Treatment of Colored Effluents with Lignin-Degrading Enzymes: An Emerging Role of Marine-Derived Fungi

Novel tempo oxidized polyvinyl alcohol/ cellulose nanocrystal-based nanocomposite membrane for malachite green dye removal

In this study, in-situ modification by TEMPO oxidation was performed after nanocomposite synthesis to improve its properties toward dye molecule removal. The unoxidized and oxidized polymeric-based nanocomposite was denoted as PNC6 and PNC6O respectively. The nanocomposites were characterized using FESEM, FTIR, contact angle, XRD and BET analysis. Measurements of swelling ratio and chemical stability were also performed to provide insight into the durability of the nanocomposites. The effects of changing variables included contact duration, pH of aqueous solution, initial pollutant concentration, and temperature were observed. The kinetic study showed that the experimental data is best fitted with pseudo-second-order kinetics (R2 = 0.988 and 0.997 respectively), whereas on observing isotherm data, in both unoxidized and oxidized nanocomposite it fits well with Langmuir isotherm (R2 = 0.951 and 0.993 respectively). In addition, the effects on Gibb's free energy, Enthalpy, and Entropy were measured in terms of thermodynamic characteristics, it was established that dye molecules adsorption mechanism is endothermic and spontaneous in behaviour. To check regeneration tendency of the nanocomposite seven consecutive adsorption desorption cycles were run and about 90% and 80%, regeneration ability could be seen in an unoxidized state (PNC6) and an oxidized state (PNC6O) respectively upto 5th cycle after that the tendency get reduced. This study suggests that this novel polymeric nanocomposite can be employed as an efficient and relatively inexpensive adsorbent for dye removal from aqueous solutions.

Evaluating the efficacy of wood decay fungi and synthetic fungal consortia for simultaneous decolorization of multiple textile dyes

Wastewater from the textile industry dyeing process containing high loads of synthetic dyes leads to pollution of water with these toxic and genotoxic dyes. Much effort has been put towards developing biological systems to resolve this issue. Mycoremediation is a well-known approach using fungi to remove, degrade, or remediate pollutants and can be applied to decolorize textile dyes in industrial effluent. Fungal strains from four genera of Polyporales, namely Coriolopsis sp. TBRC 2756, Fomitopsis pinicola TBRC-BCC 30881, Rigidoporus vinctus TBRC 6770, and Trametes pocas TBRC-BCC 18705, were studied for decolorization efficiency, and R. vinctus was found to exhibit the greatest activity in removing all seven tested reactive dyes and one acid dye with a decolorization efficiency of 80% or more within 7 days under limited oxygen. This fungus simultaneously degraded multiple dyes in synthetic wastewater as well as industrial effluent from the dyeing process. To enhance the decolorization rate, various fungal consortia were formulated for testing. However, these consortia only trivially improved efficiency compared with using R. vinctus TBRC 6770 alone. Evaluation of R. vinctus TBRC 6770 decolorization ability was further performed in a 15-L bioreactor to test its ability to eliminate multiple dyes from industrial effluent. The fungus took 45 days to adapt to growth in the bioreactor and subsequently reduced dye concentration to less than 10% of the initial concentration. The following six cycles required only 4-7 days to reduce dye concentrations to less than 25%, demonstrating that the system can run efficiently for multiple cycles without the need for extra medium or other carbon sources.

Marine enzymes: Classification and application in various industries

Oceans are regarded as a plentiful and sustainable source of biological compounds. Enzymes are a group of marine biomaterials that have recently drawn more attention because they are produced in harsh environmental conditions such as high salinity, extensive pH, a wide temperature range, and high pressure. Hence, marine-derived enzymes are capable of exhibiting remarkable properties due to their unique composition. In this review, we overviewed and discussed characteristics of marine enzymes as well as the sources of marine enzymes, ranging from primitive organisms to vertebrates, and presented the importance, advantages, and challenges of using marine enzymes with a summary of their applications in a variety of industries. Current biotechnological advancements need the study of novel marine enzymes that could be applied in a variety of ways. Resources of marine enzyme can benefit greatly for biotechnological applications duo to their biocompatible, ecofriendly and high effectiveness. It is beneficial to use the unique characteristics offered by marine enzymes to either develop new processes and products or improve existing ones. As a result, marine-derived enzymes have promising potential and are an excellent candidate for a variety of biotechnology applications and a future rise in the use of marine enzymes is to be anticipated.

