Design and characterization of small-diameter tissue-engineered blood vessels constructed by electrospun polyurethane-core and gelatin-shell coaxial fiber

Lactobacillus plantae Expressing Porcine Reproductive and Respiratory Syndrome Virus (PRRSV) Single-Chain Antibody Can Inhibit PRRSV Replication and Change the Intestinal Flora Structure of Piglets

Porcine reproductive and respiratory syndrome (PRRS) is an infectious disease that can cause reproductive disorders in sows and affect the breathing of piglets, seriously endangering pig breeding worldwide. In this study, Lactobacillus plantarum NC8 was used as the expression delivery vector of foreign proteins, and a single-chain antibody was designed based on an mAb-PN9cx3 sequence. Three recombinant strains of Lactobacillus plantarum, namely, NC8/pSIP409-pgsA'-PN9cx3-scFV(E), NC8/pSIP409-pgsA'-PN9cx3-HC(E), and NC8/pSIP409-pgsA'-PN9cx3-LC(E), were successfully constructed. In an in vitro test, the viral load of each experimental group was significantly lower than that of the control group (p < 0.01). In the piglet challenge protection test, the percentage of CD3+CD8+T cells in the blood of piglets given complex lactic acid bacteria was significantly increased before and after the challenge (p < 0.01); the body temperature of piglets in this group was normal, the viral load of each organ was reduced, and the obvious pathological changes in each tissue were alleviated. At the same time, the abundance of Bacteroides, Fusobacterium, and other bacteria in the intestinal tracts of the piglets changed, affecting the metabolism of carbohydrates and amino acids and the differentiation of Th1 and Th2 cells. This experiment provides a feasible strategy and method for the design of a PRRSV vaccine.

Microspectrometer-Enabled Real-Time Concentration Monitoring in the Microfluidic Protein Enrichment Chip

This study presents a novel microspectrometer-integrated microfluidic system for real-time protein concentration monitoring. The device employs electrokinetic principles for efficient protein preconcentration in a PDMS and Nafion film channel. Using FITC-labeled BSA as a model protein, the system demonstrated a linear correlation between protein concentration and absorbance at 491 nm. Notably, it achieved a 833-fold concentration increase from an initial 10 nM within 20 min. The compact microspectrometer system offers enhanced accuracy and sensitivity compared to traditional fluorescence microscopy methods. This innovation presents a promising solution for portable and point-of-care diagnostic applications, facilitating timely disease detection and monitoring. The findings highlight the potential for this technology to advance protein analysis and biomarker discovery in clinical settings, potentially improving patient outcomes through enhanced diagnostic capabilities.

[Research progress of electrospinning polyurethane fiber in the field of biomedical tissue engineering]

Polyurethane materials have good biocompatibility, blood compatibility, mechanical properties, fatigue resistance and processability, and have always been highly valued as medical materials. Polyurethane fibers prepared by electrostatic spinning technology can better mimic the structure of natural extracellular matrices (ECMs), and seed cells can adhere and proliferate better to meet the requirements of tissue repair and reconstruction. The purpose of this review is to present the research progress of electrostatically spun polyurethane fibers in bone tissue engineering, skin tissue engineering, neural tissue engineering, vascular tissue engineering and cardiac tissue engineering, so that researchers can understand the practical applications of electrostatically spun polyurethane fibers in tissue engineering and regenerative medicine.

Small-diameter vascular graft composing of core-shell structured micro-nanofibers loaded with heparin and VEGF for endothelialization and prevention of neointimal hyperplasia

Despite the significant progress made in recent years, clinical issues with small-diameter vascular grafts related to low mechanical strength, thrombosis, intimal hyperplasia, and insufficient endothelialization remain unresolved. This study aims to design and fabricate a core-shell fibrous small-diameter vascular graft by co-axial electrospinning process, which will mechanically and biologically meet the benchmarks for blood vessel replacement. The presented graft (PGHV) comprised polycaprolactone/gelatin (shell) loaded with heparin-VEGF and polycaprolactone (core). This study hypothesized that the shell structure of the fibers would allow rapid degradation to release heparin-VEGF, and the core would provide mechanical strength for long-term application. Physico-mechanical evaluation, in vitro biocompatibility, and hemocompatibility assays were performed to ensure safe in vivo applications. After 25 days, the PGHV group released 79.47 ± 1.54% of heparin and 86.25 ± 1.19% of VEGF, and degradation of the shell was observed but the core remained pristine. Both the control (PG) and PGHV groups demonstrated robust mechanical properties. The PGHV group showed excellent biocompatibility and hemocompatibility compared to the PG group. After four months of rat aorta implantation, PGHV exhibited smooth muscle cell regeneration and complete endothelialization with a patency rate of 100%. The novel core-shell structured graft could be pivotal in vascular tissue regeneration application.

