White rot fungi and advanced combined biotechnology with nanomaterials: promising tools for endocrine-disrupting compounds biotransformation

The Application of Nano Zero-Valent Iron in Synergy with White Rot Fungi in Environmental Pollution Control

Developing efficient and sustainable pollution control technologies has become a research priority in the context of escalating global environmental pollution. Nano zero-valent iron (nZVI), with its high specific surface area and strong reducing power, demonstrates remarkable performance in pollutant removal. Still, its application is limited by issues such as oxidation, passivation, and particle aggregation. White rot fungi (WRF) possess a unique enzyme system that enables them to degrade a wide range of pollutants effectively, yet they face challenges such as long degradation cycles and low degradation efficiency. Despite the significant role of nZVI in pollutant remediation, most contaminated sites still rely on microbial remediation as a concurrent or ultimate treatment method to achieve remediation goals. The synergistic combination of nZVI and WRF can leverage their respective advantages, thereby enhancing pollution control efficiency. This paper reviews the mechanisms, advantages, and disadvantages of nZVI and WRF in pollution control, lists application examples, and discusses their synergistic application in pollution control, highlighting their potential in pollutant remediation and providing new insights for combined pollutant treatment. However, research on the combined use of nZVI and WRF for pollutant remediation is still relatively scarce, necessitating a deeper understanding of their synergistic potential and further exploration of their cooperative interactions.

Design and preparation of fluorescent covalent organic frameworks for biological sensing

Covalent organic frameworks (COFs) are a new class of functional solids featuring several fantastic structural characteristics, including a great diversity of building units and cross-linking patterns, precise integration of building blocks, and adjustable topology of porous architecture. In addition to the above features, some COF samples are constructed with high-density conjugated fragments, which have unique potential advantages in fluorescence imaging, and thus may have great potential applications in bioimaging. Herein, this article summarizes the recent progress in the design and preparation of fluorescent covalent organic frameworks. We investigate the systemic correlation between the structural qualities of COF networks and biological sensors. Finally, the significant advantages, major challenges, and future opportunities of fluorescent covalent organic frameworks are discussed for the development of next-generation porous materials for sensing applications.

Effects of fungal carbon dots application on growth characteristics and cadmium uptake in maize

The advancement of nanotechnology has led to the increased use of nanomaterials for the purpose of restoring contaminated soils. However, so far no research has been reported on the interactions of carbon dots with heavy metals (loid)s in phytoremediation. The purpose of this study was to investigate the effect of a new carbon dots derived from fungal exopolysaccharide (EPSs) on the growth and cadmium uptake in maize plants. This research was carried out using a completely randomized design with three replications in a greenhouse condition. Treatments included control, carbon dots (150 mg kg-1), cadmium (50 mg kg-1) and cadmium + carbon dots (50 mg kg-1+150 mg kg-1). The carbon dots synthesized by hydrothermal method from EPSs. The results showed that shoot dry weight and chlorophyll content of maize increased 9.7% and 23.2% in the presence of carbon dots, respectively. Carbon dots improved the chlorophyll content of maize by 24.3% in the cadmium treatment. Cadmium concentration increased (106%) in maize shoot but it decreased in root maize (68%). Carbon dots caused an increase of 5.7 and 6.7 times in the transfer factor and phytoremediation rate of cadmium, respectively. The presence of carbon dots triggered an increase of 77.9% and 39.9% of dissolved organic carbon in non-contaminated and cadmium-contaminated soils, respectively. Soil microbial biomass carbon increased 54.9% and 24.1% carbon dots and cadmium + carbon dots treatments, respectively. The study demonstrates the potential of fungal carbon dots for phytoremediation of heavy metal (loid)s contaminated soils. It also highlights the potential of nanotechnology in environmental remediation efforts.

