A multifunctional plasmid-encoded replication initiation protein both recruits and positions an active helicase at the replication origin

Cell cycle-coordinated maintenance of the Vibrio bipartite genome

To preserve the integrity of their genome, bacteria rely on several genome maintenance mechanisms that are co-ordinated with the cell cycle. All members of the Vibrio family have a bipartite genome consisting of a primary chromosome (Chr1) homologous to the single chromosome of other bacteria such as Escherichia coli and a secondary chromosome (Chr2) acquired by a common ancestor as a plasmid. In this review, we present our current understanding of genome maintenance in Vibrio cholerae, which is the best-studied model for bacteria with multi-partite genomes. After a brief overview on the diversity of Vibrio genomic architecture, we describe the specific, common, and co-ordinated mechanisms that control the replication and segregation of the two chromosomes of V. cholerae. Particular attention is given to the unique checkpoint mechanism that synchronizes Chr1 and Chr2 replication.

Comparative Genomics of Escherichia coli Serotype O55:H7 Using Complete Closed Genomes

Escherichia coli O55:H7 is a human foodborne pathogen and is recognized as the progenitor strain of E. coli O157:H7. While this strain is important from a food safety and genomic evolution standpoint, much of the genomic diversity of E. coli O55:H7 has been demonstrated using draft genomes. Here, we combine the four publicly available E. coli O55:H7 closed genomes with six newly sequenced closed genomes to provide context to this strain’s genomic diversity. We found significant diversity within the 10 E. coli O55:H7 strains that belonged to three different sequence types. The prophage content was about 10% of the genome, with three prophages common to all strains and seven unique to one strain. Overall, there were 492 insertion sequences identified within the six new sequence strains, with each strain on average containing 75 insertions (range 55 to 114). A total of 31 plasmids were identified between all isolates (range 1 to 6), with one plasmid (pO55) having an identical phylogenetic tree as the chromosome. The release and comparison of these closed genomes provides new insight into E. coli O55:H7 diversity and its ability to cause disease in humans.

Defining a novel domain that provides an essential contribution to site-specific interaction of Rep protein with DNA

An essential feature of replication initiation proteins is their ability to bind to DNA. In this work, we describe a new domain that contributes to a replication initiator sequence-specific interaction with DNA. Applying biochemical assays and structure prediction methods coupled with DNA–protein crosslinking, mass spectrometry, and construction and analysis of mutant proteins, we identified that the replication initiator of the broad host range plasmid RK2, in addition to two winged helix domains, contains a third DNA-binding domain. The phylogenetic analysis revealed that the composition of this unique domain is typical within the described TrfA-like protein family. Both in vitro and in vivo experiments involving the constructed TrfA mutant proteins showed that the newly identified domain is essential for the formation of the protein complex with DNA, contributes to the avidity for interaction with DNA, and the replication activity of the initiator. The analysis of mutant proteins, each containing a single substitution, showed that each of the three domains composing TrfA is essential for the formation of the protein complex with DNA. Furthermore, the new domain, along with the winged helix domains, contributes to the sequence specificity of replication initiator interaction within the plasmid replication origin.

Mechanisms of Theta Plasmid Replication in Enterobacteria and Implications for Adaptation to Its Host

Plasmids are autonomously replicating sequences that help cells adapt to diverse stresses. Theta plasmids are the most frequent plasmid class in enterobacteria. They co-opt two host replication mechanisms: replication at oriC, a DnaA-dependent pathway leading to replisome assembly (theta class A), and replication fork restart, a PriA-dependent pathway leading to primosome assembly through primer extension and D-loop formation (theta classes B, C, and D). To ensure autonomy from the host's replication and to facilitate copy number regulation, theta plasmids have unique mechanisms of replication initiation at the plasmid origin of replication (ori). Tight plasmid copy number regulation is essential because of the major and direct impact plasmid gene dosage has on gene expression. The timing of plasmid replication and segregation are also critical for optimizing plasmid gene expression. Therefore, we propose that plasmid replication needs to be understood in its biological context, where complex origins of replication (redundant origins, mosaic and cointegrated replicons), plasmid segregation, and toxin-antitoxin systems are often present. Highlighting their tight functional integration with ori function, we show that both partition and toxin-antitoxin systems tend to be encoded in close physical proximity to the ori in a large collection of Escherichia coli plasmids. We also propose that adaptation of plasmids to their host optimizes their contribution to the host's fitness while restricting access to broad genetic diversity, and we argue that this trade-off between adaptation to host and access to genetic diversity is likely a determinant factor shaping the distribution of replicons in populations of enterobacteria.

