Membrane insertion, glycosylation, and oligomerization of inositol trisphosphate receptors in a cell-free translation system

Missense mutations in inositol 1,4,5-trisphosphate receptor type 3 result in leaky Ca2+ channels and activation of store-operated Ca2+ entry

Mutations in all subtypes of the inositol 1,4,5-trisphosphate receptor Ca2+ release channel are associated with human diseases. In this report, we investigated the functionality of three neuropathy-associated missense mutations in IP3R3 (V615M, T1424M, and R2524C). The mutants only exhibited function when highly over-expressed compared to endogenous hIP3R3. All variants resulted in elevated basal cytosolic Ca2+ levels, decreased endoplasmic reticulum Ca2+ store content, and constitutive store-operated Ca2+ entry in the absence of any stimuli, consistent with a leaky IP3R channel pore. These variants differed in channel function; when stably over-expressed the R2524C mutant was essentially dead, V615M was poorly functional, and T1424M exhibited activity greater than that of the corresponding wild-type following threshold stimulation. These results demonstrate that a common feature of these mutations is decreased IP3R3 function. In addition, these mutations exhibit a novel phenotype manifested as a constitutively open channel, which inappropriately gates SOCE in the absence of stimulation.

Disease-associated mutations in inositol 1,4,5-trisphosphate receptor subunits impair channel function

The inositol 1,4,5-trisphosphate (IP3) receptors (IP3Rs), which form tetrameric channels, play pivotal roles in regulating the spatiotemporal patterns of intracellular calcium signals. Mutations in IP3Rs have been increasingly associated with many debilitating human diseases such as ataxia, Gillespie syndrome, and generalized anhidrosis. However, how these mutations affect IP3R function, and how the perturbation of as-sociated calcium signals contribute to the pathogenesis and severity of these diseases remains largely uncharacterized. Moreover, many of these diseases occur as the result of autosomal dominant inheritance, suggesting that WT and mutant subunits associate in heterotetrameric channels. How the in-corporation of different numbers of mutant subunits within the tetrameric channels affects its activities and results in different disease phenotypes is also unclear. In this report, we investigated representative disease-associated missense mutations to determine their effects on IP3R channel activity. Additionally, we designed concatenated IP3R constructs to create tetrameric channels with a predefined subunit composition to explore the functionality of heteromeric channels. Using calcium imaging techniques to assess IP3R channel function, we observed that all the mutations studied resulted in severely attenuated Ca2+ release when expressed as homotetramers. However, some heterotetramers retained varied degrees of function dependent on the composition of the tetramer. Our findings suggest that the effect of mutations depends on the location of the mutation in the IP3R structure, as well as on the stoichiometry of mutant subunits assembled within the tetrameric channel. These studies provide insight into the pathogenesis and penetrance of these devastating human diseases.

Cell-free biology using remote-controlled digital microfluidics for individual droplet control

Cell-free biology for diverse protein expression and biodetection in vitro has developed rapidly in recent years because of its more open and controllable reaction environment. However, complex liquid handling schemes are troublesome, especially when scaling up to perform multiple different reactions simultaneously. Digital microfluidic (DMF) technology can operate a single droplet by controlling its movement, mixing, separation, and some other actions, and is a suitable scaffold for cell-free reactions with higher efficiency. In this paper, a commercial DMF board, OpenDrop, was used, and DMF technology via remote real-time control inspired by the Internet of Things (IoT) was developed for detecting glucose enzyme catalytic cell-free reactions and verifying the feasibility of programmed cell-free protein expression. A cell-free biological reaction process which can be remote-controlled visually with excellent interactivity, controllability and flexibility was achieved. As proof-of-concept research, this work proposed a new control interface for single-drop cell-free biological reactions. It is much like the “droplet operation desktop” concept, used for remote-controllable operations and distributions of cell-free biology for efficient biological screening and protein synthesis in complex reaction networks, with expanded operability and less artificial interference.

Cell-free biology using remote-controlled digital microfluidics for programmed biological screening and synthesis.

The Making and Breaking of Inositol 1,4,5-Trisphosphate Receptor Tetramers

Mammalian cells express three highly conserved inositol 1,4,5-trisphosphate (IP₃) receptor types (IP₃R1, IP₃R2 and IP₃R3), which have broadly similar characteristics, but markedly different distributions, and form homo- or heterotetrameric Ca²⁺ channels in endoplasmic reticulum (ER) membranes. A vast array of published work details how mature, ER membrane-located IP₃ receptor tetramers are regulated, but much less attention has been paid to the intriguing questions of how the tetramers are assembled and destroyed as part of their natural life cycle. Are they assembled at the ER membrane from nascent, or completely translated polypeptides? How are they disassembled and degraded? These questions and other recently defined modes of IP₃ receptor processing will be briefly reviewed.

Cardiac inositol 1,4,5-trisphosphate receptors

Calcium is a second messenger that regulates almost all cellular functions. In cardiomyocytes, calcium plays an integral role in many functions including muscle contraction, gene expression, and cell death. Inositol 1,4,5-trisphosphate receptors (IP₃Rs) are a family of calcium channels that are ubiquitously expressed in all tissues. In the heart, IP₃Rs have been associated with regulation of cardiomyocyte function in response to a variety of neurohormonal agonists, including those implicated in cardiac disease. Notably, IP₃R activity is thought to be essential for mediating the hypertrophic response to multiple stimuli including endothelin-1 and angiotensin II. In this review, we will explore the functional implications of IP₃R activity in the heart in health and disease.

Probes for manipulating and monitoring IP3

Inositol 1,4,5-trisphosphate (IP₃) is an important second messenger produced via G-protein-coupled receptor- or receptor tyrosine kinase-mediated pathways. IP₃ levels induce Ca²⁺ release from the endoplasmic reticulum (ER) via IP₃ receptor (IP₃R) located in the ER membrane. The resultant spatiotemporal pattern of Ca²⁺ signals regulates diverse cellular functions, including fertilization, gene expression, synaptic plasticity, and cell death. Therefore, monitoring and manipulating IP₃ levels is important to elucidate not only the functions of IP₃-mediated pathways but also the encoding mechanism of IP₃R as a converter of intracellular signals from IP₃ to Ca²⁺.

Unique Regulatory Properties of Heterotetrameric Inositol 1,4,5-Trisphosphate Receptors Revealed by Studying Concatenated Receptor Constructs

The ability of inositol 1,4,5-trisphosphate receptors (IP3R) to precisely initiate and generate a diverse variety of intracellular Ca(2+) signals is in part mediated by the differential regulation of the three subtypes (R1, R2, and R3) by key functional modulators (IP3, Ca(2+), and ATP). However, the contribution of IP3R heterotetramerization to Ca(2+) signal diversity has largely been unexplored. In this report, we provide the first definitive biochemical evidence of endogenous heterotetramer formation. Additionally, we examine the contribution of individual subtypes within defined concatenated heterotetramers to the shaping of Ca(2+) signals. Under conditions where key regulators of IP3R function are optimal for Ca(2+) release, we demonstrate that individual monomers within heteromeric IP3Rs contributed equally toward generating a distinct 'blended' sensitivity to IP3 that is likely dictated by the unique IP3 binding affinity of the heteromers. However, under suboptimal conditions where [ATP] were varied, we found that one subtype dictated the ATP regulatory properties of heteromers. We show that R2 monomers within a heterotetramer were both necessary and sufficient to dictate the ATP regulatory properties. Finally, the ATP-binding site B in R2 critical for ATP regulation was mutated and rendered non-functional to address questions relating to the stoichiometry of IP3R regulation. Two intact R2 monomers were sufficient to maintain ATP regulation in R2 homotetramers. In summary, we demonstrate that heterotetrameric IP3R do not necessarily behave as the sum of the constituent subunits, and these properties likely extend the versatility of IP3-induced Ca(2+) signaling in cells expressing multiple IP3R isoforms.

