Aponeurosis behaviour during muscular contraction: A narrative review

A clinical study on the incidence of internal derangement of the temporomandibular joint following harvesting of temporalis fascia

OBJECTIVE

The aim of the current clinical study was to reveal whether harvesting of a temporalis fascia graft would be associated with a higher incidence of temporomandibular joint (TMJ) internal derangement.

METHODS

The study group involved 104 patients who had middle-ear operations, 67 of which involved harvesting of temporalis fascia and 37 that did not. The TMJs were clinically examined in each group.

RESULTS

The total incidence of internal derangement of the TMJ was significantly higher in the group that had temporalis fascia harvesting (79.1%), compared to the group that did not have temporalis fascia harvesting (29.7%), (p= 0.001).

CONCLUSION

Harvesting of temporalis fascia probably alters mandibular kinematics and predisposes to internal derangement of the TMJs.

The Structure, Function, and Adaptation of Lower-Limb Aponeuroses: Implications for Myo-Aponeurotic Injury

The aponeurosis is a large fibrous connective tissue structure within and surrounding skeletal muscle and is a critical component of the muscle-tendon unit (MTU). Due to the lack of consensus on terminology and the heterogeneous nature of the aponeurosis between MTUs, there are several questions that remain unanswered. For example, the aponeurosis is often conflated with the free tendon rather than being considered an independent structure. This has subsequent implications when interpreting data regarding the structure, function, and adaptation of the aponeuroses from these studies. In recent years, a body of work has emerged to suggest that acute injury to the myo-aponeurotic complex may have an impact on return-to-sport timeframes and reinjury rates. Therefore, the purpose of this review is to provide a more detailed understanding of the morphology and mechanical behaviour common to all aponeuroses, as well as the unique characteristics of specific lower-limb aponeuroses that are commonly injured. This review provides the practitioner with a current understanding of the mechanical, material, and adaptive properties of lower limb aponeuroses and suggests directions for future research related to the myo-aponeurotic complex.

Impact of contraction intensity and ankle joint angle on calf muscle fascicle length and pennation angle during isometric and dynamic contractions

During muscle contraction, not only are the fascicles shortening but also the pennation angle changes, which leads to a faster contraction of the muscle than of its fascicles. This phenomenon is called muscle gearing, and it has a direct influence on the force output of the muscle. There are few studies showing pennation angle changes during isometric and concentric contractions for different contraction intensities and muscle lengths. Therefore, the aim was to determine these influences over a wide range of contraction intensities and ankle joint angles for human triceps surae. Additionally, the influence of contraction intensity and ankle joint angle on muscle gearing was evaluated. Ten sport students performed concentric and isometric contractions with intensities between 0 and 90% of the maximum voluntary contraction and ankle joint angles from 50° to 120°. During these contractions, the m. gastrocnemius medialis and lateralis and the m. soleus were recorded via ultrasound imaging. A nonlinear relationship between fascicle length and pennation angle was discovered, which can be described with a quadratic fit for each of the muscles during isometric contraction. A nearly identical relationship was detected during dynamic contraction. The muscle gearing increased almost linearly with contraction intensity and ankle joint angle.

Aponeurotic Expansion as a Cause for Rotator Cuff Tears but Full Joint Movements in Patients: Magnetic Resonance Arthrography Images of Aponeurotic Expansion and the Clinical Situation

This case report presents the detailed clinical and radiological findings of a 63-year-old male patient who presented with right shoulder pain. Magnetic resonance imaging (MRI) and magnetic resonance arthrography (MRA) revealed significant tears in most of the rotator cuff muscles. Despite these findings, the patient was able to perform full shoulder movements, suggesting that aponeurotic expansion may play a crucial role in this scenario. This case highlights important clinical findings that could lead to potential changes in shoulder surgery and rehabilitation approaches.

