A direct-compatible formulation of the coupled perturbed complete active space self-consistent field equations on graphical processing units

Analytical SA-HCISCF Nuclear Gradients from Spin-Adapted Heat-Bath Configuration Interaction

This work reports an implementation of the analytical nuclear gradients and nonadiabatic couplings with state-averaged SCF wave functions from a spin-pure selected configuration interaction (SCI) method. At the core of the implementation lies the evaluation of the Lagrange multipliers required for the variational calculation of the nuclear gradient. Using the same code infrastructure, we developed a fully CI-coupled second-order orbital optimization method. Both the calculation of the nuclear gradient and the second-order orbital optimization make use of density fitting in order to accelerate the calculation of the two-electron integrals. We demonstrate the use of analytical nuclear gradients in excited-state geometry optimizations for conjugated molecules. In addition, the first triplet excited-state geometry of a transition-metal catalyst, Fe(PDI), was optimized with up to 30 orbitals in the active space. Our results outline the capabilities of the implemented methods as well as directions for future work.

Initial Conditions for Excited-State Dynamics in Solvated Systems: A Case Study

Simulating excited-state dynamics or computing spectra for molecules in condensed phases requires sampling the ground state to generate initial conditions. Initial conditions (or snapshots for spectra) are typically produced by QM/MM Boltzmann sampling following MM equilibration or optimization. Given the switch from a MM to a QM/MM potential energy surface, one should discard a set period of time (which we call the "healing time") from the beginning of the QM/MM trajectory. Ideally, the healing time is as short as possible (to avoid unnecessary computational effort), but long enough to equilibrate to the QM/MM ground state distribution. Healing times in previous studies range from tens of femtoseconds to tens of picoseconds, suggesting the need for guidelines to choose a healing time. We examine the effect of healing time on the nonadiabatic dynamics and spectrum of a first-generation Donor-Acceptor Stenhouse Adduct in chloroform. Insufficient healing times skew the branching ratio of ground state products and alter the relaxation time for one pathway. The influence of the healing time on the absorption spectrum is less pronounced, warning that the spectrum is not a sensitive indicator for the quality of a set of initial conditions for dynamics. We demonstrate that a reasonable estimate for the healing time can be obtained by monitoring the solute temperature during the healing trajectory. We suggest that this procedure should become standard practice for determining healing times to generate initial conditions for nonadiabatic QM/MM simulations in large molecules and condensed phases.

Coherence mapping to identify the intermediates of multi-channel dissociative ionization

Identifying the short-lived intermediates and reaction mechanisms of multi-channel radical cation fragmentation processes remains a current and important challenge to understanding and predicting mass spectra. We find that coherent oscillations in the femtosecond time-dependent yields of several product ions following ultrafast strong-field ionization represent spectroscopic signatures that elucidate their mechanism of formation and identify the intermediate(s) they originate from. Experiments on endo-dicyclopentadiene show that vibrational frequencies from various intermediates are mapped onto their resulting products. Aided by ab initio methods, we identify the vibrational modes of both the cleaved and intact molecular ion intermediates. These results confirm stepwise and concerted fragmentation pathways of the dicyclopentadiene ion. This study highlights the power of tracking the femtosecond dynamics of all product ions simultaneously and sheds further light onto one of the fundamental reaction mechanisms in mass spectrometry, the retro-Diels Alder reaction.

Galván I, Rivalta I, Aquilante F, Garavelli M, Lindh R, Segarra-Martí J. Characterizing Conical Intersections in DNA/RNA Nucleobases with Multiconfigurational Wave Functions of Varying Active Space Size

We characterize the photochemically relevant conical intersections between the lowest-lying accessible electronic excited states of the different DNA/RNA nucleobases using Cholesky decomposition-based complete active space self-consistent field (CASSCF) algorithms. We benchmark two different basis set contractions and several active spaces for each nucleobase and conical intersection type, measuring for the first time how active space size affects conical intersection topographies in these systems and the potential implications these may have toward their description of photoinduced phenomena. Our results show that conical intersection topographies are highly sensitive to the electron correlation included in the model: by changing the amount (and type) of correlated orbitals, conical intersection topographies vastly change, and the changes observed do not follow any converging pattern toward the topographies obtained with the largest and most correlated active spaces. Comparison across systems shows analogous topographies for almost all intersections mediating population transfer to the dark 1nO/Nπ* states, while no similarities are observed for the "ethylene-like" conical intersection ascribed to mediate the ultrafast decay component to the ground state in all DNA/RNA nucleobases. Basis set size seems to have a minor effect, appearing to be relevant only for purine-based derivatives. We rule out structural changes as a key factor in classifying the different conical intersections, which display almost identical geometries across active space and basis set change, and we highlight instead the importance of correctly describing the electronic states involved at these crossing points. Our work shows that careful active space selection is essential to accurately describe conical intersection topographies and therefore to adequately account for their active role in molecular photochemistry.