Using concatenated subunits to investigate the functional consequences of heterotetrameric inositol 1,4,5-trisphosphate receptors

Inositol 1,4,5-trisphosphate receptors (IP3Rs) are a family of ubiquitous, ER localized, tetrameric Ca2+ release channels. There are three subtypes of the IP3Rs (R1, R2, R3), encoded by three distinct genes, that share ∼60-70% sequence identity. The diversity of Ca2+ signals generated by IP3Rs is thought to be largely the result of differential tissue expression, intracellular localization and subtype-specific regulation of the three subtypes by various cellular factors, most significantly InsP3, Ca2+ and ATP. However, largely unexplored is the notion of additional signal diversity arising from the assembly of both homo and heterotetrameric InsP3Rs. In the present article, we review the biochemical and functional evidence supporting the existence of homo and heterotetrameric populations of InsP3Rs. In addition, we consider a strategy that utilizes genetically concatenated InsP3Rs to study the functional characteristics of heterotetramers with unequivocally defined composition. This approach reveals that the overall properties of IP3R are not necessarily simply a blend of the constituent monomers but that specific subtypes appear to dominate the overall characteristics of the tetramer. It is envisioned that the ability to generate tetramers with defined wild type and mutant subunits will be useful in probing fundamental questions relating to IP3R structure and function.

Tracing the Evolutionary History of Inositol, 1, 4, 5-Trisphosphate Receptor: Insights from Analyses of Capsaspora owczarzaki Ca2+ Release Channel Orthologs

Cellular Ca(2+) homeostasis is tightly regulated and is pivotal to life. Inositol 1,4,5-trisphosphate receptors (IP3Rs) and ryanodine receptors (RyRs) are the major ion channels that regulate Ca(2+) release from intracellular stores. Although these channels have been extensively investigated in multicellular organisms, an appreciation of their evolution and the biology of orthologs in unicellular organisms is largely lacking. Extensive phylogenetic analyses reveal that the IP3R gene superfamily is ancient and diverged into two subfamilies, IP3R-A and IP3R-B/RyR, at the dawn of Opisthokonta. IP3R-B/RyR further diversified into IP3R-B and RyR at the stem of Filozoa. Subsequent evolution and speciation of Holozoa is associated with duplication of IP3R-A and RyR genes, and loss of IP3R-B in the vertebrate lineages. To gain insight into the properties of IP3R important for the challenges of multicellularity, the IP3R-A and IP3R-B family orthologs were cloned from Capsaspora owczarzaki, a close unicellular relative to Metazoa (designated as CO.IP3R-A and CO.IP3R-B). Both proteins were targeted to the endoplasmic reticulum. However, CO.IP3R-A, but strikingly not CO.IP3R-B, bound IP3, exhibited robust Ca(2+) release activity and associated with mammalian IP3Rs. These data indicate strongly that CO.IP3R-A as an exemplar of ancestral IP3R-A orthologs forms bona fide IP3-gated channels. Notably, however, CO.IP3R-A appears not to be regulated by Ca(2+), ATP or Protein kinase A-phosphorylation. Collectively, our findings explore the origin, conservation, and diversification of IP3R gene families and provide insight into the functionality of ancestral IP3Rs and the added specialization of these proteins in Metazoa.

N-terminus oligomerization is conserved in intracellular calcium release channels

Oligomerization of all three mammalian ryanodine receptor isoforms, a structural requirement for normal intracellular Ca²⁺ release channel function, is displayed by the discrete N-terminal domain which assembles into homo- and hetero-tetramers. This is demonstrated in yeast, mammalian cells and native tissue by complementary yeast two-hybrid, chemical cross-linking and co-immunoprecipitation assays. The IP₃ (inositol 1,4,5-trisphosphate) receptor N-terminus (residues 1–667) similarly exhibits tetrameric association as indicated by chemical cross-linking and co-immunoprecipitation assays. The presence of either a 15-residue splice insertion or of the cognate ligand IP₃ did not affect tetramerization of the IP₃ receptor N-terminus. Thus N-terminus tetramerization appears to be an essential intrinsic property that is conserved in both the ryanodine receptor and IP₃ receptor families of mammalian intracellular Ca²⁺ release channels.

Intracellular Ca²⁺ channels are of paramount importance for numerous cellular processes. In the present paper we report on a novel N-terminus intersubunit interaction, an essential structure–function parameter, which is conserved in both families of intracellular Ca²⁺ channels.

Caspase 3 cleavage of the inositol 1,4,5-trisphosphate receptor does not contribute to apoptotic calcium release

An important role in the regulation of apoptotic calcium release is played by the ubiquitously expressed family of inositol 1,4,5-trisphosphate receptor (IP(3)R) channels. One model for IP(3)R activation during apoptosis is cleavage by the apoptotic protease caspase 3. Here we show that early elevations in cytosolic calcium during apoptosis do not require caspase 3 activity. We detected a robust increase in calcium levels in response to staurosporine treatment in primary human fibroblasts and HeLa cells in the presence of the caspase inhibitor Z-VAD, indicating that calcium release during the initiation of apoptosis occurs independently of caspase 3. Similar results were obtained with MCF-7 cells which lack caspase 3 expression. Stable expression of caspase 3 in MCF-7 cells and TAT-based transduction of the active recombinant caspase 3 directly into living MCF-7 cells had marginal effects on the early events leading to cytosolic calcium elevations and irreversible commitment to apoptotic cell death. Significantly, blocking IP(3) binding to the IP(3)R with an IP(3) sponge resulted in suppression of staurosporine-induced calcium release and cell death. Collectively, our results suggest that generation of IP(3) is sufficient for the initiation of apoptotic calcium signaling, and caspase 3-mediated truncation of IP(3)R channel is a consequence, not causative, of apoptotic calcium release.

PSAQ™ standards for accurate MS-based quantification of proteins: from the concept to biomedical applications

Absolute protein quantification, i.e. determining protein concentrations in biological samples, is essential to our understanding of biological and physiopathological phenomena. Protein quantification methods based on the use of antibodies are very effective and widely used. However, over the last ten years, absolute protein quantification by mass spectrometry has attracted considerable interest, particularly for the study of systems biology and as part of biomarker development. This interest is mainly linked to the high multiplexing capacity of MS analysis, and to the availability of stable-isotope-labelled standards for quantification. This article describes the details of how to produce, control the quality and use a specific type of standard: Protein Standard Absolute Quantification (PSAQ™) standards. These standards are whole isotopically labelled proteins, analogues of the proteins to be assayed. PSAQ standards can be added early during sample treatment, thus they can correct for protein losses during sample prefractionation and for incomplete sample digestion. Because of this, quantification of target proteins is very accurate and precise using these standards. To illustrate the advantages of the PSAQ method, and to contribute to the increase in its use, selected applications in the biomedical field are detailed here.

