Influence of Ionic Surfactants on the Properties of Nanoemulsions Emulsified by Nonionic Surfactants Span 80/Tween 80

Interfacial crystallized oleogel emulsion with improved freeze-thaw stability and tribological properties: Influence of cooling rate

In this study, the influence of cooling rate on the freeze-thaw stability, rheological and tribological properties of interfacial crystalized oleogel emulsion was investigated. Results showed that slower cooling rate could promote formation of larger crystals and stronger network in oleogels. Additionally, oleogel emulsions showed higher freeze-thaw stability than those stabilized solely by emulsifiers. The slower cooling rate resulted in larger crystals adsorbed at the droplet surface. This led to greater steric hindrance that prevented the migration of oil droplets with higher resistance to disruption by ice crystals. The rheological and tribological measurements suggested that with appropriate amount of crystals, the tribological properties were better maintained for emulsions prepared at slow cooling rate after freeze-thaw treatment. This strategy greatly enriched oleogel emulsion formulations and provided important clues for potential applications in food products involved with freeze-thaw treatment.

Brain targeted lactoferrin coated lipid nanocapsules for the combined effects of apocynin and lavender essential oil in PTZ induced seizures

Apocynin (APO) is a plant derived antioxidant exerting specific NADPH oxidase inhibitory action substantiating its neuroprotective effects in various CNS disorders, including epilepsy. Due to rapid elimination and poor bioavailability, treatment with APO is challenging. Correspondingly, novel APO-loaded lipid nanocapsules (APO-LNC) were formulated and coated with lactoferrin (LF-APO-LNC) to improve br ain targetability and prolong residence time. Lavender oil (LAV) was incorporated into LNC as a bioactive ingredient to act synergistically with APO in alleviating pentylenetetrazol (PTZ)-induced seizures. The optimized LF-APO-LAV/LNC showed a particle size 59.7 ± 4.5 nm with narrow distribution and 6.07 ± 1.6mV zeta potential) with high entrapment efficiency 92 ± 2.4% and sustained release (35% in 72 h). Following subcutaneous administration, LF-APO-LAV/LNC brought about ⁓twofold increase in plasma AUC and MRT compared to APO. A Log BB value of 0.2 ± 0.14 at 90 min reflects increased brain accumulation. In a PTZ-induced seizures rat model, LF-APO-LAV/LNC showed a Modified Racine score of 0.67 ± 0.47 with a significant increase in seizures latency and decrease in duration. Moreover, oxidant/antioxidant capacity and inflammatory markers levels in brain tissue were significantly improved. Histopathological and immunohistochemical assessment of brain tissue sections further supported these findings. The results suggest APO/LAV combination in LF-coated LNC as a promising approach to counteract seizures.

Advances in liposome-based delivery of RNA therapeutics for cancer treatment

Liposomal drug delivery systems stand as versatile therapeutic platforms for precisely targeting related elements in cancerous tissues owing to their intrinsic passive and acquired active targeting capabilities and exceptional compatibility with physiologic environments. When the capacity of liposomes as nanocarriers is combined with the revolutionary potential of RNA therapies in affecting undruggable targets, the outcome would be promising drug candidates as game-changers in the cancer treatment arena. However, optimizing liposome composition, physicochemical properties, and surface chemistry is paramount to maximizing their pharmacokinetic and pharmacodynamic attributes. This review highlighted the potential of liposomes as nanovehicles for RNA therapeutics through a literature review and looked at the most recent preclinical and clinical advancements in utilizing liposomal RNA therapeutics for cancer management. Notably, the discovery of novel targets, advancements in liposome engineering, and organizing well-planned clinical trials would help uncover the incredible potential of these nanotherapeutics in cancer patients.

A Comprehensive Study on Peppermint Oil and Cinnamon Oil as Nanoemulsion: Preparation, Stability, Cytotoxicity, Antimicrobial, Antifungal, and Antioxidant Activity

BACKGROUND

Recent studies have shown that nanoemulsions prepared with essential oils have significant antimicrobial potential against multidrug-resistant pathogens due to increased chemical stability. Nanoemulsion also promotes controlled and sustained release, which increases their bioavailability and efficacy against multidrug-resistant bacteria.

OBJECTIVE

This study aimed to investigate the antimicrobial, antifungal, antioxidant, and cytotoxicity properties of cinnamon essential oil and peppermint essential oil as nanoemulsions compared to pure forms. For this purpose, analyses of the selected stable nanoemulsions were carried out.

