Bacteriorhodopsin is an inside-out protein

Scaling up Functional Analyses of the G Protein-Coupled Receptor Rhodopsin

Eukaryotic cells use G protein-coupled receptors (GPCRs) to convert external stimuli into internal signals to elicit cellular responses. However, how mutations in GPCR-coding genes affect GPCR activation and downstream signaling pathways remain poorly understood. Approaches such as deep mutational scanning show promise in investigations of GPCRs, but a high-throughput method to measure rhodopsin activation has yet to be achieved. Here, we scale up a fluorescent reporter assay in budding yeast that we engineered to study rhodopsin's light-activated signal transduction. Using this approach, we measured the mutational effects of over 1200 individual human rhodopsin mutants, generated by low-frequency random mutagenesis of the GPCR rhodopsin (RHO) gene. Analysis of the data in the context of rhodopsin's three-dimensional structure reveals that transmembrane helices are generally less tolerant to mutations compared to flanking helices that face the lipid bilayer, which suggest that mutational tolerance is contingent on both the local environment surrounding specific residues and the specific position of these residues in the protein structure. Comparison of functional scores from our screen to clinically identified rhodopsin disease variants found many pathogenic mutants to be loss of function. Lastly, functional scores from our assay were consistent with a complex counterion mechanism involved in ligand-binding and rhodopsin activation. Our results demonstrate that deep mutational scanning is possible for rhodopsin activation and can be an effective method for revealing properties of mutational tolerance that may be generalizable to other transmembrane proteins.

Structural studies of bacteriorhodopsin in BC era

It marked half a century since the discovery of bacteriorhodopsin two years ago. On this occasion, I have revisited historically important diffraction studies of this membrane protein, based on my recollections. X-ray diffraction and electron diffraction, and electron microscopy, described the low-resolution structure of bacteriorhodopsin within the purple membrane. Neutron diffraction was effective to assign the helical regions in the primary structure with 7 rods revealed by low-resolution structure as well as to describe the retinal position. Substantial conformational changes upon light illumination were clarified by the structures of various photointermediates. Early trials of time-resolved studies were also introduced. Models for the mechanism of light-driven proton pump based on the low-resolution structural studies are also described. Significantly, they are not far from the today's understanding. I believe that the spirit of the early research scientists in this field and the essence of their studies, which constitute the foundations of the field, still actively fertilizes current membrane protein research.

Reversible Conjugation of Non-ionic Detergent Micelles Promotes Partitioning of Membrane Proteins under Non-denaturing Conditions

In the decades'-long quest for high-quality membrane protein (MP) crystals, non-ionic detergent micelles have primarily served as a passive shield against protein aggregation in aqueous solution and/or as a conformation stabilizing environment. We have focused on exploiting the physical chemistry of detergent micelles in order to direct intrinsic MP/detergent complexes to assemble via conjugation under ambient conditions, thereby permitting finely tuned control over the micelle cloud point. In the current work, three commercially available amphiphilic, bipyridine chelators in combination with Fe²⁺ or Ni²⁺ were tested for their ability to conjugate non-ionic detergent micelles both in the presence and absence of an encapsulated bacteriorhodopsin molecule. Water-soluble chelators were added, and results were monitored with light microscopy and dynamic light scattering (DLS). [Bipyridine:metal] complexes produced micellar conjugates, which appeared as oil-rich globules (10-200 μm) under a light microscope. DLS analysis demonstrated that micellar conjugation is complete 20 min after the introduction of the amphiphilic complex, and that the conjugation process can be fully or partially reversed with water-soluble chelators. This process of controlled conjugation/deconjugation under nondenaturing conditions provides broader flexibility in the choice of detergent for intrinsic MP purification and conformational flexibility during the crystallization procedure.

Altering CLC stoichiometry by reducing non-polar side-chains at the dimerization interface

CLC-ec1 is a Cl^-/H⁺ antiporter that forms stable homodimers in lipid bilayers, with a free energy of -10.9 kcal/mol in 2:1 POPE/POPG lipid bilayers. The dimerization interface is formed by four transmembrane helices: H, I, P and Q, that are lined by non-polar side-chains that come in close contact, yet it is unclear as to whether their interactions drive dimerization. To investigate whether non-polar side-chains are required for dimer assembly, we designed a series of constructs where side-chain packing in the dimer state is significantly reduced by making 4-5 alanine substitutions along each helix (H-ala, I-ala, P-ala, Q-ala). All constructs are functional and three purify as stable dimers in detergent micelles despite the removal of significant side-chain interactions. On the other hand, H-ala shows the unique behavior of purifying as a mixture of monomers and dimers, followed by a rapid and complete conversion to monomers. In lipid bilayers, all four constructs are monomeric as examined by single-molecule photobleaching analysis. Further study of the H-helix shows that the single mutation L194A is sufficient to yield monomeric CLC-ec1 in detergent micelles and lipid bilayers. X-ray crystal structures of L194A reveal the protein re-assembles to form dimers, with a structure that is identical to wild-type. Altogether, these results demonstrate that non-polar membrane embedded side-chains play an important role in defining dimer stability, but the stoichiometry is highly contextual to the solvent environment. Furthermore, we discovered that L194 is a molecular hot-spot for defining dimerization of CLC-ec1.