Influence of muscle length on the three-dimensional architecture and aponeurosis dimensions of rabbit calf muscles

The function of a muscle is highly dependent on its architecture, which is characterized by the length, pennation, and curvature of the fascicles, and the geometry of the aponeuroses. During in vivo function, muscles regularly undergo changes in length, thereby altering their architecture. During passive muscle lengthening, fascicle length (FL) generally increases and the angle of fascicle pennation (FP) and the fascicle curvature (FC) decrease, while the aponeuroses increase in length but decrease in width. Muscles are differently structured, making their change during muscle lengthening complex and multifaceted. To obtain comprehensive data on architectural changes in muscles during passive length, the present study determined the three-dimensional fascicle geometry of rabbit M. gastrocnemius medialis (GM), M. gastrocnemius lateralis (GL), and M. plantaris (PLA). For this purpose, the left and right legs of three rabbits were histologically fixed at targeted ankle joint angles of 95° (short muscle length [SML]) and 60° (long muscle length [LML]), respectively, and the fascicles were tracked by manual three-dimensional digitization. In a second set of experiments, the GM aponeurosis dimensions of ten legs from five rabbits were determined at varying muscle lengths via optical marker tracking. The GM consisted of a uni-pennated compartment, whereas the GL and PLA contained multiple compartments of differently pennated fascicles. In the LML compared to the SML, the GM, GL, and PLA had on average a 41%, 29%, and 41% increased fascicle length, and a 30%, 25%, and 33% decrease in fascicle pennation and a 32%, 11%, and 35% decrease in fascicle curvature, respectively. Architectural properties were also differentiated among the different compartments of the PLA and GL, allowing for a more detailed description of their fascicle structure and changes. It was shown that the compartments change differently with muscle length. It was also shown that for each degree of ankle joint angle reduction, the proximal GM aponeurosis length increased by 0.11%, the aponeurosis width decreased by 0.22%, and the area was decreased by 0.20%. The data provided improve our understanding of muscles and can be used to develop and validate muscle models.

Muscle wobbling mass dynamics: eigenfrequency dependencies on activity, impact strength, and ground material

In legged locomotion, muscles undergo damped oscillations in response to the leg contacting the ground (an impact). How muscle oscillates varies depending on the impact situation. We used a custom-made frame in which we clamped an isolated rat muscle (M. gastrocnemius medialis and lateralis: GAS) and dropped it from three different heights and onto two different ground materials. In fully activated GAS, the dominant eigenfrequencies were 163 Hz, 265 Hz, and 399 Hz, which were signficantly higher (p < 0.05) compared to the dominant eigenfrequencies in passive GAS: 139 Hz, 215 Hz, and 286 Hz. In general, neither changing the falling height nor ground material led to any significant eigenfrequency changes in active nor passive GAS, respectively. To trace the eigenfrequency values back to GAS stiffness values, we developed a 3DoF model. The model-predicted GAS muscle eigenfrequencies matched well with the experimental values and deviated by - 3.8%, 9.0%, and 4.3% from the passive GAS eigenfrequencies and by - 1.8%, 13.3%, and - 1.5% from the active GAS eigenfrequencies. Differences between the frequencies found for active and passive muscle impact situations are dominantly due to the attachment of myosin heads to actin.

Aponeurosis structure-function properties: Evidence of heterogeneity and implications for muscle function

Aponeurosis is a sheath-like connective tissue that aids in force transmission from muscle to tendon and can be found throughout the musculoskeletal system. The key role of aponeurosis in muscle-tendon unit mechanics is clouded by a lack of understanding of aponeurosis structure-function properties. This work aimed to determine the heterogeneous material properties of porcine triceps brachii aponeurosis tissue with materials testing and evaluate heterogeneous aponeurosis microstructure with scanning electron microscopy. We found that aponeurosis may exhibit more microstructural collagen waviness in the insertion region (near the tendon) compared to the transition region (near the muscle midbelly) (1.20 versus 1.12, p = 0.055), which and a less stiff stress-strain response in the insertion versus transition regions (p < 0.05). We also showed that different assumptions of aponeurosis heterogeneity, specifically variations in elastic modulus with location can alter the stiffness (by more than 10x) and strain (by approximately 10% muscle fiber strain) of a finite element model of muscle and aponeurosis. Collectively, these results suggest that aponeurosis heterogeneity could be due to variations in tissue microstructure and that different approaches to modeling tissue heterogeneity alters the behavior of computational models of muscle-tendon units. STATEMENT OF SIGNIFICANCE: Aponeurosis is a connective tissue found in many muscle tendon units that aids in force transmission, yet little is known about the specific material properties of aponeurosis. This work aimed to determine how the properties of aponeurosis tissue varied with location. We found that aponeurosis exhibits more microstructural waviness near the tendon compared to near the muscle midbelly, which was associated with differences in tissue stiffness. We also showed that different variations in aponeurosis modulus (stiffness) can alter the stiffness and stretch of a computer model of muscle tissue. These results show that assuming uniform aponeurosis structure and modulus, which is common, may lead to inaccurate models of the musculoskeletal system.

