field-echo) CMRI sequence and a steady-state free precession sequence (balanced turbo field-echo). CMRI was performed in a transverse plane for the left coronary artery and a double-oblique plane for the right coronary artery system. Subjective image quality (1- to 4-point scale, with 1 indicating excellent quality) and objective image quality parameters were independently determined for both sequences. Sensitivity, specificity, and accuracy for the detection of significant (> or = 50% diameter) coronary artery stenoses were determined as defined in invasive catheter X-ray coronary angiography.

RESULTS

Subjective image quality was superior for the balanced turbo field-echo approach (1.8 +/- 0.9 vs 2.3 +/- 1.0 for turbo field-echo; p < 0.001). Vessel sharpness, signal-to-noise ratio, and contrast-to-noise ratio were all superior for the balanced turbo field-echo approach (p < 0.01 for signal-to-noise ratio and contrast-to-noise ratio). Of the 103 segments, 18% of turbo field-echo segments and 9% of balanced turbo field-echo segments had to be excluded from disease evaluation because of insufficient image quality. Sensitivity, specificity, and accuracy for the detection of significant coronary artery stenoses in the evaluated segments were 92%, 67%, 85%, respectively, for turbo field-echo and 82%, 82%, 81%, respectively, for balanced turbo field-echo.

CONCLUSION

Balanced turbo field-echo offers improved image quality with significantly fewer nondiagnostic segments when compared with turbo field-echo. For the detection of CAD, both sequences showed comparable accuracy for the visualized segments.

Coronary magnetic resonance imaging: visualization of the vessel lumen and the vessel wall and molecular imaging of arteriothrombosis

Coronary magnetic resonance (MR) imaging has dramatically emerged over the last decade. Technical improvements have enabled reliable visualization of the proximal and midportion of the coronary artery tree for exclusion of significant coronary artery disease. However, current technical developments focus also on direct visualization of the diseased coronary vessel wall and imaging of coronary plaque because plaques without stenoses are typically more vulnerable with higher risk of plaque rupture. Plaque rupture with subsequent thrombosis and vessel occlusion is the main cause of myocardial infarction. Very recently, the first success of molecular imaging in the coronary arteries has been demonstrated using a fibrin-specific contrast agent for selective visualization of coronary thrombosis. This demonstrates in general the high potential of molecular MR imaging in the field of coronary artery disease. In this review, we will address recent technical advances in coronary MR imaging, including visualization of the lumen and the vessel wall and molecular imaging of coronary arteriothrombosis. First results of these new approaches will be discussed.

Feasibility of Integrating High-Spatial-Resolution 3D Breath-hold Coronary MR Angiography with Myocardial Perfusion and Viability Examinations

The study was institutional review board approved and Health Insurance Portability and Accountability Act compliant. All subjects provided informed consent. Three-dimensional breath-hold coronary magnetic resonance (MR) angiography with use of steady-state free precession was performed in 12 patients up to 20 minutes after 0.2 mmol gadolinium-based contrast material per kilogram of body weight was administered. Within 24 heartbeats, a spatial resolution of up to 1.0 x 1.2 x 2.0 mm was achieved. Sixty-five (82%) of the 79 visualized coronary artery segments had a grade of 3 or 4 on a four-point scale of depiction in which grade 4 indicated excellent depiction. Twenty-seven percent (n = 21) of the 79 segments were assigned a grade of 4; 56% (n = 44), a grade of 3; 16% (n = 13), a grade of 2; and 1% (n = 1), a grade of 1. Coronary MR angiography performed as part of a first-pass myocardial perfusion and viability assessment MR imaging examination is feasible and does not involve additional imaging time.

3D motion adapted gating (3D MAG): a new navigator technique for accelerated acquisition of free breathing navigator gated 3D coronary MR-angiography

This study aimed to evaluate the influence of a new navigator technique (3D MAG) on navigator efficiency, total acquisition time, image quality and diagnostic accuracy. Fifty-six patients with suspected coronary artery disease underwent free breathing navigator gated coronary MRA (Intera, Philips Medical Systems, 1.5 T, spatial resolution 0.9x0.9x3 mm3) with and without 3D MAG. Evaluation of both sequences included: 1) navigator scan efficiency, 2) total acquisition time, 3) assessment of image quality and 4) detection of stenoses >50%. Average navigator efficiencies of the LCA and RCA were 43+/-12% and 42+/-12% with and 36+/-16% and 35+/-16% without 3D MAG (P<0.01). Scan time was reduced from 12 min 7 s without to 8 min 55 s with 3D MAG for the LCA and from 12 min 19 s to 9 min 7 s with 3D MAG for the RCA (P<0.01). The average scores of image quality of the coronary MRAs with and without 3D MAG were 3.5+/-0.79 and 3.46+/-0.84 (P>0.05). There was no significant difference in the sensitivity and specificity in the detection of coronary artery stenoses between coronary MRAs with and without 3D MAG (P>0.05). 3D MAG provides accelerated acquisition of navigator gated coronary MRA by about 19% while maintaining image quality and diagnostic accuracy.