Reconsidering plasmid maintenance factors for computational plasmid design

Plasmids are genetic parasites of microorganisms. The genomes of naturally occurring plasmids are expected to be polished via natural selection to achieve long-term persistence in the microbial cell population. However, plasmid genomes are extremely diverse, and the rules governing plasmid genomes are not fully understood. Therefore, computationally designing plasmid genomes optimized for model and nonmodel organisms remains challenging. Here, we summarize current knowledge of the plasmid genome organization and the factors that can affect plasmid persistence, with the aim of constructing synthetic plasmids for use in gram-negative bacteria. Then, we introduce publicly available resources, plasmid data, and bioinformatics tools that are useful for computational plasmid design.

Replisome Assembly at Bacterial Chromosomes and Iteron Plasmids

The proper initiation and occurrence of DNA synthesis depends on the formation and rearrangements of nucleoprotein complexes within the origin of DNA replication. In this review article, we present the current knowledge on the molecular mechanism of replication complex assembly at the origin of bacterial chromosome and plasmid replicon containing direct repeats (iterons) within the origin sequence. We describe recent findings on chromosomal and plasmid replication initiators, DnaA and Rep proteins, respectively, and their sequence-specific interactions with double- and single-stranded DNA. Also, we discuss the current understanding of the activities of DnaA and Rep proteins required for replisome assembly that is fundamental to the duplication and stability of genetic information in bacterial cells.

Evolved plasmid-host interactions reduce plasmid interference cost

Antibiotic selection drives adaptation of antibiotic resistance plasmids to new bacterial hosts, but the molecular mechanisms are still poorly understood. We previously showed that a broad-host-range plasmid was poorly maintained in Shewanella oneidensis, but rapidly adapted through mutations in the replication initiation gene trfA1. Here we examined if these mutations reduced the fitness cost of TrfA1, and whether this was due to changes in interaction with the host's DNA helicase DnaB. The strains expressing evolved TrfA1 variants showed a higher growth rate than those expressing ancestral TrfA1. The evolved TrfA1 variants showed a lower affinity to the helicase than ancestral TrfA1 and were no longer able to activate the helicase at the oriV without host DnaA. Moreover, persistence of the ancestral plasmid was increased upon overexpression of DnaB. Finally, the evolved TrfA1 variants generated higher plasmid copy numbers than ancestral TrfA1. The findings suggest that ancestral plasmid instability can at least partly be explained by titration of DnaB by TrfA1. Thus under antibiotic selection resistance plasmids can adapt to a novel bacterial host through partial loss of function mutations that simultaneously increase plasmid copy number and decrease unfavorably high affinity to one of the hosts' essential proteins.

Iteron Plasmids

Iteron-containing plasmids are model systems for studying the metabolism of extrachromosomal genetic elements in bacterial cells. Here we describe the current knowledge and understanding of the structure of iteron-containing replicons, the structure of the iteron plasmid encoded replication initiation proteins, and the molecular mechanisms for iteron plasmid DNA replication initiation. We also discuss the current understanding of control mechanisms affecting the plasmid copy number and how host chaperone proteins and proteases can affect plasmid maintenance in bacterial cells.