The Influence of Hip and Knee Joint Angles on Quadriceps Muscle-Tendon Unit Properties during Maximal Voluntary Isometric Contraction

Determining how the quadriceps femoris musculotendinous unit functions, according to hip and knee joint angles, may help with clinical decisions when prescribing knee extension exercises. We aimed to determine the effect of hip and knee joint angles on structure and neuromuscular functioning of all constituents of the quadriceps femoris and patellar tendon properties. Twenty young males were evaluated in four positions: seated and supine in both 20° and 60° of knee flexion (SIT20, SIT60, SUP20, and SUP60). Peak knee extension torque was determined during maximal voluntary isometric contraction (MVIC). Ultrasound imaging was used at rest and during MVIC to characterize quadriceps femoris muscle and tendon aponeurosis complex stiffness. We found that peak torque and neuromuscular efficiency were higher for SUP60 and SIT60 compared to SUP20 and SIT20 position. We found higher fascicle length and lower pennation angle in positions with the knee flexed at 60°. The tendon aponeurosis complex stiffness, tendon force, stiffness, stress, and Young's modulus seemed greater in more elongated positions (60°) than in shortened positions (20°). In conclusion, clinicians should consider positioning at 60° of knee flexion rather than 20°, regardless if seated or supine, during rehabilitation to load the musculotendinous unit enough to stimulate a cellular response.

The non-intuitive, in-vivo behavior of aponeuroses in a unipennate muscle

Experimental observations and theoretical models suggest that the loading of muscular aponeuroses is complex, causing strain patterns that are not reconcilable with the frequently assumed mechanical "in series" arrangement of aponeuroses with muscles and tendons. The purpose of this work was to measure the in-vivo longitudinal strains of the distal and proximal aponeuroses and force of the unipennate Medial Gastrocnemius (MG) muscle during locomotor activities. Sonomicrometry crystals and a force buckle transducer were implanted to measure aponeurosis strains and MG forces in the left hindlimb of four healthy female sheep while walking at different speeds and inclination angles on a motorized treadmill. The resulting aponeurosis strains versus the corresponding muscle forces resulted in a complex interaction that is not reconcilable with a mechanical "in series" arrangement of aponeuroses with either the free tendon or muscle, as has frequently been assumed when trying to determine the storage and release of mechanical energy in muscles or the stiffness and elastic modulus of in-vivo aponeurosis tissues. We conclude that the interaction of muscle tissue with aponeuroses in the sheep MG allows for elongation of the aponeuroses at low forces in the passive muscle, while elongation in the active muscle is greatly reduced possibly due to the complex shear forces and pressures produced when the muscle is activated. It is likely that the observed aponeurosis mechanics are similar in other unipennate skeletal muscles, but the current study was limited to a single muscle and therefore does not allow for such extrapolation at this time.

Common synaptic input between motor units from the lateral and medial posterior soleus compartments does not differ from that within each compartment

The human soleus muscle is anatomically divided into four separate anatomical compartments. The functional role of this compartmentalization remains unclear. Here, we tested the hypothesis that the common synaptic input to motor units between the medial and lateral posterior compartments is less than within each compartment. Fourteen male participants performed three different heel-raise tasks that were considered to place a different mechanical demand on the medial and lateral soleus compartments. High-density electromyography (EMG) signals from the medial and lateral soleus compartments and the medial gastrocnemius of the right leg were decomposed into individual motor unit spike trains. The coherence between cumulative spike trains of the motor units was estimated. The coherence analysis was also repeated for motor units that were matched across all three tasks. Furthermore, we calculated the ratio of significant correlations between the spike trains of pairs of motor units. We observed that the coherence between motor units of the two soleus compartments was similar as the coherence between motor units within each compartment, regardless of the task. The correlation analysis performed on pairs of motor units confirmed these results. We conclude that the level of common synaptic input between the motor units innervating the medial and lateral posterior soleus compartment is not different than the common synaptic input between motor units innervating each of these compartments, which contrasts with findings from previous studies on finger muscles. This suggests that there is no independent neural control for the individual posterior soleus compartments.NEW & NOTEWORTHY The human soleus muscle is anatomically subdivided into four compartments. The functional role for this compartmentalization remains unknown. Here, we showed that, contrary to previous findings in finger muscles, the common synaptic input between motor units innervating the medial and lateral posterior soleus compartment was similar as that between motor units within the individual compartments. We suggest that the contradictory findings with other compartmentalized muscles may be explained by differences in muscle-tendon anatomy and function.