Biotransformation of bisphenol A in vivo and in vitro by laccase-producing Trametes hirsuta La-7: Kinetics, products, and mechanisms

Bisphenol A (BPA) is a ubiquitous endocrine disruptor that poses adverse human health risks. Herein, biotransformation kinetics, products, and mechanisms of BPA undergoing a laccase-producing Trametes hirsuta La-7 metabolism were for the first time reported. Strain La-7 could completely biotransform ≤0.5 mmol·L^-1 BPA within 6 d in vivo. Notably, its extracellular crude laccase solution (ECLS) and intracellular homogenized mycelium (HM) only required 6 h to convert 85.71% and 84.24% of 0.5 mmol·L^-1 BPA in vitro, respectively. The removal of BPA was noticeably hampered by adding a cytochrome P-450 inhibitor (piperonyl butoxide) in HM, disclosing that cytochrome P-450 monooxygenase participated in BPA oxidation and metabolism. BPA intermediates were elaborately identified by high-resolution mass spectrometry (HRMS) combined with ¹³C stable isotope ratios (BPA: ¹³C₁₂-BPA = 0.25: 0.25, molar concentration). Based on the accurate molecular mass, isotope labeling difference, and relative intensity ratio of product peaks, 6 versatile metabolic mechanisms of BPA, including polymerization, hydroxylation, dehydration, bond cleavage, dehydrogenation, and carboxylation in vivo and in vitro, were confirmed. Germination index values revealed that inoculating strain La-7 in a BPA-contaminated medium presented no phytotoxicity to the germinated radish (Raphanus sativus L.) seeds. In vivo, Mg²⁺, Fe²⁺, Fe³⁺, and Mn²⁺ were conducive to BPA removal, but Cd²⁺ and Hg²⁺ significantly obstructed BPA elimination. Additionally, strain La-7 also exhibited high-efficiency metabolic ability toward estrone (E1), 17β-estradiol (E2), and 17α-ethinylestradiol (EE2), with more than 96.13%, 96.65%, and 100% of E1, E2, and EE2 having been converted, respectively. Our findings provide an environmentally powerful laccase-producing fungus to decontaminate endocrine disruptor-contaminated water matrices by radical polymerization and oxidative decomposition.

Filamentous fungi for sustainable remediation of pharmaceutical compounds, heavy metal and oil hydrocarbons

This review presents a comprehensive summary of the latest research in the field of bioremediation with filamentous fungi. The main focus is on the issue of recent progress in remediation of pharmaceutical compounds, heavy metal treatment and oil hydrocarbons mycoremediation that are usually insufficiently represented in other reviews. It encompasses a variety of cellular mechanisms involved in bioremediation used by filamentous fungi, including bio-adsorption, bio-surfactant production, bio-mineralization, bio-precipitation, as well as extracellular and intracellular enzymatic processes. Processes for wastewater treatment accomplished through physical, biological, and chemical processes are briefly described. The species diversity of filamentous fungi used in pollutant removal, including widely studied species of Aspergillus, Penicillium, Fusarium, Verticillium, Phanerochaete and other species of Basidiomycota and Zygomycota are summarized. The removal efficiency of filamentous fungi and time of elimination of a wide variety of pollutant compounds and their easy handling make them excellent tools for the bioremediation of emerging contaminants. Various types of beneficial byproducts made by filamentous fungi, such as raw material for feed and food production, chitosan, ethanol, lignocellulolytic enzymes, organic acids, as well as nanoparticles, are discussed. Finally, challenges faced, future prospects, and how innovative technologies can be used to further exploit and enhance the abilities of fungi in wastewater remediation, are mentioned.

Damage and elimination of soil and water antibiotic and heavy metal pollution caused by livestock husbandry

The combination of antibiotics and heavy metals (HMs) increases the toxicity range of influence and requires additional research attention. This article analyzed the toxicity mechanisms and damage of combined pollution. Cross-resistance, co-resistance, and co-regulation are the primary toxicity mechanisms. Combined pollution increases antibiotic resistance genes (ARGs), increases bacterial resistance, and promotes the horizontal transfer of ARGs, affecting the types and distribution of microorganisms. The hazard of combined pollution varies with concentration and composition. The physicochemical and biological technologies for eliminating combined pollution are primarily elaborated. Adsorption, photocatalytic degradation, and microbial treatment show high removal rates and good recyclability, indicating good application potential. This review provides a basis and reference for the further study the elimination of combined antibiotic and HM pollution.

