1
|
Boffa L, Binello A, Cravotto G. Efficient Capture of Cannabis Terpenes in Olive Oil during Microwave-Assisted Cannabinoid Decarboxylation. Molecules 2024; 29:899. [PMID: 38398651 PMCID: PMC10893475 DOI: 10.3390/molecules29040899] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/07/2023] [Revised: 02/13/2024] [Accepted: 02/15/2024] [Indexed: 02/25/2024] Open
Abstract
The development of selective extraction protocols for Cannabis-inflorescence constituents is still a significant challenge. The characteristic Cannabis fragrance can be mainly ascribed to monoterpenes, sesquiterpenes and oxygenated terpenoids. This work investigates the entrapment of Cannabis terpenes in olive oil from inflorescences via stripping under mild vacuum during the rapid microwave-assisted decarboxylation of cannabinoids (MW, 120 °C, 30 min) and after subsequent extraction of cannabinoids (60 and 100 °C). The profiles of the volatiles collected in the oil samples before and after the extraction step were evaluated using static headspace solid-phase microextraction (HS-SPME), followed by gas chromatography coupled to mass spectrometry (GC-MS). Between the three fractions obtained, the first shows the highest volatile content (~37,400 mg/kg oil), with α-pinene, β-pinene, β-myrcene, limonene and trans-β-caryophyllene as the main components. The MW-assisted extraction at 60 and 100 °C of inflorescences using the collected oil fractions allowed an increase of 70% and 86% of total terpene content, respectively. Considering the initial terpene amount of 91,324.7 ± 2774.4 mg/kg dry inflorescences, the percentage of recovery after decarboxylation was close to 58% (mainly monoterpenes), while it reached nearly 100% (including sesquiterpenes) after extraction. The selective and efficient extraction of volatile compounds, while avoiding direct contact between the matrix and extraction solvents, paves the way for specific applications in various aromatic plants. In this context, aromatized extracts can be employed to create innovative Cannabis-based products within the hemp processing industry, as well as in perfumery, cosmetics, dietary supplements, food, and the pharmaceutical industry.
Collapse
Affiliation(s)
| | | | - Giancarlo Cravotto
- Dipartimento di Scienza e Tecnologia del Farmaco, University of Turin, Via P. Giuria 9, 10125 Turin, Italy; (L.B.); (A.B.)
| |
Collapse
|
2
|
Mileti O, Baldino N, Paleologo MFO, Lupi FR, Marra M, Iacopetta D, Gabriele D. Oil Extraction from Hemp Plant as a Potential Source of Cannabidiol for Healthy Protein Foods. Antioxidants (Basel) 2023; 12:1950. [PMID: 38001803 PMCID: PMC10669131 DOI: 10.3390/antiox12111950] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/22/2023] [Revised: 10/23/2023] [Accepted: 10/27/2023] [Indexed: 11/26/2023] Open
Abstract
In recent years, the increasing demand for alternative foods has shifted research toward new sources enriched with nutraceutical molecules. It is well known that many diseases are caused by oxidative stress; thus, the supplementation of antioxidants has been proposed to reduce it. Cannabis sativa L. is an interesting species that could provide an alternative source of antioxidants. This work aimed to investigate the possibility of optimizing the yield of cannabidiol (CBD) and recovering it from residual biomass (stalks), valorizing the residual biomass, and using this for protein bar preparation. Different extraction methods were used, and High-Pressure Liquid Chromatography (HPLC) analysis was used to analyze the extracts. Antioxidant power was investigated using the 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azinobis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) assays. The best results in terms of CBD yield were obtained via dynamic maceration after decarboxylation with a quantity of 26.7 ± 2 mgCBD/graw material from inflorescences. The extract also shows good antioxidant power with an IC50 value of 38.1 ± 1.1 µg/mL measured using the DPPH assay. The CBD extract was added to the hemp oil to obtain dough for protein bars. The doughs were studied by taking rheological and technological measurements, and it was found that the protein bars could provide an excellent means for the consumption of products enriched with antioxidants because their CBD anti-inflammatory activity is preserved after cooking.
Collapse
Affiliation(s)
- Olga Mileti
- Department of Information, Modeling, Electronics and System Engineering (D.I.M.E.S.), University of Calabria, Via P. Bucci, Cubo 39C, 87036 Arcavacata di Rende, Cosenza, Italy; (O.M.); (M.F.O.P.); (F.R.L.); (D.G.)
| | - Noemi Baldino
- Department of Information, Modeling, Electronics and System Engineering (D.I.M.E.S.), University of Calabria, Via P. Bucci, Cubo 39C, 87036 Arcavacata di Rende, Cosenza, Italy; (O.M.); (M.F.O.P.); (F.R.L.); (D.G.)
| | - Mario F. O. Paleologo
- Department of Information, Modeling, Electronics and System Engineering (D.I.M.E.S.), University of Calabria, Via P. Bucci, Cubo 39C, 87036 Arcavacata di Rende, Cosenza, Italy; (O.M.); (M.F.O.P.); (F.R.L.); (D.G.)
| | - Francesca R. Lupi
- Department of Information, Modeling, Electronics and System Engineering (D.I.M.E.S.), University of Calabria, Via P. Bucci, Cubo 39C, 87036 Arcavacata di Rende, Cosenza, Italy; (O.M.); (M.F.O.P.); (F.R.L.); (D.G.)
| | - Maria Marra
- Department of Pharmacy, Health and Nutritional Sciences, University of Calabria, Via P. Bucci, 87036 Arcavacata di Rende, Cosenza, Italy (D.I.)
| | - Domenico Iacopetta
- Department of Pharmacy, Health and Nutritional Sciences, University of Calabria, Via P. Bucci, 87036 Arcavacata di Rende, Cosenza, Italy (D.I.)
| | - Domenico Gabriele
- Department of Information, Modeling, Electronics and System Engineering (D.I.M.E.S.), University of Calabria, Via P. Bucci, Cubo 39C, 87036 Arcavacata di Rende, Cosenza, Italy; (O.M.); (M.F.O.P.); (F.R.L.); (D.G.)
| |
Collapse
|
3
|
de Aguiar AC, Vardanega R, Viganó J, Silva EK. Supercritical Carbon Dioxide Technology for Recovering Valuable Phytochemicals from Cannabis sativa L. and Valorization of Its Biomass for Food Applications. Molecules 2023; 28:molecules28093849. [PMID: 37175258 PMCID: PMC10180460 DOI: 10.3390/molecules28093849] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/24/2023] [Revised: 04/28/2023] [Accepted: 04/29/2023] [Indexed: 05/15/2023] Open
Abstract
Supercritical carbon dioxide (CO2) extraction techniques meet all-new consumer market demands for health-promoting phytochemical compound-rich extracts produced from green and sustainable technology. In this regard, this review is dedicated to discussing is the promise of integrating high-pressure CO2 technologies into the Cannabis sativa L. processing chain to valorize its valuable pharmaceutical properties and food biomass. To do this, the cannabis plant, cannabinoids, and endocannabinoid system were reviewed to understand their therapeutic and side effects. The supercritical fluid extraction (SFE) technique was presented as a smart alternative to producing cannabis bioproducts. The impact of SFE operating conditions on cannabis compound extraction was examined for aerial parts (inflorescences, stems, and leaves), seeds, and byproducts. Furthermore, the opportunities of using non-thermal supercritical CO2 processing on cannabis biomass were addressed for industrial hemp valorization, focusing on its biorefinery to simultaneously produce cannabidiol and new ingredients for food applications as plant-based products.