Co-translational association of cell-free expressed membrane proteins with supplied lipid bilayers

Routine strategies for the cell-free production of membrane proteins in the presence of detergent micelles and for their efficient co-translational solubilization have been developed. Alternatively, the expression in the presence of rationally designed lipid bilayers becomes interesting in particular for biochemical studies. The synthesized membrane proteins would be directed into a more native-like environment and cell-free expression of transporters, channels or other membrane proteins in the presence of supplied artificial membranes could allow their subsequent functional analysis without any exposure to detergents. In addition, lipid-dependent effects on activity and stability of membrane proteins could systematically be studied. However, in contrast to the generally efficient detergent solubilization, the successful stabilization of membrane proteins with artificial membranes appears to be more difficult. A number of strategies have therefore been explored in order to optimize the co-translational association of membrane proteins with different forms of supplied lipid bilayers including liposomes, bicelles, microsomes or nanodiscs. In this review, we have compiled the current state-of-the-art of this technology and we summarize parameters which have been indicated as important for the co-translational association of cell-free synthesized membrane proteins with supplied membranes.

Uncoupled IP3 receptor can function as a Ca2+-leak channel: cell biological and pathological consequences

Ca(2+) release via intracellular release channels, IP(3)Rs (inositol 1,4,5-trisphosphate receptors) and RyRs (ryanodine receptors), is perhaps the most ubiquitous and versatile cellular signalling mechanism, and is involved in a vast number of cellular processes. In addition to this classical release pathway there is limited, but yet persistent, information about less well-defined Ca(2+)-leak pathways that may play an important role in the control of the Ca(2+) load of the endo(sarco)plasmic reticulum. The mechanisms responsible for this 'basal' leak are not known, but recent data suggest that both IP(3)Rs and RyRs may also operate as Ca(2+)-leak channels, particularly in pathological conditions. Proteolytic cleavage or biochemical modification (such as hyperphosphorylation or nitrosylation), for example, occurring during conditions of cell stress or apoptosis, can functionally uncouple the cytoplasmic control domains from the channel domain of the receptor. Highly significant information has been obtained from studies of malfunctioning channels in various disorders; for example, RyRs in cardiac malfunction or genetic muscle diseases and IP(3)Rs in neurodegenerative diseases. In this review we aim to summarize the existing information about functionally uncoupled IP(3)R and RyR channels, and to discuss the concept that those channels can participate in Ca(2+)-leak pathways.

Linking structure to function: Recent lessons from inositol 1,4,5-trisphosphate receptor mutagenesis

Great insight has been gained into the structure and function of the inositol 1,4,5 trisphosphate receptor (InsP(3)R) by studies employing mutagenesis of the cDNA encoding the receptor. Notably, early studies using this approach defined the key constituents required for InsP(3) binding in the N-terminus and the membrane spanning regions in the C-terminal domain responsible for channel formation, targeting and function. In this article we evaluate recent studies which have used a similar approach to investigate key residues underlying the in vivo modulation by select regulatory factors. In addition, we review studies defining the structural requirements in the channel domain which comprise the conduction pathway and are suggested to be involved in the gating of the channel.

Targeting of inositol 1,4,5-trisphosphate receptor to the endoplasmic reticulum by its first transmembrane domain

Targeting of IP₃R (inositol 1,4,5-trisphosphate receptors) to membranes of the ER (endoplasmic reticulum) and their retention within ER or trafficking to other membranes underlies their ability to generate spatially organized Ca²⁺ signals. N-terminal fragments of IP₃R1 (type 1 IP₃R) were tagged with enhanced green fluorescent protein, expressed in COS-7 cells and their distribution was determined by confocal microscopy and subcellular fractionation. Localization of IP₃R1 in the ER requires translation of between 26 and 34 residues beyond the end of the first transmembrane domain (TMD1), a region that includes TMD2 (second transmembrane domain). Replacement of these post-TMD1 residues with unrelated sequences of similar length (24–36 residues) partially mimicked the native residues. We conclude that for IP₃R approx. 30 residues after TMD1 must be translated to allow a signal sequence within TMD1 to be extruded from the ribosome and mediate co-translational targeting to the ER. Hydrophobic residues within TMD1 and TMD2 then ensure stable association with the ER membrane.

Targeting and clustering of IP3 receptors: key determinants of spatially organized Ca2+ signals

Inositol 1,4,5-trisphosphate receptors (IP3R) are intracellular Ca2+ channels that are almost ubiquitously expressed in animal cells. The spatiotemporal complexity of the Ca2+ signals evoked by IP3R underlies their versatility in cellular signaling. Here we review the mechanisms that contribute to the subcellular targeting of IP3R and the dynamic interplay between IP3R that underpin their ability to generate complex intracellular Ca2+ signals.

Surface accessibility and conformational changes in the N-terminal domain of type I inositol trisphosphate receptors: studies using cysteine substitution mutagenesis

To identify surface-accessible residues and monitor conformational changes of the type I inositol 1,4,5-trisphosphate receptor protein in membranes, we have introduced 10 cysteine substitutions into the N-terminal ligand-binding domain. The reactivity of these mutants with progressively larger maleimide-polyethylene glycol derivatives (MPEG) was measured using a gel shift assay of tryptic fragments. The results indicate that the mutations fall into four categories as follows: sites that are highly accessible based on reactivity with the largest 20-kDa MPEG (S2C); sites that are moderately accessible based on reactivity only with 5-kDa MPEG (S6C, S7C, A189C, and S277C); sites whose accessibility is markedly enhanced by Ca(2+) (S171C, S277C, and A575C); and sites that are inaccessible irrespective of incubation conditions (S217C, A245C, and S436C). The stimulation of accessibility induced by Ca(2+) at the S277C site occurred with an EC(50) of 0.8 mum and was mimicked by Sr(2+) but not Ba(2+). Inositol 1,4,5-trisphosphate alone did not affect reactivity of any of the mutants in the presence or absence of Ca(2+). The data are interpreted using crystal structures and EM reconstructions of the receptor. Our data identify N-terminal regions of the protein that become exposed upon Ca(2+) binding and suggest possible orientations of the suppressor and ligand-binding domains that have implications for the mechanism of gating of the channel.

High yield cell-free production of integral membrane proteins without refolding or detergents

Integral membrane proteins act as critical cellular components and are important drug targets. However, difficulties in producing membrane proteins have hampered investigations of structure and function. In vivo production systems are often limited by cell toxicity, and previous in vitro approaches have required unnatural folding pathways using detergents or lipid solutions. To overcome these limitations, we present an improved cell-free expression system which produces high yields of integral membrane proteins without the use of detergents or refolding steps. Our cell-free reaction activates an Escherichia coli-derived cell extract for transcription and translation. Purified E. coli inner membrane vesicles supply membrane-bound components and the lipid environment required for insertion and folding. Using this system, we demonstrated successful synthesis of two complex integral membrane transporters, the tetracycline pump (TetA) and mannitol permease (MtlA), in yields of 570+/-50 microg/mL and 130+/-30 microg/mL of vesicle-associated protein, respectively. These yields are up to 400 times typical in vivo concentrations. Insertion and folding of these proteins are verified by sucrose flotation, protease digestion, and activity assays. Whereas TetA incorporates efficiently into vesicle membranes with over two-thirds of the synthesized protein being inserted, MtlA yields appear to be limited by insufficient concentrations of a membrane-associated chaperone.