Marine-derived fungi as biocatalysts

Marine microorganisms account for over 90% of ocean biomass and their diversity is believed to be the result of their ability to adapt to extreme conditions of the marine environment. Biotransformations are used to produce a wide range of high-added value materials, and marine-derived fungi have proven to be a source of new enzymes, even for activities not previously discovered. This review focuses on biotransformations by fungi from marine environments, including bioremediation, from the standpoint of the chemical structure of the substrate, and covers up to September 2022.

Environmental pollution, toxicity profile, and physico-chemical and biotechnological approaches for treatment of textile wastewater

Textile industries discharges a huge quantity of unused synthetic dyes in wastewater leading to increased environmental pollution and pose a great risk to human health. Thus, a significant improvement in effluent quality is required before it is discharged into the environment. Although, several physicochemical methods have been practiced for the efficient color and dyes removal from textile effluents, these approaches have some drawbacks of greater use of expensive chemicals, low sensitivity, formation of excess sludge which also have secondary disposal problem. Thus, there is still a need for energy efficient, affordable, effective, and environmentally friendly treatment technologies. Bioremediation has been considered as a promising an upcoming active field of research for the treatment of unwanted color and target compounds from the contaminated environment. In order to efficient treatment of textile effluent, the main objective of the present study was to isolate and characterize the indigenous microbial isolates from textile industry effluents and sludge samples and investigate their dye removal and decolorization ability along with the influence of various process parameters on effluents decolorization that draining into the open environment.

Modeling and experimental validation of covalent immobilization of Trametes maxima laccase on glyoxyl and MANA-Sepharose CL 4B supports, for the use in bioconversion of residual colorants

Our novel strategy for the rational design of immobilized derivatives (RDID) is directed to predict the behavior of the protein immobilized derivative before its synthesis, by the usage of mathematic algorithms and bioinformatics tools. However, this approach needs to be validated for each target enzyme. The objective of this work was to validate the RDID strategy for covalent immobilization of the enzyme laccase from Trametes maxima MUCL 44155 on glyoxyl- and monoaminoethyl-N-aminoethyl (MANA)-Sepharose CL 4B supports. Protein surface clusters, more probable configurations of the protein-supports systems at immobilization pHs, immobilized enzyme activity, and protein load were predicted by RDID_1.0 software. Afterward, immobilization was performed and predictions were experimentally confirmed. As a result, the laccase-MANA-Sepharose CL 4B immobilized derivative is better than laccase-glyoxyl-Sepharose CL 4B in predicted immobilized derivative activity (63.6% vs. 29.5%). Activity prediction was confirmed by an experimentally expressed enzymatic activity of 68%, using 2,6-dimethoxyphenol as substrate. Experimental maximum protein load matches the estimated value (11.2 ± 1.3 vs. 12.1 protein mg/support mL). The laccase-MANA-Sepharose CL 4B biocatalyst has a high specificity for the acid blue 62 colorant. The results obtained in this work suggest the possibility of using this biocatalyst for wastewater treatment.

Biodegradation of fluorene by the newly isolated marine-derived fungus, Mucor irregularis strain bpo1 using response surface methodology

Fluorene, a low molecular weight polycyclic aromatic hydrocarbon (PAH), is of immense environmental interest because of its carcinogenicity, teratogenicity, mutagenicity, toxicity and persistence to microbial degradation. Existentially, there is paucity of information on PAH degradation by fungi isolated from marine environment. Therefore, this study investigated fluorene degradation efficiency of marine derived filamentous fungus, Mucor irregularis strain bpo1 (GenBank Accession Number: MK373020). Response Surface Methodology (RSM) using Box-Behnken Design (BBD) was successfully deployed in the optimization of process parameters (pH-7, temperature-32.5 °C, substrate concentration-100 mg L^-1 and dry weight-2 g) resulting in 81.50% fluorene degradation on 5th day. The design and regression model were found to be statistically significant, adequate and appropriate with p < 0.0001, F value= 202.39, and predicted coefficient of determination (R² =0.9991). Optimization of the vital constituents of the mineral salt medium (MSM) used for the study using RSM-Central Composite Design (CCD) resulted in 79.80% fluorene degradation rate. Enhanced fluorene degradation efficiency (82.50%) was recorded when the optimized process variables were subjected to growth-linked validation experiments. The enzyme activities revealed 87%, 59% and 31% induction of laccase, manganese peroxidase and lignin peroxidase respectively. Four metabolites; 9H-fluoren-9-one, benzene-1,2-dicarboxylic acid, 2-hydroxybenzoic acid and phenol obtained after the experiment were characterized and confirmed with GC-MS analysis. The findings revealed the promising potentials of M. irregularis in PAH degradation and by extension green remediation technology.