Collapse
Affiliation(s)
- Ana Carolina de Aguiar
- Centro de Ciências da Natureza, Universidade Federal de São Carlos, Rod. Lauri Simões de Barros, km 12-SP 189, Buri 18290-000, SP, Brazil
- School of Food Engineering, University of Campinas, Campinas 13083-970, SP, Brazil
| | - Renata Vardanega
- Centre of Biological Engineering, University of Minho, 4710-057 Braga, Portugal
| | - Juliane Viganó
- Centro de Ciências da Natureza, Universidade Federal de São Carlos, Rod. Lauri Simões de Barros, km 12-SP 189, Buri 18290-000, SP, Brazil
| | - Eric Keven Silva
- School of Food Engineering, University of Campinas, Campinas 13083-970, SP, Brazil
| |
Collapse
|
4
|
Suárez-Jacobo Á, Díaz Pacheco A, Bonales-Alatorre E, Castillo-Herrera GA, García-Fajardo JA. Cannabis Extraction Technologies: Impact of Research and Value Addition in Latin America. Molecules 2023; 28:molecules28072895. [PMID: 37049659 PMCID: PMC10095677 DOI: 10.3390/molecules28072895] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/10/2023] [Revised: 03/10/2023] [Accepted: 03/16/2023] [Indexed: 04/14/2023] Open
Abstract
The Cannabis genus of plants has been widely used in different cultures for various purposes. It is separated into three main species: sativa, indica, and ruderalis. In ancient practices, the plant was used as a multipurpose crop and valued for its fiber, food, and medicinal uses. Since methodologies for the extraction, processing, and identification of components have become available, medical, and food applications have been increasing, allowing potential development in the pharmaceutical and healthy functional food industries. Although the growing legalization and adoption of cannabis for the treatment of diseases are key factors pushing the growth of its market, the biggest challenge is to obtain higher-quality products in a time- and cost-effective fashion, making the process of extraction and separation an essential step. Latin American countries exhibit great knowledge of extraction technologies; nevertheless, it is still necessary to verify whether production costs are economically profitable. In addition, there has been an increase in commercial cannabis products that may or may not be allowed, with or without quality fact sheets, which can pose health risks. Hence, legalization is mandatory and urgent for the rest of Latin American countries. In this article, the phytochemical compounds (cannabinoids, terpenes, and phenolic compounds), the current status of legalization, extraction techniques, and research advances in cannabis in Latin America are reviewed.
Collapse
Affiliation(s)
- Ángela Suárez-Jacobo
- Tecnología Alimentaria, Centro de Investigación y Asistencia en Tecnología y Diseño del Estado de Jalisco, Zapopan 45019, Mexico
| | - Adrián Díaz Pacheco
- Unidad Profesional Interdisciplinaria de Ingeniería Campus Tlaxcala del Instituto Politécnico Nacional, Tlaxcala 90000, Mexico
| | - Edgar Bonales-Alatorre
- Centro Universitario de Investigaciones Biomédicas, Universidad de Colima, Colima 28045, Mexico
| | - Gustavo Adolfo Castillo-Herrera
- Tecnología Alimentaria, Centro de Investigación y Asistencia en Tecnología y Diseño del Estado de Jalisco, Zapopan 45019, Mexico
| | - Jorge Alberto García-Fajardo
- Subsede Noreste, Centro de Investigación y Asistencia en Tecnología y Diseño del Estado de Jalisco, Parque de Investigación e Innovación Tecnológica, Apodaca 66628, Mexico
| |
Collapse
|
5
|
Sainz Martinez A, Lanaridi O, Stagel K, Halbwirth H, Schnürch M, Bica-Schröder K. Extraction techniques for bioactive compounds of cannabis. Nat Prod Rep 2023; 40:676-717. [PMID: 36625451 DOI: 10.1039/d2np00059h] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023]
Abstract
Historically, cannabis has always constituted a component of the civilized world; archaeological discoveries indicate that it is one of the oldest crops, while, up until the 19th century, cannabis fibers were extensively used in a variety of applications, and its seeds comprised a part of human and livestock nutrition. Additional evidence supports its exploitation for medicinal purposes in the ancient world. The cultivation of cannabis gradually declined as hemp fibers gave way to synthetic fibers, while the intoxicating ability of THC eventually overshadowed the extensive potential of cannabis. Nevertheless, the proven value of certain non-intoxicating cannabinoids, such as CBD and CBN, has recently given rise to an entire market which promotes cannabis-based products. An increase in the research for recovery and exploitation of beneficial cannabinoids has also been observed, with more than 10 000 peer-reviewed research articles published annually. In the present review, a brief overview of the history of cannabis is given. A look into the classification approaches of cannabis plants/species as well as the associated nomenclature is provided, followed by a description of their chemical characteristics and their medically valuable components. The application areas could not be absent from the present review. Still, the main focus of the review is the discussion of work conducted in the field of extraction of valuable bioactive compounds from cannabis. We conclude with a summary of the current status and outlook on the topics that future research should address.
Collapse
Affiliation(s)
- Aitor Sainz Martinez
- Institute of Applied Synthetic Chemistry, TU Wien, Getreidemarkt 9/163, Vienna, Austria.
| | - Olga Lanaridi
- Institute of Applied Synthetic Chemistry, TU Wien, Getreidemarkt 9/163, Vienna, Austria.
| | - Kristof Stagel
- Institute of Applied Synthetic Chemistry, TU Wien, Getreidemarkt 9/163, Vienna, Austria.
| | - Heidi Halbwirth
- Institute of Chemical, Environmental and Bioscience Engineering, TU Wien, Getreidemarkt 9/166, Vienna, Austria
| | - Michael Schnürch
- Institute of Applied Synthetic Chemistry, TU Wien, Getreidemarkt 9/163, Vienna, Austria.