Cloning and expression of the HIV protein in Escherichia coli cell-free system

Sixteen kinds of human immunodeficiency virus (HIV) target genes were cloned by polymerase chain reaction (PCR) amplification, and specific plasmids were constructed as the templates for the expression of these genes in the cell-free system. Similarly, the linear PCR templates of these genes for cell-free protein expression were also constructed by using two PCR amplification process. These different templates can be employed to biosynthesize HIV proteins in the cell-free system simultaneously and can be adapted for some high-throughput processes. HIV protease (P10) was performed as a target protein, and two different templates (plasmid and PCR product) were prepared and used for P10 expression in the Escherichia coli cell-free system. The target protein P10 was detected in sodium dodecyl sulfate-polyacrylamide gel electrophoresis gels either by using a plasmid template or by a PCR template. These results are promising and helpful to develop a high throughput process for drug discovery.

Role of inositol 1,4,5-trisphosphate receptors in apoptosis in DT40 lymphocytes

The role of inositol 1,4,5-trisphosphate receptors (IP(3)R) in caspase-3 activation and cell death was investigated in DT40 chicken B-lymphocytes stably expressing various IP(3)R constructs. Both full-length type-I IP(3)R and a truncated construct corresponding to the caspase-3 cleaved "channel-only" fragment were able to support staurosporine (STS)-induced caspase-3 activation and cell death even when the IP(3)R construct harbored a mutation that inactivates the pore of the Ca(2+) channel (D2550A). However, a full-length wild-type IP(3)R did not promote caspase-3 activation when the 159-amino acid cytosol-exposed C-terminal tail was deleted. STS caused an increase in cytosolic free Ca(2+) in DT40 cells expressing wild-type or pore-dead IP(3)R mutants. However, in the latter case all the Ca(2+) increase originated from Ca(2+) entry across the plasma membrane. Caspase-3 activation of pore-dead DT40 cells was also more sensitive to extracellular Ca(2+) chelation when compared with wild-type cells. STS-mediated release of cytochrome c into the cytosol and mitochondrial membrane potential depolarization could also be observed in DT40 cells lacking IP(3)Rs or containing the pore-dead mutant. We conclude that nonfunctional IP(3)Rs can sustain apoptosis in DT40 lymphocytes, because they facilitate Ca(2+) entry mechanisms across the plasma membrane. Although the intrinsic ion-channel function of IP(3)Rs is dispensable for apoptosis induced by STS, the C-terminal tail of IP(3)Rs appears to be essential, possibly reflecting key protein-protein interactions with this domain.

Inositol trisphosphate receptor Ca2+ release channels

The inositol 1,4,5-trisphosphate (InsP3) receptors (InsP3Rs) are a family of Ca2+ release channels localized predominately in the endoplasmic reticulum of all cell types. They function to release Ca2+ into the cytoplasm in response to InsP3 produced by diverse stimuli, generating complex local and global Ca2+ signals that regulate numerous cell physiological processes ranging from gene transcription to secretion to learning and memory. The InsP3R is a calcium-selective cation channel whose gating is regulated not only by InsP3, but by other ligands as well, in particular cytoplasmic Ca2+. Over the last decade, detailed quantitative studies of InsP3R channel function and its regulation by ligands and interacting proteins have provided new insights into a remarkable richness of channel regulation and of the structural aspects that underlie signal transduction and permeation. Here, we focus on these developments and review and synthesize the literature regarding the structure and single-channel properties of the InsP3R.

The Role of the S4-S5 Linker and C-terminal Tail in Inositol 1,4,5-Trisphosphate Receptor Function

In previous studies we have suggested that spatial proximity of the C- and N-terminal domains of inositol 1,4,5-trisphosphate receptors (IP(3)Rs) may be critical for the channel gating mechanism. In the present study we have examined the sites of C-N interaction in more detail. We report that deletion mutations within the S4-S5 linker (amino acids 2418-2437) prevent co-immunoprecipitation of the C- and N-terminal domains, inhibit channel activity and enhance IP(3) binding. We also show that a region of the C-terminal tail (amino acids 2694-2721), predicted to be a coiled-coil, is also required for channel activity. Circular dichroism spectroscopy and gel filtration studies confirm that this region has a helical structure with the ability to form tetramers. We propose a model in which IP(3)-induced conformational changes in the N-terminal domain are mechanically transmitted to the opening of the pore through an attachment to the S4-S5 linker. The coiled-coil domain in the C-terminal tail may play a critical role in maintaining the structural integrity of the channel.

ATP binding to a unique site in the type-1 S2- inositol 1,4,5-trisphosphate receptor defines susceptibility to phosphorylation by protein kinase A

The subtype- and splice variant-specific modulation of inositol 1,4,5-trisphosphate receptors (InsP3R) by interaction with cellular factors plays a fundamental role in defining the characteristics of Ca2+ release in individual cell types. In this study, we investigate the binding properties and functional consequences of the expression of a putative nucleotide binding fold (referred to as the ATPC site) unique to the S2- splice variant of the type-1 InsP3R (InsP3R-1), the predominant splice variant in peripheral tissue. A glutathione S-transferase fusion protein encompassing amino acids 1574-1765 of the S2- InsP3R-1 and including the glycine-rich motif Gly-Tyr-Gly-Glu-Lys-Gly bound ATP specifically as measured by fluorescent trinitrophenyl-ATP binding. This binding was completely abrogated by a point mutation (G1690A) in the nucleotide binding fold. The functional sensitivity of S2- InsP3R-1 constructs was evaluated in DT40-3KO-M3 cells, a null background for InsP3R, engineered to express muscarinic M3 receptors. The S2- InsP3R-1 containing the G1690A mutation was markedly less sensitive to agonist stimulation than wild type S2- InsP3R-1 or receptors containing a similar (Gly --> Ala) mutation in the established nucleotide binding sites in InsP3R-1 (the ATPA and ATPB sites). The ATP sensitivity of InsP3-induced Ca2+ release, however, was not altered by the G1690A mutation when measured in permeabilized DT40-3KO cells, suggesting a unique role for the ATPC site. Ca2+ release was dramatically potentiated following activation of cAMP-dependent protein kinase in DT40-3KO cells transiently expressing wild type S2- InsP3R or Gly --> Ala mutations in the ATPA and ATPB sites, but phosphorylation of the receptor and the potentiation of Ca2+ release were absent in cells expressing the G1690A mutation in S2- InsP3R. These data indicate that ATP binding specifically to the ATPC site in S2- InsP3R-1 controls the susceptibility of the receptor to protein kinase A-mediated phosphorylation, contributes to the functional sensitivity of the S2- InsP3R-1 and ultimately the sensitivity of cells to agonist stimulation.

The inositol 1,4,5-trisphosphate receptors

The inositol (1,4,5)-trisphosphate receptors (InsP3R) are the intracellular calcium (Ca2+) release channels that play a key role in Ca2+ signaling in cells. Three InsP3R isoforms-InsP3R type 1 (InsP3R1), InsP3R type 2 (InsP3R2), and InsP3R type 3 (InsP3R3) are expressed in mammals. A single InsP3R isoform is expressed in Drosophila melanogaster (DmInsP3R) and Caenorhabditis elegans (CeInsP3R). The progress made during last decade towards understanding the function and the properties of the InsP3R is briefly reviewed in this chapter. The main emphasis is on studies that revealed structural determinants responsible for the ligand recognition by the InsP3R, ion permeability of the InsP3R, modulation of the InsP3R by cytosolic Ca2+, ATP and PKA phosphorylation and on the recently identified InsP3R-binding partners. The main focus is on the InsP3R1, but the recent information about properties of other InsP3R isoforms is also discussed.

