Tear fluid-eye drops compatibility assessment using surface tension

Stability and Efficacy of Mucoadhesive Eye Drops Containing Olopatadine HCl: Physicochemical, Functional, and Preclinical In Vivo Assessment

Background: The incorporation of polymers into drug delivery vehicles has been shown to be an effective strategy to prolong the residence time of active ingredients in the precorneal tear film and to increase ocular bioavailability. Objectives: The aim of this study was to develop novel, viscous eye drops containing olopatadine (OCH) as the active ingredient, polysaccharides hydroxypropyl guar gum (HPG), and sodium hyaluronate (SH), individually, and in combination as functional polymers. Methods: Viscous eye drops containing 0.1% OCH in combination with HPG (0.25%) and SH (0.4%), were prepared and evaluated for their physicochemical properties, rheological behavior, mucoadhesion, and preliminary stability. A novel rheological method was used to evaluate the resistance of the eye drops under simulated blinking conditions. In vivo efficacy was evaluated using an ocular itch test in mice to compare the formulations with a commercial product. Results: The formulations remained stable and transparent, with physicochemical parameters within acceptable ranges. Rheological studies confirmed pseudoplastic flow, with the HPG-SH combination exhibiting enhanced viscosity and shear-thinning properties for prolonged retention in the eye. Mucoadhesion was highest in SH-HPG formulations. During simulated blinking cycles, eye drops containing a combination of SH and HPG polymers fully regained their initial viscosity during the resting periods. Preliminary stability studies indicate that the formulated eye drops exhibit satisfactory physicochemical stability under various storage conditions. In vivo, OCH-SH and OCH-HPG-SH drops provided prolonged antipruritic and analgesic effects compared to the reference product. Conclusions: Polysaccharide-based innovative formulations improve OCH retention, enhancing therapeutic efficacy and patient compliance in the treatment of allergic conjunctivitis.

From Preformulative Design to In Vivo Tests: A Complex Path of Requisites and Studies for Nanoparticle Ocular Application. Part 1: Design, Characterization, and Preliminary In Vitro Studies

Ocular pathologies are widely diffused worldwide, and their effective treatment, combined with a high patient compliance, is sometimes challenging to achieve due to the barriers of the eye; in this context, the use of nanoparticles for topical ophthalmic application could represent a successful strategy. Aiming to develop nanoplatforms with potential clinical applications, great attention has to be paid to their features, in relation to the route of administration and to the pharmacopoeial requirements. This review (part 1) thus embraces the preliminary steps of nanoparticle development and characterization. At the beginning, the main barriers of the eye and the different administration routes are resumed, followed by a general description of the advantages of the employment of nanoparticles for ocular topical administration. Subsequently, the preformulative steps are discussed, deepening the choice of raw materials and determining the quantitative composition. Then, a detailed report of the physicochemical and technological characterization of nanoparticles is presented, analyzing the most relevant tests that should be performed on nanoparticles to verify their properties and the requisites (both mandatory and suggested) demanded by regulatory agencies. In conclusion, some preliminary noncellular in vitro evaluation methods are described. Studies from in vitro cellular assays to in vivo tests will be discussed in a separate (part 2) review paper. Hence, this overview aims to offer a comprehensive tool to guide researchers in the choice of the most relevant studies to develop a nanoplatform for ophthalmic drug administration.

Enhanced Ocular Bioavailability and Prolonged Duration via Hydrophilic Surface Nanocomposite Vesicles for Topical Drug Administration

BACKGROUND

Internal ocular diseases, such as macular edema, uveitis, and diabetic macular edema require precise delivery of therapeutic agents to specific regions within the eye. However, the eye's complex anatomical structure and physiological barriers present significant challenges to drug penetration and distribution. Traditional eye drops suffer from low bioavailability primarily due to rapid clearance mechanisms.

METHODS

The novel ocular drug delivery system developed in this study utilizes poly(lactic-co-glycolic acid) (PLGA) nanoparticles modified with cell-penetrating peptides (CPPs). In vitro drug release studies were conducted to evaluate the sustained-release properties of the nanoparticles. Ex vivo experiments using MDCK cells assessed corneal permeability and uptake efficiency. Additionally, in vivo studies were performed in rabbit eyes to determine the nanoparticles' resistance to elimination by tears and their retention time in the aqueous humor.

RESULTS

In vitro drug release studies demonstrated superior sustained-release properties of the nanoparticles. Ex vivo experiments revealed enhanced corneal permeability and increased uptake efficiency by MDCK cells. In vivo studies in rabbit eyes confirmed the nanoparticles' resistance to elimination by lacrimal fluid and their ability to extend retention time in the aqueous humor. CPP modification significantly improved ocular retention, corneal penetration, and cellular endocytosis efficiency.

CONCLUSIONS

The CPP-modified PLGA nanoparticles provide an effective and innovative solution for ocular drug delivery, offering improved bioavailability, prolonged retention, and enhanced drug penetration, thereby overcoming the challenges of traditional intraocular drug administration methods.