| | | |
Collapse
|
6
|
Yang F, Fu D, Li P, Sui X, Xie Y, Chi J, Liu J, Huang B. Magnetic Molecularly Imprinted Polymers for the Separation and Enrichment of Cannabidiol from Hemp Leaf Samples. ACS OMEGA 2023; 8:1240-1248. [PMID: 36643476 PMCID: PMC9835775 DOI: 10.1021/acsomega.2c06649] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/15/2022] [Accepted: 12/07/2022] [Indexed: 06/17/2023]
Abstract
Cannabidiol (CBD) has attracted immense attention due to its excellent clinical effects in the treatment of various diseases. However, rapid and accurate extraction of CBD from hemp plant concentrates remains a challenge. Thus, novel magnetic molecularly imprinted polymers (CBD-MMIPs) with specific recognizing capability for CBD were synthesized using ethylene glycol dimethacrylate as the cross-linker, CBD as the template, methacrylic acid as the functional monomer, azobisisobutyronitrile as the initiator, and Fe3O4 nanoparticles modified with SiO2 as the magnetic carrier. The morphological, magnetic, and adsorption properties of obtained CBD-MMIPs were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry, surface area and porosity analyses, and various adsorption experiments. The results showed that the CBD-MMIPs had selective specificity and high adsorption capacity for CBD. The adsorption of CBD by CBD-MMIPs could reach equilibrium in a short time (30 min), and the maximum adsorption capacity was as high as 26.51 mg/g. The specific recognition and selectivity properties of CBD-MMIPs to CBD were significantly higher than that of other structural analogues, and the regeneration tests established that the CBD-MMIPs had good recyclability. Furthermore, the CBD-MMIPs could be successfully used as an adsorbent to the extraction of CBD from hemp leaf sample concentrates with high recovery efficiencies (93.46-97.40%).
Collapse
|
7
|
Ultrasound-Assisted Extraction of Cannabinoids from Cannabis Sativa for Medicinal Purpose. Pharmaceutics 2022; 14:pharmaceutics14122718. [PMID: 36559212 PMCID: PMC9785504 DOI: 10.3390/pharmaceutics14122718] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/03/2022] [Revised: 11/27/2022] [Accepted: 12/01/2022] [Indexed: 12/07/2022] Open
Abstract
Over the past 20 years, the interest in Cannabis oily extracts for medicinal use compounded in pharmacy has consistently grown, along with the need to have preparations of adequate quality. Hot maceration (M) is the most frequently used method to compound oily solutions. In this work, we systematically studied the possibility of using an ultrasonic homogenizer and a sonotrode (US) as an alternative extraction method. Oily solutions were prepared using two available varieties of Cannabis for medicinal use, called FM2 and Bedrocan. All preparations resulted with an equivalent content in CBD and THC, with the advantage of a faster process using US. In particular, 10 min sonication at the amplitude optimized for the sonotrode used (2 or 7 mm) provides not statistically different total Δ9-tetrahydrocannabinol (M-FM2: 0.26 ± 0.02 % w/w; US-FM2: 0.19 ± 0.004 % w/w; M-Bedrocan: 1.83 ± 0.17 % w/w; US-Bedrocan: 1.98 ± 0.01 % w/w) and total cannabidiol (M-FM2: 0.59 ± 0.04 % w/w; US-FM2: 0.58 ± 0.01 % w/w) amounts extracted in refined olive oil. It can therefore be confirmed that sonotrode is an efficient and fast extraction technique and its use is without negative consequence on the solvent properties. Despite DSC evidencing that both maceration and sonication modify the Tonset and enthalpy of the event at about -10 °C, the qualitative characteristics of the oil remained constant for the two treatments and similar to the starting material.
Collapse
|
8
|
Extraction, Characterization, and Chitosan Microencapsulation of Bioactive Compounds from Cannabis sativa L., Cannabis indica L., and Mitragyna speiosa K. Antioxidants (Basel) 2022; 11:antiox11112103. [PMID: 36358475 PMCID: PMC9686816 DOI: 10.3390/antiox11112103] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/29/2022] [Revised: 10/17/2022] [Accepted: 10/19/2022] [Indexed: 11/17/2022] Open
Abstract
The objective of the research was to investigate the bioactive compounds of herbal plant leaves by microencapsulation technique for future application as a feed additive. In this experiment, three herbal plant leaves, namely Cannabis sativa L., Cannabis indica L., and Mitragyna speiosa K., were comparatively investigated using different methods to extract their bioactive compounds. Two methods were used to extract the bioactive compounds: microwave extraction (water-heating transferred) and maceration extraction (methanol extracted). The results obtained using microwave extraction revealed that the total polyphenolic and flavonoid contents and antioxidant capacity were significantly higher and stronger, respectively, than those produced by the maceration extraction method (p < 0.05). Furthermore, the spray-drying technique was employed to enhance the extracted compounds by encapsulation with chitosan through ionic gelation properties. The physical characteristics of chitosan-encapsulated substrates were examined under a scanning electron microscope (SEM) and were as microparticle size (1.45 to 11.0 µm). The encapsulation efficiency of the bioactive compounds was found to be 99.7, 82.3, and 54.6% for microencapsulated M. speiosa, C. indica, and C. sativa, respectively. Therefore, microwave treatment prior to chitosan encapsulation of leaf extracts resulted in increased recovery of bioactive compound encroachment.
Collapse
|
9
|
Simple Extraction of Cannabinoids from Female Inflorescences of Hemp ( Cannabis sativa L.). MOLECULES (BASEL, SWITZERLAND) 2022; 27:molecules27185868. [PMID: 36144607 PMCID: PMC9504406 DOI: 10.3390/molecules27185868] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/17/2022] [Revised: 09/07/2022] [Accepted: 09/08/2022] [Indexed: 11/25/2022]
Abstract
The high interest in non-psychoactive cannabidiol increases the need for efficient and straightforward cannabidiol (CBD) extraction methods. The research aimed to compare simple methods of cannabinoid extraction that do not require advanced laboratory equipment. This work assesses the content of total CBD and Δ9-tetrahydrocannabinol (Δ9-THC) in popular solvents such as water and ethanol extracts. Hemp raw material was analyzed with Gas Chromatography with a Flame Ionization Detector (GC-FID), while extracts were tested by High-Performance Liquid Chromatography (HPLC). The female inflorescences of three varieties of industrial hemp were tested: Futura 75, KC Dora, and Tygra (different sowing and N fertilization densities). Tygra (T/10/30) showed the highest content of CBD (0.064%) in water extracts. However, in 80% tincture from Futura 75 (F/30/30), a higher CBD content of 1.393% was observed. The use of 96% ethanol for extraction and ultrasound enabled the highest CBD content to be obtained: 2.682% in Futura 75 (F/30/30). Cold water extraction showed no effect on Δ9-THC content, while hot water extraction increased content from 0.001% in KC Dora to 0.002% in Futura 75 (F/30/30) and Tygra, but the changes were statistically insignificant. Application of 80% ethanol revealed the significantly highest content of Δ9-THC in KC Dora, from 0.026% (K/30/90) to 0.057% (K/30/30), as well as in Tygra (T/30/30) (0.036%) and Futura 75 (F/30/30) (0.048%). The use of ethanol extraction in combination with ultrasound could be an efficient method of obtaining cannabinoids.
