Visualization of a peripheral stalk in V-type ATPase: evidence for the stator structure essential to rotational catalysis

Nucleic acid uptake occurs independent of lysosomal acidification but dependent on ATP consumption during RNautophagy/DNautophagy

RNautophagy/DNautophagy (RDA) is an autophagic process that refers to the direct uptake of nucleic acids by lysosomes for degradation. Autophagy relies on lysosomes and lysosomal acidification is crucial for the degradation of intracellular components. However, whether lysosomal acidification interferes with nucleic acid uptake during RDA is unclear. In this study, we focused on vacuolar H⁺-ATPase (V-ATPase), the major proton pump responsible for maintaining an acidic pH in lysosomes. Our results show that lysosomes take up nucleic acids independently of the intralysosomal acidic pH during RDA. Isolated lysosomes treated with bafilomycin A1, a potent V-ATPase inhibitor, did not degrade, but took up RNA at similar levels as the control lysosomes. Similarly, the knockdown of Atp6v1a, the gene that encodes V-ATPase catalytic subunit A, did not affect the RNA uptake ability of isolated lysosomes. In addition, we demonstrated that nucleic acid uptake by isolated lysosomes necessitates ATP consumption, although V-ATPase is not required for the uptake process. These results broaden our understanding of the mechanisms underlying nucleic acid degradation via autophagy.

SLAF-seq Uncovers the Genetic Diversity and Adaptation of Chinese Elm (Ulmus parvifolia) in Eastern China

The Chinese elm is an important tree ecologically; however, little is known about its genetic diversity and adaptation mechanisms. In this study, a total of 107 individuals collected from seven natural populations in eastern China were investigated by specific locus amplified fragment sequencing (SLAF-seq). Based on the single nucleotide polymorphisms (SNPs) detected by SLAF-seq, genetic diversity and markers associated with climate variables were identified. All seven populations showed medium genetic diversity, with PIC values ranging from 0.2632 to 0.2761. AMOVA and Fst indicated that a low genetic differentiation existed among populations. Environmental association analyses with three climate variables (annual rainfall, annual average temperature, and altitude) resulted in, altogether, 43 and 30 putative adaptive loci by Bayenv2 and LFMM, respectively. Five adaptive genes were annotated, which were related to the functions of glycosylation, peroxisome synthesis, nucleic acid metabolism, energy metabolism, and signaling. This study was the first on the genetic diversity and local adaptation in Chinese elms, and the results will be helpful in future work on molecular breeding.

The Peripheral Stalk of Rotary ATPases

Rotary ATPases are a family of enzymes that are thought of as molecular nanomotors and are classified in three types: F, A, and V-type ATPases. Two members (F and A-type) can synthesize and hydrolyze ATP, depending on the energetic needs of the cell, while the V-type enzyme exhibits only a hydrolytic activity. The overall architecture of all these enzymes is conserved and three main sectors are distinguished: a catalytic core, a rotor and a stator or peripheral stalk. The peripheral stalks of the A and V-types are highly conserved in both structure and function, however, the F-type peripheral stalks have divergent structures. Furthermore, the peripheral stalk has other roles beyond its stator function, as evidenced by several biochemical and recent structural studies. This review describes the information regarding the organization of the peripheral stalk components of F, A, and V-ATPases, highlighting the key differences between the studied enzymes, as well as the different processes in which the structure is involved.

Mitochondrial Respiratory Chain Complexes

Mitochondria are the power stations of the eukaryotic cell, using the energy released by the oxidation of glucose and other sugars to produce ATP. Electrons are transferred from NADH, produced in the citric acid cycle in the mitochondrial matrix, to oxygen by a series of large protein complexes in the inner mitochondrial membrane, which create a transmembrane electrochemical gradient by pumping protons across the membrane. The flow of protons back into the matrix via a proton channel in the ATP synthase leads to conformational changes in the nucleotide binding pockets and the formation of ATP. The three proton pumping complexes of the electron transfer chain are NADH-ubiquinone oxidoreductase or complex I, ubiquinone-cytochrome c oxidoreductase or complex III, and cytochrome c oxidase or complex IV. Succinate dehydrogenase or complex II does not pump protons, but contributes reduced ubiquinone. The structures of complex II, III and IV were determined by x-ray crystallography several decades ago, but complex I and ATP synthase have only recently started to reveal their secrets by advances in x-ray crystallography and cryo-electron microscopy. The complexes I, III and IV occur to a certain extent as supercomplexes in the membrane, the so-called respirasomes. Several hypotheses exist about their function. Recent cryo-electron microscopy structures show the architecture of the respirasome with near-atomic detail. ATP synthase occurs as dimers in the inner mitochondrial membrane, which by their curvature are responsible for the folding of the membrane into cristae and thus for the huge increase in available surface that makes mitochondria the efficient energy plants of the eukaryotic cell.

Estimating the rotation rate in the vacuolar proton-ATPase in native yeast vacuolar membranes

The rate of rotation of the rotor in the yeast vacuolar proton-ATPase (V-ATPase), relative to the stator or steady parts of the enzyme, is estimated in native vacuolar membrane vesicles from Saccharomyces cerevisiae under standardised conditions. Membrane vesicles are formed spontaneously after exposing purified yeast vacuoles to osmotic shock. The fraction of total ATPase activity originating from the V-ATPase is determined by using the potent and specific inhibitor of the enzyme, concanamycin A. Inorganic phosphate liberated from ATP in the vacuolar membrane vesicle system, during ten min of ATPase activity at 20 °C, is assayed spectrophotometrically for different concanamycin A concentrations. A fit of the quadratic binding equation, assuming a single concanamycin A binding site on a monomeric V-ATPase (our data are incompatible with models assuming multiple binding sites), to the inhibitor titration curve determines the concentration of the enzyme. Combining this with the known ATP/rotation stoichiometry of the V-ATPase and the assayed concentration of inorganic phosphate liberated by the V-ATPase, leads to an average rate of ~10 Hz for full 360° rotation (and a range of 6-32 Hz, considering the ± standard deviation of the enzyme concentration), which, from the time-dependence of the activity, extrapolates to ~14 Hz (8-48 Hz) at the beginning of the reaction. These are lower-limit estimates. To our knowledge, this is the first report of the rotation rate in a V-ATPase that is not subjected to genetic or chemical modification and is not fixed to a solid support; instead it is functioning in its native membrane environment.

Structural divergence of the rotary ATPases

The rotary ATPase family of membrane protein complexes may have only three members, but each one plays a fundamental role in biological energy conversion. The F1Fo-ATPase (F-ATPase) couples ATP synthesis to the electrochemical membrane potential in bacteria, mitochondria and chloroplasts, while the vacuolar H+-ATPase (V-ATPase) operates as an ATP-driven proton pump in eukaryotic membranes. In different species of archaea and bacteria, the A1Ao-ATPase (A-ATPase) can function as either an ATP synthase or an ion pump. All three of these multi-subunit complexes are rotary molecular motors, sharing a fundamentally similar mechanism in which rotational movement drives the energy conversion process. By analogy to macroscopic systems, individual subunits can be assigned to rotor, axle or stator functions. Recently, three-dimensional reconstructions from electron microscopy and single particle image processing have led to a significant step forward in understanding of the overall architecture of all three forms of these complexes and have allowed the organisation of subunits within the rotor and stator parts of the motors to be more clearly mapped out. This review describes the emerging consensus regarding the organisation of the rotor and stator components of V-, A- and F-ATPases, examining core similarities that point to a common evolutionary origin, and highlighting key differences. In particular, it discusses how newly revealed variation in the complexity of the inter-domain connections may impact on the mechanics and regulation of these molecular machines.

