Mechanical biochemistry of proteins one molecule at a time

Probing the Epidermal Growth Factor Receptor under Piconewton Mechanical Compressive Force Manipulations

Studying the relationship among protein structure, dynamics, and function under external compressive forces offers valuable insights. While extensive research has focused on manipulating protein dynamics and ligand-receptor interactions under pulling forces, the exploration of protein conformational changes under compressive forces has been limited. In this study, we investigate the response of unliganded epidermal growth factor receptor (EGFR) monomers, liganded EGF-EGFR monomers, and dimers when exposed to external compressive forces using a home-modified AFM setup with an ultrasoft AFM tip. We observed that both ligand-bound and unbound EGFR proteins can undergo spontaneous tertiary structural rupture under piconewton-level compressive forces, a previously hidden protein behavior that may play a significant role in protein cell signaling. The magnitudes of the threshold compressive forces obtained in our study lie in the range of tens and hundreds of piconewtons (pN), which is accessible within a live biological system. Moreover, we developed a kinetic model to exhibit that only a fraction of the uniaxial compressive force exerted by the AFM tip affects the internal tension that causes a pseudopulling force within the protein before it undergoes the tertiary structural rupture. This calculated fraction ranged from 0.45 to 0.65, depending on the protein type and the approach velocity of the AFM tip. Additionally, we employed molecular dynamics (MD) simulations, particularly Steered MD (SMD) simulations along with Umbrella Sampling (US), to investigate the dynamics of unliganded and liganded EGFR in the presence of external compressive forces. These MD simulation results offer valuable insights into the flexibilities and unfolding behaviors of both liganded and unliganded EGFR proteins when subjected to external compressive forces.

Atomic Force Microscopy: Mechanosensor and Mechanotransducer for Probing Biological System from Molecules to Tissues

Atomic Force Microscopy (AFM) is a powerful technique with widespread applications in various scientific fields, including biology. It operates by precisely detecting the interaction between a sharp tip and a sample surface, providing high-resolution topographical information and mechanical properties at a nanoscale. Through the years, a deeper understanding of this tip-sample interaction and the mechanisms by which it can be more precisely regulated have invariably led to improvements in AFM imaging. Additionally, AFM can serve not only as a sensor but also as a tool for actively manipulating the mechanical properties of biological systems. By applying controlled forces to the sample surface, AFM allows for a deeper understanding of mechanotransduction pathways, the intricate signaling cascades that convert physical cues into biochemical responses. This review, is an extensive overview of the current status of AFM working either as a mechanosensor or a mechanotransducer to probe biological systems across diverse scales, from individual molecules to entire tissues is presented. Challenges are discussed and potential future research directions are elaborated.

Cytosolic Interactome Protects Against Protein Unfolding in a Single Molecule Experiment

Single molecule techniques are particularly well suited for investigating the processes of protein folding and chaperone assistance. However, current assays provide only a limited perspective on the various ways in which the cellular environment can influence the folding pathway of a protein. In this study, a single molecule mechanical interrogation assay is developed and used to monitor protein unfolding and refolding within a cytosolic solution. This allows to test the cumulative topological effect of the cytoplasmic interactome on the folding process. The results reveal a stabilization against forced unfolding for partial folds, which are attributed to the protective effect of the cytoplasmic environment against unfolding and aggregation. This research opens the possibility of conducting single molecule molecular folding experiments in quasi-biological environments.

Expanded Conformations of Monomeric Tau Initiate Its Amyloidogenesis

Understanding early amyloidogenesis is key to rationally develop therapeutic strategies. Tau protein forms well-characterized pathological deposits but its aggregation mechanism is still poorly understood. Using single-molecule force spectroscopy based on a mechanical protection strategy, we studied the conformational landscape of the monomeric tau repeat domain (tau-RD_244-368 ). We found two sets of conformational states, whose frequency is influenced by mutations and the chemical context. While pathological mutations Δ280K and P301L and a pro-amyloidogenic milieu favored expanded conformations and destabilized local structures, an anti-amyloidogenic environment promoted a compact ensemble, including a conformer whose topology might mask two amyloidogenic segments. Our results reveal that to initiate aggregation, monomeric tau-RD_244-368 decreases its polymorphism adopting expanded conformations. This could account for the distinct structures found in vitro and across tauopathies.

Energy Landscape of Ubiquitin Is Weakly Multidimensional

Single molecule pulling experiments report time-dependent changes in the extension (X) of a biomolecule as a function of the applied force (f). By fitting the data to one-dimensional analytical models of the energy landscape, we can extract the hopping rates between the folded and unfolded states in two-state folders as well as the height and the location of the transition state (TS). Although this approach is remarkably insightful, there are cases for which the energy landscape is multidimensional (catch bonds being the most prominent). To assess if the unfolding energy landscape in small single domain proteins could be one-dimensional, we simulated force-induced unfolding of ubiquitin (Ub) using the coarse-grained self-organized polymer-side chain (SOP-SC) model. Brownian dynamics simulations using the SOP-SC model reveal that the Ub energy landscape is weakly multidimensional (WMD), governed predominantly by a single barrier. The unfolding pathway is confined to a narrow reaction pathway that could be described as diffusion in a quasi-1D X-dependent free energy profile. However, a granular analysis using the P_fold analysis, which does not assume any form for the reaction coordinate, shows that X alone does not account for the height and, more importantly, the location of the TS. The f-dependent TS location moves toward the folded state as f increases, in accord with the Hammond postulate. Our study shows that, in addition to analyzing the f-dependent hopping rates, the transition state ensemble must also be determined without resorting to X as a reaction coordinate to describe the unfolding energy landscapes of single domain proteins, especially if they are only WMD.

