Pharmacokinetics and tissue distribution of an orally administered mucoadhesive chitosan-coated amphotericin B-Loaded nanostructured lipid carrier (NLC) in rats

Physicochemical modifications in microwave-irradiated chitosan: biopharmaceutical and medical applications

Biopharmaceutical and biomedical applications of chitosan has evolved exponentially in the past decade, owing to its unique physicochemical properties. However, further applications can be garnered from modified chitosan, specifically, depolymerized chitosan, with potentially useful applications in drug delivery or biomedicine. The use of microwave irradiation in depolymerization of chitosan appears to be more consequential than other methods, and results in modification of key physicochemical properties of chitosan, including molecular weight, viscosity and degree of deacetylation. In-depth review of such microwave-depolymerized chitosan and subsequent potential biopharmaceutical or biomedical applications has not been presented before. Herein, we present a detailed review of key physicochemical changes in chitosan following various depolymerization approaches, with focus on microwave irradiation and how these changes impact relevant biopharmaceutical or biomedical applications.

Exploring the permeability of Amphotericin B trough serum albumin dispersions and lipid nanocarriers for oral delivery

Amphotericin B (AmB) is a potent polyenic antifungal agent with leishmanicidal activity. Due to its low solubility and permeability in the gastrointestinal tract, AmB is usually administered intravenously. In this context, various approaches have been used to try to improve these properties. Some of the systems developed have shown proven successful, but there is still a lack of knowledge about the pathways AmB takes after oral administration. Therefore, the aim of this work was not only to obtain aqueous dispersions containing AmB at different aggregation states, but also to entrap this molecule in nanocarriers, and evaluate the influence of these conditions on the jejunal permeability of AmB. To observe the aggregation states of AmB, physicochemical characterization of AmB-albumin complexes and AmB-loaded formulations was performed. Different degrees of AmB aggregation states were obtained. Thus, permeability tests were performed in the Ussing chamber and a decrease in AmB concentration in the donor compartment was observed. Electrophysiological measurements showed different responses depending on the AmB formulation. In conclusion, although control of the AmB aggregation state was observed by physicochemical characterization, this approach does not seem to have a sufficient effect on AmB permeability, but on its toxicity. For a complete understanding of AmB-loaded nanocarriers, other pathways, such as lymphatic absorption, should also be investigated.

Tacrolimus loaded nanostructured lipid carriers using Moringa oleifera seed oil: design, optimization and in-vitro evaluations

The proposed research aims to develop Tacrolimus-loaded nanostructured lipid carriers (TAC-loaded NLCs) to overcome poor aqueous solubility and dissolution rate to enhance its oral absorption. A central composite design was used to optimise the amount of Poloxamer 188 and D-α-Tocopherol-polyethylene-glycol-succinate (TPGS). The optimised TAC-loaded NLCs contain stearic acid (250 mg), Moringa oleifera (MO) seed oil (50 mg), TAC (Tacrolimus: 10 mg), TPGS (60 mg), and Poloxamer 188 (1% w/v) with a mean diameter of 393.3 ± 29.68 nm, a zeta potential of -18.3 ± 6.19 mV, high entrapment efficiency (92.12 ± 1.14% w/w), and desirability (0.989). TAC-loaded NLCs showed ∼12 times higher drug dissolution efficiency, while in-vitro anti-inflammatory studies showed ∼1.8 times lower IC50 (half-maximal inhibitory concentration) than TAC suspension. The lyophilised TAC-loaded NLCs were found to be stable after 3 months. Thus, the present study concludes the successful encapsulation of TAC in NLCs made of stearic acid and MO seed oil.

Biomaterials with antifungal strategies to fight oral infections

Oral fungal infections pose a threat to human health and increase the economic burden of oral diseases by prolonging and complicating treatment. A cost-effective strategy is to try to prevent these infections from happening in the first place. With this purpose, biomaterials with antifungal properties are a crucial element to overcome fungal infections in the oral cavity. In this review, we go through different kinds of biomaterials and coatings that can be used to functionalize them. We also review their potential as a therapeutic approach in addition to prophylaxis, by going through traditional and alternative antifungal compounds, e.g., essential oils, that could be incorporated in them, to enhance their efficacy against fungal pathogens. We aim to highlight the potential of these technologies and propose questions that need to be addressed in prospective research. Finally, we intend to concatenate the key aspects and technologies on the use of biomaterials in oral health, to create an easy to find summary of the current state-of-the-art for researchers in the field.

