Human health effects of sodium azide exposure: a literature review and analysis

Label-free turn-on electrochemiluminescence assay of β-glucuronidase at single-electrode

Electrochemiluminescence (ECL) has achieved significant commercial success over the past few decades across various fields, particularly in the healthcare industry. The measurement scheme oftentimes involves target recognition elements (e.g. catching antibodies) labeled with a suitable ECL luminophore (e.g. tris(2,2'-bipyridine)ruthenium(II))). While this approach realizes the ultrasensitive detection of various biomarkers, it is somewhat complicated strategy for certain targets such as enzymes. In this study, β-glucuronidase (B-GLU), a promising biomarker and a common water/foodstuff safety indicator, was quantified by measuring the ECL signal of fluorescent product generated from non-fluorescent substrate by the B-GLU enzyme. To this end, hot electron-induced ECL of three luminophores (fluorescein, 4-methylumbelliferyl and resorufin) that are used as building blocks to synthesize various commercially available non-fluorescent substrates was compared for the first time. To increase the appeal and practicality of this approach, the common multi-well assay format was adapted to the present type ECL by carrying out the ECL reactions at single carbon black/polystyrene electrode. In this electrochemical setup, multiple cells were fabricated on the surface of a poorly conducting substrate by attaching Teflon tape with multiple holes to the substrates surface. Sample throughput time decreases considerable as target, blank and sample signals can be simultaneously obtained from the electrochemical cells when voltage is applied across the single electrode. The detection limit for B-GLU after 2 h of incubation was 0.07 U L-1 when 4-methylumbelliferyl-β-D-glucuronide was used as the fluorogenic substrate and Br- was used as the co-reactant. B-GLU recovery rates from diluted saliva with the present ECL approach were adequate (93-103 %) and similar to those obtained with the fluorescence technique.

Airbag ARDS: airbag fumes exposure leading to ARDS

We present a case of a man in his early 50s, who developed severe respiratory distress following exposure to airbag fumes after a road traffic accident. Despite initial treatment for lower respiratory tract infection, his condition worsened, necessitating intensive care unit admission and mechanical ventilation (MV). Subsequent investigations ruled out infections, autoimmune causes and lung contusion, leading to a diagnosis of chemical pneumonitis secondary to sodium azide exposure. Treatment with pulse steroids and prone positioning during MV resulted in significant clinical improvement. The patient was successfully extubated and discharged after 23 days with complete resolution of respiratory symptoms. This case underscores the importance of considering chemical pneumonitis in patients presenting with respiratory distress following airbag deployment and highlights the effective management strategies that contributed to the patient's recovery.

Quantitative tracking of nanoplastics along the food chain from lettuce (Lactuca sativa) to snails (Cantareus aspersus)

Terrestrial systems are a significant sink for plastic contamination, including nano- and microplastics (NMPs). To date, limited information is available about the transfer of NMPs up the food web via trophic transfer, however, concerns about this exposure pathway for invertebrates and higher-level organisms have been raised. We aim to examine and quantify the trophic transfer of europium doped polystyrene nanoplastics (Eu-PS; NPs) within a terrestrial food chain. The uptake of 100 nm spherical Eu-PS particles from water through the roots of the plants to the leaves and finally to garden snails (Cantareus aspersus) was assessed. Lettuce (Lactuca sativa) was cultivated in Hoagland solution spiked with different concentrations of Eu-PS (15, 150 and 1500 μg/L) for three weeks. Then, lettuce shoots were used as food for snails for 19 days at a rate of 1 g of shoots per day. The Eu-PS primarily accumulated in the lettuce roots for all treatments, with a limited transfer to the shoots (only quantifiable in the highest treatment; translocation factor: TF < 1). No detectable levels of Eu-PS were found in the snails' digestive gland; however, the Eu-PS particles were detected in their feces (trophic transfer factor: TFF > 1). Moreover, only limited effects were observed on lettuce biomass by NPs treatments. No effects of the Eu-PS particles on snails were observed, with the exception of a consistent decrease in the shell diameter. Overall, our research illustrates that NPs can be absorbed by plants through their roots, subsequently transported to the shoots. However, our findings show limited transfer of NPs into snail tissues, but direct excretion into their feces. We provide an important insight into the potential transfer within the human food chain.

Nanobioengineered Al2O3 Core-Shell Nanoparticle Preparation Using Bauhinia Variegate Plant Extract for Efficient Photocatalysis and Electrochemical Sensing

Core-shell-based nanomaterials have garnered considerable attention in the recent past not only in catalytic applications but also in their potentiality in selective and efficient sensing. Present research reports the first and successful biosynthesis of the core (c-Al2O3)-shell nanoparticles (NPs) using Bauhinia variegate blossom extract as reducing and capping agents. The synthesized c-Al2O3 NPs were characterized and utilized to fabricate nanobioengineered electrodes on indium tin oxide (ITO) substrates via electrophoretic deposition. Electrochemical analysis, including cyclic voltammetry and differential pulse voltammetry, revealed quasi-reversible processes with high electron-transfer rates (Ks = 0.66 s-1) and a diffusion coefficient (D = 5.84 × 10-2 cm2 s-1). The electrode exhibited a very high sensitivity (23.44 μA μM-1 cm-2) and a low detection limit (0.463 μM) for sodium azide (NaN3) over two linear ranges of 1-6 and 8-20 μM. Additionally, c-Al2O3 NPs demonstrated the effective photocatalytic degradation of crystal violet dye under visible light, following pseudo-first-order kinetics. The fabricated electrode showed excellent selectivity, stability, and reproducibility, highlighting its potential for environmental monitoring and clinical diagnostics.

Skin Necrosis Due to Misuse of a COVID-19 Antigen Home Test Kit: A Case Report

Background: Many people are still infected with coronavirus disease 2019 (COVID-19), and the use of home test kits for diagnosis is becoming common. The misuse of the kits may cause unexpected patient harm. Purpose: The purpose of this case study was to report a rare case of facial skin necrosis caused by contact with a reagent in a COVID-19 Ag home test kit due to misuse of the kit. Case Study: A 50-year-old male patient with pain, redness, and swelling throughout the nose, right ocular area, and forehead visited the emergency room of the hospital. The symptoms were caused by using a COVID-19 Ag home test kit in the wrong way. Initially, partial skin color change and ulcerative skin lesions with pus-like discharge were observed throughout the wound. Finally, partial skin necrosis progressed and was treated using appropriate dressing treatment, antibiotics, and steroids. Conclusion: The use of COVID-19 Ag home test kits that can be easily used will gradually increase. As in this case, it should be kept in mind that problems due to incorrect use of COVID-19 Ag home test kits can occur, and initial treatment is important to prevent systemic infection or scar formation.

