A Study into the Collision-induced Dissociation (CID) Behavior of Cross-Linked Peptides

Dimethyl labeling of N-terminal amines allows unambiguous identification of protein crosslinks

Protein crosslinks induced through either deliberate enzymatic oxidation or reactive oxidants (oxidative eustress/distress), are associated with multiple human pathologies including atherosclerosis, Alzheimer's and Parkinson's diseases. In many cases, the nature of the crosslinks, their position(s) either within (intramolecular) or between (intermolecular) polypeptide chains, and concentrations are unclear. Although limited data are available from specific antibodies, detailed characterization of protein crosslinks is often performed by mass spectrometric analysis of peptides from proteolytic digestion. Such analyses are challenging due to the low concentration of these species, and the complexity of their fragment ion spectra when compared to non-crosslinked species. We hypothesized that highly efficient and specific chemical amine labeling of the two N-termini in crosslinked peptides (compared to the single N-terminus of linear peptides), using "light" and "heavy" isotope-labelled reagents would facilitate identification, validation and quantification of crosslinks. This method was compared to a previous enzyme-catalyzed 18O C-terminal carboxylate labeling approach. N-terminal amine dimethyl labeling is shown to have major advantages over the 18O-approach including high labeling yields (92-100 %) and well-defined mass spectrometric isotope distribution patterns. This approach has allowed identification of novel dityrosine crosslinks between pair of tyrosine (Tyr, Y) residues in photo-oxidized β-casein (Y195-Y195, Y195-Y208, Y208-Y208), and α-synuclein exposed to nitrosative stress (Y39-Y39, Y39-Y125, Y39-Y133, Y133-Y136). This approach is also applicable to disulfide bond mapping, with 15 of 17 disulfides in serum albumin readily detected. These data indicate that dimethyl labeling is a highly versatile and efficient approach for the site-specific identification of oxidation- and nitration-induced crosslinks in proteins.

Protein identification and potential bioactive peptides from pumpkin (Cucurbita maxima) seeds

Pumpkin is an economically important crop all over the world. Approximately, 18%-21% of pumpkins, consisting of peels and seeds by-products, are wasted during processing. In addition, the seeds are rich in protein and have the potency of bioactive peptide production. This study aims to recognize the proteins and investigate the potential bioactive peptides from pumpkin (Cucurbita maxima) seeds. Pumpkin seeds were subjected to hot air drying (HAD) at 55°C for 12 h and freeze-drying (FD) at -80°C for 54 h before they were powdered, analyzed, and precipitated by isoelectric point to obtain pumpkin seed protein isolates (PSPI). PSPI comprised 11S globulin subunit beta, 2S seed storage albumin, and chaperonin CPN60-1. To generate hydrolysate peptides, PSPI was hydrolyzed using papain, pepsin, and bromelain. FD group pepsin hydrolysates had the highest peptide content of 420.83 mg/g. ACE inhibition and DPP-IV inhibition activity were analyzed for each enzymatic hydrolysate. The pepsin hydrolyzed sample exhibited the highest ACE inhibition of 70.26%, and the papain hydrolyzed sample exhibited the highest DPP-IV inhibition of 30.51%. The simulated gastrointestinal digestion (SGID) conducted by pepsin and pancreatin increased ACE inhibitory activity from 76.93% to 78.34%, and DPP-IV inhibited activity increased from 58.62% to 77.13%. Pepsin and papain hydrolysates were fractionated using ultrafiltration to measure ACE and DPP-IV inhibition activity. The highest free radical scavenging abilities were exhibited by the <1 kDa hydrolysate fractions with 78.34% ACE inhibitory activities and 79.55% DPP-IV inhibitory activities. This research revealed that pumpkin seeds had the potency to produce bioactive peptides.

UNC-45 assisted myosin folding depends on a conserved FX3HY motif implicated in Freeman Sheldon Syndrome

Myosin motors are critical for diverse motility functions, ranging from cytokinesis and endocytosis to muscle contraction. The UNC-45 chaperone controls myosin function mediating the folding, assembly, and degradation of the muscle protein. Here, we analyze the molecular mechanism of UNC-45 as a hub in myosin quality control. We show that UNC-45 forms discrete complexes with folded and unfolded myosin, forwarding them to downstream chaperones and E3 ligases. Structural analysis of a minimal chaperone:substrate complex reveals that UNC-45 binds to a conserved FX3HY motif in the myosin motor domain. Disrupting the observed interface by mutagenesis prevents myosin maturation leading to protein aggregation in vivo. We also show that a mutation in the FX3HY motif linked to the Freeman Sheldon Syndrome impairs UNC-45 assisted folding, reducing the level of functional myosin. These findings demonstrate that a faulty myosin quality control is a critical yet unexplored cause of human myopathies.

Cleavable Cross-Linkers Redefined by a Novel MS3-Trigger Algorithm

Cross-linking mass spectrometry (MS) is currently transitioning from a routine tool in structural biology to enabling structural systems biology. MS-cleavable cross-linkers could substantially reduce the associated search space expansion by allowing a MS3-based approach for identifying cross-linked peptides. However, MS2 (MS/MS)-based approaches currently outperform approaches utilizing MS3. We show here that the sensitivity and specificity of triggering MS3 have been hampered algorithmically. Our four-step MS3-trigger algorithm greatly outperformed currently employed methods and comes close to reaching the theoretical limit.

All-in-One Pseudo-MS3 Method for the Analysis of Gas-Phase Cleavable Protein Crosslinking Reactions

Crosslinking mass spectrometry (XL-MS) supports structure analysis of individual proteins and highly complex whole-cell interactomes. The identification of crosslinked peptides from enzymatic digests remains challenging, especially at the cell level. Empirical methods that use gas-phase cleavable crosslinkers can simplify the identification process by enabling an MS3-based strategy that turns crosslink identification into a simpler problem of detecting two separable peptides. However, the method is limited to select instrument platforms and is challenged by duty cycle constraints. Here, we revisit a pseudo-MS3 concept that incorporates in-source fragmentation, where a fast switch between gentle high-transmission source conditions and harsher in-source fragmentation settings liberates peptides for standard MS2-based peptide identification. We present an all-in-one method where retention time matches between the crosslink precursor and the liberated peptides establish linkage, and MS2 sequencing identifies the source-liberated peptides. We demonstrate that DC4, a very labile cleavable crosslinker, generates high-intensity peptides in-source. Crosslinks can be identified from these liberated peptides, as they are chromatographically well-resolved from monolinks. Using bovine serum albumin (BSA) as a crosslinking test case, we detect 27% more crosslinks with pseudo-MS3 over a best-in-class MS3 method. While performance is slightly lower for whole-cell lysates (generating two-thirds of the identifications of a standard method), we find that 60% of these hits are unique, highlighting the complementarity of the method.