Perturbations of Native Membrane Protein Structure in Alkyl Phosphocholine Detergents: A Critical Assessment of NMR and Biophysical Studies

Membrane proteins perform a host of vital cellular functions. Deciphering the molecular mechanisms whereby they fulfill these functions requires detailed biophysical and structural investigations. Detergents have proven pivotal to extract the protein from its native surroundings. Yet, they provide a milieu that departs significantly from that of the biological membrane, to the extent that the structure, the dynamics, and the interactions of membrane proteins in detergents may considerably vary, as compared to the native environment. Understanding the impact of detergents on membrane proteins is, therefore, crucial to assess the biological relevance of results obtained in detergents. Here, we review the strengths and weaknesses of alkyl phosphocholines (or foscholines), the most widely used detergent in solution-NMR studies of membrane proteins. While this class of detergents is often successful for membrane protein solubilization, a growing list of examples points to destabilizing and denaturing properties, in particular for α-helical membrane proteins. Our comprehensive analysis stresses the importance of stringent controls when working with this class of detergents and when analyzing the structure and dynamics of membrane proteins in alkyl phosphocholine detergents.

Neutrons describe ectoine effects on water H-bonding and hydration around a soluble protein and a cell membrane

Understanding adaptation to extreme environments remains a challenge of high biotechnological potential for fundamental molecular biology. The cytosol of many microorganisms, isolated from saline environments, reversibly accumulates molar concentrations of the osmolyte ectoine to counterbalance fluctuating external salt concentrations. Although they have been studied extensively by thermodynamic and spectroscopic methods, direct experimental structural data have, so far, been lacking on ectoine-water-protein interactions. In this paper, in vivo deuterium labeling, small angle neutron scattering, neutron membrane diffraction and inelastic scattering are combined with neutron liquids diffraction to characterize the extreme ectoine-containing solvent and its effects on purple membrane of H. salinarum and E. coli maltose binding protein. The data reveal that ectoine is excluded from the hydration layer at the membrane surface and does not affect membrane molecular dynamics, and prove a previous hypothesis that ectoine is excluded from a monolayer of dense hydration water around the soluble protein. Neutron liquids diffraction to atomic resolution shows how ectoine enhances the remarkable properties of H-bonds in water—properties that are essential for the proper organization, stabilization and dynamics of biological structures.

SCMMTP: identifying and characterizing membrane transport proteins using propensity scores of dipeptides

BACKGROUND

Identifying putative membrane transport proteins (MTPs) and understanding the transport mechanisms involved remain important challenges for the advancement of structural and functional genomics. However, the transporter characters are mainly acquired from MTP crystal structures which are hard to crystalize. Therefore, it is desirable to develop bioinformatics tools for the effective large-scale analysis of available sequences to identify novel transporters and characterize such transporters.

RESULTS

This work proposes a novel method (SCMMTP) based on the scoring card method (SCM) using dipeptide composition to identify and characterize MTPs from an existing dataset containing 900 MTPs and 660 non-MTPs which are separated into a training dataset consisting 1,380 proteins and an independent dataset consisting 180 proteins. The SCMMTP produced estimating propensity scores for amino acids and dipeptides as MTPs. The SCMMTP training and test accuracy levels respectively reached 83.81% and 76.11%. The test accuracy of support vector machine (SVM) using a complicated classification method with a low possibility for biological interpretation and position-specific substitution matrix (PSSM) as a protein feature is 80.56%, thus SCMMTP is comparable to SVM-PSSM. To identify MTPs, SCMMTP is applied to three datasets including: 1) human transmembrane proteins, 2) a photosynthetic protein dataset, and 3) a human protein database. MTPs showing α-helix rich structure is agreed with previous studies. The MTPs used residues with low hydration energy. It is hypothesized that, after filtering substrates, the hydrated water molecules need to be released from the pore regions.

CONCLUSIONS

SCMMTP yields estimating propensity scores for amino acids and dipeptides as MTPs, which can be used to identify novel MTPs and characterize transport mechanisms for use in further experiments.

AVAILABILITY

http://iclab.life.nctu.edu.tw/iclab_webtools/SCMMTP/.

Protein-Protein Interactions Mediated by Helical Tertiary Structure Motifs

The modulation of protein-protein interactions (PPIs) by means of creating or stabilizing secondary structure conformations is a rapidly growing area of research. Recent success in the inhibition of difficult PPIs by secondary structure mimetics also points to potential limitations, because often, specific cases require tertiary structure mimetics. To streamline protein structure-based inhibitor design, we have previously described the examination of protein complexes in the Protein Data Bank where α-helices or β-strands form critical contacts. Here, we examined coiled coils and helix bundles that mediate complex formation to create a platform for the discovery of potential tertiary structure mimetics. Though there has been extensive analysis of coiled coil motifs, the interactions between pre-formed coiled coils and globular proteins have not been systematically analyzed. This article identifies critical features of these helical interfaces with respect to coiled coil and other helical PPIs. We expect the analysis to prove useful for the rational design of modulators of this fundamental class of protein assemblies.