Analytic Non-adiabatic Couplings for Selected Configuration Interaction via Approximate Degenerate Coupled Perturbed Hartree-Fock

We use degenerate perturbation theory and assume that for degenerate pairs of orbitals, the coupled perturbed Hartree-Fock coefficients are symmetric in the degenerate basis to show [Formula: see text] is the only modification needed in the original molecular orbital basis. This enables us to develop efficient and accurate analytic nonadiabatic couplings between electronic states for selected configuration interactions (CIs). Even when the states belong to different irreducible representations, degenerate orbital pairs cannot be excluded by symmetry. For various excited states of carbon monoxide and trigonal planar ammonia, we benchmark the method against the full CI and find it to be accurate. We create a semi-numerical approach and use it to show that the analytic approach is correct even when a high-symmetry structure is distorted to break symmetry so that near degeneracies in orbitals occur. For a range of geometries of trigonal planar ammonia, we find that the analytic non-adiabatic couplings for selected CI can achieve sufficient accuracy using a small fraction of the full CI space.

Drug Design in the Exascale Era: A Perspective from Massively Parallel QM/MM Simulations

The initial phases of drug discovery - in silico drug design - could benefit from first principle Quantum Mechanics/Molecular Mechanics (QM/MM) molecular dynamics (MD) simulations in explicit solvent, yet many applications are currently limited by the short time scales that this approach can cover. Developing scalable first principle QM/MM MD interfaces fully exploiting current exascale machines - so far an unmet and crucial goal - will help overcome this problem, opening the way to the study of the thermodynamics and kinetics of ligand binding to protein with first principle accuracy. Here, taking two relevant case studies involving the interactions of ligands with rather large enzymes, we showcase the use of our recently developed massively scalable Multiscale Modeling in Computational Chemistry (MiMiC) QM/MM framework (currently using DFT to describe the QM region) to investigate reactions and ligand binding in enzymes of pharmacological relevance. We also demonstrate for the first time strong scaling of MiMiC-QM/MM MD simulations with parallel efficiency of ∼70% up to >80,000 cores. Thus, among many others, the MiMiC interface represents a promising candidate toward exascale applications by combining machine learning with statistical mechanics based algorithms tailored for exascale supercomputers.

Rehybridization dynamics into the pericyclic minimum of an electrocyclic reaction imaged in real-time

Electrocyclic reactions are characterized by the concerted formation and cleavage of both σ and π bonds through a cyclic structure. This structure is known as a pericyclic transition state for thermal reactions and a pericyclic minimum in the excited state for photochemical reactions. However, the structure of the pericyclic geometry has yet to be observed experimentally. We use a combination of ultrafast electron diffraction and excited state wavepacket simulations to image structural dynamics through the pericyclic minimum of a photochemical electrocyclic ring-opening reaction in the molecule α-terpinene. The structural motion into the pericyclic minimum is dominated by rehybridization of two carbon atoms, which is required for the transformation from two to three conjugated π bonds. The σ bond dissociation largely happens after internal conversion from the pericyclic minimum to the electronic ground state. These findings may be transferrable to electrocyclic reactions in general.

An Expedited Route to Optical and Electronic Properties at Finite Temperature via Unsupervised Learning

Electronic properties and absorption spectra are the grounds to investigate molecular electronic states and their interactions with the environment. Modeling and computations are required for the molecular understanding and design strategies of photo-active materials and sensors. However, the interpretation of such properties demands expensive computations and dealing with the interplay of electronic excited states with the conformational freedom of the chromophores in complex matrices (i.e., solvents, biomolecules, crystals) at finite temperature. Computational protocols combining time dependent density functional theory and ab initio molecular dynamics (MD) have become very powerful in this field, although they require still a large number of computations for a detailed reproduction of electronic properties, such as band shapes. Besides the ongoing research in more traditional computational chemistry fields, data analysis and machine learning methods have been increasingly employed as complementary approaches for efficient data exploration, prediction and model development, starting from the data resulting from MD simulations and electronic structure calculations. In this work, dataset reduction capabilities by unsupervised clustering techniques applied to MD trajectories are proposed and tested for the ab initio modeling of electronic absorption spectra of two challenging case studies: a non-covalent charge-transfer dimer and a ruthenium complex in solution at room temperature. The K-medoids clustering technique is applied and is proven to be able to reduce by ∼100 times the total cost of excited state calculations on an MD sampling with no loss in the accuracy and it also provides an easier understanding of the representative structures (medoids) to be analyzed on the molecular scale.