Hip and Knee Joint Angles Determine Fatigue Onset during Quadriceps Neuromuscular Electrical Stimulation

Neuromuscular electrical stimulation (NMES) has been used to increase muscle strength and physical function. However, NMES induces rapid fatigue, limiting its application. To date, the effect of quadriceps femoris (QF) muscle length by knee and hip joint manipulation on NMES-induced contraction fatigability is not clear. We aimed to quantify the effects of different muscle lengths on NMES-induced contraction fatigability, fatigue index, and electromyographic (EMG) activity for QF muscle. QF maximum evoked contraction (QMEC) was applied in a 26 min protocol (10 s on; 120 s off; 12 contractions) in 20 healthy participants (24.0 ± 4.6 years old), over 4 sessions on different days to test different conditions. The tested conditions were as follows: supine with knee flexion of 60° (SUP60), seated with knee flexion of 60° (SIT60), supine with knee flexion of 20° (SUP20), and seated with knee flexion of 20° (SIT20). Contraction fatigability (torque decline assessed by maximal voluntary contraction [MVC] and during NMES), fatigue index (percentage reduction in MVC), and EMG activity (root mean square [RMS] and median frequency) of the superficial QF' constituents were assessed. After NMES, all positions except SUP20 had an absolute reduction in MVC (p < .001). Fatigue index was greater in SIT20 than in SIT60 (p < .001) and SUP20 (p = .01). There was significant torque reduction across the 12 QMEC in SUP60 and SIT60, up to 10.5% (p < .001–.005) and 9.49% (p < .001–.033), respectively. There was no torque reduction during NMES in SUP20 and SIT20. Fatigue was accompanied by an increase in RMS (p = .032) and a decrease in median frequency for SUP60 (p < .001). Median frequency increased only in the SUP20 condition (p = .021). We concluded that QF NMES-induced contraction fatigability is greater when the knee is flexed at 60° compared to 20°. In addition, a supine position promotes earlier fatigue for a 60° knee flexion, but it delays fatigue onset for a 20° knee flexion compared to the seated position. These results provide a rationale for lower limb positioning during NMES, which depends on training objectives, e.g., strengthening or task-specific functionality training.

Stimuli for Adaptations in Muscle Length and the Length Range of Active Force Exertion-A Narrative Review

Treatment strategies and training regimens, which induce longitudinal muscle growth and increase the muscles’ length range of active force exertion, are important to improve muscle function and to reduce muscle strain injuries in clinical populations and in athletes with limited muscle extensibility. Animal studies have shown several specific loading strategies resulting in longitudinal muscle fiber growth by addition of sarcomeres in series. Currently, such strategies are also applied to humans in order to induce similar adaptations. However, there is no clear scientific evidence that specific strategies result in longitudinal growth of human muscles. Therefore, the question remains what triggers longitudinal muscle growth in humans. The aim of this review was to identify strategies that induce longitudinal human muscle growth. For this purpose, literature was reviewed and summarized with regard to the following topics: (1) Key determinants of typical muscle length and the length range of active force exertion; (2) Information on typical muscle growth and the effects of mechanical loading on growth and adaptation of muscle and tendinous tissues in healthy animals and humans; (3) The current knowledge and research gaps on the regulation of longitudinal muscle growth; and (4) Potential strategies to induce longitudinal muscle growth. The following potential strategies and important aspects that may positively affect longitudinal muscle growth were deduced: (1) Muscle length at which the loading is performed seems to be decisive, i.e., greater elongations after active or passive mechanical loading at long muscle length are expected; (2) Concentric, isometric and eccentric exercises may induce longitudinal muscle growth by stimulating different muscular adaptations (i.e., increases in fiber cross-sectional area and/or fiber length). Mechanical loading intensity also plays an important role. All three training strategies may increase tendon stiffness, but whether and how these changes may influence muscle growth remains to be elucidated. (3) The approach to combine stretching with activation seems promising (e.g., static stretching and electrical stimulation, loaded inter-set stretching) and warrants further research. Finally, our work shows the need for detailed investigation of the mechanisms of growth of pennate muscles, as those may longitudinally grow by both trophy and addition of sarcomeres in series.