Polystyrene Sulfonate Resin as an Ophthalmic Carrier for Enhanced Bioavailability of Ligustrazine Phosphate Controlled Release System

Topical ocular sustained-release drug delivery systems represent an effective strategy for the treatment of ocular diseases, for which a suitable carrier has yet to be sufficiently developed. Herein, an eye-compatible sodium polystyrene sulfonate resin (SPSR) was synthesized with a uniform particle size of about 3 μm. Ligustrazine phosphate (LP) was adsorbed to SPSR by cation exchange to form LP@SPSR. LP@SPSR suspension eye drops were further developed using the combination of Carbopol 934P and xanthan gum as suspending agents. The LP@SPSR suspension showed a sustained release in vitro, which was consistent with the observed porcine corneal penetration ex vivo. Pharmacokinetics in tear fluid of rabits indicated that LP@SPSR suspension led to prolonged ocular retention of LP and a 2-fold improved the area under the drug concentration-time curve (AUC0-t). Pharmacokinetics in the aqueous humor of rabbits showed 2.8-fold enhancement in the AUC0-t compared to LP solution. The LP@SPSR suspension exhibited no cytotoxicity to human corneal epithelial cells, nor irritation was observed in rabbit eyes. Thus, the LP@SPSR suspension has been validated as a safe and sustained release system leading to enhanced ophthalmic bioavailability for treating ocular diseases.

Physical properties of soft contact lens multipurpose solutions commercially available in Ghana

Purpose

To investigate the physical properties of commercially available multipurpose soft contact lens solutions in Ghana.

Methods

pH (Kelilong ICL-099 pH meter, China), osmolality (OSMOMAT 3000, GONOTEC, Germany), surface tension (Sigma 700 Tensiometer, Sweden), and viscosity (CFOC-200 Viscometer, Cannon Company, USA) of various soft contact lens multipurpose solutions (MPS) were measured in triplicates at room temperature. Viscosity measurements were also taken at 34 °C ocular surface temperature. The solutions examined were Opti-Free Replenish (OFR), Trufresh (TF), Avizor (AV), Freshlook (FL), and Refresh (RF).

Results

Several solutions were largely hypo-osmotic in the range of 108-231 mOsm/kg, the exception being Avizor, which had osmolality values that were closer to human tears (301 ± 0.58 mOsm/kg). The range of pH values of the solutions (6.33-8.24, mean (SD) = 7.53 ± 0.18) fell within the reported tolerable range for the ocular surface (6.20-9.00). Surface tension values ranged from 35.86 to 42.27 mNm with a mean of 38.49 ± 2.32 mNm. The average viscosity of most solutions at room temperature (25 °C) was 1.44 ± 0.49 cP with a range of 1.04-2.15 cP. Significantly lower values ranging from 0.79 to 1.58 cP were obtained at ocular surface temperature (34 °C), p = 0.0001).

Conclusions

The physical properties of many of the solutions used as MPS in Ghana are markedly variable. Nevertheless, pH, surface tension, and viscosity fall within the acceptable limits of ocular physiological tolerance; except for osmolality, which majority were outside the reported tolerable range for the ocular surface. This information may partly explain the reason some patients exhibit strong preferences for certain care systems and should aid clinical decision-making when prescribing eye care systems to patients.

Silk Fibroin Formed Bioadhesive Ophthalmic Gel for Dry Eye Syndrome Treatment

PURPOSE

Dry eye syndrome (DES), arising from various etiologic factors, leads to tear film instability and ocular surface damage. Given its anti-inflammatory effects, cyclosporine A (CsA) has been widely used as a short-term treatment option for DES. However, poor bioavailability and solubility of CsA in aqueous phase make the development of a cyclosporine A-based eye drop for ocular topical application a huge challenge.

METHODS

In this study, a novel strategy for preparing cyclosporine A-loaded silk fibroin nanoemulsion gel (CsA NBGs) was proposed to address these barriers. Additionally, the rheological properties, ocular irritation potential, tear elimination kinetics, and pharmacodynamics based on a rabbit dry eye model were investigated for the prepared CsA NBGs. Furthermore, the transcorneal mechanism across the ocular barrier was also investigated.

RESULTS

The pharmacodynamics and pharmacokinetics of CsA NBGs exhibited superior performance compared to cyclosporine eye drops, leading to a significant enhancement in the bioavailability of CsA NBGs. Furthermore, our investigation into the transcorneal mechanism of CsA NBGs revealed their ability to be absorbed by corneal epithelial cells via the paracellular pathway.

CONCLUSION

The CsA NBG formulation exhibits promising potential for intraocular drug delivery, enabling safe, effective, and controlled administration of hydrophobic drugs into the eye. Moreover, it enhances drug retention within the ocular tissues and improves systemic bioavailability, thereby demonstrating significant clinical translational prospects.

Topical Insulin Eye Drops: Stability and Safety of Two Compounded Formulations for Treating Persistent Corneal Epithelial Defects

Compounded insulin eye drops were prepared at 1 IU/mL from commercially available subcutaneous insulin by dilution in saline solution or artificial tears. Physicochemical characterization and in vitro tolerance testing in human and conjunctival cells were followed by a 28-day short-term stability study under various conditions. The formulations were isotonic (280-300 mOsm/L), had a pH close to neutral (7-8), medium surface-tension values (<56 MN/m-1), and low (≈1 mPa·s) and medium (≈5 mPa·s) viscosities (compounded normal saline solution and artificial tear-based preparation, respectively). These values remained stable for 28 days under refrigeration. Microbiological stability was also excellent. Insulin potency remained in the 90-110% range in the compounded formulations containing normal saline solution when stored at 2-8 °C for 28 days, while it decreased in those based on artificial tears. Although both formulations were well tolerated in vitro, the compounded insulin diluted in a normal saline solution exhibited better cell tolerance. Preliminary data in humans showed that insulin in saline solution was an effective and safe treatment for persistent corneal epithelial defects. Compounded insulin eye drops diluted in normal saline solution could, therefore, constitute an emergent therapy for the treatment of persistent corneal epithelial defects.