Structural bases of physiological functions and roles of the vacuolar H(+)-ATPase

Vacuolar-type H(+)-ATPases (V-ATPases) is a large multi-protein complex containing at least 14 different subunits, in which subunits A, B, C, D, E, F, G, and H compose the peripheral 500-kDa V(1) responsible for ATP hydrolysis, and subunits a, c, c', c″, and d assembly the 250-kDa membrane-integral V(0) harboring the rotary mechanism to transport protons across the membrane. The assembly of V-ATPases requires the presence of all V(1) and V(0) subunits, in which the V(1) must be completely assembled prior to association with the V(0), accordingly the V(0) failing to assemble cannot provide a membrane anchor for the V(1), thereby prohibiting membrane association of the V-ATPase subunits. The V-ATPase mediates acidification of intracellular compartments and regulates diverse critical physiological processes of cell for functions of its numerous functional subunits. The core catalytic mechanism of the V-ATPase is a rotational catalytic mechanism. The V-ATPase holoenzyme activity is regulated by the reversible assembly/disassembly of the V(1) and V(0), the targeting and recycling of V-ATPase-containing vesicles to and from the plasma membrane, the coupling ratio between ATP hydrolysis and proton pumping, ATP, Ca(2+), and its inhibitors and activators.

Vacuolar-type proton pumps in insect epithelia

Active transepithelial cation transport in insects was initially discovered in Malpighian tubules, and was subsequently also found in other epithelia such as salivary glands, labial glands, midgut and sensory sensilla. Today it appears to be established that the cation pump is a two-component system of a H(+)-transporting V-ATPase and a cation/nH(+) antiporter. After tracing the discovery of the V-ATPase as the energizer of K(+)/nH(+) antiport in the larval midgut of the tobacco hornworm Manduca sexta we show that research on the tobacco hornworm V-ATPase delivered important findings that emerged to be of general significance for our knowledge of V-ATPases, which are ubiquitous and highly conserved proton pumps. We then discuss the V-ATPase in Malpighian tubules of the fruitfly Drosophila melanogaster where the potential of post-genomic biology has been impressively illustrated. Finally we review an integrated physiological approach in Malpighian tubules of the yellow fever mosquito Aedes aegypti which shows that the V-ATPase delivers the energy for both transcellular and paracellular ion transport.

A sodium ion-dependent A1AO ATP synthase from the hyperthermophilic archaeon Pyrococcus furiosus

The rotor subunit c of the A(1)A(O) ATP synthase of the hyperthermophilic archaeon Pyrococcus furiosus contains a conserved Na(+)-binding motif, indicating that Na(+) is a coupling ion. To experimentally address the nature of the coupling ion, we isolated the enzyme by detergent solubilization from native membranes followed by chromatographic separation techniques. The entire membrane-embedded motor domain was present in the preparation. The rotor subunit c was found to form an SDS-resistant oligomer. Under the conditions tested, the enzyme had maximal activity at 100 degrees C, had a rather broad pH optimum between pH 5.5 and 8.0, and was inhibited by diethystilbestrol and derivatives thereof. ATP hydrolysis was strictly dependent on Na(+), with a K(m) of 0.6 mM. Li(+), but not K(+), could substitute for Na(+). The Na(+) dependence was less pronounced at higher proton concentrations, indicating competition between Na(+) and H(+) for a common binding site. Moreover, inhibition of the ATPase by N',N'-dicyclohexylcarbodiimide could be relieved by Na(+). Taken together, these data demonstrate the use of Na(+) as coupling ion for the A(1)A(O) ATP synthase of Pyrococcus furiosus, the first Na(+) A(1)A(O) ATP synthase described.

Dimeric Core Structure of Modular Stator Subunit E of Archaeal H+-ATPase

Archaeal H(+)-ATPase (A-ATPase) is composed of an A(1) region that hydrolyzes ATP and an integral membrane part A(0) that conducts protons. Subunit E is a component of peripheral stator(s) that physically links A(1) and A(0) parts of the A-ATPase. Here we report the first crystal structure of subunit E of A-ATPase from Pyrococcus horikoshii OT3 at 1.85 A resolution. The protomer structure of subunit E represents a novel fold. The quaternary structure of subunit E is a homodimer, which may constitute the core part of the stator. To investigate the relationship with other stator subunit H, the complex of subunits EH was prepared and characterized using electrophoresis, mass spectrometry, N-terminal sequencing and circular dichroism spectroscopy, which revealed the polymeric and highly helical nature of the EH complex with equimolar stoichiometry of both the subunits. On the basis of the modular architecture of stator subunits, it is suggested that both cytoplasm and membrane sides of the EH complex may interact with other subunits to link A(1) and A(0) parts.

Identification of a Domain in the Vo Subunit d That Is Critical for Coupling of the Yeast Vacuolar Proton-translocating ATPase

Vacuolar proton-translocating ATPase pumps consist of two domains, V(1) and V(o). Subunit d is a component of V(o) located in a central stalk that rotates during catalysis. By generating mutations, we showed that subunit d couples ATP hydrolysis and proton transport. The mutation F94A strongly uncoupled the enzyme, preventing proton transport but not ATPase activity. C-terminal mutations changed coupling as well; ATPase activity was decreased by 59-72%, whereas proton transport was not measurable (E328A) or was moderately reduced (E317A and C329A). Except for W325A, which had low levels of V(1)V(o), mutations allowed wild-type assembly regardless of the fact that subunits E and d were reduced at the membrane. N- and C-terminal deletions of various lengths were inhibitory and gradually destabilized subunit d, limiting V(1)V(o) formation. Both N and C terminus were required for V(o) assembly. The N-terminal truncation 2-19Delta prevented V(1)V(o) formation, although subunit d was available. The C terminus was required for retention of subunits E and d at the membrane. In addition, the C terminus of its bacterial homolog (subunit C from T. thermophilus) stabilized the yeast subunit d mutant 310-345Delta and allowed assembly of the rotor structure with subunits A and B. Structural features conserved between bacterial and eukaryotic subunit d and the significance of domain 3 for vacuolar proton-translocating ATPase function are discussed.

The ntp operon encoding the Na+ V-ATPase of the thermophile Caloramator fervidus

The V-type ATPase of the thermophile Caloramator fervidus is an ATP-driven Na+ pump. The nucleotide sequence of the ntpFIKECGABD operon containing the structural genes coding for the nine subunits of the enzyme complex was determined. The identity of the proteins in two pairs of subunits (D, E and F, G) that have very similar mobilities on SDS-PAGE of the purified complex (24.3 and 22.7 kDa, and 12.3 and 11.6 kDa) was established by tryptic digestion of the protein bands followed by mass spectrometric analysis of the peptides.