Force Spectroscopy Mapping of the Effect of Hydration on the Stiffness and Deformability of Phytoglycogen Nanoparticles

Phytoglycogen is a naturally occurring glucose polymer that is produced by sweet corn in the form of compact nanoparticles with a dendritic or tree-like architecture. The soft and porous nature of the nanoparticles, combined with their biodegradability and lack of toxicity, makes them ideal for a broad range of applications in personal care, nutrition, and biomedicine. To fully exploit these applications, it is necessary to understand the complex properties of the soft, hydrated nanoparticles in detail. In the present study, we have used atomic force microscopy (AFM) force spectroscopy to collect high-resolution force-distance maps of a large number of individual phytoglycogen nanoparticles, providing unique insights into the morphology and mechanical stiffness of the nanoparticles at the single-particle level. Our measurements performed in water on nanoparticles covalently bonded to gold surfaces revealed an inner branched structure and high deformability of the nanoparticles at modest values of the applied force. These measurements also allowed us to determine the spatial distribution of Young's modulus values within individual nanoparticles. Drying of the nanoparticles resulted in a dramatic increase in Young's modulus, quantifying the effect of hydration on their mechanical stiffness. We obtained excellent agreement between AFM and osmotic pressure measurements of the mechanical properties of hydrated phytoglycogen nanoparticles; the ratio of the average Young's modulus measured using AFM to the bulk modulus measured using osmotic pressure was in close agreement with that expected for a material with Poisson's ratio ν = 0. The soft, deformable nature of phytoglycogen nanoparticles revealed by our measurements provides new insights at the single-nanoparticle level and suggests their suitability for biomedical applications such as transdermal and targeted drug delivery.

Reconstruction of mechanical unfolding and refolding pathways of proteins with atomic force spectroscopy and computer simulations

Most proteins in proteomes are large, typically consist of more than one domain and are structurally complex. This often makes studying their mechanical unfolding pathways challenging. Proteins composed of tandem repeat domains are a subgroup of multi-domain proteins that, when stretched, display a saw-tooth pattern in their mechanical unfolding force extension profiles due to their repetitive structure. However, the assignment of force peaks to specific repeats undergoing mechanical unraveling is complicated because all repeats are similar and they interact with their neighbors and form a contiguous tertiary structure. Here, we describe in detail a combination of experimental and computational single-molecule force spectroscopy methods that proved useful for examining the mechanical unfolding and refolding pathways of ankyrin repeat proteins. Specifically, we explain and delineate the use of atomic force microscope-based single molecule force spectroscopy (SMFS) to record the mechanical unfolding behavior of ankyrin repeat proteins and capture their unusually strong refolding propensity that is responsible for generating impressive refolding force peaks. We also describe Coarse Grain Steered Molecular Dynamic (CG-SMD) simulations which complement the experimental observations and provide insights in understanding the unfolding and refolding of these proteins. In addition, we advocate the use of novel coiled-coils-based mechanical polypeptide probes which we developed to demonstrate the vectorial character of folding and refolding of these repeat proteins. The combination of AFM-based SMFS on native and CC-equipped proteins with CG-SMD simulations is powerful not only for ankyrin repeat polypeptides, but also for other repeat proteins and more generally to various multidomain, non-repetitive proteins with complex topologies.

Divergent CPEB prion-like domains reveal different assembly mechanisms for a generic amyloid-like fold

BACKGROUND

Amyloids are ordered, insoluble protein aggregates, characterized by a cross-β sheet quaternary structure in which molecules in a β-strand conformation are stacked along the filament axis via intermolecular interactions. While amyloids are typically associated with pathological conditions, functional amyloids have also been identified and are present in a wide variety of organisms ranging from bacteria to humans. The cytoplasmic polyadenylation element-binding (CPEB) prion-like protein is an mRNA-binding translation regulator, whose neuronal isoforms undergo activity-dependent aggregation, a process that has emerged as a plausible biochemical substrate for memory maintenance. CPEB aggregation is driven by prion-like domains (PLD) that are divergent in sequence across species, and it remains unknown whether such divergent PLDs follow a similar aggregating assembly pathway. Here, we describe the amyloid-like features of the neuronal Aplysia CPEB (ApCPEB) PLD and compare them to those of the Drosophila ortholog, Orb2 PLD.

RESULTS

Using in vitro single-molecule and bulk biophysical methods, we find transient oligomers and mature amyloid-like filaments that suggest similarities in the late stages of the assembly pathway for both ApCPEB and Orb2 PLDs. However, while prior to aggregation the Orb2 PLD monomer remains mainly as a random coil in solution, ApCPEB PLD adopts a diversity of conformations comprising α-helical structures that evolve to coiled-coil species, indicating structural differences at the beginning of their amyloid assembly pathways.

CONCLUSION

Our results indicate that divergent PLDs of CPEB proteins from different species retain the ability to form a generic amyloid-like fold through different assembly mechanisms.

Mechanical Stability of a Small, Highly-Luminescent Engineered Protein NanoLuc

NanoLuc is a bioluminescent protein recently engineered for applications in molecular imaging and cellular reporter assays. Compared to other bioluminescent proteins used for these applications, like Firefly Luciferase and Renilla Luciferase, it is ~150 times brighter, more thermally stable, and smaller. Yet, no information is known with regards to its mechanical properties, which could introduce a new set of applications for this unique protein, such as a novel biomaterial or as a substrate for protein activity/refolding assays. Here, we generated a synthetic NanoLuc derivative protein that consists of three connected NanoLuc proteins flanked by two human titin I91 domains on each side and present our mechanical studies at the single molecule level by performing Single Molecule Force Spectroscopy (SMFS) measurements. Our results show each NanoLuc repeat in the derivative behaves as a single domain protein, with a single unfolding event occurring on average when approximately 72 pN is applied to the protein. Additionally, we performed cyclic measurements, where the forces applied to a single protein were cyclically raised then lowered to allow the protein the opportunity to refold: we observed the protein was able to refold to its correct structure after mechanical denaturation only 16.9% of the time, while another 26.9% of the time there was evidence of protein misfolding to a potentially non-functional conformation. These results show that NanoLuc is a mechanically moderately weak protein that is unable to robustly refold itself correctly when stretch-denatured, which makes it an attractive model for future protein folding and misfolding studies.