Pharmacological modulation of sarcoplasmic reticulum function in smooth muscle

The sarco/endoplasmic reticulum (SR/ER) is the primary storage and release site of intracellular calcium (Ca2+) in many excitable cells. The SR is a tubular network, which in smooth muscle (SM) cells distributes close to cellular periphery (superficial SR) and in deeper aspects of the cell (deep SR). Recent attention has focused on the regulation of cell function by the superficial SR, which can act as a buffer and also as a regulator of membrane channels and transporters. Ca2+ is released from the SR via two types of ionic channels [ryanodine- and inositol 1,4,5-trisphosphate-gated], whereas accumulation from thecytoplasm occurs exclusively by an energy-dependent sarco-endoplasmic reticulum Ca2+-ATPase pump (SERCA). Within the SR, Ca2+ is bound to various storage proteins. Emerging evidence also suggests that the perinuclear portion of the SR may play an important role in nuclear transcription. In this review, we detail the pharmacology of agents that alter the functions of Ca2+ release channels and of SERCA. We describe their use and selectivity and indicate the concentrations used in investigating various SM preparations. Important aspects of cell regulation and excitation-contractile activity coupling in SM have been uncovered through the use of such activators and inhibitors of processes that determine SR function. Likewise, they were instrumental in the recent finding of an interaction of the SR with other cellular organelles such as mitochondria. Thus, an appreciation of the pharmacology and selectivity of agents that interfere with SR function in SM has greatly assisted in unveiling the multifaceted nature of the SR.

Structural insights into the regulatory mechanism of IP3 receptor

Inositol 1,4,5-trisphosphate receptors (IP(3)R) are intracellular Ca(2+) release channels whose opening requires binding of two intracellular messengers IP(3) and Ca(2+). The regulation of IP(3)R function has also been shown to involve a variety of cellular proteins. Recent biochemical and structural analyses have deepened our understanding of how the IP(3)-operated Ca(2+) channel functions. Specifically, the atomic resolution structure of the IP(3)-binding region has provided a sound structural basis for the receptor interaction with the natural ligand. Electron microscopic studies have also shed light on the overall shape of the tetrameric receptor. This review aims to provide comprehensive overview of the current information available on the structure and function relationship of IP(3)R.

Functional Consequences of Phosphomimetic Mutations at Key cAMP-dependent Protein Kinase Phosphorylation Sites in the Type 1 Inositol 1,4,5-Trisphosphate Receptor

Regulation of Ca(2+) release through inositol 1,4,5-trisphosphate receptors (InsP(3)R) has important consequences for defining the particular spatio-temporal properties of intracellular Ca(2+) signals. In this study, regulation of Ca(2+) release by phosphorylation of type 1 InsP(3)R (InsP(3)R-1) was investigated by constructing "phosphomimetic" charge mutations in the functionally important phosphorylation sites of both the S2+ and S2- InsP(3)R-1 splice variants. Ca(2+) release was investigated following expression in Dt-40 3ko cells devoid of endogenous InsP(3)R. In cells expressing either the S1755E S2+ or S1589E/S1755E S2- InsP(3)R-1, InsP(3)-induced Ca(2+) release was markedly enhanced compared with nonphosphorylatable S2+ S1755A and S2- S1589A/S1755A mutants. Ca(2+) release through the S2- S1589E/S1755E InsP(3)R-1 was enhanced approximately 8-fold over wild type and approximately 50-fold when compared with the nonphosphorylatable S2- S1589A/S1755A mutant. In cells expressing S2- InsP(3)R-1 with single mutations in either S1589E or S1755E, the sensitivity of Ca(2+) release was enhanced approximately 3-fold; sensitivity was midway between the wild type and the double glutamate mutation. Paradoxically, forskolin treatment of cells expressing either single Ser/Glu mutation failed to further enhance Ca(2+) release. The sensitivity of Ca(2+) release in cells expressing S2+ S1755E InsP(3)R-1 was comparable with the sensitivity of S2- S1589E/S1755E InsP(3)R-1. In contrast, mutation of S2+ S1589E InsP(3)R-1 resulted in a receptor with comparable sensitivity to wild type cells. Expression of S2- S1589E/S1755E InsP(3)R-1 resulted in robust Ca(2+) oscillations when cells were stimulated with concentrations of alpha-IgM antibody that were threshold for stimulation in S2- wild type InsP(3)R-1-expressing cells. However, at higher concentrations of alpha-IgM antibody, Ca(2+) oscillations of a similar period and magnitude were initiated in cells expressing either wild type or S2- phosphomimetic mutations. Thus, regulation by phosphorylation of the functional sensitivity of InsP(3)R-1 appears to define the threshold at which oscillations are initiated but not the frequency or amplitude of the signal when established.

IP(3) receptors: the search for structure

Inositol (1,4,5)-trisphosphate receptors (IP(3)R) are intracellular Ca(2+) channels that are regulated by Ca(2+) and IP(3), and are modulated by many additional signals. They thereby allow both receptors that stimulate IP(3) formation and Ca(2+) to control release of Ca(2+) from intracellular stores. IP(3)Rs share many features with their close relatives, ryanodine receptors; each provides insight into the structure and function of the other. The structural basis of IP(3)R behaviour is beginning to emerge from intermediate-resolution structures of the complete IP(3)R, a 2.2-A structure of the IP(3)-binding core and comparisons with the pore structures of other tetrameric cation channels. The binding of IP(3) to a site towards the N-terminal of each IP(3)R subunit promotes binding of Ca(2+). This destabilizes an inhibitory interaction between N-terminal residues and a C-terminal 'gatekeeper' sequence, enabling the pore to open.

Targeting of Inositol 1,4,5-Trisphosphate Receptors to the Endoplasmic Reticulum by Multiple Signals within Their Transmembrane Domains

Most inositol 1,4,5-trisphosphate receptors (IP3R) are expressed in the endoplasmic reticulum (ER), where their precise distribution underlies the spatially complex Ca2+ signals evoked by extracellular stimuli. The signals that target IP3R to the ER or, less commonly, to other membranes are unknown. We expressed yellow fluorescent protein-tagged fragments of type 1 IP3R alone or fused with a plasma membrane protein to establish the determinants of ER targeting in COS-7 cells. By using a combination of confocal imaging and glycoprotein analyses, we demonstrated that any pair of the six transmembrane domains (TMD) linked by a luminal loop retains the protein within the ER, and when attached to a plasma membrane protein (ICAM-1), prevents it from reaching the medial Golgi. TMD1 or TMD2 alone were accumulated in mitochondria, whereas TMD5 and TMD6 were retained in ER, but were unable to prevent ICAM from reaching the plasma membrane. We conclude that IP3R are targeted to the ER membrane only after synthesis of TMDs 1 and 2, and that after co-translational insertion of the remaining TMDs, redundant retention signals present in any pair of TMD retain IP3R in the ER.