Bioenergetics of archaea: ancient energy conserving mechanisms developed in the early history of life

A key component in cellular bioenergetics is the ATP synthase. The enzyme from archaea represents a new class of ATPases, the A1AO ATP synthases. They are composed of two domains that function as a pair of rotary motors connected by a central and peripheral stalk(s). The structure of the chemically-driven motor (A1) was solved by small angle X-ray scattering in solution, and the structure of the first A1AO ATP synthases (from methanoarchaea) was obtained recently by single particle analyses. These studies revealed novel structural features such as a second peripheral stalk and a collar-like structure. Interestingly, the membrane-embedded electrically-driven motor (AO) is very different in archaea with sometimes novel, exceptional subunit composition.

Elucidation of the Stator Organization in the V-ATPase of Neurospora crassa

V-ATPases are membrane protein complexes that pump protons in the lumen of various subcellular compartments at the expense of ATP. Proton pumping is done by a rotary mechanism that requires a static connection between the membrane pumping domain (V(0)) and the extrinsic catalytic head (V(1)). This static connection is composed of several known subunits of the V-ATPase, but their location and topological relationships are still a matter of controversy. Here, we propose a model for the V-ATPase of Neurospora crassa on the basis of single-particle analysis by electron microscopy. Comparison of the resulting map to that of the A-ATPase from Thermus thermophilus allows the positioning of two subunits in the static connecting region that are unique to eukaryotic V-ATPases (C and H). These two subunits seem to be located on opposite sides of a semicircular arrangement of the peripheral connecting elements, suggesting a role in stabilizing the stator in V-ATPases.

Crystal structure of yeast V-ATPase subunit C reveals its stator function

Vacuolar H(+)-ATPase (V-ATPase) has a crucial role in the vacuolar system of eukaryotic cells. It provides most of the energy required for transport systems that utilize the proton-motive force that is generated by ATP hydrolysis. Some, but not all, of the V-ATPase subunits are homologous to those of F-ATPase and the nonhomologous subunits determine the unique features of V-ATPase. We determined the crystal structure of V-ATPase subunit C (Vma5p), which does not show any homology with F-ATPase subunits, at 1.75 A resolution. The structural features suggest that subunit C functions as a flexible stator that holds together the catalytic and membrane sectors of the enzyme. A second crystal form that was solved at 2.9 A resolution supports the flexible nature of subunit C. These structures provide a framework for exploring the unique mechanistic features of V-ATPases.

A structural model of the vacuolar ATPase from transmission electron microscopy

Vacuolar ATPases (V-ATPases) are large, membrane bound, multisubunit protein complexes which function as ATP hydrolysis driven proton pumps. V-ATPases and related enzymes are found in the endomembrane system of eukaryotic organsims, the plasma membrane of specialized cells in higher eukaryotes, and the plasma membrane of prokaryotes. The proton pumping action of the vacuolar ATPase is involved in a variety of vital intra- and inter-cellular processes such as receptor mediated endocytosis, protein trafficking, active transport of metabolites, homeostasis and neurotransmitter release. This review summarizes recent progress in the structure determination of the vacuolar ATPase focusing on studies by transmission electron microscopy. A model of the subunit architecture of the vacuolar ATPase is presented which is based on the electron microscopic images and the available information from genetic, biochemical and biophysical experiments.

Mutational analysis of the stator subunit E of the yeast V-ATPase

Subunit E is a component of the peripheral stalk(s) that couples membrane and peripheral subunits of the V-ATPase complex. In order to elucidate the function of subunit E, site-directed mutations were performed at the amino terminus and carboxyl terminus. Except for S78A and D233A/T202A, which exhibited V(1)V(o) assembly defects, the function of subunit E was resistant to mutations. Most mutations complemented the growth phenotype of vma4Delta mutants, including T6A and D233A, which only had 25% of the wild-type ATPase activity. Residues Ser-78 and Thr-202 were essential for V(1)V(o) assembly and function. The mutation S78A destabilized subunit E and prevented assembly of V(1) subunits at the membranes. Mutant T202A membranes exhibited 2-fold increased V(max) and about 2-fold less of V(1)V(o) assembly; the mutation increased the specific activity of V(1)V(o) by enhancing the k(cat) of the enzyme 4-fold. Reduced levels of V(1)V(o) and V(o) complexes at T202A membranes suggest that the balance between V(1)V(o) and V(o) was not perturbed; instead, cells adjusted the amount of assembled V-ATPase complexes in order to compensate for the enhanced activity. These results indicated communication between subunit E and the catalytic sites at the A(3)B(3) hexamer and suggest potential regulatory roles for the carboxyl end of subunit E. At the carboxyl end, alanine substitution of Asp-233 significantly reduced ATP hydrolysis, although the truncation 229-233Delta and the point mutation K230A did not affect assembly and activity. The implication of these results for the topology and functions of subunit E within the V-ATPase complex are discussed.

Rotary molecular motors

The F-, V-, and A-adenosine triphosphatases (ATPases) represent a family of evolutionarily related ion pumps found in every living cell. They either function to synthesize adenosine triphosphate (ATP) at the expense of an ion gradient or they act as primary ion pumps establishing transmembrane ion motive force at the expense of ATP hydrolysis. The A-, F-, and V-ATPases are rotary motor enzymes. Synthesis or hydrolysis of ATP taking place in the three catalytic sites of the membrane extrinsic domain is coupled to ion translocation across the single ion channel in the membrane-bound domain via rotation of a central part of the complex with respect to a static portion of the enzyme. This chapter reviews recent progress in the structure determination of several members of the family of F-, A-, and V-ATPases and our current understanding of the rotary mechanism of energy coupling.

Electron-microscopic structure of the V-ATPase from mung bean

The vacuolar H(+)-ATPase from mung bean (Vigna radiata L. cv. Wilczek) was purified to homogeneity. The purified complex contained all the reported subunits from mung bean, but also included a 40-kDa subunit, corresponding to the membrane-associated subunit d, which has not previously been observed. The structure of the V-ATPase from mung bean was studied by electron microscopy of negatively stained samples. An analysis of over 6,000 single-particle images obtained by electron microscopy of the purified complex revealed that the complex, similar to other V-ATPases, is organized into two major domains V1 and Vo with overall dimensions of 25 nm x 13.7 nm and a stalk region connecting the V1 and Vo domains. Several individual areas of protein density were observed in the stalk region, indicating its complexity. The projections clearly showed that the complex contained one central stalk and at least two peripheral stalks. Subcomplexes containing subunits A, B and E, dissociated from the tonoplast membrane by KI, were purified. The structure of the subcomplex was also studied by electron microscopy followed by single-molecule analysis of 13,000 projections. Our preliminary results reveal an area of high protein density at the bottom of the subcomplex immediately below the cavity formed by the A and B subunits, indicating the position of subunit E.