METHOD

The droplet sizes and zeta potentials of peppermint essential oil nanoemulsions and cinnamon essential oil nanoemulsions were found to be 154.6±1.42 nm and -17.1±0.68 mV and 200.3±4.71 nm and -20.0±0.81 mV, respectively. Although the amount of essential oil used in nanoemulsions was 25% w/w, antioxidant and antimicrobial activities were found to be more effective compared to pure essential oils.

RESULTS

In cytotoxicity studies on the 3T3 cell line, both essential oil nanoemulsions showed higher cell viability than pure essential oils. At the same time, cinnamon essential oil nanoemulsions exhibited a higher antioxidant property than peppermint essential oil nanoemulsions and showed superiority in the antimicrobial susceptibility test conducted against four bacteria and two fungi. Cell viability tests determined that cinnamon essential oil nanoemulsions showed considerably higher cell viability compared to pure cinnamon essential oil.

CONCLUSION

These findings indicated that the prepared nanoemulsions in the current study might positively influence the dosing regimen and clinical outcomes of antibiotic therapy.

Nanoemulsion based edible coatings for quality retention of fruits and vegetables-decoding the basics and advancements in last decade

Fruits and vegetables (F&V) are highly perishable and have important contributions to nutritional and economic sustainability. Although the developing nations have shown an immense increase in the production of horticultural commodities, the post-harvest losses are significant and have an adverse impact on the resources, economy, and environment as well. Nanoemulsion-based carriers are recognized for their diversity, natural origin, and immense potential to restrict losses while boosting the functional attributes of produce. The recent findings attest to nanoemulsions potential for extending the shelf life, managing quality, and reducing the losses of the perishables for sustainable livelihood of the farmers. However, further studies are required to evaluate the biological fate, safety, or potential toxicity of the nanoemulsion-based edible coatings. This review precisely focuses on various matrices used in the production of nanoemulsions, fabrication methods, characterization techniques, and the use of natural emulsifiers instead of chemicals. The future research focus stresses on developing low-cost fabrication techniques for nanoemulsion, improvement of the transmission properties i. e gas transmission rate (GTR), water vapor transmission rate (WVTR), and enhancing the performance of monolayer, bilayer, and other composite nanoemulsion base films. This beyond reducing the postharvest losses shall also restrict burden of the food waste management and related environmental issues at the same time.

Multiphase Chemistry under Nanoconfinement: An Electrochemical Perspective

Most relevant systems of interest to modern chemists rarely consist of a single phase. Real-world problems that require a rigorous understanding of chemical reactivity in multiple phases include the development of wearable and implantable biosensors, efficient fuel cells, single cell metabolic characterization techniques, and solar energy conversion devices. Within all of these systems, confinement effects at the nanoscale influence the chemical reaction coordinate. Thus, a fundamental understanding of the nanoconfinement effects of chemistry in multiphase environments is paramount. Electrochemistry is inherently a multiphase measurement tool reporting on a charged species traversing a phase boundary. Over the past 50 years, electrochemistry has witnessed astounding growth. Subpicoampere current measurements are routine, as is the study of single molecules and nanoparticles. This Perspective focuses on three nanoelectrochemical techniques to study multiphase chemistry under nanoconfinement: stochastic collision electrochemistry, single nanodroplet electrochemistry, and nanopore electrochemistry.

Development of a Multifunctional Oral Dosage Form via Integration of Solid Dispersion Technology with a Black Seed Oil-Based Self-Nanoemulsifying Drug Delivery System

Lansoprazole (LZP) is used to treat acid-related gastrointestinal disorders; however, its low aqueous solubility limits its oral absorption. Black seed oil (BSO) has gastroprotective effects, making it a promising addition to gastric treatment regimens. The present study aims to develop a stable multifunctional formulation integrating solid dispersion (SD) technology with a bioactive self-nanoemulsifying drug delivery system (SNEDDS) based on BSO to synergistically enhance LZP delivery and therapeutic effects. The LZP-loaded SNEDDS was prepared using BSO, Transcutol P, and Kolliphor EL. SDs were produced by microwave irradiation and lyophilization using different polymers. The formulations were characterized by particle apparent hydrodynamic radius analysis, zeta potential, SEM, DSC, PXRD, and in vitro dissolution testing. Their chemical and physical stability under accelerated conditions was also examined. Physicochemical characterization revealed that the dispersed systems were in the nanosize range (<500 nm). DSC and PXRD studies revealed that lyophilization more potently disrupted LZP crystallinity versus microwave heating. The SNEDDS effectively solubilized LZP but degraded completely within 1 day. Lyophilized SDs with Pluronic F-127 demonstrated the highest LZP dissolution efficiency (3.5-fold vs. drug) and maintained chemical stability (>97%) for 1 month. SDs combined with the SNEDDS had variable effects suggesting that the synergistic benefits were dependent on the formulation and preparation method. Lyophilized LZP-Pluronic F127 SD enabled effective and stable LZP delivery alongside the bioactive effects of the BSO-based SNEDDS. This multifunctional system is a promising candidate with the potential for optimized gastrointestinal delivery of LZP and bioactive components.