Airborne metal nanoparticles released by azides detonation: determination and potential public exposure

Metal azides are highly energetic materials that release a large amount of gas upon detonation. They also release metal particles, generating an aerosol. The most common azide is sodium azide (NaN3), which is used nowadays in car airbags. If the decomposition is not complete, harmful azide particles might be inhaled. Heavy metal azides find application as a primary explosive (primer) in ammunition. Public health officials have raised concerns about heavy metal particles released during training in shooting ranges. We identify a lack of knowledge on airborne metal particles properties released from azide detonation and on the analytical methods applied to characterize them. As a case study, we detonated milligram amounts of silver azide, copper azide, and a mixture of them in a glove box. We then analyse the airborne particles with an ensemble analytical setup, able to measure real-time their particle size distribution and chemical composition. We detected spherical metal nanoparticles in the range of 2-500 nm. These findings and the developed analytical tools may allow identifying airborne nanoparticles the passenger compartments of vehicles after airbag activation as well as in indoor shooting ranges, contributing to the evaluation of public health risks.

Evaluating the Stability of Lytic and Lysogenic Bacteriophages in Various Protectants

Phage therapy has regained value as a potential alternative and a complementary anti-infective approach to antibiotics in the fight against bacterial pathogens. Due to their host specificity, non-pathogenic nature for humans, and low production cost, phages offer an effective opportunity for utilization in healthcare, agriculture, and food preservation. Well-defined storage conditions are essential for commercialization and dissemination of phage usage. For this purpose, in our study, after the isolation and characterization of two different phages, one lytic and the other lysogenic; storage and shelf-life studies of phages were evaluated in a presence of various protectants (glycerol, sodium azide, DMSO with chloroform) and without any protectant during 8-month period at four different temperatures. The short-time stability of the lytic P. syringae phage and lysogenic MRSA phage, which were determined by STEM analysis to belong to the Straboviridae and Siphoviridae families, respectively were also examined for the different temperatures and the pH levels ranging from 1.0 to 14.0. This study revealed the storage-model of phages that exhibit distinct lifecycles, for the first time and provided a theoretical basis for development and application of phages, has yielded valuable findings contributing to understanding of phage biology.

The use of urea hydrogen peroxide as an alternative N-fertilizer to reduce accumulation of arsenic in rice grains

A greenhouse experiment was conducted to examine the effects of urea hydrogen peroxide (UHP) on reducing the accumulation of As in rice grains. The results show that UHP effectively triggered Fenton-like reaction by reacting with Fe2+ in the paddy soils. This significantly inhibited the activities of As(V)-reducing microbes, causing impediment of As(V)-As(III) conversion following inundation of dryland crop soils for paddy rice cultivation. As-methylating microbes were also inhibited, adversely affecting As methylation in the soils. These processes led to the reduction in phyto-availability of As in the soil solutions for uptake by rice plant roots, and consequently reduced the accumulation of As in the rice grains. In this study, an UHP application rate of 0.0625% on three occasions (tillering, heading and filling) during the rice growth period was sufficient to lower the rice grain-borne As concentration to below 0.2 mg/kg, meeting the quality standard set by the Chinese government. No additive effect on reducing grain-borne As was observed for the joint application of UHP and biochar or biochar composite. The use of UHP for soil fertilization had no adverse impact on rice yield in comparison with the application of urea at an equal amount of nitrogen.

Internet-Purchased Sodium Azide Used in a Fatal Suicide Attempt: A Case Report and Review of the Literature

There has been a significant increase in sodium azide intoxications since the 1980s. Intoxications caused by sodium azide are becoming increasingly prevalent in the Netherlands as a result of its promotion for the purpose of self-euthanasia. The mechanism of toxicity is not completely understood but is dose-dependent. The presented case describes a suicide by sodium azide of a young woman (26 years old) with a history of depression and suicide attempts. The decedent was found in the presence of prescription medicine, including temazepam, domperidone in combination with omeprazole, and the chemical preservative sodium azide. Quantitative toxicology screening of whole blood revealed the presence of 70 µg/L temazepam (toxic range > 1000 µg/L) and 28 mg/L sodium azide (fatal range: 2.6-262 mg/L). Whole blood qualitative analysis revealed the presence of temazepam, temazepam-glucuronide, olanzapine, n-desmethylolanzapine, and acetaminophen. In circles promoting sodium azide, it is recommended to use sodium azide in combination with medications targeting sodium azide's negative effects, such as analgesics, antiemetics, and anti-anxiety drugs. The medicines recovered at the body's location, as well as the results of the toxicology screens, were consistent with the recommendations of self-euthanasia using sodium azide.

How Azide Ion/Hydrazoic Acid Passes Through Biological Membranes: An Experimental and Computational Study

Hydrazoic acid (HN₃) and its deprotonated form azide ion (N₃^-) (AHA) are toxic because they inhibit the cytochrome c oxidase complex IV (CoX IV) embedded in the inner mitochondrial membrane that forms part of the enzyme complexes involved in cellular respiration. Critical to its toxicity is the inhibition of CoX IV in the central nervous system and cardiovascular system. Hydrazoic acid is an ionizable species and its affinity for membranes, and the associated permeabilities, depend on the pH values of aqueous media on both sides of the membranes. In this article, we address the permeability of AHA through the biological membrane. In order to understand the affinity of the membrane for the neutral and ionized form of azide, we measured the octanol/water partition coefficients at pH values of 2.0 and 8.0, which are 2.01 and 0.00034, respectively. Using a Parallel Artificial Membrane Permeability Assay (PAMPA) experiment, we measured the effective permeability through the membrane, which is logP_e - 4.97 and - 5.26 for pH values of 7.4 and pH 8.0, respectively. Experimental permeability was used to validate theoretical permeability, which was estimated by numerically solving a Smoluchowski equation for AHA diffusion through the membrane. We demonstrated that the rate of permeation through the cell membrane of 8.46·10⁴ s^-1 is much higher than the rate of the chemical step of CoX IV inhibition by azide of 200 s^-1. The results of this study show that transport through the membrane does not represent the rate-limiting step and therefore does not control the rate of CoX IV inhibition in the mitochondria. However, the observed dynamics of azide poisoning is controlled by circulatory transport that takes place on a time scale of minutes.