Three-Dimensional Structure of the Vacuolar ATPase

The structure of the proton-pumping vacuolar ATPase (V-ATPase) from bovine brain clathrin coated vesicles was analyzed by electron microscopy and single molecule image analysis. A three-dimensional structural model of the complex was calculated by the angular reconstitution method at a resolution of 27 A. Overall, the appearance of the V(0) and V(1) domains in the three-dimensional model of the intact bovine V-ATPase resembles the models of the isolated bovine V(0) and yeast V(1) domains determined previously. To determine the binding position of subunit H in the V-ATPase, electron microscopy and cysteine-mediated photochemical cross-linking were used. Difference maps calculated from projection images of intact bovine V-ATPase and a V-ATPase preparation in which the two H subunit isoforms were removed by treatment with cystine revealed less protein density at the bottom of the V(1) in the subunit H-depleted enzyme, suggesting that subunit H isoforms bind at the interface of the V(1) and V(0) domains. A comparison of three-dimensional models calculated for intact and subunit H-depleted enzyme indicated that at least one of the subunit H isoforms, although poorly resolved in the three-dimensional electron density, binds near the putative N-terminal domain of the a subunit of the V(0). For photochemical cross-linking, unique cysteine residues were introduced into the yeast V-ATPase B subunit at sites that were localized based on molecular modeling using the crystal structure of the mitochondrial F(1) domain. Cross-linking was performed using the photoactivatable sulfhydryl reagent 4-(N-maleimido)benzophenone. Cross-linking to subunit H was observed from two sites on subunit B (E494 and T501) predicted to be located on the outer surface of the subunit closest to the membrane. Results from both electron microscopy and cross-linking analysis thus place subunit H near the interface of the V(1) and V(0) domains and suggest a close structural similarity between the V-ATPases of yeast and mammals.

Structure and function of the vacuolar H+-ATPase: moving from low-resolution models to high-resolution structures

In the absence of a high-resolution structure for the vacuolar H+-ATPase, a number of approaches can yield valuable information about structure/function relationships in the enzyme. Electron microscopy can provide not only a representation of the overall architecture of the complex, but also a low-resolution map onto which structures solved for individually expressed subunits can be fitted. Here we review the possibilities for electron microscopy of the Saccharomyces V-ATPase and examine the suitability of V-ATPase subunits for expression in high yield prokaryotic systems, a key step towards high-resolution structural studies. We also review the role of experimentally-derived structural models in understanding structure/function relationships in the V-ATPase, with particular reference to the complex of proton-translocating 16 kDa proteolipids in the membrane domain of the V-ATPase. This model in turn makes testable predictions about the sites of binding of bafilomycins and the functional interactions between the proteolipid and the single-copy membrane subunit Vph1p, with implications for the constitution of the proton translocation pathway.

Subunit structure, function, and arrangement in the yeast and coated vesicle V-ATPases

The vacuolar (H+)-ATPases (or V-ATPases) are ATP-dependent proton pumps that function both to acidify intracellular compartments and to transport protons across the plasma membrane. Acidification of intracellular compartments is important for such processes as receptor-mediated endocytosis, intracellular trafficking, protein processing, and coupled transport. Plasma membrane V-ATPases function in renal acidification, bone resorption, pH homeostasis, and, possibly, tumor metastasis. This review will focus on work from our laboratories on the V-ATPases from mammalian clathrin-coated vesicles and from yeast. The V-ATPases are composed of two domains. The peripheral V1 domain has a molecular mass of 640 kDa and is composed of eight different subunits (subunits A-H) of molecular mass 70-13 kDa. The integral V0 domain, which has a molecular mass of 260 kDa, is composed of five different subunits (subunits a, d, c, c', and c'') of molecular mass 100-17 kDa. The V1 domain is responsible for ATP hydrolysis whereas the V0 domain is responsible for proton transport. Using a variety of techniques, including cysteine-mediated crosslinking and electron microscopy, we have defined both the overall shape of the V-ATPase and the V0 domain as well as the location of various subunits within the complex. We have employed site-directed and random mutagenesis to identify subunits and residues involved in nucleotide binding and hydrolysis, proton translocation, and the coupling of these two processes. We have also investigated the mechanism of regulation of the V-ATPase by reversible dissociation and the role of different subunits in this process.

Assembly and regulation of the yeast vacuolar H+-ATPase

The yeast vacuolar proton-translocating ATPase (V-ATPase) is an excellent model for V-ATPases in all eukaryotic cells. Activity of the yeast V-ATPase is reversibly down-regulated by disassembly of the peripheral (V1) sector, which contains the ATP-binding sites, from the membrane (V0) sector, which contains the proton pore. A similar regulatory mechanism has been found in Manduca sexta and is believed to operate in other eukaryotes. We are interested in the mechanism of reversible disassembly and its implications for V-ATPase structure. In this review, we focus on (1) characterization of the yeast V-ATPase stalk subunits, which form the interface between V1 and V0, (2) potential mechanisms of silencing ATP hydrolytic activity in disassembled V1 sectors, and (3) the structure and function of RAVE, a recently discovered complex that regulates V-ATPase assembly.

Subunit composition, structure, and distribution of bacterial V-type ATPases

The overall structure of V-ATPase complexes resembles that of F-type ATPases, but the stalk region is different and more complex. Database searches followed by sequence analysis of the five water-soluble stalk region subunits C-G revealed that (i) to date V-ATPases are found in 16 bacterial species, (ii) bacterial V-ATPases are closer to archaeal A-ATPases than to eukaryotic V-ATPases, and (iii) different groups of bacterial V-ATPases exist. Inconsistencies in the nomenclature of types and subunits are addressed. Attempts to assign subunit positions in V-ATPases based on biochemical experiments, chemical cross-linking, and electron microscopy are discussed. A structural model for prokaryotic and eukaryotic V-ATPases is proposed. The prokaryotic V-ATPase is considered to have a central stalk between headpiece and membrane flanked by two peripheral stalks. The eukaryotic V-ATPases have one additional peripheral stalk.

Yeast V1-ATPase: affinity purification and structural features by electron microscopy

V1-ATPase from the yeast Saccharomyces cerevisiae was purified via a FLAG affinity tag introduced into the N terminus of the G subunit. The preparation migrated as a single band in native gel electrophoresis and contained subunits ABCDEFGH (with subunit C present at substoichiometric amounts) as determined by matrix-assisted laser desorption ionization time-of-flight mass spectrometry. The initial specific Ca-ATPase activity was approximately 6 micromol/min/mg. The structure of the yeast V1-ATPase was studied by electron microscopy of negatively stained and frozen hydrated samples. A 25-A resolution three-dimensional model of the complex was calculated from two-dimensional projections by the angular reconstitution technique. The model shows six elongated densities arranged in pseudo-3-fold symmetry around a large central cavity. At the top of the molecule, various protrusions can be seen. At the bottom of the complex, two large masses are visible that are connected to the main body of the molecule. Comparison of the yeast V1 structure with the structure of the intact V1V0-ATPase from bovine brain clathrin-coated vesicles (Wilkens, S., Vasilyeva, E., and Forgac, M. (1999) J. Biol. Chem. 274, 31804-31810) indicates that the structure of the isolated V1 from yeast is very similar to the structure of the V1 domain in the intact V-ATPase complex.

