Response surface methodology approach for the optimization of tartrazine removal by heterogeneous photo-Fenton process using mesostructured Fe2O3-suppoted ZSM-5 prepared by chitin-templating

Iron-bearing mining reject as an alternative and effective catalyst for photo-Fenton oxidation of phenol in water

In this work, iron-bearing mining reject was employed as an alternative and potential low-cost catalyst to degrade phenol in water by photo-Fenton strategy. Various techniques, including SEM-EDS, BET, FTIR, and XRD, were applied to evaluate the material's properties. Process parameters such as hydrogen peroxide concentration, catalyst dosage, and pH were studied to determine the optimum reaction conditions ([catalyst] = 0.75 g L-1, [H2O2] = 7.5 mM, and pH = 3). Phenol degradation and mineralization efficiencies at 180 and 300 min were 96.5 and 78%, respectively. These satisfactory results can be associated with the iron amount present in the waste sample. Furthermore, the material showed high catalytic activity and negligible iron leaching even after the fourth reuse cycle. The degradation behavior of phenol in water was well represented by a kinetic model based on the Fermi function. The iron-bearing mining reject can be considered a potential photo-Fenton catalyst for phenol degradation in wastewater.

Applying bottom ash as an alternative Fenton catalyst for effective removal of phenol from aqueous environment

In this study, coal bottom ash from a thermoelectric plant was tested as an alternative Fenton catalyst for phenol degradation in water. The effect of operating parameters such as initial pH, catalyst dosage and H2O2 concentration were evaluated. The characterization results indicated that the material has a mesoporous structure, with active species (Fe) well distributed on its surface. Under the optimal reaction conditions (6 mM H2O2, 1 g L-1 of catalyst and pH = 3), 98.7% phenol degradation efficiency was achieved in 60 min, as well as 71.6% TOC removal after 150 min. Hydroxyl radical was identified as the main oxidizing agent involved on the cleavage of the phenol molecule. After four consecutive reuse cycles, phenol degradation efficiency was around 80%, indicating good reusability and stability of the catalyst. Therefore, the obtained results demonstrated that the bottom ash presents remarkable activity for application in the Fenton reaction towards phenol degradation.

Augmented degradation of dyed organic pollutant using Fe2O3 supported on char formed from poultry slaughterhouse waste

In this work, a novel support for an iron-based catalyst was prepared and employed for Ponceau 4R degradation by photo-Fenton reaction. To this, poultry waste was used for producing char, which was subsequently used to prepare the Fe2O3/Char composite. Process parameters, including catalyst dosage, pH, and hydrogen peroxide concentration, were investigated. The characterization analysis indicated that the textural properties of the composite were improved after impregnation with Fe2O3. The composite exhibited excellent catalytic activity, achieving a decolorization efficiency of 97% at 45 min and 81.06% organic carbon removal at 300 min. In addition, the material showed acceptable performance after four consecutive cycles. Furthermore, a scavenger test was performed to investigate the major reactive species involved in the Ponceau 4R oxidation, and a plausible mechanism for the respective reaction was projected. Therefore, the results of this research demonstrate that this material can be used as a potential catalyst for the abatement of dyed molecules from wastewater.

Synthesis of the MnO2-Fe3O4 catalyst support on amorphous silica: a new Fenton's reagent in the degradation of the reactive blue-19 in aqueous solution