Biosynthesis and chemical composition of nanomaterials in agricultural soil bioremediation: a review

Nanomaterials (NMs) are currently being used in agricultural soils as part of a new bioremediation (BR) process. In this study, we reviewed the biosynthesis of NMs, as well as their chemical composition and prospective strategies for helpful and sustainable agricultural soil bioremediation (BR). Different types of NMs, such as nanoparticles, nanocomposites, nanocrystals, nano-powders, and nanotubes, are used in agricultural soil reclamation, and they reflect the toxicity of NMs to microorganisms. Plants (Sargassum muticum, Dodonaea viscose, Aloe Vera, Rosemarinus officinalis, Azadirachta indica, Green tea, and so on) and microorganisms (Escherichia coli, Shewanella oneidensis, Pleurotus sp., Klebsiella oxytoca, Aspergillus clavatus, and so on) are the primary sources for the biosynthesis of NMs. By using the BR process, microorganisms, such as bacteria and plants, can immobilize metals and change both inorganic and organic contaminants in the soil. Combining NMs with bioremediation techniques for agricultural soil remediation will be a valuable long-term solution.

Leachate treatment potential of nanomaterial based assemblies: a systematic review on recent development

Rapid development of the population has brought about a serious problem of waste generation and management. Open dumping and land filling are two of the preferred options for waste management and treatment. As a consequence of this, the accumulation of leachates has become one of the concerns for environmental sustainability. In this regard, various treatment methodologies have been developed in recent decades. Among them, the nanomaterial-based approaches are the emerging ones in the current scenario due to their various unique properties. Furthermore, nanomaterial-based assemblies (i.e., nanomaterials combined with microbes, chemical catalysts, enzymes, and so on) have been introduced as a novel modification for leachate treatment. This work, therefore, has been dedicated to comprehensively reviewing all nanomaterial based leachate treatment techniques. In this regard, the first part of this review will discuss the nano catalyst, nano adsorbent along with their synthesis and mechanistic view of pollutant removal potential. In the second part, the nanomaterial-based microbial conjugates applied in the leachate treatments have been discussed. Apart from this, various other nanomaterial-based methods have been discussed in the third part of the review. Hence this review is providing an insight of all the recent developments pertaining to the nano material based leachate treatment techniques.

Enhanced degradation capability of white-rot fungi after short-term pre-exposure to silver ion: Performance and selectively antimicrobial mechanisms

Azo dyes in wastewater have great threats to environment and human health. White-rot fungi (WRF) have broad-spectrum potential for such refractory organics bioremediation; however, their applications are largely restrained by the poor viability owning to microbial invasion under non-sterile conditions. In this study, short-term pre-exposure to silver ion (Ag⁺) was demonstrated to be a practical, economic, and green method to enhance the perdurability of azo dyes decoloration by WRF Phanerochaete chrysosporium under non-sterile conditions. In control (without Ag⁺ pre-exposure), decoloration deactivated since cycle 7 (<10%), whereas in Ag⁺ pre-exposure groups, the decoloration ratios remained 91.5%-94.7% after 7 cycles. Variations in decoloration-related extracellular lignin enzyme activities were consistent with the decoloration effectiveness. The enhanced decoloration capability in Ag⁺ pre-exposure groups under non-sterile conditions could be ascribed to the selectively antimicrobial action by Ag⁺. The released Ag⁺ from the self-assembled silver nanoparticles (AgNPs) could selectively "stimulate" the proliferation and viability of P. chrysosporium, and simultaneously inhibit the growths of invasive microorganisms. The pyrosequencing results indicated that genus Sphingomonas (24.1%-31.3%) was the main invasive bacteria in Ag⁺ pre-exposure groups after long-term operation owing to the AgNPs passivation. As control, the invasive fungi (Asterotremella humicola) and bacteria (Burkholderia spp.) occurred in control after short-term operation, and genus Burkholderia (74.9%) dominated after long-term operation, leading to decoloration deactivation. Overall, these findings offer a new insight into the bio-nano interactions between WRF and invasive microorganisms in response to Ag⁺ or biogenic AgNPs, and could extend WRF application perspective under non-sterile conditions in future.

Insight into the inhibitory mechanism of inorganic ligands on the adsorption of tetracycline onto hematite