State-Specific Configuration Interaction for Excited States

We introduce and benchmark a systematically improvable route for excited-state calculations, labeled state-specific configuration interaction (ΔCI), which is a particular realization of multiconfigurational self-consistent field and multireference configuration interaction. Starting with a reference built from optimized configuration state functions, separate CI calculations are performed for each targeted state (hence, state-specific orbitals and determinants). Accounting for single and double excitations produces the ΔCISD model, which can be improved with second-order Epstein-Nesbet perturbation theory (ΔCISD+EN2) or a posteriori Davidson corrections (ΔCISD+Q). These models were gauged against a vast and diverse set of 294 reference excitation energies. We have found that ΔCI is significantly more accurate than standard ground-state-based CI, whereas close performances were found between ΔCISD and EOM-CC2 and between ΔCISD+EN2 and EOM-CCSD. For larger systems, ΔCISD+Q delivers more accurate results than EOM-CC2 and EOM-CCSD. The ΔCI route can handle challenging multireference problems, singly and doubly excited states, from closed- and open-shell species, with overall comparable accuracy and thus represents a promising alternative to more established methodologies. In its current form, however, it is reliable only for relatively low-lying excited states.

Computation of NMR shieldings at the CASSCF level using gauge-including atomic orbitals and Cholesky decomposition

We present an implementation of coupled-perturbed complete active space self-consistent field (CP-CASSCF) theory for the computation of nuclear magnetic resonance chemical shifts using gauge-including atomic orbitals and Cholesky decomposed two-electron integrals. The CP-CASSCF equations are solved using a direct algorithm where the magnetic Hessian matrix-vector product is expressed in terms of one-index transformed quantities. Numerical tests on systems with up to about 1300 basis functions provide information regarding both the computational efficiency and limitations of our implementation.

Steric and Electronic Origins of Fluorescence in GFP and GFP-like Proteins

Fluorescent proteins have become routine tools for biological imaging. However, their nanosecond lifetimes on the excited state present computational hurdles to a full understanding of these photoactive proteins. In this work, we simulate approximately 0.5 nanoseconds of ab initio molecular dynamics to elucidate steric and electronic features responsible for fluorescent protein behavior. Using green fluorescent protein (GFP) and Dronpa2─widely used fluorescent proteins with contrasting functionality─as case studies, we leverage previous findings in the gas phase and solution to explore the deactivation mechanisms available to these proteins. Starting with ground-state analyses, we identify steric (the distribution of empty pockets near the chromophore) and electronic (electric fields exerted on chromophore moieties) factors that offer potential avenues for rational design. Picosecond timescale simulations on the excited state reveal that the chromophore can access twisted structures in Dronpa2, while the chromophore is largely confined to planarity in GFP. We couple ab initio multiple spawning (AIMS) and enhanced sampling simulations to discover and characterize conical intersection seams that facilitate internal conversion, which is a rare event in both systems. Our AIMS simulations correctly capture the relative fluorescence profiles of GFP and Dronpa2 within the first few picoseconds, and we attribute the diminished fluorescence intensity of Dronpa2, relative to GFP, to flexible chromophore intermediates on the excited state. Furthermore, we predict that twisted chromophore intermediates produce red-shifted intensities in the Dronpa2 fluorescence spectrum. If confirmed experimentally, this spectroscopic signature would provide valuable insights when screening and developing novel fluorescent proteins.

A multi-stage single photochrome system for controlled photoswitching responses

The ability of molecular photoswitches to convert on/off responses into large macroscale property change is fundamental to light-responsive materials. However, moving beyond simple binary responses necessitates the introduction of new elements that control the chemistry of the photoswitching process at the molecular scale. To achieve this goal, we designed, synthesized and developed a single photochrome, based on a modified donor-acceptor Stenhouse adduct (DASA), capable of independently addressing multiple molecular states. The multi-stage photoswitch enables complex switching phenomena. To demonstrate this, we show spatial control of the transformation of a three-stage photoswitch by tuning the population of intermediates along the multi-step reaction pathway of the DASAs without interfering with either the first or final stage. This allows for a photonic three-stage logic gate where the secondary wavelength solely negates the input of the primary wavelength. These results provide a new strategy to move beyond traditional on/off binary photochromic systems and enable the design of future molecular logic systems.