In this study, a new Fenton's reagent was synthesized via two steps: (1) the dispersed Fe₃O₄ nanoparticles were immobilized on the surface of the SiO₂ carrier via the precipitation process, and (2) the MnO₂ nano-sheets were coated on the surface of Fe₃O₄/SiO₂ via hydrothermal method. The SiO₂ carrier has been synthetically utilized from Vietnamese rice husk. The successful formation of the MnO₂-Fe₃O₄/SiO₂ composite has been analytically characterized by the XRD (X-ray diffraction), SEM (scanning electron microscope), EDS (energy dispersive spectrometry)-mapping, FTIR (Fourier transform infrared), S_BET (Brunauer-Emmett-Teller specific surface area), and adsorption/desorption isotherms. This Fenton system was employed to catalyze degradation process of the reactive-blue 19 (RB19) with approximately 100% of removal efficiency after 25 min at the optimal condition of 0.15 g/100 mL of catalyst dosage, pH = 3, and the H₂O₂ concentration of 3 mL/100 mL. Moreover, the catalyst could be reused at least six times with high catalytic activity that was more than 90%. In conclusion, this study showed that the mesoporous MnO₂-Fe₃O₄/SiO₂ composite has a great potential for the removal application of dyes from wastewater, and the application of Vietnam rice husk in environmental treatment was developed.

Fenton Reaction–Unique but Still Mysterious

This study is devoted to the Fenton reaction, which, despite hundreds of reports in a number of scientific journals, provides opportunities for further investigation of its use as a method of advanced oxidation of organic macro- and micropollutants in its diverse variations and hybrid systems. It transpires that, for example, the choice of the concentrations and ratios of basic chemical substances, i.e., hydrogen peroxide and catalysts based on the Fe2+ ion or other transition metals in homogeneous and heterogeneous arrangements for reactions with various pollutants, is for now the result of the experimental determination of rather randomly selected quantities, requiring further optimizations. The research to date also shows the indispensability of the Fenton reaction related to environmental issues, as it represents the pillar of all advanced oxidation processes, regarding the idea of oxidative hydroxide radicals. This study tries to summarize not only the current knowledge of the Fenton process and identify its advantages, but also the problems that need to be solved. Based on these findings, we identified the necessary steps affecting its further development that need to be resolved and should be the focus of further research related to the Fenton process.

Recent advances in biopolymer-based advanced oxidation processes for dye removal applications: A review

Over the past few years, synthetic dye-contaminated wastewater has attracted considerable global attention due to the low biodegradability and the ability of organic dyes to persist and remain toxic, causing numerous health and environmental concerns. As a result of the recalcitrant nature of those complex organic dyes, the remediation of wastewater using conventional wastewater treatment techniques is becoming increasingly challenging. In recent years, advanced oxidation processes (AOPs) have emerged as a potential alternative to treat organic dyestuffs discharged from industries. The most widely employed AOPs include photocatalysis, ozonation, Fenton oxidation, electrochemical oxidation, catalytic heterogeneous oxidation, and ultrasound irradiation. These processes involve the generation of highly reactive radicals to oxidize organic dyes into innocuous minerals. However, many conventional AOPs suffer from several setbacks, including the high cost, high consumption of reagents and substrates, self-agglomeration of catalysts, limited reusability, and the requirement of light, ultrasound, or electricity. Therefore, there has been significant interest in improving the performance of conventional AOPs using biopolymers and heterogeneous catalysts such as metal oxide nanoparticles (MONPs). Biopolymers have been widely considered in developing green, sustainable, eco-friendly, and low-cost AOP-based dye removal technologies. They inherit intriguing properties like biodegradability, renewability, nontoxicity, relative abundance, and sorption. In addition, the immobilization of catalysts on biopolymer supports has been proven to possess excellent catalytic activity and turnover numbers. The current review provides comprehensive coverage of different AOPs and how efficiently biopolymers, including cellulose, chitin, chitosan, alginate, gelatin, guar gum, keratin, silk fibroin, zein, albumin, lignin, and starch, have been integrated with heterogeneous AOPs in dye removal applications. This review also discusses the general degradation mechanisms of AOPs, applications of biopolymers in AOPs and the roles of biopolymers in AOPs-based dye removal processes. Furthermore, key challenges and future perspectives of biopolymer-based AOPs have also been highlighted.