Insights into the biophysical forces between proteins involved in elastic fiber assembly

Elastogenesis is a complex process beginning with transcription, translation, and extracellular release of precursor proteins leading to crosslinking, deposition, and assembly of ubiquitous elastic fibers. While the biochemical pathways by which elastic fibers are assembled are known, the biophysical forces mediating the interactions between the constituent proteins are unknown. Using atomic force microscopy, we quantified the adhesive forces among the elastic fiber components, primarily between tropoelastin, elastin binding protein (EBP), fibrillin-1, fibulin-5, and lysyl oxidase-like 2 (LOXL2). The adhesive forces between tropoelastin and other tissue-derived proteins such as insoluble elastin, laminin, and type I collagens were also assessed. The adhesive forces between tropoelastin and laminin were strong (1767 ± 126 pN; p < 10-5vs. all others), followed by forces (≥200 pN) between tropoelastin and human collagen, mature elastin, or tropoelastin. The adhesive forces between tropoelastin and rat collagen, EBP, fibrillin-1, fibulin-5, and LOXL2 coated on fibrillin-1 were in the range of 100-200 pN. The forces between tropoelastin and LOXL2, LOXL2 and fibrillin-1, LOXL2 and fibulin-5, and fibrillin-1 and fibulin-5 were less than 100 pN. Introducing LOXL2 decreased the adhesive forces between the tropoelastin monomers by ∼100 pN. The retraction phase of force-deflection curves was fitted to the worm-like chain model to calculate the rigidity and flexibility of these proteins as they unfolded. The results provided insights into how each constituent's stretching under deformation contributes to structural and mechanical characteristics of these fibers and to elastic fiber assembly.

The SecA motor generates mechanical force during protein translocation

The Sec translocon moves proteins across lipid bilayers in all cells. The Sec channel enables passage of unfolded proteins through the bacterial plasma membrane, driven by the cytosolic ATPase SecA. Whether SecA generates mechanical force to overcome barriers to translocation posed by structured substrate proteins is unknown. Here, we kinetically dissect Sec-dependent translocation by monitoring translocation of a folded substrate protein with tunable stability at high time resolution. We find that substrate unfolding constitutes the rate-limiting step during translocation. Using single-molecule force spectroscopy, we also define the response of the protein to mechanical force. Relating the kinetic and force measurements reveals that SecA generates at least 10 piconewtons of mechanical force to actively unfold translocating proteins, comparable to cellular unfoldases. Combining biochemical and single-molecule measurements thus allows us to define how the SecA motor ensures efficient and robust export of proteins that contain stable structure.

The ATPase SecA drives Sec-dependent protein translocation across the bacterial plasma membrane. Here, the authors combine kinetic translocation measurements with single-molecule force spectroscopy and demonstrate that the SecA motor generates mechanical force to unfold and translocate preproteins.

How mechanical forces can modulate the metal affinity and selectivity of metal binding sites in proteins

The results obtained reveal that applying mechanical forces with a given strength and directionality can modulate the metal affinity and selectivity of metal binding sites in metalloproteins.

Probing the Basis of α-Synuclein Aggregation by Comparing Simulations to Single-Molecule Experiments

Intrinsically disordered proteins often play an important role in protein aggregation. However, it is challenging to determine the structures and interactions that drive the early stages of aggregation because they are transient and obscured in a heterogeneous mixture of disordered states. Even computational methods are limited because the lack of ordered structure makes it difficult to ensure that the relevant conformations are sampled. We address these challenges by integrating atomistic simulations with high-resolution single-molecule measurements reported previously, using the measurements to help discern which parts of the disordered ensemble of structures in the simulations are most probable while using the simulations to identify residues and interactions that are important for oligomer stability. This approach was applied to α-synuclein, an intrinsically disordered protein that aggregates in the context of Parkinson's disease. We simulated single-molecule pulling experiments on dimers, the minimal oligomer, and compared them to force spectroscopy measurements. Force-extension curves were simulated starting from a set of 66 structures with substantial structured content selected from the ensemble of dimer structures generated at zero force via Monte Carlo simulations. The pattern of contour length changes as the structures unfolded through intermediate states was compared to the results from optical trapping measurements on the same dimer to discern likely structures occurring in the measurements. Simulated pulling curves were generally consistent with experimental data but with a larger number of transient intermediates. We identified an ensemble of β-rich dimer structures consistent with the experimental data from which dimer interfaces could be deduced. These results suggest specific druggable targets in the structural motifs of α-synuclein that may help prevent the earliest steps of oligomerization.

Using Single-Molecule Chemo-Mechanical Unfolding to Simultaneously Probe Multiple Structural Parameters in Protein Folding

While single-molecule force spectroscopy has greatly advanced the study of protein folding, there are limitations to what can be learned from studying the effect of force alone. We developed a novel technique, chemo-mechanical unfolding, that combines multiple perturbants—force and chemical denaturant—to more fully characterize the folding process by simultaneously probing multiple structural parameters—the change in end-to-end distance, and solvent accessible surface area. Here, we describe the theoretical background, experimental design, and data analysis for chemo-mechanical unfolding experiments probing protein folding thermodynamics and kinetics. This technique has been applied to characterize parallel protein folding pathways, the protein denatured state, protein folding on the ribosome, and protein folding intermediates.

Efficient and simplified nanomechanical analysis of intrinsically disordered proteins

Intrinsically disordered proteins (IDPs) lack a tertiary structure. Amyloidogenic IDPs (aIDPs) in particular have attracted great interest due to their implication in several devastating diseases as well as in critical biological functions. However, the conformational changes that trigger amyloid formation in aIDPs are largely unknown. aIDPs' conformational polymorphism at the monomer level encumbers their study using bulk techniques. Single-molecule techniques like atomic force microscopy-based single-molecule force spectroscopy represent a promising approach and a "carrier-guest" strategy, in which the protein of interest is mechanically protected, was developed to overcome the spurious signals from the noisy proximal region. However, since the carrier and single-molecule markers have similar mechanostabilities, their signals can intermingle in the force-extension recordings, making peak selection and analysis very laborious, cumbersome and prone to error for the non-expert. Here we have developed a new carrier, the c8C module from the CipC scaffoldin, with a higher mechanostability so that the signals from the protected protein will appear at the end of the recordings. This assures an accurate, more efficient and expert-independent analysis, simplifying both the selection and analysis of the single-molecule data. Furthermore, this modular design can be integrated into any SMFS polyprotein-based vector, thus constituting a useful utensil in the growing toolbox of protein nanomechanics.

Protein folding and unfolding under force

The recent revolution in optics and instrumentation has enabled the study of protein folding using extremely low mechanical forces as the denaturant. This exciting development has led to the observation of the protein folding process at single molecule resolution and its response to mechanical force. Here, we describe the principles and experimental details of force spectroscopy on proteins, with a focus on the optical tweezers instrument. Several recent results will be discussed to highlight the importance of this technique in addressing a variety of questions in the protein folding field.