The origins of cellular life

All life on earth can be naturally classified into cellular life forms and virus-like selfish elements, the latter being fully dependent on the former for their reproduction. Cells are reproducers that not only replicate their genome but also reproduce the cellular organization that depends on semipermeable, energy-transforming membranes and cannot be recovered from the genome alone, under the famous dictum of Rudolf Virchow, Omnis cellula e cellula. In contrast, simple selfish elements are replicators that can complete their life cycles within the host cell starting from genomic RNA or DNA alone. The origin of the cellular organization is the central and perhaps the hardest problem of evolutionary biology. I argue that the origin of cells can be understood only in conjunction with the origin and evolution of selfish genetic elements. A scenario of precellular evolution is presented that involves cohesion of the genomes of the emerging cellular life forms from primordial pools of small genetic elements that eventually segregated into hosts and parasites. I further present a model of the coevolution of primordial membranes and membrane proteins, discuss protocellular and non-cellular models of early evolution, and examine the habitats on the primordial earth that could have been conducive to precellular evolution and the origin of cells.

A molecular piston mechanism of pumping protons by bacteriorhodopsin

In this review the proton-pumping mechanism proposed recently for bacteriorhodopsin [Chou, K. C. (1993) Journal of Protein Chemistry, 12: 337-350] is illustrated in terms of a phenomenological model. According to the model, theβ-ionone of the retinal chromophore in bacteriorhodopsin can be phenomenologically imagined as a molecular "piston". The photon capture by bacteriorhodopsin would "pull" it up while the spontaneous decrease in potential energy would "push" it down so that it would be up and down alternately during the photocycle process. When it is pulled up, the gate of pore is open and the water channel for the proton translocation is through; when it is pushed down, the gate of pore is closed and the water channel is shut up. Such a model not only is quite consistent with experimental observations, but also provides useful insights and a different view to elucidate the protonpumping mechanism of bacteriorhodopsin. The essence of the model might be useful in investigating the mechanism of ion-channels of other membrane proteins.

Evaluation of hydropathy of amino acids from a comparison of their viscosities inside vesicles and on supported lipid bilayers

The viscosity of amino acids enclosed in giant lipid vesicles (η(out)) subjected to a shear flow near a solid surface has been studied using quartz crystal microbalance (QCM). This viscosity has been compared with shear viscosity for the different amino acids adsorbed on supported bilayers (SLBs) (η(in)) of the lipids on quartz. Using a first approximation of vesicles as model rigid spheres, the measured viscosities and the extent of deformation of vesicles observed using optical microscopy, two non-dimensional parameters: the reduced volume and the ratio of (η(in))/(η(out)) have been analyzed as a function of physical parameters: vesicle substrate distance (vesicle vs. supported lipid bilayers), vesicle size and their variation as a function of the viscosity. The kinematics of the vesicles with the amino acids compared with the shear at supported lipid bilayers seems to describe a reasonable hydropathy scale for the amino acids. The results show that there is a direct correlation between the above parameters and the polarity variations in amino acids suggesting that the viscous force may be an important parameter and should be taken into account in studies on membrane proteins interacting with cells and cell adhesion in flow chambers where cell membrane and the adhesive substrate are in relative motion.

Divergence and convergence in enzyme evolution: parallel evolution of paraoxonases from quorum-quenching lactonases

We discuss the basic features of divergent versus convergent evolution and of the common scenario of parallel evolution. The example of quorum-quenching lactonases is subsequently described. Three different quorum-quenching lactonase families are known, and they belong to three different superfamilies. Their key active-site architectures have converged and are strikingly similar. Curiously, a promiscuous organophosphate hydrolase activity is observed in all three families. We describe the structural and mechanistic features that underline this converged promiscuity and how this promiscuity drove the parallel divergence of organophosphate hydrolases within these lactonase families by either natural or laboratory evolution.

Environment specific substitution tables improve membrane protein alignment

MOTIVATION

Membrane proteins are both abundant and important in cells, but the small number of solved structures restricts our understanding of them. Here we consider whether membrane proteins undergo different substitutions from their soluble counterparts and whether these can be used to improve membrane protein alignments, and therefore improve prediction of their structure.

RESULTS

We construct substitution tables for different environments within membrane proteins. As data is scarce, we develop a general metric to assess the quality of these asymmetric tables. Membrane proteins show markedly different substitution preferences from soluble proteins. For example, substitution preferences in lipid tail-contacting parts of membrane proteins are found to be distinct from all environments in soluble proteins, including buried residues. A principal component analysis of the tables identifies the greatest variation in substitution preferences to be due to changes in hydrophobicity; the second largest variation relates to secondary structure. We demonstrate the use of our tables in pairwise sequence-to-structure alignments (also known as 'threading') of membrane proteins using the FUGUE alignment program. On average, in the 10-25% sequence identity range, alignments are improved by 28 correctly aligned residues compared with alignments made using FUGUE's default substitution tables. Our alignments also lead to improved structural models.

