Crystallinity engineering for overcoming the activity-stability tradeoff of spinel oxide in Fenton-like catalysis

Constructing zinc defects in zinc oxide and interface-anchoring of tricobalt tetraoxide: Modulating d-band center for efficient peroxymonosulfate activation

Heterojunction catalysts with defects are effective for electron transfer and peroxymonosulfate (PMS) activation. In this study, a Zn vacancy-rich ZnO/Co3O4 (Zn1-xO/Co3O4) catalyst featuring Zn-O-Co interfacial bonds was synthesized with Zn1-xO as a matrix. Its ability to activate PMS for the degradation of ciprofloxacin (CIP) was investigated. The Zn1-xO/Co3O4 achieved nearly complete CIP degradation within 20  min under 17 W sterilamp irradiation. The normalization kinetic constant was 21.7 min-1 M-1, which is 7.2 times higher than that of ZnO. Experimental results and theoretical calculations demonstrated that the Zn vacancy and Co species synergistically enhanced PMS adsorption. The incorporation of Co facilitated the desorption of adsorbed species from the Zn site by lowering the d-band center and promoted electron transfer to PMS. Sterilamp irradiation facilitated the generation of active radicals. The catalyst exhibited high CIP degradation ratios in the continuous-flow experiment, with over 90 % of CIP degraded within 180 min. This study presents a novel approach to enhance the catalytic activity of ZnO for pollutants degradation.

Mesoporous Single-Crystal High-Entropy Alloy

Mesoporous high-entropy alloys (HEAs) represent a promising advancement in mesoporous metals, showing great potential for various applications. Their unique multi-metallic uniformity, strong structural features, and high surface-active-site exposure contribute to their practical catalytic ability. The catalytic efficiency of metal nanostructures depends on both their elemental compositions and crystallinity, with single-crystalline structures generally outperforming polycrystalline ones. However, synthesizing single-crystalline HEA nanostructures with defined mesoporosity remains challenging due to the complex fabrication process. This study introduces a block copolymer micelle-assisted soft-chemical strategy to create single-crystalline mesoporous HEAs (SCPHEAs). These structures feature uniformly sized mesopores that permeate the entire structure, maximizing the exposure of HEA active sites, enhancing material utilization, and facilitating efficient mass and charge transport. The optimized SCPHEAs exhibit excellent electrocatalytic performance in methanol oxidation reactions, surpassing polycrystalline mesoporous HEAs, commercial Pt-C, and various recently reported precious metal-based HEAs and conventional alloy electrocatalysts. This superior performance is attributed to a synergistic effect that results from surface charge redistribution among different atomic entities, which enhances the adsorption of methanol and water molecules and mitigates intermediate CO poisoning. Our synthesis method enables the design of a wide range of mesoporous HEAs with controllable morphology and crystallinity tailored for various catalytic applications and beyond.

Leveraging Polaron Effect for Solar-Driven Efficient Peroxymonosulfate Activation in Water Purification

Peroxymonosulfate (PMS) represents a promising advanced oxidation technique for the treatment of refractory pollutants; however, its application is limited by high costs resulting from excessive usage due to low activation efficiency. In this study, we formulated a sunlight-driven Cu1-Ov/TiO2 catalyst with surface electron polaron sites to activate PMS for the degradation of contaminants, achieving a record reaction rate of k = 2.998 min-1 even with a low PMS dosage of 0.3 mM. The adsorption process and electron transfer kinetics were significantly enhanced with surface polaron sites in Cu1-Ov/TiO2, which facilitated the activation of PMS and increased the reaction rate constant k by 29.1 times compared with that of TiO2/PMS under illumination. Additionally, we verified that light irradiation promotes transfer from the non-free-radical pathway to the efficient free-radical pathway in mechanism of PMS activation. Our designed sunlight-driven flow-through PMS setup achieves a removal rate exceeding 90% for 7 days of outdoor operation at 3.2 × 102 L m-2 h-1, the feasibility of which is further proven in regions around the world by analysis of solar intensity. This study presents a demonstration of economical PMS application in water purification worldwide, with an estimated cost of 0.135 $ m-3.

Regulation of Surface Terminal Hydroxyl Coverage of FeOCl Catalyst via Crystal Facet Protection for Enhanced H2O2 Activation

The unique Fe coordination environment in the FeOCl catalyst confers superior reducible electronic properties, rendering them attractive Fenton-like active sites. DFT calculations reveal that the U-shaped coordinated Fe sites formed with 50% terminal hydroxyl coverage exhibit the best H2O2 activation performance, which allows the adsorbed H2O2 to form a ·OH directly with much lower activation energy. Herein, a crystal facet protection strategy induced by rapid high-temperature annealing is developed to synthesize FeOCl with high exposure of Fe atoms while regulating the surface hydroxyl coverage. The dominant expression of the (021) facet resulted in an optimized surface terminal hydroxyl coverage of 58.3%, increasing the intrinsic activity of FeOCl by 4.3 times. The d-band center of FeOCl with optimized terminal hydroxyl coverage is closer to the Fermi level, thus exhibiting higher affinity for H2O2, and the increased amount of U-shaped coordinated Fe sites enables sufficient ·OH generation for enhanced decontamination performance. Since the terminal hydroxyl groups can be consumed by Ca2+ and Mg2+ through coprecipitation, preremoving the hardness of actual wastewater is indispensable in the application of the FeOCl/H2O2 system. Our finding provides a new way to improve the intrinsic activity of FeOCl catalyst, which is helpful for its application in other environmental remediations.

Site-Specific Spin State Modulation in Spinel Oxides for Enhanced Nonradical Oxidation

Spinel oxides hold tremendous potential for driving advanced oxidation processes, yet the underlying mechanism for maximizing their activity remains unclear. In this study, we leverage tetrahedral and octahedral site interactions in MnxCo3-xO4 to modulate the spin states, specifically spin alignment and spin moment, thereby enhancing periodate (PI) activation and catalytic performance in contaminant degradation. Through combined experimental and density functional theory (DFT) analyses, we elucidate the role of spin alignment at synergetic tetrahedral and octahedral sites in facilitating quantum spin exchange interactions (QSEI) with an efficient electronic spin channel for charge transfer. Meanwhile, the engineered high spin configuration in CoMn2O4 raises the d-band center, favoring stable PI* surface complex formation and accelerating the rate-determining desorption of IO3 - with a lower-ICOHP value during the catalytic degradation of ciprofloxacin. As a result, the fine-tuned spin state of CoMn2O4 leads to enhanced overall reaction kinetics, with a 2.5-fold increase compared to MnCo2O4 and up to 22-fold increase compared to the octahedrally-active only catalysts. Such a site-specific modulation has been found applicable to other spinel oxides, enlightening fine-tuned electronic structure for maximizing catalytic performance.