Characterizing Three Azides for Their Potential Use as C. elegans Anesthetics

Sodium azide (NaN 3 ) is widely used as an anesthetic in the C. elegans community for studying animal behavior. It is not known whether other azides can function as anesthetics. This is quite important for the C. elegans labs in which NaN 3 is not a convenient choice, such as all the labs located in China, where NaN 3 is under tight regulation, and alternative anesthetics need to be characterized. In the present study, we focused on another three azides, potassium azide (KN 3 ), trimethylsilyl azide (TMSA), and diphenyl phosphoryl azide (DPPA), which are not regulated in China. We characterized their performance in chemotactic behavioral assays and buffer-based assays. Our results suggest that KN 3 can immobilize worms as effectively as NaN 3 in the above-mentioned assays. Therefore, we recommend KN 3 as a routine anesthetic for C. elegans labs.

The vitamin B12 analog cobinamide ameliorates azide toxicity in cells, Drosophila melanogaster, and mice

CONTEXT

The azide anion (N3-) is highly toxic. It exists most commonly as sodium azide, which is used widely and is readily available, raising the potential for occupational incidents and use as a weapon of mass destruction. Azide-poisoned patients present with vomiting, seizures, hypotension, metabolic acidosis, and coma; death can occur. No specific azide antidote exists, with treatment being solely supportive. Azide inhibits mitochondrial cytochrome c oxidase and is likely oxidized to nitric oxide in vivo. Cytochrome c oxidase inhibition depletes intracellular adenosine triphosphate and increases oxidative stress, while increased nitric oxide causes hypotension and exacerbates oxidative damage. Here, we tested whether the cobalamin (vitamin B12) analog cobinamide, a strong and versatile antioxidant that also neutralizes nitric oxide, can reverse azide toxicity in mammalian cells, Drosophila melanogaster, and mice.

RESULTS

We found cobinamide bound azide with a moderate affinity (Ka 2.87 × 105 M-1). Yet, cobinamide improved growth, increased intracellular adenosine triphosphate, and reduced apoptosis and malondialdehyde, a marker of oxidative stress, in azide-exposed cells. Cobinamide rescued Drosophila melanogaster and mice from lethal exposure to azide and was more effective than hydroxocobalamin. Azide likely generated nitric oxide in the mice, as evidenced by increased serum nitrite and nitrate, and reduced blood pressure and peripheral body temperature in the animals; the reduced temperature was likely due to reflex vasoconstriction in response to the hypotension. Cobinamide improved recovery of both blood pressure and body temperature.

CONCLUSION

We conclude cobinamide likely acted by neutralizing both oxidative stress and nitric oxide, and that it should be given further consideration as an azide antidote.

“Click-to-Clear”: A Strategy to Minimize Radioactivity from the Blood Pool Utilizing Staudinger Ligation

The availability of several bioorthogonal reactions that can proceed selectively and efficiently under physiologically relevant conditions has garnered the interest of biochemists and organic chemists alike. Bioorthogonal cleavage reactions represent the latest innovation in click chemistry. Here, we employed the Staudinger ligation reaction to release radioactivity from immunoconjugates, improving target-to-background ratios. In this proof-of-concept study, model systems, including the anti-HER2 antibody trastuzumab, radioisotope I-131, and a newly synthesized bifunctional phosphine, were used. Staudinger ligation occurred when biocompatible N-glycosyl azides reacted with this radiolabeled immunoconjugate, leading to cleavage of the radioactive label from the molecule. We demonstrated this click cleavage in vitro and in vivo. Biodistribution studies in tumor models showed that radioactivity was eliminated from the bloodstream, thereby improving tumor-to-blood ratios. SPECT imaging revealed that tumors could be visualized with enhanced clarity. Our simple approach represents a novel application of bioorthogonal click chemistry in the development of antibody-based theranostics.

Effectiveness of curcumin-based antimicrobial photodynamic therapy against Staphylococcus aureus

PURPOSE

This study investigated the effectiveness of curcumin-based antimicrobial photodynamic therapy (aPDT) against Staphylococcus aureus (S. aureus), the causative agent of ventilator-associated pneumonia.

METHODS

Curcumin was added to S. aureus culture medium at concentrations of 25, 2.5, and 0.25 µM. After 60 min (20-25°C), each culture was irradiated for 1 and 3 min, and viable bacteria were counted. Curcumin (25 µM) was also added to a bacterial suspension with D-mannitol and sodium azide; microbial counts were determined after irradiation for 3 min.

RESULTS

S. aureus was significantly reduced in the 1-min (P = 0.043) and 3-min (P = 0.011) irradiation groups in comparison to the 0-min irradiation group with 25 µM curcumin. No significant differences were observed between the curcumin alone group and the curcumin plus D-mannitol or sodium azide group.

CONCLUSION

The findings of this study indicate that prolonged exposure (≥1 min) of S. aureus to LED in 25 μM curcumin solution induces cell wall injury. Curcumin-based aPDT as an adjunct to conventional oral care, employing existing dentistry equipment, offers a promising approach that does not rely on antimicrobial drugs or allows the emergence of resistant bacterial strains. This suggests its potential role in future strategies aimed at preventing ventilator-associated pneumonia.

Review of ecotoxicological studies of widely used polystyrene nanoparticles

With polystyrene nanoparticles being widely used in various applications, there is a great need for deeper knowledge on the safety, fate and biological effects of these particles on both individual living organisms and the whole ecosystems. Due to this, there is a growing interest in performing ecotoxicological studies using model plastic nanoparticles, and consequently it generates an increasing number of published papers describing the negative impact on wildlife caused by such nanoparticles. Polystyrene is the most studied nanosized plastic, therefore this review focuses on research conducted with manufactured polystyrene nanoparticles. The aim of the present article is to provide a critical methodological outline of the existing ecotoxicological studies on the effects of polystyrene nanoparticles on aquatic organisms. Going through the published articles, we noted that particle characterization especially in the test medium, can be improved. The analysis also highlights the importance of purifying the polystyrene nanoparticles before studying its toxicity. Furthermore, the size characterization of such nanoparticles is underemphasized, and in future studies, authors should consider including more techniques to achieve this goal. Finally, short-term or direct exposure scenarios do not add the most environmentally relevant knowledge in terms of the toxicity caused by polystyrene nanoparticles.