Innovation in Cross-Linking Mass Spectrometry Workflows: Toward a Comprehensive, Flexible, and Customizable Data Analysis Platform

Cross-linking mass spectrometry (XL-MS) is widely used in the analysis of protein structure and protein-protein interactions (PPIs). Throughout the entire workflow, the utilization of cross-linkers and the interpretation of cross-linking data are the core steps. In recent years, the development of cross-linkers and analytical software mostly follow up on the classical models of non-cleavable cross-linkers such as BS3/DSS and MS-cleavable cross-linkers such as DSSO. Although such a paradigm promotes the maturity and robustness of the XL-MS field, it confines the innovation and flexibility of new cross-linkers and analytical software. This critical insight will discuss the classification, advantages, and disadvantages of existing data analysis search engines. Take the new platinum-based metal cross-linker as an example, potential pitfalls in characterization of cross-linked peptides using existing software are discussed. Finally, ideas on developing more flexible, comprehensive, and user-friendly cross-linkers and software tools are proposed.

Comparative Analysis of Chemical Cross-Linking Mass Spectrometry Data Indicates That Protein STY Residues Rarely React with N-Hydroxysuccinimide Ester Cross-Linkers

When it comes to mass spectrometry data analysis for identification of peptide pairs linked by N-hydroxysuccinimide (NHS) ester cross-linkers, search engines bifurcate in their setting of cross-linkable sites. Some restrict NHS ester cross-linkable sites to lysine (K) and protein N-terminus, referred to as K only for short, whereas others additionally include serine (S), threonine (T), and tyrosine (Y) by default. Here, by setting amino acids with chemically inert side chains such as glycine (G), valine (V), and leucine (L) as cross-linkable sites, which serves as a negative control, we show that software-identified STY-cross-links are only as reliable as GVL-cross-links. This is true across different NHS ester cross-linkers including DSS, DSSO, and DSBU, and across different search engines including MeroX, xiSearch, and pLink. Using a published data set originated from synthetic peptides, we demonstrate that STY-cross-links indeed have a high false discovery rate. Further analysis revealed that depending on the data and the search engine used to analyze the data, up to 65% of the STY-cross-links identified are actually K-K cross-links of the same peptide pairs, up to 61% are actually K-mono-links, and the rest tend to contain short peptides at high risk of false identification.

An approach to nearest neighbor analysis of pigment-protein complexes using chemical cross-linking in combination with mass spectrometry

Protein cross-linking is the process of chemically joining two amino acids in a protein or protein complex by a covalent bond. When combined with mass spectrometry, it becomes one of the structural mass spectrometry techniques gaining in importance for deriving valuable three-dimensional structural information on proteins and protein complexes. This platform complements existing structural methods, such as NMR spectroscopy, X-ray crystallography, and cryo-EM. Photosynthetic pigment protein complexes serve as light-energy harvesting systems and perform photochemical conversion as part of the "early events" of photosynthesis. This chapter outlines how to prepare cross-linking pigment protein complex samples for LC-MS/MS analysis, including identification of the cross-linked species, network analysis in a protein complex, and structural modeling and justification.

Mono- and Intralink Filter (Mi-Filter) To Reduce False Identifications in Cross-Linking Mass Spectrometry Data

Cross-linking mass spectrometry (XL-MS) has become an indispensable tool for the emerging field of systems structural biology over the recent years. However, the confidence in individual protein-protein interactions (PPIs) depends on the correct assessment of individual inter-protein cross-links. In this article, we describe a mono- and intralink filter (mi-filter) that is applicable to any kind of cross-linking data and workflow. It stipulates that only proteins for which at least one monolink or intra-protein cross-link has been identified within a given data set are considered for an inter-protein cross-link and therefore participate in a PPI. We show that this simple and intuitive filter has a dramatic effect on different types of cross-linking data ranging from individual protein complexes over medium-complexity affinity enrichments to proteome-wide cell lysates and significantly reduces the number of false-positive identifications for inter-protein links in all these types of XL-MS data.

Cross-linking reactions in food proteins and proteomic approaches for their detection

Various protein cross-linking reactions leading to molecular polymerization and covalent aggregates have been described in processed foods. They are an undesired side effect of processes designed to reduce bacterial load, extend shelf life, and modify technological properties, as well as being an expected result of treatments designed to modify raw material texture and function. Although the formation of these products is known to affect the sensory and technological properties of foods, the corresponding cross-linking reactions and resulting protein polymers have not yet undergone detailed molecular characterization. This is essential for describing how their generation can be related to food processing conditions and quality parameters. Due to the complex structure of cross-linked species, bottom-up proteomic procedures developed to characterize various amino acid modifications associated with food processing conditions currently offer a limited molecular description of bridged peptide structures. Recent progress in cross-linking mass spectrometry for the topological characterization of protein complexes has facilitated the development of various proteomic methods and bioinformatic tools for unveiling bridged species, which can now also be used for the detailed molecular characterization of polymeric cross-linked products in processed foods. We here examine their benefits and limitations in terms of evaluating cross-linked food proteins and propose future scenarios for application in foodomics. They offer potential for understanding the protein cross-linking formation mechanisms in processed foods, and how the inherent beneficial properties of treated foodstuffs can be preserved or enhanced.

Improved Peptide Backbone Fragmentation Is the Primary Advantage of MS-Cleavable Crosslinkers

Proteome-wide crosslinking mass spectrometry studies have coincided with the advent of mass spectrometry (MS)-cleavable crosslinkers that can reveal the individual masses of the two crosslinked peptides. However, recently, such studies have also been published with noncleavable crosslinkers, suggesting that MS-cleavability is not essential. We therefore examined in detail the advantages and disadvantages of using the commonly used MS-cleavable crosslinker, disuccinimidyl sulfoxide (DSSO). Indeed, DSSO gave rise to signature peptide fragments with a distinct mass difference (doublet) for nearly all identified crosslinked peptides. Surprisingly, we could show that it was not these peptide masses that proved the main advantage of MS cleavability of the crosslinker, but improved peptide backbone fragmentation which reduces the ambiguity of peptide identifications. This also holds true for another commonly used MS-cleavable crosslinker, DSBU. We show furthermore that the more intricate MS3-based data acquisition approaches lack sensitivity and specificity, causing them to be outperformed by the simpler and faster stepped higher-energy collisional dissociation (HCD) method. This understanding will guide future developments and applications of proteome-wide crosslinking mass spectrometry.