Physicochemical properties and micro-interaction between micro-nanoparticles and anterior corneal multilayer biological interface film for improving drug delivery efficacy: the transformation of tear film turnover mode

Recently, various novel drug delivery systems have been developed to overcome ocular barriers in order to improve drug efficacy. We have previously reported that montmorillonite (MT) microspheres (MPs) and solid lipid nanoparticles (SLNs) loaded with the anti-glaucoma drug betaxolol hydrochloride (BHC) exhibited sustained drug release and thus intraocular pressure (IOP) lowering effects. Here, we investigated the effect of physicochemical particle parameters on the micro-interactions with tear film mucins and corneal epithelial cells. Results showed that the MT-BHC SLNs and MT-BHC MPs eye drops significantly prolonged the precorneal retention time due to their higher viscosity and lower surface tension and contact angle compared with the BHC solution, with MT-BHC MPs exhibiting the longest retention due to their stronger hydrophobic surface. The cumulative release of MT-BHC SLNs and MT-BHC MPs was up to 87.78% and 80.43% after 12 h, respectively. Tear elimination pharmacokinetics study further confirmed that the prolonged precorneal retention time of the formulations was due to the micro-interaction between the positively charged formulations and the negatively charged tear film mucins. Moreover, the area under the IOP reduction curve (AUC) of MT-BHC SLNs and MT-BHC MPs was 1.4 and 2.5 times that of the BHC solution. Accordingly, the MT-BHC MPs also exhibit the most consistent and long-lasting IOP-lowering effect. Ocular irritation experiments showed no significant toxicity of either. Taken together, MT MPs may have the potential for more effective glaucoma treatment.

Celecoxib/Cyclodextrin Eye Drop Microsuspensions: Evaluation of In Vitro Cytotoxicity and Anti-VEGF Efficacy for Retinal Diseases

Celecoxib (CCB), a cyclooxygenase-2 inhibitor, is capable of reducing oxidative stress and vascular endothelial growth factor (VEGF) expression in retinal cells and has been shown to be effective in the treatment of diabetic retinopathy and age-related macular degeneration. However, the ocular bioavailability of CCB is hampered due to its very low aqueous solubility. In a previous study, we developed 0.5% (w/v) aqueous CCB eye drop microsuspensions (MS) containing randomly methylated β-cyclodextrin (RMβCD) or γ-cyclodextrin (γCD) and hyaluronic acid (HA) as ternary CCB/CD/HA nanoaggregates. Both formulations exhibited good physicochemical properties. Therefore, we further investigated their cytotoxicity and efficacy in a human retina cell line in this study. At a CCB concentration of 1000 μg/mL, both CCB/RMβCD and CCB/γCD eye drop MS showed low hemolysis activity (11.1 ± 0.3% or 4.9 ± 0.2%, respectively). They revealed no signs of causing irritation and were nontoxic to retinal pigment epithelial cells. Moreover, the CCB eye drop MS exhibited significant anti-VEGF activity by reducing VEGF mRNA and protein levels compared to CCB suspended in phosphate buffer saline. The ex vivo transscleral diffusion demonstrated that a high quantity of CCB (112.47 ± 37.27 μg/mL) from CCB/γCD eye drop MS was deposited in the porcine sclera. Our new findings suggest that CCB/CD eye drop MS could be safely delivered to the ocular tissues and demonstrate promising eye drop formulations for retinal disease treatment.

New trends towards glaucoma treatment: Topical osmoprotective microemulsions loaded with latanoprost

The chronic use of hypotensive agents eventually leads to ocular surface damage and poor patient compliance during glaucoma management. Thus, new sustained drug delivery systems are needed. This work aimed to develop osmoprotective latanoprost-loaded microemulsion formulations as new potential glaucoma treatments with ocular surface protective properties. The microemulsions were characterized and latanoprost encapsulation efficacy determined. In-vitro tolerance, osmoprotective efficacy, cell internalization as well as cell-microemulsion interactions and distribution were performed. In vivo hypotensive activity was conducted in rabbits to assess intraocular pressure reduction and relative ocular bioavailability. Physicochemical characterization showed nanodroplet sizes within 20-30 nm, being in vitro tolerance within 80 and 100% viability in corneal and conjunctival cells. Besides, microemulsions exhibited higher protection under hypertonic conditions than untreated cells. Cell fluorescence lasted for 11 days after short exposure to coumarin-loaded microemulsions (5 min) showing extensive internalization in different cell compartments by electronic microscopy. In vivo studies exhibited that a single instillation of latanoprost-loaded microemulsions reduced the intraocular pressure for several days (4-6 days without polymer and 9-13 days with polymers). Relative ocular bioavailability was 4.5 and 19 times higher than the marketed formulation. These findings suggest the use of these microemulsions as potential combined strategies for extended surface protection and glaucoma treatment.