Rutin Nanocrystals with Enhanced Anti-Inflammatory Activity: Preparation and Ex Vivo/In Vivo Evaluation in an Inflammatory Rat Model

Rutin is a polyphenolic flavonoid with an interestingly wide therapeutic spectrum. However, its clinical benefits are limited by its poor aqueous solubility and low bioavailability. In an attempt to overcome these limitations, rutin nanocrystals were prepared using various stabilizers including nonionic surfactants and nonionic polymers. The nanocrystals were evaluated for particle size, zeta potential, drug entrapment efficiency, morphology, colloidal stability, rutin photostability, dissolution rate, and saturation solubility. The selected nanocrystal formulation was dispersed in a hydrogel base and the drug release kinetics and permeability through mouse skin were characterized. Rutin's anti-inflammatory efficacy was studied in a carrageenan-induced rat paw edema model. The nanocrystals had a size in the range of around 270-500 nm and a polydispersity index of around 0.3-0.5. Nanocrystals stabilized by hydroxypropyl beta-cyclodextrin (HP-β-CD) had the smallest particle size, highest drug entrapment efficiency, best colloidal stability, and highest drug photostability. Nanocrystals had around a 102- to 202-fold and 2.3- to 6.7-fold increase in the drug aqueous solubility and dissolution rate, respectively, depending on the type of stabilizer. HP-β-CD nanocrystals hydrogel had a significantly higher percent of drug released and permeated through the mouse skin compared with the free drug hydrogel. The cumulative drug amount permeated through the skin was 2.5-fold higher than that of the free drug hydrogel. In vivo studies showed that HP-β-CD-stabilized rutin nanocrystals hydrogel had significantly higher edema inhibition compared with the free drug hydrogel and commercial diclofenac sodium gel. These results highlight the potential of HP-β-CD-stabilized nanocrystals as a promising approach to enhance drug solubility, dissolution rate, and anti-inflammatory properties.

Combined Ramipril and Black Seed Oil Dosage Forms Using Bioactive Self-Nanoemulsifying Drug Delivery Systems (BIO-SNEDDSs)

Purpose: Ramipril (RMP)—an angiotensin-converting enzyme (ACE) inhibitor—and thymoquinone (THQ) suffer from poor oral bioavailability. Developing a combined liquid SNEDDS that comprises RMP and black seed oil (as a natural source of THQ) could lead to several formulations and therapeutic benefits. Methods: The present study involved comprehensive optimization of RMP/THQ liquid SNEDDS using self-emulsification assessment, equilibrium solubility studies, droplet size analysis, and experimentally designed phase diagrams. In addition, the optimized RMP/THQ SNEDDS was evaluated against pure RMP, pure THQ, and the combined pure RMP + RMP-free SNEDDS (capsule-in-capsule) dosage form via in vitro dissolution studies. Results: The phase diagram study revealed that black seed oil (BSO) showed enhanced self-emulsification efficiency with the cosolvent (Transcutol P) and hydrogenated castor oil. The phase diagram studies also revealed that the optimized formulation BSO/TCP/HCO-30 (32.25/27.75/40 % w/w) showed high apparent solubility of RMP (25.5 mg/g), good THQ content (2.7 mg/g), and nanometric (51 nm) droplet size. The in-vitro dissolution studies revealed that the optimized drug-loaded SNEDDS showed good release of RMP and THQ (up to 86% and 89%, respectively). Similarly, the isolation between RMP and SNEDDS (pure RMP + RMP-free SNEDDS) using capsule-in-capsule technology showed >84% RMP release and >82% THQ release. Conclusions: The combined pure RMP + RMP-free SNEDDS (containing black seed oil) could be a potential dosage form combining the solubilization benefits of SNEDDSs, enhancing the release of RMP/THQ along with enhancing RMP stability through its isolation from lipid-based excipients during storage.