Choosing a suitable method for the identification of replication origins in microbial genomes

As the replication of genomic DNA is arguably the most important task performed by a cell and given that it is controlled at the initiation stage, the events that occur at the replication origin play a central role in the cell cycle. Making sense of DNA replication origins is important for improving our capacity to study cellular processes and functions in the regulation of gene expression, genome integrity in much finer detail. Thus, clearly comprehending the positions and sequences of replication origins which are fundamental to chromosome organization and duplication is the first priority of all. In view of such important roles of replication origins, tremendous work has been aimed at identifying and testing the specificity of replication origins. A number of computational tools based on various skew types have been developed to predict replication origins. Using various in silico approaches such as Ori-Finder, and databases such as DoriC, researchers have predicted the locations of replication origins sites for thousands of bacterial chromosomes and archaeal genomes. Based on the predicted results, we should choose an effective method for identifying and confirming the interactions at origins of replication. Here we describe the main existing experimental methods that aimed to determine the replication origin regions and list some of the many the practical applications of these methods.

Plasmid replication initiator interactions with origin 13-mers and polymerase subunits contribute to strand-specific replisome assembly

Although the molecular basis for replisome activity has been extensively investigated, it is not clear what the exact mechanism for de novo assembly of the replication complex at the replication origin is, or how the directionality of replication is determined. Here, using the plasmid RK2 replicon, we analyze the protein interactions required for Escherichia coli polymerase III (Pol III) holoenzyme association at the replication origin. Our investigations revealed that in E. coli, replisome formation at the plasmid origin involves interactions of the RK2 plasmid replication initiation protein (TrfA) with both the polymerase β- and α-subunits. In the presence of other replication proteins, including DnaA, helicase, primase and the clamp loader, TrfA interaction with the β-clamp contributes to the formation of the β-clamp nucleoprotein complex on origin DNA. By reconstituting in vitro the replication reaction on ssDNA templates, we demonstrate that TrfA interaction with the β-clamp and sequence-specific TrfA interaction with one strand of the plasmid origin DNA unwinding element (DUE) contribute to strand-specific replisome assembly. Wild-type TrfA, but not the TrfA QLSLF mutant (which does not interact with the β-clamp), in the presence of primase, helicase, Pol III core, clamp loader, and β-clamp initiates DNA synthesis on ssDNA template containing 13-mers of the bottom strand, but not the top strand, of DUE. Results presented in this work uncovered requirements for anchoring polymerase at the plasmid replication origin and bring insights of how the directionality of DNA replication is determined.

RK2 plasmid dynamics in Caulobacter crescentus cells--two modes of DNA replication initiation

Undisturbed plasmid dynamics is required for the stable maintenance of plasmid DNA in bacterial cells. In this work, we analysed subcellular localization, DNA synthesis and nucleoprotein complex formation of plasmid RK2 during the cell cycle of Caulobacter crescentus. Our microscopic observations showed asymmetrical distribution of plasmid RK2 foci between the two compartments of Caulobacter predivisional cells, resulting in asymmetrical allocation of plasmids to progeny cells. Moreover, using a quantitative PCR (qPCR) method, we estimated that multiple plasmid particles form a single fluorescent focus and that the number of plasmids per focus is approximately equal in both swarmer and predivisional Caulobacter cells. Analysis of the dynamics of TrfA-oriV complex formation during the Caulobacter cell cycle revealed that TrfA binds oriV primarily during the G1 phase, however, plasmid DNA synthesis occurs during the S and G2 phases of the Caulobacter cell cycle. Both in vitro and in vivo analysis of RK2 replication initiation in C. crescentus cells demonstrated that it is independent of the Caulobacter DnaA protein in the presence of the longer version of TrfA protein, TrfA-44. However, in vivo stability tests of plasmid RK2 derivatives suggested that a DnaA-dependent mode of plasmid replication initiation is also possible.