Design, Evaluation and Comparison of Nanostructured Lipid Carriers and Chitosan Nanoparticles as Carriers of Poorly Soluble Drugs to Develop Oral Liquid Formulations Suitable for Pediatric Use

There is a serious need of pediatric drug formulations, whose lack causes the frequent use of extemporaneous preparations obtained from adult dosage forms, with consequent safety and quality risks. Oral solutions are the best choice for pediatric patients, due to administration ease and dosage-adaptability, but their development is challenging, particularly for poorly soluble drugs. In this work, chitosan nanoparticles (CSNPs) and nanostructured lipid carriers (NLCs) were developed and evaluated as potential nanocarriers for preparing oral pediatric solutions of cefixime (poorly soluble model drug). The selected CSNPs and NLCs showed a size around 390 nm, Zeta-potential > 30 mV, and comparable entrapment efficiency (31-36%), but CSNPs had higher loading efficiency (5.2 vs. 1.4%). CSNPs maintained an almost unchanged size, homogeneity, and Zeta-potential during storage, while NLCs exhibited a marked progressive Zeta-potential decrease. Drug release from CSNPs formulations (differently from NLCs) was poorly affected by gastric pH variations, and gave rise to a more reproducible and controlled profile. This was related to their behavior in simulated gastric conditions, where CSNPs were stable, while NLCs suffered a rapid size increase, up to micrometric dimensions. Cytotoxicity studies confirmed CSNPs as the best nanocarrier, proving their complete biocompatibility, while NLCs formulations needed 1:1 dilution to obtain acceptable cell viability values.

Liposomal Amphotericin B for Treatment of Leishmaniasis: From the Identification of Critical Physicochemical Attributes to the Design of Effective Topical and Oral Formulations

The liposomal amphotericin B (AmB) formulation, AmBisome^®, still represents the best therapeutic option for cutaneous and visceral leishmaniasis. However, its clinical efficacy depends on the patient's immunological status, the clinical manifestation and the endemic region. Moreover, the need for parenteral administration, its side effects and high cost significantly limit its use in developing countries. This review reports the progress achieved thus far toward the understanding of the mechanism responsible for the reduced toxicity of liposomal AmB formulations and the factors that influence their efficacy against leishmaniasis. It also presents the recent advances in the development of more effective liposomal AmB formulations, including topical and oral liposome formulations. The critical role of the AmB aggregation state and release rate in the reduction of drug toxicity and in the drug efficacy by non-invasive routes is emphasized. This paper is expected to guide future research and development of innovative liposomal formulations of AmB.

Mucoadhesive carriers for oral drug delivery

Among the various dosage forms, oral medicine has extensive benefits including ease of administration and patients' compliance, over injectable, suppositories, ocular and nasal. Despite of extensive demand and emerging advantages, over 50% of therapeutic molecules are not available in oral form due to their physicochemical properties. More importantly, most of the biologics, proteins, peptide, and large molecular drugs are mostly available in injectable form. Conventional oral drug delivery system has limitation such as degradation and lack of stability within stomach due to presence of highly acidic gastric fluid, hinders their therapeutic efficacy and demand more frequent and higher dosing. Hence, formulation for controlled, sustained, and targeted drug delivery, need to be designed with feasibility to target the specific region of gastrointestinal (GI) tract such as stomach, small intestine, intestine lymphatic, and colon is challenging. Among various oral delivery approaches, mucoadhesive vehicles are promising and has potential for improving oral drug retention and controlled absorption to treat local diseases within the GI tract, as well systemic diseases. This review provides the overview about the challenges and opportunities to design mucoadhesive formulation for oral delivery of therapeutics in a way to target the specific region of the GI tract. Finally, we have concluded with future perspective and potential of mucoadhesive formulations for oral local and systemic delivery.

Pharmacokinetic study of AmB-NP-GR: a new granule form with amphotericin B to treat leishmaniasis and fungal infections