Microfluidic preparation of a novel phoxim nanoemulsion pesticide against Spodoptera litura

With continuous development of pesticide dosage forms, emulsifiable concentrates using large amounts of organic solvents are gradually obsoleted. Nanoemulsions with high water content have been developed and the preparation processes also evolved, but these processes still exist some problems, such as poor controllability and high energy consumption. Microfluidic is a controllable nanoemulsion preparation system which mainly applied to pharmaceutical synthesis. In this study, the pesticide phoxim nanoemulsion was prepared by microfluidic technology. The optimized formulation of phoxim nanoemulsion was composed of Tween 80 and pesticide emulsifier 500 as surfactant, hexyl acetate as oil, and n-propanol as co-surfactant. Moreover, when the flow rates of water and oil in the microfluidic system were adjusted to 5 μL/min and 20 μL/min, phoxim nanoemulsion was obtained with a cloud point/boiling point of 109 °C, a particle size of 21.5 ± 0.8 nm and a potential value of - 18.7 ± 0.6 mV. Furthermore, the nanoemulsion had a rapid release effect in vitro which could be fitted by the Ritger-Peppas model. The feeding toxicity of the phoxim nanoemulsion was higher than that of commercial formulation while the contact killing effect was higher than that of the active ingredient. Therefore, pesticide dosage was reduced and the insecticidal effect was enhanced by using phoxim nanoemulsions. These results also confirm the potential of microfluidics as a green process to produce pesticide nanoemulsions.

Liposomes: structure, composition, types, and clinical applications

Liposomes are now considered the most commonly used nanocarriers for various potentially active hydrophobic and hydrophilic molecules due to their high biocompatibility, biodegradability, and low immunogenicity. Liposomes also proved to enhance drug solubility and controlled distribution, as well as their capacity for surface modifications for targeted, prolonged, and sustained release. Based on the composition, liposomes can be considered to have evolved from conventional, long-circulating, targeted, and immune-liposomes to stimuli-responsive and actively targeted liposomes. Many liposomal-based drug delivery systems are currently clinically approved to treat several diseases, such as cancer, fungal and viral infections; more liposomes have reached advanced phases in clinical trials. This review describes liposomes structure, composition, preparation methods, and clinical applications.

Spontaneous Emulsions: Adjusting Spontaneity and Phase Behavior by Hydrophilic-Lipophilic Difference-Guided Surfactant, Salt, and Oil Selection

Spontaneous emulsion behavior has been difficult to predict and could be influenced by many variables including salinity, temperature, and chemical composition of the oil and surfactant. In this work, the hydrophilic-lipophilic difference (HLD) framework was used to predict the formation of spontaneous emulsions using a mixture of Span-80 and SLES surfactants. The spontaneity and emulsion behavior of different systems were modeled by estimating the HLD_mix. The influence of surfactant ratio, salinity, and oil type was investigated. Spontaneous emulsification could only be observed when the HLD_mix was between -0.96 and 1.04. Within this range, a negative HLD_mix resulted in a greater spontaneity to form o/w emulsion, and a w/o emulsion was more likely to form when the HLD_mix was positive. When the HLD_mix was close to 0 (between -0.22 and 0.56 in our systems), emulsions were formed in both the oil and aqueous phases with high spontaneity. A combined effect of ultralow interfacial tension, Span-80 micelle swelling, and interfacial turbulence due to Marangoni effects is likely the main mechanism of the spontaneous emulsification observed in this study. A synergistic reduction in interfacial tension was observed between Span-80 and SLES (<1 mN/m). When the HLD of the system was close to 0, a bicontinuous emulsion phase was formed at the oil-water interface. The bicontinuous emulsion broke-up over time due to the ultralow interfacial tension and interfacial turbulence, forming dispersed oil and water droplets. Results from this work provide a practical method to suggest what surfactant composition, salinity, and oil type could promote (or eliminate) the conditions favorable for spontaneous emulsification.

Overcoming hydrolytic degradation challenges in topical delivery: non-aqueous nano-emulsions

INTRODUCTION

Non-aqueous nano-emulsions (NANEs) are colloidal lipid-based dispersions with nano-sized droplets formed by mixing two immiscible phases, none of which happens to be an aqueous phase. Their ability to incorporate water and oxygen sensitive drugs without any susceptibility to degradation makes them the optimum dosage form for such candidates. In NANEs, polar liquids or polyols replace the aqueous phase while surfactants remain same as used in conventional emulsions. They are a part of the nano-emulsion family albeit with substantial difference in composition and application.