Enhanced artificial intelligence for electrochemical sensors in monitoring and removing of azo dyes and food colorant substances

It is necessary to determine whether synthetic dyes are present in food since their excessive use has detrimental effects on human health. For the simultaneous assessment of tartrazine and Patent Blue V, a novel electrochemical sensing platform was developed. As a result, two artificial azo colorants (Tartrazine and Patent Blue V) with toxic azo groups (-NN-) and other carcinogenic aromatic ring structures were examined. With a low limit of detection of 0.06 μM, a broad linear concentration range 0.09μM to 950μM, and a respectable recovery, scanning electron microscopy (SEM) was able to reveal the excellent sensing performance of the suggested electrode for patent blue V. The electrochemical performance of an electrode can be characterized using cyclic and differential pulse voltammetry, and electrochemical impedance spectroscopy. Moreover, the classification model was created by applying binary classification assessment using enhanced artificial intelligence comprises of support vector machine (SVM) and Genetic Algorithm (GA), respectively, a support vector machine and a genetic algorithm, which was then validated using the 50 dyes test set. The best binary logistic regression model has an accuracy of 83.2% and 81.1%, respectively, while the best SVM model has an accuracy of 90.3% for the training group of samples and 81.1% for the test group (RMSE = 0.644, R2 = 0.873, C = 205.41, and = 5.992). According to the findings, Cu-BTC MOF (copper (II)-benzene-1,3,5-tricarboxylate) has a crystal structure and is tightly packed with hierarchically porous nanomaterials, with each particle's edge measuring between 20 and 37 nm. The suggested electrochemical sensor's analytical performance is suitable for foods like jellies, condiments, soft drinks and candies.

Remarkable sunlight-driven photocatalytic performance of Ag-doped ZnO nanoparticles prepared by green synthesis for degradation of emerging pollutants in water

In this work, Ag-doped ZnO nanoparticles (NPs) were synthesized by a simple green method using a toxic agent-free route for photocatalytic purposes, toward methylene blue (MB) removal in water under sunlight irradiation. The effects of operating parameters, such as catalyst dosage, dye concentration, and pH, on the MB removal efficiency, were investigated. The presence of Ag on the ZnO structure resulted in superior catalytic activity compared to the pure ZnO sample. High removal efficiency for MB, corresponding to 95%, was obtained in 30 min of reaction time only, using Ag-doped ZnO NPs. This result can be related to its smaller bandgap energy (1.92 eV) when compared to the ZnO sample (2.85 eV). The material presented a satisfactory level of reusability after three consecutive cycles. In addition, a reaction mechanism for MB photodegradation onto Ag-doped ZnO NPs under sunlight irradiation was suggested. Overall, the catalyst prepared via the green route in this work exhibited excellent photocatalytic activity under sunlight for MB degradation in an aqueous solution.

Recent Advances in Biopolymer-Based Dye Removal Technologies

Synthetic dyes have become an integral part of many industries such as textiles, tannin and even food and pharmaceuticals. Industrial dye effluents from various dye utilizing industries are considered harmful to the environment and human health due to their intense color, toxicity and carcinogenic nature. To mitigate environmental and public health related issues, different techniques of dye remediation have been widely investigated. However, efficient and cost-effective methods of dye removal have not been fully established yet. This paper highlights and presents a review of recent literature on the utilization of the most widely available biopolymers, specifically, cellulose, chitin and chitosan-based products for dye removal. The focus has been limited to the three most widely explored technologies: adsorption, advanced oxidation processes and membrane filtration. Due to their high efficiency in dye removal coupled with environmental benignity, scalability, low cost and non-toxicity, biopolymer-based dye removal technologies have the potential to become sustainable alternatives for the remediation of industrial dye effluents as well as contaminated water bodies.