Three-dimensional Rearrangements within Inositol 1,4,5-Trisphosphate Receptor by Calcium

Allosteric binding of calcium ion (Ca2+) to inositol 1,4,5-trisphosphate (IP3) receptor (IP3R) controls channel gating within IP3R. Here, we present biochemical and electron microscopic evidence of Ca2+-sensitive structural changes in the three-dimensional structure of type 1 IP3R (IP3R1). Low concentrations of Ca2+ and high concentrations of Sr2+ and Ba2+ were shown to be effective for the limited proteolysis of IP3R1, but Mg2+ had no effect on the proteolysis. The electron microscopy and the limited proteolysis consistently demonstrated that the effective concentration of Ca2+ for conformational changes in IP3R1 was <10(-7) m and that the IP3 scarcely affected the conformational states. The structure of IP3R1 without Ca2+, as reconstructed by three-dimensional electron microscopy, had a "mushroom-like" appearance consisting of a large square-shaped head and a small channel domain linked by four thin bridges. The projection image of the "head-to-head" assembly comprising two particles confirmed the mushroom-like side view. The "windmill-like" form of IP3R1 with Ca2+ also contains the four bridges connecting from the IP3-binding domain toward the channel domain. These data suggest that the Ca2+-specific conformational change structurally regulates the IP3-triggered channel opening within IP3R1.

Proteolysis of type I inositol 1,4,5-trisphosphate receptor in WB rat liver cells

A comparison of the basal degradation of type I Ins P3Rs [L- myo -inositol 1,4,5-trisphosphate receptor], measured by pulse-chase analysis or by analysis of immunoreactive Ins P3Rs after cycloheximide addition, indicated that the small pool of newly synthesized radioactive Ins P3Rs degraded relatively rapidly compared with the large pool of mature Ins P3Rs. An antibody (Ab) against a peptide sequence within the IL-3 (third intraluminal loop) of the receptor (IL-3 Ab) was used to identify protected proteolytic fragments that may accumulate in cells. The IL-3 Ab recognized a 56 kDa fragment in both WB rat liver cells and A7R5 smooth-muscle cells. Gel filtration experiments indicated that the 56 kDa fragment was monomeric and, based on reactivity to other Abs, was missing the cytosol-exposed N- and C-terminal segments of the receptor. The addition of the lysosomal protease inhibitor chloroquine resulted in the rapid disappearance of the 56 kDa band. This effect was mimicked by the cysteine protease inhibitors leupeptin, N -acetyl-L-leucyl-L-leucyl-L-methioninal and N -acetyl-leucyl-leucyl-norleucinal. Lactacystin and NH4Cl were less effective. A second fragment of 16 kDa containing the C-terminus accumulated only when the cells were treated with NH4Cl, and not with any of the other inhibitors tested. No N-terminal-reactive fragments were observed. We propose that mature Ins P3R tetramers dissociate into monomers and that the 56 kDa fragment is a cleavage intermediate of the monomer representing the six transmembrane domains. Angiotensin-II-stimulated down-regulation of Ins P3Rs in WB cells has been shown to involve the ubiquitin/proteasome pathway. Angiotensin-II treatment of WB cells neither resulted in the accumulation of any new fragments nor increased the levels of the 56 or 16 kDa fragments. We conclude that basal and agonist-stimulated degradations of Ins P3Rs occur by different pathways. The agonist-mediated pathway involves the concerted removal and proteolysis of the entire receptor molecule from the endoplasmic reticulum membrane without the appearance of intermediate intraluminal fragments.

Structure of the type 1 inositol 1,4,5-trisphosphate receptor revealed by electron cryomicroscopy

The three-dimensional structure of the type 1 inositol 1,4,5-trisphosphate receptor (InsP3R1) has been determined by electron cryomicroscopy and single-particle reconstruction. The receptor was immunoaffinity-purified and formed functional InsP3- and heparin-sensitive channels with a unitary conductance similar to native InsP3Rs. The channel structure exhibits the expected 4-fold symmetry and comprises two morphologically distinct regions: a large pinwheel and a smaller square. The pinwheel region has four radial curved spokes interconnected by a central core. The InsP3-binding core domain has been localized within each spoke of the pinwheel region by fitting its x-ray structure into our reconstruction. A structural mapping of the amino acid sequences to several functional domains is deduced within the structure of the InsP3R1 tetramer.

Critical regions for activation gating of the inositol 1,4,5-trisphosphate receptor

To understand the molecular mechanism of ligand-induced gating of the inositol 1,4,5-trisphosphate (IP(3)) receptor (IP(3)R)/Ca(2+) release channel, we analyzed the channel properties of deletion mutants retaining both the IP(3)-binding and channel-forming domains of IP(3)R1. Using intrinsically IP(3)R-deficient cells as the host cells for receptor expression, we determined that six of the mutants, those lacking residues 1-223, 651-1130, 1267-2110, 1845-2042, 1845-2216, and 2610-2748, did not exhibit any measurable Ca(2+) release activity, whereas the mutants lacking residues 1131-1379 and 2736-2749 retained the activity. Limited trypsin digestion showed that not only the IP(3)-gated Ca(2+)-permeable mutants lacking residues 1131-1379 and 2736-2749, but also two nonfunctional mutants lacking residues 1-223 and 651-1130, retained the normal folding structure of at least the C-terminal channel-forming domain. These results indicate that two regions of IP(3)R1, viz. residues 1-223 and 651-1130, are critical for IP(3)-induced gating. We also identified a highly conserved cysteine residue at position 2613, which is located within the C-terminal tail, as being essential for channel opening. Based on these results, we propose a novel five-domain structure model in which both N-terminal and internal coupling domains transduce ligand-binding signals to the C-terminal tail, which acts as a gatekeeper that triggers opening of the activation gate of IP(3)R1 following IP(3) binding.

Domain organization of the type 1 inositol 1,4,5-trisphosphate receptor as revealed by single-particle analysis

The inositol 1,4,5-trisphosphate receptor (IP(3)R) is a tetrameric intracellular Ca(2+) channel, which mediates the release of Ca(2+) from the endoplasmic reticulum in response to many different extracellular stimuli. We present a 3D structure of the type 1 IP(3)R obtained by electron microscopy and single-particle analysis that reveals its domain organization. The IP(3)R has a flower-like appearance with fourfold symmetry and is made up of three distinct domains connected by slender links. By relating the organization of the structural domains to secondary-structure predictions and biochemical data we develop a model in which structural domains are mapped onto the amino acid sequence to deduce the location of the channel region and the cytoplasmic inositol 1,4,5-trisphosphate-binding and modulatory subdomains. The structure of the IP(3)R is compared with that of other tetrameric cation channels. The channel domain is similar in size and shape to its counterparts in the ryanodine receptor and the Shaker voltage-gated K(+) channel.