Amphotericin B (AmB) has been the gold standard to treat systemic fungal infections. The use of AmB is restricted to hospitals because it poses several risks, mainly risks related to its high nephrotoxicity. Given the importance of this drug in medicine, new therapeutics and AmB formulations with nanotechnological improvements are required and could bring many benefits to patients. A new drug formulation with gastro-resistant coated granules has been proposed. The lipid-based system containing AmB was produced and used as raw material in the granulation/coated process. The new developed formulation (AmB-NP-GR) was characterized by optical microscopy, granulometry, and atomic force microscopy (AFM) after disintegration test. AmB-NP-GR showed granular shape, with most granules measured between 250 and 500 µm (37 ± 7% w/w). The AFM images indicated that the granule formulation should disintegrate in the intestine, to release the lipid-based carriers, making them available for absorption and allowing them to reach the blood circulation. The developed formulation was administered to rats in a single dose of 4.0 or 8.0 mg kg^-1 and the pharmacokinetics was studied. The samples were analyzed by liquid chromatography coupled to mass spectrometry. Before the pharmacokinetic studies were conducted, the bioanalytical method was validated according to the EMA guideline and all evaluated parameters agreed with this guideline. The pharmacokinetic results showed that C_max was similar for both doses and that t_max was reached at 4-12 hours for dose of 4.0 mg kg^-1 and 4 hours for dose of 8.0 mg kg^-1. The half-life related to the dose of 8.0 mg kg^-1 increased significantly compared to the dose of 4.0 mg kg^-1 (an increase of more than 3 times). In addition, the mean residence time related to the dose of 8.0 mg kg^-1 was 4 times higher than for the lower dose. The clearance value showed to be higher for the lower dose. Together, these results provide important conclusions for experimental design of other in vivo safety and efficacy studies of AmB-NP-GR.

Development, formulation, and cellular mechanism of a lipophilic copper chelator for the treatment of Wilson's disease

Copper homeostasis is finely regulated in human to avoid any detrimental impact of free intracellular copper ions. Upon copper accumulation, biliary excretion is triggered in liver thanks to trafficking of the ATP7B copper transporter to bile canaliculi. However, in Wilson's disease this protein is mutated leading to copper accumulation. Current therapy uses Cu chelators acting extracellularly and requiring a life-long treatment with side effects. Herein, a new Cu(I) pro-chelator was encapsulated in long-term stable nanostructured lipid carriers. Cellular assays revealed that the pro-chelator protects hepatocytes against Cu-induced cell death. Besides, the cellular stresses induced by moderate copper concentrations, including protein unfolding, are counteracted by the pro-chelator. These data showed the pro-chelator efficiency to deliver intracellularly an active chelator that copes with copper stress and surpasses current and under development chelators. Although its biological activity is more mitigated, the pro-chelator nanolipid formulation led to promising results. This innovative approach is of outmost importance in the quest of better treatments for Wilson's disease.

Improved Bioavailability of Poorly Soluble Drugs through Gastrointestinal Muco-Adhesion of Lipid Nanoparticles

Gastrointestinal absorption remains indispensable in the systemic delivery of most drugs, even though it presents several challenges that, paradoxically, may also provide opportunities that can be exploited to achieve maximal bioavailability. Drug delivery systems made from nanoparticle carriers and especially, lipid carriers, have the potential to traverse gastrointestinal barriers and deploy in the lymphatic pathway, which aptly, is free from first pass via the liver. Several poorly soluble drugs have presented improved systemic bioavailability when couriered in lipid nanoparticle carriers. In this review, we propose an additional frontier to enhancing the bioavailability of poorly soluble drugs when encapsulated in lipid nano-carriers by imparting muco-adhesion to the particles through application of appropriate polymeric coating to the lipid carrier. The combined effect of gastrointestinal muco-adhesion followed by lymphatic absorption is a promising approach to improving systemic bioavailability of poorly soluble drugs following oral administration. Evidence to the potential of this approach is backed-up by recent studies within the review.

Nano Spray-Dried Drugs for Oral Administration: A Review

Spray drying is an important technology that is fast, simple, reproducible, and scalable. It has a wide application range, that is, in food, chemicals, and encapsulation of pharmaceuticals. The technology can be divided into conventional spray drying and nano spray drying. The key advantage of nano spray drying is the production of drug-loaded nanosized particles for various drug delivery applications. The recent developments in nano spray dryer technology and the market launch of the Nano Spray Dryer B-90 by Büchi Labortechnik AG in 2009 enabled the production of submicron spray-dried particles. This review focuses on nanosized drug delivery systems intended for oral administration produced by nano spray drying. First, the nano spray drying concept, the basic technologies implemented in the equipment, and the effects of the various process parameters on the final dry submicron powder properties are presented. Then, the topics of new formulation strategies of oral drugs are highlighted with examples that have entered the research literature in recent years. Next, the subjects of direct conversion of poorly water-soluble drugs, encapsulation of drugs, and drying of preformed nanoparticles are considered. Finally, topics such as morphology, particle size, size distribution, surface analysis, bioavailability, drug release, release kinetics, and solid-state characterization (by differential scanning calorimetry, X-ray diffraction, Fourier transform infrared spectroscopy, nuclear magnetic resonance) of oral drug delivery systems produced by nano spray drying are discussed. The review attempts to provide a comprehensive knowledge base with current literature and foresight to researchers working in the field of pharmaceutical technology and nanotechnology and especially in the field of nano spray drying.