Using Natural Deep Eutectic Systems as Alternative Media for Ocular Applications

The major goal of this work was to study the potential of natural deep eutectic systems (NADES) as new media for ocular formulations. In formulating eye drops, it is important to increase the retention time of the drug on the surface of eye; hence, due to their high viscosity, NADES may be interesting candidates for formulation. Different systems composed of combinations of sugars, polyols, amino acids, and choline derivatives were prepared and then characterized in terms of rheological and physicochemical properties. Our results showed that 5-10% (w/v) aqueous solutions of NADES have a good profile in terms of viscosity (0.8 to 1.2 mPa.s), osmolarity (412 to 1883 mOsmol), and pH (7.4) for their incorporation of ocular drops. Additionally, contact angle and refractive index were determined. Acetazolamide (ACZ), a highly insoluble drug used to treat glaucoma, was used as proof-of-concept. Herein, we show that NADES can increase the solubility of ACZ in aqueous solutions by at least up to 3 times, making it useful for the formulation of ACZ into ocular drops and thereby enabling more efficient treatment. The cytotoxicity assays demonstrated that NADES are biocompatible up to 5% (w/v) in aqueous media, promoting cell viability (above 80%) when compared to the control after 24 h incubation in ARPE-19 cells. Furthermore, when ACZ is dissolved in aqueous solutions of NADES, the cytotoxicity is not affected in this range of concentrations. Although further studies are necessary to design an optimal formulation incorporating NADES, this study shows that these eutectics can be powerful tools in the formulation of ocular drugs.

Comparative study of cyclosporine A liposomes and emulsions for ophthalmic drug delivery: Process optimization through response surface methodology (RSM) and biocompatibility evaluation

Herein, cyclosporine A loaded liposomes (CsA-Lips) were fabricated aimed at improving the biocompatibility of the ophthalmic formulation and getting rid of the direct contact of ocular tissues with irritant excipients. Response surface methodology was exploited in order to investigate the influence of miscellaneous factors on the key characteristics of CsA-Lips. Ratio of EPC:CsA, ratio of EPC:Chol, and stirring speed were selected as the independent variables, while size, drug-loading content (DL), and drug-loading content (DL) loss rate were applied as the response variables. In case of the maximal lack-of-fit p-value and minimum sequential p-value, quadratic model was regarded as the fittest model to analyze the data. The correlation of independent variables with response variables was described by three-dimension surface figures. Optimized formulation for CsA-Lips was obtained with ratio of EPC:CsA set as 15, ratio of EPC:Chol set as 2, and stirring speed set as 800 rpm. The particle size of CsA-Lips was 129.2 nm after optimalization while their TEM images exhibited spherical unilamellar vesicles with clearly shell-core structure. CsA released more rapidly from CsA-Lips in comparison with self-made emulsion and Restasis®. Besides, minimum cytotoxicity of CsA-Lips was perceived via both MTT method and LDH method, indicating the excellent compatibility of the ophthalmic formulation. Simultaneously, CsA-Lips showed enhanced nonspecific internalization in the cytoplasm with a time-dose-dependent manner. In conclusion, CsA-Lips could be adhibited as the hopeful ophthalmic drug delivery system clinically for dry eye syndrome (DES).

Ocular Drug Delivery: a Comprehensive Review

The human eye is a sophisticated organ with distinctive anatomy and physiology that hinders the passage of drugs into targeted ophthalmic sites. Effective topical administration is an interest of scientists for many decades. Their difficult mission is to prolong drug residence time and guarantee an appropriate ocular permeation. Several ocular obstacles oppose effective drug delivery such as precorneal, corneal, and blood-corneal barriers. Routes for ocular delivery include topical, intravitreal, intraocular, juxtascleral, subconjunctival, intracameral, and retrobulbar. More than 95% of marketed products exists in liquid state. However, other products could be in semi-solid (ointments and gels), solid state (powder, insert and lens), or mixed (in situ gel). Nowadays, attractiveness to nanotechnology-based carries is resulted from their capabilities to entrap both hydrophilic and lipophilic drugs, enhance ocular permeability, sustain residence time, improve drug stability, and augment bioavailability. Different in vitro, ex vivo, and in vivo characterization approaches help to predict the outcomes of the constructed nanocarriers. This review aims to clarify anatomy of the eye, various ocular diseases, and obstacles to ocular delivery. Moreover, it studies the advantages and drawbacks of different ocular routes of administration and dosage forms. This review also discusses different nanostructured platforms and their characterization approaches. Strategies to enhance ocular bioavailability are also explained. Finally, recent advances in ocular delivery are described.

Biopolymers in Mucoadhesive Eye Drops for Treatment of Dry Eye and Allergic Conditions: Application and Perspectives

Dry eye syndrome and allergic conjunctivitis are the most common inflammatory disorders of the eye surface. Although eye drops are the most usual prescribed dosage form, they are characterized by low ocular availability due to numerous barrier mechanisms of the eye. The use of biopolymers in liquid ophthalmic preparations has numerous advantages, such as increasing the viscosity of the tear film, exhibiting bioadhesive properties, and resisting the drainage system, leading to prolonged retention of the preparation at the site of application, and improvement of the therapeutic effect. Some mucoadhesive polymers are multifunctional excipients, so they act by different mechanisms on increasing the permeability of the cornea. Additionally, many hydrophilic biopolymers can also represent the active substances in artificial tear preparations, due to their lubrication and moisturizing effect. With the modification of conventional ophthalmic preparations, there is a need for development of new methods for their characterization. Numerous methods for the assessment of mucoadhesiveness have been suggested by the literature. This review gives an overview related to the development of mucoadhesive liquid ophthalmic formulations for the treatment of dry eye and allergic conditions.