Interacting helical surfaces of the transmembrane segments of subunits a and c' of the yeast V-ATPase defined by disulfide-mediated cross-linking

Proton translocation by the vacuolar (H+)-ATPase (or V-ATPase) has been shown by mutagenesis to be dependent upon charged residues present within transmembrane segments of subunit a as well as the three proteolipid subunits (c, c', and c"). Interaction between R735 in TM7 of subunit a and the glutamic acid residue in the middle of TM4 of subunits c and c' or TM2 of subunit c" has been proposed to be essential for proton release to the luminal compartment. In order to determine whether the helical face of TM7 of subunit a containing R735 is capable of interacting with the helical face of TM4 of subunit c' containing the essential glutamic acid residue (Glu-145), cysteine-mediated cross-linking between these subunits in yeast has been performed. Cys-less forms of subunits a and c' as well as forms containing unique cysteine residues were constructed, introduced together into a strain disrupted in both endogenous subunits, and tested for growth at neutral pH, for assembly competence and for cross-linking in the presence of cupric-phenanthroline by SDS-PAGE and Western blot analysis. Four different cysteine mutants of subunit a were each tested pairwise with ten different unique cysteine mutants of subunit c'. Strong cross-linking was observed for the pairs aS728C/c'I142C, aA731C/c'E145C, aA738C/c'F143C, aA738C/c'L147C, and aL739C/c'L147C. Partial cross-linking was observed for an additional 13 of 40 pairs analyzed. When arrayed on a helical wheel diagram, the results suggest that the helical face of TM7 of subunit a containing Arg-735 interacts with the helical face of TM4 of subunit c' centered on Val-146 and bounded by Glu-145 and Leu-147. The results are consistent with a possible rotational flexibility of one or both of these transmembrane segments as well as some flexibility of movement perpendicular to the membrane.

Proton translocation driven by ATP hydrolysis in V-ATPases

The vacuolar H(+)-ATPases (or V-ATPases) are a family of ATP-dependent proton pumps responsible for acidification of intracellular compartments and, in certain cases, proton transport across the plasma membrane of eukaryotic cells. They are multisubunit complexes composed of a peripheral domain (V(1)) responsible for ATP hydrolysis and an integral domain (V(0)) responsible for proton translocation. Based upon their structural similarity to the F(1)F(0) ATP synthases, the V-ATPases are thought to operate by a rotary mechanism in which ATP hydrolysis in V(1) drives rotation of a ring of proteolipid subunits in V(0). This review is focused on the current structural knowledge of the V-ATPases as it relates to the mechanism of ATP-driven proton translocation.

Isolation of a complete A1AO ATP synthase comprising nine subunits from the hyperthermophile Methanococcus jannaschii

Archaeal A(1)A(O) ATP synthase/ATPase operons are highly conserved among species and comprise at least nine genes encoding structural proteins. However, all A(1)A(O) ATPase preparations reported to date contained only three to six subunits and, therefore, the study of this unique class of secondary energy converters is still in its infancy. To improve the quality of A(1)A(O) ATPase preparations, we chose the hyperthermophilic, methanogenic archaeon Methanococcus jannaschii as a model organism. Individual subunits of the A(1)A(O) ATPase from M. jannaschii were produced in E. coli, purified, and antibodies were raised. The antibodies enabled the development of a protocol ensuring purification of the entire nine-subunit A(1)A(O) ATPase. The ATPase was solubilized from membranes of M. jannaschii by Triton X-100 and purified to apparent homogeneity by sucrose density gradient centrifugation, ion exchange chromatography, and gel filtration. Electron micrographs revealed the A(1) and A(O) domains and the central stalk, but also additional masses which could represent a second stalk. Inhibitor studies were used to demonstrate that the A(1) and A(O) domains are functionally coupled. This is the first description of an A(1)A(O) ATPase preparation in which the two domains (A(1) and A(O)) are fully conserved and functionally coupled.

The amino-terminal domain of the E subunit of vacuolar H(+)-ATPase (V-ATPase) interacts with the H subunit and is required for V-ATPase function

Vacuolar H(+)-ATPases (V-ATPases) are highly conserved proton pumps that couple hydrolysis of cytosolic ATP to proton transport out of the cytosol. Although it is generally believed that V-ATPases transport protons by a rotary catalytic mechanism analogous to that used by F(1)F(0)-ATPases, the structure and subunit composition of the central or peripheral stalk of the multisubunit complex are not well understood. We searched for proteins that bind to the E subunit of V-ATPase using the yeast two-hybrid assay and identified the H subunit as an interacting partner. Physical association between the E and H subunits of V-ATPase was confirmed in vitro by precipitation assays. Deletion mapping analysis revealed that a 78-amino acid fragment at the amino terminus of the E subunit was sufficient for binding to the H subunit. Expression of the amino-terminal fragments of the E subunits from human and yeast as dominant-negative mutants resulted in dramatic decreases in bafilomycin A(1)-sensitive ATP hydrolysis and proton transport activities of V-ATPase. Our data demonstrate the physiological significance of the interaction between the E and H subunits of V-ATPase and extend previous studies on the arrangement of subunits on the peripheral stalk of V-ATPase.

Phenotypic subunit composition of the tobacco (Nicotiana tabacum L.) vacuolar-type H(+)-translocating ATPase

The model plant tobacco (Nicotiana tabacum L.) was chosen for a survey of the subunit composition of the V-ATPase at the protein level. V-ATPase was purified from tobacco leaf cell tonoplasts by solubilization with the nonionic detergent Triton X-100 and immunoprecipitation. In the purified fraction 12 proteins were present. By matrix-assisted laser-desorption ionization mass spectrometry (MALDI-MS) and amino acid sequencing 11 of these polypeptides could be identified as subunits A, B, C, D, F, G, c, d and three different isoforms of subunit E. The polypeptide which could not be identified by MALDI analysis might represent subunit H. The data presented here, for the first time, enable an unequivocal identification of V-ATPase subunits after gel electrophoresis and open the possibility to assign changes in polypeptide composition to variations in respective V-ATPase subunits occurring as a response to environmental conditions or during plant development.

Three-dimensional map of a plant V-ATPase based on electron microscopy

V-ATPases pump protons into the interior of various subcellular compartments at the expense of ATP. Previous studies have shown that these pumps comprise a membrane-integrated, proton-translocating (V(0)), and a soluble catalytic (V(1)) subcomplex connected to one another by a thin stalk region. We present two three-dimensional maps derived from electron microscopic images of the complete V-ATPase complex from the plant Kalanchoë daigremontiana at a resolution of 2.2 nm. In the presence of a non-hydrolyzable ATP analogue, the details of the stalk region between V(0) and V(1) were revealed for the first time in their three-dimensional organization. A central stalk was surrounded by three peripheral stalks of different sizes and shapes. In the absence of the ATP analogue, the tilt of V(0) changed with respect to V(1), and the stalk region was less clearly defined, perhaps due to increased flexibility and partial detachment of some of the peripheral stalks. These structural changes corresponded to decreased stability of the complex and might be the initial step in a controlled disassembly.

Mutational analysis of the subunit C (Vma5p) of the yeast vacuolar H+-ATPase

Subunit C is a V(1) sector subunit found in all vacuolar H(+)-ATPases (V-ATPases) that may be part of the peripheral stalk connecting the peripheral V(1) sector with the membrane-bound V(0) sector of the enzyme (Wilkens, S., Vasilyeva, E., and Forgac, M. (1999) J. Biol. Chem. 274, 31804--31810). To elucidate subunit C function, we performed random and site-directed mutagenesis of the yeast VMA5 gene. Site-directed mutations in the most highly conserved region of Vma5p, residues 305--325, decreased catalytic activity of the V-ATPase by up to 48% without affecting assembly. A truncation mutant (K360stop) identified by random mutagenesis suggested a small region near the C terminus of the protein (amino acids 382--388) might be important for subunit stability. Site-directed mutagenesis revealed that three aromatic amino acids in this region (Tyr-382, Phe-385, and Tyr-388) in addition to four other conserved aromatic amino acids (Phe-260, Tyr-262, Phe-296, Phe-300) are essential for stable assembly of V(1) with V(0), although alanine substitutions at these positions support some activity in vivo. Surprisingly, three mutations (F260A, Y262A, and F385A) greatly decrease the stability of the V-ATPase in vitro but increase its k(cat) for ATP hydrolysis and proton transport by at least 3-fold. The peripheral stalk of V-ATPases must balance the stability essential for productive catalysis with the dynamic instability involved in regulation; these three mutations may perturb that balance.