A trust-region augmented Hessian implementation for state-specific and state-averaged CASSCF wave functions

In this work, we present a one-step second-order converger for state-specific (SS) and state-averaged (SA) complete active space self-consistent field (CASSCF) wave functions. Robust convergence is achieved through step restrictions using a trust-region augmented Hessian (TRAH) algorithm. To avoid numerical instabilities, an exponential parameterization of variational configuration parameters is employed, which works with a nonredundant orthogonal complement basis. This is a common approach for SS-CASSCF and is extended to SA-CASSCF wave functions in this work. Our implementation is integral direct and based on intermediates that are formulated in either the sparse atomic-orbital or small active molecular-orbital basis. Thus, it benefits from a combination with efficient integral decomposition techniques, such as the resolution-of-the-identity or the chain-of-spheres for exchange approximations. This facilitates calculations on large molecules, such as a Ni(II) complex with 231 atoms and 5154 basis functions. The runtime performance of TRAH-CASSCF is competitive with the other state-of-the-art implementations of approximate and full second-order algorithms. In comparison with a sophisticated first-order converger, TRAH-CASSCF calculations usually take more iterations to reach convergence and, thus, have longer runtimes. However, TRAH-CASSCF calculations still converge reliably to a true minimum even if the first-order algorithm fails.

State-averaged CASSCF with polarizable continuum model for studying photoreactions in solvents: Energies, analytical nuclear gradients, and non-adiabatic couplings

This paper presents state-averaged complete active space self-consistent field in polarizable continuum model (PCM) for studies of photoreactions in solvents. The wavefunctions of the solute and the PCM surface charges of the solvent are optimized simultaneously such that the state-averaged free energy is variationally minimized. The method supports both fixed weights and dynamic weights where the weights are automatically adjusted based on the energy gaps. The corresponding analytical nuclear gradients and non-adiabatic couplings are also derived. Furthermore, we show how the new method can be entirely formulated in terms of seven basic operations, which allows the implementation to benefit from existing high-performance libraries on graphical processing units. Results demonstrating the accuracy and performance of the implementation are presented and discussed. We also apply the new method to the study of minimal conical intersection search and photoreaction energy pathways in solvents. Effects from the polarity of the solvents and different formulas of dynamic weights are compared and discussed.

Analytical Nonadiabatic Couplings and Gradients within the State-Averaged Orbital-Optimized Variational Quantum Eigensolver

We introduce several technical and analytical extensions to our recent state-averaged orbital-optimized variational quantum eigensolver (SA-OO-VQE) algorithm (see Yalouz et al. Quantum Sci. Technol. 2021, 6, 024004). Motivated by the limitations of current quantum computers, the first extension consists of an efficient state-resolution procedure to find the SA-OO-VQE eigenstates, and not just the subspace spanned by them, while remaining in the equi-ensemble framework. This approach avoids expensive intermediate resolutions of the eigenstates by postponing this problem to the very end of the full algorithm. The second extension allows for the estimation of analytical gradients and nonadiabatic couplings, which are crucial in many practical situations ranging from the search of conical intersections to the simulation of quantum dynamics, in, for example, photoisomerization reactions. The accuracy of our new implementations is demonstrated on the formaldimine molecule CH₂NH (a minimal Schiff base model relevant for the study of photoisomerization in larger biomolecules), for which we also perform a geometry optimization to locate a conical intersection between the ground and first-excited electronic states of the molecule.

Internal conversion of the anionic GFP chromophore: in and out of the I-twisted S1/S0 conical intersection seam

The functional diversity of the green fluorescent protein (GFP) family is intimately connected to the interplay between competing photo-induced transformations of the chromophore motif, anionic p-hydroxybenzylidene-2,3-dimethylimidazolinone (HBDI^-). Its ability to undergo Z/E-isomerization is of particular importance for super-resolution microscopy and emerging opportunities in optogenetics. Yet, key dynamical features of the underlying internal conversion process in the native HBDI^- chromophore remain largely elusive. We investigate the intrinsic excited-state behavior of isolated HBDI^- to resolve competing decay pathways and map out the factors governing efficiency and the stereochemical outcome of photoisomerization. Based on non-adiabatic dynamics simulations, we demonstrate that non-selective progress along the two bridge-torsional (i.e., phenolate, P, or imidazolinone, I) pathways accounts for the three decay constants reported experimentally, leading to competing ultrafast relaxation primarily along the I-twisted pathway and S₁ trapping along the P-torsion. The majority of the population (∼70%) is transferred to S₀ in the vicinity of two approximately enantiomeric minima on the I-twisted intersection seam (MECI-Is). Despite their sloped, reactant-biased topographies (suggesting low photoproduct yields), we find that decay through these intersections leads to products with a surprisingly high quantum yield of ∼30%. This demonstrates that E-isomer generation results at least in part from direct isomerization on the excited state. A photoisomerization committor analysis reveals a difference in intrinsic photoreactivity of the two MECI-Is and that the observed photoisomerization is the combined result of two effects: early, non-statistical dynamics around the less reactive intersection followed by later, near-statistical behavior around the more reactive MECI-I. Our work offers new insight into internal conversion of HBDI^- that both establishes the intrinsic properties of the chromophore and enlightens principles for the design of chromophore derivatives and protein variants with improved photoswitching properties.