Architectural model for muscle growth during maturation

Muscle architecture, which includes parameters like fascicle length, pennation angle, and physiological cross-sectional area, strongly influences skeletal muscles' mechanical properties. During maturation, the muscle architecture has to adapt to a growing organism. This study aimed to develop an architectural model capable of predicting the complete 3D fascicle architecture for primarily unipennate muscles of an arbitrary age, based on fascicle data for an initial age. For model development, we collected novel data on 3D muscle architecture of the rabbit (Oryctolagus cuniculus) M. plantaris of eight animals ranging in age from 29 to 106 days. Experimental results show that plantaris muscle belly length increases by 73%, whereas mean fascicle length and mean pennation angle increases by 39 and 14%, respectively. Those changes were incorporated into the model. In addition to the data collected for M. plantaris the predictions of the model were compared to existing literature data of rabbit M. soleus and M. gastrocnemius medialis. With an error of −1.0 ± 8.6% for relative differences in aponeurosis length, aponeurosis width, muscle height, and muscle mass, the model delivered good results matching interindividual differences. For future studies, the model could be utilized to generate realistic architectural data sets for simulation studies.

The Effect of Quadriceps Muscle Length on Maximum Neuromuscular Electrical Stimulation Evoked Contraction, Muscle Architecture, and Tendon-Aponeurosis Stiffness

Muscle-tendon unit length plays a crucial role in quadriceps femoris muscle (QF) physiological adaptation, but the influence of hip and knee angles during QF neuromuscular electrical stimulation (NMES) is poorly investigated. We investigated the effect of muscle length on maximum electrically induced contraction (MEIC) and current efficiency. We secondarily assessed the architecture of all QF constituents and their tendon-aponeurosis complex (TAC) displacement to calculate a stiffness index. This study was a randomized, repeated measure, blinded design with a sample of twenty healthy men aged 24.0 ± 4.6. The MEIC was assessed in four different positions: supine with knee flexion of 60° (SUP60); seated with knee flexion of 60° (SIT60); supine with knee flexion of 20° (SUP20), and seated with knee flexion of 20° (SIT20). The current efficiency (MEIC/maximum tolerated current amplitude) was calculated. Ultrasonography of the QF was performed at rest and during NMES to measure pennation angle (θ p ) and fascicle length (L f ), and the TAC stiffness index. MEIC and current efficiency were greater for SUP60 and SIT60 compared to SUP20 and SIT20. The vastus lateralis and medialis showed lower θ p and higher L f at SUP60 and SIT60, while for the rectus femoris, in SUP60 there were lower θ p and higher L f than in all positions. The vastus intermedius had a similar pattern to the other vastii, except for lack of difference in θ p between SIT60 compared to SUP20 and SIT20. The TAC stiffness index was greater for SUP60. We concluded that NMES generate greater torque and current efficiency at 60° of knee flexion, compared to 20°. For these knee angles, lengthening the QF at the hip did not promote significant change. Each QF constituent demonstrated muscle physiology patterns according to hip and/or knee angles, even though a greater L f and lower θ p were predominant in SUP60 and SIT60. QF TAC index stiffened in more elongated positions, which probably contributed to enhanced force transmission and slightly higher torque in SUP60. Our findings may help exercise physiologist better understand the impact of hip and knee angles on designing more rational NMES stimulation strategies.

CLINICAL TRIAL REGISTRATION

www.ClinicalTrials.gov, identifier NCT03822221.

Inhomogeneous and Anisotropic Mechanical Properties of the Triceps Surae Aponeuroses in Older Adults: Relationships With Muscle Strength and Walking Performance

This study investigated (a) site- and direction-dependent variations of passive triceps surae aponeurosis stiffness and (b) the relationships between aponeurosis stiffness and muscle strength and walking performance in older individuals. Seventy-nine healthy older adults participated in this study. Shear wave velocities of the triceps surae aponeuroses at different sites and in two orthogonal directions were obtained in a prone position at rest using supersonic shear imaging. The maximal voluntary isometric contraction torque of the plantar flexors and normal (preferred) and fast (fastest possible) walking speeds (5-m distance) were also measured. The shear wave velocities of the adjoining aponeuroses were weakly associated with plantar flexion torque (r = .23-.34), normal (r = .26), and fast walking speed (r = .25). The results show clear spatial variations and anisotropy of the triceps surae aponeuroses stiffness in vivo, and the aponeurosis stiffness was associated with physical ability in older adults.