Novel decorated nanostructured lipid carrier for simultaneous active targeting of three anti-cancer agents

Cancer-targeted co-delivery of therapeutic agents has been recognized as an effective strategy for increasing efficacy and reducing side effects of therapeutic agents. In this study, we used methotrexate (MTX) alone as a targeting moiety and chemotherapeutic agent and in combination with docetaxel (DTX) and doxorubicin (DOX) as chemotherapeutic agents to stop cancer cell proliferation with the aid of newly designed nanostructured lipid carriers (NLCs). The physicochemical properties of our designed nanocomplexes were evaluated by DLS, FT-IR spectroscopy, SEM, and TEM. Moreover, the targeting efficiency of the designed and synthesized nanoplatforms was evaluated on the folate receptor (FR) positive human breast cancer cell line (MCF-7) and FR negative human alveolar basal epithelial cells (A549). The NLCs/DTX/DOX/CS and NLCs/DTX/DOX/CS-MTX complexes significantly increased the cell cytotoxicity and the cell apoptosis rate. However, the complexes significantly reduced the capability of colony formation and cell migration. Our results revealed that NLCs/DTX/DOX/CS-MTX had synergistic cytotoxicity, reactive oxygen spaces, autophagy, and the apoptosis induction ability with an enhanced cellular internalization rate in FR-positive cancer cells, thorough MTX recognition capability. We conclude that the NLCs/DTX/DOX/CS-MTX complex is a new promising paradigm for breast cancer-targeted co-delivery.

Chitosan-based particulate systems for drug and vaccine delivery in the treatment and prevention of neglected tropical diseases

Neglected tropical diseases (NTDs) are a diverse group of infections which are difficult to prevent or control, affecting impoverished communities that are unique to tropical or subtropical regions. In spite of the low number of drugs that are currently used for the treatment of these diseases, progress on new drug discovery and development for NTDs is still very limited. Therefore, strategies on the development of new delivery systems for current drugs have been the main focus of formulators to provide improved efficacy and safety. In recent years, particulate delivery systems at micro- and nanosize, including polymeric micro- and nanoparticles, liposomes, solid lipid nanoparticles, metallic nanoparticles, and nanoemulsions, have been widely investigated in the treatment and control of NTDs. Among these polymers used for the preparation of such systems is chitosan, which is a marine biopolymer obtained from the shells of crustaceans. Chitosan has been investigated as a delivery system due to the versatility of its physicochemical properties as well as bioadhesive and penetration-enhancing properties. Furthermore, chitosan can be also used to improve treatment due to its bioactive properties such as antimicrobial, tissue regeneration, etc. In this review, after giving a brief introduction to neglected diseases and particulate systems developed for the treatment and control of NTDs, the chitosan-based systems will be described in more detail and the recent studies on these systems will be reviewed. Graphical abstract.

A new medium-throughput screening design approach for the development of hydroxymethylnitrofurazone (NFOH) nanostructured lipid carrier for treating leishmaniasis

Hydroxymethilnitrofurazone (NFOH) is a nitrofurazone derivative and has potential use in treating leishmaniasis. However, due to low water solubility and bioavailability, NFOH has failed in in vivo tests. Nanostructured lipid carrier (NLC) is an alternative to overcome these limitations by improving pharmacokinetics and modifying drug delivery. This work is focused on developing a novel NFOH-loaded NLC (NLC-NFOH) using a D-optimal mixture statistical design and high-pressure homogenization, for oral administration to treat leishmaniasis. The optimized NLC-NFOH consisted of Mygliol® 840, Gelucire® 50/13, and Precirol® ATO 5 as lipids. These lipids were selected using a rapid methodology Technobis Crystal 16 T M, microscopy, and DSC. Different tools for selecting lipids provided relevant scientific knowledge for the development of the NLC. NLC-NFOH presented a z-average of 198.6 ± 5.4 nm, PDI of 0.11 ± 0.01, and zeta potential of -13.7 ± 0.7 mV. A preliminary in vivo assay was performed by oral administration of NLC-NFOH (2.8 mg/kg) in one healthy male Wistar rat (341 g) by gavage. Blood from the carotid vein was collected, and the sample was analyzed by HPLC. The plasma concentration of NFOH after 5 h of oral administration was 0.22 μg/mL. This same concentration was previously found using free NFOH in the DMSO solution (200 mg/kg), which is an almost 100-fold higher dose. This study allowed a design space development approach of the first NLC-NFOH with the potential to treat leishmaniasis orally.