Halophilic archaea and their potential to generate renewable fuels and chemicals

Lignocellulosic biofuels and chemicals have great potential to reduce our dependence on fossil fuels and mitigate air pollution by cutting down on greenhouse gas emissions. Chemical, thermal, and enzymatic processes are used to release the sugars from the lignocellulosic biomass for conversion to biofuels. These processes often operate at extreme pH conditions, high salt concentrations, and/or high temperature. These harsh treatments add to the cost of the biofuels, as most known biocatalysts do not operate under these conditions. To increase the economic feasibility of biofuel production, microorganisms that thrive in extreme conditions are considered as ideal resources to generate biofuels and value-added products. Halophilic archaea (haloarchaea) are isolated from hypersaline ecosystems with high salt concentrations approaching saturation (1.5-5 M salt concentration) including environments with extremes in pH and/or temperature. The unique traits of haloarchaea and their enzymes that enable them to sustain catalytic activity in these environments make them attractive resources for use in bioconversion processes that must occur across a wide range of industrial conditions. Biocatalysts (enzymes) derived from haloarchaea occupy a unique niche in organic solvent, salt-based, and detergent industries. This review focuses on the use of haloarchaea and their enzymes to develop and improve biofuel production. The review also highlights how haloarchaea produce value-added products, such as antibiotics, carotenoids, and bioplastic precursors, and can do so using feedstocks considered "too salty" for most microbial processes including wastes from the olive-mill, shell fish, and biodiesel industries.

Microbial remediation for the removal of inorganic contaminants from treated wood: Recent trends and challenges

Owing to the seriousness of the ecological risk and human hazard of inorganic wood preservatives, their effective removal was gradually recognized. This paper details different types of wood preservatives, their perniciousness, and their potential removal alternatives, while the wood treatment process is briefly described. Among decontamination methods, microbial remediation is considered as an environmentally friendly approach with enormous potentialities over the conventional treatments. In the current review, the mechanism of bioremediation is summed up and recent advances, challenges, and future perspectives of microbial remediation are discussed. The removal of heavy metals from treated wood requires a combination of various technologies to obtain higher performance. Meanwhile, the decontaminated wood generated through bioremediation can be effectively reused.

Recent advances in removal of lignin from paper industry wastewater and its industrial applications - A review

Pulp and paper mill wastewater contains lignin related synthetic, aromatic and chlorinated chemical compounds. Extracting lignin from pulp and paper mill wastewater is one way of recovering valuable organic material. Due to its complex structure, lignin is difficult to break and provides economical and technical provocations in biomass recovery. The conventional wastewater treatment processes are seldom efficacious for the complete removal of lignin from paper mill effluents. A wide range of thermal, mechanical and physico-chemical methods have been reported for the removal of lignin. Moreover, biological method of lignin removal employed microorganisms including bacteria and fungi as a one-step treatment and/or amalgamation of various physico-chemical techniques. Compared with other methods, biological process for degradation of lignin is regarded as eco-friendly, cost-effective and sustainable. Therefore, this review will provide insight into the recent breakthroughs and future trends in lignin removal with special emphasis on biological treatment and scope of lignin utilization.

Genomic and transcriptomic perspectives on mycoremediation of polycyclic aromatic hydrocarbons

Mycoremediation holds great potential in remedying toxic environments contaminated with polyaromatic organic pollutants. To harness the natural process for practical applications, understanding the genetic and molecular basis of the remediation process is prerequisite. Compared to known bacterial degradation pathways of aromatic pollutants, however, the fungal degradation system is less studied and understanding of the genetic basis for biochemical activity is still incomplete. In this review, we surveyed recent findings from genomic and transcriptomic approaches to mycoremediation of aromatic pollutants, in company with the genomic basis of polycyclic aromatic hydrocarbon (PAH) degradation by basidiomycete fungi, Dentipellis sp. KUC8613. Unique features in the fungal degradation of PAHs were outlined by multiple cellular processes: (i) the initial oxidation of recalcitrant contaminants by various oxidoreductases including mono- and dioxygenases, (ii) the following detoxification, and (iii) the mineralization of activated pollutants that are common metabolism in many fungi. Along with the genomic data, the transcriptomic analysis not only posits a full repertoire of inducible genes that are common or specific to metabolize different PAHs but also leads to the discovery of uncharacterized genes with potential functions for bioremediation processes. In addition, the metagenomic study accesses community level of mycoremediation process to seek for the potential species or a microbial consortium in the natural environments. The comprehensive understanding of fungal degradation in multiple levels will accelerate practical application of mycoremediation. Key points • Mycoremediation of polyaromatic pollutants exploits a potent fungal degrader. • Fungal genomics provides a full repository of potential genes and enzymes. • Mycoremediation is a concerted cellular process involved with many novel genes. • Multi-omics approach enables the genome-scale reconstruction of remedying pathways.