Ad hoc learning of peptide fragmentation from mass spectra enables an interpretable detection of phosphorylated and cross-linked peptides

Mass spectrometry-based proteomics provides a holistic snapshot of the entire protein set of living cells on a molecular level. Currently, only a few deep learning approaches exist that involve peptide fragmentation spectra, which represent partial sequence information of proteins. Commonly, these approaches lack the ability to characterize less studied or even unknown patterns in spectra because of their use of explicit domain knowledge. Here, to elevate unrestricted learning from spectra, we introduce ‘ad hoc learning of fragmentation’ (AHLF), a deep learning model that is end-to-end trained on 19.2 million spectra from several phosphoproteomic datasets. AHLF is interpretable, and we show that peak-level feature importance values and pairwise interactions between peaks are in line with corresponding peptide fragments. We demonstrate our approach by detecting post-translational modifications, specifically protein phosphorylation based on only the fragmentation spectrum without a database search. AHLF increases the area under the receiver operating characteristic curve (AUC) by an average of 9.4% on recent phosphoproteomic data compared with the current state of the art on this task. Furthermore, use of AHLF in rescoring search results increases the number of phosphopeptide identifications by a margin of up to 15.1% at a constant false discovery rate. To show the broad applicability of AHLF, we use transfer learning to also detect cross-linked peptides, as used in protein structure analysis, with an AUC of up to 94%.

Energy-resolved mass spectrometry to investigate nucleobase triplexes – a study applied to triplex-forming artificial nucleobases

This paper discloses the use of an energy-resolved mass spectrometric-based approach to assess the stabilities of base triplexes encompassing artificial nucleobases by using variable energy collision-induced dissociation.

Synthesis, LC-MS/MS analysis, and biological evaluation of two vaccine candidates against ticks based on the antigenic P0 peptide from R. sanguineus linked to the p64K carrier protein from Neisseria meningitidis

A peptide from the P0 acidic ribosomal protein (pP0) of ticks conjugated to keyhole limpet hemocyanin from Megathura crenulata has shown to be effective against different tick species when used in host vaccination. Turning this peptide into a commercial anti-tick vaccine will depend on finding the appropriate, technically and economically feasible way to present it to the host immune system. Two conjugates (p64K-Cys¹pP0 and p64K-βAla¹pP0) were synthesized using the p64K carrier protein from Neisseria meningitidis produced in Escherichia coli, the same cross-linking reagent, and two analogues of pP0. The SDS-PAGE analysis of p64K-Cys¹pP0 showed a heterogeneous conjugate compared to p64K-βAla¹pP0 that was detected as a protein band at 91kDa. The pP0/p64K ratio determined by MALDI-MS for p64K-Cys¹pP0 ranged from 1 to 8, being 3-5 the predominant ratio, while in the case of p64K-βAla¹pP0 this ratio was 5-7. Cys¹pP0 was partially linked to 35 out of 39 Lys residues and the N-terminal end, while βAla¹pP0 was mostly linked to the six free cysteine residues, to the N-terminal end, and, in a lesser extent, to Lys residues. The assignment of the conjugation sites and side reactions were based on the identification of type 2 peptides. Rabbit immunizations showed the best anti-pP0 titers and the highest efficacy against Rhipicephalus sanguineus ticks when the p64K-Cys¹pP0 was used as vaccine antigen. The presence of high molecular mass aggregates observed in the SDS-PAGE analysis of p64K-Cys¹pP0 could be responsible for a better immune response against pP0 and consequently for its better efficacy as an anti-tick vaccine.

The linear ubiquitin chain assembly complex (LUBAC) generates heterotypic ubiquitin chains

The linear ubiquitin chain assembly complex (LUBAC) is the only known ubiquitin ligase for linear/Met1-linked ubiquitin chain formation. One of the LUBAC components, heme-oxidized IRP2 ubiquitin ligase 1 (HOIL-1L), was recently shown to catalyse oxyester bond formation between ubiquitin and some substrates. However, oxyester bond formation in the context of LUBAC has not been directly observed. Here, we present the first 3D reconstruction of human LUBAC obtained by electron microscopy and report its generation of heterotypic ubiquitin chains containing linear linkages with oxyester-linked branches. We found that this event depends on HOIL-1L catalytic activity. By cross-linking mass spectrometry showing proximity between the catalytic RING-in-between-RING (RBR) domains, a coordinated ubiquitin relay mechanism between the HOIL-1-interacting protein (HOIP) and HOIL-1L ligases is suggested. In mouse embryonic fibroblasts, these heterotypic chains were induced by TNF, which is reduced in cells expressing an HOIL-1L catalytic inactive mutant. In conclusion, we demonstrate that LUBAC assembles heterotypic ubiquitin chains by the concerted action of HOIP and HOIL-1L.

Retention time prediction using neural networks increases identifications in crosslinking mass spectrometry

Crosslinking mass spectrometry has developed into a robust technique that is increasingly used to investigate the interactomes of organelles and cells. However, the incomplete and noisy information in the mass spectra of crosslinked peptides limits the numbers of protein-protein interactions that can be confidently identified. Here, we leverage chromatographic retention time information to aid the identification of crosslinked peptides from mass spectra. Our Siamese machine learning model xiRT achieves highly accurate retention time predictions of crosslinked peptides in a multi-dimensional separation of crosslinked E. coli lysate. Importantly, supplementing the search engine score with retention time features leads to a substantial increase in protein-protein interactions without affecting confidence. This approach is not limited to cell lysates and multi-dimensional separation but also improves considerably the analysis of crosslinked multiprotein complexes with a single chromatographic dimension. Retention times are a powerful complement to mass spectrometric information to increase the sensitivity of crosslinking mass spectrometry analyses.

pDeepXL: MS/MS Spectrum Prediction for Cross-Linked Peptide Pairs by Deep Learning

In cross-linking mass spectrometry, the identification of cross-linked peptide pairs heavily relies on the ability of a database search engine to measure the similarities between experimental and theoretical MS/MS spectra. However, the lack of accurate ion intensities in theoretical spectra impairs the performance of search engines, in particular, on proteome scales. Here we introduce pDeepXL, a deep neural network to predict MS/MS spectra of cross-linked peptide pairs. To train pDeepXL, we used the transfer-learning technique because it facilitated the training with limited benchmark data of cross-linked peptide pairs. Test results on more than ten data sets showed that pDeepXL accurately predicted the spectra of both noncleavable DSS/BS3/Leiker cross-linked peptide pairs (>80% of predicted spectra have Pearson's r values higher than 0.9) and cleavable DSSO/DSBU cross-linked peptide pairs (>75% of predicted spectra have Pearson's r values higher than 0.9). pDeepXL also achieved the accurate prediction on unseen data sets using an online fine-tuning technique. Lastly, integrating pDeepXL into a database search engine increased the number of identified cross-link spectra by 18% on average.