Synchronization Strategy for Activity and Stability in Fenton-Like Single-Atom Catalysis

Single-atom catalysts (SACs) have garnered significant attention in the applications of environmental remediation based on Fenton-like systems. Current research on Fenton-like single-atom catalysis often emphasizes catalytic activity and mechanism regulation, while paying limited attention to the simultaneous enhancement of both activity and stability-a critical factor for the practical and scale-up applications of SACs. This review systematically summarizes recent advances in synchronization strategies for improving the activity and stability of Fenton-like single-atom catalysis, with a focus on the design principles and mechanisms of four key strategies: coordination engineering, confinement effects, carrier substitution, and catalytic module design. To the best of knowledge, this represents the first comprehensive review of Fenton-like single-atom catalysis from the perspective of concurrent optimization of activity and stability. Additionally, the auxiliary role of machine learning and lifecycle assessment (LCA) is evaluated in advancing these synchronization strategies. By investigating the interplay among different support materials, coordination configurations, and reaction environments, as well as enlarged modules, key factors governing the stability/activity of SACs are highlighted, and future directions are proposed for developing next-generation catalysts with high efficiency and long-term durability for practical environmental remediation.

Data-Driven Accelerated Discovery Coupled with Precise Synthesis of Single-Atom Catalysts for Robust and Efficient Water Purification

The development of advanced catalysts frequently employs trial-and-error methods and is lack of highly controlled synthesis, resulting in unsatisfactory development efficiency and performance. Here we propose a data-driven prediction coupled with precise synthesis strategy to accelerate the development of single-atom catalysts (SACs) for efficient water purification. The data-driven approach enables the rapid screening and prediction of high-performance SACs from 43 metals-N4 structures comprising transition and main group metal elements, followed by validation and structural modulation for improved performance through a highly controllable hard-template method. Impressively, a well-designed Fe-SAC with a high loading of Fe-pyridine-N4 sites (~3.83 wt %) and highly mesoporous structure, exhibits ultra-high decontamination performance (rate constant of 100.97 min-1 g-2), representing the best Fenton-like activities for sulfonamide antibiotics to date. Furthermore, the optimized Fe-SAC shows excellent robust environmental resistance and cyclic stability with almost 100 % degradation efficiency of sulfonamide antibiotics for 100-h continuous operation. Density functional theory calculations reveal that Fe-pyridine-N4 sites can reduce the energy barrier of intermediate O* formation, the rate-determining step, resulting in highly selective generation of singlet oxygen. The integration of data-driven method with precise synthesis strategy provides a novel paradigm for the rapid development of high-performance catalysts for environmental field as well as other important fields including sustainable energy and catalysis.

Proton-coupled electron transfer controls peroxide activation initiated by a solid-water interface

Decentralized water treatment technologies, designed to align with the specific characteristics of the water source and the requirements of the user, are gaining prominence due to their cost and energy-saving advantages over traditional centralized systems. The application of chemical water treatment via heterogeneous advanced oxidation processes using peroxide (O-O) represents a potentially attractive treatment option. These processes serve to initiate redox processes at the solid-water interface. Nevertheless, the oxidation mechanism exemplified by the typical Fenton-like persulfate-based heterogeneous oxidation, in which electron transfer dominates, is almost universally accepted. Here, we present experimental results that challenge this view. At the solid-liquid interface, it is demonstrated that protons are thermodynamically coupled to electrons. In situ quantitative titration provides direct experimental evidence that the coupling ratio of protons to transferred electrons is almost 1:1. Comprehensive thermodynamic analyses further demonstrate that a net proton-coupled electron transfer occurs, with both protons and electrons entering the redox cycle. These findings will inform future developments in O-O activation technologies, enabling more efficient redox activity via the tight coupling of protons and electrons.

ZIF-Derived Catalyst with Co-Co/Co-N Dual Active Sites for Boosting Mixed Pathway Decontamination in Fenton-like Catalysis

Pollutant degradation via radical-nonradical mixed pathways offers opportunities to break the reactivity-stability trade-off in heterogeneous Fenton-like catalysis for water treatment; however, a precise catalyst design to enforce such mixed pathways remains challenging. Herein, by using bimetallic ZIFs as the precursor, we fabricated a cobalt (Co)-based catalyst (Co0.75Zn0.25-NC) with dual active sites for peroxymonosulfate (PMS) activation, where the Co-Co site and Co-N site preferentially catalyze the sulfate radicals and single oxygen generation, respectively. The system exhibited superior pollutant degradation activity, especially for the lectron-rich pollutants like tetracycline, high PMS utilization efficiency, negligible interference by the complicated water matrix, and good adaptation to broad pH and water quality conditions. A stable operation of the corresponding catalytic ceramic membrane was also demonstrated, achieving ∼70% pollutant removal during the long-term continuous-flow operation. This work offers valuable references to guide the Fenton-like catalyst design toward sustainable and low-carbon water purification applications.

Accelerated arsenic decontamination using graphene oxide-supported metal-organic framework nanoconfined membrane for sustainable performance

Developing highly efficient bimetallic metal-organic frameworks (MOFs) as catalysts for Fenton-like reactions holds significant promise for decontamination processes. Although MOFs with excellent decontamination capabilities are achievable, ensuring their long-term stability, especially in the organoarsenic harmless treatment, remains a formidable challenge. Herein, we proposed a unique nanoconfinement strategy using graphene oxide (GO)-supported Prussian blue analogs (PBA) as catalytic membrane, which modulated the peroxymonosulfate (PMS) activation in p-arsanilic acid (p-ASA) degradation from traditional radical pathways to a synergy of both radical and non-radical pathways. This dual-pathway activation with sulfate radicals (SO4•-) and singlet oxygen (1O2) was a significant advancement, ensuring the exceptionally high reactivity and stability for over 80 h of continuous membrane operation. The PBA@GO membrane achieved a degradation rate constant of 0.79 ms-1, with an increase of four orders of magnitude compared to the nonconfined PBA@GO composites, while ensuring comprehensive arsenic removal ensuring comprehensive arsenic removal and demonstrating remarkably efficient total organic carbon elimination (92.2 % versus 57.6 % in 20 min). The PBA@GO membrane also showed excellent resistance towards inorganic ions, humic acid, and complex water matrices. This facile and universal strategy paves the way for the fabrication of MOFs-based catalytic membranes for optimizing performance in arsenic pollution treatment.