Transforming pods of the species Capparis flexuosa into effective biosorbent to remove blue methylene and bright blue in discontinuous and continuous systems

This study investigates, for the first time, the applicability of seed pods from Capparis flexuosa as an alternative biosorbent to remove methylene blue and bright blue from aqueous medium using continuous and batch systems. The biosorbent was characterized by different techniques, whose particles presented rough surface and large pores and functional groups existing on its surface. In the batch system, an adsorptive capacity of 96.40 mg g^-1 and 80% of methylene blue removal was reached with 0.9 g L^-1 of adsorbent at pH 10, whereas 109.7 mg g^-1 and 83% of bright blue removal was observed using 0.8 g L^-1 of adsorbent at pH 2.0. The Elovich model adjusted the experimental data satisfactorily for both dyes. Tóth model for the MB best described the equilibrium data, and the Langmuir model for the bright blue both favored by the increase of temperature and dyes' concentration. The maximum capacities obtained were 280.78 mg g^-1 and 342.85 mg g^-1 for methylene blue and bright blue, respectively. The thermodynamic parameters indicated spontaneous processes, with endothermic behavior for both dyes. The fixed adsorption experiments using Capparis flexuosa seed pods showed adsorptive capacities of 158.65 and 205.81 mg g^-1 for the methylene blue and bright blue, respectively. The overall results indicated that the pods of the Capparis flexuosa could be an ecological, effective, and economical alternative in the removal of dyes for both continuous and batch systems.

State of the Art and Perspectives of Hierarchical Zeolites: Practical Overview of Synthesis Methods and Use in Catalysis

Microporous zeolites have proven to be of great importance in many chemical processes. Yet, they often suffer from diffusion limitations causing inefficient use of the available catalytically active sites. To address this problem, hierarchical zeolites have been developed, which extensively improve the catalytic performance. There is a multitude of recent literature describing synthesis of and catalysis with these hierarchical zeolites. This review attempts to organize and overview this literature (of the last 5 years), with emphasis on the most important advances with regard to synthesis and application of such zeolites. Special attention is paid to the most common and important 10- and 12-membered ring zeolites (MTT, TON, FER, MFI, MOR, FAU, and *BEA). In contrast to previous reviews, the research per zeolite topology is brought together and discussed here. This allows the reader to instantly find the best synthesis method in accordance to the desired zeolite properties. A summarizing graph is made available to enable the reader to select suitable synthesis procedures based on zeolite acidity and mesoporosity, the two most important tunable properties.

A low-cost solvent-free method to synthesize α-Fe2O3 nanoparticles with applications to degrade methyl orange in photo-fenton system

Hematite nanoparticles (α-Fe₂O₃ NPs) were successfully synthesized by a low-cost solvent-free reaction using Ferrous sulfate waste (FeSO₄·7H₂O) and pyrite (FeS₂) as raw materials and employed for the decolorization of Methyl Orange by the photo-Fenton system. The properties of α-Fe₂O₃ NPs before and after photo-Fenton reaction were characterized by X-ray powder diffraction (XRD), Field emission scanning electron microscopy (FESEM), Fourier transform infrared (FT-IR) spectrum and X-ray photoelectron spectroscopy (XPS), and the optical properties of α-Fe₂O₃ NPs were analyzed by UV-vis diffuse reflectance spectra (UV-vis DRS) and Photoluminescence (PL) spectra. The analytic results showed that the as-formed samples having an average diameter of ~50 nm exhibit pure phase hematite with sphere structure. Besides, little differences were found by comparing the characterization data of the particles before and after the photo-Fenton reaction, indicating that the photo-Fenton reaction was carried out in solution rather than on the surface of α-Fe₂O₃ NPs. A 2⁴ central composite design (CCD) coupled with response surface methodology (RSM) was applied to evaluate and optimize the important variables. A significant quadratic model (P-value<0.0001, R² = 0.9664) was derived using an analysis of variance (ANOVA), which was adequate to perform the process variables optimization. The optimal process conditions were performed to be 395 nm of the light wavelength, pH 3.0, 5 mmol/L H₂O₂ and 1 g/L α-Fe₂O₃, and the decolorization efficiency of methyl orange was 99.55% at 4 min.