Carboxyl-terminal sequences critical for inositol 1,4,5-trisphosphate receptor subunit assembly

The inositol 1,4,5-trisphosphate receptor (InsP(3)R) is a tetrameric assembly of conserved subunits that each contains six transmembrane regions (TMRs) localized near the carboxyl terminus. Receptor subunit assembly into a tetramer appears to be a multideterminant process involving an additive contribution of membrane spanning helices and the short cytosolic carboxyl terminus (residues 2590-2749). Previous studies have shown that of the six membrane-spanning regions in each subunit, the 5th and 6th transmembrane regions, and the carboxyl terminus are strong determinants for assembly. The fifth and sixth TMRs contain numerous beta-branched amino acids that may participate in coiled/coil formation via putative leucine zipper motifs. InsP(3)R truncation mutants were expressed in COS-1 cells and analyzed by sucrose density gradient sedimentation and gel filtration for their ability to assemble. Chemical cross-linking with the homobifunctional reagents sDST or DMS of mammalian and bacterially expressed carboxyl-terminal containing receptor fragments reveals that sequences within the carboxyl terminus confer the formation of subunit dimers. A series of InsP(3) receptor carboxyl-terminal fragments and glutathione S-transferase (GST)/InsP(3)R chimeras were expressed in Escherichia coli and used in an in vitro assay to elucidate the minimal sequence responsible for association of the carboxyl termini into dimers. The results presented here indicate that this minimal sequence is approximately 30 residues in length and is localized between residues 2629 and 2654. These residues are highly conserved between the three InsP(3)R isoforms ( approximately 80% identity) as well as the ryanodine receptor ( approximately 40% identity) and suggest that a conserved assembly motif may exist between the two intracellular receptor families. We propose that assembly of the InsP(3) receptor to a tetramer involves intersubunit interactions mediated through both the membrane-spanning regions and residues 2629-2654 of the carboxyl terminus possibly through the formation of a dimer of dimers.

Interactions of inositol 1,4,5-trisphosphate (IP(3)) receptors with synthetic poly(ethylene glycol)-linked dimers of IP(3) suggest close spacing of the IP(3)-binding sites

The distances between the inositol 1,4,5-trisphosphate (IP(3))-binding sites of tetrameric IP(3) receptors were probed using dimers of IP(3) linked by poly(ethylene glycol) (PEG) molecules of differing lengths (1-8 nm). Each of the dimers potently stimulated (45)Ca(2+) release from permeabilized cells expressing predominantly type 1 (SH-SY5Y cells) or type 2 (hepatocytes) IP(3) receptors. The shortest dimers, with PEG linkers of an effective length of 1.5 nm or less, were the most potent, being 3-4-fold more potent than IP(3). In radioligand binding experiments using cerebellar membranes, the shortest dimers bound with highest affinity, although the longest dimer (8 nm) also bound with almost 4-fold greater affinity than IP(3). The affinity of monomeric IP(3) with only the PEG attached was 2-fold weaker than IP(3), confirming that the increased affinity of the dimers requires the presence of both IP(3) motifs. The increased affinity of the long dimer probably results from the linked IP(3) molecules binding to sites on different receptors, because the dimer bound with greater affinity than IP(3) to cerebellar membranes, where receptors are densely packed, but with the same affinity as IP(3) to purified receptors. IP(3) and the IP(3) dimers, irrespective of their length, bound with similar affinity to a monomeric IP(3)-binding domain of the type 1 IP(3) receptor expressed in bacteria. Short dimers therefore bind with increased affinity only when the receptor is tetrameric. We conclude that the four IP(3)-binding sites of an IP(3) receptor may be separated by as little as 1.5 nm and are therefore likely to be placed centrally in this large (25 x 25 nm) structure, consistent with previous work indicating a close association between the central pore and the IP(3)-binding sites of the IP(3) receptor.

Rat inositol 1,4,5-trisphosphate receptor isoform 2 interacts with itself in its C-terminal portion and upstream of the first transmembrane domain

In response to stimulation at the plasma membrane, hepatocellular Ca(2+) signals are fast and precise and lead to rapid local changes in cytoplasmic free Ca(2+) concentration. These changes result from the opening of the inositol 1,4,5-trisphosphate receptor (InsP(3)R), which is a four-subunit intracellular InsP(3)-gated channel that releases Ca(2+) from the stores. To investigate the molecular mechanism underlying interactions between the InsP(3)R subunits, we cloned the predominant hepatocellular isoform, InsP(3)R isoform 2 (InsP(3)R2), and screened for interactions using the yeast two-hybrid assay. We found that the C-terminal domain of rat InsP(3)R2 interacts with itself, and that the cytoplasmic part preceding the first transmembrane domain, a region near a Ca(2+)-binding site, also interacts with itself. These interactions were confirmed by pull-down experiments. The C-terminal domain of InsP(3)R2 is also able to interact with the C-termini of rat InsP(3)R1 and InsP(3)R3. These results advance our understanding of the molecular mechanisms that underlie the oligomerization and interactions of the InsP(3)R subunits during the opening/closing of the Ca(2+) channel.

Molecular determinants of ion permeation and selectivity in inositol 1,4,5-trisphosphate receptor Ca2+ channels

We tested the hypothesis that key residues in a putative intraluminal loop contribute to determination of ion permeation through the intracellular Ca(2+) release channel (inositol 1,4,5-trisphosphate receptors (IP(3)Rs)) that is gated by the second messenger inositol 1,4,5-trisphosphate (IP(3)). To accomplish this, we mutated residues within the putative pore forming region of the channel and analyzed the functional properties of mutant channels using a (45)Ca(2+) flux assay and single channel electrophysiological analyses. Two IP(3)R mutations, V2548I and D2550E, retained the ability to release (45)Ca(2+) in response to IP(3). When analyzed at the single channel level; both recombinant channels had IP(3)-dependent open probabilities similar to those observed in wild-type channels. The mutation V2548I resulted in channels that exhibited a larger K(+) conductance (489 +/- 13 picosiemens (pS) for V2548I versus 364 +/- 5 pS for wild-type), but retained a Ca(2+) selectivity similar to wild-type channels (P(Ca(2+)):P(K(+)) approximately 4:1). Conversely, D2550E channels were nonselective for Ca(2+) over K(+) (P(Ca(2+)):P(K(+)) approximately 0.6:1), while the K(+) conductance was effectively unchanged (391 +/- 4 pS). These results suggest that amino acid residues Val(2548) and Asp(2550) contribute to the ion conduction pathway. We propose that the pore of IP(3)R channels has two distinct sites that control monovalent cation permeation (Val(2548)) and Ca(2+) selectivity (Asp(2550)).

Mapping of the ATP-binding sites on inositol 1,4,5-trisphosphate receptor type 1 and type 3 homotetramers by controlled proteolysis and photoaffinity labeling

Submillimolar ATP concentrations strongly enhance the inositol 1,4,5-trisphosphate (IP(3))-induced Ca(2+) release, by binding specifically to ATP-binding sites on the IP(3) receptor (IP(3)R). To locate those ATP-binding sites on IP(3)R1 and IP(3)R3, both proteins were expressed in Sf9 insect cells and covalently labeled with 8-azido-[alpha-(32)P]ATP. IP(3)R1 and IP(3)R3 were then purified and subjected to a controlled proteolysis, and the labeled proteolytic fragments were identified by site-specific antibodies. Two fragments of IP(3)R1 were labeled, each containing one of the previously proposed ATP-binding sites with amino acid sequence GXGXXG (amino acids 1773-1780 and 2016-2021, respectively). In IP(3)R3, only one fragment was labeled. This fragment contained the GXGXXG sequence (amino acids 1920-1925), which is conserved in the three IP(3)R isoforms. The presence of multiple interaction sites for ATP was also evident from the IP(3)-induced Ca(2+) release in permeabilized A7r5 cells, which depended on ATP over a very broad concentration range from micromolar to millimolar.