Identification of Native Cross-Links in Bacillus subtilis Spore Coat Proteins

The resistance properties of the bacterial spores are partially due to spore surface proteins, ∼30% of which are said to form an insoluble protein fraction. Previous research has also identified a group of spore coat proteins affected by spore maturation, which exhibit an increased level of interprotein cross-linking. However, the proteins and the types of cross-links involved, previously proposed based on indirect evidence, have yet to be confirmed experimentally. To obtain more insight into the structural basis of the proteinaceous component of the spore coat, we attempted to identify coat cross-links and the proteins involved using new peptide fractionation and bioinformatic methods. Young (day 1) and matured (day 5) Bacillus subtilis spores of wild-type and transglutaminase mutant strains were digested with formic acid and trypsin, and cross-linked peptides were enriched using strong cation exchange chromatography. The enriched cross-linked peptide fractions were subjected to Fourier-transform ion cyclotron resonance tandem mass spectrometry, and the high-quality fragmentation data obtained were analyzed using two specialized software tools, pLink2 and XiSearch, to identify cross-links. This analysis identified specific disulfide bonds between coat proteins CotE-CotE and CotJA-CotJC, obtained evidence of disulfide bonds in the spore crust proteins CotX, CotY, and CotZ, and identified dityrosine and ε-(γ)-glutamyl-lysine cross-linked coat proteins. The findings in this Letter are the first direct biochemical data on protein cross-linking in the spore coat and the first direct evidence of the cross-linked building blocks of the highly ordered and resistant structure called the spore coat.

Cleavable Cross-Linkers and Mass Spectrometry for the Ultimate Task of Profiling Protein-Protein Interaction Networks in Vivo

Cross-linking mass spectrometry (XL-MS) has matured into a potent tool to identify protein-protein interactions or to uncover protein structures in living cells, tissues, or organelles. The unique ability to investigate the interplay of proteins within their native environment delivers valuable complementary information to other advanced structural biology techniques. This Review gives a comprehensive overview of the current possible applications as well as the remaining limitations of the technique, focusing on cross-linking in highly complex biological systems like cells, organelles, or tissues. Thanks to the commercial availability of most reagents and advances in user-friendly data analysis, validation, and visualization tools, studies using XL-MS can, in theory, now also be utilized by nonexpert laboratories.

Anatomy of a crosslinker

Crosslinking mass spectrometry has become a core technology in structural biology and is expanding its reach towards systems biology. Its appeal lies in a rapid workflow, high sensitivity and the ability to provide data on proteins in complex systems, even in whole cells. The technology depends heavily on crosslinking reagents. The anatomy of crosslinkers can be modular, sometimes comprising combinations of functional groups. These groups are defined by concepts including: reaction selectivity to increase information density, enrichability to improve detection, cleavability to enhance the identification process and isotope-labelling for quantification. Here, we argue that both concepts and functional groups need more thorough experimental evaluation, so that we can show exactly how and where they are useful when applied to crosslinkers. Crosslinker design should be driven by data, not only concepts. We focus on two crosslinker concepts with large consequences for the technology, namely reactive group reaction kinetics and enrichment groups.

Expanding the Depth and Sensitivity of Cross-Link Identification by Differential Ion Mobility Using High-Field Asymmetric Waveform Ion Mobility Spectrometry

In cross-linking mass spectrometry (XL-MS), the depth and sensitivity of cross-link detection is often limited by the low abundance of cross-links compared to non-cross-linked peptides in the digestion mixture. To improve the identification efficiency of cross-links, here, we present a gas-phase separation strategy using high-field asymmetric waveform ion mobility spectrometry (FAIMS) coupled to the Orbitrap Tribrid mass spectrometers. By enabling an additional peptide separation step in the gas phase using the FAIMS device, we increase the number of cross-link identifications by 22% for a medium complex sample and 59% for strong cation exchange-fractionated HEK293T cell lysate in XL-MS experiments using disuccinimidyl sulfoxide (DSSO) cross-linker. When disuccinimidyl suberate (DSS) cross-linker is in use, we are able to boost cross-link identification by 89% for the medium and 100% for the high complex sample compared to the analyses without FAIMS. Furthermore, we show that, for medium complex samples, FAIMS enables the collection of single-shot XL-MS data with a comparable depth to the corresponding sample fractionated by chromatography-based approaches. Altogether, we demonstrate FAIMS is highly beneficial for XL-MS studies by expanding the proteome coverage of cross-links while improving the efficiency and confidence of cross-link identification.

Functional and Mass Spectrometric Evaluation of an Anti-Tick Antigen Based on the P0 Peptide Conjugated to Bm86 Protein

A synthetic 20 amino acid peptide of the ribosomal protein P0 from ticks, when conjugated to keyhole limpet hemocyanin from Megathura crenulata and used as an immunogen against Rhipicephalus microplus and Rhipicephalus sanguineus s.l. species, has shown efficacies of around 90%. There is also experimental evidence of a high efficacy of this conjugate against Amblyomma mixtum and Ixodes ricinus species, which suggest that this antigen could be a good broad-spectrum anti-tick vaccine candidate. In this study, the P0 peptide (pP0) was chemically conjugated to Bm86 as a carrier protein. SDS-PAGE analysis of this conjugate demonstrated that it is highly heterogeneous in size, carrying from 1 to 18 molecules of pP0 per molecule of Bm86. Forty-nine out of the 54 lysine residues and the N-terminal end of Bm86 were found partially linked to pP0 by using LC-MS/MS analysis and the combination of four different softwares. Several post-translational modifications of Bm86 protein were also identified by mass spectrometry. High immunogenicity and efficacy were achieved when dogs and cattle were vaccinated with the pP0-Bm86 conjugate and challenged with R. sanguineus s.l. and R. microplus, respectively. These results encourage the development of this antigen with promising possibilities as an anti-tick vaccine.