Development of an osmoprotective microemulsion as a therapeutic platform for ocular surface protection

Self-emulsified osmoprotective ophthalmic microemulsions (O/A) were prepared by combining betaine/leucine, clusterin/oleanolic acid, and hyaluronic acid or Dextran. The microemulsions contained an internal oily phase (1.2%), an external aqueous phase (96.3%), cosolvents (1%), and surfactants (1.5%). Physicochemical characterization and in vivo and in vitro tolerance were analyzed. The formulations' osmoprotective in vitro activity was assayed in a hyperosmolar model in human corneal cells. Average internal phase sizes were 16-26 nm for the microemulsions including Dextran. Addition of hyaluronic acid increased the size range (25-39 nm). Addition of osmoprotectants did not change nanodroplet size. The formulations were isotonic (280-290 mOsm/L) with neutral pH (≈7) and zeta potential (-10 to 0 mV), low surface tension (≈35-40mN·m^-1), and low viscosity (≈1 mPa·s), except for the microemulsions containing hyaluronic acid (≈4-5 mPa·s). SEM and cryo-TEM showed that all formulations exhibited sphere-shaped morphology with good cell tolerance (≈100%) and were stable at 8 °C for 9 months. Osmoprotective formulations were well tolerated in vitro and in vivo, protecting cells from hypertonic stress. We therefore developed stable microemulsions compatible with the ocular surface that could constitute a novel tool for treatment of ophthalmic diseases.

An Evaluation of the Physicochemical Properties of Preservative-Free 0.005% (w/v) Latanoprost Ophthalmic Solutions, and the Impact on In Vitro Human Conjunctival Goblet Cell Survival

Purpose: To examine the physicochemical properties of five preservative-free (PF) 0.005% latanoprost ophthalmic products; Monoprost^®, Latanest^®, Gaap Ofteno^®, Xalmono^®, and Xaloptic^® Free. Furthermore, the study investigated the mucin production and cell survival of primary cultured human conjunctival goblet cells when treated with PF eye drops. Method: The pH value, osmolality, and surface tension were examined. Cell survival was analyzed using lactate dehydrogenase and tetrazolium dye colorimetric assays. Mucin production was analyzed with immunohistochemical staining. Results: Monoprost^® (pH value 6.84 ± 0.032) had a pH value closest to the pH value of tear fluid (pH value 7.4–7.6), whereas Gaap Ofteno^® (pH value 6.34 ± 0.004) and Latanest^® (pH value 6.33 ± 0.003) had the lowest pH values. Gaap Ofteno^® (325.9 ± 2.9 mosmol/kg) showed iso-osmolar probabilities, whereas the other products were hypo-osmolar. Gaap Ofteno^® (60.31 ± 0.35 mN/m) had a higher surface tension compared to the tear fluid (40 to 46 mN/m), as described in the literature. No significant differences in goblet cell survival or mucin release were observed between the treatments and control. Conclusion: Significant differences in pH value, osmolality, and surface tension were observed. However, this did not affect the viability of the goblet cells or the release of mucin. Clinical studies are required to evaluate the long-term effects of use on efficacy and safety.

Development and Characterization of Nanoemulsions for Ophthalmic Applications: Role of Cationic Surfactants

The eye is a very complex organ comprising several physiological and physical barriers that compromise drug absorption into deeper layers. Nanoemulsions are promising delivery systems to be used in ocular drug delivery due to their innumerous advantages, such as high retention time onto the site of application and the modified release profile of loaded drugs, thereby contributing to increasing the bioavailability of drugs for the treatment of eye diseases, in particular those affecting the posterior segment. In this review, we address the main factors that govern the development of a suitable nanoemulsion formulation for eye administration to increase the patient’s compliance to the treatment. Appropriate lipid composition and type of surfactants (with a special emphasis on cationic compounds) are discussed, together with manufacturing techniques and characterization methods that are instrumental for the development of appropriate ophthalmic nanoemulsions.

Ophthalmic Nanoemulsions: From Composition to Technological Processes and Quality Control

Nanoemulsions are considered as the most promising solution to improve the delivery of ophthalmic drugs. The design of ophthalmic nanoemulsions requires an extensive understanding of pharmaceutical as well as technological aspects related to the selection of excipients and formulation processes. This Review aims at providing the readers with a comprehensive summary of possible compositions of nanoemulsions, methods for their formulation (both laboratory and industrial), and differences between technological approaches, along with an extensive outline of the research methods enabling the confirmation of in vitro properties, pharmaceutical performance, and biological activity of the obtained product. The composition of the formulation has a major influence on the properties of the final product obtained with low-energy emulsification methods. Increasing interest in high-energy emulsification methods is a consequence of their scalability important from the industrial perspective. Considering the high-energy emulsification methods, both the composition and conditions of the process (e.g., device power level, pressure, temperature, homogenization time, or number of cycles) are important for the properties and stability of nanoemulsions. It is advisible to determine the effect of each parameter on the quality of the product to establish the optimal process parameters' range which, in turn, results in a more reproducible and efficient production.