Cysteine-directed cross-linking to subunit B suggests that subunit E forms part of the peripheral stalk of the vacuolar H+-ATPase

We have employed a combination of site-directed mutagenesis and covalent cross-linking to identify subunits in close proximity to subunit B in the vacuolar H(+)-ATPase (V-ATPase) complex. Unique cysteine residues were introduced into a Cys-less form of subunit B, and the V-ATPase complex in isolated vacuolar membranes from each mutant strain was reacted with the bifunctional, photoactivable maleimide reagent 4-(N-maleimido)benzophenone. Photoactivation resulted in cross-linking of the unique sulfhydryl groups on subunit B with other subunits in the complex. Four of the eight mutants constructed containing a unique cysteine residue at Ala(15), Lys(45), Glu(494), or Thr(501) resulted in the formation of cross-linked products, which were recognized by Western blot analysis using antibodies against both subunits B and E. These products had a molecular mass of 84 kDa, consistent with a cross-linked product of subunits B and E. Molecular modeling of subunit B places Ala(15) and Lys(45) near the top of the V(1) structure (i.e. farthest from the membrane), whereas Glu(494) and Thr(501) are predicted to reside near the bottom of V(1), with all four residues predicted to be oriented toward the external surface of the complex. A model incorporating these and previous data is presented in which subunit E exists in an extended conformation on the outer surface of the A(3)B(3) hexamer that forms the core of the V(1) domain. This location for subunit E suggests that this subunit forms part of the peripheral stalk of the V-ATPase that links the V(1) and V(0) domains.

The vacuolar (H+)-ATPases--nature's most versatile proton pumps

The pH of intracellular compartments in eukaryotic cells is a carefully controlled parameter that affects many cellular processes, including intracellular membrane transport, prohormone processing and transport of neurotransmitters, as well as the entry of many viruses into cells. The transporters responsible for controlling this crucial parameter in many intracellular compartments are the vacuolar (H+)-ATPases (V-ATPases). Recent advances in our understanding of the structure and regulation of the V-ATPases, together with the mapping of human genetic defects to genes that encode V-ATPase subunits, have led to tremendous excitement in this field.

Expression and localization of the mouse homologue of the yeast V-ATPase 21-kDa Subunit c" (Vma16p)

We have identified a cDNA encoding the mouse homologue of the yeast V-ATPase 21-kDa subunit c" (Vma16p). The encoded protein contains 205 amino acid residues with five putative membrane spanning segments and shows 48% identity and 64% similarity to the yeast protein. Despite this homology, however, the mouse cDNA does not complement the phenotype of a yeast strain in which the VMA16 gene has been disrupted. Northern blot analysis demonstrated that the 21-kDa subunit is expressed in most tissues examined and showed an expression pattern almost identical to that of the 16-kDa proteolipid subunit (subunit c). The presence of multiple mRNA species suggests the existence of alternatively spliced forms of the 21-kDa subunit which, from Southern blot analysis, are derived from a single gene. Promoter analysis using the luciferase reporter gene revealed that a region 186 bases upstream of the initiation site is sufficient to show a low level of transcriptional activity but that transcription is significantly enhanced by inclusion of the region -186 to -706. The 21-kDa protein was Myc-tagged and the 16-kDa protein was HA-tagged and the tagged proteins were co-expressed in COS-1 cells in order to study their intracellular localization by immunofluorescence microscopy. Both proteins showed significant punctate and perinuclear staining and were predominantly co-localized throughout the cell, consistent with their presence in the same V(0) complexes. Selective permeabilization of cells with digitonin (to permeabilize the plasma membrane) or Triton X-100 (to permeabilize both intracellular and plasma membranes) followed by immunofluorescence microscopy revealed that the carboxyl terminus of the 21-kDa subunit is exposed on the cytoplasmic side of the membrane whereas the carboxyl terminus of the 16-kDa subunit is located on the lumenal side of the membrane.

ATP analogue binding to the A subunit induces conformational changes in the E subunit that involves a disulfide bond formation in plant V-ATPase

Vacuolar H+-ATPase (V-ATPase) consists of a catalytic head, a stalk part and a membrane domain. We indirectly investigated the interaction between the A subunit (catalytic head) and the E subunit (stalk part) using an ATP analogue, adenosine 5'-[beta,gamma-imino]triphosphate (AMP-PNP), which holds the enzyme in the substrate-binding state. AMP-PNP treatment caused a mobility shift of the E subunit with a faster migration in SDS/polyacrylamide gel electrophoresis without a reductant, while ATP treatment did not. A mobility shift of the E subunit has been detected in several plants. As polypeptides with intramolecular disulfide bonds migrate faster than those without disulfide bonds, the mobility shift may be due to the formation of an intramolecular disulfide bond by two cysteine residues conserved among several plant species. The mobility shift may be involved in the binding of AMP-PNP to the ATP-binding site, which exists in the A and B subunits, as it was inhibited by the addition of ATP. Pretreatment with 2'-3'-O-(4-benzoylbenzoyl)-ATP (Bz-ATP), which modifies the ATP-binding site of the B subunit under UV illumination, did not inhibit the mobility shift of the E subunit caused by AMP-PNP treatment. The response of V-ATPase following the AMP-PNP binding may cause a conformational change in the E subunit into a form that is susceptible to oxidation of cysteine residues. This is the first demonstration of interaction between the A and E subunits in the substrate-binding state of a plant V-ATPase.

Catalytic properties of Na(+)-translocating V-ATPase in Enterococcus hirae

V-ATPases make up a family of proton pumps distributed widely from bacteria to higher organisms. We found a variant of this family, a Na(+)-translocating ATPase, in a Gram-positive bacterium, Enterococcus hirae. The Na(+)-ATPase was encoded by nine ntp genes from F to D in an ntp operon (ntpFIKECGABDHJ): the ntpJ gene encoded a K(+) transporter independent of the Na(+)-ATPase. Expression of this operon, encoding two transport systems for Na(+) and K(+) ions, was regulated at the transcriptional level by intracellular Na(+) as the signal. Structural aspects and catalytic properties of purified Na(+)-ATPase closely resembled those of other V-type H(+)-ATPases. Interestingly, the E. hirae enzyme showed a very high affinity for Na(+) at catalytic reaction. This property enabled the measurement of ion binding to this ATPase for the first time in the study of V- and F-ATPases. Properties of Na(+) binding to V-ATPase were consistent with the model that V-ATPase proteolipids form a rotor ring consisting of hexamers, each having one cation binding site. We propose here a structure model of Na(+) binding sites of the enzyme.