Roles of long and short replication initiation proteins in the fate of IncP-1 plasmids

Broad-host-range IncP-1 plasmids generally encode two replication initiation proteins, TrfA1 and TrfA2. TrfA2 is produced from an internal translational start site within trfA1. While TrfA1 was previously shown to be essential for replication in Pseudomonas aeruginosa, its role in other bacteria within its broad host range has not been established. To address the role of TrfA1 and TrfA2 in other hosts, efficiency of transformation, plasmid copy number (PCN), and plasmid stability were first compared between a mini-IncP-1β plasmid and its trfA1 frameshift variant in four phylogenetically distant hosts: Escherichia coli, Pseudomonas putida, Sphingobium japonicum, and Cupriavidus necator. TrfA2 was sufficient for replication in these hosts, but the presence of TrfA1 enhanced transformation efficiency and PCN. However, TrfA1 did not contribute to, and even negatively affected, long-term plasmid persistence. When trfA genes were cloned under a constitutive promoter in the chromosomes of the four hosts, strains expressing either both TrfA1 and TrfA2 or TrfA1 alone, again, generally elicited a higher PCN of an IncP1-β replicon than strains expressing TrfA2 alone. When a single species of TrfA was produced at different concentrations in E. coli cells, TrfA1 maintained a 3- to 4-fold higher PCN than TrfA2 at the same TrfA concentrations, indicating that replication mediated by TrfA1 is more efficient than that by TrfA2. These results suggest that the broad-host-range properties of IncP-1 plasmids are essentially conferred by TrfA2 and the intact replication origin alone but that TrfA1 is nonetheless important to efficiently establish plasmid replication upon transfer into a broad range of hosts.

AT-rich region and repeated sequences - the essential elements of replication origins of bacterial replicons

Repeated sequences are commonly present in the sites for DNA replication initiation in bacterial, archaeal, and eukaryotic replicons. Those motifs are usually the binding places for replication initiation proteins or replication regulatory factors. In prokaryotic replication origins, the most abundant repeated sequences are DnaA boxes which are the binding sites for chromosomal replication initiation protein DnaA, iterons which bind plasmid or phage DNA replication initiators, defined motifs for site-specific DNA methylation, and 13-nucleotide-long motifs of a not too well-characterized function, which are present within a specific region of replication origin containing higher than average content of adenine and thymine residues. In this review, we specify methods allowing identification of a replication origin, basing on the localization of an AT-rich region and the arrangement of the origin's structural elements. We describe the regularity of the position and structure of the AT-rich regions in bacterial chromosomes and plasmids. The importance of 13-nucleotide-long repeats present at the AT-rich region, as well as other motifs overlapping them, was pointed out to be essential for DNA replication initiation including origin opening, helicase loading and replication complex assembly. We also summarize the role of AT-rich region repeated sequences for DNA replication regulation.

Replication initiation at the Escherichia coli chromosomal origin

To initiate DNA replication, DnaA recognizes and binds to specific sequences within the Escherichia coli chromosomal origin (oriC), and then unwinds a region within oriC. Next, DnaA interacts with DnaB helicase in loading the DnaB-DnaC complex on each separated strand. Primer formation by primase (DnaG) induces the dissociation of DnaC from DnaB, which involves the hydrolysis of ATP bound to DnaC. Recent evidence indicates that DnaC acts as a checkpoint in the transition from initiation to the elongation stage of DNA replication. Freed from DnaC, DnaB helicase unwinds the parental duplex DNA while interacting the cellular replicase, DNA polymerase III holoenzyme, and primase as it intermittently forms primers that are extended by the replicase in duplicating the chromosome.

Shifts in the host range of a promiscuous plasmid through parallel evolution of its replication initiation protein