Confinement-Modulated Singlet-Oxygen Nanoreactors for Water Decontamination

Water decontamination with singlet oxygen (1O2) has shown advantages over the traditional radical-based treatment processes, which are frequently inhibited by the background inorganic/organic substances and produce toxic byproducts. However, earlier reported treatment systems mostly suffer from side reactions against efficient and cost-effective production of 1O2, together with insufficient utilization of 1O2 limited by the extremely short diffusion length. To overcome the drawbacks, we here designed high-performance nanoreactors by modulating the MnO2 phase to nanotube structures (with ∼5 nm diameter, termed "NT5"). With nanoconfinement, our developed NT5 directed efficient and almost 100% utilization of peroxymonosulfate (PMS) to produce 1O2 and achieved maximal kinetics on organic pollutant elimination. The mechanism study revealed that the geometric strain of NT5 together with spatial confinement modulated the adsorption properties of PMS molecules and led to their transformation to 1O2. To demonstrate the applicability of NT5, we developed a reactive filter with a particulate catalyst (NT5 grown on an alumina substrate) that can effectively and stably work in a broad range of contaminated scenarios (surface water, groundwater, municipal secondary effluent, and industrial wastewaters), due to the confined treatment together with the fouling-resistance nature. Our study may boost the deployment of nanomaterials with confined catalysis and their applications in practical water treatment scenarios.

An S-Scheme MOF-on-MXene Heterostructure for Enhanced Photocatalytic Periodate Activation

Fully understanding the periodate (PI) activation system is still a great challenge, which calls for efficient heterogeneous catalysts with a sophisticated structure. Herein, we developed "MOF-on-MXene" heterostructures. By constructing S-scheme heterostructures MXene/Z67450, the internal electric field is generated via the Ti-O-Co bonds at the interface, favoring the excitation of the photogenerated electrons, providing a driving force for accelerating the charge transfer, and enhancing redox performances. Further contributed by the synergy of Ti-O-Co and Co-N4 bonds, the MXene/Z67450 composites exhibit enhanced ability for activating the periodate system to degrade organic pollutants via building a donor-catalyst-acceptor system. In the presence of periodate and light, MXene/Z67450 degraded ∼100% of tetracycline hydrochloride (TCH) in only 10 min. The active sites of the heterostructures can react with the periodate and give the intermediate MXene/Z67450-PI (*PI). As a result, it efficiently reduced the PI adsorption energy and promoted the decomposition of PI and the formation of holes/electrons, singlet oxygen (1O2) as well as hydroxyl radical (•OH). In addition, the MXene/Z67450 composites exhibit high stability, reusability, selectivity, and environmental robustness. Our study provides a research direction for rationally designing MXene-based heterojunctions and applying them in the periodate activation system.

Non-metallic iodine single-atom catalysts with optimized electronic structures for efficient Fenton-like reactions

In this study, we introduce a highly effective non-metallic iodine single-atom catalyst (SAC), referred to as I-NC, which is strategically confined within a nitrogen-doped carbon (NC) scaffold. This configuration features a distinctive C-I coordination that optimizes the electronic structure of the nitrogen-adjacent carbon sites. As a result, this arrangement enhances electron transfer from peroxymonosulfate (PMS) to the active sites, particularly the electron-deficient carbon. This electron transfer is followed by a deprotonation process that generates the peroxymonosulfate radical (SO5•-). Subsequently, the SO5•- radical undergoes a disproportionation reaction, leading to the production of singlet oxygen (1O2). Furthermore, the energy barrier for the rate-limiting step of SO5•- generation in I-NC is significantly lower at 1.45 eV, compared to 1.65 eV in the NC scaffold. This reduction in energy barrier effectively overcomes kinetic obstacles, thereby facilitating an enhanced generation of 1O2. Consequently, the I-NC catalyst exhibits remarkable catalytic efficiency and unmatched reactivity for PMS activation. This leads to a significantly accelerated degradation of pollutants, evidenced by a relatively high observed kinetic rate constant (kobs ~ 0.436 min-1) compared to other metallic SACs. This study offers valuable insights into the rational design of effective non-metallic SACs, showcasing their promising potential for Fenton-like reactions in water treatment applications.

Low-peroxide-consumption fenton-like systems: The future of advanced oxidation processes

Conventional heterogeneous Fenton-like systems employing different peroxides have been developed for water/wastewater remediation. However, a large population of peroxides consumed during various Fenton-like systems with low utilization efficiency and associated secondary contamination have become the bottlenecks for their actual applications. Recent strategies for lowering the peroxide consumptions to develop economic Fenton-like systems are primarily devoted to the effective radical generation and subsequent high-efficiency radical utilization through catalysts/systems engineering, leveraging emerging nonradical oxidation pathways with higher selectivity and longer life of the reactive intermediate, as well as reactor designs for promoting the mass transfer and peroxides decomposition to improve the yield of radicals/nonradicals. However, a comparative review summarizing the mechanisms and pathways of these strategies has not yet been published. In this review, we endeavor to showcase the designated systems achieving the reduction of peroxides while ensuring high catalytic activity from the perspective of the above strategic mechanisms. An in-depth understanding of these aspects will help elucidate the key mechanisms for achieving economic peroxide consumption. Finally, the existing problems of these strategies are put forward, and new ideas and research directions for lowering peroxide consumption are proposed to promote the application of various Fenton-like systems in actual wastewater purification.

Intrinsic structure-function connections of carbon-encapsulated nanoscale zero-valent-iron using various pyrolysis atmospheres

Carbon-encapsulated nanoscale zero-valent-iron (C@Fe0) derived from plant-based extracts has been the subject of growing interest due to its environmental friendliness. However, the effects of various pyrolysis atmospheres on the structure-function connections of C@Fe0 are still unclear. In this study, three pyrolytic atmospheres, namely Air, N2, and 5% H2/Ar were selected to fabricate X-C@Fe0 (X represented as A, N, H) for removing 2,4,6-Trichlorophenol (TCP), and the relationships between their structures and functions were demonstrated. The N-C@Fe0 with improved hydrophobicity exhibited superior TCP adsorptive performance compared to H-C@Fe0 and A-C@Fe0. Apart from this, N-C@Fe0 effectively reduced TCP through dechlorination, this process achieved 25.9% dichlorination efficiency, and in turn alleviated products toxicity. Electrochemical tests and density functional theory calculations showed that the substitution of nitrogen with carbon in N-C@Fe0 elevated the Fe-d band center and enhanced the hybridization between Fe-3d and C-2p orbital, which collectively promoted the dichlorination of TCP. This study will provide practical guideline for improving the intrinsic activity of iron-carbon materials using pyrolytic atmosphere engineering.