Simplified State Interaction for Matrix Product State Wave Functions

We present an approximation to the state-interaction approach for matrix product state (MPS) wave functions (MPSSI) in a nonorthogonal molecular orbital basis, first presented by Knecht et al. [J. Chem. Theory Comput.,2016, 28, 5881], that allows for a significant reduction of the computational cost without significantly compromising its accuracy. The approximation is well-suited if the molecular orbital basis is close to orthogonality, and its reliability may be estimated a priori with a single numerical parameter. For an example of a platinum azide complex, our approximation offers up to 63-fold reduction in computational time compared to the original method for wave function overlaps and spin–orbit couplings, while still maintaining numerical accuracy.

Conformer-specific photochemistry imaged in real space and time

[Figure: see text].

Resolving the ultrafast dynamics of the anionic green fluorescent protein chromophore in water

The chromophore of the green fluorescent protein (GFP) is critical for probing environmental influences on fluorescent protein behavior. Using the aqueous system as a bridge between the unconfined vacuum system and a constricting protein scaffold, we investigate the steric and electronic effects of the environment on the photodynamical behavior of the chromophore. Specifically, we apply ab initio multiple spawning to simulate five picoseconds of nonadiabatic dynamics after photoexcitation, resolving the excited-state pathways responsible for internal conversion in the aqueous chromophore. We identify an ultrafast pathway that proceeds through a short-lived (sub-picosecond) imidazolinone-twisted (I-twisted) species and a slower (several picoseconds) channel that proceeds through a long-lived phenolate-twisted (P-twisted) intermediate. The molecule navigates the non-equilibrium energy landscape via an aborted hula-twist-like motion toward the one-bond-flip dominated conical intersection seams, as opposed to following the pure one-bond-flip paths proposed by the excited-state equilibrium picture. We interpret our simulations in the context of time-resolved fluorescence experiments, which use short- and long-time components to describe the fluorescence decay of the aqueous GFP chromophore. Our results suggest that the longer time component is caused by an energetically uphill approach to the P-twisted intersection seam rather than an excited-state barrier to reach the twisted intramolecular charge-transfer species. Irrespective of the location of the nonadiabatic population events, the twisted intersection seams are inefficient at facilitating isomerization in aqueous solution. The disordered and homogeneous nature of the aqueous solvent environment facilitates non-selective stabilization with respect to I- and P-twisted species, offering an important foundation for understanding the consequences of selective stabilization in heterogeneous and rigid protein environments.

Active orbital preservation for multiconfigurational self-consistent field

We introduce Active Orbital Preservation for Multiconfigurational Self-Consistent Field (AOP-MCSCF), an automated approach to improving the consistency of active space orbitals over multiple molecular configurations. Our approach is based on maximum overlap with a reference set of active space orbitals taken from a single geometry of a chromophore in the gas phase and can be used to automatically preserve the appropriate orbitals of the chromophore across multiple thermally sampled configurations, even when the chromophore is solvated by quantum-mechanically treated water molecules. In particular, using the singular value decomposition of a Molecular Orbital (MO) overlap matrix between the system and reference, we rotate the MOs of the system to align with the reference active space orbitals and use the resulting rotated orbitals as an initial guess to a MCSCF calculation. We demonstrate the approach on aqueous p-hydroxybenzylidene-imidazolinone (HBI) and find that AOP-MCSCF converges to the "correct" orbitals for over 90% of 3000 thermally sampled configurations. In addition, we compute the linear absorption spectrum and find excellent agreement with new experimental measurements up to 5.4 eV (230 nm). We show that electrostatic contributions to the solvation energy of HBI largely explain the observed state-dependent solvatochromism.

A diagrammatic approach for automatically deriving analytical gradients of tensor hyper-contracted electronic structure methods

We introduce a diagrammatic approach to facilitate the automatic derivation of analytical nuclear gradients for tensor hyper-contraction (THC) based electronic structure methods. The automatically derived gradients are guaranteed to have the same scaling in terms of both operation count and memory footprint as the underlying energy calculations, and the computation of a gradient is roughly three times as costly as the underlying energy. The new diagrammatic approach enables the first cubic scaling implementation of nuclear derivatives for THC tensors fitted in molecular orbital basis (MO-THC). Furthermore, application of this new approach to THC-MP2 analytical gradients leads to an implementation, which is at least four times faster than the previously reported, manually derived implementation. Finally, we apply the new approach to the 14 tensor contraction patterns appearing in the supporting subspace formulation of multireference perturbation theory, laying the foundation for developments of analytical nuclear gradients and nonadiabatic coupling vectors for multi-state CASPT2.