AVAILABILITY

Substitution tables are available at: http://www.stats.ox.ac.uk/proteins/resources.

Specific amino acid substitutions in bacterioopsin: Replacement of a restriction fragment in the structural gene by synthetic DNA fragments containing altered codons

To study the mechanism of light-dependent proton translocation by bacteriorhodopsin, we have introduced single-codon changes in the gene so as to produce the following specific amino acid substitutions in the protein: Tyr-185 to Phe, Pro-186 to Leu, Trp-189 to Phe, Ser-193 to Ala, and Glu-194 to Gln. The strategy involved replacement of a 62-base-pair restriction fragment by synthetic DNA duplexes containing the modified nucleotide sequences. This required a unique restriction site (Xho I) at Ile-203 which was created by oligonucleotide-directed point mutagenesis. The six DNA duplexes corresponding to the modified native and mutant restriction fragments were all prepared by DNA ligase-catalyzed joining of chemically synthesized deoxyribooligonucleotides. The bacterioopsin expression plasmids reconstructed by using the synthetic DNA fragments were characterized by restriction analysis and DNA sequence determination. An extremely rapid, efficient, and general method for purification of the synthetic oligonucleotides and of DNA fragments was developed.

Location of chemically modified lysine 41 in the structure of bacteriorhodopsin by neutron diffraction

Purple membranes were prepared in which bacteriorhodopsin was labeled at lysine 41 with phenylisothiocyanate (PITC) and with perdeuterated PITC. The in-plane position of this small label containing only five deuterons was determined from the differences between the neutron diffraction intensities of the two samples. At 8.7-A resolution the Fourier difference map revealed a well-defined site between helices 3 and 4. This position was confirmed by a refinement procedure in reciprocal space. Model calculations showed that the observed difference density had the right amplitude for the label. Thus it is possible to locate a small group in a large protein structure by replacing as few as five hydrogens by deuterium. The observed location of PITC restricts the number of possibilities for the assignment of helix B in the sequence (to which lysine 41 is attached) to one of the seven helices of the structure. Taking into account the size of the label and the length of the lysine side chain our result excludes helices 1, 2, and 7 as candidates for B.

Electrodichroism of purple membrane: ionic strength dependence

The dichroism of purple membrane suspension was measured in dc and ac electric fields. From these measurements three parameters can be obtained: the permanent dipole moment, mu, the electrical polarizability, alpha, and the retinal angle, delta, (relative to the membrane normal). The functional dependence of the dichroism on the electric field is analyzed. There is a small decrease ( approximately 2 degrees ) in retinal angle going from dark adapted to the light adapted form. No measurable difference in mu, alpha, and delta was found under the photocycle. The dichroism was measured in two different salt solutions (KCl and CaCl(2)) in the range 0-10 mM. The retinal angle increases from 64 degrees to 68 degrees with increasing ionic strength going through a minimum. This is attributed to the changing (decreasing) inner electric field in the membrane. The polarizability, alpha, consists of two parts. One component is related to the polarization of the purple membrane and the second component to the ionic cloud. The second component decreases with ion concentration approximately as kappa(-3) (kappa is the Debye parameter) in agreement with a model calculation for the polarization of the ionic cloud. The origin of the slightly ionic strength dependent permanent dipole moment is not well understood.

MPRAP: an accessibility predictor for a-helical transmembrane proteins that performs well inside and outside the membrane

BACKGROUND

In water-soluble proteins it is energetically favorable to bury hydrophobic residues and to expose polar and charged residues. In contrast to water soluble proteins, transmembrane proteins face three distinct environments; a hydrophobic lipid environment inside the membrane, a hydrophilic water environment outside the membrane and an interface region rich in phospholipid head-groups. Therefore, it is energetically favorable for transmembrane proteins to expose different types of residues in the different regions.

RESULTS

Investigations of a set of structurally determined transmembrane proteins showed that the composition of solvent exposed residues differs significantly inside and outside the membrane. In contrast, residues buried within the interior of a protein show a much smaller difference. However, in all regions exposed residues are less conserved than buried residues. Further, we found that current state-of-the-art predictors for surface area are optimized for one of the regions and perform badly in the other regions. To circumvent this limitation we developed a new predictor, MPRAP, that performs well in all regions. In addition, MPRAP performs better on complete membrane proteins than a combination of specialized predictors and acceptably on water-soluble proteins. A web-server of MPRAP is available at http://mprap.cbr.su.se/

CONCLUSION

By including complete a-helical transmembrane proteins in the training MPRAP is able to predict surface accessibility accurately both inside and outside the membrane. This predictor can aid in the prediction of 3D-structure, and in the identification of erroneous protein structures.