Revealing the Overlooked Catalytic Ability of γ-Al2O3: Efficient Activation of Peroxymonosulfate for Enhanced Water Treatment

Activated alumina (γ-Al2O3) is one of the few nanomaterials manufactured at a ton-scale and successfully implemented in large-scale water treatment. Yet its role in advanced oxidation processes (AOPs) has primarily been limited to functioning as an inert carrier due to its inherently nonredox nature. This study, for the first time, presents the highly efficient capability of γ-Al2O3 to activate peroxymonosulfate (PMS) for selectively eliminating electron-rich organic pollutants in the presence of Cl-. Through experimental and theoretical analysis, we revealed that γ-Al2O3, characterized by uniquely strong Lewis acid sites, enabled robust inner-sphere complexation between PMS and Al(III) sites, triggering the oxidation of Cl- to free chlorine through a distinctive, low-energy-barrier Eley-Rideal pathway. Such a unique pathway resulted in a 42.7-fold increase in free chlorine generation, culminating in a remarkable 145.9-fold enhancement in the degradation of carbamazepine (CBZ) compared with the case without γ-Al2O3. Furthermore, this catalyst exhibited high oxidant utilization efficiency, stable performance in real-world environmental matrices, and sustained long-term activation for over 1206 bed volumes (BV) with a CBZ removal rate exceeding 90% in fixed-bed experiments. These favorable features render γ-Al2O3 an extremely promising nanomaterial for sustainable water treatment initiatives.

Fundamental Insights into the Direct Electron Transfer Mechanism on Ag Atomic Cluster

The nonradical oxidation pathway for pollutant degradation in Fenton-like catalysis is favorable for water treatment due to the high reaction rate and superior environmental robustness. However, precise regulation of such reactions is still restricted by our poor knowledge of underlying mechanisms, especially the correlation between metal site conformation of metal atom clusters and pollutant degradation behaviors. Herein, we investigated the electron transfer and pollutant oxidation mechanisms of atomic-level exposed Ag atom clusters (AgAC) loaded on specifically crafted nitrogen-doped porous carbon (NPC). The AgAC triggered a direct electron transfer (DET) between the terminal oxygen (Oα) of surface-activated peroxodisulfate and the electron-donating substituents-containing contaminants (EDTO-DET), rendering it 11-38 times higher degradation rate than the reported carbon-supported metal catalysts system with various single-atom active centers. Heterocyclic substituents and electron-donating groups were more conducive to degradation via the EDTO-DET system, while contaminants with high electron-absorbing capacity preferred the radical pathway. Notably, the system achieved 79.5% chemical oxygen demand (COD) removal for the treatment of actual pharmaceutical wastewater containing 1053 mg/L COD within 30 min. Our study provides valuable new insights into the Fenton-like reactions of metal atom cluster catalysts and lays an important basis for revolutionizing advanced oxidation water purification technologies.

Pilot-scale and large-scale Fenton-like applications with nano-metal catalysts: From catalytic modules to scale-up applications

Recently, great efforts have been made to advance the pilot-scale and engineering-scale applications of Fenton-like processes using various nano-metal catalysts (including nanosized metal-based catalysts, smaller nanocluster catalysts, and single-atom catalysts, etc.). This step is essential to facilitate the practical applications of advanced oxidation processes (AOPs) for these highly active nano-metal catalysts. Before large-scale implementation, these nano-metal catalysts must be converted into the effective catalyst modules (such as catalytic membranes, fluidized beds, or polypropylene sphere suspension systems), as it is not feasible to use suspended powder catalysts for large-scale treatment. Therefore, the pilot-scale and engineering applications of nano-metal catalysts in Fenton-like systems in recent years is exciting. In addition, the combination of life cycle assessment (LCA) and techno-economic analysis (TEA) can provide a useful support tool for engineering scale Fenton-like applications. This paper summarizes the designs and fabrications of various advanced modules based on nano-metal catalysts, analyzes the advantages and disadvantages of these catalytic modules, and further discusses their Fenton-like pilot scale or engineering applications. Concepts of future Fenton-like engineering applications of nano-metal catalysts were also discussed. In addition, current challenges and future expectations in pilot-scale or engineering applications are assessed in conjunction with LCA and TEA. These challenges require further technological advances to enable larger scale engineering applications in the future. The aim of these efforts is to increase the potential of nanoscale AOPs for practical wastewater treatment.

Microenvironment Engineering of Heterogeneous Catalysts for Liquid-Phase Environmental Catalysis

Environmental catalysis has emerged as a scientific frontier in mitigating water pollution and advancing circular chemistry and reaction microenvironment significantly influences the catalytic performance and efficiency. This review delves into microenvironment engineering within liquid-phase environmental catalysis, categorizing microenvironments into four scales: atom/molecule-level modulation, nano/microscale-confined structures, interface and surface regulation, and external field effects. Each category is analyzed for its unique characteristics and merits, emphasizing its potential to significantly enhance catalytic efficiency and selectivity. Following this overview, we introduced recent advancements in advanced material and system design to promote liquid-phase environmental catalysis (e.g., water purification, transformation to value-added products, and green synthesis), leveraging state-of-the-art microenvironment engineering technologies. These discussions showcase microenvironment engineering was applied in different reactions to fine-tune catalytic regimes and improve the efficiency from both thermodynamics and kinetics perspectives. Lastly, we discussed the challenges and future directions in microenvironment engineering. This review underscores the potential of microenvironment engineering in intelligent materials and system design to drive the development of more effective and sustainable catalytic solutions to environmental decontamination.

Reconstructing the electron and spin structures of nanoscale iron sulfide through a biosurfactant layer towards radical-nonradical co-dominant regime

Radical-nonradical co-dominant pathways have become a hot topic in advanced oxidation, but achieving this on transition metal sulfides (TMS) remains challenging because their inherently higher electron and spin densities always induce radicals rather than nonradicals. Herein, a biosurfactant layer (BLR) was introduced to redistribute the electron and spin structure of nanoscale iron sulfide (FeS), which allowed both radical and nonradical to co-dominate the catalytic reaction. The resulting BLR-encased FeS hybrid (BLR@FeS) exhibited satisfactory removal efficiency (98.5 %) for hydrogen peroxide (H2O2) activation, outperforming both the constituent components [FeS (70.9 %) and BLR (86.2 %)]. Advanced characterizations showed that C, O, N-related sites (-CO and -NC) in BLR attracted electrons in FeS due to their strong electronegativity and electron-withdrawing capacity, which not only decreased electron density in FeS, but also resulted in a shift of the Fe/S sites from the high-spin to the medium-spin state. The reaction routes established by the BLR@FeS/H2O2 system maintained desirable stability against environmental interferences such as common inorganic anions, humic acid and changes in pH. Our study provides a state-of-the-art, molecule-level understanding of tunable co-dominant pathways and expands the targeted applications in the field of advanced oxidation.