Inorganic ligands, ubiquitous in the natural environment, can interact with iron oxide minerals. To date, our knowledge regarding the effects of inorganic ligands on the adsorption properties of antibiotics onto iron oxides is still limited. In this work, the influences of different inorganic ligands (chosen iodate, silicate, and phosphate as the model ligands) on the adsorption of tetracycline (TC) onto hematite were examined. Adsorption isotherms indicated that inorganic ligands inhibited TC adsorption. The observations were attributed to the increase of electrostatic repulsion between anionic species (i.e., TC^-) and negatively charged hematite particles as well as the competition between TC^- species and inorganic ligand anions for the adsorption sites on hematite surfaces. Interestingly, the inhibitory effects of the three inorganic ligands were in the order of phosphate > silicate > iodate; the trend was stemmed from their differences in the binding affinities to hematite and the molecular size. When the background solutions contained divalent cations (e.g., Ca²⁺), surface precipitation of Ca-inorganic ligand compounds on hematite was another important mechanism for the inhibitory effects. Furthermore, adsorption of TC onto hematite with or without inorganic ligands was strongly affected by solution pH, which was due to the combination of the amphoteric behavior of TC and highly pH-dependent surface charges of the hematite mineral. Current results highlight the critical roles of ubiquitous inorganic ligands in revealing the fate of tetracycline antibiotics in natural systems.

Bibliometric analysis of global research on white rot fungi biotechnology for environmental application

In recent years, white rot fungi (WRFs) have received tremendous attention as a biotechnological tool for environmental pollution control. In order to systematically and comprehensively describe the progress, trends, and hotspots of WRF biotechnology in the field of environmental pollution control, the 3967 related publications from 2003 to 2020 were collected from Web of Science Core Collection database, and the bibliometric characteristics including publication output, country, institution, journal, author, citation frequency, h-index, and research focus were evaluated by using Excel 2007, CiteSpace V, and VOSviewer. The results indicated that the number of research publications increased rapidly before 2009, but after that, the number of publications fluctuated in a certain range. China and USA were the most productive countries and the most active country in international cooperation. In this field, most authors tend to cooperate within a small group. The journal and subject category with the largest number of publications are "International Biodeterioration & Biodegradation" and "Biotechnology Applied Microbiology", respectively. The analysis of high-frequency keywords revealed that "laccase", "biodegradation", "decolorization", and "Phanerochaete chrysosporium" were the most cited terms among all publications. The pretreatment of biomass waste, decolorization of dye wastewater, and bioremediation of polluted environment are the key research directions of WRF biotechnology. Finally, the frontier topics and active authors in this research field were identified using burst detection. We believe that this bibliometric study provides a comprehensive and systematic overview and promoted the future cooperative research and knowledge exchange in this field of WRF biotechnology for environmental applications.

Study on the oxidative stress and transcriptional level in Cr(VI) and Hg(II) reducing strain Acinetobacter indicus yy-1 isolated from chromium-contaminated soil

The bioreduction of Cr(VI) and Hg(II) has become a hot topic in the field of heavy metals bioremediation. However, the mechanism of antioxidant stress in Cr(VI) and Hg(II) reducing bacteria is still not clear. In this work, a novel Cr(VI) and Hg(II) reducing strain Acinetobacter indicus yy-1, was isolated from chromium landfill at a chromate factory, which was used to investigate the mechanism of antioxidant stress during the Cr(VI) and Hg(II) reduction process. The results demonstrated that the removal of Cr(VI) and Hg(II) by A. indicus yy-1 from solution was through reduction rather than biosorption. The reduction rates of Cr(VI) and Hg(II) by resting cells reached 59.71% and 31.73% at 24 h with initial concentration of 10 mg L^-1, respectively. X-ray photoelectron spectroscopy (XPS) analysis further showed that Cr(III) and Hg(0) were mainly the Cr(VI)- and Hg(II)-reduced productions, respectively. Results of physiological assays showed Hg(II) was more toxic to A. indicus yy-1 than Cr(VI), and the activities of antioxidant enzymes (SOD and CAT) were significantly increased in A. indicus yy-1 for relieving the oxidative stress. The transcriptional level of genes related to Cr(VI) and Hg(II) reductases and antioxidant enzymes were up-regulated, indicating that the reductases have participated in the reduction of Cr(VI) and Hg(II), and SOD and CAT served as the vital antioxidant enzymes for defending the oxidative stress. This work provides a deep insight into the mechanism of antioxidant stress in Cr(VI) and Hg(II) reducing bacteria, which helps seek the highly resistant heavy metal reducing bacteria.