The Mechanochemistry of a Structural Zinc Finger

Zinc fingers are highly ubiquitous structural motifs that provide stability to proteins, thus contributing to their correct folding. Despite the high thermodynamic stability of the ZnCys4 centers, their kinetic properties display remarkable lability. Here, we use a combination of protein engineering with single molecule force spectroscopy atomic force microscopy (AFM) to uncover the surprising mechanical lability (∼90 pN) of the individual Zn-S bonds that form the two equivalent zinc finger motifs embedded in the structure of the multidomain DnaJ chaperone. Rational mutations within the zinc coordinating residues enable direct identification of the chemical determinants that regulate the interplay between zinc binding-requiring the presence of all four cysteines-and disulfide bond formation. Finally, our observations show that binding to hydrophobic short peptides drastically increases the mechanical stability of DnaJ. Altogether, our experimental approach offers a detailed, atomistic vista on the fine chemical mechanisms that govern the nanomechanics of individual, naturally occurring zinc finger.

UNC-45B chaperone: the role of its domains in the interaction with the myosin motor domain

The proper folding of many proteins can only be achieved by interaction with molecular chaperones. The molecular chaperone UNC-45B is required for the folding of striated muscle myosin II. However, the precise mechanism by which it contributes to proper folding of the myosin head remains unclear. UNC-45B contains three domains: an N-terminal TPR domain known to bind Hsp90, a Central domain of unknown function, and a C-terminal UCS domain known to interact with the myosin head. Here we used fluorescence titrations methods, dynamic light scattering, and single-molecule atomic force microscopy (AFM) unfolding/refolding techniques to study the interactions of the UCS and Central domains with the myosin motor domain. We found that both the UCS and the Central domains bind to the myosin motor domain. Our data show that the domains bind to distinct subsites on the myosin head, suggesting distinct roles in forming the myosin-UNC-45B complex. To determine the chaperone activity of the UCS and Central domains, we used two different methods: 1), prevention of misfolding using single-molecule AFM, and 2), prevention of aggregation using dynamic light scattering. Using the first method, we found that the UCS domain is sufficient to prevent misfolding of a titin mechanical reporter. Application of the second method showed that the UCS domain but not the Central domain prevents the thermal aggregation of the myosin motor domain. We conclude that while both the UCS and the Central domains bind the myosin head with high affinity, only the UCS domain displays chaperone activity.

Quantitatively probing propensity for structural transitions in engineered virus nanoparticles by single-molecule mechanical analysis

Viruses are increasingly being studied from the perspective of fundamental physics at the nanoscale as biologically evolved nanodevices with many technological applications. In viral particles of the minute virus of mice (MVM), folded segments of the single-stranded DNA genome are bound to the capsid inner wall and act as molecular buttresses that increase locally the mechanical stiffness of the particle. We have explored whether a quantitative linkage exists in MVM particles between their DNA-mediated stiffening and impairment of a heat-induced, virus-inactivating structural change. A series of structurally modified virus particles with disrupted capsid-DNA interactions and/or distorted capsid cavities close to the DNA-binding sites were engineered and characterized, both in classic kinetics assays and by single-molecule mechanical analysis using atomic force microscopy. The rate constant of the virus inactivation reaction was found to decrease exponentially with the increase in elastic constant (stiffness) of the regions closer to DNA-binding sites. The application of transition state theory suggests that the height of the free energy barrier of the virus-inactivating structural transition increases linearly with local mechanical stiffness. From a virological perspective, the results indicate that infectious MVM particles may have acquired the biological advantage of increased survival under thermal stress by evolving architectural elements that rigidify the particle and impair non-productive structural changes. From a nanotechnological perspective, this study provides proof of principle that determination of mechanical stiffness and its manipulation by protein engineering may be applied for quantitatively probing and tuning the conformational dynamics of virus-based and other protein-based nanoassemblies.

Analysis of the REJ Module of Polycystin-1 Using Molecular Modeling and Force-Spectroscopy Techniques

Polycystin-1 is a large transmembrane protein, which, when mutated, causes autosomal dominant polycystic kidney disease, one of the most common life-threatening genetic diseases that is a leading cause of kidney failure. The REJ (receptor for egg lelly) module is a major component of PC1 ectodomain that extends to about 1000 amino acids. Many missense disease-causing mutations map to this module; however, very little is known about the structure or function of this region. We used a combination of homology molecular modeling, protein engineering, steered molecular dynamics (SMD) simulations, and single-molecule force spectroscopy (SMFS) to analyze the conformation and mechanical stability of the first ~420 amino acids of REJ. Homology molecular modeling analysis revealed that this region may contain structural elements that have an FNIII-like structure, which we named REJd1, REJd2, REJd3, and REJd4. We found that REJd1 has a higher mechanical stability than REJd2 (~190 pN and 60 pN, resp.). Our data suggest that the putative domains REJd3 and REJd4 likely do not form mechanically stable folds. Our experimental approach opens a new way to systematically study the effects of disease-causing mutations on the structure and mechanical properties of the REJ module of PC1.

Tracking unfolding and refolding reactions of single proteins using atomic force microscopy methods

During the last two decades single-molecule manipulation techniques such as atomic force microscopy (AFM) has risen to prominence through their unique capacity to provide fundamental information on the structure and function of biomolecules. Here we describe the use of single-molecule AFM to track protein unfolding and refolding pathways, enzymatic catalysis and the effects of osmolytes and chaperones on protein stability and folding. We will outline the principles of operation for two different AFM pulling techniques: length clamp and force-clamp and discuss prominent applications. We provide protocols for the construction of polyproteins which are amenable for AFM experiments, the preparation of different coverslips, choice and calibration of AFM cantilevers. We also discuss the selection criteria for AFM recordings, the calibration of AFM cantilevers, protein sample preparations and analysis of the obtained data.