Moyamoya disease factor RNF213 is a giant E3 ligase with a dynein-like core and a distinct ubiquitin-transfer mechanism

RNF213 is the major susceptibility factor for Moyamoya disease, a progressive cerebrovascular disorder that often leads to brain stroke in adults and children. Characterization of disease-associated mutations has been complicated by the enormous size of RNF213. Here, we present the cryo-EM structure of mouse RNF213. The structure reveals the intricate fold of the 584 kDa protein, comprising an N-terminal stalk, a dynein-like core with six ATPase units, and a multidomain E3 module. Collaboration with UbcH7, a cysteine-reactive E2, points to an unexplored ubiquitin-transfer mechanism that proceeds in a RING-independent manner. Moreover, we show that pathologic MMD mutations cluster in the composite E3 domain, likely interfering with substrate ubiquitination. In conclusion, the structure of RNF213 uncovers a distinct type of an E3 enzyme, highlighting the growing mechanistic diversity in ubiquitination cascades. Our results also provide the molecular framework for investigating the emerging role of RNF213 in lipid metabolism, hypoxia, and angiogenesis.

Use of Multiple Ion Fragmentation Methods to Identify Protein Cross-Links and Facilitate Comparison of Data Interpretation Algorithms

Multiple ion fragmentation methods involving collision-induced dissociation (CID), higher-energy collisional dissociation (HCD) with regular and very high energy settings, and electron-transfer dissociation with supplementary HCD (EThcD) are implemented to improve the confidence of cross-link identifications. Three different S. cerevisiae proteasome samples cross-linked by diethyl suberthioimidate (DEST) or bis(sulfosuccinimidyl)suberate (BS³) are analyzed. Two approaches are introduced to combine interpretations from the above four methods. Working with cleavable cross-linkers such as DEST, the first approach searches for cross-link diagnostic ions and consistency among the best interpretations derived from all four MS² spectra associated with each precursor ion. Better agreement leads to a more definitive identification. Compatible with both cleavable and noncleavable cross-linkers such as BS³, the second approach multiplies scoring metrics from a number of fragmentation experiments to derive an overall best match. This significantly increases the scoring gap between the target and decoy matches. The validity of cross-links fragmented by HCD alone and identified by Kojak, MeroX, pLink, and Xi was evaluated using multiple fragmentation data. Possible ways to improve the identification credibility are discussed. Data are available via ProteomeXchange with identifier PXD018310.

Improving Peptide Fragmentation for Hydrogen-Deuterium Exchange Mass Spectrometry Using a Time-Dependent Collision Energy Calculator

Hydrogen-deuterium exchange mass spectrometry (HDX-MS) is becoming a popular technique for interrogating biological systems. In recent years, advancements have been made to increase peptide coverage for proteins that resist digestion such as antibodies and membrane proteins. These methods commonly include using alternative digestion enzymes or longer chromatographic gradients, which may be expensive or time-consuming to implement. Here, we recommend an efficient proteomics-based approach to increase peptide confidence and coverage. A major filtering parameter for peptides in HDX is the number of product ions detected; this is a result of the collision energy (CE) applied within the MS. A traditional linear ramp achieves optimal CE for only short periods of time. More product ions will be created and detected if optimal CE can be achieved for a longer period of time. As a result, the coverage, redundancy, and data confidence are all increased. We achieved this by implementing a mobility-dependent CE look up table (LUT) which increases the CE as a function of mobility. We developed a program to calculate the optimal CE for a set of peptides and MS settings based on initial reference samples. We demonstrated the utility of the CE LUT on three protein samples including the soluble phosphorylase B, IgG2, and the membrane-stabilized AcrB. We showed that applying a CE LUT provided 8.5-50% more peptides compared to a linear CE ramp. The results demonstrate that a time-dependent CE LUT is a quick and inexpensive method to increase data confidence and peptide abundance for HDX-MS experiments.

To Cleave or Not To Cleave in XL-MS?

Cross-linking mass spectrometry (XL-MS) is an efficient technique for uncovering structural features and interactions of the in-solution state of the proteins under investigation. Distance constraints obtained by this technique are highly complementary to classical structural biology approaches like X-ray crystallography and cryo-EM and have successfully been leveraged to shed light on protein structures of increasing size and complexity. To accomplish this, small reagents are used that typically incorporate two amine reactive moieties connected by a spacer arm and that can be applied in solution to protein structures of any size. Over the years, many reagents initially developed for different applications were adopted, and others were specifically developed for XL-MS. This has resulted in a vast array of options, making it difficult to make the right choice for specific experiments. Here, we delve into the previous decade of published XL-MS literature to uncover which workflows have been predominantly applied. We focus on application papers as these represent proof that biologically valid results can be extracted. This ignores some more recent approaches that did not have sufficient time to become more widely applied, for which we supply a separate discussion. From our selection, we extract information on the types of samples, cross-linking reagent, prefractionation, instruments, and data analysis, to highlight widely used workflows. All of the results are summarized in an easy-to-use flow chart defined by selection points resulting from our analysis. Although potentially biased by our own experiences, we expect this overview to be useful for novices stepping into this rapidly expanding field.

In Situ Structural Restraints from Cross-Linking Mass Spectrometry in Human Mitochondria

The field of structural biology is increasingly focusing on studying proteins in situ, i.e., in their greater biological context. Cross-linking mass spectrometry (CLMS) is contributing to this effort, typically through the use of mass spectrometry (MS)-cleavable cross-linkers. Here, we apply the popular noncleavable cross-linker disuccinimidyl suberate (DSS) to human mitochondria and identify 5518 distance restraints between protein residues. Each distance restraint on proteins or their interactions provides structural information within mitochondria. Comparing these restraints to protein data bank (PDB)-deposited structures and comparative models reveals novel protein conformations. Our data suggest, among others, substrates and protein flexibility of mitochondrial heat shock proteins. Through this study, we bring forward two central points for the progression of CLMS towards large-scale in situ structural biology: First, clustered conflicts of cross-link data reveal in situ protein conformation states in contrast to error-rich individual conflicts. Second, noncleavable cross-linkers are compatible with proteome-wide studies.

Assessment of chemical-crosslink-assisted protein structure modeling in CASP13

With the advance of experimental procedures obtaining chemical crosslinking information is becoming a fast and routine practice. Information on crosslinks can greatly enhance the accuracy of protein structure modeling. Here, we review the current state of the art in modeling protein structures with the assistance of experimentally determined chemical crosslinks within the framework of the 13th meeting of Critical Assessment of Structure Prediction approaches. This largest-to-date blind assessment reveals benefits of using data assistance in difficult to model protein structure prediction cases. However, in a broader context, it also suggests that with the unprecedented advance in accuracy to predict contacts in recent years, experimental crosslinks will be useful only if their specificity and accuracy further improved and they are better integrated into computational workflows.