Screening of five marine-derived fungal strains for their potential to produce oxidases with laccase activities suitable for biotechnological applications

BACKGROUND

Environmental pollution is one of the major problems that the world is facing today. Several approaches have been taken, from physical and chemical methods to biotechnological strategies (e.g. the use of oxidoreductases). Oxidative enzymes from microorganisms offer eco-friendly, cost-effective processes amenable to biotechnological applications, such as in industrial dye decolorization. The aim of this study was to screen marine-derived fungal strains isolated from three coastal areas in Tunisia to identify laccase-like activities, and to produce and characterize active cell-free supernatants of interest for dye decolorization.

RESULTS

Following the screening of 20 fungal strains isolated from the harbors of Sfax and Monastir (Tunisia), five strains were identified that displayed laccase-like activities. Molecular-based taxonomic approaches identified these strains as belonging to the species Trichoderma asperellum, Stemphylium lucomagnoense and Aspergillus nidulans. Among these five isolates, one T. asperellum strain (T. asperellum 1) gave the highest level of secreted oxidative activities, and so was chosen for further studies. Optimization of the growth medium for liquid cultures was first undertaken to improve the level of laccase-like activity in culture supernatants. Finally, the culture supernatant of T. asperellum 1 decolorized different synthetic dyes belonging to diverse dye families, in the presence or absence of 1-hydroxybenzotriazole (HBT) as a mediator.

CONCLUSIONS

The optimal growth conditions to produce laccase-like active cell-free supernatants from T. asperellum 1 were 1.8 mM CuSO₄ as an inducer, 1% NaCl to mimic a seawater environment and 3% sucrose as a carbon source. The culture supernatant of T. asperellum 1 effectively decolorized different synthetic dyes belonging to diverse chemical classes, and the presence of HBT as a mediator improved the decolorization process.

Haloferax volcanii for biotechnology applications: challenges, current state and perspectives

Haloferax volcanii is an obligate halophilic archaeon with its origin in the Dead Sea. Simple laboratory culture conditions and a wide range of genetic tools have made it a model organism for studying haloarchaeal cell biology. Halophilic enzymes of potential interest to biotechnology have opened up the application of this organism in biocatalysis, bioremediation, nanobiotechnology, bioplastics and the biofuel industry. Functionally active halophilic proteins can be easily expressed in a halophilic environment, and an extensive genetic toolkit with options for regulated protein overexpression has allowed the purification of biotechnologically important enzymes from different halophiles in H. volcanii. However, corrosion mediated damage caused to stainless-steel bioreactors by high salt concentrations and a tendency to form biofilms when cultured in high volume are some of the challenges of applying H. volcanii in biotechnology. The ability to employ expressed active proteins in immobilized cells within a porous biocompatible matrix offers new avenues for exploiting H. volcanii in biotechnology. This review critically evaluates the various application potentials, challenges and toolkits available for using this extreme halophilic organism in biotechnology.

Halophiles and Their Vast Potential in Biofuel Production

Global warming and the limitations of using fossil fuels are a main concern of all societies, and thus, the development of alternative fuel sources is crucial to improving the current global energy situation. Biofuels are known as the best alternatives of unrenewable fuels and justify increasing extensive research to develop new and less expensive methods for their production. The most frequent biofuels are bioethanol, biobutanol, biodiesel, and biogas. The production of these biofuels is the result of microbial activity on organic substrates like sugars, starch, oil crops, non-food biomasses, and agricultural and animal wastes. Several industrial production processes are carried out in the presence of high concentrations of NaCl and therefore, researchers have focused on halophiles for biofuel production. In this review, we focus on the role of halophilic microorganisms and their current utilization in the production of all types of biofuels. Also, the outstanding potential of them and their hydrolytic enzymes in the hydrolysis of different kind of biomasses and the production of biofuels are discussed.

Isolation and characterization of lignin-degrading bacterium Bacillus aryabhattai from pulp and paper mill wastewater and evaluation of its lignin-degrading potential

This study reports the degradation and decolourization capability of a manganese peroxidase enzyme producing bacterium isolated from pulp and paper mill wastewater. The isolate was identified as Bacillus aryabhattai based on biochemical analysis and 16S rRNA gene sequencing. The strain was designated MG966493. This bacterium was able to reduce 67% and 54% colour and lignin, respectively, from the pulp and paper mill wastewater after 144 h of treatment at 32 °C, pH 7.6 and 120 rpm. Further, FT-IR analysis showed that during the lignin degradation process a number of metabolites were produced comprising different functional groups such as carbonyl (C=C), carboxyl (-COOH), alkene (C=C), amines (-NH₂), sulphonic (-SO₃) and nitro (-NO₂). In addition, the SEM analysis showed that the bacterial cells exposed to pulp and paper mill wastewater have rough surfaces with reduced size as compared to the unexposed cells with smooth surfaces. This study concluded that the isolated bacterium B. aryabhattai has significant potential for the bioremediation of pulp and paper mill wastewater and thus, can be applied for their treatment at an industrial scale.