From NWChem to NWChemEx: Evolving with the Computational Chemistry Landscape

Since the advent of the first computers, chemists have been at the forefront of using computers to understand and solve complex chemical problems. As the hardware and software have evolved, so have the theoretical and computational chemistry methods and algorithms. Parallel computers clearly changed the common computing paradigm in the late 1970s and 80s, and the field has again seen a paradigm shift with the advent of graphical processing units. This review explores the challenges and some of the solutions in transforming software from the terascale to the petascale and now to the upcoming exascale computers. While discussing the field in general, NWChem and its redesign, NWChemEx, will be highlighted as one of the early codesign projects to take advantage of massively parallel computers and emerging software standards to enable large scientific challenges to be tackled.

Reduced scaling formulation of CASPT2 analytical gradients using the supporting subspace method

We present a reduced scaling and exact reformulation of state specific complete active space second-order perturbation (CASPT2) analytical gradients in terms of the MP2 and Fock derivatives using the supporting subspace method. This work follows naturally from the supporting subspace formulation of the CASPT2 energy in terms of the MP2 energy using dressed orbitals and Fock builds. For a given active space configuration, the terms corresponding to the MP2-gradient can be evaluated with O(N⁵) operations, while the rest of the calculations can be computed with O(N³) operations using Fock builds, Fock gradients, and linear algebra. When tensor-hyper-contraction is applied simultaneously, the computational cost can be further reduced to O(N⁴) for a fixed active space size. The new formulation enables efficient implementation of CASPT2 analytical gradients by leveraging the existing graphical processing unit (GPU)-based MP2 and Fock routines. We present benchmark results that demonstrate the accuracy and performance of the new method. Example applications of the new method in ab initio molecular dynamics simulation and constrained geometry optimization are given.

Putting Photomechanical Switches to Work: An Ab Initio Multiple Spawning Study of Donor-Acceptor Stenhouse Adducts

Photomechanical switches are light sensitive molecules capable of transducing the energy of a photon into mechanical work via photodynamics. In this Letter, we present the first atomistic investigation of the photodynamics of a novel class of photochromes called donor-acceptor Stenhouse adducts (DASA) using state-of-the-art ab initio multiple spawning interfaced with state-averaged complete active-space self-consistent field theory. Understanding the Z/E photoisomerization mechanism in DASAs at the molecular level is crucial in designing new derivatives with improved photoswitching capabilities. Our dynamics simulations show that the actinic step consists of competing nonradiative relaxation pathways that collectively contribute to DASAs' low (21% in toluene) photoisomerization quantum yield. Furthermore, we highlight the important role the intramolecular hydrogen bond plays in the selectivity of photoisomerization in DASAs, identifying it as a possible structural element to tune DASA properties. Our fully ab initio simulations reveal the key degrees of freedom involved in the actinic step, paving the way for the rational design of new generations of DASAs with improved quantum yield and efficiency.

Ultrafast Spectroscopy of Photoactive Molecular Systems from First Principles: Where We Stand Today and Where We Are Going

Computational spectroscopy is becoming a mandatory tool for the interpretation of the complex, and often congested, spectral maps delivered by modern non-linear multi-pulse techniques. The fields of Electronic Structure Methods, Non-Adiabatic Molecular Dynamics, and Theoretical Spectroscopy represent the three pillars of the virtual ultrafast optical spectrometer, able to deliver transient spectra in silico from first principles. A successful simulation strategy requires a synergistic approach that balances between the three fields, each one having its very own challenges and bottlenecks. The aim of this Perspective is to demonstrate that, despite these challenges, an impressive agreement between theory and experiment is achievable now regarding the modeling of ultrafast photoinduced processes in complex molecular architectures. Beyond that, some key recent developments in the three fields are presented that we believe will have major impacts on spectroscopic simulations in the very near future. Potential directions of development, pending challenges, and rising opportunities are illustrated.

PySpawn: Software for Nonadiabatic Quantum Molecular Dynamics

The ab initio multiple spawning (AIMS) method enables nonadiabatic quantum molecular dynamics simulations in an arbitrary number of dimensions, with potential energy surfaces provided by electronic structure calculations performed on-the-fly. However, the intricacy of the AIMS algorithm complicates software development, deployment on modern shared computer resources, and postsimulation data analysis. PySpawn is a nonadiabatic molecular dynamics software package that addresses these issues. The program is designed to be easily interfaced with electronic structure software, and an interface to the TeraChem software package is described here. PySpawn introduces a task-based reorganization of the AIMS algorithm, allowing fine-grained restart capability and setting the stage for efficient parallelization in a future release. PySpawn includes a user-friendly and interactive Python analysis module that will enable novice users to painlessly adopt AIMS. As a demonstration of PySpawn's simulation capability and analysis module, we report complete active space self-consistent field-based AIMS simulations of the 1,2-dithienyl-1,2-dicyanoethene molecule, a promising molecular photoswitch.