The effects of an activation-dependent increase in titin stiffness on whole muscle properties using finite element modeling

Active state titin's effects have been studied predominantly in sarcomere or muscle fiber segment level and an understanding of its functional effects in the context of a whole muscle, and the mechanism of those is lacking. By representing experimentally observed calcium induced stiffening and actin-titin interaction induced reduced free spring length effects of active state titin in our linked fiber-matrix mesh finite element model, our aim was to study the mechanism of effects and particularly to determine the functionally more effective active state titin model. Isolated EDL muscle of the rat was modeled and three cases were studied: passive state titin (no change in titin constitutive equation in the active state), active state titin-I (constitutive equation involves a higher stiffness in the active state) and active state titin-II (constitutive equation also involves a strain shift coefficient accounting for titin's reduced free spring length). Isometric muscle lengthening was imposed (initial to long length, l_m = 28.7 mm to 32.7 mm). Compared to passive state titin, (i) active state titin-I and II elevates muscle total (l_m = 32.7 mm: 14% and 29%, respectively) and active (l_m = 32.7 mm: 37.5% and 77.4%, respectively) forces, (ii) active state titin-II also shifts muscle's optimum length to a longer length (l_m = 29.6 mm), (iii) active state titin-I and II limits sarcomere shortening (l_m = 32.7 mm: up to 10% and 20%, respectively). Such shorter sarcomere effect characterizes active state titin's mechanism of effects. These effects become more pronounced and functionally more effective if not only calcium induced stiffening but also a reduced free spring length of titin is accounted for.

Muscle-tendon morphology and function following long-term exposure to repeated and strenuous mechanical loading

We mapped structural and functional characteristics of muscle-tendon units in a population exposed to very long-term routine overloading. Twenty-eight military academy cadets (age = 21.00 ± 1.1 years; height = 176.1 ± 4.8 cm; mass = 73.8 ± 7.0 kg) exposed for over 24 months to repetitive overloading were profiled via ultrasonography with a senior subgroup of them (n = 11; age = 21.4 ± 1.0 years; height = 176.5 ± 4.8 cm; mass = 71.4 ± 6.6 kg) also tested while walking and marching on a treadmill. A group of eleven ethnicity- and age-matched civilians (age = 21.6 ± 0.7 years; height = 176.8 ± 4.3 cm; mass = 74.6 ± 5.6 kg) was also profiled and tested. Cadets and civilians exhibited similar morphology (muscle and tendon thickness and cross-sectional area, pennation angle, fascicle length) in 26 out of 29 sites including the Achilles tendon. However, patellar tendon thickness along the entire tendon was greater (P < .05) by a mean of 16% for the senior cadets compared with civilians. Dynamically, cadets showed significantly smaller ranges of fascicle length change and lower shortening velocity in medial gastrocnemius during walking (44.0% and 47.6%, P < .05-.01) and marching (27.5% and 34.3%, P < .05-.01) than civilians. Furthermore, cadets showed lower normalized soleus electrical activity during walking (22.7%, P < .05) and marching (27.0%, P < .05). Therefore, 24-36 months of continuous overloading, primarily occurring under aerobic conditions, leads to more efficient neural and mechanical behavior in the triceps surae complex, without any major macroscopic alterations in key anatomical structures.