Lignolytic mushroom Lenzites elegans WDP2: Laccase production, characterization, and bioremediation of synthetic dyes

A mycoremedial study was undertaken for decolourization of synthetic dyes using wood rot fungal culture Lenzites elegans WDP2. The culture was isolated from decaying wood as fruiting body, and identified on the basis of 5.8S ITS rRNA gene sequence analysis. Qualitative plate screening of culture showed extracellular laccase and lignin peroxidase production, while only laccase enzyme was produced in higher amount (156.793 Uml^-1) in minimal salt broth medium containing glucose and veratryl alcohol. Laccase activity was increased up to 189.25 Uml^-1 after optimization of laccase production by optimization of one variable at a time approach. Molecular characterization of laccase enzyme was done using SDS PAGE and Native PAGE based isozyme analyses. The culture was able to decolorize three synthetic dying compounds (congo red, Malachite green and brilliant green) in broth media, while showed very less decolourization in plate assay. The fungal culture varied in their dye decolourizing potential in broth culture, showing 92.77%, 21.27% and 98.8% maximum decolourization of brilliant green, malachite green and congo red respectively. The congo red dye was completely bio-absorbed by fungal culture within one month. The fungal decolourized broth also revealed the extracellular laccase activity; varied from 10 Uml^-1 to 68.5 Uml^-1 in all the three cases, supports the involvement of laccase enzyme in decolorization. Phase contrast microscopy clearly revealed bio-sorption of the dyes by fungal culture into the mycelium/spores in the photomicrographs.

Polycyclic aromatic hydrocarbons degradation by marine-derived basidiomycetes: optimization of the degradation process

Pyrene and benzo[a]pyrene (BaP) are high molecular weight polycyclic aromatic hydrocarbons (PAHs) recalcitrant to microbial attack. Although studies related to the microbial degradation of PAHs have been carried out in the last decades, little is known about degradation of these environmental pollutants by fungi from marine origin. Therefore, this study aimed to select one PAHs degrader among three marine-derived basidiomycete fungi and to study its pyrene detoxification/degradation. Marasmiellus sp. CBMAI 1062 showed higher levels of pyrene and BaP degradation and was subjected to studies related to pyrene degradation optimization using experimental design, acute toxicity, organic carbon removal (TOC), and metabolite evaluation. The experimental design resulted in an efficient pyrene degradation, reducing the experiment time while the PAH concentration applied in the assays was increased. The selected fungus was able to degrade almost 100% of pyrene (0.08mgmL^-1) after 48h of incubation under saline condition, without generating toxic compounds and with a TOC reduction of 17%. Intermediate metabolites of pyrene degradation were identified, suggesting that the fungus degraded the compound via the cytochrome P450 system and epoxide hydrolases. These results highlight the relevance of marine-derived fungi in the field of PAH bioremediation, adding value to the blue biotechnology.

De novo transcriptome assembly: a new laccase multigene family from the marine-derived basidiomycete Peniophora sp. CBMAI 1063

Laccases are multicopper oxidases that are able to catalyze reactions involving a range of substrates, including phenols and amines, and this ability is related to the existence of different laccases. Basidiomycetes usually have more than one gene for laccase, but until now, this feature has not been demonstrated in a marine-derived fungus. Peniophora sp. CBMAI 1063 is a basidiomycete fungus isolated from a marine sponge that exhibits the ability to secrete significant amounts of laccase in saline conditions. In the present study, we identified laccase sequences from the transcriptome of Peniophora sp. CBMAI 1063 and used them to perform different molecular in silico analyses. The results revealed the presence of at least eight putative genes, which may encode ten different laccases with peptide lengths ranging from 482 to 588 aa and molecular weights ranging from 53.5 to 64.4 kDa. These laccases seem to perform extracellular activities, with the exception of one that may represent an intracellular laccase. The 10 predicted laccases expressed by Peniophora sp. CBMAI 1063 in laccase-induced media showed different patterns of N-glycosylation and isoelectric points and are divided into two classes based on the residue associated with the regulation of the redox potential of the enzyme. None of the predicted laccases showed more than 61% similarity to other fungal laccases. Based on the differences among the laccases expressed by Peniophora sp. CBMAI 1063, this marine-derived basidiomycete represents a valuable resource with strong potential for biotechnological exploitation.