Engineered bi-histidine metal chelation sites map the structure of the mechanical unfolding transition state of an elastomeric protein domain GB1

Determining the structure of the transition state is critical for elucidating the mechanism behind how proteins fold and unfold. Due to its high free energy, however, the transition state generally cannot be trapped and studied directly using traditional structural biology methods. Thus, characterizing the structure of the transition state that occurs as proteins fold and unfold remains a major challenge. Here, we report a novel (to our knowledge) method that uses engineered bi-histidine (bi-His) metal-binding sites to directly map the structure of the mechanical unfolding transition state of proteins. This method is adapted from the traditional ψ-value analysis, which uses engineered bi-His metal chelation sites to probe chemical (un)folding transition-state structure. The φ(M2+)(U)-value is defined as ΔΔG(‡-N)/ΔΔG(U-N), which is the energetic effects of metal chelation by the bi-His site on the unfolding energy barrier (ΔG(‡-N)) relative to its thermodynamic stability (ΔG(U-N)) and can be used to obtain information about the transition state in the mutational site. As a proof of principle, we used the small protein GB1 as a model system and set out to map its mechanical unfolding transition-state structure. Using single-molecule atomic force microscopy and spectrofluorimetry, we directly quantified the effect of divalent metal ion binding on the mechanical unfolding free energy and thermodynamic stability of GB1, which allowed us to quantify φ(M2+)(U)-values for different sites in GB1. Our results enabled us to map the structure of the mechanical unfolding transition state of GB1. Within GB1's mechanical unfolding transition state, the interface between force-bearing β-strands 1 and 4 is largely disrupted, and the first β-hairpin is partially disordered while the second β-hairpin and the α-helix remain structured. Our results demonstrate the unique application of ψ-value analysis in elucidating the structure of the transition state that occurs during the mechanical unfolding process, offering a potentially powerful new method for investigating the design of novel elastomeric proteins.

Tracking UNC-45 chaperone-myosin interaction with a titin mechanical reporter

Myosins are molecular motors that convert chemical energy into mechanical work. Allosterically coupling ATP-binding, hydrolysis, and binding/dissociation to actin filaments requires precise and coordinated structural changes that are achieved by the structurally complex myosin motor domain. UNC-45, a member of the UNC-45/Cro1/She4p family of proteins, acts as a chaperone for myosin and is essential for proper folding and assembly of myosin into muscle thick filaments in vivo. The molecular mechanisms by which UNC-45 interacts with myosin to promote proper folding of the myosin head domain are not known. We have devised a novel approach, to our knowledge, to analyze the interaction of UNC-45 with the myosin motor domain at the single molecule level using atomic force microscopy. By chemically coupling a titin I27 polyprotein to the motor domain of myosin, we introduced a mechanical reporter. In addition, the polyprotein provided a specific attachment point and an unambiguous mechanical fingerprint, facilitating our atomic force microscopy measurements. This approach enabled us to study UNC-45-motor domain interactions. After mechanical unfolding, the motor domain interfered with refolding of the otherwise robust I27 modules, presumably by recruiting them into a misfolded state. In the presence of UNC-45, I27 folding was restored. Our single molecule approach enables the study of UNC-45 chaperone interactions with myosin and their consequences for motor domain folding and misfolding in mechanistic detail.

Mechanical properties of β-catenin revealed by single-molecule experiments

β-catenin is a central component of the adaptor complex that links cadherins to the actin cytoskeleton in adherens junctions and thus, it is a good candidate to sense and transmit mechanical forces to trigger specific changes inside the cell. To fully understand its molecular physiology, we must first investigate its mechanical role in mechanotransduction within the cadherin system. We have studied the mechanical response of β-catenin to stretching using single-molecule force spectroscopy and molecular dynamics. Unlike most proteins analyzed to date, which have a fixed mechanical unfolding pathway, the β-catenin armadillo repeat region (ARM) displays low mechanostability and multiple alternative unfolding pathways that seem to be modulated by its unstructured termini. These results are supported by steered molecular dynamics simulations, which also predict its mechanical stabilization and unfolding pathway restrictions when the contiguous α-helix of the C-terminal unstructured region is included. Furthermore, simulations of the ARM/E-cadherin cytosolic tail complex emulating the most probable stress geometry occurring in vivo show a mechanical stabilization of the interaction whose magnitude correlates with the length of the stretch of the cadherin cytosolic tail that is in contact with the ARM region.

Direct observation of a force-induced switch in the anisotropic mechanical unfolding pathway of a protein

Many biological processes generate force, and proteins have evolved to resist and respond to tension along different force axes. Single-molecule force spectroscopy allows for molecular insight into the behavior of proteins under force and the mechanism of protein folding in general. Here, we have used src SH3 to investigate the effect of different pulling axes under the low-force regime afforded by an optical trap. We find that this small cooperatively folded protein shows an anisotropic response to force; the protein is more mechanically resistant to force applied along a longitudinal axis compared to force applied perpendicular to the terminal β strand. In the longitudinal axis, we observe an unusual biphasic behavior revealing a force-induced switch in the unfolding mechanism suggesting the existence of two parallel unfolding pathways. A site-specific variant can selectively affect one of these pathways. Thus, even this simple two-state protein demonstrates a complex mechanical unfolding trajectory, accessing multiple unfolding pathways under the low-force regime of the optical trap; the specific unfolding pathway depends on the perturbation axis and the applied force.

Spin-oscillator model for the unzipping of biomolecules by mechanical force

A spin-oscillator system models unzipping of biomolecules (such as DNA, RNA, or proteins) subject to an external force. The system comprises a macroscopic degree of freedom, represented by a one-dimensional oscillator, and internal degrees of freedom, represented by Glauber spins with nearest-neighbor interaction and a coupling constant proportional to the oscillator position. At a critical value F(c) of an applied external force F, the oscillator rest position (order parameter) changes abruptly and the system undergoes a first-order phase transition. When the external force is cycled at different rates, the extension given by the oscillator position exhibits a hysteresis cycle at high loading rates, whereas it moves reversibly over the equilibrium force-extension curve at very low loading rates. Under constant force, the logarithm of the residence time at the stable and metastable oscillator rest position is proportional to F-F(c) as in an Arrhenius law.

Common features at the start of the neurodegeneration cascade

A single-molecule study reveals that neurotoxic proteins share common structural features that may trigger neurodegeneration, thus identifying new targets for therapy and diagnosis.