The ability of bacterial plasmids to adapt to novel hosts and thereby shift their host range is key to their long-term persistence in bacterial communities. Promiscuous plasmids of the incompatibility group P (IncP)-1 can colonize a wide range of hosts, but it is not known if and how they can contract, shift or further expand their host range. To understand the evolutionary mechanisms of host range shifts of IncP-1 plasmids, an IncP-1β mini-replicon was experimentally evolved in four hosts in which it was initially unstable. After 1000 generations in serial batch cultures under antibiotic selection for plasmid maintenance (kanamycin resistance), the stability of the mini-plasmid dramatically improved in all coevolved hosts. However, only plasmids evolved in Shewanella oneidensis showed improved stability in the ancestor, indicating that adaptive mutations had occurred in the plasmid itself. Complete genome sequence analysis of nine independently evolved plasmids showed seven unique plasmid genotypes that had various kinds of single mutations at one locus, namely, the N-terminal region of the replication initiation protein TrfA. Such parallel evolution indicates that this region was under strong selection. In five of the seven evolved plasmids, these trfA mutations resulted in a significantly higher plasmid copy number. Evolved plasmids were found to be stable in four other naive hosts, but could no longer replicate in Pseudomonas aeruginosa. This study shows that plasmids can specialize to a novel host through trade-offs between improved stability in the new host and the ability to replicate in a previously permissive host.

Conformation of a plasmid replication initiator protein affects its proteolysis by ClpXP system

Proteins from the Rep family of DNA replication initiators exist mainly as dimers, but only monomers can initiate DNA replication by interaction with the replication origin (ori). In this study, we investigated both the activation (monomerization) and the degradation of the broad-host-range plasmid RK2 replication initiation protein TrfA, which we found to be a member of a class of DNA replication initiators containing winged helix (WH) domains. Our in vivo and in vitro experiments demonstrated that the ClpX-dependent activation of TrfA leading to replicationally active protein monomers and mutations affecting TrfA dimer formation, result in the inhibition of TrfA protein degradation by the ClpXP proteolytic system. These data revealed that the TrfA monomers and dimers are degraded at substantially different rates. Our data also show that the plasmid replication initiator activity and stability in E. coli cells are affected by ClpXP system only when the protein sustains dimeric form.

Early Events in the Binding of the pPS10 Replication Protein RepA to Single Iteron and Operator DNA Sequences

RepA protein, encoded in the Pseudomonas pPS10 replicon, is a stable dimer in solution (dRepA), acting as a self-repressor of repA transcription through binding to an inverted repeat operator. However, RepA monomers (mRepA) are required to initiate plasmid replication upon binding to four directly repeated DNA sequences (iterons). RepA is composed of two winged-helix (WH) domains: C-terminal WH2 is the main DNA-binding domain (DBD) for both target sequences, whereas N-terminal WH1 acts as dimerization interface in dRepA, but becomes a second DBD in mRepA. On the basis of CD spectroscopy, hydrodynamics, X-ray crystallography and model building studies, we proposed previously that the activation of RepA initiator implies a large structural change in WH1, coupled to protein monomerization and interdomain compaction. Here, we report novel features in the process. Binding curves of RepA to an iteron, followed by fluorescence anisotropy in solution and by surface plasmon resonance on immobilized DNA, exhibit the profiles characteristic of transitions between three states. In contrast, RepA-R93C, a monomeric activated mutant, exhibits a single binding transition. This suggests the presence of an intermediate species in the iteron-induced dissociation and structural transformation of RepA. High concentrations of bovine serum albumin or ovalbumin (macromolecular crowding) enhance RepA affinity for an iteron in solution and, in gel mobility-shift assays, result in the visualization of novel protein-DNA complexes. RepA-induced DNA bending requires the binding of two WH domains: either both WH2 in dimers (operator) or WH1 plus WH2 in monomers (iteron).

IncP-9 replication initiator protein binds to multiple DNA sequences in oriV and recruits host DnaA protein

The minimal replicon from IncP-9 plasmid pM3, consisting of oriV and rep, is able to replicate in Pseudomonas putida but not in Escherichia coli, unless production of Rep protein is increased. The Rep protein, at 20kDa, is the smallest replication protein so far identified for a theta replicating plasmid. Rep was purified and shown to bind in three blocks across the oriV region that do not correlate with a single unique binding sequence. The block closest to rep is not necessary for oriV function. Rep forms at least two types of complex--one rendering the DNA entirely resistant to cleavage, the other occupying one side of the helix. No short segment of oriV showed the same affinity for Rep as the whole of oriV. The oriV region did not bind purified DnaA from E. coli, P. putida or P. aeruginosa but when Rep was present also, super-shifts were found with DnaA in a sequence-specific manner. Scrambling of the primary candidate DnaA box did not inactivate oriV but did increase the level of Rep required to activate oriV. The general pattern of Rep-DNA recognition sequences in oriV indicates that the IncP-9 system falls outside of the paradigms of model plasmids that have been well-studied to date.