Protein folding in membranes

Separation of cells and organelles by bilayer membranes is a fundamental principle of life. Cellular membranes contain a baffling variety of proteins, which fulfil vital functions as receptors and signal transducers, channels and transporters, motors and anchors. The vast majority of membrane-bound proteins contain bundles of alpha-helical transmembrane domains. Understanding how these proteins adopt their native, biologically active structures in the complex milieu of a membrane is therefore a major challenge in today's life sciences. Here, we review recent progress in the folding, unfolding and refolding of alpha-helical membrane proteins and compare the molecular interactions that stabilise proteins in lipid bilayers. We also provide a critical discussion of a detergent denaturation assay that is increasingly used to determine membrane-protein stability but is not devoid of conceptual difficulties.

"Fuzzy oil drop" model applied to individual small proteins built of 70 amino acids

The proteins composed of short polypeptides (about 70 amino acid residues) representing the following functional groups (according to PDB notation): growth hormones, serine protease inhibitors, antifreeze proteins, chaperones and proteins of unknown function, were selected for structural and functional analysis. Classification based on the distribution of hydrophobicity in terms of deficiency/excess as the measure of structural and functional specificity is presented. The experimentally observed distribution of hydrophobicity in the protein body is compared to the idealized one expressed by a three-dimensional Gauss function. The differences between these two distributions reveal the specificity of structural/functional characteristics of the protein. The residues of hydrophobicity deficiency versus the idealized distribution are assumed to indicate cavities with the potential to bind ligands, while the residues of hydrophobicity excess are interpreted as potentially participating in protein-protein complexation. The distribution of hydrophobicity irregularity seems to be specific for particular structures and functions of proteins. A comparative analysis of such profiles is carried out to identify the potential biological activity of proteins of unknown function.

Co-evolution of primordial membranes and membrane proteins

Studies of the past several decades have provided major insights into the structural organization of biological membranes and mechanisms of many membrane molecular machines. However, the origin(s) of the membrane(s) and membrane proteins remains enigmatic. We discuss different concepts of the origin and early evolution of membranes with a focus on the evolution of the (im)permeability to charged molecules such as proteins, nucleic acids and small ions. Reconstruction of the evolution of F-type and A/V-type membrane ATPases (ATP synthases), which are either proton- or sodium-dependent, might help us to understand not only the origin of membrane bioenergetics but also of membranes themselves. We argue that evolution of biological membranes occurred as a process of co-evolution of lipid bilayers, membrane proteins and membrane bioenergetics.

Dynamics of hydration water in deuterated purple membranes explored by neutron scattering

The function and dynamics of proteins depend on their direct environment, and much evidence has pointed to a strong coupling between water and protein motions. Recently however, neutron scattering measurements on deuterated and natural-abundance purple membrane (PM), hydrated in H2O and D2O, respectively, revealed that membrane and water motions on the ns-ps time scale are not directly coupled below 260 K (Wood et al. in Proc Natl Acad Sci USA 104:18049-18054, 2007). In the initial study, samples with a high level of hydration were measured. Here, we have measured the dynamics of PM and water separately, at a low-hydration level corresponding to the first layer of hydration water only. As in the case of the higher hydration samples previously studied, the dynamics of PM and water display different temperature dependencies, with a transition in the hydration water at 200 K not triggering a transition in the membrane at the same temperature. Furthermore, neutron diffraction experiments were carried out to monitor the lamellar spacing of a flash-cooled deuterated PM stack hydrated in H2O as a function of temperature. At 200 K, a sudden decrease in lamellar spacing indicated the onset of long-range translational water diffusion in the second hydration layer as has already been observed on flash-cooled natural-abundance PM stacks hydrated in D2O (Weik et al. in J Mol Biol 275:632-634, 2005), excluding thus a notable isotope effect. Our results reinforce the notion that membrane-protein dynamics may be less strongly coupled to hydration water motions than the dynamics of soluble proteins.

Localization of ligand binding site in proteins identified in silico

Knowledge-based models for protein folding assume that the early-stage structural form of a polypeptide is determined by the backbone conformation, followed by hydrophobic collapse. Side chain-side chain interactions, mostly of hydrophobic character, lead to the formation of the hydrophobic core, which seems to stabilize the structure of the protein in its natural environment. The fuzzy-oil-drop model is employed to represent the idealized hydrophobicity distribution in the protein molecule. Comparing it with the one empirically observed in the protein molecule reveals that they are not in agreement. It is shown in this study that the irregularity of hydrophobic distributions is aim-oriented. The character and strength of these irregularities in the organization of the hydrophobic core point to the specificity of a particular protein's structure/function. When the location of these irregularities is determined versus the idealized fuzzy-oil-drop, function-related areas in the protein molecule can be identified. The presented model can also be used to identify ways in which protein-protein complexes can possibly be created. Active sites can be predicted for any protein structure according to the presented model with the free prediction server at http://www.bioinformatics.cm-uj.krakow.pl/activesite. The implication based on the model presented in this work suggests the necessity of active presence of ligand during the protein folding process simulation.