AREAS COVERED

The present review provides a brief insight into the strategies of loading water-sensitive drugs into NANEs. Further advancement in these anhydrous systems with the use of solid particulate surfactants in the form of Pickering emulsions is also discussed.

EXPERT OPINION

NANEs offer a unique platform for delivering water-sensitive drugs by loading them in anhydrous formulation. The biggest advantage of NANEs vis-à-vis the other nano-cargos is that they can also be prepared without using equipment-intensive techniques. However, the use of NANEs in drug delivery is quite limited. Looking at the small number of studies available in this direction, a need for further research in this field is required to explore this delivery system further.

Combined Curcumin and Lansoprazole-Loaded Bioactive Solid Self-Nanoemulsifying Drug Delivery Systems (Bio-SSNEDDS)

BACKGROUND

The current study aimed to design a novel combination of lansoprazole (LNS) and curcumin (CUR) solid oral dosage form using bioactive self-nanoemulsifying drug delivery systems (Bio-SSNEDDS).

METHODS

Liquid SNEDDS were prepared using the lipid-excipients: Imwitor988 (cosurfactant), Kolliphor El (surfactant), the bioactive black seed (BSO) and/or zanthoxylum rhetsa seed oils (ZRO). Liquid SNEDDS were loaded with CUR and LNS, then solidified using commercially available (uncured) and processed (cured) Neusilin^® US2 (NUS2) adsorbent. A novel UHPLC method was validated to simultaneously quantify CUR and LNS in lipid-based formulations. The liquid SNEDDS were characterized in terms of self-emulsification, droplet size and zeta-potential measurements. The solidified SNEDDS were characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), in vitro dissolution and stability in accelerated storage conditions.

RESULTS

Liquid SNEDDS containing BSO produced a transparent appearance and ultra-fine droplet size (14 nm) upon aqueous dilution. The solidified SNEDDS using cured and uncured NUS2 showed complete solidification with no particle agglomeration. DSC and XRD confirmed the conversion of crystalline CUR and LNS to the amorphous form in all solid SNEDDS samples. SEM images showed that CUR/LNS-SNEDDS were relatively spherical and regular in shape. The optimized solid SNEDDS showed higher percent of cumulative release as compared to the pure drugs. Curing NUS2 with 10% PVP led to significant enhancement of CUR and LNS dissolution efficiencies (up to 1.82- and 2.75-fold, respectively) compared to uncured NUS2-based solid SNEDDS. These findings could be attributed to the significant (50%) reduction in the micropore area% in cured NUS2 which reflects blocking very small pores allowing more space for the self-emulsification process to take place in the larger-size pores. Solid SNEDDS showed significant enhancement of liquid SNEDDS stability after 6 months storage in accelerated conditions.

CONCLUSIONS

The developed Bio-SSNEDDS of CUR and LNS using processed NUS2 could be used as a potential combination therapy to improve the treatment of peptic ulcers.

Formation and Physical Stability of Zanthoxylum bungeanum Essential Oil Based Nanoemulsions Co-Stabilized with Tea Saponin and Synthetic Surfactant

The purpose of this work was to evaluate the possibility of adding tea saponin (TS) to reduce the synthetic surfactant concentration, and maintain or improve the shelf stability of nanoemulsions. The Zanthoxylum bungeanum essential oil (2.5 wt%) loaded oil-in-water nanoemulsions were co-stabilized by Tween 40 (0.5–2.5 wt%) and TS (0.1–5 wt%). A combination of several analytical techniques, such as dynamic laser scattering, interfacial tension, zeta potential, and transmission electron microscope, were used for the characterization of nanoemulsions. Low levels of TS (0.1–0.5 wt%) with Tween 40 had significant effects on the emulsification, and a nanoemulsion with the smallest droplet diameter of 89.63 ± 0.67 nm was obtained. However, in the presence of high TS concentration (0.5–5 wt%), micelles generated by the non-adsorbed surfactants in the aqueous lead to droplets growth. In addition, the combinations of Tween 40 and TS at the high level (>3.5 wt%) exerted a synergistic effect on stabilizing the nanoemulsions and preventing both Ostwald ripening and coalescence. The negative charged TS endowed the droplets with electrostatic repulsion and steric hinderance appeared to prevent flocculation and coalescence. These results would provide a potential application of natural TS in the preparation and stabilization of nanoemulsions containing essential oil.