Bacteriophage replication modules

Bacteriophages (prokaryotic viruses) are favourite model systems to study DNA replication in prokaryotes, and provide examples for every theoretically possible replication mechanism. In addition, the elucidation of the intricate interplay of phage-encoded replication factors with 'host' factors has always advanced the understanding of DNA replication in general. Here we review bacteriophage replication based on the long-standing observation that in most known phage genomes the replication genes are arranged as modules. This allows us to discuss established model systems--f1/fd, phiX174, P2, P4, lambda, SPP1, N15, phi29, T7 and T4--along with those numerous phages that have been sequenced but not studied experimentally. The review of bacteriophage replication mechanisms and modules is accompanied by a compendium of replication origins and replication/recombination proteins (available as supplementary material online).

Characterization of the theta-type plasmid pCD3.4 from Carnobacterium divergens, and modulation of its host range by RepA mutation

The complete nucleotide sequence of the 3475 bp plasmid pCD3.4 from Carnobacterium divergens LV13, which encodes the bacteriocin divergicin A, was determined. Nucleotide sequence, deletion and complementation analyses revealed the presence of a trans-acting replication protein, RepA, and DNA sequences involved in plasmid replication and copy-number control. The DNA region preceding the repA gene probably contains the origin of replication. This sequence includes four and a half direct repeats (iterons) of 22 bp, to which RepA is thought to bind, and an AT-rich region containing a 12 bp repeat, at which initiation of DNA might occur. Further upstream of this sequence resides a fifth iteron required for optimal plasmid replication. The RepA protein shows homology to replication proteins of the pUCL287 subfamily of theta-type replicons. Two ORFs were found downstream of the repA gene that could be deleted without affecting replication and stability of the plasmid. pCD3.4 has a narrow host range, and could only be maintained in Carnobacterium spp.; however, a mutant of the plasmid was obtained that enabled the pCD3.4 replicon to replicate in Enterococcus faecium, but not in Carnobacterium spp. The mutation was located in the C-terminal region of the RepA protein, changing a proline into a serine. This is believed to be the first example of such plasmid-host-range modulation in Gram-positive bacteria.

Positioning and the specific sequence of each 13-mer motif are critical for activity of the plasmid RK2 replication origin

The minimal replication origin of the broad-host-range plasmid RK2, oriV, contains five iterons which are binding sites for the plasmid-encoded replication initiation protein TrfA, four DnaA boxes, which bind the host DnaA protein, and an AT-rich region containing four 13-mer sequences. In this study, 26 mutants with altered sequence and/or spacing of 13-mer motifs have been constructed and analysed for replication activity in vivo and in vitro. The data show that the replacement of oriV 13-mers by similar but not identical 13-mer sequences from Escherichia coli oriC inactivates the origin. In addition, interchanging the positions of the oriV 13-mers results in greatly reduced activity. Mutants with T/A substitutions are also inactive. Furthermore, introduction of single-nucleotide substitutions demonstrates very restricted sequence requirements depending on the 13-mer position. Only two of the mutants are host specific, functional in Pseudomonas aeruginosa but not in E. coli. Our experiments demonstrate considerable complexity in the plasmid AT-rich region architecture required for functionality. It is evident that low internal stability of this region is not the only feature contributing to origin activity. Our studies suggest a requirement for sequence-specific protein interactions within the 13-mers during assembly of replication complexes at the plasmid origin.