Development and Optimization of Chitosan-Hydroxypropyl Methylcellulose In Situ Gelling Systems for Ophthalmic Delivery of Bupivacaine Hydrochloride

The aim of this study was the development and optimization of chitosan and hydroxypropyl methylcellulose (HPMC) in situ gelling systems, loaded with bupivacaine hydrochloride for topical ocular administration. This study is based on the properties of two polymers: chitosan, which has mucoadhesive action and is a pH-sensitive polymer, but also the cellulose derivative hydroxypropyl methylcellulose, a thermosensitive polymer which has mucoadhesive properties and increases the viscosity of systems. The analysis and optimization of in situ gelling systems were performed based on an experimental design and response surface methodology. The following formulation parameters were considered: X1 = chitosan concentration (0.5%, 1%), X2 = HPMC E 5 LV concentration (2%, 5%) and X3 = Chitosan/HPMC E 5 LV ratio (1/1, 2/1). In addition, the parameters to be optimized were represented by the contact angle (CA (°)), viscosity and cumulative percentage of bupivacaine hydrochloride released in vitro. The results indicate that the designed in situ gelling systems are suitable for bupivacaine prolonged ophthalmic release and overcome the principal disadvantages of the liquid’s ocular formulations. An immediate therapeutic effect corresponding to ocular anesthetic installation was assured in the first stage: burst bupivacaine release. In the second phase, the gradual drug release was assured for over 6 h. This drug release profile, together with the corresponding rheological profile and a collection of superficial properties for good ocular adhesion balanced with an adequate hydrophilic character, assured the desired quality of the attributes for the proposed systems. The system, based on chitosan 1%, HPMC E 5 LV 5% and a 1/1 polymer ratio, could be a solution for the proposed formulation of in situ gelling colloidal systems, since the viscosity of the system was within the range of the optimal viscosity of the eye, and the amount of bupivacaine hydrochloride released after 6 h was the highest at 69.55%.

Image Analysis: A Versatile Tool in the Manufacturing and Quality Control of Pharmaceutical Dosage Forms

In pharmaceutical sciences, visual inspection is one of the oldest methods used for description in pharmacopeias and is still an important part of the characterization and qualification of active ingredients, excipients, and dosage forms. With the development of technology, it is now also possible to take images of various pharmaceutical dosage forms with different imaging methods in a size range that is hardly visible or completely invisible to the human eye. By analyzing high-quality designs, physicochemical processes can be understood, and the results can be used even in the optimization of the composition of the dosage form and in the development of its production. The present study aims to show some of the countless ways image analysis can be used in the manufacturing and quality assessment of different dosage forms. This summary also includes measurements and an evaluation of, amongst others, a less studied dosage form, medicated foams.

Liposomes as vehicles for topical ophthalmic drug delivery and ocular surface protection

Introduction: The development of ophthalmic formulations able to deliver hydrophilic and hydrophobic drugs to the inner structures of the eye and restore the preocular tear film has been a leading topic of discussion over the last few years. In this sense, liposomes represent a suitable strategy to achieve these objectives in ocular drug delivery.Areas covered: Knowledge of the different physiological and anatomical eye structures, and specially the ocular surface are critical to better understanding and comprehending the characteristics required for the development of topical ophthalmic liposomal formulations. In this review, several features of liposomes are discussed such as the main materials used for their fabrication, basic structure and preparation methods, from already established to novel techniques, allowing the control and design of special characteristics. Besides, physicochemical properties, purification processes and strategies to overcome delivery or encapsulation challenges are also presented. Expert opinion: Regarding ocular drug delivery of liposomes, there are some features that can be redesigned. Specific biocompatible and biodegradable materials presenting therapeutic properties, such as lipidic compounds or polymers significantly change the way of tackling ophthalmic diseases. Besides, liposomes entail an effective, safe and versatile strategy for the treatment of diseases in the clinical practice.

Therapeutic nanoemulsions in ophthalmic drug administration: Concept in formulations and characterization techniques for ocular drug delivery

The eye is the specialized part of the body and is comprised of numerous physiological ocular barriers that limit the drug absorption at the action site. Regardless of various efforts, efficient topical ophthalmic drug delivery remains unsolved, and thus, it is extremely necessary to advance the contemporary treatments of ocular disorders affecting the anterior and posterior cavities. Nowadays, the advent of nanotechnology-based multicomponent nanoemulsions for ophthalmic drug delivery has gained popularity due to the enhancement of ocular penetrability, improve bioavailability, increase solubility, and stability of lipophilic drugs. Nanoemulsions offer the sustained/controlled drug release and increase residence time which depend on viscosity, compositions, and stabilization process, etc.; hence, decrease the instillation frequency and improve patient compliance. Further, due to the nanosized of nanoemulsions, the sterilization process is easy as conventional solutions and cause no blur vision. The review aims to summarizes the various ocular barriers, manufacturing techniques, possible mechanisms to the retention and deep penetration into the eye, and appropriate excipients with their under-lying selection principles to prevent destabilization of nanoemulsions. This review also discusses the characterization parameters of ocular drug delivery to spike the interest of those contemplating a foray in this field. Here, in short, nanoemulsions are abridged with concepts to design clinically advantageous ocular drug delivery.