Amyloidogenic neurodegenerative diseases are incurable conditions with high social impact that are typically caused by specific, largely disordered proteins. However, the underlying molecular mechanism remains elusive to established techniques. A favored hypothesis postulates that a critical conformational change in the monomer (an ideal therapeutic target) in these “neurotoxic proteins” triggers the pathogenic cascade. We use force spectroscopy and a novel methodology for unequivocal single-molecule identification to demonstrate a rich conformational polymorphism in the monomer of four representative neurotoxic proteins. This polymorphism strongly correlates with amyloidogenesis and neurotoxicity: it is absent in a fibrillization-incompetent mutant, favored by familial-disease mutations and diminished by a surprisingly promiscuous inhibitor of the critical monomeric β-conformational change, neurotoxicity, and neurodegeneration. Hence, we postulate that specific mechanostable conformers are the cause of these diseases, representing important new early-diagnostic and therapeutic targets. The demonstrated ability to inhibit the conformational heterogeneity of these proteins by a single pharmacological agent reveals common features in the monomer and suggests a common pathway to diagnose, prevent, halt, or reverse multiple neurodegenerative diseases.

Neurodegenerative diseases like Alzheimer's or Parkinson's are currently incurable. They are caused by different proteins that, under certain circumstances, aggregate and become toxic as we grow older, but the molecular events underlying this process remain unclear. The lack of a well-defined structure, and the tendency of these “neurotoxic proteins” to aggregate make them difficult to study using conventional techniques. Here, we use an established single-molecule manipulation technique combined with a new protein-engineering strategy to show that all these proteins can adopt a rich collection of structures (conformers) that includes a high proportion of mechanostable conformers, which are associated with toxicity and disease. We also find that a known drug can block the formation of these mechanostable structures in different neurotoxic proteins. We suggest that the most mechanostable conformers, or their precursors, may trigger the pathogenic cascade that results in toxicity. We thus propose that these mechanostable structures are ideal targets for early diagnosis, prevention, and treatment of these fatal diseases.

A facile way to tune mechanical properties of artificial elastomeric proteins-based hydrogels

Protein-based hydrogels have attracted considerable interests due to their potential applications in biomedical engineering and material sciences. Using a tandem modular protein (GB1)(8) as building blocks, we have engineered chemically cross-linked hydrogels via a photochemical cross-linking strategy, which is based on the cross-linking of two adjacent tyrosine residues into dityrosine adducts. However, because of the relatively low reactivity of tyrosine residues in GB1, (GB1)(8)-based hydrogels exhibit poor mechanical properties. Here, we report a Bolton-Hunter reagent-based, facile method to improve and tune the mechanical properties of such protein-based hydrogels. Using Bolton-Hunter reagent, we can derivatize lysine residues with phenolic functional groups to modulate the phenolic (tyrosine-like) content of (GB1)(8). We show that hydrogels made from derivatized (GB1)(8) with increased phenolic content show significantly improved mechanical properties, including improved Young's modulus, breaking modulus as well as reduced swelling. These results demonstrate the great potential of this derivatization method in constructing protein-based biomaterials with desired macroscopic mechanical properties.

Mechanical anisotropy of ankyrin repeats

Red blood cells are frequently deformed and their cytoskeletal proteins such as spectrin and ankyrin-R are repeatedly subjected to mechanical forces. While the mechanics of spectrin was thoroughly investigated in vitro and in vivo, little is known about the mechanical behavior of ankyrin-R. In this study, we combine coarse-grained steered molecular dynamics simulations and atomic force spectroscopy to examine the mechanical response of ankyrin repeats (ARs) in a model synthetic AR protein NI6C, and in the D34 fragment of native ankyrin-R when these proteins are subjected to various stretching geometry conditions. Our steered molecular dynamics results, supported by AFM measurements, reveal an unusual mechanical anisotropy of ARs: their mechanical stability is greater when their unfolding is forced to propagate from the N-terminus toward the C-terminus (repeats unfold at ~60 pN), as compared to the unfolding in the opposite direction (unfolding force ∼ 30 pN). This anisotropy is also reflected in the complex refolding behavior of ARs. The origin of this unfolding and refolding anisotropy is in the various numbers of native contacts that are broken and formed at the interfaces between neighboring repeats depending on the unfolding/refolding propagation directions. Finally, we discuss how these complex mechanical properties of ARs in D34 may affect its behavior in vivo.

Engineering proteins with enhanced mechanical stability by force-specific sequence motifs

Use of atomic force microscopy (AFM) has recently led to a better understanding of the molecular mechanisms of the unfolding process by mechanical forces; however, the rational design of novel proteins with specific mechanical strength remains challenging. We have approached this problem from a new perspective that generates linear physical-chemical properties (PCP) motifs from a limited AFM data set. Guided by our linear sequence analysis, we designed and analyzed four new mutants of the titin I1 domain with the goal of increasing the domain's mechanical strength. All four mutants could be cloned and expressed as soluble proteins. AFM data indicate that at least two of the mutants have increased molecular mechanical strength. This observation suggests that the PCP method is useful to graft sequences specific for high mechanical stability to weak proteins to increase their mechanical stability, and represents an additional tool in the design of novel proteins besides steered molecular dynamics calculations, coarse grained simulations, and ϕ-value analysis of the transition state.

A conditional gating mechanism assures the integrity of the molecular force-sensor titin kinase

As more and more recent investigations point out, force plays an important role in cellular regulation mechanisms. Biological responses to mechanical stress are often based on force-induced conformational changes of single molecules. The force sensor, titin kinase, is involved in a signaling complex that regulates protein turnover and transcriptional adaptation in striated muscle. The structural architecture of such a force sensor determines its response to force and must assure both activity and mechanical integrity, which are prerequisites for its function. Here, we use single-molecule force-clamp spectroscopy to show that titin kinase is organized in such a way that the regulatory domains have to unfold before secondary structure elements that determine the overall fold and catalytic function. The stepwise unfolding over many barriers with a topologically determined sequence assures that the protein can react to force by conformational changes while maintaining its structural integrity.

Dynamics of protein folding and cofactor binding monitored by single-molecule force spectroscopy

Many proteins in living cells require cofactors to carry out their biological functions. To reach their functional states, these proteins need to fold into their unique three-dimensional structures in the presence of their cofactors. Two processes, folding of the protein and binding of cofactors, intermingle with each other, making the direct elucidation of the folding mechanism of proteins in the presence of cofactors challenging. Here we use single-molecule atomic force microscopy to directly monitor the folding and cofactor binding dynamics of an engineered metal-binding protein G6-53 at the single-molecule level. Using the mechanical stability of different conformers of G6-53 as sensitive probes, we directly identified different G6-53 conformers (unfolded, apo- and Ni(2+)-bound) populated along the folding pathway of G6-53 in the presence of its cofactor Ni(2+). By carrying out single-molecule atomic force microscopy refolding experiments, we monitored kinetic evolution processes of these different conformers. Our results suggested that the majority of G6-53 folds through a binding-after-folding mechanism, whereas a small fraction follows a binding-before-folding pathway. Our study opens an avenue to utilizing force spectroscopy techniques to probe the folding dynamics of proteins in the presence of cofactors at the single-molecule level, and we anticipated that this method can be used to study a wide variety of proteins requiring cofactors for their function.