Mutational analysis of subunit G (Vma10p) of the yeast vacuolar H+-ATPase

The G subunit of V-ATPases is a soluble subunit that shows homology with the b subunit of F-ATPases and may be part of the "stator" stalk connecting the peripheral V(1) and membrane V(0) sectors. When the N-terminal half of the G subunit is modeled as an alpha helix, most of the conserved residues fall on one face of the helix (Hunt, I. E., and Bowman, B. J. (1997) J. Bioenerg. Biomembr. 29, 533-540). We probed the function of this region by site-directed mutagenesis of the yeast VMA10 gene. Stable G subunits were produced in the presence of Y46A and K55A mutations, but subunit E was destabilized, resulting in loss of the V-ATPase assembly. Mutations E14A and K50A allowed wild-type growth and assembly of V-ATPase complexes, but the complexes formed were unstable. Mutations R25A and R25L stabilized V-ATPase complexes relative to wild-type and partially inhibited disassembly of V(1) from V(0) in response to glucose deprivation even though the mutant enzymes were fully active. A 2-amino acid deletion in the middle of the predicted N-terminal helix (DeltaQ29D30) allowed assembly of a functional V-ATPase. The results indicate that, although the N-terminal half of the G subunit is essential for V-ATPase activity, either this region is not a rigid helix or the presence of a continuous, conserved face of the helix is not essential.

Insights into the rotary catalytic mechanism of F0F1 ATP synthase from the cross-linking of subunits b and c in the Escherichia coli enzyme

The transmembrane sector of the F(0)F(1) rotary ATP synthase is proposed to organize with an oligomeric ring of c subunits, which function as a rotor, interacting with two b subunits at the periphery of the ring, the b subunits functioning as a stator. In this study, cysteines were introduced into the C-terminal region of subunit c and the N-terminal region of subunit b. Cys of N2C subunit b was cross-linked with Cys at positions 74, 75, and 78 of subunit c. In each case, a maximum of 50% of the b subunit could be cross-linked to subunit c, which suggests that either only one of the two b subunits lie adjacent to the c-ring or that both b subunits interact with a single subunit c. The results support a topological arrangement of these subunits, in which the respective N- and C-terminal ends of subunits b and c extend to the periplasmic surface of the membrane and cAsp-61 lies at the center of the membrane. The cross-linking of Cys between bN2C and cV78C was shown to inhibit ATP-driven proton pumping, as would be predicted from a rotary model for ATP synthase function, but unexpectedly, cross-linking did not lead to inhibition of ATPase activity. ATP hydrolysis and proton pumping are therefore uncoupled in the cross-linked enzyme. The c subunit lying adjacent to subunit b was shown to be mobile and to exchange with c subunits that initially occupied non-neighboring positions. The movement or exchange of subunits at the position adjacent to subunit b was blocked by dicyclohexylcarbodiimide. These experiments provide a biochemical verification that the oligomeric c-ring can move with respect to the b-stator and provide further support for a rotary catalytic mechanism in the ATP synthase.

Molecular characterization of the yeast vacuolar H+-ATPase proton pore

The Saccharomyces cerevisiae vacuolar ATPase (V-ATPase) is composed of at least 13 polypeptides organized into two distinct domains, V(1) and V(0), that are structurally and mechanistically similar to the F(1)-F(0) domains of the F-type ATP synthases. The peripheral V(1) domain is responsible for ATP hydrolysis and is coupled to the mechanism of proton translocation. The integral V(0) domain is responsible for the translocation of protons across the membrane and is composed of five different polypeptides. Unlike the F(0) domain of the F-type ATP synthase, which contains 12 copies of a single 8-kDa proteolipid, the V-ATPase V(0) domain contains three proteolipid species, Vma3p, Vma11p, and Vma16p, with each proteolipid contributing to the mechanism of proton translocation (Hirata, R., Graham, L. A., Takatsuki, A., Stevens, T. H., and Anraku, Y. (1997) J. Biol. Chem. 272, 4795-4803). Experiments with hemagglutinin- and c-Myc epitope-tagged copies of the proteolipids revealed that each V(0) complex contains all three species of proteolipid with only one copy each of Vma11p and Vma16p but multiple copies of Vma3p. Since the proteolipids of the V(0) complex are predicted to possess four membrane-spanning alpha-helices, twice as many as a single F-ATPase proteolipid subunit, only six V-ATPase proteolipids would be required to form a hexameric ring-like structure similar to the F(0) domain. Therefore, each V(0) complex will likely be composed of four copies of the Vma3p proteolipid in addition to Vma11p and Vma16p. Structural differences within the membrane-spanning domains of both V(0) and F(0) may account for the unique properties of the ATP-hydrolyzing V-ATPase compared with the ATP-generating F-type ATP synthase.

F1F0-ATP synthase-stalking mind and imagination

Electron microscopy together with image analysis has been used to study the structure of the intact F1F0-ATPsynthase from Escherichia coli. A procedure has been developed which allows preparation of detergent-free enzyme. Aside from the well known two-domain structure, images of F1F0 prepared by this procedure show a number of additional features, including a second stalk, which can be seen extending all the way from the F0 to the top of the F1 in some images, and a small protein on the very top of the F1, which has been identified as the delta subunit by decoration with a monoclonal antibody. In light of these results, a refined model of the subunit arrangement of the complex is presented.

Subunit D (Vma8p) of the yeast vacuolar H+-ATPase plays a role in coupling of proton transport and ATP hydrolysis

To investigate the function of subunit D in the vacuolar H(+)-ATPase (V-ATPase) complex, random and site-directed mutagenesis was performed on the VMA8 gene encoding subunit D in yeast. Mutants were selected for the inability to grow at pH 7.5 but the ability to grow at pH 5.5. Mutations leading to reduced levels of subunit D in whole cell lysates were excluded from the analysis. Seven mutants were isolated that resulted in pH-dependent growth but that contained nearly wild-type levels of subunit D and nearly normal assembly of the V-ATPase as assayed by subunit A levels associated with isolated vacuoles. Each of these mutants contained 2-3 amino acid substitutions and resulted in loss of 60-100% of proton transport and 58-93% of concanamycin-sensitive ATPase activity. To identify the mutations responsible for the observed effects on activity, 14 single amino acid substitutions and 3 double amino acid substitutions were constructed by site-directed mutagenesis and analyzed as described above. Six of the single mutations and all three of the double mutations led to significant (>30%) loss of activity, with the mutations having the greatest effects on activity clustering in the regions Val(71)-Gly(80) and Lys(209)-Met(221). In addition, both M221V and the double mutant V71D/E220V led to significant uncoupling of proton transport and ATPase activity, whereas the double mutant G80D/K209E actually showed increased coupling efficiency. Both a mutant showing reduced coupling and a mutant with only 6% of wild-type proton transport activity showed normal dissociation of the V-ATPase complex in vivo in response to glucose deprivation. These results suggest that subunit D plays an important role in coupling of proton transport and ATP hydrolysis and that only low rates of turnover of the enzyme are required to support in vivo dissociation.