Collapse
|
10
|
Factors that Impact the Pharmacokinetic and Pharmacodynamic Effects of Cannabis: a Review of Human Laboratory Studies. CURRENT ADDICTION REPORTS 2022. [DOI: 10.1007/s40429-022-00429-4] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
11
|
Analytical method validation for assay determination of cannabidiol and tetrahydrocannabinol in hemp oil infused products by RP-HPLC. Sci Rep 2022; 12:12453. [PMID: 35864137 PMCID: PMC9304360 DOI: 10.1038/s41598-022-13737-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/17/2022] [Accepted: 05/04/2022] [Indexed: 11/24/2022] Open
Abstract
A simple quantitative reverse phase high performance liquid chromatographic (RP-HPLC) method has been developed and validated for assay determination of cannabidiol and tetrahydrocannabinol in hemp oil infused products. The RP-HPLC method was developed and optimized for the mobile phase composition, flow rate, column selection and detector wavelength. An isocratic elution of samples were performed on SOLAS 100 Å C18 150 mm × 4.6 mm, 5 μm column with a mobile phase containing 75/25 acetonitrile/water v/v, with a flow rate of 1.5 mL/min by using an ultraviolet–visible (UV/Vis) detector operating at 214 nm. The RP-HPLC method was validated to meet regulatory requirements which covers specificity, accuracy, range, linearity, precision, system suitability and robustness. The validated assay test method was applied successfully to quantify cannabidiol and tetrahydrocannabinol in commercial hemp oil infused products such as tablets, soft gel capsules, plant extract oils, oral drops, tincture, and beverage enhancers. All the test results were found acceptable as per ICH guidelines, and this confirmed the feasibility of this method for its intended use in regular quality control and assay of cannabidiol and tetrahydrocannabinol in hemp oil infused products.
Collapse
|
12
|
Gouvêa-Silva JG, Costa-Oliveira CD, Ramos YJ, Mantovanelli DF, Cardoso MS, Viana-Oliveira LD, Costa JL, Moreira DDL, Maciel-Magalhães M. Is There Enough Knowledge to Standardize a Cannabis sativa L. Medicinal Oil Preparation with a High Content of Cannabinoids? Cannabis Cannabinoid Res 2022. [PMID: 35763833 DOI: 10.1089/can.2022.0076] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022] Open
Abstract
Introduction: Cannabis sativa L. medicinal oils are good therapeutic options due to their wide spectrum of pharmacological applications and the easy adjustment of individual doses. The lack of standardization of methodology in the preparation of medicinal oil using the Cannabis crude extract results in elevated variability of cannabinoid concentration in the final product. The elevated variability impairs the understanding of beneficial and adverse effects related to dose-response pharmacological activities. Objective: This study aimed to conduct a review on the current methods of Cannabis oil preparation present in the literature, to demonstrate the most appropriate methodologies to ensure a product with high content of cannabinoids and terpenes. Results: The decarboxylation stage is essential for the conversion of acid cannabinoids into neutral cannabinoids, which are substances with the highest bioavailability. Lower temperatures for longer periods of time instead of high temperatures in less time are highly recommended to ensure that all the acidic cannabinoids have passed through decarboxylation. For the guarantee of a high terpene content, the separate addition of essential oil to the fixed oil prepared from the crude extract should be considered. Ultrasound-assisted extraction is one of the best performing methodologies because it is cheaper than other techniques, such as supercritical fluid extraction, besides that, ultrasound extraction is effective in short extraction times and uses small amounts of solvent when compared with other techniques. Conclusion: Although the literature about the methods of preparation of Cannabis medicinal oil is scarce, it is possible to standardize an optimized, low-cost, and effective Cannabis extractive methodology from the results found in the literature; however, this will depend on new research for methodological validation.
Collapse
Affiliation(s)
- João Gabriel Gouvêa-Silva
- Instituto de Pesquisas Jardim Botânico do Rio de Janeiro, Rio de Janeiro, Brazil.,APEPI-Associação de Apoio à Pesquisa e à Pacientes de Cannabis Medicinal, Rio de Janeiro, Brazil.,Farmanguinhos, Fundação Oswaldo Cruz, Rio de Janeiro, Brazil.,Instituto de Biologia Roberto Alcantara Gomes, Universidade do Estado do Rio de Janeiro, Rio de Janeiro, Brazil
| | - Claudete da Costa-Oliveira
- Instituto de Pesquisas Jardim Botânico do Rio de Janeiro, Rio de Janeiro, Brazil.,APEPI-Associação de Apoio à Pesquisa e à Pacientes de Cannabis Medicinal, Rio de Janeiro, Brazil.,Farmanguinhos, Fundação Oswaldo Cruz, Rio de Janeiro, Brazil
| | - Ygor Jessé Ramos
- Instituto de Pesquisas Jardim Botânico do Rio de Janeiro, Rio de Janeiro, Brazil.,Farmanguinhos, Fundação Oswaldo Cruz, Rio de Janeiro, Brazil.,Instituto de Biologia Roberto Alcantara Gomes, Universidade do Estado do Rio de Janeiro, Rio de Janeiro, Brazil
| | | | | | | | - Jose Luiz Costa
- Faculdade de Ciências Farmacêuticas, Universidade Estadual de Campinas, Campinas, Brazil
| | - Davyson de Lima Moreira
- Instituto de Pesquisas Jardim Botânico do Rio de Janeiro, Rio de Janeiro, Brazil.,Farmanguinhos, Fundação Oswaldo Cruz, Rio de Janeiro, Brazil.,Instituto de Biologia Roberto Alcantara Gomes, Universidade do Estado do Rio de Janeiro, Rio de Janeiro, Brazil
| | | |
Collapse
|
13
|
Optimization through a Box–Behnken Experimental Design of the Microwave-Assisted Extraction of the Psychoactive Compounds in Hallucinogenic Fungi (Psylocibe cubensis). J Fungi (Basel) 2022; 8:jof8060598. [PMID: 35736081 PMCID: PMC9225378 DOI: 10.3390/jof8060598] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/19/2022] [Revised: 05/29/2022] [Accepted: 05/31/2022] [Indexed: 11/17/2022] Open
Abstract
Hallucinogenic fungi, mainly those from the Psilocybe genus, are being increasingly consumed even though there is no control on their culture conditions. Due to the therapeutic potential as antidepressants and anxiolytics of the alkaloids that they produce (psilocin and psilocybin), some form of control on their production would be highly recommended. Prior to identifying their optimal culture condition, a methodology that allows their study is required. Microwave-assisted extraction method (MAE) is a technique that has proven its efficiency to extract different compounds from solid matrices. For this reason, this study intends to optimize a MAE method to extract the alkaloids found in Psylocibe cubensis. A surface-response Box–Behnken design has been employed to optimize such extraction method and significantly reduce time and other resources in the extraction process. Based on the Box–Behnken design, 50 °C temperature, 60% methanol as extraction solvent, 0.6 g:10 mL sample mass:solvent ratio and 5 min extraction time, were established as optimal conditions. These mild conditions, combined with a rapid and efficient UHPLC analysis result in a practical and economical methodology for the extraction of psilocin and psilocybin from Psylocibe cubensis.