Direct association of ligand-binding and pore domains in homo- and heterotetrameric inositol 1,4,5-trisphosphate receptors

Inositol 1,4,5-trisphosphate receptors (IP(3)Rs) are a family of intracellular Ca(2+) channels that exist as homo- or heterotetramers. In order to determine whether the N-terminal ligand-binding domain is in close physical proximity to the C-terminal pore domain, we prepared microsomal membranes from COS-7 cells expressing recombinant type I and type III IP(3)R isoforms. Trypsin digestion followed by cross-linking and co-immunoprecipitation of peptide fragments suggested an inter-subunit N- and C-terminal interaction in both homo- and heterotetramers. This observation was further supported by the ability of in vitro translated C-terminal peptides to interact specifically with an N-terminal fusion protein. Using a (45)Ca(2+) flux assay, we provide functional evidence that the ligand-binding domain of one subunit can gate the pore domain of an adjacent subunit. We conclude that common structural motifs are shared between the type I and type III IP(3)Rs and propose that the gating mechanism of IP(3)R Ca(2+) channels involves the association of the N-terminus of one subunit with the C-terminus of an adjacent subunit in both homo- and heterotetrameric complexes.

Functional properties of recombinant type I and type III inositol 1, 4,5-trisphosphate receptor isoforms expressed in COS-7 cells

Inositol 1,4,5-trisphosphate receptors (IP(3)Rs) are ubiquitous intracellular Ca(2+) release channels whose functional characterization by transfection has proved difficult due to the background contribution of endogenous channels. In order to develop a functional assay to measure recombinant channels, we transiently transfected the rat type I IP(3)R into COS-7 cells. Saponin-permeabilized COS cells transfected with type I IP(3)R showed a 50% increase in inositol 1,4,5-trisphosphate (IP(3))-mediated Ca(2+) release at saturating [IP(3)] (10 micrometer) but no enhancement at subsaturating [IP(3)] (300 nm). However, cotransfection of the IP(3)R and human sarco/endoplasmic reticulum ATPase (SERCA)-2b ATPase cDNA resulted in 60 and 110% increases in Ca(2+) release at subsaturating and saturating doses of IP(3), respectively. IP(3) or adenophostin A failed to release (45)Ca(2+) from microsomal vesicles prepared from cells expressing either type I IP(3)R or SERCA cDNAs alone. However, microsomal vesicles prepared from cells doubly transfected with IP(3)R and SERCA cDNAs released 33.0 +/- 0.04% of the A23187-sensitive pool within 30 s of 1 micrometer adenophostin A addition. Similarly, the initial rate of (45)Ca(2+) influx into oxalate-loaded microsomal vesicles was inhibited by IP(3) only when the microsomes were prepared from COS cells doubly transfected with SERCA-2b and IP(3)R DNA. The absence of a functional contribution from endogenous IP(3)Rs has enabled the use of this assay to measure the Ca(2+) sensitivities of IP(3)-mediated (45)Ca(2+) fluxes through recombinant neuronal type I (SII(+)), peripheral type I (SII(-)), and type III IP(3)Rs. All three channels displayed a biphasic dependence upon [Ca(2+)](cyt). Introduction of mutations D2550A and D2550N in the putative pore-forming region of the type I IP(3)R inhibited IP(3)-mediated (45)Ca(2+) fluxes, whereas the conservative substitution D2550E was without effect. This assay therefore provides a useful tool for studying the regulatory properties of individual IP(3)R isoforms as well as for screening pore mutations prior to more detailed electrophysiological analyses.

Factors determining the composition of inositol trisphosphate receptor hetero-oligomers expressed in COS cells

COS-7 cells were transiently transfected with type I and type III myo-inositol 1,4,5-trisphosphate receptor (IP(3)R) isoforms to study the processes underlying assembly and oligomerization of these tetrameric proteins. A FLAG epitope was engineered on to the N terminus of the type III IP(3)R to distinguish the transfected from the endogenous isoform. This was not necessary for the type I IP(3)R, since the endogenous levels of this isoform were extremely low. Based on sucrose gradient analysis, the transfected type I or FLAG-type III IP(3)Rs assembled into tetramers. Confocal immunofluorescence experiments confirmed that the constructs were primarily targeted to the endoplasmic reticulum. Recombinant type I IP(3)R expressed in COS cells over a 48-h period showed a negligible capacity to form hetero-oligomers with endogenous type III IP(3)Rs, based upon co-immunoprecipitation assays. However, substantial formation of hetero-oligomers was observed between recombinant receptors when the cells were simultaneously transfected with type I and FLAG-type III IP(3)Rs. Co-immunoprecipitation experiments using lysates from metabolically labeled cells allowed the quantitation of homo- and hetero-oligomers in cells transfected with different ratios of type I and FLAG-type III IP(3)R DNA. These studies show that the relative expression level of the two isoforms influences the fraction of hetero-oligomers formed. However, the proportion of hetero-oligomers formed were less than predicted by a binomial model in which the association of subunits is assumed to be random. In doubly transfected cells, the early kinetics of (35)S label incorporation into homotetramers showed a lag period corresponding to the time taken to synthesize a full-length receptor. However, hetero-oligomers were synthesized with a longer lag period, suggesting that there may be kinetic constraints that favor homo-oligomers over hetero-oligomers.

Association of the inositol (1,4,5)-trisphosphate receptor ligand binding site with phosphatidylinositol (4,5)-bisphosphate and adenophostin A

The inositol 1,4,5-trisphosphate receptor (InsP(3)R) is activated by InsP(3) binding to amino-terminal ligand binding domain (InsP(3)R-N). Recently we reported functional coupling of phosphatidylinositol (4, 5)-bisphosphate (PIP(2)) to the InsP(3)R. Specific binding of PIP(2) to InsP(3)R-N domain was postulated as a part of the InsP(3)R-PIP(2) functional coupling model. Here we utilized bacterially expressed and purified InsP(3)R-N domain to characterize its binding specificity for InsP(3), Adenophostin A (AdA) and the water-soluble PIP(2) analog dioctanoyl-(4,5)PIP(2) (ShPIP(2)). Obtained data led us to conclude that specific InsP(3), AdA, and ShPIP(2) binding sites are located within the InsP(3)R-N domain, that the extra receptor binding element responsible for enhanced binding of AdA is an integral part of the InsP(3)R-N domain, that ShPIP(2) is able to displace InsP(3) from the InsP(3)R-N, but InsP(3) or AdA is unable to completely displace ShPIP(2). These results support the InsP(3)R-PIP(2) functional coupling model and provide novel insights into InsP(3)R ligand specificity.

The translocon: a dynamic gateway at the ER membrane

Cotranslational protein translocation across and integration into the membrane of the endoplasmic reticulum (ER) occur at sites termed translocons. Translocons are composed of several ER membrane proteins that associate to form an aqueous pore through which secretory proteins and lumenal domains of membrane proteins pass from the cytoplasm to the ER lumen. These sites are not passive holes in the bilayer, but instead are quite dynamic both structurally and functionally. Translocons cycle between ribosome-bound and ribosome-free states, and convert between translocation and integration modes of operation. These changes in functional state are accompanied by structural rearrangements that alter translocon conformation, composition, and interactions with ligands such as the ribosome and BiP. Recent studies have revealed that the translocon is a complex and sophisticated molecular machine that regulates the movement of polypeptides through the bilayer, apparently in both directions as well as laterally into the bilayer, all while maintaining the membrane permeability barrier.