The critical role of unique azido-substituted chloro-O-semiquinone radical intermediates in the synergistic toxicity between sodium azide and chlorocatecholic carcinogens

We have shown previously that exposing bacteria to tetrachlorocatechol (TCC) and sodium azide (NaN₃) together causes synergistic cytotoxicity in a biphasic mode. However, the underlying chemical mechanism remains unclear. In this study, an unexpected ring-contraction 3(2H)-furanone and two quinoid-compounds were identified as the major and minor reaction products, respectively; and two unusual azido-substituted chloro-O-semiquinone radicals were detected and characterized as the major radical intermediates by complementary applications of direct ESR, HPLC/ESI-Q-TOF and high-resolution MS studies with nitrogen-15 isotope-labeled NaN₃. Taken together, we proposed a novel molecular mechanism for the reaction of TCC/NaN₃: N₃^- may attack on tetrachloro-O-semiquinone radical, forming two transient 4-azido-3,5,6-trichloro- and 4,5-diazido-3,6-dichloro-O-semiquinone radicals, consecutively. The second-radical intermediate may either undergo an unusual zwitt-azido cleavage to form the less-toxic ring-contraction 3(2H)-furanone product, or further oxidize to form the more toxic quinoid-product 4-amino-5-azido-3,6-dichloro-O-benzoquinone. A good correlation was observed between the biphasic formation of this toxic quinone due to the two competing decomposition pathways of the radical intermediate and the biphasic synergism between TCC and NaN₃, which are dependent on their molar-ratios. This is the first report of detection and identification of two unique azido-substituted chloro-O-semiquinone radicals, and an unprecedented ring-contraction mechanism via an unusually mild and facile zwitt-azido rearrangement.

Zinc and ascorbic acid treatment alleviates systemic inflammation and gastrointestinal and renal oxidative stress induced by sodium azide in rats

Background

Sodium azide (NaN3) is a chemical of rapidly increasing economic importance but with high toxic attributes. In this study, the effects of zinc (Zn) and ascorbic acid (AsA) supplementation on sodium azide (NaN3)-induced toxicity in the stomach, colon and kidneys were evaluated in Wistar rats. Twenty-eight rats were randomly allocated to four experimental groups as follows: group A (control) given distilled water only; group B (NaN3 only, 20 mg/kg); group C (NaN3 + zinc sulphate, ZnSO4 80 mg/kg); and group D (NaN3 + AsA 200 mg/kg).

Results

NaN3 was found to significantly (p < 0.05) induce increases in serum nitric oxide (NO), advanced oxidation protein products (AOPP), myeloperoxidase (MPO) and total protein levels, along with significant (p < 0.05) increase in gastric, colonic and renal malondialdehyde (MDA) and protein carbonyl (PCO) levels. In addition, NaN3 induced significant (p < 0.05) reduction in superoxide dismutase (SOD), glutathione peroxidase (GPx) and glutathione S-transferase (GST) activities in the colon and kidneys. Treatment with Zn or AsA caused significant (p < 0.05) reduction in serum levels of oxidative and inflammatory markers, as well as tissue PCO and MDA levels. Moreover, co-treatment with Zn or AsA significantly (p < 0.05) restored colonic and renal levels of antioxidant enzymes, reduced glutathione and protein thiols.

Conclusions

This study shows that Zn or AsA supplementation alleviated  NaN3 toxicity by suppressing systemic inflammation and preventing oxidative damage in the stomach, colon and kidneys of rats.

Determination of Genotoxic Azide Impurity in Cilostazol API by Ion Chromatography with Matrix Elimination

Cilostazol is a commonly used active pharmaceutical ingredient (API) to treat and reduce the symptoms of intermittent claudication in peripheral vascular disease. Recently, it was found to be a potential medicine in the effective treatment of COVID-19. In addition to the positive effects of this API, genotoxic sodium azide is used in the synthesis of cilostazol that can appear in the API. In this work, a method was developed for the determination of sodium azide (as azide anion) in cilostazol API at 7.5 ppm limit level by using ion chromatography (IC) and liquid–liquid extraction (LLE) sample preparation. The liquid–liquid extraction allows the application of high sample concentrations. Because of the low limit concentration (7.5 ppm), 500 mg sample was dissolved in 5 mL solvent. By using LLE for sample preparation, the huge amount of cilostazol was omitted and column overload was avoided. The developed method was validated in accordance with the relevant guidelines. Specificity, accuracy, precision, limit of detection and limit of quantification parameters were evaluated. The calculated limit of detection was 0.52 ppm (S/N:3) and the limit of quantification was 1.73 ppm (S/N:10) for sodium azide. The recovery of the sodium azide was 102.4% and the prepared solutions were stable in the sample holder for 24 h.

Sodium azide poisoning: a narrative review

CONTEXT

Sodium azide is a highly toxic chemical. Its production has increased dramatically over the last 30 years due to its widespread use in vehicular airbags, and it is available for purchase online. Thus, accidental exposure to azide or use as a homicidal or suicidal agent could be on the rise, and secondary exposure to medical personnel can occur. No antidote exists for azide poisoning. We conducted a systematic review of azide poisoning to assess recent poisoning reports, exposure scenarios, clinical presentations, and treatment strategies.

METHODS

We searched both medical and newspaper databases to review the literature between 01/01/2000 and 12/31/2020, pairing the controlled vocabulary and keyword terms "sodium azide" or "hydrazoic acid" with terms relating to exposures and outcomes, such as "ingestion," "inhalation," "exposure," "poisoning," and "death." We included all peer-reviewed papers and news articles describing human azide poisoning cases from English and non-English publications that could be identified using English keywords. Data abstracted included the number, age, and gender of cases, mode of exposure, exposure setting, azide dose and route of exposure, symptoms, outcome, and treatment modalities.

RESULTS

We identified 663 peer-reviewed papers and 303 newspaper articles. After removing duplicated and non-qualifying sources, 54 publications were reviewed describing 156 cases, yielding an average of 7.8 reported azide poisoning cases per year. This rate is three times higher than in a previous review covering the period of 1927 to 1999. Poisoning occurred most commonly in laboratory workers, during secondary exposure of medical personnel, or from a ripped airbag. Hypotension occurred commonly, in some cases requiring vasopressors and one patient received an intra-aortic ballon pump. Gastric lavage and/or activated charcoal were used for oral azide ingestion, and sodium nitrite, sodium thiosulfate, and/or hydroxocobalamin were used in severely poisoned patients.

CONCLUSIONS

Recent increases in azide poisoning reports may stem from greater commercial use and availability. Treatment of systemic poisoning may require aggressive hemodynamic support due to profound hypotension. Based on mechanistic considerations, hydroxocobalamin is a rational choice for treating azide poisoning.