Revealing the Synergistic Effect of Cation and Anion Vacancies on Enhanced Fenton-Like Reaction: The Electron Density Modulation of O 2p-Co 3d Bands

Defect engineering is considered as a flexible and effective mean to improve the performance of Fenton-like reactions. Herein, a simple method is employed to synthesize Co3O4 catalysts with Co-O vacancy pairs (VP) for peroxymonosulfate (PMS) activation. Multi-scaled characterization, experimental, and simulation results jointly revealed that the cation vacancies-VCo contributed to enhanced conductivity and anion vacancies-VO provided a new active center for the 1O2 generation. Co3O4-VP can optimize the O 2p and Co 3d bands with the strong assistance of synergistic double vacancies to reduce the reaction energy barrier of the "PMS → Co(IV) = O → 1O2" pathway, ultimately triggering the stable transition of mechanism. Co3O4-VP catalysts with radical-nonradical collaborative mechanism achieve the synchronous improvement of activity and stability, and have good environmental robustness to favor water decontamination applications. This result highlights the possibility of utilizing anion and cation vacancy engineering strategies to rational design Co3O4-based materials widely used in catalytic reactions.

Autocatalytic degradation of Cu-EDTA in the Calcite/PMS system: Singlet oxygen and Cu(III)

The simultaneous removal of heavy metal complexes (HMCs) and heavy metal ions presents a significant challenge in treating wastewater. To address this, we propose a Calcite/Peroxymonosulfate (Calcite/PMS) system aimed at simultaneously decomplexing Cu-EDTA and removing Cu ions. Calcite/PMS system could achieve 99.5 % Cu-EDTA decomplexation and 61.9 % Cu ions removal within 60 min under initial conditions of Cu-EDTA (10 mg/L), Calcite (3 g/L), and PMS (2 mM). Singlet oxygen (1O2) emerged as the predominant reactive species responsible for Cu-EDTA decomplexation, which selectively targeted the N-C bonds in the Cu-EDTA structure to produce intermediates with lower biotoxicity than EDTA. Interestingly, solid phase Cu(III) (≡Cu(III)) promoted the generation of superoxide radicals (O2•-) with a contribution of up to 72.8 %. Subsequently, nascent ≡Cu(III) and O2•- accelerated the degradation of intermediates. Besides, coexisting organic substances inhibited Cu-EDTA decomplexation, whereas inorganic ions had a weak impact. After five cycles of use, the Calcite/PMS system retained 99.3 % efficiency in decomplexing Cu-EDTA. This investigation provides valuable insights into using calcite to remove HMCs and enhances our comprehension of the decomplexation intermediates accelerating HMCs degradation.

Strong and Fatigue-Resistant Carbon Nanotube Composites Enabled by Amorphous/Crystalline Heterophase Shell

Lightweight materials with high strength and long cyclic lifespan are greatly demanded in practical applications, yet these properties are usually mutually exclusive. Here, we present a strong, lightweight, highly deformation-tolerant, and fatigue-resistant carbon nanotube (CNT) composite enabled by an amorphous/crystalline heterophase carbon shell. In particular, we obtain nanocrystallites with CNT-induced crystalline orientation uniformly embedded within an amorphous matrix by controlled thermal annealing. The heterophase carbon shell effectively alleviates the stress concentration and inhibits crack propagation, which renders our composite superior mechanical properties and high fatigue resistance (106 compression cycles at 20% strain with high stress of 144 kPa, or 5 × 105 cycles at 50% strain with stress up to 260 kPa). This study provides a deep understanding of amorphous-crystalline phase transition and insight into utilizing phase engineering to design and develop other high-performance functional materials such as structural materials and catalysis.

Overcoming metals redox rate limitations in spinel oxide-driven Fenton-like reactions via synergistic heteroatom doping and carbon anchoring for efficient micropollutant removal

The transition metals redox rate limitations of spinel oxides during Fenton-like reactions hinder its efficient and sustainable treatment of actual wastewater. Herein, we propose to optimize the electronic structure of Co-Mn spinel oxide (CM) via sulfur doping and carbon matrix anchoring synergistically, enhancing the radicals-nonradicals Fenton-like processes for efficient water decontamination. Activating peroxymonosulfate (PMS) with optimised spinel oxide (CMSAC) achieved near-complete removal of ofloxacin (10 mg/L) within 6 min, showing 8.4 times higher efficiency than CM group. Significantly higher yields of SO4·- and high-valent metal species in CMSAC/PMS system provided exceptional resistance to co-existing anions, enabling efficient removal of various emerging contaminants in high salinity leachate. Specifically, sulfur coordination and carbon anchoring-induced oxygen vacancy synergistically improved the electronic structure and electron transfer efficiency of CMSAC, thus forming highly reactive Co sites and significantly reducing the energy barrier for Co(IV)=O generation. The reductive sulfur species facilitated the conversion of Co(III) to Co(II), thereby maintaining the stability of the catalytic activity of CMSAC. This work developed a synergistic optimization strategy to overcome the metals redox rate limitations of spinel oxides in Fenton-like reactions, providing deep mechanistic insights for designing Fenton-like catalysts suitable for practical applications.

Key role of Phyllanthus emblica L. fruit extract promotes ZVI/H2O2 process: rich titratable acid, suitable chelating ability, and antioxidant capacity

Phyllanthus emblica L. fruit extract (PFE) was introduced to improve ZVI/H2O2 technology, and the efficiency and mechanism of PFE promoting ZVI/H2O2 technology were explored. With the introduction of PFE, the Norfloxacin (NOR) removal rate and kobs of the process were improved by 41.17% and 5.08 times, respectively. In the ZVI/H2O2/PFE process, the degradation of NOR by the attack of ROS is the main pathway for decontamination and is dominated by the heterogeneous reaction on the catalyst surface. PFE contains 13.92 g/L titratable acid and has good complexing ability and antioxidant ability. The mechanism of PFE promoting ZVI/H2O2 technology was based on lowering the pH, complemented by chelation and antioxidant capacity. With the introduction of PFE, the utilization rate of the reagent was significantly increased (7.56 times for ZVI and 3.21 times for H2O2), the applicable pH range was widened (6-9) and the iron sludge was reduced (32.80%). Meanwhile, the concept of UPR is proposed for the first time. The result is the key role to the selection of green promoters in the ZVI/H2O2 process depends on the abundance of titratable acid, followed by a certain chelating ability and antioxidant capacity.