Properties of three isoforms of the 116-kDa subunit of vacuolar H+-ATPase from a single vertebrate species. Cloning, gene expression and protein characterization of functionally distinct isoforms in Gallus gallus

Vacuolar H+-ATPases (V-ATPases) are involved in a wide variety of essential cellular processes. An unresolved question is how the cell regulates the activity of these proton pumps and their targeting to distinct cellular compartments. There is growing evidence for the presence of subunit diversity amongst V-pumps, particularly regarding the 116-kDa subunit (called the a subunit). We have cloned and characterized three isoforms (a1, a2 and a3) of this subunit from chicken. The amino-acid sequences of these homologues are approximately 50% similar and their nucleotide differences indicate that they are products of distinct genes. The levels of mRNA expression of these isoforms was quantified by ribonuclease protection analysis. The a1 and a2 isoforms have a similar tissue distribution, with the highest level of mRNA expression in brain, an intermediate level in kidney and relatively low levels in liver and bone. In contrast, the highest level of expression of the a3 isoform is in bone and liver, with a moderate level in kidney, and the lowest level in brain. An antibody against the a1 isoform reacted with a 116 kDa protein in a brain V-ATPase preparation that was not detected in bone or liver V-ATPase preparations, whereas an antibody against the a3 isoform reacted with a 116-kDa peptide in bone and liver, but not brain V-ATPases preparations. The bone and brain V-ATPases showed differential sensitivity to the inhibitors bafilomycin and (2Z,4E)-5-(5,6-dichloro-2-indolyl)-2-methoxy-N-[4-(2, 2,6,6-tetramethyl)piperidinyl]-2,4-pentadienamide. Thus, this work demonstrates the presence of structurally and functionally distinct V-ATPases in a single vertebrate species.

The mechanochemistry of V-ATPase proton pumps

The vacuolar H(+)-ATPases (V-ATPases) are a universal class of proton pumps that are structurally similar to the F-ATPases. Both protein families are characterized by a membrane-bound segment (V(o), F(o)) responsible for the translocation of protons, and a soluble portion, (V(1), F(1)), which supplies the energy for translocation by hydrolyzing ATP. Here we present a mechanochemical model for the functioning of the V(o) ion pump that is consistent with the known structural features and biochemistry. The model reproduces a variety of experimental measurements of performance and provides a unified view of the many mechanisms of intracellular pH regulation.

Evidence that the NH2 terminus of vph1p, an integral subunit of the V0 sector of the yeast V-ATPase, interacts directly with the Vma1p and Vma13p subunits of the V1 sector

The vacuolar-type H(+)-ATPase (V-ATPase) is composed of a peripherally bound (V(1)) and a membrane-associated (V(0)) complex. V(1) ATP hydrolysis is thought to rotate a central stalk, which in turn, is hypothesized to drive V(0) proton translocation. Transduction of torque exerted by the rotating stalk on V(0) requires a fixed structural link (stator) between the complexes to prevent energy loss through futile rotation of V(1) relative to V(0); this work sought to identify stator components. The 95-kDa V-ATPase subunit, Vph1p, has a cytosolic NH(2) terminus (Nt-Vph1p) and a membrane-associated COOH terminus. Two-hybrid assays demonstrated that Nt-Vph1p interacts with the catalytic V(1) subunit, Vma1p. Co-immunoprecipitation of Vma1p with Nt-Vph1p confirmed the interaction. Expression of Nt-Vph1p in a Deltavph1 mutant was necessary to recruit Vma13p to V(1). Vma13p bound to Nt-Vph1p in vitro demonstrating direct interaction. Limited trypsin digests cleaves both Nt-Vph1p and Vma13p. The same tryptic treatment results in a loss of proton translocation while not reducing bafilomycin A(1)-sensitive ATP hydrolysis. Trypsin cleaved Vph1p at arginine 53. Elimination of the tryptic cleavage site by substitution of arginine 53 to serine partially protected vacuolar acidification from trypsin digestion. These results suggest that Vph1p may function as a component of a fixed structural link, or stator, coupling V(1) ATP hydrolysis to V(0) proton translocation.

Structure, function and regulation of the plant vacuolar H(+)-translocating ATPase

The plant V-ATPase is a primary-active proton pump present at various components of the endomembrane system. It is assembled by different protein subunits which are located in two major domains, the membrane-integral V(o)-domain and the membrane peripheral V(1)-domain. At the plant vacuole the V-ATPase is responsible for energization of transport of ions and metabolites, and thus the V-ATPase is important as a 'house-keeping' and as a stress response enzyme. It has been shown that transcript and protein amount of the V-ATPase are regulated depending on metabolic conditions indicating that the expression of V-ATPase subunit is highly regulated. Moreover, there is increasing evidence that modulation of the holoenzyme structure might influence V-ATPase activity.

A rotary molecular motor that can work at near 100% efficiency

A single molecule of F1-ATPase is by itself a rotary motor in which a central gamma-subunit rotates against a surrounding cylinder made of alpha3beta3-subunits. Driven by the three betas that sequentially hydrolyse ATP, the motor rotates in discrete 120 degree steps, as demonstrated in video images of the movement of an actin filament bound, as a marker, to the central gamma-subunit. Over a broad range of load (hydrodynamic friction against the rotating actin filament) and speed, the F1 motor produces a constant torque of ca. 40 pN nm. The work done in a 120 degree step, or the work per ATP molecule, is thus ca. 80 pN nm. In cells, the free energy of ATP hydrolysis is ca. 90 pN nm per ATP molecule, suggesting that the F1 motor can work at near 100% efficiency. We confirmed in vitro that F1 indeed does ca. 80 pN nm of work under the condition where the free energy per ATP is 90 pN nm. The high efficiency may be related to the fully reversible nature of the F1 motor: the ATP synthase, of which F1 is a part, is considered to synthesize ATP from ADP and phosphate by reverse rotation of the F1 motor. Possible mechanisms of F1 rotation are discussed.

Regulation of V-ATPases by reversible disassembly

V-ATPases consist of a complex of peripheral subunits containing catalytic sites for ATP hydrolysis, the V(1) sector, attached to several membrane subunits containing a proton pore, the V(0) sector. ATP-driven proton transport requires structural and functional coupling of the two sectors, but in vivo, the interaction between the V(1) and V(0) sectors is dynamic and is regulated by extracellular conditions. Dynamic instability appears to be a general characteristic of V-ATPases and, in yeast cells, the assembly state of V-ATPases is governed by glucose availability. The structural and functional implications of reversible disassembly of V-ATPases are discussed.

Tissue specificity of E subunit isoforms of plant vacuolar H(+)-ATPase and existence of isotype enzymes

Immunoblot analyses and partial amino acid sequencings revealed that both the 40- (E1) and 37-kDa (E2) subunits of V-ATPase in the pea epicotyl were E subunit isoforms. Similarly, both the 35- (D1) and 29-kDa (D2) subunits were D subunit isoforms, although the similarity of the amino acid sequences is still unknown. In immunoblot analyses, two or three E subunit isoforms with molecular masses ranging from 29 to 40 kDa were detected in other plants. Two isotypes of V-ATPase from the pea epicotyl were separated by ion exchange chromatography and had subunit compositions differing only in the ratio of E1 and E2. There was a difference in the V(max) and K(m) of ATP hydrolysis between the two isotypes. E1 was scarcely detected in crude membrane fractions from the leaf and cotyledon, while E2 was detected in fractions from all of the tissues examined. The compositions of D subunit isoforms in the leaf and epicotyl were different, and the vacuolar membrane in the leaf did not contain D2. The efficiency of H(+) pumping activity in the vacuolar membrane of the leaf was higher than that of the epicotyl. The results suggest that the presence of the isoforms of D and E subunits is characteristic to plants and that the isoforms are closely related to the enzymatic properties.