The Dynamic SecYEG Translocon

The spatial and temporal coordination of protein transport is an essential cornerstone of the bacterial adaptation to different environmental conditions. By adjusting the protein composition of extra-cytosolic compartments, like the inner and outer membranes or the periplasmic space, protein transport mechanisms help shaping protein homeostasis in response to various metabolic cues. The universally conserved SecYEG translocon acts at the center of bacterial protein transport and mediates the translocation of newly synthesized proteins into and across the cytoplasmic membrane. The ability of the SecYEG translocon to transport an enormous variety of different substrates is in part determined by its ability to interact with multiple targeting factors, chaperones and accessory proteins. These interactions are crucial for the assisted passage of newly synthesized proteins from the cytosol into the different bacterial compartments. In this review, we summarize the current knowledge about SecYEG-mediated protein transport, primarily in the model organism Escherichia coli, and describe the dynamic interaction of the SecYEG translocon with its multiple partner proteins. We furthermore highlight how protein transport is regulated and explore recent developments in using the SecYEG translocon as an antimicrobial target.

Toxicological analysis of azide and cyanide for azide intoxications using gas chromatography

Azide is a highly toxic chemical agent to human being. Accidental, but also intentional exposure to azide occurs. To be able to confirm azide ingestion, we developed a method to identify and quantify azide in biological matrices. Cyanide was included in the method to evaluate suggested in vivo production of cyanide after azide ingestion. Azide in biological matrices was first derivatized by propionic anhydride to form propionyl azide. Simultaneously, cyanide was converted into hydrogen cyanide. After thermal rearrangement of propionyl azide, ethyl isocyanate was formed, separated together with hydrogen cyanide by gas chromatography (GC) and detected using a nitrogen phosphorous detector (NPD). The method was linear from 1.0‐100 µg/mL for both analytes, and azide was stable in human plasma at −20°C for at least 49 days. Azide was measured in the gastric content of two cases of suspected azide ingestion (case 1:1.2 mg/mL, case 2:1.5 mg/mL). Cyanide was only identified in the gastric content of case 1 (approximately 1.4 µg/mL). Furthermore, azide was quantified in plasma (19 µg/mL), serum (24 µg/mL), cell pellet (21 µg/mL) and urine (3.0 µg/mL) of case 2. This method can be used to confirm azide and cyanide exposure, and azide concentrations can be quantified in several biological matrices.

C3V symmetric tripodal molecular pocket for linear anions: Selective colorimetric detection of azide through N4-Cu-π···hole interactions

Tris(3-amino propyl)amine (TRPN) based C₃v symmetric tripodal molecular pocket, L has been prepared and mono copper complex of L, (1) having Cu-N₄-π··· hole as recognizing elements, becoming a potential and selective colorimetric chemo sensor for perfect linear recognition of N₃^-, generate a Cu-NNN- π··· hole unit inside the tripodal pocket. Systematic spectrometric and naked-eye colorimetric studies reveal that, this chemo sensor is also colorimetrically recognizing the cyanide ion by its cavity via Cu-N₄-π···hole interactions; nevertheless, when azide anion is entering as a guest into the molecular pocket of 1 which is already hosted cyanide anion, then host displaces cyanide ion, subsequently azide is getting inside the cavity. The strength of the copper complex, 1 towards azide and cyanide are found to be 2.36 × 10³M^-1, and 1.87 × 10³ M^-1 respectively in 7:3 acetonitrile:water solvent medium. Further, the ability of cyanide displacement by azide in complex 1 is found to be 2.53 × 10³ M^-1. To the best of our knowledge, this is the first example of naked-eye detection of azide via cyanide displacement assay by a tripodal receptor.

Surface Grafting of Reverse Osmosis Membrane with Chlorhexidine Using Biopolymer Alginate Dialdehyde as a Facile Green Platform for In Situ Biofouling Control

We report a new robust and green facile platform for nonoxidizing chemical grafting to simultaneously improve antifouling and antibacterial properties of thin film composite (TFC) polyamide (PA) reverse osmosis (RO) membranes. In this work, alginate dialdehyde (ADA) was used as a green platform to graft chlorhexidine (CH), a nonoxidizing chemical, on TFC-RO membrane surface. A synergistic effect due to ADA and CH grafting was revealed. The modified membrane surfaces were characterized using XPS, FT-IR, AFM, SEM-EDS, contact angle, and zeta potential analysis. A simple two-step Schiff base reaction was performed. Improved salt rejection performances were observed for the grafted PA membranes at the expense of negligible flux drop for the CH-ADA-PA membranes (38 to 42 L m^-2 h^-1) compared with the pristine PA membrane (45 L m^-2 h^-1). All the CH-ADA-PA membranes had excellent antibacterial activity against E. coli along with a highly superior resistance to the formation of biofilms. Organic fouling behaviors with a protein (bovine serum albumin, BSA) and a surfactant (dodecyl trimethylammonium bromide, DTAB) were investigated as typical foulants for the grafted PA membranes. The results indicated that the CH-ADA-PA membranes showed the best antifouling performance followed by the ADA-PA membranes, the pristine membrane being the most inferior. Hence, these results pave the way for a new robust and green bioinspired route for practical application in RO membrane fouling control.

A Comparison of Potential Azide Antidotes in a Mouse Model

Three cobalt-containing macrocyclic compounds previously shown to antagonize cyanide toxicity have been comparatively evaluated for the amelioration of sublethal azide toxicity in juvenile (7-8 weeks) Swiss-Webster mice. The lowest effective doses were determined for hydroxocobalamin, a cobalt porphyrin, and a cobalt-Schiff base macrocycle by giving the antidotes 5 min prior to the toxicant, 27 mg (415 μmol) /kg sodium azide. Both male and female mice were evaluated for their response to the toxicant as well as the antidotes, and no significant differences were noted once weight differences were taken into account. Two of the three compounds significantly decreased the recovery time of azide-intoxicated mice at 10 min after the administration of sodium azide, as determined by a behavioral test (pole climbing). Additionally, azide was determined to cause a several degree drop (∼3 °C) in measured tail temperature, and warming the mice led to a more rapid recovery. The mice were also shown to recover more rapidly when given sodium nitrite, 24 mg (350 μmol)/kg, 5 min after the toxicant; this treatment also suppressed the azide-induced tail temperature decrease. Electron paramagnetic resonance (EPR) measurements of mouse blood treated with sodium azide demonstrated the presence of nitrosylhemoglobin at levels of 10-20 μM which persisted for ∼300 min. The presence of the methemoglobin azide adduct was also detected by EPR at a maximum level of ∼300 μM, but these signals disappeared around 200 min after the administration of azide. The treatment of mice with ¹⁵N sodium azide proved that the nitrosylhemoglobin was a product of the administered azide by the appearance of a two-line hyperfine (due to the ¹⁵N) in the EPR spectrum of mouse blood.