Cu-optimized long-range interaction between Co nanoparticles and Co single atoms: Improved Fenton-like reaction activity

The interplay between multi-atom assembly configurations and single atoms (SAs) has been gaining attention in research. However, the effect of long-term range interactions between SAs and multi-atom assemblies on the orbital filling characteristics has yet to be investigated. In this context, we introduced copper (Cu) doping to strengthen the interaction between cobalt (Co) nanoparticles (NPs) and Co SAs by promoting the spontaneous formation of Co-Cu alloy NPs that tends toward aggregation owing to its negative cohesive energy (-0.06454), instead of forming Cu SAs. The incorporation of Cu within the Co-Cu alloy NPs, compared to the pure Co NPs, significantly expedites the kinetics of peroxymonosulfate (PMS) oxidation processes on Co SAs. Unlike Co NPs, Co-Cu NPs facilitate electron rearrangement in the d orbitals (especially dz2 and dxz) near the Fermi level in Co SAs, thereby optimizing the dz2-O (PMS) and dxz-O (SO5-) orbital interaction. Eventually, the Co-Cu alloy NPs embedded in nitrogen-doped carbon (CC@CNC) catalysts rapidly eliminated 80.67% of 20 mg L-1 carbamazepine (CBZ) within 5 min. This performance significantly surpasses that of catalysts consisting solely of Co NPs in a similar matrix (C@CNC), which achieved a 58.99% reduction in 5 min. The quasi in situ characterization suggested that PMS acts as an electron donor and will transfer electrons to Co SAs, generating 1O2 for contaminant abatement. This study offers valuable insights into the mechanisms by which composite active sites formed through multi-atom assembly interact at the atomic orbital level to achieve high-efficiency PMS-based advanced oxidation processes at the atomic orbital level.

Electron Delocalization Disentangles Activity-Selectivity Trade-Off of Transition Metal Phosphide Catalysts in Oxidative Desulfurization

Breaking the activity-selectivity trade-off has been a long-standing challenge in catalysis. Here, we proposed a nanoheterostructure engineering strategy to overcome the trade-off in metal phosphide catalysts for the oxidative desulfurization (ODS) of fuels. Experimental and theoretical results demonstrated that electron delocalization was the key driver to simultaneously achieve high activity and high selectivity for the molybdenum phosphide (MoP)/tungsten phosphide (WP) nanoheterostructure catalyst. The electron delocalization not only promoted the catalytic pathway transition from predominant radicals to singlet oxygens in H2O2 activation but also simultaneously optimized the adsorption of reactants and intermediates on Mo and W sites. The presence of such dual-enhanced active sites ideally compensated for the loss of activity due to the nonradical catalytic pathway, consequently disentangling the activity-selectivity trade-off. The resulting catalyst (MoWP2/C) unprecedentedly achieved 100% removal of thiophenic compounds from real diesel at an initial concentration of 2676 ppm of sulfur with a high turnover frequency (TOF) of 105.4 h-1 and a minimal O/S ratio of 4. This work provides fundamental insight into the structure-activity-selectivity relationships of heterogeneous catalysts and may inspire the development of high-performance catalysts for ODS and other catalytic fields.

Structurally disordered MoSe2 with rich 1T phase as a universal platform for enhanced photocatalytic hydrogen production

The improvement of surface reactivity in noble-metal-free cocatalysts is crucial for the development of efficient and cost-effective photocatalytic systems. However, the influence of crystallinity on catalytic efficacy has received limited attention. Herein, we report the utilization of structurally disordered MoSe2 with abundant 1T phase as a versatile cocatalyst for photocatalytic hydrogen evolution. Using MoSe2/carbon nitride (CN) hybrids as a case study, it is demonstrated that amorphous MoSe2 significantly enhances the hydrogen evolution rate of CN, achieving up to 11.37 μmol h-1, surpassing both low crystallinity (8.24 μmol h-1) and high crystallinity MoSe2 (3.86 μmol h-1). Experimental analysis indicates that the disordered structure of amorphous MoSe2, characterized by coordination-unsaturated surface sites and a rich 1T phase with abundant active sites at the basal plane, predominantly facilitates the conversion of surface-bound protons to hydrogen. Conversely, the heightened charge transfer capacity of the highly crystalline counterpart plays a minor role in enhancing practical catalytic performance. This approach is applicable for enhancing the photocatalytic hydrogen evolution performance of various semiconducting photocatalysts, including CdS, TiO2, and ZnIn2S4, thereby offering novel insights into the advancement of high-performance non-precious catalysts through phase engineering.

Inverted loading strategy regulates the Mn-OV-Ce sites for efficient fenton-like catalysis

Regulating interfacial active sites to improve peroxymonosulfate (PMS) activation efficiency is a hot topic in the heterogeneous catalysis field. In this study, we develop an inverted loading strategy to engineer asymmetric Mn-OV-Ce sites for PMS activation. Mn3O4@CeO2 prepared by loading CeO2 nanoparticles onto Mn3O4 nanorods exhibits the highest catalytic activity and stability, which is due to the formation of more oxygen vacancies (OV) at the Mn-OV-Ce sites, and the surface CeO2 layer effectively inhibits corrosion by preventing the loss of manganese ion active species into the solution. In situ characterizations and density functional theory (DFT) studies have revealed effective bimetallic redox cycles at asymmetric Mn-OV-Ce active sites, which promote surface charge transfer, enhance the adsorption reaction activity of active species toward pollutants, and favor PMS activation to generate (•OH, SO4•-, O2•- and 1O2) active species. This study provides a brand-new perspective for engineering the interfacial behavior of PMS activation.

Atomic-Level Engineered Cobalt Catalysts for Fenton-Like Reactions: Synergy of Single Atom Metal Sites and Nonmetal-Bonded Functionalities

Single atom catalysts (SACs) are atomic-level-engineered materials with high intrinsic activity. Catalytic centers of SACs are typically the transition metal (TM)-nonmetal coordination sites, while the functions of coexisting non-TM-bonded functionalities are usually overlooked in catalysis. Herein, the scalable preparation of carbon-supported cobalt-anchored SACs (CoCN) with controlled Co─N sites and free functional N species is reported. The role of metal- and nonmetal-bonded functionalities in the SACs for peroxymonosulfate (PMS)-driven Fenton-like reactions is first systematically studied, revealing their contribution to performance improvement and pathway steering. Experiments and computations demonstrate that the Co─N3C coordination plays a vital role in the formation of a surface-confined PMS* complex to trigger the electron transfer pathway and promote kinetics because of the optimized electronic state of Co centers, while the nonmetal-coordinated graphitic N sites act as preferable pollutant adsorption sites and additional PMS activation sites to accelerate electron transfer. Synergistically, CoCN exhibits ultrahigh activity in PMS activation for p-hydroxybenzoic acid oxidation, achieving complete degradation within 10 min with an ultrahigh turnover frequency of 0.38 min-1, surpassing most reported materials. These findings offer new insights into the versatile functions of N species in SACs and inspire rational design of high-performance catalysts in complicated heterogeneous systems.