In vitro physicochemical characterization and dissolution of brinzolamide ophthalmic suspensions with similar composition

The quality of an ophthalmic suspension is crucial for its in vivo performance, and often impact product's effectiveness. An in-depth understanding of critical quality attributes (CQAs) of ophthalmic suspensions such as particle size distribution (PSD) and rheology, as well as the impact of these CQAs on product performance are important for successful product development, quality control, and regulatory approval. This study employed brinzolamide ophthalmic suspension, 1%, as a model ophthalmic product, and six batches were manufactured using an innovative planetary centrifugal milling (PCM) process. Three batches were manufactured to have distinctly different PSD. These three batches had qualitatively (Q1) and quantitatively (Q2) the same composition as the model drug product (i.e., Azopt), while the differences in PSD were introduced by changing only the manufacturing process parameters. On the other hand, changes in rheology were introduced by altering the input level of the viscosity enhancing polymer in the formulation. A systematic approach was employed to understand the relation between manufacturing process parameters, CQAs, and in vitro product performance. Among the evaluated CQAs, PSD, rheology, surface tension, and drug dissolution were found more sensitive to the changes in the manufacturing processes. Most notably, we developed a rapid dissolution method (completed within minutes) employing in-situ fiber optic UV dissolution system. This novel dissolution method mimics the environmental conditions of the eye such as dissolution under "non-sink" condition and under high shear (from blinking). The method was highly discriminatory to differences in the PSD in the suspension. This study also revealed an important relation between the PSD of the suspension and its rheology which originated as a result of an interaction at the molecular level between the solid drug particles and the viscosity enhancing polymers. These findings underscore the need to evaluate CQAs of the ophthalmic suspensions in concert rather than separately when comparing ophthalmic drug products and product performance.

Functional ibuprofen-loaded cationic nanoemulsion: Development and optimization for dry eye disease treatment

Inflammation plays a key role in dry eye disease (DED) affecting millions of people worldwide. Non-steroidal anti-inflammatory drugs (NSAIDs) can be used topically to act on the inflammatory component of DED, but their limited aqueous solubility raises formulation issues. The aim of this study was development and optimization of functional cationic nanoemulsions (NEs) for DED treatment, as a formulation approach to circumvent solubility problems, prolong drug residence at the ocular surface and stabilize the tear film. Ibuprofen was employed as the model NSAID, chitosan as the cationic agent, and lecithin as the anionic surfactant enabling chitosan incorporation. Moreover, lecithin is a mixture of phospholipids including phosphatidylcholine and phosphatidylethanolamine, two constituents of the natural tear film important for its stability. NEs were characterized in terms of droplet size, polydispersity index, zeta-potential, pH, viscosity, osmolarity, surface tension, entrapment efficiency, stability, sterilizability and in vitro release. NEs mucoadhesive properties were tested rheologically after mixing with mucin dispersion. Biocompatibility was assessed employing 3D HCE-T cell-based model and ex vivo model using porcine corneas. The results of our study pointed out the NE formulation with 0.05% (w/w) chitosan as the lead formulation with physicochemical properties adequate for ophthalmic application, mucoadhesive character and excellent biocompatibility.

Exploring the Protective Potential of Carboxymethyl Terminalia catappa Polysaccharide on Blue Light Light-Emitting Diode Induced Corneal Damage

BACKGROUND

Excessive blue light light-emitting diode (LED) exposure and consequent oxidative stress causes corneal damage and corneal injuries are the major problem arising these days due to excessive use of mobile phone, TV, environment pollution, etc. Objective: In the present investigation, the protectiveness of carboxymethyl Terminalia catappa (CTC) from blue light LED-induced corneal damage was explored.

METHODS

For this purpose, Terminalia catappa (TC) was functionalized by carboxymethylation and its structural modification was confirmed by spectral attributes. Further, the CTC protective eye drop formulations (0.025-1%, w/v) were prepared and evaluated for their capability of protection from blue light LEDinduced corneal damage as compared to CTC protective eye gel (1.25-7%, w/v). The findings pointed towards excellent protection of CTC gel formulations as compared to CTC eye drop formulations. In addition, the prepared optimized CTC gel had thixotropic behavior as evident from percentage structural recovery which was 1.75 fold higher than marketed formulation (I-Comfort, HPMC 2%, w/v). The safety and non-toxicity of CTC protective eye drop and gel were confirmed by HET-CAM test. Further, a rat eye model was implemented that mimic blue light light-emitting diode induced corneal damage in day to day life to assess the protective effect of CTC protective eye drop and gel.

RESULTS

The order of protectiveness of CTC formulations was found to be CTC protective eye gel (4%, w/v) (no corneal damage)>marketed eye gel (12.34% corneal damage)=CTC protective eye drop (0.75%, w/v) (17.48% corneal damage)> marketed eye drop (51% corneal damage). The mechanism behind the protective effect of CTC eye drop and gel was associated with good free radical scavenging activity and corneal adhesive property of CTC. It is established from the present work that, carboxymethyl Terminalia catappa has protective action against blue light light-emitting diode induced corneal damage.