Collapse
|
14
|
Pattnaik F, Nanda S, Mohanty S, Dalai AK, Kumar V, Ponnusamy SK, Naik S. Cannabis: Chemistry, extraction and therapeutic applications. CHEMOSPHERE 2022; 289:133012. [PMID: 34838836 DOI: 10.1016/j.chemosphere.2021.133012] [Citation(s) in RCA: 30] [Impact Index Per Article: 15.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/07/2021] [Revised: 11/01/2021] [Accepted: 11/18/2021] [Indexed: 05/27/2023]
Abstract
Cannabis, a genus of perennial indigenous plants is well known for its recreational and medicinal activities. Cannabis and its derivatives have potential therapeutic activities to treat epilepsy, anxiety, depression, tumors, cancer, Alzheimer's disease, Parkinson's disease, to name a few. This article reviews some recent literature on the bioactive constituents of Cannabis, commonly known as phytocannabinoids, their interactions with the different cannabinoids and non-cannabinoid receptors as well as the significances of these interactions in treating various diseases and syndromes. The biochemistry of some notable cannabinoids such as tetrahydrocannabinol, cannabidiol, cannabinol, cannabigerol, cannabichromene and their carboxylic acid derivatives is explained in the context of therapeutic activities. The medicinal features of Cannabis-derived terpenes are elucidated for treating several neuro and non-neuro disorders. Different extraction techniques to recover cannabinoids are systematically discussed. Besides the medicinal activities, the traditional and recreational utilities of Cannabis and its derivatives are presented. A brief note on the legalization of Cannabis-derived products is provided. This review provides comprehensive knowledge about the medicinal properties, recreational usage, extraction techniques, legalization and some prospects of cannabinoids and terpenes extracted from Cannabis.
Collapse
Affiliation(s)
- Falguni Pattnaik
- Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi, India; Department of Chemical and Biological Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada
| | - Sonil Nanda
- Department of Chemical and Biological Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada
| | | | - Ajay K Dalai
- Department of Chemical and Biological Engineering, University of Saskatchewan, Saskatoon, Saskatchewan, Canada.
| | - Vivek Kumar
- Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi, India
| | - Senthil Kumar Ponnusamy
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam, Tamil Nadu, India
| | - Satyanarayan Naik
- Centre for Rural Development and Technology, Indian Institute of Technology Delhi, New Delhi, India
| |
Collapse
|
15
|
Fractional Factorial Design Study for the Extraction of Cannabinoids from CBD-Dominant Cannabis Flowers by Supercritical Carbon Dioxide. Processes (Basel) 2022. [DOI: 10.3390/pr10010093] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/14/2023] Open
Abstract
The optimization of the supercritical fluid extraction (SFE) of cannabinoids, using supercritical carbon dioxide (scCO2), was investigated in a fractional factorial design study. It is hypothesized that four main parameters (temperature, pressure, dry flower weight, and extraction time) play an important role. Therefore, these parameters were screened at predetermined low, medium, and high relative levels. The density of scCO2 was used as a factor for the extraction of cannabinoids by changing the pressure and temperature. The robustness of the mathematical model was also evaluated by regression analysis. The quantification of major (cannabidiol (CBD), cannabidiolic acid (CBDA), delta 9-tetrahydrocannabinol (Δ9-THC), delta 8-tetrahydrocannabinol (Δ8-THC), and delta 9-tetrahydrocannabinol acid (THCA-A)) and minor (cannabidivann (CBDV), tetrahydrocannabivann (THCV), cannabigerolic acid (CBG), cannabigerol (CBGA), cannabinol (CBN), and cannabichomere (CBC)) cannabinoids in the scCO2 extract was performed by RP-HPLC analysis. From the model response, it was identified that long extraction time is a significant parameter to obtain a high yield of cannabinoids in the scCO2 extract. Higher relative concentrations of CBD(A) (0.78 and 2.41% w/w, respectively) and THC(A) (0.084 and 0.048% w/w, respectively) were found when extraction was performed at high relative pressures and temperatures (250 bar and 45 °C). The higher yield of CBD(A) compared to THC(A) can be attributed to the extract being a CBD-dominant cannabis strain. The study revealed that conventional organic solvent extraction, e.g., ethanol gives a marginally higher yield of cannabinoids from the extract compared to scCO2 extraction. However, scCO2 extraction generates a cleaner (chlorophyll-free) and organic solvent-free extract, which requires less downstream processing, such as purification from waxes and chlorophyll.
Collapse
|
16
|
Kubachka KM, Wilson RA. Elemental Analysis of Tetrahydrocannabinol and Nicotine E-Liquids Related to EVALI. ACS OMEGA 2021; 6:32090-32100. [PMID: 34870030 PMCID: PMC8638013 DOI: 10.1021/acsomega.1c04868] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/03/2021] [Accepted: 10/27/2021] [Indexed: 06/13/2023]
Abstract
During the e-cigarette, or vaping, product use-associated lung injury (EVALI) investigation, the U.S. FDA's Forensic Chemistry Center (FCC) received numerous sample submissions from various states and other sources. Many of these products were linked directly to patients, while others were not; both categories included used and unused products. Elemental analysis using inductively coupled plasma mass spectrometry (ICP-MS) preceded by microwave-assisted decomposition was carried out on the cartridge contents of 65 of these submitted samples. Challenges encountered included limited sample, high sample viscosity, and adhesion, which necessitated sample preparation techniques not commonly used during routine elemental analysis. The elemental concentrations of contaminants including Pb, As, Cd, Cr, Ni, Cu, and Sn in tetrahydrocannabinol (THC) e-liquids associated with EVALI were determined. Nicotine e-liquid samples collected alongside the THC e-liquid samples were analyzed in tandem during method development. Several THC e-liquid samples contained Pb greater than 0.5 μg/g, while others had part per million levels of Ni, Cu, and/or Cr. This study presents the first detailed report of elemental concentrations in multiple THC e-liquid samples including those from informal/illicit sources and also delves into the method considerations needed for testing a viscous, hydrophobic sample matrix in limited quantity.