A Cobalt Schiff-Base Complex as a Putative Therapeutic for Azide Poisoning

There is presently no antidote available to treat azide poisoning. Here, the Schiff-base compound Co(II)-2,12-dimethyl-3,7,11,17-tetraazabicyclo-[11.3.1]heptadeca-1(17)2,11,13,15-pentaenyl dibromide (Co(II)N₄[11.3.1]) is investigated to determine if it has the capability to antagonize azide toxicity through a decorporation mechanism. The stopped-flow kinetics of azide binding to Co(II)N₄[11.3.1] in the absence of oxygen exhibited three experimentally observable phases: I (fast); II (intermediate); and III (slow). The intermediate phase II accounted for ∼70% of the overall absorbance changes, representing the major process observed, with second-order rate constants of 29 (±4) M^-1 s^-1 at 25 °C and 70 (±10) M^-1 s^-1 at 37 °C. The data demonstrated pH independence of the reaction around neutrality, suggesting the unprotonated azide anion to be the attacking species. The binding of azide to Co(II)N₄[11.3.1] appears to have a complicated mechanism leading to less than ideal antidotal capability; nonetheless, this cobalt complex does protect against azide intoxication. Administration of Co(II)N₄[11.3.1] at 5 min post sodium azide injection (ip) to mice resulted in a substantial decrease of righting-recovery times, 12 (±4) min, compared to controls, 40 (±8) min. In addition, only two out of seven mice "knocked down" when the antidote was administered compared to the controls given toxicant only (100% knockdown).

Toxic Site Identification Program in Azerbaijan

The need to protect communities from hazardous waste is an important agenda for any nation. Although pollutant management and policy development are attempted in many developing countries, it is not always successful due to limited funds, project resources, and access to trained experts to conduct toxic site identification projects. For this reason, Pure Earth created the Toxic Site Identification Program (TSIP). The goal of the TSIP program is to provide reliable information and data that identifies location of toxic sites and the level of toxic severity. TSIP is significant because it provides developing countries a database of ranked toxic sites identified as hazardous risk to human health. For example, Azerbaijan is one of the most polluted post-Soviet nations, but has limited resources to address and manage its polluted sites. The Azerbaijani TSIP database is the first reliable data source that identifies hazardous pollutants in the country. Our study is significant because it discusses how the TSIP labels and ranks the level of toxic severity to human health. It is also the first data source in Azerbaijan that identifies which Soviet legacy toxic sites are affecting local communities. Although our study is specific to Azerbaijan, the TSIP method can be applied to nations with similar data limitations and the need for a database that identifies country specific environmental and hazardous locations. The data sampling method and results are mapped and accompanied by tables of the collected pollutant types to identify communities at greatest health-risk to legacy toxic sites.

Towards Safer Primers: A Review

Primers are used to reliably initiate a secondary explosive in a wide range of industrial and defence applications. However, established primer technologies pose both direct and indirect risks to health and safety. This review analyses a new generation of primer materials and ignition control mechanisms that have been developed to address these risks in firearms. Electrically or optically initiated metal, oxide and semiconductor-based devices show promise as alternatives for heavy metal percussive primers. The prospects for wider use of low-cost, safe, reliable and non-toxic primers are discussed in view of these developments.

Neuroprotective Role of Selected Antioxidant Agents in Preventing Cisplatin-Induced Damage of Human Neurons In Vitro

Chemotherapy-induced peripheral neuropathy (CIPN) is a side effect of platinum-based chemotherapy and decreases the quality of life of cancer patients. We compared neuroprotective properties of several agents using an in vitro model of terminally differentiated human cells NT2-N derived from cell line NT2/D1. Sodium azide and an active metabolite of amifostine (WR1065) increase cell viability in simultaneous treatment with cisplatin. In addition, WR1065 protects the non-dividing neurons by decreasing cisplatin caused oxidative stress and apoptosis. Accumulation of Pt in cisplatin-treated cells was heterogeneous, but the frequency and concentration of Pt in cells were lowered in the presence of WR1065 as shown by X-ray fluorescence microscopy (XFM). Transition metals accumulation accompanied Pt increase in cells; this effect was equally diminished in the presence of WR1065. To analyze possible chemical modulation of Pt-DNA bonds, we examined the platinum LIII near edge spectrum by X-ray absorption spectroscopy. The spectrum found in cisplatin-DNA samples is altered differently by the addition of either WR1065 or sodium azide. Importantly, a similar change in Pt edge spectra was noted in cells treated with cisplatin and WR1065. Therefore, amifostine should be reconsidered as a candidate for treatments that reduce or prevent CIPN.

The UCD nanosafety workshop (03 December 2018): towards developing a consensus on safe handling of nanomaterials within the Irish university labs and beyond - a report

Careful handling of the nanomaterials (NMs) in research labs is crucial to ensure a safe working environment. As the largest university in Ireland, University College Dublin (UCD) has invested significant resources to update researchers working with NMs. Due to sizes often <100 nm, the NMs including nanoparticles, harbor unprecedented materialistic properties, for example, enhanced reactivity, conductivity, fluorescence, etc. which albeit conferring the NMs an edge over bulk materials regarding the applied aspects; depending on the dose, also render them to be toxic. Thus, a set of regulatory guidelines have emerged regarding safe handling of the NMs within occupational set-ups. Unfortunately, the current regulations based on the toxic chemicals and carcinogens are often confusing, lack clarity, and difficult to apply for the NMs. As a research-intensive university, a diverse range of research activities occur within the UCD labs, and it is difficult, at times impossible, for the UCD Safety, Insurance, Operational Risk & Compliance (SIRC) office to develop a set of common guidelines and cater throughout all its labs conducting research with the NMs. Hence, a necessity for dialog and exchange of ideas was felt across the UCD which encouraged the researchers including early stage researchers (e.g. PhDs, Postdocs) from multiple schools to participate in a workshop held on the 03 December 2018. The workshop tried to follow a pragmatic approach, where apart from discussing both the in vitro and in vivo scenarios, practical cases simulating situations faced frequently in the labs were discussed. This report summarizes the findings made during the workshop by this emerging critical mass in UCD.