Diagnostic performance of coronary magnetic resonance angiography as compared against conventional X-ray angiography: a meta-analysis

OBJECTIVES

This study was designed to define the current role of coronary magnetic resonance angiography (CMRA) for the diagnosis of coronary artery disease (CAD).

BACKGROUND

Coronary magnetic resonance angiography has been proposed as a promising noninvasive method for diagnosis of CAD, but individual studies evaluating its clinical value have been of limited sample size.

METHODS

We identified all studies (MEDLINE and EMBASE) that evaluated CAD by both CMRA and conventional angiography in >/=10 subjects during the period 1991 to January 2004. We recorded true and false positive and true and false negative CMRA assessments for detection of CAD using X-ray angiography as the reference standard. Analysis was done at segment, vessel, and subject level.

RESULTS

We analyzed 39 studies (41 separate comparisons). Across 25 studies (27 comparisons) with data on 4,620 segments (993 subjects), sensitivity and specificity for detection of CAD were 73% and 86%, respectively. Vessel-level analyses (16 studies, 2,041 vessels) showed sensitivity 75% and specificity 85%. Subject-level analyses (13 studies, 607 subjects) showed sensitivity 88% and specificity 56%. At the segment level, sensitivity was 69% to 79% for all but the left circumflex (61%) coronary artery; specificity was 82% to 91%. There was considerable between-study heterogeneity, but weighted summary receiver-operating characteristic curves agreed with these estimates. There were no major differences between subgroups based on technical or population characteristics, year of publication, reported blinding, or sample size.

CONCLUSIONS

In evaluable segments of the native coronary arteries, CMRA has moderately high sensitivity for detecting significant proximal stenoses and may have value for exclusion of significant multivessel CAD in selected subjects considered for diagnostic catheterization.

Short breath-hold, volumetric coronary MR angiography employing steady-state free precession in conjunction with parallel imaging

An ECG-gated, 3D steady-state free precession (SSFP) technique in conjunction with sensitivity encoding (SENSE)-based parallel imaging was implemented for short breath-hold, volumetric coronary MR angiograpy (CMRA). Two parallel imaging acquisition strategies (employing 1 R-R and 2 R-R intervals, respectively) were developed to achieve 1) very short breath-hold times (12 s for a heart rate of 60 bpm), and 2) small acquisition windows to minimize sensitivity to physiologic motion. Both strategies were examined in CMRA applications over a range of heart rates. A four-point scale blinded reading (with 4 indicating the most desirable features) revealed substantial image quality improvements for the accelerated data as compared to the nonaccelerated approach. The 1 R-R interval scheme yielded an image score of 3.39 +/- 0.60, and was found to be particularly suitable for low heart rates (P = 0.0008). The 2 R-R interval strategy yielded an image score of 3.35 +/- 0.64, and was more appropriate for higher heart rates (P = 0.03). The results demonstrate that 3D SSFP combined with parallel imaging is a versatile method for short breath-hold CMRA while maintaining high spatial resolution. This strategy permits imaging of the major coronary artery distributions in two to three breath-holds using targeted slabs, and offers the potential for single breath-hold, large-volume CMRA.

MR Coronary Angiography with SH L 643 A: Initial Experience in Patients with Coronary Artery Disease

PURPOSE

To prospectively assess the accuracy of breath-hold three-dimensional magnetic resonance (MR) coronary angiography with the gadolinium-based intravascular contrast agent SH L 643 A in patients with coronary artery disease.

MATERIALS AND METHODS

Twelve patients (seven men, five women; age range, 46-78 years; mean age, 61.3 years) with angiographically proved coronary artery disease (luminal narrowing >50%) underwent breath-hold three-dimensional MR coronary angiography before and after injection of SH L 643 A (0.1 mmol gadolinium per kilogram body weight). For all MR examinations, signal-to-noise ratio and contrast-to-noise ratio were measured. Image quality was assessed with a four-point scale. Conventional angiograms and MR angiograms were evaluated for depiction of the left main, proximal and middle left anterior descending, proximal left circumflex, and proximal and middle right coronary artery segments in a blinded fashion by two experienced readers in consensus. Results of this evaluation were compared by using a paired Student t test. P < .05 was considered to indicate a statistically significant difference.