Optimization of growth conditions for enhancing the production of microbial laccase and its application in treating antibiotic contamination in wastewater

In this work, seven indigenous macrofungal isolates were selected to screen for their laccase production capability. Among them, isolates viz., Pleurotus eryngii, Pleurotus florida, Pleurotus sajor caju and Gandoderma lucidum were found to exhibit high laccase activity in the preliminary studies and were thus selected for the optimization studies with an aim to enhance laccase production. The pH optimization studies were carried out between pH range of 4-6. The laccase activity and biomass were found to be optimum at pH 4, 4.5, 4.5 and 5 for P. eryngii, P. florida, P. sajor caju and G. lucidum, respectively. Optimization studies with chemical inducers namely, tannic acid, 2,6 dimethoxyphenol and copper sulphate at three different concentration levels were conducted and tannic acid at 2 mM concentration was found to increase the laccase activity to about 45% followed by 2,6 dimethoxyphenol (2 mM) with an increase of about 43% and copper sulphate (0.1 mM) showing 21% increase in the yield. Biodegradation studies utilizing laccase isolated from P. eryngii, P. florida and P. sajor caju was carried out for a commonly detected fluoroquinolone antibiotic, levofloxacin, in water and pharmaceutical wastewater. The results indicated that the degradation efficiency of levofloxacin using laccase isolated from P. eryngii (88.9%) was comparable to commercial laccase (89%). When the cost economics of using crude laccase was evaluated against commercial laccase it was evident that the total cost of the treatment could be reduced by 71.7% if commercial grade laccase was replaced by crude enzyme extracted from indigenous macrofungi such Pleurotus eryngii, Pleurotus florida, and Pleurotus sajor caju indicating a promising and cost-effective alternative for wastewater treatment.

Megamerger of biosorbents and catalytic technologies for the removal of heavy metals from wastewater: Preparation, final disposal, mechanism and influencing factors

Heavy metal pollution, because of its high toxicity, non-biodegradability and biological enrichment, has been identified as a global aquatic ecosystems threat in recent decades. Due to the high efficiency, low cost, satisfactory recyclability, easy storage and separation, biosorbents have exhibited a promising prospect for heavy metals treatment in aqueous phase. This article comprehensively summarized different types of biosorbents derived from available low-cost raw materials such as agricultural and forestry wastes. The raw materials obtained are treated with conventional pretreatment or novel methods, which can greatly enhance the adsorption performance of the biosorbents. The suitable immobilization methods can not only further enhance the adsorption performance of the biosorbents, but also facilitate the process of separating the biosorbents from the wastewater. In addition, once biosorbents are put into large-scale use, the final disposal problems cannot be avoided. Therefore, it is necessary to review the currently accepted final disposal methods of biosorbents. Moreover, through the analysis of the adsorption and desorption mechanisms of biosorbents, it is not only beneficial to find the better methods to improve the adsorption performance of the biosorbents, but also better to explain the influencing factors of adsorption effect for biosorbents. Especially, different from many researches focused on biosorbents, this work highlighted the combination of biosorbents with catalytic technologies, which provided new ideas for the follow-up research direction of biosorbents. Finally, the purpose of this paper is to inject new impetus into the future development of biosorbents.

A Review on Quantum Dots Modified g-C3N4-Based Photocatalysts with Improved Photocatalytic Activity

In the 21st century, the development of sustainable energy and advanced technologies to cope with energy shortages and environmental pollution has become vital. Semiconductor photocatalysis is a promising technology that can directly convert solar energy to chemical energy and is extensively used for its environmentally-friendly properties. In the field of photocatalysis, graphitic carbon nitride (g-C3N4) has obtained increasing interest due to its unique physicochemical properties. Therefore, numerous researchers have attempted to integrate quantum dots (QDs) with g-C3N4 to optimize the photocatalytic activity. In this review, recent progress in combining g-C3N4 with QDs for synthesizing new photocatalysts was introduced. The methods of QDs/g-C3N4-based photocatalysts synthesis are summarized. Recent studies assessing the application of photocatalytic performance and mechanism of modification of g-C3N4 with carbon quantum dots (CQDs), graphene quantum dots (GQDs), and g-C3N4 QDs are herein discussed. Lastly, challenges and future perspectives of QDs modified g-C3N4-based photocatalysts in photocatalytic applications are discussed. We hope that this review will provide a valuable overview and insight for the promotion of applications of QDs modified g-C3N4 based-photocatalysts.