Screen-printed Microsensors Using Polyoctyl-thiophene (POT) Conducting Polymer As Solid Transducer for Ultratrace Determination of Azides

Two novel all-solid-state potentiometric sensors for the determination of azide ion are prepared and described here for the first time. The sensors are based on the use of iron II-phthalocyanine (Fe-PC) neutral carrier complex and nitron-azide ion-pair complex (Nit-N₃⁻) as active recognition selective receptors, tetradodecylammonium tetrakis(4-chlorophenyl) borate (ETH 500) as lipophilic cationic additives and poly(octylthiophene) (POT) as the solid contact material on carbon screen-printed devices made from a ceramic substrate. The solid-contact material (POT) is placed on a carbon substrate (2 mm diameter) by drop-casting, followed, after drying, by coating with a plasticized PVC membrane containing the recognition sensing complexes. Over the pH range 6-9, the sensors display fast (< 10 s), linear potentiometric response for 1.0 × 10⁻²–1.0 × 10⁻⁷ M azide with low detection limit of 1.0 × 10⁻⁷ and 7.7 × 10⁻⁸ M (i.e., 6.2–4.8 ng/ml) for Fe-PC/POT/and Nit-N₃⁻/POT based sensors, respectively. The high potential stability and sensitivity of the proposed sensors are confirmed by electrochemical impedance spectroscopy (EIS) and constant-current chronopotentiometry measurement techniques. Strong membrane adhesion and absence of delamination of the membrane, due to possible formation of a water film between the recognition membranes and the electron conductor are also verified. The proposed sensors are successfully applied for azide quantification in synthetic primer mixture samples. Advantages offered by these sensors are the robustness, ease of fabrication, simple operation, stable potential response, high selectivity, good sensitivity and low cost.

A unique benzimidazole-naphthalene hybrid molecule for independent detection of Zn2+ and N3- ions: Experimental and theoretical investigations

Single crystal X-ray structurally characterized benzimidazole-naphthalene hybrid (NABI) functions as a unique dual analyte sensor that can detect Zn²⁺ cation and N₃^- anion independently. The NABI forms chelate with Zn²⁺ to inhibit internal charge transfer (ICT) and CHN isomerisation resulting chelation enhanced fluorescence (CHEF). On the other hand, the sensing of N₃^- is based on formation of supramolecular H-bonded rigid assembly. The association constant of NABI for Zn²⁺ and N₃^- ions are 19 × 10⁴ M^-1 and 11 × 10² M^-1, respectively. Corresponding limit of detections (LOD) are 6.85 × 10^-8 and 1.82 × 10^-7 M, respectively. NABI efficiently detects intracellular Zn²⁺ and N₃^- ions with no cytotoxicity on J774A.1cells under fluorescence microscope. DFT studies unlock underlying spectroscopic properties of free NABI and Zn²⁺/N₃^- bound forms.

Sodium azide induces mitochondria‑mediated apoptosis in PC12 cells through Pgc‑1α‑associated signaling pathway

Sodium azide (NaN3), an inhibitor of cytochrome oxidase, induces the release of excitotoxins via an energy impairment and this, in turn, results in neurodegeneration. The present study aimed to investigate the toxic effects NaN3 on apoptosis of PC12 cells and its mechanism of action in peroxisome proliferator‑activated receptor γ co‑activator 1‑α (Pgc‑1α)‑associated signaling pathways. To induce apoptosis, PC12 cells were exposed to NaN3 (0, 5, 10, 20, 40 and 80 mM) for 12, 24, 48 and 72 h. Cell viability was determined by CCK‑8 assay. DAPI staining was employed to additionally examine apoptotic cells and their nuclear changes. Production of reactive oxygen species (ROS), mitochondrial membrane potential (ΔΨm) and apoptotic rate were also assessed by flow cytometry. Cellular ATP content was estimated by firefly luciferase assay. In addition, the expression levels of B‑cell lymphoma 2 (Bcl‑2), Bcl‑2‑associated X protein (Bax), phosphorylated (p)‑Ca2+/calmodulin‑dependent protein kinase (CaMK), p‑p38 mitogen‑activated protein kinase (p38 MAPK), Pgc‑1α, nuclear respiratory factor (Nrf)‑1, mitochondrial transcription factor A (Tfam), p‑extracellular signal‑regulated kinase (Erk)1/2, Nrf‑2 and complex IV (Cox IV) were determined by western blot analysis. The data suggested that NaN3 may induce PC12 cell injury and dose‑dependently decrease the cell viability. The expression levels of pro‑apoptotic proteins Bax and cytochrome c were upregulated, while the expression levels of anti‑apoptotic proteins procaspase‑3 and Bcl‑2 were downregulated. In addition, the phosphorylation of MAPK and Ca2+/calmodulin‑dependent protein kinase II (CaMKⅡ) family members including pan‑calcineurin A was increased, in particular the ratios of p‑p38/p38 and p‑CaMKⅡ/CaMKⅡ. However, the expression levels of Pgc‑1α and its associated proteins, including Nrf‑1/2, Tfam and p‑Erk1/2 were decreased. In addition, mitochondria were the target organelles of NaN3‑induced toxicity in PC12 cells, which moderated the dissipation of ΔΨm, preserved the cellular ATP content, promoted the production of ROS and increased the apoptotic rate. These results suggested that NaN3 induced cell death in PC12 cells via Pgc‑1α‑associated signaling pathways and provided a theoretical basis for additional investigation of the neurotoxic mechanism of NaN3, with applications in neurodegenerative disorders.

On-Board Pneumatic Pressure Generation Methods for Soft Robotics Applications

The design and construction of a soft robot are challenging tasks on their own. When the robot is supposed to operate without a tether, it becomes even more demanding. While a tethered operation is sufficient for a stationary use, it is impractical for wearable robots or performing tasks that demand a high mobility. Choosing and implementing an on-board pneumatic pressure source are particularly complex tasks. There are several different pressure generation methods to choose from, each with very different properties and ways of implementation. This review paper is written with the intention of informing about all pressure generation methods available in the field of soft robotics and providing an overview of the abilities and properties of each method. Nine different methods are described regarding their working principle, pressure generation behavior, energetic considerations, safety aspects, and suitability for soft robotics applications. All presented methods are evaluated in the most important categories for soft robotics pressure sources and compared to each other qualitatively and quantitatively as far as possible. The aim of the results presented is to simplify the choice of a suitable pressure generation method when designing an on-board pressure source for a soft robot.

A microfluidic microinjector for toxicological and developmental studies in Drosophila embryos

Microinjection is an established and reliable method to deliver biological reagents such as transgenic constructs and drugs, to specific locations inside organisms such as the Drosophila embryo and C. elegans worm. In this paper, a simple compliant mechanism based PDMS-microinjection system has been demonstrated. Unlike conventional microinjectors, this unique system could allow one to precisely insert a long taper microneedle laterally and at various positions inside the length of the Drosophila embryo (up to 250 μm) with the resolution of 5 μm. Volumes as low as 30 pL with accuracy of ±10 pL were delivered inside the embryo via pressure pulses. The device has been used to study the effect of toxins on cardiogenesis in Drosophila embryos. Using this device, we demonstrate that the cardioblast (CB) migration velocity is modified in a dose sensitive manner to varying doses of injected sodium azide (NaN₃) and, for the first time, quantify the effect of the toxin on heart assembly. Injection with 40 pL of NaN₃ was shown to decrease CB migration velocity and filopodia number at concentrations above 10 mM, while embryos injected with the tracer Rhodamine B (0 mM NaN₃) displayed no significant difference when compared to uninjected embryos. This device can be potentially used for other embryonic assays, which require accurate delivery of the reagents to a specific location within the embryo.