Collapse
|
17
|
Pepe M, Hesami M, Small F, Jones AMP. Comparative Analysis of Machine Learning and Evolutionary Optimization Algorithms for Precision Micropropagation of Cannabis sativa: Prediction and Validation of in vitro Shoot Growth and Development Based on the Optimization of Light and Carbohydrate Sources. FRONTIERS IN PLANT SCIENCE 2021; 12:757869. [PMID: 34745189 PMCID: PMC8566924 DOI: 10.3389/fpls.2021.757869] [Citation(s) in RCA: 22] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/12/2021] [Accepted: 09/30/2021] [Indexed: 05/03/2023]
Abstract
Micropropagation techniques offer opportunity to proliferate, maintain, and study dynamic plant responses in highly controlled environments without confounding external influences, forming the basis for many biotechnological applications. With medicinal and recreational interests for Cannabis sativa L. growing, research related to the optimization of in vitro practices is needed to improve current methods while boosting our understanding of the underlying physiological processes. Unfortunately, due to the exorbitantly large array of factors influencing tissue culture, existing approaches to optimize in vitro methods are tedious and time-consuming. Therefore, there is great potential to use new computational methodologies for analyzing data to develop improved protocols more efficiently. Here, we first tested the effects of light qualities using assorted combinations of Red, Blue, Far Red, and White spanning 0-100 μmol/m2/s in combination with sucrose concentrations ranging from 1 to 6% (w/v), totaling 66 treatments, on in vitro shoot growth, root development, number of nodes, shoot emergence, and canopy surface area. Collected data were then assessed using multilayer perceptron (MLP), generalized regression neural network (GRNN), and adaptive neuro-fuzzy inference system (ANFIS) to model and predict in vitro Cannabis growth and development. Based on the results, GRNN had better performance than MLP or ANFIS and was consequently selected to link different optimization algorithms [genetic algorithm (GA), biogeography-based optimization (BBO), interior search algorithm (ISA), and symbiotic organisms search (SOS)] for prediction of optimal light levels (quality/intensity) and sucrose concentration for various applications. Predictions of in vitro conditions to refine growth responses were subsequently tested in a validation experiment and data showed no significant differences between predicted optimized values and observed data. Thus, this study demonstrates the potential of machine learning and optimization algorithms to predict the most favorable light combinations and sucrose levels to elicit specific developmental responses. Based on these, recommendations of light and carbohydrate levels to promote specific developmental outcomes for in vitro Cannabis are suggested. Ultimately, this work showcases the importance of light quality and carbohydrate supply in directing plant development as well as the power of machine learning approaches to investigate complex interactions in plant tissue culture.
Collapse
Affiliation(s)
- Marco Pepe
- Department of Plant Agriculture, Gosling Research Institute for Plant Preservation, University of Guelph, Guelph, ON, Canada
| | - Mohsen Hesami
- Department of Plant Agriculture, Gosling Research Institute for Plant Preservation, University of Guelph, Guelph, ON, Canada
| | - Finlay Small
- Department of Research and Development, Entourage Health Corp., Guelph, ON, Canada
| | - Andrew Maxwell Phineas Jones
- Department of Plant Agriculture, Gosling Research Institute for Plant Preservation, University of Guelph, Guelph, ON, Canada
| |
Collapse
|
18
|
Cannabinoid Formulations and Delivery Systems: Current and Future Options to Treat Pain. Drugs 2021; 81:1513-1557. [PMID: 34480749 PMCID: PMC8417625 DOI: 10.1007/s40265-021-01579-x] [Citation(s) in RCA: 38] [Impact Index Per Article: 12.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 07/19/2021] [Indexed: 12/24/2022]
Abstract
The field of Cannabis sativa L. research for medical purposes has been rapidly advancing in recent decades and a growing body of evidence suggests that phytocannabinoids are beneficial for a range of conditions. At the same time impressing development has been observed for formulations and delivery systems expanding the potential use of cannabinoids as an effective medical therapy. The objective of this review is to present the most recent results from pharmaceutical companies and research groups investigating methods to improve cannabinoid bioavailability and to clearly establish its therapeutic efficacy, dose ranges, safety and also improve the patient compliance. Particular focus is the application of cannabinoids in pain treatment, describing the principal cannabinoids employed, the most promising delivery systems for each administration routes and updating the clinical evaluations. To offer the reader a wider view, this review discusses the formulation starting from galenic preparation up to nanotechnology approaches, showing advantages, limits, requirements needed. Furthermore, the most recent clinical data and meta-analysis for cannabinoids used in different pain management are summarized, evaluating their real effectiveness, in order also to spare opioids and improve patients' quality of life. Promising evidence for pain treatments and for other important pathologies are also reviewed as likely future directions for cannabinoids formulations.
Collapse
|
19
|
Amendola G, Bocca B, Picardo V, Pelosi P, Battistini B, Ruggieri F, Attard Barbini D, De Vita D, Madia VN, Messore A, Di Santo R, Costi R. Toxicological aspects of cannabinoid, pesticide and metal levels detected in light Cannabis inflorescences grown in Italy. Food Chem Toxicol 2021; 156:112447. [PMID: 34343597 DOI: 10.1016/j.fct.2021.112447] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/03/2021] [Revised: 07/21/2021] [Accepted: 07/29/2021] [Indexed: 10/20/2022]
Abstract
Recently, the cultivation of light Cannabis, with a total THC content less than 0.6%, has been encouraged due to its industrial and therapeutic potential. This has increased the consumption of hemp for both smoking purposes and food preparation. Even so, Cannabis inflorescences are not subject to EU regulations and standards provided for food and tobacco products. A study was carried out on thirty-one inflorescences samples, collected in different Italian regions, in order to determine cannabinoids, pesticides and metals and to evaluate the exposure of consumers to contaminants and ensure a safe consumption. Contents of THC were always below 0.5%, while CBD ranged between 0.3 and 8.64%. The determination of 154 pesticides showed that 87% of the samples contained fungicides and insecticides in the range 0.01-185 μg/g. The most found are spinosad and cyprodinil. The concentration of metals ranged from 1 to more than 100 μg/g and As, Cd, Co, Cr, Hg, Cu, Mo, Ni and V exceeded the regulatory US limits for inhaled Cannabis products, while Pb exceeded them for both oral and inhaled products. These contaminants are intrinsically toxic and may affect public health. Actions are needed to establish regulatory measures and reduce the adverse effects caused by contaminants in Cannabis.