Single-molecule force spectroscopy of polycystic kidney disease proteins

Atomic force microscopy in its single-molecule force spectroscopy mode is a nanomanipulation technique that is extensively used for the study of the mechanical properties of proteins. It is particularly suited to examine their response to stretching (i.e., molecular elasticity and mechanical stability). Here, we describe protein engineering strategies and single-molecule AFM techniques for probing protein mechanics, with special emphasis on polycystic kidney disease (PKD) proteins. We also provide step-by-step protocols for preparing proteins and performing single-molecule force measurements.

Nonkinetic modeling of the mechanical unfolding of multimodular proteins: theory and experiments

We introduce and discuss a novel approach called back-calculation for analyzing force spectroscopy experiments on multimodular proteins. The relationship between the histograms of the unfolding forces for different peaks, corresponding to a different number of not-yet-unfolded protein modules, is exploited in such a manner that the sole distribution of the forces for one unfolding peak can be used to predict the unfolding forces for other peaks. The scheme is based on a bootstrap prediction method and does not rely on any specific kinetic model for multimodular unfolding. It is tested and validated in both theoretical/computational contexts (based on stochastic simulations) and atomic force microscopy experiments on (GB1)(8) multimodular protein constructs. The prediction accuracy is so high that the predicted average unfolding forces corresponding to each peak for the GB1 construct are within only 5 pN of the averaged directly-measured values. Experimental data are also used to illustrate how the limitations of standard kinetic models can be aptly circumvented by the proposed approach.

Direct quantification of the attempt frequency determining the mechanical unfolding of ubiquitin protein

Understanding protein dynamics requires a comprehensive knowledge of the underlying potential energy surface that governs the motion of each individual protein molecule. Single molecule mechanical studies have provided the unprecedented opportunity to study the individual unfolding pathways along a well defined coordinate, the end-to-end length of the protein. In these experiments, unfolding requires surmounting an energy barrier that separates the native from the extended state. The calculation of the absolute value of the barrier height has traditionally relied on the assumption of an attempt frequency, υ(‡). Here we used single molecule force-clamp spectroscopy to directly determine the value of υ(‡) for mechanical unfolding by measuring the unfolding rate of the small protein ubiquitin at varying temperatures. Our experiments demonstrate a significant effect of the temperature on the mechanical rate of unfolding. By extrapolating the unfolding rate in the absence of force for different temperatures, varying within the range spanning from 5 to 45 °C, we measured a value for the activation barrier of ΔG(‡) = 71 ± 5 kJ/mol and an exponential prefactor υ(‡) ∼4 × 10(9) s(-1). Although the measured prefactor value is 3 orders of magnitude smaller than the value predicted by the transition state theory (∼6 × 10(12) s(-1)), it is 400-fold higher than that encountered in analogous experiments studying the effect of temperature on the reactivity of a protein-embedded disulfide bond (∼10(7) M(-1) s(-1)). This approach will allow quantitative characterization of the complete energy landscape of a folding polypeptide from highly extended states, of capital importance for proteins with elastic function.

Kinetic partitioning mechanism governs the folding of the third FnIII domain of tenascin-C: evidence at the single-molecule level

Statistical mechanics and molecular dynamics simulations proposed that the folding of proteins can follow multiple parallel pathways on a rugged energy landscape from unfolded state en route to their folded native states. Kinetic partitioning mechanism is one of the possible mechanisms underlying such complex folding dynamics. Here, we use single-molecule atomic force microscopy technique to directly probe the multiplicity of the folding pathways of the third fibronectin type III domain from the extracellular matrix protein tenascin-C (TNfn3). By stretching individual (TNfn3)(8) molecules, we forced TNfn3 domains to undergo mechanical unfolding and refolding cycles, allowing us to directly observe the folding pathways of TNfn3. We found that, after being mechanically unraveled and then relaxed to zero force, TNfn3 follows multiple parallel pathways to fold into their native states. The majority of TNfn3 fold into the native state in a simple two-state fashion, while a small percentage of TNfn3 were found to be trapped into kinetically stable folding intermediate states with well-defined three-dimensional structures. Furthermore, the folding of TNfn3 was also influenced by its neighboring TNfn3 domains. Complex misfolded states of TNfn3 were observed, possibly due to the formation of domain-swapped dimeric structures. Our studies revealed the ruggedness of the folding energy landscape of TNfn3 and provided direct experimental evidence that the folding dynamics of TNfn3 are governed by the kinetic partitioning mechanism. Our results demonstrated the unique capability of single-molecule AFM to probe the folding dynamics of proteins at the single-molecule level.

Competing interactions stabilize pro- and anti-aggregant conformations of human Tau

Aggregation of Tau into amyloid-like fibrils is a key process in neurodegenerative diseases such as Alzheimer. To understand how natively disordered Tau stabilizes conformations that favor pathological aggregation, we applied single-molecule force spectroscopy. Intramolecular interactions that fold polypeptide stretches of ~19 and ~42 amino acids in the functionally important repeat domain of full-length human Tau (hTau40) support aggregation. In contrast, the unstructured N terminus randomly folds long polypeptide stretches >100 amino acids that prevent aggregation. The pro-aggregant mutant hTau40ΔK280 observed in frontotemporal dementia favored the folding of short polypeptide stretches and suppressed the folding of long ones. This trend was reversed in the anti-aggregant mutant hTau40ΔK280/PP. The aggregation inducer heparin introduced strong interactions in hTau40 and hTau40ΔK280 that stabilized aggregation-prone conformations. We show that the conformation and aggregation of Tau are regulated through a complex balance of different intra- and intermolecular interactions.