Chloro-phosphate impregnated biochar prepared by co-precipitation for the lead, cadmium and copper synergic scavenging from aqueous solution

This work evaluated the possibility of lead (Pb²⁺), cadmium (Cd²⁺) and copper (Cu²⁺) ions synergic scavenging by a chloro-phosphate impregnated biochar (CPBC) from aqueous solution. Adsorption experiments displayed that the adsorption capacity of heavy metals by CPBC can be improved better compared with the pristine biochar (BC). The X-ray diffraction (XRD) analysis further demonstrated that the precipitation of Pb₅(PO₄)₃Cl, Cd₅(PO₄)₃Cl and Cu₃(PO₄)₃ might be responsible for Pb²⁺, Cd²⁺ and Cu²⁺ scavenging. The competitive adsorption exhibited that Pb²⁺, Cd²⁺ and Cu²⁺ would compete for the same adsorption sites of CPBC when they coexisted and the adsorption affinity of CPBC was observed in the following order: Pb²⁺ > Cd²⁺ > Cu²⁺. The available phosphorus results suggested that the combination of biochar with phosphate materials can both improve the adsorption performance and reduce the risk of eutrophication by using phosphate materials which can provide a promising application for multiple heavy metals scavenging.

Recent development of advanced biotechnology for wastewater treatment

The importance of highly efficient wastewater treatment is evident from aggravated water crises. With the development of green technology, wastewater treatment is required in an eco-friendly manner. Biotechnology is a promising solution to address this problem, including treatment and monitoring processes. The main directions and differences in biotreatment process are related to the surrounding environmental conditions, biological processes, and the type of microorganisms. It is significant to find suitable biotreatment methods to meet the specific requirements for practical situations. In this review, we first provide a comprehensive overview of optimized biotreatment processes for treating wastewater during different conditions. Both the advantages and disadvantages of these biotechnologies are discussed at length, along with their application scope. Then, we elaborated on recent developments of advanced biosensors (i.e. optical, electrochemical, and other biosensors) for monitoring processes. Finally, we discuss the limitations and perspectives of biological methods and biosensors applied in wastewater treatment. Overall, this review aims to project a rapid developmental path showing a broad vision of recent biotechnologies, applications, challenges, and opportunities for scholars in biotechnological fields for "green" wastewater treatment.

Biotransformation of Pristine and Oxidized Carbon Nanotubes by the White Rot Fungus Phanerochaete chrysosporium

Carbon nanomaterials are widely studied and applied nowadays, with annual production increasing. After entering the environment, the complete degradation of these carbon nanomaterials by microorganisms is proposed as an effective approach for detoxification and remediation. In this study, we evaluated the degradation of pristine multiwalled carbon nanotubes (p-MWCNTs) and oxidized multiwalled carbon nanotubes (o-MWCNTs) by the white rot fungus Phanerochaete chrysosporium, which is a powerful decomposer in the carbon cycle and environmental remediation. Both p-MWCNTs and o-MWCNTs were partially oxidized by P. chrysosporium as indicated by the addition of oxygen atoms to the carbon skeleton in the forms of C=O and O-H bonds. The fungal oxidation led to the shortening of MWCNTs, where precipitated o-MWCNTs showed more short tubes. During the transformation, the defects on the tubes became detached from the carbon skeleton, resulting in decreases of the ID/IG (intensity of D-band/ intensity of G-band) values in Raman spectra. The transformation mechanism was attributed to the enzymatic degradation by laccase and manganese peroxidase excreted by P. chrysosporium. The results collectively indicated that MWCNTs could be transformed by P. chrysosporium, but complete degradation could not be achieved in a short time period. The implications on the environmental risks of carbon nanomaterials are discussed.

Decontamination of lead and tetracycline from aqueous solution by a promising carbonaceous nanocomposite: Interaction and mechanisms insight

Innovative carbonaceous nano-chlorapatites (CNClAPs) which originated from the pyrolyzation of the mixture of bamboo residues and chlorapatites varying from 400 °C to 600 °C were used to investigate the decontamination efficacy of lead (Pb²⁺) and tetracycline (TC) from wastewater. Rising pyrolytic temperature can highly improve the decontamination efficacy, of which CNClAP600 exhibited the most remarkable effects for Pb²⁺ and TC decontamination (90.37% for Pb²⁺ and 86.58% for TC at pH = 7). The kinetic, isotherm and characterization analysis demonstrated that the inner mechanisms for the decontamination of Pb²⁺ and TC involved precipitation, electrostatic interaction, hydrogen bonding, π-π interaction and pore filling. Experiment indicated that the enhancement and competitive adsorption resulted from the interaction between Pb²⁺ and TC could facilitate their joint decontamination under low concentrations. This research shed light on the management of coexisting heavy metals and organic matters contamination in wastewater by CNClAPs under different temperatures.