Structure of the Fanconi anaemia monoubiquitin ligase complex

The Fanconi anaemia (FA) pathway repairs DNA damage caused by endogenous and chemotherapy-induced DNA crosslinks, and responds to replication stress1,2. Genetic inactivation of this pathway by mutation of genes encoding FA complementation group (FANC) proteins impairs development, prevents blood production and promotes cancer1,3. The key molecular step in the FA pathway is the monoubiquitination of a pseudosymmetric heterodimer of FANCD2-FANCI4,5 by the FA core complex-a megadalton multiprotein E3 ubiquitin ligase6,7. Monoubiquitinated FANCD2 then recruits additional protein factors to remove the DNA crosslink or to stabilize the stalled replication fork. A molecular structure of the FA core complex would explain how it acts to maintain genome stability. Here we reconstituted an active, recombinant FA core complex, and used cryo-electron microscopy and mass spectrometry to determine its structure. The FA core complex comprises two central dimers of the FANCB and FA-associated protein of 100 kDa (FAAP100) subunits, flanked by two copies of the RING finger subunit, FANCL. These two heterotrimers act as a scaffold to assemble the remaining five subunits, resulting in an extended asymmetric structure. Destabilization of the scaffold would disrupt the entire complex, resulting in a non-functional FA pathway. Thus, the structure provides a mechanistic basis for the low numbers of patients with mutations in FANCB, FANCL and FAAP100. Despite a lack of sequence homology, FANCB and FAAP100 adopt similar structures. The two FANCL subunits are in different conformations at opposite ends of the complex, suggesting that each FANCL has a distinct role. This structural and functional asymmetry of dimeric RING finger domains may be a general feature of E3 ligases. The cryo-electron microscopy structure of the FA core complex provides a foundation for a detailed understanding of its E3 ubiquitin ligase activity and DNA interstrand crosslink repair.

An integrated workflow for crosslinking mass spectrometry

We present a concise workflow to enhance the mass spectrometric detection of crosslinked peptides by introducing sequential digestion and the crosslink identification software xiSEARCH. Sequential digestion enhances peptide detection by selective shortening of long tryptic peptides. We demonstrate our simple 12-fraction protocol for crosslinked multi-protein complexes and cell lysates, quantitative analysis, and high-density crosslinking, without requiring specific crosslinker features. This overall approach reveals dynamic protein-protein interaction sites, which are accessible, have fundamental functional relevance and are therefore ideally suited for the development of small molecule inhibitors.

A high-speed search engine pLink 2 with systematic evaluation for proteome-scale identification of cross-linked peptides

We describe pLink 2, a search engine with higher speed and reliability for proteome-scale identification of cross-linked peptides. With a two-stage open search strategy facilitated by fragment indexing, pLink 2 is ~40 times faster than pLink 1 and 3~10 times faster than Kojak. Furthermore, using simulated datasets, synthetic datasets, ¹⁵N metabolically labeled datasets, and entrapment databases, four analysis methods were designed to evaluate the credibility of ten state-of-the-art search engines. This systematic evaluation shows that pLink 2 outperforms these methods in precision and sensitivity, especially at proteome scales. Lastly, re-analysis of four published proteome-scale cross-linking datasets with pLink 2 required only a fraction of the time used by pLink 1, with up to 27% more cross-linked residue pairs identified. pLink 2 is therefore an efficient and reliable tool for cross-linking mass spectrometry analysis, and the systematic evaluation methods described here will be useful for future software development.

The identification of cross-linked peptides at a proteome scale for interactome analyses represents a complex challenge. Here the authors report an efficient and reliable search engine pLink 2 for proteome-scale cross-linking mass spectrometry analyses, and demonstrate how to systematically evaluate the credibility of search engines.

Quantitative cross-linking/mass spectrometry to elucidate structural changes in proteins and their complexes

Quantitative cross-linking/mass spectrometry (QCLMS/QXL-MS) probes structural changes of proteins in solution. This method has revealed induced conformational changes, composition shifts in conformational ensembles and changes in protein interactions. It illuminates different structural states of proteins or protein complexes by comparing which residue pairs can be cross-linked in these states. Cross-links provide information about structural changes that may be inaccessible by alternative technologies. Small local conformational changes affect relative abundances of nearby cross-links, whereas larger conformational changes cause new cross-links to be formed. Distinguishing between minor and major changes requires a robust analysis based on carefully selected replicates and, when using isotope-labeled cross-linkers, replicated analysis with a permutated isotope-labeling scheme. A label-free workflow allows for application of a wide range of cross-linking chemistries and enables parallel comparison of multiple conformations. In this protocol, we demonstrate both label-free and isotope-labeled cross-linker-based workflows using the cross-linker bis(sulfosuccinimidyl)suberate (BS3). The software XiSearch, developed by our group, is used to identify cross-linked residue pairs, although the workflow is not limited to this search software. The open-access software Skyline is used for automated quantitation. Note that additional manual correction greatly enhances quantitation accuracy. The protocol has been applied to purified multi-protein complexes but is not necessarily limited to that level of sample complexity. Optimizing the cross-linker/protein ratio and fractionating peptides increase the data density of quantified cross-links, and thus the resolution of QCLMS. The entire procedure takes ~1-3 weeks.

Defining the RNA interactome by total RNA-associated protein purification

The RNA binding proteome (RBPome) was previously investigated using UV crosslinking and purification of poly(A)-associated proteins. However, most cellular transcripts are not polyadenylated. We therefore developed total RNA-associated protein purification (TRAPP) based on 254 nm UV crosslinking and purification of all RNA-protein complexes using silica beads. In a variant approach (PAR-TRAPP), RNAs were labelled with 4-thiouracil prior to 350 nm crosslinking. PAR-TRAPP in yeast identified hundreds of RNA binding proteins, strongly enriched for canonical RBPs. In comparison, TRAPP identified many more proteins not expected to bind RNA, and this correlated strongly with protein abundance. Comparing TRAPP in yeast and E. coli showed apparent conservation of RNA binding by metabolic enzymes. Illustrating the value of total RBP purification, we discovered that the glycolytic enzyme enolase interacts with tRNAs. Exploiting PAR-TRAPP to determine the effects of brief exposure to weak acid stress revealed specific changes in late 60S ribosome biogenesis. Furthermore, we identified the precise sites of crosslinking for hundreds of RNA-peptide conjugates, using iTRAPP, providing insights into potential regulation. We conclude that TRAPP is a widely applicable tool for RBPome characterization.