Diversity and dynamics of the DNA- and cDNA-derived compost fungal communities throughout the commercial cultivation process for Agaricus bisporus

Commercial cultivation of the button mushroom Agaricus bisporus is performed through the inoculation of a semipasteurized composted material. Pasteurization of the compost material prior to inoculation results in a substrate with a fungal community that becomes dominated by A. bisporus. However, little is known about the composition and activity in the wider fungal community beyond the presence of A. bisporus in compost throughout the mushroom cropping process. In this study, the fungal cropping compost community was characterized by sequencing nuc rDNA ITS1-5.8S-ITS2 amplified from extractable DNA and RNA. The fungal community generated from DNA extracts identified a diverse community containing 211 unique species, although only 51 were identified from cDNA. Agaricus bisporus was found to dominate in the DNA-derived fungal community for the duration of the cropping process. However, analysis of cDNA extracts found A. bisporus to dominate only up to the first crop flush, after which activity decreased sharply and a much broader fungal community became active. This study has highlighted the diverse fungal community that is present in mushroom compost during cropping.

Establishing the Secondary Metabolite Profile of the Marine Fungus: Tolypocladium geodes sp. MF458 and Subsequent Optimisation of Bioactive Secondary Metabolite Production

As part of an international research project, the marine fungal strain collection of the Helmholtz Centre for Ocean Research (GEOMAR) research centre was analysed for secondary metabolite profiles associated with anticancer activity. Strain MF458 was identified as Tolypocladium geodes, by internal transcribed spacer region (ITS) sequence similarity and its natural product production profile. By using five different media in two conditions and two time points, we were able to identify eight natural products produced by MF458. As well as cyclosporin A (1), efrapeptin D (2), pyridoxatin (3), terricolin A (4), malettinins B and E (5 and 6), and tolypocladenols A1/A2 (8), we identified a new secondary metabolite which we termed tolypocladenol C (7). All compounds were analysed for their anticancer potential using a selection of the NCI60 cancer cell line panel, with malettinins B and E (5 and 6) being the most promising candidates. In order to obtain sufficient quantities of these compounds to start preclinical development, their production was transferred from a static flask culture to a stirred tank reactor, and fermentation medium development resulted in a nearly eight-fold increase in compound production. The strain MF458 is therefore a producer of a number of interesting and new secondary metabolites and their production levels can be readily improved to achieve higher yields.

Enhanced textile dye decolorization by marine-derived basidiomycete Peniophora sp. CBMAI 1063 using integrated statistical design

In the present study, the biotechnological potential of the marine-derived fungus Peniophora sp. CBMAI 1063 was investigated in relation to Reactive Black 5 (RB5) dye decolorization and degradation using an integrated statistical design composed of Plackett-Burman design (P&B), central composite design (CCD), and response surface methodology (RSM). RB5 dye was effectively decolorized (94 %) in saline conditions, without any detection of mutagenic compounds, and simultaneously, 57 % of total organic carbon (TOC) was removed in 7 days. The activity of lignin peroxidase (LiP) was not detected during the process. The gene expression of laccase (Lac) and manganese peroxidase (MnP) enzymes produced during the process was evaluated, and results from this experiment coupled with LC-MS analyses revealed that in the early stage of dye decolorization, a higher MnP gene expression and significant enzymatic activity was detected in Peniophora sp. CBMAI 1063 with the formation of p-Base and TAHNDS compounds. This paper reports innovative data related to the textile dye decolorization by the marine-derived basidiomycete Peniophora sp. CBMAI 1063, showing the metabolites formed and enzymatic action throughout the process in saline condition. The strategy used showed to be an efficient statistical approach that provides an attractive solution for the screening and simultaneous optimization of the degradation process.

Evaluation of bioremediation potentiality of ligninolytic Serratia liquefaciens for detoxification of pulp and paper mill effluent

Due to high pollution load and colour contributing substances, pulp and paper mill effluents cause serious aquatic and soil pollution. A lignin-degrading bacterial strain capable of decolourising Azure-B dye was identified as lignin peroxidase (LiP) producing strain LD-5. The strain was isolated from pulp and paper mill effluent contaminated site. Biochemical and 16S rDNA gene sequence analysis suggested that strain LD-5 belonged to the Serratia liquefaciens. The strain LD-5 effectively reduced pollution parameters (colour 72%, lignin 58%, COD 85% and phenol 95%) of real effluent after 144h of treatment at 30°C, pH 7.6 and 120rpm. Extracellular LiP produced by S. liquefaciens during effluent decolourisation was purified to homogeneity using ammonium sulfate (AMS) precipitation and DEAE cellulose column chromatography. The molecular weight of the purified lignin peroxidase was estimated to be ∼28kDa. Optimum pH and temperature for purified lignin peroxidase activity were determined as pH 6.0 and 40°C, respectively. Detoxified effluent was evaluated for residual toxicity by alkaline single cell (comet) gel electrophoresis (SCGE) assay using Saccharomyces cerevisiae MTCC 36 as model organism. The toxicity reduction to treated effluent was 49.4%. These findings suggest significant potential of S. liquefaciens for bioremediation of pulp and paper mill effluent.