In vitro evaluation of stearylamine cationic nanoemulsions for improved ocular drug delivery

Oil-in-water nanoemulsions (NEs) represent one of the formulation approaches to improve eye-related bio-availability of lipophilic drugs. The potential of cationic NEs is pronounced due to the electrostatic interaction of positively charged droplets with negatively charged mucins present in the tear film, providing prolonged formulation residence at the ocular surface. The aim of this study was to develop a cationic ophthalmic NE with cationic lipid stearylamine (SA) as a carrier of a positive charge. The addition of a nonionic surfactant provided the dual electro-steric stabilization of NEs and enabled tuning of SA concentration to achieve an optimal balance between its interaction with mucins and biocompatibility. Physicochemical characterization, stability profile, in vitro mucoadhesion study and biocompatibility study employing 3D HCE-T cell-based model of corneal epithelium pointed out the NE with 0.05 % (m/m) SA as the leading formulation. Minimizing SA content while retaining droplet/mucin interactions is of great importance for efficacy and safety of future ophthalmic drug products.

Osmoprotectants in Hybrid Liposome/HPMC Systems as Potential Glaucoma Treatment

The combination of acetazolamide-loaded nano-liposomes and Hydroxypropyl methylcellulose (HPMC) with similar components to the preocular tear film in an osmoprotectant media (trehalose and erythritol) is proposed as a novel strategy to increase the ocular bioavailability of poorly soluble drugs. Ophthalmic formulations based on acetazolamide-loaded liposomes, dispersed in the osmoprotectant solution (ACZ-LP) or in combination with HPMC (ACZ-LP-P) were characterized and in vivo evaluated. The pH and tonicity of both formulations resulted in physiological ranges. The inclusion of HPMC produced an increment in viscosity (from 0.9 to 4.7 mPa·s. 64.9 ± 2.6% of acetazolamide initially included in the formulation was retained in vesicles. In both formulations, a similar onset time (1 h) and effective time periods were observed (7 h) after a single instillation (25 μL) in normotensive rabbits' eyes. The AUC_0-8h of the ACZ-LP-P was 1.5-fold higher than of ACZ-LP (p < 0.001) and the maximum hypotensive effect resulted in 1.4-fold higher (p < 0.001). In addition, the formulation of ACZ in the hybrid liposome/HPMC system produced a 30.25-folds total increment in ocular bioavailability, compared with the drug solution. Excellent tolerance in rabbits' eyes was confirmed during the study.

Employing a PLGA-TPGS based nanoparticle to improve the ocular delivery of Acyclovir

Delivering drugs via the ocular route has always been a challenge for poorly soluble drugs. The various anatomical and physiological barriers in the eye cavity hinder the residence of drugs within the corneal and precorneal regions. In this study, the nanosystem that could sufficiently deliver the poorly soluble Acyclovir topically via ocular route. Our nanosystem is composed of the biocompatible PLGA polymer stabilized with TPGS which possess a high emulsifying capacity and is also known as P-gp inhibitor. The optimized nanoparticles were prepared with 0.3% TPGS and had particle-size of 262.3 nm, zeta-potential of +15.14 mV. The physicochemical-characterization, ex vivo transcorneal permeation, ocular-irritation and Acyclovir ocular-availability, following topical ocular application of PLGA-NPs in rabbit eyes, were performed. The tested parameters and irritation by Draize's test suggested the suitability and safety of PLGA-NPs for ocular use. An ultrahigh performance liquid chromatographic method was developed, validated, and applied to quantify Acyclovir in aqueous humor which was shown to be significantly higher (p < 0.05) using the developed nanoparticles as compared to Acyclovir-aqueous suspension following their single topical ocular administration. Noticeable 2.78-, 1.71- and 2.2-times increased values of AUC_0-24h, t_1/2 (h) and MRT_0-24h were found, respectively, with the PLGA-TPGS-NPs as compared to ACY-AqS. These results demonstrate the superiority of delivering Acyclovir using a nanosystem compared to conventional methods.

Development of prednisolone-containing eye drop formulations by cyclodextrin complexation and antimicrobial, mucoadhesive biopolymer

Purpose

The formulation of topical ophthalmic products with appropriate therapeutic effect and patient compliance is a major challenge. To increase the efficiency of the ocular delivery of the drug, the enhancement of water solubility and the contact time of the drug on the surface of the cornea are necessary. In this work, prednisolone (PR)-containing eye drops were formulated with antimicrobial, mucoadhesive biopolymer and PR-cyclodextrin inclusion complex. This approach can be used for the development of innovative ophthalmic formulations.

Materials and methods

After adjusting the optimal physiological parameters, the amount of the required cyclodextrin for the highest penetration of PR was determined by dialysis membrane diffusion study. The viscosity, surface tension and mucoadhesion of the eye drops were measured. The microbiological effectiveness of zinc-hyaluronate (ZnHA) was investigated by a standard method of the European Pharmacopoeia.

Results

In this case, no significant difference of surface tension was measured in products with different amounts of cyclodextrin. According to the results of the tensile test, ZnHA as a mucoadhesive biopolymer improves the mucoadhesion of ophthalmic products. The antimicrobial stability of formulations preserved by ZnHA meets requirement B of the European Pharmacopoeia.

Conclusion

It can be stated that the innovative PR-containing compositions are suitable for producing mucoadhesive, properly preserved aqueous ophthalmic solutions with increased bioavailability attributes.