Transformation of lamotrigine by white-rot fungus Pleurotus ostreatus

One of the most persistent pharmaceutical compounds commonly found in treated wastewater is lamotrigine (LTG). It has also been detected in soils and crops irrigated with treated wastewater. Here we focused on the ability of the white-rot edible mushroom Pleurotus ostreatus to remove and transform LTG in liquid cultures. At concentrations of environmental relevance (1 and 10 μg L^-1) LTG was almost completely removed from the culture medium within 20 days. To elucidate the mechanism of LTG removal and transformation, we applied a physiological-based approach using inhibitors and a competing agent. These experiments were conducted at a higher concentration for metabolites detection. Based on identification of sulfur-containing metabolites and LTG N2-oxide and the effect of specific inhibitors, cytochrome P450 oxidation is suggested as one of the reaction mechanisms leading to LTG transformation. The variety and number of transformation products (i.e., conjugates) found in the current study were larger than reported in mammals. Moreover, known conjugates with glucuronide, glutathione, or cysteine/glycine, were not found in our system. Since the majority of the identified transformation products were conjugates of LTG, this study highlights the persistence of LTG as an organic pollutant in ecosystems exposed to wastewater.

Cell envelop is the key site for Cr(Ⅵ) reduction by Oceanobacillus oncorhynchi W4, a newly isolated Cr(Ⅵ) reducing bacterium

The Cr(Ⅵ) removal way and Cr(Ⅵ) reducing site of Oceanobacillus oncorhynchi W4, a novel Cr(Ⅵ) reducing bacterium, were investigated in this study. Results showed that about 74.2% of Cr(Ⅵ) was removed from solution by growing cells within 72 h. Moreover, heating-killed resting cells had little Cr(Ⅵ) removal capacity, which was significantly lower than that of resting cells, which reached nearly 80% removal rate, suggesting that the way of Cr(Ⅵ) removal mainly relied on biological reduction rather than biosorption. And the Cr(Ⅵ) reduction was found to be significantly enhanced by some electron donors, especially glycerin, which further verified enzyme-mediated biological reduction as the way for Cr(Ⅵ) removal. Experiments of Cr(Ⅵ) removal by permeable cells indicated that there was no significant difference in chromium reduction between the impermeable cells and the permeable cells. The cell envelop fraction had a Cr(Ⅵ) removal rate of 82.9%, apparently higher than cytoplasmic fraction (11.1%), indicating that the cell envelop was the main location for Cr(Ⅵ) reduction, which were further demonstrated by Scanning Electron Microscope and Transmission electron microscopy plus EDS analysis. Furthermore, analysis of X-ray photoelectron spectroscopy manifested that CO, C-OH and C-OC groups on the surfaces played major roles in correlation with chromium species.

Peroxidase-Like Activity of Smart Nanomaterials and Their Advanced Application in Colorimetric Glucose Biosensors

Diabetes is a dominating health issue with 425 million people suffering from the disease worldwide and 4 million deaths each year. To avoid further complications, the diabetic patient blood glucose level should be strictly monitored despite there being no cure for diabetes. Colorimetric biosensing has attracted significant attention because of its low cost, simplicity, and practicality. Recently, some nanomaterials have been found that possess unexpected peroxidase-like activity, and great advances have been made in fabricating colorimetric glucose biosensors based on the peroxidase-like activity of these nanomaterials using glucose oxidase. Compared with natural horseradish peroxidase, the nanomaterials exhibit flexibility in structure design and composition, and have easy separation and storage, high stability, simple preparation, and tunable catalytic activity. To highlight the significant progress in the field of nanomaterial-based peroxidase-like activity, this work discusses the various smart nanomaterials that mimic horseradish peroxidase and its mechanism and development history, and the applications in colorimetric glucose biosensors. Different approaches for tunable peroxidase-like activity of nanomaterials are summarized, such as size, morphology, and shape; surface modification and coating; and metal doping and alloy. Finally, the conclusion and challenges facing peroxidase-like activity of nanomaterials and future directions are discussed.