TeraChem: Accelerating electronic structure and ab initio molecular dynamics with graphical processing units

Developed over the past decade, TeraChem is an electronic structure and ab initio molecular dynamics software package designed from the ground up to leverage graphics processing units (GPUs) to perform large-scale ground and excited state quantum chemistry calculations in the gas and the condensed phase. TeraChem's speed stems from the reformulation of conventional electronic structure theories in terms of a set of individually optimized high-performance electronic structure operations (e.g., Coulomb and exchange matrix builds, one- and two-particle density matrix builds) and rank-reduction techniques (e.g., tensor hypercontraction). Recent efforts have encapsulated these core operations and provided language-agnostic interfaces. This greatly increases the accessibility and flexibility of TeraChem as a platform to develop new electronic structure methods on GPUs and provides clear optimization targets for emerging parallel computing architectures.

Multireference Electron Correlation Methods: Journeys along Potential Energy Surfaces

Multireference electron correlation methods describe static and dynamical electron correlation in a balanced way and, therefore, can yield accurate and predictive results even when single-reference methods or multiconfigurational self-consistent field theory fails. One of their most prominent applications in quantum chemistry is the exploration of potential energy surfaces. This includes the optimization of molecular geometries, such as equilibrium geometries and conical intersections and on-the-fly photodynamics simulations, both of which depend heavily on the ability of the method to properly explore the potential energy surface. Because such applications require nuclear gradients and derivative couplings, the availability of analytical nuclear gradients greatly enhances the scope of quantum chemical methods. This review focuses on the developments and advances made in the past two decades. A detailed account of the analytical nuclear gradient and derivative coupling theories is presented. Emphasis is given to the software infrastructure that allows one to make use of these methods. Notable applications of multireference electron correlation methods to chemistry, including geometry optimizations and on-the-fly dynamics, are summarized at the end followed by a discussion of future prospects.

Approximate Analytical Gradients and Nonadiabatic Couplings for the State-Average Density Matrix Renormalization Group Self-Consistent-Field Method

We present an approximate scheme for analytical gradients and nonadiabatic couplings for calculating state-average density matrix renormalization group self-consistent-field wave function. Our formalism follows closely the state-average complete active space self-consistent-field (SA-CASSCF) ansatz, which employs a Lagrangian, and the corresponding Lagrange multipliers are obtained from a solution of the coupled-perturbed CASSCF (CP-CASSCF) equations. We introduce a definition of the matrix product state (MPS) Lagrange multipliers based on a single-site tensor in a mixed-canonical form of the MPS, such that a sweep procedure is avoided in the solution of the CP-CASSCF equations. We apply our implementation to the optimization of a conical intersection in 1,2-dioxetanone, where we are able to fully reproduce the SA-CASSCF result up to arbitrary accuracy.

Conical Intersections at the Nanoscale: Molecular Ideas for Materials

The ability to predict and describe nonradiative processes in molecules via the identification and characterization of conical intersections is one of the greatest recent successes of theoretical chemistry. Only recently, however, has this concept been extended to materials science, where nonradiative recombination limits the efficiencies of materials for various optoelectronic applications. In this review, we present recent advances in the theoretical study of conical intersections in semiconductor nanomaterials. After briefly introducing conical intersections, we argue that specific defects in materials can induce conical intersections between the ground and first excited electronic states, thus introducing pathways for nonradiative recombination. We present recent developments in theoretical methods, computational tools, and chemical intuition for the prediction of such defect-induced conical intersections. Through examples in various nanomaterials, we illustrate the significance of conical intersections for nanoscience. We also discuss challenges facing research in this area and opportunities for progress.

Second-order MCSCF optimization revisited. I. Improved algorithms for fast and robust second-order CASSCF convergence