Sequential Digestion with Trypsin and Elastase in Cross-Linking Mass Spectrometry

Cross-linking mass spectrometry has become an important approach for studying protein structures and protein-protein interactions. The amino acid compositions of some protein regions impede the detection of cross-linked residues, although it would yield invaluable information for protein modeling. Here, we report on a sequential-digestion strategy with trypsin and elastase to penetrate regions with a low density of trypsin-cleavage sites. We exploited intrinsic substrate-recognition properties of elastase to specifically target larger tryptic peptides. Our application of this protocol to the TAF4-12 complex allowed us to identify cross-links in previously inaccessible regions.

A folded conformation of MukBEF and cohesin

Structural maintenance of chromosomes (SMC)-kleisin complexes organize chromosomal DNAs in all domains of life, with key roles in chromosome segregation, DNA repair and regulation of gene expression. They function through the entrapment and active translocation of DNA, but the underlying conformational changes are largely unclear. Using structural biology, mass spectrometry and cross-linking, we investigated the architecture of two evolutionarily distant SMC-kleisin complexes: MukBEF from Escherichia coli, and cohesin from Saccharomyces cerevisiae. We show that both contain a dynamic coiled-coil discontinuity, the elbow, near the middle of their arms that permits a folded conformation. Bending at the elbow brings into proximity the hinge dimerization domain and the head-kleisin module, situated at opposite ends of the arms. Our findings favour SMC activity models that include a large conformational change in the arms, such as a relative movement between DNA contact sites during DNA loading and translocation.

Optimization Workflow for the Analysis of Cross-Linked Peptides Using a Quadrupole Time-of-Flight Mass Spectrometer

Cross-linking mass spectrometry is an emerging structural biology technique. Almost exclusively, the analyzer of choice for such an experiment has been the Orbitrap. We present an optimized protocol for the use of a Synapt G2-Si for the analysis of cross-linked peptides. We first tested six different energy ramps and analyzed the fragmentation behavior of cross-linked peptides identified by xQuest. By combining the most successful energy ramps, cross-link yield can be increased by up to 40%. When compared to previously published Orbitrap data, the Synapt G2-Si also offers improved fragmentation of the β peptide. In order to improve cross-link quality control we have also developed ValidateXL, a programmatic solution that works with existing cross-linking software to improve cross-link quality control.

Cross-linking mass spectrometry: methods and applications in structural, molecular and systems biology

Over the past decade, cross-linking mass spectrometry (CLMS) has developed into a robust and flexible tool that provides medium-resolution structural information. CLMS data provide a measure of the proximity of amino acid residues and thus offer information on the folds of proteins and the topology of their complexes. Here, we highlight notable successes of this technique as well as common pipelines. Novel CLMS applications, such as in-cell cross-linking, probing conformational changes and tertiary-structure determination, are now beginning to make contributions to molecular biology and the emerging fields of structural systems biology and interactomics.

Protein Dynamics in Solution by Quantitative Crosslinking/Mass Spectrometry

The dynamics of protein structures and their interactions are responsible for many cellular processes. The rearrangements and interactions of proteins, which are often transient, occur in solution and may require a biological environment that is difficult to maintain in traditional structural biological approaches. Quantitative crosslinking/mass spectrometry (QCLMS) has emerged as an excellent method to fill this gap. Numerous recent applications of the technique have demonstrated that protein dynamics can now be studied in solution at sufficient resolution to gain valuable biological insights, suggesting that extending these investigations to native environments is possible. These breakthroughs have been based on the maturation of CLMS at large, and its recent fusion with quantitative proteomics. We provide here an overview of the current state of the technique, the available workflows and their applications, and remaining challenges.

In-solution dynamics of protein structures and their interactions can be studied by QCLMS.

Successful applications of QCLMS provide insights into multiple different biological processes.

Recent advances in QCLMS allow analyses in the context of native cellular environments, including living cells.

Alternative workflows allow researchers to tailor the analysis to their biological question.

Progress in data processing now offers this technique to researchers with limited initial expertise in crosslinking and quantitative proteomics.

Synthesis of CID-cleavable protein crosslinking agents containing quaternary amines for structural mass spectrometry

Two novel cyclic quaternary amine crosslinking probes are synthesized for structural mass spectrometry of protein complexes in solution and for analysis of protein interactions in organellar and whole cell extracts. Each exhibits high aqueous solubility, excellent protein crosslinking efficiencies, low collision induced dissociation (CID) energy fragmentation efficiencies, high stoichiometries of reaction, increased charges of crosslinked peptide ions, and maintenance of overall surface charge balance of crosslinked proteins.

Small angle X-ray scattering and cross-linking for data assisted protein structure prediction in CASP 12 with prospects for improved accuracy

Experimental data offers empowering constraints for structure prediction. These constraints can be used to filter equivalently scored models or more powerfully within optimization functions toward prediction. In CASP12, Small Angle X-ray Scattering (SAXS) and Cross-Linking Mass Spectrometry (CLMS) data, measured on an exemplary set of novel fold targets, were provided to the CASP community of protein structure predictors. As solution-based techniques, SAXS and CLMS can efficiently measure states of the full-length sequence in its native solution conformation and assembly. However, this experimental data did not substantially improve prediction accuracy judged by fits to crystallographic models. One issue, beyond intrinsic limitations of the algorithms, was a disconnect between crystal structures and solution-based measurements. Our analyses show that many targets had substantial percentages of disordered regions (up to 40%) or were multimeric or both. Thus, solution measurements of flexibility and assembly support variations that may confound prediction algorithms trained on crystallographic data and expecting globular fully-folded monomeric proteins. Here, we consider the CLMS and SAXS data collected, the information in these solution measurements, and the challenges in incorporating them into computational prediction. As improvement opportunities were only partly realized in CASP12, we provide guidance on how data from the full-length biological unit and the solution state can better aid prediction of the folded monomer or subunit. We furthermore describe strategic integrations of solution measurements with computational prediction programs with the aim of substantially improving foundational knowledge and the accuracy of computational algorithms for biologically-relevant structure predictions for proteins in solution.

Protein Tertiary Structure by Crosslinking/Mass Spectrometry

Observing the structures of proteins within the cell and tracking structural changes under different cellular conditions are the ultimate challenges for structural biology. This, however, requires an experimental technique that can generate sufficient data for structure determination and is applicable in the native environment of proteins. Crosslinking/mass spectrometry (CLMS) and protein structure determination have recently advanced to meet these requirements and crosslinking-driven de novo structure determination in native environments is now possible. In this opinion article, we highlight recent successes in the field of CLMS with protein structure modeling and challenges it still holds.

The earliest structural studies on proteins using crosslinking/mass spectrometry aimed to elucidate their tertiary three-dimensional structure.