Inhibitor binding increases the mechanical stability of staphylococcal nuclease

Staphylococcal nuclease (SNase) catalyzes the hydrolysis of DNA and RNA in a calcium-dependent fashion. We used AFM-based single-molecule force spectroscopy to investigate the mechanical stability of SNase alone and in its complex with an SNase inhibitor, deoxythymidine 3',5'-bisphosphate. We found that the enzyme unfolds in an all-or-none fashion at ∼26 pN. Upon binding to the inhibitor, the mechanical unfolding forces of the enzyme-inhibitor complex increase to ∼50 pN. This inhibitor-induced increase in the mechanical stability of the enzyme is consistent with the increased thermodynamical stability of the complex over that of SNase. Because of its strong mechanical response to inhibitor binding, SNase, a model protein folding system, offers a unique opportunity for studying the relationship between enzyme mechanics and catalysis.

Cooperative dynamics of proteins unraveled by network models

Recent years have seen a significant increase in the number of computational studies that adopted network models for investigating biomolecular systems dynamics and interactions. In particular, elastic network models have proven useful in elucidating the dynamics and allosteric signaling mechanisms of proteins and their complexes. Here we present an overview of two most widely used elastic network models, the Gaussian Network Model (GNM) and Anisotropic Network Model (ANM). We illustrate their use in (i) explaining the anisotropic response of proteins observed in external pulling experiments, (ii) identifying residues that possess high allosteric potentials, and demonstrating in this context the propensity of catalytic sites and metal-binding sites for enabling efficient signal transduction, and (iii) assisting in structure refinement, molecular replacement and comparative modeling of ligand-bound forms via efficient sampling of energetically favored conformers.

Shape of tropoelastin, the highly extensible protein that controls human tissue elasticity

Elastin enables the reversible deformation of elastic tissues and can withstand decades of repetitive forces. Tropoelastin is the soluble precursor to elastin, the main elastic protein found in mammals. Little is known of the shape and mechanism of assembly of tropoelastin as its unique composition and propensity to self-associate has hampered structural studies. In this study, we solve the nanostructure of full-length and corresponding overlapping fragments of tropoelastin using small angle X-ray and neutron scattering, allowing us to identify discrete regions of the molecule. Tropoelastin is an asymmetric coil, with a protruding foot that encompasses the C-terminal cell interaction motif. We show that individual tropoelastin molecules are highly extensible yet elastic without hysteresis to perform as highly efficient molecular nanosprings. Our findings shed light on how biology uses this single protein to build durable elastic structures that allow for cell attachment to an appended foot. We present a unique model for head-to-tail assembly which allows for the propagation of the molecule's asymmetric coil through a stacked spring design.

Functional modes and residue flexibility control the anisotropic response of guanylate kinase to mechanical stress

The coupling between the mechanical properties of enzymes and their biological activity is a well-established feature that has been the object of numerous experimental and theoretical works. In particular, recent experiments show that enzymatic function can be modulated anisotropically by mechanical stress. We study such phenomena using a method for investigating local flexibility on the residue scale that combines a reduced protein representation with Brownian dynamics simulations. We performed calculations on the enzyme guanylate kinase to study its mechanical response when submitted to anisotropic deformations. The resulting modifications of the protein's rigidity profile can be related to the changes in substrate binding affinity observed experimentally. Further analysis of the principal components of motion of the trajectories shows how the application of a mechanical constraint on the protein can disrupt its dynamics, thus leading to a decrease of the enzyme's catalytic rate. Eventually, a systematic probe of the protein surface led to the prediction of potential hotspots where the application of an external constraint would produce a large functional response both from the mechanical and dynamical points of view. Such enzyme-engineering approaches open the possibility to tune catalytic function by varying selected external forces.

Single-molecule force-clamp spectroscopy: dwell time analysis and practical considerations

Single-molecule force-clamp spectroscopy has become a powerful tool for studying protein folding/unfolding, bond rupture, and enzymatic reactions. Different methods have been developed to analyze force-clamp spectroscopy data on polyproteins to obtain kinetic parameters characterizing the mechanical unfolding of proteins, which are often modeled as a two-state process (a Poisson process). However, because of the finite number of domains in polyproteins, the statistical analysis of the force-clamp spectroscopy data is different from that of a classical Poisson process, and the equivalency of different analysis methods remains to be proven. In this article, we show that these methods are equivalent and lead to accurate measurements of the unfolding rate constant. We also demonstrate that distinct from the constant-pulling-velocity experiments, in which the unfolding rate extracted from the data is dependent on the number of protein domains in the polyproteins (the N effect), force-clamp experiments do not show any N effect. Using a simulated data set, we also highlighted important practical considerations that one needs to take into account when using the single-molecule force-clamp spectroscopy technique to characterize the unfolding energy landscape of proteins.

Single-molecule protein unfolding and refolding using atomic force microscopy

Over the past few years, atomic force microscopy (AFM) became a prominent tool to study the mechanical properties of proteins and protein interactions on a single-molecule level. AFM together with other mechanical, single-molecule manipulating techniques (Bustamante et al., Nat Rev Mol Cell Biol 1:130-136, 2000) made it possible to probe biological molecules in a way that is complementary to single-molecule methods using chemicals or temperature as a denaturant (Borgia et al., Annu Rev Biochem 77:101-125, 2008). For example, AFM offered new insights into the process of protein folding and unfolding by probing single proteins with mechanical forces. Since many proteins fulfill mechanical function or are exerted to mechanical forces in their natural environment, AFM allows to target physiologically relevant questions. Although the number of proteins unfolded with AFM continually increases (Linke and Grutzner, Pflugers Arch 456:101-115, 2008; Zhuang and Rief, Curr Opin Struct Biol 13:88-97, 2003; Clausen-Schaumann et al., Curr Opin Chem Biol 4:524-530, 2000; Rounsevell et al., Methods 34:100-111, 2004), the total number of proteins studied so far is still relatively small (Oberhauser and Carrion-Vazquez, J Biol Chem 283:6617-6621, 2008). This chapter aims at giving protocol-like instructions for people who are actually getting started using AFM to study mechanical protein unfolding or refolding. The instruction includes different approaches to produce polyproteins or modular protein chains which are commonly used to screen for true single-molecule AFM data traces. Also, the basic principles for data collection with AFM and the basic data analysis methods are explained. For people who want to study proteins that unfold at small forces or for people who want to study protein folding which also occurs typically at small forces (<30 pN), an averaging technique is explained, allowing to increase the force resolution in this regime. For topics that would go beyond the scope of this chapter - as, for example, the details about different cantilever calibration methods - references are provided.