Nanoemulsions: Formulation, characterization, biological fate, and potential role against COVID-19 and other viral outbreaks

Viral diseases are emerging as global threats. Severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), that causes coronavirus disease (COVID-19), has severe global impacts. Safety, dosage, and potency of vaccines recently approved for emergency use against SARS-CoV-2 need further evaluation. There is still no effective treatment against COVID-19; therefore, safe, and effective vaccines or therapeutics against SARS-CoV-2 are urgently needed. Oil-in-water nanoemulsions (O/W NEs) are emerging as sophisticated, protective, and therapeutic platforms. Encapsulation capacity, which offers better drug pharmacokinetics, coupled with the tunable surfaces present NEs as promising tools for pharmaceutical applications. The challenges facing drug discovery, and the advancements of NEs in drug delivery demonstrate the potential of NEs against evolving diseases, like COVID-19. Here we summarize current COVID-19 knowledge and discuss the composition, stability, preparation, characterization, and biological fate of O/W NEs. We also provide insights into NE structural-functional properties that may contribute to therapeutic or preventative solutions against COVID-19.

Enhanced oral bioavailability of Tanshinone IIA using lipid nanocapsules: Formulation, in-vitro appraisal and pharmacokinetics

Tanshinone IIA (TSIIA) is a promising phytomedicine that has been extensively studied due to its numerous biological activities, especially as an anticancer drug. However, it suffers from poor oral bioavailability owing to low aqueous solubility, poor permeability and exposure to first-pass metabolism. This study endeavored to improve TSIIA oral bioavailability by encapsulation into lipid nanocapsules (LNCs) for the first time. A previously reported phase-inversion method was used to prepare Tanshinone II A loaded LNCs (TSIIA-LNCs) with slight modifications based on a constructed phase diagram. They were then in-vitro characterized and their oral pharmacokinetics were studied in rats. TSIIA-LNCs showed excellent colloidal properties (size; 70 nm, PDI < 0.2 and zeta-potential; -13.5 mV), a high percent entrapment efficiency (98%) and a good drug payload (2.6 mg/g). Furthermore, the in-vivo pharmacokinetic study revealed a significant enhancement in both the rate and extent of absorption of TSIIA-LNCs compared with TSIIA suspension with about 3.6-fold increase in AUC _0-inf value (p ≤ 0.01). Additionally, a significant increase in both half-life and mean residence time was exhibited by TSIIA-LNCs (p ≤ 0.01), confirming their long circulating properties. Therefore, the elaborated LNCs could be addressed as a promising nanoplatform permitting higher TSIIA oral bioavailability.

Bioactive Self-Nanoemulsifying Drug Delivery Systems (Bio-SNEDDS) for Combined Oral Delivery of Curcumin and Piperine

Background: Bioactive oils of natural origin have gained huge interests from health care professionals and patients. Objective: To design a bioactive self-nanoemulsifying drug delivery system (Bio-SNEDDS) comprising curcumin (CUR) and piperine (PP) by incorporating bioactive natural oils in the formulation. Methods: The self-emulsifying properties of apricot, avocado, black seed and Zanthoxylum rhetsa seed oils were screened within various SNEDDS formulations. Each liquid SNEDDS formulation was loaded with both CUR and PP. The optimal liquid SNEDDS were solidified using Aeroperl® and Neusilin® at 1:1 w/w ratio. Liquid and solid SNEDDS were characterized by droplet size analysis, equilibrium solubility, scanning electron microscopy, X-ray powder diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopy. In-vitro dissolution studies were performed to evaluate the efficiency of CUR and PP release from solid Bio-SNEDDS. Results: The liquid SNEDDS comprised of black seed oil exhibited excellent self-emulsification performance, low droplet size along with transparent appearance. The inclusion of the cosolvent Transcutol P improved the solubilization capacity of both CUR and PP. The liquid SNEDDS were efficiently solidified using the two adsorbents and presented the drugs within amorphous state. In particular, SNEDDS comprised of black seed oil/Imwitor988/Transcutol P/Cremophor RH40 (20/20/10/50) and when solidified with Neusilin showed enhanced CUR and PP release (up to 60% and 77%, respectively). In addition, this formulation efficiently delivers the highly bioactive black seed oil to the patient. Conclusions: The optimized Bio-SNEDDS comprising black seed oil showed outstanding self-emulsification characteristics along with enhanced CUR/PP dissolution upon solidification.

Positive charge pesticide nanoemulsions prepared by the phase inversion composition method with ionic liquids

We prepared highly stable positive charge nanoemulsions with ILs that possessed fine wetting and adhesive property on wheat leaf surfaces.