Collapse
Affiliation(s)
- G Amendola
- Environment and Health Department, Istituto Superiore di Sanità, Rome, Italy.
| | - B Bocca
- Environment and Health Department, Istituto Superiore di Sanità, Rome, Italy
| | - V Picardo
- Environment and Health Department, Istituto Superiore di Sanità, Rome, Italy
| | - P Pelosi
- Environment and Health Department, Istituto Superiore di Sanità, Rome, Italy
| | - B Battistini
- Environment and Health Department, Istituto Superiore di Sanità, Rome, Italy
| | - F Ruggieri
- Environment and Health Department, Istituto Superiore di Sanità, Rome, Italy
| | - D Attard Barbini
- Environment and Health Department, Istituto Superiore di Sanità, Rome, Italy
| | - D De Vita
- Dipartimento di Biologia Ambientale, "Sapienza" Università di Roma, p.le Aldo Moro 5, 00185, Rome, Italy
| | - V N Madia
- Dipartimento di Chimica e Tecnologie del Farmaco, Istituto Pasteur-Fondazione Cenci Bolognetti, "Sapienza" Università di Roma, p.le Aldo Moro 5, 00185, Rome, Italy
| | - A Messore
- Dipartimento di Chimica e Tecnologie del Farmaco, Istituto Pasteur-Fondazione Cenci Bolognetti, "Sapienza" Università di Roma, p.le Aldo Moro 5, 00185, Rome, Italy
| | - R Di Santo
- Dipartimento di Chimica e Tecnologie del Farmaco, Istituto Pasteur-Fondazione Cenci Bolognetti, "Sapienza" Università di Roma, p.le Aldo Moro 5, 00185, Rome, Italy
| | - R Costi
- Dipartimento di Chimica e Tecnologie del Farmaco, Istituto Pasteur-Fondazione Cenci Bolognetti, "Sapienza" Università di Roma, p.le Aldo Moro 5, 00185, Rome, Italy
| |
Collapse
|
20
|
Madden O, Walshe J, Kishore Patnala P, Barron J, Meaney C, Murray P. Phytocannabinoids - An Overview of the Analytical Methodologies for Detection and Quantification of Therapeutically and Recreationally Relevant Cannabis Compounds. Crit Rev Anal Chem 2021; 53:211-231. [PMID: 34328047 DOI: 10.1080/10408347.2021.1949694] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/07/2023]
Abstract
The legalization of the cultivation of low Δ9-tetrahydrocannabinol (Δ9-THC) and high cannabidiol (CBD) Cannabis Sativa plants is gaining momentum around the world due to increasing demand for CBD-containing products. In many countries where CBD oils, extracts and CBD-infused foods and beverages are being sold in health shops and supermarkets, appropriate testing of these products is a legal requirement. Normally this involves determining the total Δ9-THC and CBD and their precursor tetrahydrocannabinolic acids (THCA) and cannabidiolic acid (CBDA). As our knowledge of the other relevant cannabinoids expands, it is likely so too will the demand for them as additives in many consumer products ensuring a necessity for quantification methods and protocols for their identification. This paper discusses therapeutically relevant cannabinoids found in Cannabis plant, the applicability and efficiency of existing extraction and analytical techniques as well as the legal requirements for these analyses.
Collapse
Affiliation(s)
- Olena Madden
- Research and Technology Transfer, Shannon ABC, Limerick Institute of Technology, Limerick, Ireland
| | - Jessica Walshe
- Research and Technology Transfer, Shannon ABC, Limerick Institute of Technology, Limerick, Ireland.,Department of Applied Science, Limerick Institute of Technology, Limerick, Ireland
| | - Prem Kishore Patnala
- Research and Technology Transfer, Shannon ABC, Limerick Institute of Technology, Limerick, Ireland
| | | | - Claire Meaney
- Research and Technology Transfer, Shannon ABC, Limerick Institute of Technology, Limerick, Ireland
| | - Patrick Murray
- Research and Technology Transfer, Shannon ABC, Limerick Institute of Technology, Limerick, Ireland
| |
Collapse
|
21
|
Madia VN, De Vita D, Ialongo D, Tudino V, De Leo A, Scipione L, Di Santo R, Costi R, Messore A. Recent Advances in Recovery of Lycopene from Tomato Waste: A Potent Antioxidant with Endless Benefits. Molecules 2021; 26:molecules26154495. [PMID: 34361654 PMCID: PMC8347341 DOI: 10.3390/molecules26154495] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/24/2021] [Revised: 07/10/2021] [Accepted: 07/23/2021] [Indexed: 01/15/2023] Open
Abstract
Growing attention to environmental protection leads food industries to adopt a model of "circular economy" applying safe and sustainable technologies to recover, recycle and valorize by-products. Therefore, by-products become raw material for other industries. Tomato processing industry produces significant amounts of by-products, consisting of skins and seeds. Tomato skin is very rich in lycopene, and from its seeds, high nutritional oil can be extracted. Alternative use of the two fractions not only could cut disposal costs but also allow one to extract bioactive compounds and an oil with a high nutritional value. This review focused on the recent advance in extraction of lycopene, whose beneficial effects on health are widely recognized.
Collapse
Affiliation(s)
- Valentina Noemi Madia
- Istituto Pasteur-Fondazione Cenci Bolognetti, Dipartimento di Chimica e Tecnologie del Farmaco, “Sapienza” Università di Roma, p.le Aldo Moro 5, I-00185 Rome, Italy; (V.N.M.); (D.I.); (V.T.); (A.D.L.); (L.S.); (R.D.S.); (A.M.)
| | - Daniela De Vita
- Department of Environmental Biology, “Sapienza” University of Rome, p.le Aldo Moro 5, I-00185 Rome, Italy;
| | - Davide Ialongo
- Istituto Pasteur-Fondazione Cenci Bolognetti, Dipartimento di Chimica e Tecnologie del Farmaco, “Sapienza” Università di Roma, p.le Aldo Moro 5, I-00185 Rome, Italy; (V.N.M.); (D.I.); (V.T.); (A.D.L.); (L.S.); (R.D.S.); (A.M.)
| | - Valeria Tudino
- Istituto Pasteur-Fondazione Cenci Bolognetti, Dipartimento di Chimica e Tecnologie del Farmaco, “Sapienza” Università di Roma, p.le Aldo Moro 5, I-00185 Rome, Italy; (V.N.M.); (D.I.); (V.T.); (A.D.L.); (L.S.); (R.D.S.); (A.M.)
| | - Alessandro De Leo
- Istituto Pasteur-Fondazione Cenci Bolognetti, Dipartimento di Chimica e Tecnologie del Farmaco, “Sapienza” Università di Roma, p.le Aldo Moro 5, I-00185 Rome, Italy; (V.N.M.); (D.I.); (V.T.); (A.D.L.); (L.S.); (R.D.S.); (A.M.)
| | - Luigi Scipione
- Istituto Pasteur-Fondazione Cenci Bolognetti, Dipartimento di Chimica e Tecnologie del Farmaco, “Sapienza” Università di Roma, p.le Aldo Moro 5, I-00185 Rome, Italy; (V.N.M.); (D.I.); (V.T.); (A.D.L.); (L.S.); (R.D.S.); (A.M.)
| | - Roberto Di Santo
- Istituto Pasteur-Fondazione Cenci Bolognetti, Dipartimento di Chimica e Tecnologie del Farmaco, “Sapienza” Università di Roma, p.le Aldo Moro 5, I-00185 Rome, Italy; (V.N.M.); (D.I.); (V.T.); (A.D.L.); (L.S.); (R.D.S.); (A.M.)
| | - Roberta Costi
- Istituto Pasteur-Fondazione Cenci Bolognetti, Dipartimento di Chimica e Tecnologie del Farmaco, “Sapienza” Università di Roma, p.le Aldo Moro 5, I-00185 Rome, Italy; (V.N.M.); (D.I.); (V.T.); (A.D.L.); (L.S.); (R.D.S.); (A.M.)