Unravelling the Interactions between Hydrolytic and Oxidative Enzymes in Degradation of Lignocellulosic Biomass by Sporothrix carnis under Various Fermentation Conditions

The mechanism underlying the action of lignocellulolytic enzymes in biodegradation of lignocellulosic biomass remains unclear; hence, it is crucial to investigate enzymatic interactions involved in the process. In this study, degradation of corn cob by Sporothrix carnis and involvement of lignocellulolytic enzymes in biodegradation were investigated over 240 h cultivation period. About 60% degradation of corn cob was achieved by S. carnis at the end of fermentation. The yields of hydrolytic enzymes, cellulase and xylanase, were higher than oxidative enzymes, laccase and peroxidase, over 144 h fermentation period. Maximum yields of cellulase (854.4 U/mg) and xylanase (789.6 U/mg) were at 96 and 144 h, respectively. Laccase and peroxidase were produced cooperatively with maximum yields of 489.06 U/mg and 585.39 U/mg at 144 h. Drastic decline in production of cellulase at 144 h (242.01 U/mg) and xylanase at 192 h (192.2 U/mg) indicates that they play initial roles in biodegradation of lignocellulosic biomass while laccase and peroxidase play later roles. Optimal degradation of corn cob (76.6%) and production of hydrolytic and oxidative enzymes were achieved with 2.5% inoculum at pH 6.0. Results suggest synergy in interactions between the hydrolytic and oxidative enzymes which can be optimized for improved biodegradation.

Marine-derived fungi: diversity of enzymes and biotechnological applications

The ocean is considered to be a great reservoir of biodiversity. Microbial communities in marine environments are ecologically relevant as intermediaries of energy, and play an important role in nutrient regeneration cycles as decomposers of dead and decaying organic matter. In this sense, marine-derived fungi can be considered as a source of enzymes of industrial and/or environmental interest. Fungal strains isolated from different substrates, such as invertebrates, decaying wood, seawater, sediments, and mangrove detritus, have been reported to be producers of hydrolytic and/or oxidative enzymes, with alginate lyase, amylase, cellulase, chitinase, glucosidase, inulinase, keratinase, ligninase, lipase, nuclease, phytase, protease, and xylanase being among the enzymes produced by fungi of marine origin. These enzymes present temperature and pH optima ranging from 35 to 70(∘)C, and 3.0 to 11.0, respectively. High-level production in bioreactors is mainly performed using submerged-state fermentation. Certain marine-derived fungal strains present enzymes with alkaline and cold-activity characteristics, and salinity is considered an important condition in screening and production processes. The adaptability of marine-derived fungi to oceanic conditions can be considered an attractive point in the field of fungal marine biotechnology. In this review, we focus on the advances in discovering enzymes from marine-derived fungi and their biotechnological relevance.

Effect of different carbon sources on decolourisation of an industrial textile dye under alkaline-saline conditions

White-rot fungal strains of Trametes versicolor and Phanerochaete chrysosporium were selected to study the decolourisation of the textile dye, Reactive Black 5, under alkaline-saline conditions. Free and immobilised T. versicolor cells showed 100 % decolourisation in the growth medium supplemented with 15 g l(-1) NaCl, pH 9.5 at 30 °C in liquid batch culture. Continuous culture experiments were performed in a fixed-bed reactor using free and immobilised T. versicolor cells and allowed 85-100 % dye decolourisation. The immobilisation conditions for the biomass and the additional supply of carbon sources improved the decolourisation performance during a long-term trial of 40 days. Lignin peroxidase, laccase and glyoxal oxidase activities were detected during the experiments. The laccase activity varied depending on carbon source utilized and glycerol-enhanced laccase activity compared to sucrose during extended growth.