Mechanisms of, and barriers to, horizontal gene transfer between bacteria

Bacteria evolve rapidly not only by mutation and rapid multiplication, but also by transfer of DNA, which can result in strains with beneficial mutations from more than one parent. Transformation involves the release of naked DNA followed by uptake and recombination. Homologous recombination and DNA-repair processes normally limit this to DNA from similar bacteria. However, if a gene moves onto a broad-host-range plasmid it might be able to spread without the need for recombination. There are barriers to both these processes but they reduce, rather than prevent, gene acquisition.

Ability of IncP-9 plasmid pM3 to replicate in Escherichia coli is dependent on both rep and par functions

IncP-9 plasmids are common in Pseudomonas species and can be transferred to other Gram-negative eubacteria but tend not to be stably maintained outside their natural host genus. A 1.3 kb ori V-rep fragment from IncP-9 plasmid pM3 was sufficient for autonomous replication in Pseudomonas putida but not in Escherichia coli. Replication of ori V-rep in E. coli was restored when additional rep was provided in trans, suggesting that the replication defect resulted from insufficient rep expression from its natural promoter. A promoter deficiency in E. coli was confirmed by reporter gene assays, transcriptional start point mapping and mutation of the promoter recognition elements. Dissection of the pM3 mini-replicon, pMT2, showed that this replication deficiency in E. coli is suppressed by additional determinants from its par operon: ParB, which can be supplied in trans, and its target, the par operon promoter, required in cis to ori V-rep. We propose that ParB binding to its target either changes plasmid DNA and thus promoter conformation or by spreading or looping contacts RNAP at the rep promoter so that rep expression is sufficient to activate ori V.

Plasmid host-range: restrictions to F replication in Pseudomonas

Host-range, a fundamental property of a bacterial plasmid, is primarily determined by the plasmid replication system. To investigate the basis of the restricted host-range of the well-studied F-plasmid of Escherichia coli, we characterized in vitro the interactions of the host DnaA initiation protein and DnaB helicase from Pseudomonas aeruginosa and Pseudomonas putida with the replication origin, oriS, and initiation protein, RepE, of the RepFIA replicon. The results presented here show that a pre-priming complex can form at the F-origin with the replication proteins from the non-native hosts in the presence of RepE. However, RepE cannot form a stable complex with DnaB of P. aeruginosa or P. putida but does stably interact with E. coli DnaB. This unstable association may affect the ability of F to replicate in Pseudomonas. In addition, replication studies in vivo suggest that inefficient expression of the RepE initiation protein from its native promoter in Pseudomonas is a factor in restricting its host-range. This, however, is not the only barrier to F replication, as mini-F derivatives with an alternative promoter for RepE expression do not replicate in P. putida and are not stably maintained in P. aeruginosa.

Survey of the year 2003 commercial optical biosensor literature

In the year 2003 there was a 17% increase in the number of publications citing work performed using optical biosensor technology compared with the previous year. We collated the 962 total papers for 2003, identified the geographical regions where the work was performed, highlighted the instrument types on which it was carried out, and segregated the papers by biological system. In this overview, we spotlight 13 papers that should be on everyone's 'must read' list for 2003 and provide examples of how to identify and interpret high-quality biosensor data. Although we still find that the literature is replete with poorly performed experiments, over-interpreted results and a general lack of understanding of data analysis, we are optimistic that these shortcomings will be addressed as biosensor technology continues to mature.

Twenty years of the pPS10 replicon: insights on the molecular mechanism for the activation of DNA replication in iteron-containing bacterial plasmids