Bouncing Back! Counteracting Muscle Aging With Plyometric Muscle Loading

The preservation of muscle power is crucial in aging for maintaining mobility and performing daily tasks. Resistance training involving high movement velocities represents a valid strategy to slow down the rate of sarcopenia, counteracting the loss of muscle mass and muscle power. Plyometric exercise may represent an effective training modality for increasing muscle power; however, its application in older populations has been sparingly investigated, as the high impact actions involved may reduce its feasibility for older individuals. By adopting a safer modality of plyometric training, we investigated if a 6-week plyometric training intervention could increase knee extensor muscle size, architecture, force and power in 14 young (YM, age = 25.4 ± 3.5 y; means ± SD) and nine older males (OM, age = 69.7 ± 3.4 y). Volunteers trained 3 times/week using a device similar to a leg press machine where the user was required to bounce against his body mass on a trampoline. Pre-to-post training changes in isometric maximum voluntary torque (MVT), leg extension power and vastus lateralis (VL) architecture were assessed. Muscle power increased in both groups (+27% OM -P < 0.001, 20% YM -P < 0.001), although the total external work performed during the training period was significantly lower for OM (i.e., ~-47%). Both groups showed significant increases in muscle thickness (MT) (+5.8 OM -P < 0.01 vs. +3.8% YM -P < 0.01), fascicle length (Lf) (+8% OM -P < 0.001 vs. +6% YM -P < 0.001), and pennation angle (PA) (+7.5% OM -P < 0.001 vs. +4.1% YM -P < 0.001). The current study shows that trampoline-based plyometric training is an effective intervention producing a rapid increase in muscle mass and power in both young and older individuals. The training modality used in this study seems to particularly benefit the older population, targeting the morphological and functional effects of sarcopenia in human muscle.

Validity and reliability of measurements of aponeurosis dimensions from magnetic resonance images

Muscle performance is closely related to the structure and function of tendons and aponeuroses, the sheet-like, intramuscular parts of tendons. The architecture of aponeuroses has been difficult to study with magnetic resonance imaging (MRI) because these thin, collagen-rich connective tissues have very short transverse relaxation (T2) times and therefore provide a weak signal with conventional MRI sequences. Here, we validated measurements of aponeurosis dimensions from two MRI sequences commonly used in muscle-tendon research (mDixon and T1-weighted images), and an ultrashort echo time (UTE) sequence designed for imaging tissues with short T2 times. MRI-based measurements of aponeurosis width, length, and area of 20 sheep leg muscles were compared to direct measurements made with three-dimensional (3D) quantitative microdissection. The errors in measurement of aponeurosis width relative to the mean width were 1.8% for UTE, 3.7% for T1, and 18.8% for mDixon. For aponeurosis length, the errors were 7.6% for UTE, 1.9% for T1, and 21.0% for mDixon. Measurements from T1 and UTE scans were unbiased, but mDixon scans systematically underestimated widths, lengths, and areas of the aponeuroses. Using the same methods, we then found high inter-rater reliability (intraclass correlation coefficients >0.92 for all measures) of measurements of the dimensions of the central aponeurosis of the human tibialis anterior muscle from T1-weighted scans. We conclude that valid and reliable measurements of aponeurosis dimensions can be obtained from UTE and from T1-weighted scans. When the goal is to study the macroscopic architecture of aponeuroses, UTE does not hold an advantage over T1-weighted imaging.

Morphological and mechanical properties of the human triceps surae aponeuroses taken from elderly cadavers: Implications for muscle-tendon interactions

The human triceps surae (two gastrocnemii and soleus) has aponeuroses in the proximal and distal aspects, the latter of which insert into the calcaneus by sharing the common Achilles tendon. These tendinous tissues are known to have elasticity and upon muscle contraction the aponeurosis is stretched both longitudinally (along the muscle’s line of action) and transversely. Higher aponeurosis transverse deformability has been documented, but there is a paucity of information on the morphology and mechanical properties of human aponeurosis. This study aimed to identify morphological and mechanical characteristics of the human triceps surae aponeuroses. Twenty-five triceps surae muscle-tendon units were procured from 13 human donors (formalin fixed, 6 males, 7 females) aged 67–91 years. Specimens of aponeuroses were excised from the eight regions (posterior and anterior regions of the gastrocnemius medialis and lateralis, medial and lateral parts of soleus; proximal, middle, and distal sites each, 2–4 cm × 2–4 cm). Aponeurosis thickness was measured using a digital caliper. Uniaxial tensile tests were implemented to determine the mechanical properties of specimens loaded longitudinally (along the muscle’s line of action) and transversely. The aponeurosis thickness showed significant differences between muscles and sites, while Young’s modulus showed direction-dependent (longitudinal vs. transverse) differences within sites. Results show different morphology and mechanical properties of aponeuroses between synergist muscles. The reason for site-dependent differences in stiffness is due to a reduced aponeurosis thickness rather than a reduction in the material property. The anisotropic elastic feature (differences between longitudinal and transverse directions) of the aponeuroses was more pronounced than previous in vivo findings, suggesting inherent material design of the aponeurosis that matches three-dimensional contractile behavior of muscle fibers.