Constructing Nano-Heterostructure with Dual-Site to Boost H2O2 Activation and Regulate the Transformation of Free Radicals

A major issue with Fenton-like reaction is the excessive consumption of H2O2 caused by the sluggish regeneration rate of low-valent metal, and how to improve the activation efficiency of H2O2 has become a key in current research. Herein, a nano-heterostructure catalyst (1.0-MnCu/C) based on nano-interface engineering is constructed by supporting Cu and MnO on carbon skeleton, and its kinetic rate for the degradation of tetracycline hydrochloride is 0.0436 min-1, which is 2.9 times higher than that of Cu/C system (0.0151 min-1). The enhancement of removal rate results from the introduced Mn species can aggregate and transfer electrons to Cu sites through the electron bridge Mn-N/O-Cu, thus preventing Cu2+ from oxidizing H2O2 to form O2 •-, and facilitating the reduction of Cu2+ and generating more reactive oxygen species (1O2 and ·OH) with stronger oxidation ability, resulting in H2O2 utilization efficiency is 1.9 times as much as that of Cu/C. Additionally, the good and stable practical application capacity in different bodies demonstrates that it has great potential for practical environmental remediation.

Oxygen Doping Cooperated with Co-N-Fe Dual-Catalytic Sites: Synergistic Mechanism for Catalytic Water Purification within Nanoconfined Membrane

Atom-site catalysts, especially for graphitic carbon nitride-based catalysts, represents one of the most promising candidates in catalysis membrane for water decontamination. However, unravelling the intricate relationships between synthesis-structure-properties remains a great challenge. This study addresses the impacts of coordination environment and structure units of metal central sites based on Mantel test, correlation analysis, and evolution of metal central sites. An optimized unconventional oxygen doping cooperated with Co-N-Fe dual-sites (OCN Co/Fe) exhibits synergistic mechanism for efficient peroxymonosulfate activation, which benefits from a significant increase in charge density at the active sites and the regulation in the natural population of orbitals, leading to selective generation of SO4 •-. Building upon these findings, the OCN-Co/Fe/PVDF composite membrane demonstrates a 33 min-1 ciprofloxacin (CIP) rejection efficiency and maintains over 96% CIP removal efficiency (over 24 h) with an average permeance of 130.95 L m-2 h-1. This work offers a fundamental guide for elucidating the definitive origin of catalytic performance in advance oxidation process to facilitate the rational design of separation catalysis membrane with improved performance and enhanced stability.

Nanoconfinement steers nonradical pathway transition in single atom fenton-like catalysis for improving oxidant utilization

The introduction of single-atom catalysts (SACs) into Fenton-like oxidation promises ultrafast water pollutant elimination, but the limited access to pollutants and oxidant by surface catalytic sites and the intensive oxidant consumption still severely restrict the decontamination performance. While nanoconfinement of SACs allows drastically enhanced decontamination reaction kinetics, the detailed regulatory mechanisms remain elusive. Here, we unveil that, apart from local enrichment of reactants, the catalytic pathway shift is also an important cause for the reactivity enhancement of nanoconfined SACs. The surface electronic structure of cobalt site is altered by confining it within the nanopores of mesostructured silica particles, which triggers a fundamental transition from singlet oxygen to electron transfer pathway for 4-chlorophenol oxidation. The changed pathway and accelerated interfacial mass transfer render the nanoconfined system up to 34.7-fold higher pollutant degradation rate and drastically raised peroxymonosulfate utilization efficiency (from 61.8% to 96.6%) relative to the unconfined control. It also demonstrates superior reactivity for the degradation of other electron-rich phenolic compounds, good environment robustness, and high stability for treating real lake water. Our findings deepen the knowledge of nanoconfined catalysis and may inspire innovations in low-carbon water purification technologies and other heterogeneous catalytic applications.

Precise Modulation of the Coordination Environment of Single Cu Site Catalysts to Regulate the Peroxymonosulfate Activation Pathway for Water Remediation

Single atom site catalysts (SACs) with atomically dispersed active sites can be expected to be potential ideal catalysts for accurately modulating the persulfate activation pathway during the water remediation process because of their well-defined structure and the maximum metallic atom utilization. In this paper, a series of Cu SACs with different coordination environments were synthesized to elaborately regulate the peroxymonosulfate activation pathway in AOPs to clarify active species generation and transformation in water remediation. The degradation rate constants (kobs) of Cu-N2, Cu-N3, and Cu-N4 were 0.028, 0.021, and 0.015 min-1, respectively. Cu-N2 SACs exhibited a noticeable enhanced performance for bisphenol A (BPA) removal from water compared to that of the Cu-Nx SACs (x = 3, 4), accompanied by peroxymonosulfate (PMS) activation pathway variation. As shown by experimental and theoretical results, the PMS activation pathway was transformed from ROS to electron transfer with nitrogen coordination numbers decreasing from 4 to 2, which can be ascribed to the uneven charge distribution of Cu sites as well as upshifts in the d-band center, and thereby optimized electron transfer for PMS activation. Furthermore, the increasing nitrogen vacancies of single Cu site catalysts can also result in more unoccupied 3d orbitals of Cu atoms in SACs, thereby improving the intermediates' (PMS and BPA) adsorption-desorption process and BPA removal performance. These findings provided a beneficial approach for the coordination number regulation of SACs in water remediation.

Colloid-bound radicals formed in NOM-enhanced Fe(III)/peroxymonosulfate process accelerate the degradation of trace organic contaminants in water

The omnipresence of natural organic matter (NOM) in water bodies traditionally hinders the degradation of trace organic contaminants (TrOCs) in peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs). This study elucidates the positive role of NOM in enhancing the degradation of TrOCs through the Fe(III)/PMS process. During this process, NOM reduces Fe(III), yielding semiquinone-like radical (NOM•) and concurrently forming NOM-Fe(III) colloids. In addition to the Fe(II)-mediated activation pathway, Fe(III) sites on NOM-Fe(III) colloids effectively transfer electrons from NOM• or some redox-active moieties to PMS, resulting in the generation of long-lived colloid-bound SO4•-, which can readily undergo hydrolysis to produce HO•. The stabilization of SO4•- and HO• by NOM-Fe(III) colloids, combined with their moderate adsorption of TrOCs, results in surface-confined reactions that significantly enhance TrOC removal, despite the presence of concurrent quenching reactions between radicals and NOM. Further, the significant positive correlation between the phenolic contents of eight NOM types and TrOC degradation kinetics suggests phenolic moieties as the primary electron source for PMS activation. By in-situ utilizing NOM in raw water, a PMS-amended iron coagulation process with 0.2 mM Fe(III) and PMS effectively removes 90-100 % of six coexisting TrOCs. This study unveils the previously unrecognized role of colloid-bound radicals in decontamination processes, offering valuable insights into harnessing NOM's influence in advanced oxidation water treatment processes.