Empirical lipid propensities of amino acid residues in multispan alpha helical membrane proteins

Characterizing the interactions between amino acid residues and lipid molecules is important for understanding the assembly of transmembrane helices and for studying membrane protein folding. In this study we develop TMLIP (TransMembrane helix-LIPid), an empirically derived propensity of individual residue types to face lipid membrane based on statistical analysis of high-resolution structures of membrane proteins. Lipid accessibilities of amino acid residues within the transmembrane (TM) region of 29 structures of helical membrane proteins are studied with a spherical probe of radius of 1.9 A. Our results show that there are characteristic preferences for residues to face the headgroup region and the hydrocarbon core region of lipid membrane. Amino acid residues Lys, Arg, Trp, Phe, and Leu are often found exposed at the headgroup regions of the membrane, where they have high propensity to face phospholipid headgroups and glycerol backbones. In the hydrocarbon core region, the strongest preference for interacting with lipids is observed for Ile, Leu, Phe and Val. Small and polar amino acid residues are usually buried inside helical bundles and are strongly lipophobic. There is a strong correlation between various hydrophobicity scales and the propensity of a given residue to face the lipids in the hydrocarbon region of the bilayer. Our data suggest a possibly significant contribution of the lipophobic effect to the folding of membrane proteins. This study shows that membrane proteins have exceedingly apolar exteriors rather than highly polar interiors. Prediction of lipid-facing surfaces of boundary helices using TMLIP1 results in a 54% accuracy, which is significantly better than random (25% accuracy). We also compare performance of TMLIP with another lipid propensity scale, kPROT, and with several hydrophobicity scales using hydrophobic moment analysis.

Rendezvous in a membrane: close packing, hydrogen bonding, and the formation of transmembrane helix oligomers

The interaction of transmembrane alpha-helices is promoted by a detailed fit between two helical surfaces, which results in close packing and van der Waals interactions of amino acid side chains between two helices. Recent studies additionally indicate an important role of hydrogen bonding for mediating and stabilizing transmembrane helix-helix interactions. The interplay between close packing and electrostatic interactions in influencing the specificity of helix-helix interactions on the one hand and the stability of an existing interaction on the other hand is still unknown. Here, we suggest that close packing mainly determines the specificity of a helix-helix interaction, whereas hydrogen bonding is important for stabilization of a preformed helix dimer.

Sequence context and modified hydrophobic moment plots help identify `horizontal' surface helices in transmembrane protein structure prediction

Transmembrane proteins make up at least one-fifth of the genome of most organisms and are critical components of key pathways for cell survival and interactions with the environment. The function of helices found at the membrane surface in transmembrane proteins has not been greatly explored, but it is likely that they play an ancillary role to membrane spanning helices and are analogous to the surface active helices of peripheral membrane proteins, being involved in: lipid association, membrane perturbation, transmembrane signal transduction and regulation, and transmembrane helical bundle formation. Due to the difficulties in obtaining high-resolution structural data for this class of proteins, structure-from-sequence predictive methods continue to be developed as a means to obtain structural models for these largely intractable systems. A simple but effective variant of the hydrophobic moment analysis of amino acid sequences is described here as part of a protocol for distinguishing helical sequences that are parallel to or 'horizontal' at the membrane bilayer/aqueous phase interface from helices that are membrane-embedded or located in extra-membranous domains. This protocol when tested on transmembrane spanning protein amino acid sequences not used in its development, was found to be 84-91% accurate when the results were compared to the partition locations in the corresponding structures determined by X-ray crystallography, and 72% accurate in determining which helices lie horizontal or near horizontal at the lipid interface.

Hydrophobicity of transmembrane proteins: spatially profiling the distribution

A hallmark of soluble globular protein tertiary structure is a hydrophobic core and a protein exterior populated predominantly by hydrophilic residues. Recent hydrophobic moment profiling of the spatial distribution of 30 globular proteins of diverse size and structure had revealed features of this distribution that were comparable. Analogous profiling of the hydrophobicity distribution of the alpha-helical buried bundles of several transmembrane proteins, as the lipid/protein interface is approached from within the bilayer, reveals spatial hydrophobicity profiles that contrast with those obtained for the soluble proteins. The calculations, which enable relative changes of hydrophobicity to be simply identified over the entire spatial extent of the multimer within the lipid bilayer, show the accumulated zero-order moments of the bundles to be mainly inverted with respect to that found for the soluble proteins. This indicates a statistical increase in the average residue hydrophobic content as the lipid bilayer is approached. This result differs from that of a relatively recent calculation and qualitatively agrees with earlier calculations involving lipid exposed and buried residues of the alpha-helices of transmembrane proteins. Spatial profiling, over the entire spatial extent of the multimer with scaled values of residue hydrophobicity, provides information that is not available from calculations using lipid exposure alone.