- Correspondence: ; Tel.: +39-064969-3247
| | - Antonella Messore
- Istituto Pasteur-Fondazione Cenci Bolognetti, Dipartimento di Chimica e Tecnologie del Farmaco, “Sapienza” Università di Roma, p.le Aldo Moro 5, I-00185 Rome, Italy; (V.N.M.); (D.I.); (V.T.); (A.D.L.); (L.S.); (R.D.S.); (A.M.)
| |
Collapse
|
22
|
Lazarjani MP, Young O, Kebede L, Seyfoddin A. Processing and extraction methods of medicinal cannabis: a narrative review. J Cannabis Res 2021; 3:32. [PMID: 34281626 PMCID: PMC8290527 DOI: 10.1186/s42238-021-00087-9] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/17/2020] [Accepted: 06/29/2021] [Indexed: 11/10/2022] Open
Abstract
INTRODUCTION As the cannabis industry transitions from a black market to a legal market, product development, and methods of extraction have become a focal point. To date, more than thousands of chemical constituents have been identified from the cannabis plant, all of which possess different chemical properties that require different conditions for preservation during drying and extraction. However, scientific publications that explore these areas for the cannabis plant are currently lacking. METHOD This is a narrative review paper which focuses on critiquing drying and extraction methods of Cannabis sativa L. plant. Relevant keywords such as medicinal cannabis, extraction, solvent, cannabinoids, and terpenes have been searched in PubMed, EMBASE, MEDLINE, Google Scholar, and Cochrane Library (Wiley) databases. RESULT To find relevant papers for this narrative review, 93 papers have been reviewed. Among them, 12 irrelevant papers were discarded. The excluded papers were either about hemp seed oil or hemp fiber and protein. Based on this review, solvent extraction is the most common method for cannabis plants. Although solventless and hydrodynamic extraction are known for their high yield and feasibility, more investigation is needed in these areas. Regarding the drying process, hang-drying is the most convenient method; however, it may be substituted by freeze-drying in the near future. DISCUSSION This review analyses various drying and extraction processes to guide the selection of suitable methods for various types of cannabis products and applications. This is done by outlining traditional and modern methods of drying techniques, exploring the importance of solvents for extraction, visiting solventless extraction procedures, and finally comparing conventional and alternative methods of extraction. CONCLUSION In conclusion, based on the current knowledge, using organic solvents is the most convenient method for medicinal cannabis extraction. However, more research is needed for some of the drying and extraction methods. Also, developing a green and sustainable cannabis extraction method should be considered for future studies.
Collapse
Affiliation(s)
- Masoumeh Pourseyed Lazarjani
- Drug Delivery Research Group, School of Science, Faculty of Health and Environmental Sciences, Auckland University of Technology, Auckland, New Zealand
| | - Owen Young
- School of Science, Faculty of Health and Environmental Sciences, Auckland University of Technology, Auckland, New Zealand
| | - Lidya Kebede
- Drug Delivery Research Group, School of Science, Faculty of Health and Environmental Sciences, Auckland University of Technology, Auckland, New Zealand
| | - Ali Seyfoddin
- Drug Delivery Research Group, School of Science, Faculty of Health and Environmental Sciences, Auckland University of Technology, Auckland, New Zealand.
| |
Collapse
|
23
|
Different Cannabis sativa Extraction Methods Result in Different Biological Activities against a Colon Cancer Cell Line and Healthy Colon Cells. PLANTS 2021; 10:plants10030566. [PMID: 33802757 PMCID: PMC8002592 DOI: 10.3390/plants10030566] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/01/2021] [Revised: 03/10/2021] [Accepted: 03/12/2021] [Indexed: 01/14/2023]
Abstract
Cannabis sativa is one of the oldest medicinal plants used by humans, containing hundreds of bioactive compounds. The biological effects and interplay of these compounds are far from fully understood, although the plant’s therapeutic effects are beyond doubt. Extraction methods for these compounds are becoming an integral part of modern Cannabis-based medicine. Still, little is known about how different methods affect the final composition of Cannabis extracts and thus, their therapeutic effects. In this study, different extraction methods were tested, namely maceration, Soxhlet, ultrasound-assisted extraction (UAE), and supercritical CO2 extraction methods. The obtained extracts were evaluated for their cannabinoid content, antioxidant properties, and in vitro bioactivity on human colon cancer and healthy colon cells. Our data suggest that Cannabis extracts, when properly prepared, can significantly decrease cancer cell viability while protecting healthy cells from cytotoxic effects. However, post-processing of extracts poses a significant limitation in predicting therapeutic response based on the composition of the crude extract, as it affects not only the actual amounts of the respective cannabinoids but also their relative ratio to the primary extracts. These effects must be carefully considered in the future preparations of new therapeutic extracts.
Collapse
|
24
|
Supercritical fluid technologies applied to the extraction of compounds of industrial interest from Cannabis sativa L. and to their pharmaceutical formulations: A review. J Supercrit Fluids 2020. [DOI: 10.1016/j.supflu.2020.104960] [Citation(s) in RCA: 52] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
|
25
|
Pegoraro CN, Nutter D, Thevenon M, Ramirez CL. Chemical profiles of cannabis sativa medicinal oil using different extraction and concentration methods. Nat Prod Res 2019; 35:2249-2252. [PMID: 31512513 DOI: 10.1080/14786419.2019.1663515] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/26/2022]
Abstract
The present study shows the variability in chemical profiles of three different varieties of Cannabis sativa extracts used in medicinal cannabis oil when using two different extraction and evaporation methods. Procedures were compared by analyzing rate of total terpenoids to the principal cannabinoids, tetrahydrocannabinol (THC) and cannabidiol (CBD), using gas chromatography coupled to mass spectrometry (GC-MS). The extraction of inflorescences using soxhlet method showed the highest mass of final extract. Also, the use of heating and the presence of oxygen when evaporating the solvents, greatly modified the final profiles due to evaporation or chemical reactions. These variations in chemical profiles must be carefully taken into account and standardized in the elaboration of medicinal oils.
Collapse
Affiliation(s)
- Cesar N Pegoraro
- Departamento de Química, Facultad de Ciencias Exactas y Naturales, Universidad Nacional de Mar del Plata, Conicet, Argentina
| | - Diego Nutter
- CAMEDA (Cannabis Medicinal Argentina), Olazabal, Argentina
| | - Mario Thevenon
- Laboratorio de Botánica, Departamento de Biología, Facultad de Ciencias Exactas y Naturales, Universidad Nacional de Mar del Plata, Mar del Plata, Argentina
| | - Cristina L Ramirez
- Departamento de Química, Facultad de Ciencias Exactas y Naturales, Universidad Nacional de Mar del Plata, Conicet, Argentina
| |
Collapse
|