This review focuses on the contributions of the Pseudomonas replicon pPS10 to understanding the initiation of DNA replication in iteron-containing plasmids from Gram-negative bacteria. Dimers of the pPS10 initiator protein (RepA) repress repA transcription by binding to the two halves of an inverted repeat operator. RepA monomers are the active initiator species that bind to four directly repeated sequences (iterons). pPS10 initiator was the first Rep protein whose domains were defined (two "winged-helix," WH modules) and their binding sites were identified at each half of the iteron repeat. This was confirmed by the crystal structure of the monomer of a homologous initiator (RepE from F plasmid) bound to iteron DNA. The recently solved structure of the dimeric N-terminal domain (WH1) of pPS10 RepA, when compared to the RepE monomer, shows that upon dimer dissociation an alpha-helix at WH1 C-terminus becomes part of an interdomain beta-sheet. In solution, the iteron sequence, by itself, can induce the same kind of structural transformation in RepA. This seems to alter the package of both WH domains to adapt their DNA reading heads (HTH motifs) to the distinct spacing between half repeats in iterons and operator. Based on biochemical and spectroscopic work, structural and functional similarities were proposed between RepA and archaeal/eukaryal initiators. This was independently confirmed by the crystal structure of the archaeal initiator Cdc6. Characterization of mutants, either in pPS10 or in the Escherichia coli chromosome, has provided some evidence on a WH1-mediated interaction between RepA and the chromosomal initiator DnaA that results in a broadened-host range.

Biochemical investigations of control of replication initiation of plasmid R6K

The mechanistic basis of control of replication initiation of plasmid R6K was investigated by addressing the following questions. What are the biochemical attributes of mutations in the pi initiator protein that caused loss of negative control of initiation? Did the primary control involve only initiator protein-ori DNA interaction or did it also involve protein-protein interactions between pi and several host-encoded proteins? Mutations at two different regions of the pi-encoding sequence individually caused some loss of negative control as indicated by a relatively modest increase in copy number. However, combinations of the mutation P42L, which caused loss of DNA looping, with those located in the region between the residues 106 and 113 induced a robust enhancement of copy number. These mutant forms promoted higher levels of replication in vitro in a reconstituted system consisting of 22 purified proteins. The mutant forms of pi were susceptible to pronounced iteron-induced monomerization in comparison with the WT protein. As contrasted with the changes in DNA-protein interaction, we found no detectable differences in protein-protein interaction between wild type pi with DnaA, DnaB helicase, and DnaG primase on one hand and between the high copy mutant forms and the same host proteins on the other. The DnaG-pi interaction reported here is novel. Taken together, the results suggest that both loss of negative control due to iteron-induced monomerization of the initiator and enhanced iteron-initiator interaction appear to be the principal causes of enhanced copy number.

A specific region in the N terminus of a replication initiation protein of plasmid RK2 is required for recruitment of Pseudomonas aeruginosa DnaB helicase to the plasmid origin

Broad host range plasmid RK2 encodes two versions of its essential replication initiation protein, TrfA, using in-frame translational starts spaced 97 amino acids apart. The smaller protein, TrfA-33, is sufficient for plasmid replication in many bacterial hosts. Efficient replication in Pseudomonas aeruginosa, however, specifically requires the larger TrfA-44 protein. With the aim of identifying sequences of TrfA-44 required for stable replication of RK2 in P. aeruginosa, specific deletions and a substitution mutant within the N terminus sequence unique to TrfA-44 were constructed, and the mutant proteins were tested for activity. Deletion mutants were targeted to three of the four predicted helical regions in the first 97 amino acids of TrfA-44. Deletion of TrfA-44 amino acids 21-32 yielded a mutant protein, TrfA-44Delta2, that had lost the ability to bind and load the DnaB helicase of P. aeruginosa or Pseudomonas putida onto the RK2 origin in vitro and did not support stable replication of an RK2 mini-replicon in P. aeruginosa in vivo. A substitution of amino acid 22 within this essential region resulted in a protein, TrfA-44E22A, with reduced activity in vitro, particularly with the P. putida helicase. Deletion of amino acids 37-55 (TrfA-44Delta3) slightly affected protein activity in vitro with the P. aeruginosa helicase and significantly with the P. putida helicase, whereas deletion of amino acids 71-88 (TrfA-44Delta4) had no effect on TrfA activity in vitro with either helicase. These results identify regions of the TrfA-44 protein that are required for recruitment of the Pseudomonas DnaB helicases in the initiation of RK2 replication.