Comparison of helix interactions in membrane and soluble alpha-bundle proteins

Helix-helix interactions are important for the folding, stability, and function of membrane proteins. Here, two independent and complementary methods are used to investigate the nature and distribution of amino acids that mediate helix-helix interactions in membrane and soluble alpha-bundle proteins. The first method characterizes the packing density of individual amino acids in helical proteins based on the van der Waals surface area occluded by surrounding atoms. We have recently used this method to show that transmembrane helices pack more tightly, on average, than helices in soluble proteins. These studies are extended here to characterize the packing of interfacial and noninterfacial amino acids and the packing of amino acids in the interfaces of helices that have either right- or left-handed crossing angles, and either parallel or antiparallel orientations. We show that the most abundant tightly packed interfacial residues in membrane proteins are Gly, Ala, and Ser, and that helices with left-handed crossing angles are more tightly packed on average than helices with right-handed crossing angles. The second method used to characterize helix-helix interactions involves the use of helix contact plots. We find that helices in membrane proteins exhibit a broader distribution of interhelical contacts than helices in soluble proteins. Both helical membrane and soluble proteins make use of a general motif for helix interactions that relies mainly on four residues (Leu, Ala, Ile, Val) to mediate helix interactions in a fashion characteristic of left-handed helical coiled coils. However, a second motif for mediating helix interactions is revealed by the high occurrence and high average packing values of small and polar residues (Ala, Gly, Ser, Thr) in the helix interfaces of membrane proteins. Finally, we show that there is a strong linear correlation between the occurrence of residues in helix-helix interfaces and their packing values, and discuss these results with respect to membrane protein structure prediction and membrane protein stability.

Structural and biological characterization of chromofungin, the antifungal chromogranin A-(47-66)-derived peptide

Vasostatin-I, the natural fragment of chromogranin A-(1-76), is a neuropeptide able to kill a large variety of fungi and yeast cells in the micromolar range. We have examined the antifungal properties of synthetic vasostatin-I-related peptides. The most active shortest peptide, named chromofungin, corresponds to the sequence Arg(47)-Leu(66). Extensive (1)H NMR analysis revealed that it adopts a helical structure. The biophysical mechanism implicated in the interaction of chromofungin with fungi and yeast cells was studied, showing the penetration of this peptide with different lipid monolayers. In order to examine thoroughly the antifungal activity of chromofungin, confocal laser microscopy was used to demonstrate the ability of the rhodamine-labeled peptide to interact with the fungal cell wall, to cross the plasma membrane, and to accumulate in Aspergillus fumigatus, Alternaria brassicola, and Candida albicans. Our present data reveal that chromofungin inhibits calcineurin activity, extending a previous observation that the N-terminal region of chromogranin A interacts with calmodulin in the presence of calcium. Therefore, the destabilization of fungal wall and plasma membrane, together with the possible intracellular inhibition of calmodulin-dependent enzymes, is likely to represent the mechanism by which vasostatin-I and chromofungin exert antifungal activity.

Prostaglandin F(2alpha) receptor in the corpus luteum: recent information on the gene, messenger ribonucleic acid, and protein

The prostaglandin (PG) F(2alpha) receptor (FPr) in the corpus luteum is essential for maintaining normal reproductive cyclicity in many species. Activation of this seven-transmembrane spanning receptor at the end of the cycle leads to a decrease in progesterone and the demise of the corpus luteum (luteolysis). Recently, the gene structure of the FPr in three mammalian species has been elucidated; however, promoter regulation of the gene is still poorly understood. The FPr mRNA is extremely low in steroidogenic follicular cells (theca or granulosa) but is expressed at high levels in the corpus luteum, particularly in the large luteal cells. Treatment with PGF(2alpha) decreased FPr mRNA expression in luteal cells in most species that have been studied. Key amino acids have been suggested to be critical for binding of FPr to PGF(2alpha) based on three-dimensional modeling and comparisons with other G-protein-coupled receptors. Moieties of the PGF(2alpha) molecule that are essential for binding or specificity of binding to the FPr have been identified by radioreceptor binding studies. In this article, recent information is reviewed on the structure of the FPr gene, regulation of luteal FPr mRNA, and receptor/ligand interaction requirements for the FPr protein.

Helical membrane protein folding, stability, and evolution

Helical membrane protein folding and oligomerization can be usefully conceptualized as involving two energetically distinct stages-the formation and subsequent side-to-side association of independently stable transbilayer helices. The interactions of helices with the bilayer, with prosthetic groups, and with each other are examined in the context of recent evidence. We conclude that the two-stage concept remains useful as an approach to simplifying discussions of stability, as a framework for folding concepts, and as a basis for understanding membrane protein evolution.