Accelerated decolorization of reactive azo dyes under saline conditions by bacteria isolated from Arabian seawater sediment

Presence of huge amount of salts in the wastewater of textile dyeing industry is one of the major limiting factors in the development of an effective biotreatment system for the removal of azo dyes from textile effluents. Bacterial spp. capable of thriving under high salt conditions could be employed for the treatment of saline dyecontaminated textile wastewaters. The present study was aimed at isolating the most efficient bacterial strains capable of decolorizing azo dyes under high saline conditions. Fiftyeight bacterial strains were isolated from seawater, seawater sediment, and saline soil, using mineral salt medium enriched with 100 mg l−1 Reactive Black-5 azo dye and 50 g NaCl l−1 salt concentration. Bacterial strains KS23 (Psychrobacter alimentarius) and KS26 (Staphylococcus equorum) isolated from seawater sediment were able to decolorize three reactive dyes including Reactive Black 5, Reactive Golden Ovifix, and Reactive Blue BRS very efficiently in liquid medium over a wide range of salt concentration (0-100 g NaCl l)⁻¹. Time required for complete decolorization of 100 mg dye l ⁻¹ varied with the type of dye and salt concentration. In general, there was an inverse linear relationship between the velocity of the decolorization reaction (V) and salt concentration. This study suggested that bacteria isolated from saline conditions such as seawater sediment could be used in designing a bioreactor for the treatment of textile effluent containing high concentration of salts.

Fungi and their role in corals and coral reef ecosystems

Fungi in coral reefs exist as endoliths, endobionts, saprotrophs and as pathogens. Although algal and fungal endoliths in corals were described way back in 1973, their role in microboring, carbonate alteration, discoloration, density banding, symbiotic or parasitic association was postulated almost 25 years later. Fungi, as pathogens in corals, have become a much discussed topic in the last 10 years. It is either due to the availability of better tools for investigations or greater awareness among the research communities. Fungi which are exclusive as endoliths (endemic) in corals or ubiquitous forms seem to play a role in coral reef system. Fungi associated with sponges and their role in production or induction of secondary metabolites in their host is of primary interest to various pharmaceutical industries and funding agencies. Fungal enzymes in degradation of coral mucus, and plant detritus hold great promise in biotechnological applications. Unravelling fungal diversity in corals and associated reef organisms using culture and culture-independent approaches is a subject gaining attention from research community world over.

Role of organic amendments on enhanced bioremediation of heavy metal(loid) contaminated soils

As land application becomes one of the important waste utilization and disposal practices, soil is increasingly being seen as a major source of metal(loid)s reaching food chain, mainly through plant uptake and animal transfer. With greater public awareness of the implications of contaminated soils on human and animal health there has been increasing interest in developing technologies to remediate contaminated sites. Bioremediation is a natural process which relies on soil microorganisms and higher plants to alter metal(loid) bioavailability and can be enhanced by addition of organic amendments to soils. Large quantities of organic amendments, such as manure compost, biosolid and municipal solid wastes are used as a source of nutrients and also as a conditioner to improve the physical properties and fertility of soils. These organic amendments that are low in metal(loid)s can be used as a sink for reducing the bioavailability of metal(loid)s in contaminated soils and sediments through their effect on the adsorption, complexation, reduction and volatilization of metal(loid)s. This review examines the mechanisms for the enhanced bioremediation of metal(loid)s by organic amendments and discusses the practical implications in relation to sequestration and bioavailability of metal(loid)s in soils.

A thermostable metal-tolerant laccase with bioremediation potential from a marine-derived fungus

Laccase, an oxidoreductive enzyme, is important in bioremediation. Although marine fungi are potential sources of enzymes for industrial applications, they have been inadequately explored. The fungus MTCC 5159, isolated from decaying mangrove wood and identified as Cerrena unicolor based on the D1/D2 region of 28S and the 18S ribosomal DNA sequence, decolorized several synthetic dyes. Partially purified laccase reduced lignin content from sugarcane bagasse pulp by 36% within 24 h at 30 degrees C. Laccase was the major lignin-degrading enzyme (approximately 24,000 U L(-1)) produced when grown in low-nitrogen medium with half-strength seawater. Three laccases, Lac I, Lac II, and Lac III, of differing molecular masses were produced. Each of these, further resolved into four isozymes by anion exchange chromatography. The N-terminal amino acid sequence of the major isozyme, Lac IId showed 70-85% homology to laccases from basidiomycetes. It contained an N-linked glycan content of 17%. The optimum pH and temperature for Lac IId were 3 and 70 degrees C, respectively, the half-life at 70 degrees C being 90 min. The enzyme was most stable at pH 9 and retained >60% of its activity up to 180 min at 50 degrees C and 60 degrees C. The enzyme was not inhibited by Pb, Fe, Ni, Li, Co, and Cd at 1 mmol. This is the first report on the characterization of thermostable metal-tolerant laccase from a marine-derived fungus with a potential for industrial application.