Tertiary structure modeling using crosslinking fell out of favor for almost two decades because crosslink data were not informative to aid structure modeling.

Two game-changing trends emerged: using short-range crosslinkers that capture relevant modeling information and high-density crosslinking.

High-density crosslinking uses unspecific crosslinkers to dramatically increase crosslink numbers.

In addition, computational structure modeling methods made significant progress in exploiting CLMS data.

The combination of high-density crosslinking and computational structure modeling enables the elucidation of tertiary protein structure in native environments.

This sidesteps the key limitation of today’s structure determination methods, which are unable (except for a few, specialized methods) to probe the structure of proteins in cell lysates or even intact cells.

Structural Investigation of Proteins and Protein Complexes by Chemical Cross-Linking/Mass Spectrometry

During the last two decades, cross-linking combined with mass spectrometry (MS) has evolved as a valuable tool to gain structural insights into proteins and protein assemblies. Structural information is obtained by introducing covalent connections between amino acids that are in spatial proximity in proteins and protein complexes. The distance constraints imposed by the cross-linking reagent provide information on the three-dimensional arrangement of the covalently connected amino acid residues and serve as basis for de-novo or homology modeling approaches. As cross-linking/MS allows investigating protein 3D-structures and protein-protein interactions not only in-vitro, but also in-vivo, it is especially appealing for studying protein systems in their native environment. In this chapter, we describe the principles of cross-linking/MS and illustrate its value for investigating protein 3D-structures and for unraveling protein interaction networks.

Identification of peptide-binding sites within BSA using rapid, laser-induced covalent cross-linking combined with high-performance mass spectrometry

We are developing a rapid, time-resolved method using laser-activated cross-linking to capture protein-peptide interactions as a means to interrogate the interaction of serum proteins as delivery systems for peptides and other molecules. A model system was established to investigate the interactions between bovine serum albumin (BSA) and 2 peptides, the tridecapeptide budding-yeast mating pheromone (α-factor) and the decapeptide human gonadotropin-releasing hormone (GnRH). Cross-linking of α-factor, using a biotinylated, photoactivatable p-benzoyl-L-phenylalanine (Bpa)-modified analog, was energy-dependent and achieved within seconds of laser irradiation. Protein blotting with an avidin probe was used to detect biotinylated species in the BSA-peptide complex. The cross-linked complex was trypsinized and then interrogated with nano-LC-MS/MS to identify the peptide cross-links. Cross-linking was greatly facilitated by Bpa in the peptide, but some cross-linking occurred at higher laser powers and high concentrations of a non-Bpa-modified α-factor. This was supported by experiments using GnRH, a peptide with sequence homology to α-factor, which was likewise found to be cross-linked to BSA by laser irradiation. Analysis of peptides in the mass spectra showed that the binding site for both α-factor and GnRH was in the BSA pocket defined previously as the site for fatty acid binding. This model system validates the use of laser-activation to facilitate cross-linking of Bpa-containing molecules to proteins. The rapid cross-linking procedure and high performance of MS/MS to identify cross-links provides a method to interrogate protein-peptide interactions in a living cell in a time-resolved manner.

Protein-protein cross-linking and human health: the challenge of elucidating with mass spectrometry

INTRODUCTION

In several biomedical research fields, the cross-linking of peptides and proteins has an important impact on health and wellbeing. It is therefore of crucial importance to study this class of post-translational modifications in detail. The huge potential of mass spectrometric technologies in the mapping of these protein-protein cross-links is however overshadowed by the challenges that the field has to overcome. Areas covered: In this review, we summarize the different pitfalls and challenges that the protein-protein cross-linking field is confronted with when using mass spectrometry approaches. We additionally focus on native disulfide bridges as an example and provide some examples of cross-links that are important in the biomedical field. Expert commentary: The current flow of methodological improvements, mainly from the chemical cross-linking field, has delivered a significant contribution to deciphering native and insult-induced cross-links. Although an automated data analysis of proteome-wide peptide cross-linking is currently only possible in chemical cross-linking experiments, the field is well on the way towards a more automated analysis of native and insult-induced cross-links in raw mass spectrometry data that will boost its potential in biomedical applications.

Capturing protein communities by structural proteomics in a thermophilic eukaryote

The arrangement of proteins into complexes is a key organizational principle for many cellular functions. Although the topology of many complexes has been systematically analyzed in isolation, their molecular sociology in situ remains elusive. Here, we show that crude cellular extracts of a eukaryotic thermophile, Chaetomium thermophilum, retain basic principles of cellular organization. Using a structural proteomics approach, we simultaneously characterized the abundance, interactions, and structure of a third of the C. thermophilum proteome within these extracts. We identified 27 distinct protein communities that include 108 interconnected complexes, which dynamically associate with each other and functionally benefit from being in close proximity in the cell. Furthermore, we investigated the structure of fatty acid synthase within these extracts by cryoEM and this revealed multiple, flexible states of the enzyme in adaptation to its association with other complexes, thus exemplifying the need for in situ studies. As the components of the captured protein communities are known—at both the protein and complex levels—this study constitutes another step forward toward a molecular understanding of subcellular organization.

CLMSVault: A Software Suite for Protein Cross-Linking Mass-Spectrometry Data Analysis and Visualization

Protein cross-linking mass spectrometry (CL-MS) enables the sensitive detection of protein interactions and the inference of protein complex topology. The detection of chemical cross-links between protein residues can identify intra- and interprotein contact sites or provide physical constraints for molecular modeling of protein structure. Recent innovations in cross-linker design, sample preparation, mass spectrometry, and software tools have significantly improved CL-MS approaches. Although a number of algorithms now exist for the identification of cross-linked peptides from mass spectral data, a dearth of user-friendly analysis tools represent a practical bottleneck to the broad adoption of the approach. To facilitate the analysis of CL-MS data, we developed CLMSVault, a software suite designed to leverage existing CL-MS algorithms and provide intuitive and flexible tools for cross-platform data interpretation. CLMSVault stores and combines complementary information obtained from different cross-linkers and search algorithms. CLMSVault provides filtering, comparison, and visualization tools to support CL-MS analyses and includes a workflow for label-free quantification of cross-linked peptides. An embedded 3D viewer enables the visualization of quantitative data and the mapping of cross-linked sites onto PDB structural models. We demonstrate the application of CLMSVault for the analysis of a noncovalent Cdc34-ubiquitin protein complex cross-linked under different conditions. CLMSVault is open-source software (available at https://gitlab.com/courcelm/clmsvault.git ), and a live demo is available at http://democlmsvault.tyerslab.com/ .