Atomically Dispersed Fe-N4 Site as a Conductive Bridge Enables Efficient and Stable Activation of Peroxymonosulfate: Active Site Renewal, Anti-Oxidative Capacity, and Pathway Alternation Mechanism

Atomically dispersed metal sites anchored on nitrogen-doped carbonaceous substrates (M-NCs) have emerged as promising alternatives to conventional peroxymonosulfate (PMS) activators; however, the exact contribution of each site still remains elusive. Herein, isolated Fe-N4 active site-decorated three-dimensional NC substrates (FeSA-NC) via a micropore confinement strategy are fabricated to initiate PMS oxidation reaction, achieving a specific activity of 5.16 × 103 L·min-1·g-1 for the degradation of bisphenol A (BPA), which outperforms most of the state-of-the-art single-atom (SA) catalysts. Mechanism inquiry reveals enhanced chemisorption and electron transfer between PMS and FeSA-NC, enabling an inner electron shuttle mechanism in which Fe-N4 serves as a conductive bridge. The Fe-N4 sites reduce the energy barrier for the formation of SO5* and H*, thereby transforming the reaction pathway from directly adjacent electron transfer into reactive oxygen species (ROS)-dominated oxidation. Theoretical calculations and dynamic simulations reveal that the Fe-N4 sites induce facilitated desorption of reaction intermediates (PMS*/BPA*), which collectively contribute to the renewal of active sites and eventually enhance the catalytic durability. This work offers a reasonable interpretation for the important role of the Fe-N4 moiety in altering the activation mechanism and enhancing the antioxidative capacity of NC materials, which fundamentally furnishes theoretical support for SA material design.

The origins of potentially superior properties and multifunctionalities of carbon-nano zero-valent iron in the carbonization pyrolysis process

Although carbon-nano zero-valent iron (C@nZVI) composites with unique properties have been used for environmental remediation, the origins of their superior properties and multifunctionalities of C@nZVI still need to be verified. Here, iron precursor nanoparticles (PML-Fe NPs) synthesized by Pinus massoniana Lamb and carbonized C@nZVI were systemically compared to reveal the origins of the structure and performance of C@nZVI composites. Characterizations showed that structure-modulated C@nZVI has favorable properties of good crystallinity, graphite carbon-rich structure but also defects when compared to PML-Fe NPs. The resultant carbon layer fundamentally improved its dispersion and anti-oxidation properties. Further experiments demonstrated that the evolution of material crystallinity, graphitization and defects affected the reaction pathway of hexavalent chromium (Cr(VI)), oxytetracycline hydrochloride (OTC), and 17β-estradiol (βE2). The multifunctionalities covered adsorption, reduction and catalytic oxidation. This study explains the origins of multifunctional C@nZVI by understanding the structure-property correlation in the carbonization process.

Order-disorder engineering of RuO2 nanosheets towards pH-universal oxygen evolution

Ru-based electrocatalysts are considered promising anode catalysts towards water electrolysis due to their impressive activity under acidic conditions. Yet, caused by the collapse of the local crystalline domains and concurrent leaching of Ru species during the OER process, durability against structural degradation remains poor. Herein, we present an order-disorder structure optimization strategy, based on RuO2 nanosheets with well-defined amorphous-crystalline boundaries supported on carbon cloth (a/c-RuO2/CC), to effectively catalyze water oxidation, especially in the case of an acidic medium. Specifically, the as-prepared a/c-RuO2/CC sample has achieved a lower overpotential of 150 mV at 10 mA cm-2, a smaller Tafel slope of 47 mV dec-1, and a significantly higher durability with suppressed dissolution of Ru, with regard to its crystalline (c-RuO2/CC) and amorphous (a-RuO2/CC) counterparts. Computational simulations combined with experimental characterizations uncover that the construction of the structurally ordered-disordered boundary enables a weakened Ru-O covalency with regard to the ordered counterpart, which suppresses the leaching of active Ru species from the crystalline phase, thus enhances stability. An upshift of the d-band center in a/c-RuO2/CC relative to a-RuO2/CC reduces the energy barrier of the potential-determining step (*O → *OOH), thereby dramatically boosting activity.

A novel design of Cu(I) active site on the metal-organic framework for exploring the structural transformation of Fenton-like catalysts through in situ "capturing" OH. J Colloid Interface Sci 2023;648:778-786. [PMID: 37321097 DOI: 10.1016/j.jcis.2023.05.189] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

The mutual transformation of reactive oxygen species may affect the structural transformation of catalysts during the Fenton-like processes. Its in-depth understanding is essential to achieve high catalytic activity and stability. In this study, a novel design of Cu(I) active sites based on the metal-organic framework (MOF) is proposed to "capture" OH^- produced via Fenton-like processes and re-coordinate the oxidized Cu sites. The Cu(I)-MOF presents an excellent removal efficiency for sulfamethoxazole (SMX), with a high removal kinetic constant of 7.146 min^-1. Combing DFT calculations with experimental observations, we have revealed that the Cu of Cu(I)-MOF exhibits a lower d-band center, enabling efficient activation of H₂O₂ and spontaneous "capturing" of OH^- to form Cu-MOF, which can be reorganized into the Cu(I)-MOF through molecular regulation for recycle. This research demonstrates a promising Fenton-like approach for solving the trade-off between catalytic activity and stability and provides new insights into the design and synthesis of efficient MOF-based catalysts for water treatment.

Recent Advances in Phase-Engineered Photocatalysts: Classification and Diversified Applications

Phase engineering is an emerging strategy for tuning the electronic states and catalytic functions of nanomaterials. Great interest has recently been captured by phase-engineered photocatalysts, including the unconventional phase, amorphous phase, and heterophase. Phase engineering of photocatalytic materials (including semiconductors and cocatalysts) can effectively affect the light absorption range, charge separation efficiency, or surface redox reactivity, resulting in different catalytic behavior. The applications for phase-engineered photocatalysts are widely reported, for example, hydrogen evolution, oxygen evolution, CO₂ reduction, and organic pollutant removal. This review will firstly provide a critical insight into the classification of phase engineering for photocatalysis. Then, the state-of-the-art development of phase engineering toward photocatalytic reactions will be presented, focusing on the synthesis and characterization methodologies for unique phase structure and the correlation between phase structure and photocatalytic performance. Finally, personal understanding of the current opportunities and challenges of phase engineering for photocatalysis will also be provided.