Immobilizing laccase on kaolinite and its application in treatment of malachite green effluent with the coexistence of Cd (П)

Malachite green effluent with the Coexistence of Cd (П) was efficiently decolorized by kaolinite-laccase (Kaolin-Lac). Laccase from Trametes versicolor was immobilized onto the kaolinite through physical adsorption contact. The optimal conditions were 180 min of immobilization time and 0.8 mg/mL of enzyme solution. Kaolin-Lac could obtain a loading efficiency of 88.22%, a loading capacity of 12.25 mg/g, and the highest activity of 839.01 U/g. Moreover, the process of immobilization increased its pH stability and operational stability. Kaolin-Lac retained above 50% of the original activity and nearly 80% decolorization for MG after 5 cycles. In the presence of 3, 5-Dimethoxy-4-hydroxybenzaldehyde (SA), Kaolin-Lac could degrade over 98% of malachite green. The coexistence of Cd (П) was beneficial to the decolorization of malachite green by Kaolin-Lac. The structural and morphological features of kaolinite, Kaolin-Lac and Kaolin-Lac after degradation were determined by scanning electron microscopy-energy spectrum analysis (SEM-EDS) and Fourier transform infrared spectroscopy (FTIR). Cadmium appeared on the Kaolin-Lac after degradation. After immobilization and degradation, the surface groups on kaolinite were changed. Kaolin-Lac showed its more potential continuous employment than free laccase in practical malachite green dyes effluent mixed with Cd (П).

Recent advances in covalent organic frameworks (COFs) as a smart sensing material

Recent advances in covalent organic frameworks (COFs) as a smart sensing material are summarized and highlighted.

Nanoremediation of cadmium contaminated river sediments: Microbial response and organic carbon changes

The application of nanomaterials to contaminated river sediments could induce important changes in the speciation of heavy metals with potential impacts on ecosystem. Here, rhamnolipid (RL)-stabilized nanoscale zero-valent iron (RNZVI) was conducted to test its potential performance in changing the mobility and speciation of cadmium (Cd) in river sediments, with consideration of the influences of microbial community and organic carbon (OC). Compared to NZVI, RNZVI was more effective in transforming labile Cd to stable fraction with a maximum residual concentration increasing by 11.37 mg/kg after 42 days of incubation. Bacterial community structure was tracked using high-throughput sequencing of 16S rRNA genes. Results indicated that the application of RNZVI changed the bacterial community structure and increased the relative abundance of Fe(III)-reducing bacteria, which could redistribute Fe combined Cd into a more stable Fe mineral phase. The contents of OC were gradually decreased and became stable, might resulting from OC bioavailability's being stimulated by RNZVI through changing the bacterial community composition. This study indicates that abiotic process (i.e., from reaction with NZVI) and biotic process fueled by RNZVI lead to the immobilization of Cd in river sediments.

Graphitic Carbon Nitride-Based Heterojunction Photoactive Nanocomposites: Applications and Mechanism Insight

The design of heterojunction with superior performance of light absorption and appropriate conduction band and valence band potentials is a promising approach for the applications in efficient environmental remediation and the solar energy storage. In recent years, many studies have been devoted to the applications of graphitic carbon nitride (g-C₃N₄)-based heterojunction photoactive nanomaterials under visible light irradiation due to its excellent physical, optical, and electrical properties, which inspired us to compile this review. Although many reviews demonstrated about the syntheses and applications of g-C₃N₄ composites, a targeted review on the systematic application and photocatalytic mechanisms of g-C₃N₄-based heterojunction, in which components are in intimate linkage with each other rather than a physical mixture, is still absent. In this review, the applications of g-C₃N₄-based heterojunction photoactive nanomaterials in environmental remediation and solar energy storage, such as photocatalytic treatment of persistent organic pollutants, heavy-metal-ion redox, oxidative decomposition of pathogens, water splitting for H₂ evolution, and CO₂ reduction, are systematically discussed. In addition, some emerging applications, such as solar cells and biosensors, are also introduced. Meanwhile, a comprehensive assessment on the basis of first-principles calculations and the thermodynamics and kinetics of surface catalytic reaction for the electronic structure and photocatalytic properties of g-C₃N₄-based heterojunction are valued by this review. In the end, a brief summary and perspectives in designing practical heterojunction photoactive nanomaterials also showed the bright future of g-C₃N₄-based heterojunction. Altogether, this review systematically complements the information that previous reviews have frequently ignored and points out the future development trends of g-C₃N₄-based heterojunction, which expected to provide important references and right directions for the development and practical applications of g-C₃N₄-based heterojunction photoactive nanomaterials.