Biosensor Technology Reveals the Disruption of the Endothelial Barrier Function and the Subsequent Death of Blood Brain Barrier Endothelial Cells to Sodium Azide and Its Gaseous Products

Herein we demonstrate the sensitive nature of human blood-brain barrier (BBB) endothelial cells to sodium azide and its gaseous product. Sodium azide is known to be acutely cytotoxic at low millimolar concentrations, hence its use as a biological preservative (e.g., in antibodies). Loss of barrier integrity was noticed in experiments using Electric Cell-substrate Impedance Sensing (ECIS) biosensor technology, to measure endothelial barrier integrity continuously in real-time. Initially the effect of sodium azide was observed as an artefact where it was present in antibodies being employed in neutralisation experiments. This was confirmed where antibody clones that were azide-free did not mediate loss of barrier function. A delayed loss of barrier function in neighbouring wells implied the influence of a liberated gaseous product. ECIS technology demonstrated that the BBB endothelial cells had a lower level of direct sensitivity to sodium azide of ~3 µM. Evidence of gaseous toxicity was consistently observed at 30 µM and above, with disrupted barrier function and cell death in neighbouring wells. We highlight the ability of this cellular biosensor technology to reveal both the direct and gaseous toxicity mediated by sodium azide. The sensitivity and temporal dimension of ECIS technology was instrumental in these observations. These findings have substantial implications for the wide use of sodium azide in biological reagents, raising issues of their application in live-cell assays and with regard to the protection of the user. This research also has wider relevance highlighting the sensitivity of brain endothelial cells to a known mitochondrial disruptor. It is logical to hypothesise that BBB endothelial dysfunction due to mitochondrial dys-regulation could have an important but underappreciated role in a range of neurological diseases.

Neuroprotective effects of hydrogen sulfide on sodium azide‑induced autophagic cell death in PC12 cells

Sodium azide (NaN3) is a chemical of rapidly growing commercial importance. It is very acutely toxic and inhibits cytochrome oxidase (COX) by binding irreversibly to the heme cofactor. A previous study from our group demonstrated that hydrogen sulfide (H2S), the third endogenous gaseous mediator identified, had protective effects against neuronal damage induced by traumatic brain injury (TBI). It is well‑known that TBI can reduce the activity of COX and have detrimental effects on the central nervous system metabolism. Therefore, in the present study, it was hypothesized that H2S may provide neuroprotection against NaN3 toxicity. The current results revealed that NaN3 treatment induced non‑apoptotic cell death, namely autophagic cell death, in PC12 cells. Expression of the endogenous H2S‑producing enzymes, cystathionine‑β‑synthase and 3‑mercaptopyruvate sulfurtransferase, decreased in a dose‑dependent manner following NaN3 treatment. Pretreatment with H2S markedly attenuated the NaN3‑induced cell viability loss and autophagic cell death in a dose‑dependent manner. The present study suggests that H2S‑based strategies may have future potential in the prevention and/or therapy of neuronal damage following NaN3 exposure.

Mdivi‑1 attenuates sodium azide‑induced apoptosis in H9c2 cardiac muscle cells

The aim of the current study was to investigate the effect of mitochondrial division inhibitor 1 (Mdivi-1) in sodium azide-induced cell death in H9c2 cardiac muscle cells. Mdivi-1 is a key inhibitor of the mitochondrial division protein dynamin-related protein 1 (Drp1). Mdivi-1 was added to H9c2 cells for 3 h, after which, the cells were treated with sodium azide for 24 h. Cell viability was measured by Cell Counting kit-8 assay. DAPI staining was used to observe nuclear morphology changes by microscopy. To further investigate the role of mitochondria in sodium azide-induced cell death, mitochondrial membrane potential (ΔΨm) and the cellular ATP content were determined by JC-1 staining and ATP-dependent bioluminescence assay, respectively. Reactive oxygen species (ROS) production was also assessed by use of the specific probe 2′,7′-dichlorodihydrofluorescein diacetate. In addition, the expression of Drp1 and of the apoptosis-related proteins BCL2 apoptosis regulator (Bcl-2), and BCL2 associated X (Bax) was determined by western blotting. The present findings demonstrated that pretreatment with Mdivi-1 attenuated sodium azide-induced H9c2 cell death. Mdivi-1 pretreatment also inhibited the sodium azide-induced downregulation of Bcl-2 expression and upregulation of Bax and Drp1 expression. In addition, the mitochondrion was revealed to be the target organelle of sodium azide-induced toxicity in H9c2 cells. Mdivi-1 pretreatment moderated the dissipation of ΔΨm, preserved the cellular ATP contents and suppressed the production of ROS. The results suggested that the mechanism of sodium azide-induced cell death in H9c2 cells may involve the mitochondria-dependent apoptotic pathway. The present results indicated that Mdivi-1 may have a cardioprotective effect against sodium azide-induced apoptosis in H9c2 cardiac muscle cells.

Ameliorative effect of vitamin E and selenium against oxidative stress induced by sodium azide in liver, kidney, testis and heart of male mice

The study purported to define the effects of daily administration of vitamin E (Vit E) and selenium (Se) on antioxidant enzyme activity in mice treated with high doses of sodium azide (SA). Male mice were randomly split into nine groups. Groups 1, 2 and 3 were injected daily with saline, Vit E, and Se, respectively, while groups 4, 5 and 6 administrated with different doses of SA (low, medium and high, respectively). The mice in groups 7, 8 and 9 received 100mg/kg Vit E, 17.5mg/kg Se, and a combination of Vit E and Se, respectively before the SA-treatment. Hepatic, renal, testis and heart, antioxidant enzymes as well as levels of lipid peroxidation and total antioxidant capacity levels were determined. Vit E alone affected on the antioxidant parameters of the examined tissues. Se had a preventive effect on the decrease of antioxidant parameters caused by SA and improved the diminished activities of all of them. The study demonstrates that a high dose of SA may alter the effects of normal level antioxidant/oxidative status of male mice and that Se is effective in reducing the SA-damage. Se acts as a synergistic agent with the effect of Vit E in various damaged caused by SA.