A new improved implementation of the second-order multiconfiguration self-consistent field optimization method of Werner and Knowles [J. Chem. Phys. 82, 5053 (1985)] is presented. It differs from the original method by more stable and efficient algorithms for minimizing the second-order energy approximation in the so-called microiterations. Conventionally, this proceeds by alternating optimizations of the orbitals and configuration (CI) coefficients and is linearly convergent. The most difficult part is the orbital optimization, which requires solving a system of nonlinear equations that are often strongly coupled. We present a much improved algorithm for solving this problem, using an iterative subspace method that includes part of the orbital Hessian explicitly, and discuss different strategies for performing the uncoupled optimization in a most efficient manner. Second, we present a new solver in which the orbital-CI coupling is treated explicitly. This leads to quadratic convergence of the microiterations but requires many additional evaluations of reduced (transition) density matrices. In difficult optimization problems with a strong coupling of the orbitals and CI coefficients, it leads to much improved convergence of both the macroiterations and the microiterations. Third, the orbital-CI coupling is treated approximately using a quasi-Newton approach with Broyden-Fletcher-Goldfarb-Shanno updates of the orbital Hessian. It is demonstrated that this converges almost as well as the explicitly coupled method but avoids the additional effort for computing many transition density matrices. The performance of the three methods is compared for a set of 21 aromatic molecules, an Fe(ii)-porphine transition metal complex, as well as for the [Cu₂O₂(NH₃)  ₆]²⁺, FeCl₃, Co₂(CO)₆C₂H₂, and Al₄O₂ complexes. In all cases, faster and more stable convergence than with the original implementation is achieved.

Double-buffered, heterogeneous CPU + GPU integral digestion algorithm for single-excitation calculations involving a large number of excited states

The most widely used quantum-chemical models for excited states are single-excitation theories, a category that includes configuration interaction with single substitutions, time-dependent density functional theory, and also a recently developed ab initio exciton model. When a large number of excited states are desired, these calculations incur a significant bottleneck in the "digestion" step in which two-electron integrals are contracted with density or density-like matrices. We present an implementation that moves this step onto graphical processing units (GPUs), and introduce a double-buffer scheme that minimizes latency by computing integrals on the central processing units (CPUs) concurrently with their digestion on the GPUs. An automatic code generation scheme simplifies the implementation of high-performance GPU kernels. For the exciton model, which requires separate excited-state calculations on each electronically coupled chromophore, the heterogeneous implementation described here results in speedups of 2-6× versus a CPU-only implementation. For traditional time-dependent density functional theory calculations, we obtain speedups of up to 5× when a large number of excited states is computed. © 2018 Wiley Periodicals, Inc.

Infrared spectroscopy reveals multi-step multi-timescale photoactivation in the photoconvertible protein archetype dronpa

Photochromic fluorescent proteins play key roles in super-resolution microscopy and optogenetics. The light-driven structural changes that modulate the fluorescence involve both trans-to-cis isomerization and proton transfer. The mechanism, timescale and relative contribution of chromophore and protein dynamics are currently not well understood. Here, the mechanism of off-to-on-state switching in dronpa is studied using femtosecond-to-millisecond time-resolved infrared spectroscopy and isotope labelling. Chromophore and protein dynamics are shown to occur on multiple timescales, from picoseconds to hundreds of microseconds. Following excitation of the trans chromophore, a ground-state primary product is formed within picoseconds. Surprisingly, the characteristic vibrational spectrum of the neutral cis isomer appears only after several tens of nanoseconds. Further fluctuations in protein structure around the neutral cis chromophore are required to form a new intermediate, which promotes the final proton-transfer reaction. These data illustrate the interplay between chromophore dynamics and the protein environment underlying fluorescent protein photochromism.

Understanding Nonradiative Recombination through Defect-Induced Conical Intersections

Defects are known to introduce pathways for the nonradiative recombination of electronic excitations in semiconductors, but implicating a specific defect as a nonradiative center remains challenging for both experiment and theory. In this Perspective, we present recent progress toward this goal involving the identification and characterization of defect-induced conical intersections (DICIs), points of degeneracy between the ground and first excited electronic states of semiconductor materials that arise from the deformation of specific defects. Analysis of DICIs does not require the assumption of weak correlation between the electron and hole nor of stationary nuclei. It is demonstrated that in some cases an energetically accessible DICI is present even when no midgap state is predicted by single-particle theories (e.g., density functional theory). We review recent theoretical and computational developments that enable the location of DICIs in semiconductor nanomaterials and present insights into the photoluminescence of silicon nanocrystals gleaned from DICIs.

α-CASSCF: An Efficient, Empirical Correction for SA-CASSCF To Closely Approximate MS-CASPT2 Potential Energy Surfaces

Because of its computational efficiency, the state-averaged complete active-space self-consistent field (SA-CASSCF) method is commonly employed in nonadiabatic ab initio molecular dynamics. However, SA-CASSCF does not effectively recover dynamical correlation. As a result, there can be qualitative differences between SA-CASSCF potential energy surfaces (PESs) and more accurate reference surfaces computed using multistate complete active space second-order perturbation theory (MS-CASPT2). Here we introduce an empirical correction to SA-CASSCF that scales the splitting between individual states and the state-averaged energy. We call this the α-CASSCF method, and we show here that it significantly improves the accuracy of relative energies and PESs compared with MS-CASPT2 for the chromophores of green fluorescent and photoactive yellow proteins. As such, this method may prove to be quite valuable for nonadiabatic dynamics.