RESULTS

For the 72 coronary artery segments, the contrast-to-noise ratio significantly improved after administration of SH L 643 A, compared with the prior ratio (9.8 +/- 5.1 [standard deviation] vs 23.0 +/- 8.7; P < .01), whereas the difference in signal-to-noise ratio did not reach statistical significance (25.2 +/- 11.4 vs 29.5 +/- 9.8; P > .3). Image quality significantly improved from a mean of 2.0 +/- 0.9 for nonenhanced images to 2.9 +/- 0.9 (P < .03) for contrast material-enhanced images. The proportion of segments for which images were nondiagnostic decreased from 38% to 10% with application of SH L 643 A. Overall sensitivity and specificity of contrast-enhanced MR coronary angiography for detection of coronary artery disease were 80% and 93%, respectively, and accuracy was 87%.

CONCLUSION

Use of SH L 643 A improves detection of coronary artery disease at three-dimensional MR coronary angiography.

MRI in coronary artery disease

Diagnosis of coronary artery disease (CAD) is a major challenge for medical imaging, because CAD is the leading cause of death in developed nations. Several non-invasive tests are used in clinical routine for the detection of CAD. However, due to limited sensitivity and specificity, the reliable diagnosis as well as the exclusion of CAD can only be established by catheter angiography. In patients with known CAD, therapeutic decisions require accurate information on myocardial function, ischemia and viability. Recently, magnetic resonance (MR) imaging has emerged as a non-invasive cardiac imaging technique that provides information on cardiac morphology, cardiac function, myocardial viability, and coronary morphology. This review discusses technical aspects and the clinical impact of different MR techniques.

Multisegment and halfscan reconstruction of 16-slice computed tomography for detection of coronary artery stenoses

RATIONALE AND OBJECTIVES

To compare the diagnostic accuracy and image quality of 2 reconstruction algorithms (multisegment and halfscan) for computed tomography (CT) coronary angiography in patients without beta-blocker medication.

MATERIALS AND METHODS

Thirty-four patients with 42 significant coronary stenoses in 136 main coronary branches were examined using a 16-slice CT scanner (Aquilion, Toshiba, Otawara, Japan). Twenty-seven patients (79%) had heart rates above 65 beats/min.

RESULTS

Without exclusion of branches the sensitivity, specificity, accuracy, and rate of nonassessable segments with multisegment versus halfscan reconstruction were 88 versus 74%, 91 versus 71%, 90 versus 72%, and 2 versus 21% (P < 0.01), respectively. Multisegment reconstruction improved the average vessel length free of motion artifacts by 56% compared with halfscan reconstruction (P < 0.01). Image quality in terms of vessel continuity and visibility of side branches (P < 0.005) was significantly better using multisegment reconstruction.

CONCLUSIONS

Multisegment reconstruction has superior diagnostic accuracy and image quality compared with halfscan reconstruction in patients with normal heart rates.

Parallel acquisition techniques in cardiac cine magnetic resonance imaging using TrueFISP sequences: Comparison of image quality and artifacts

PURPOSE

To compare image quality, artifacts, and signal-to-noise ratio (SNR) in cardiac cine TrueFISP magnetic resonance imaging (MRI) with and without parallel acquisition techniques (PAT).

MATERIALS AND METHODS

MRI was performed in 16 subjects with a TrueFISP sequence (1.5 T; Magnetom Sonata, Siemens): TR, 3.0 msec; TE, 1.5 msec; flip angle (FA), 60 degrees. Three axes were scanned without PAT (no PAT) and using the generalized autocalibrating partially parallel acquisition (GRAPPA) and modified sensitivity encoding (mSENSE) reconstruction algorithms with an autocalibration mode to reduce scan time. A conventional spine array and a body flex array were used. Artifacts, image noise, and overall image quality were classified on a 4-point scale by an observer blinded to the implemented technique; for quantitative comparison, SNR was measured.

RESULTS

With a PAT factor of two, acquisition time could be reduced by 39%. No PAT did not show artifacts, and GRAPPA revealed fewer artifacts than mSENSE. PAT provided inferior-quality scores concerning image noise and overall image quality. In quantitative measurements, GRAPPA and mSENSE (20.1 +/- 6.2 and 15.6 +/- 6.2, respectively) yielded lower SNR than no PAT (30.6 +/- 20.1; P < 0.05) and P < 0.001).

CONCLUSION

Time savings in PAT are accompanied by artifacts and an increase in image noise. The GRAPPA algorithm was superior to mSENSE concerning image quality, noise, and SNR.