Evidence for post-translational membrane insertion of the integral membrane protein bacterioopsin expressed in the heterologous halophilic archaeon Haloferax volcanii

The gene coding for the integral membrane protein bacterioopsin (Bop), that is composed of seven transmembrane helices, was expressed in the halophilic archaeon Haloferax volcanii as a fusion protein with the halobacterial enzyme dihydrofolate reductase and with the cellulose binding domain of Clostridium thermocellum cellulosome. In each case, bacterioopsin was present both in the membrane and in the cytoplasmic fractions. Pulse-chase labeling experiments showed that the fusion protein in the cytoplasmic fraction is the precursor of the membrane-bound species. Bacterioopsin mutants that lack the seventh helix (BopDelta7) were found to accumulate only in the cytoplasmic fraction, whereas bacterioopsin mutants that lack either helices four and five (BopDelta4-5), or helices one and two (BopDelta1-2), were found in the cytoplasmic as well as in the membrane fractions. The seventh helix, when expressed alone, could target in trans the insertion of a separately expressed bacterioopsin mutant protein that has only the first six helices. These results support a model in which bacterioopsin is produced in H. volcanii as a soluble protein and in which its insertion into the membrane occurs post-translationally. According to this model, membrane insertion is directed by the seventh helix.

Bacteriorhodopsin: the functional details of a molecular machine are being resolved

The photon-driven proton translocator bacteriorhodopsin is considered to be the best understood membrane protein so far. It is nowadays regarded as a model system for photosynthesis, ion pumps and seven transmembrane receptors. The profound knowledge came from the applicability of a variety of modern biophysical techniques which have often been further developed with research on bacteriorhodopsin and have delivered major contributions also to other areas. Most prominent examples are electron crystallography, solid-state NMR spectroscopy and time-resolved vibrational spectroscopy. The recently introduced method of crystallising a membrane protein in the lipidic cubic phase led to high-resolution structures of ground state bacteriorhodopsin and some of the photocycle intermediates. This achievement in combination with spectroscopic results will strongly advance our understanding of the functional mechanism of bacteriorhodopsin on the atomic level. We present here the current knowledge on specific aspects of the structural and functional dynamics of the photoreaction of bacteriorhodopsin with a focus on techniques established in our institute.

Human formyl peptide receptor function role of conserved and nonconserved charged residues

In this study, we investigated the role of charged residues in ligand binding interactions of f-Met-Leu-Phe receptors (FPR). Charged residues of FPR, both conserved and nonconserved, which are located close to the membrane interface were mutated to alanine to determine their role in ligand binding. The mutated residues belonged to specific domains of FPR which have previously been implicated in FPR ligand binding interactions. We demonstrate that nonconserved charged residues such as Arg84, Lys85, Arg205 and Asp284 and conserved charge residue Arg163 seem to play a role in ligand binding. However, alteration of nonconserved charged residue Asp106 did not have any effect. In conclusion, specific charged residues of FPR, both conserved nonconserved, may contribute to FPR function either directly or indirectly.

Are membrane proteins "inside-out" proteins?

One of the central paradigms of structural biology is that membrane proteins are "inside-out" proteins, in that they have a core of polar residues surrounded by apolar residues. This is the reverse of the characteristics found in water-soluble proteins. We have decided to test this paradigm, now that sufficient numbers of transmembrane alpha-helical structures are accessible to statistical analysis. We have analyzed the correlation between accessibility and hydrophobicity of both individual residues and complete helices. Our analyses reveal that hydrophobicity of residues in a transmembrane helical bundle does not correlate with any preferred location and that the hydrophilic vector of a helix is a poor indicator of the solvent exposed face of a helix. Neither polar nor hydrophobic residues show any bias for the exterior or the interior of a transmembrane domain. As a control, analysis of water-soluble helical bundles performed in a similar manner has yielded clear correlations between hydrophobicity and accessibility. We therefore conclude that, based on the data set used, membrane proteins as "inside-out" proteins is an unfounded notion, suggesting that packing of alpha-helices in membranes is better understood by maximization of van der Waal's forces, rather than by a general segregation of hydrophobicities driven by lipid exclusion.

TOXCAT: a measure of transmembrane helix association in a biological membrane

The noncovalent association of transmembrane alpha-helices is a fundamental event in the folding of helical membrane proteins. In this work, a system (TOXCAT) is developed for the study of transmembrane helix-helix oligomerization in a natural membrane environment. This assay uses a chimeric construct composed of the N-terminal DNA binding domain of ToxR (a dimerization-dependent transcriptional activator) fused to a transmembrane domain (tm) of interest and a monomeric periplasmic anchor (the maltose binding protein). Association of the tms results in the ToxR-mediated activation of a reporter gene encoding chloramphenicol acetyltransferase (CAT). The level of CAT expression indicates the strength of tm association. The assay distinguishes between a known dimerizing tm and a mutant in which dimerization is disrupted. In addition, modulation of the chimera concentration shows that the dimerization exhibits concentration dependence in membranes. TOXCAT also is used to select oligomeric tms from a library of randomized sequences, demonstrating the potential of this system to reveal novel oligomerization motifs. The TOXCAT system has been used to investigate glycophorin A tm-mediated dimerization. Although the overall sensitivity of glycophorin A tm dimerization to mutagenesis is found to be similar in membranes and in detergent micelles, several significant differences exist. Mutations to polar residues, which are generally disruptive in SDS, exhibit sequence specificity in membranes, demonstrating both the limitations of detergent micelles and the wider range of application of the TOXCAT system.