The Effect of Plasma Treatment on the Mechanical and Biological Properties of Polyurethane Artificial Blood Vessel

In recent years, the incidence of cardiovascular disease has increased annually, and the demand for artificial blood vessels has been increasing. Due to the formation of thrombosis and stenosis after implantation, the application of many materials in the human body has been inhibited. Therefore, the choice of surface modification process is very important. In this paper, small-diameter polyurethane artificial blood vessels were prepared through electrospinning, and their surfaces were treated with plasma to improve their biological properties. The samples before and after plasma treatment were characterized by SEM, contact angle, XPS, and tensile testing; meanwhile, the cell compatibility and blood compatibility were evaluated. The results show that there are no significant changes to the fiber morphology or diameter distribution on the surface of the sample before and after plasma treatment. Plasma treatment can increase the proportion of oxygen-containing functional groups on the surface of the sample and improve its wettability, thereby increasing the infiltration ability of cells and promoting cell proliferation. Plasma treatment can reduce the risk of hemolysis, and does not cause platelet adhesion. Due to the etching effect of plasma, the mechanical properties of the samples decreased with the extension of plasma treatment time, which should be used as a basis to balance the mechanical property and biological property of artificial blood vessels. But on the whole, plasma treatment has positive significance for improving the comprehensive performance of samples.

Preparation and performance of random- and oriented-fiber membranes with core-shell structures via coaxial electrospinning

The cells and tissue in the human body are orderly and directionally arranged, and constructing an ideal biomimetic extracellular matrix is still a major problem to be solved in tissue engineering. In the field of the bioresorbable vascular grafts, the long-term functional prognosis requires that cells first migrate and grow along the physiological arrangement direction of the vessel itself. Moreover, the graft is required to promote the formation of neointima and the development of the vessel walls while ensuring that the whole repair process does not form a thrombus. In this study, poly (l-lactide-co-ε-caprolactone) (PLCL) shell layers and polyethylene oxide (PEO) core layers with different microstructures and loaded with sodium tanshinone IIA sulfonate (STS) were prepared by coaxial electrospinning. The mechanical properties proved that the fiber membranes had good mechanical support, higher than that of the human aorta, as well as great suture retention strengths. The hydrophilicity of the oriented-fiber membranes was greatly improved compared with that of the random-fiber membranes. Furthermore, we investigated the biocompatibility and hemocompatibility of different functional fiber membranes, and the results showed that the oriented-fiber membranes containing sodium tanshinone IIA sulfonate had an excellent antiplatelet adhesion effect compared to other fiber membranes. Cytological analysis confirmed that the functional fiber membranes were non-cytotoxic and had significant cell proliferation capacities. The oriented-fiber membranes induced cell growth along the orientation direction. Degradation tests showed that the pH variation range had little change, the material mass was gradually reduced, and the fiber morphology was slowly destroyed. Thus, results indicated the degradation rate of the oriented-fiber graft likely is suitable for the process of new tissue regeneration, while the random-fiber graft with a low degradation rate may cause the material to reside in the tissue for too long, which would impede new tissue reconstitution. In summary, the oriented-functional-fiber membranes possessing core-shell structures with sodium tanshinone IIA sulfonate/polyethylene oxide loading could be used as tissue engineering materials for applications such as vascular grafts with good prospects, and their clinical application potential will be further explored in future research.

Construction of spider silk protein small-caliber tissue engineering vascular grafts based on dynamic culture and its performance evaluation

Tissue engineering is an alternative method for preparing small-caliber (<6 mm) vascular grafts. Dynamic mechanical conditioning is being researched as a method to improve mechanical properties of tissue engineered blood vessels. This method attempts to induce unique reaction in implanted cells that regenerate the matrix around them, thereby improving the overall mechanical stability of the grafts. In this study, we used a bioreactor to seed endothelial cells and smooth muscle cells into the inner and outer layers of the electrospun spider silk protein scaffold respectively to construct vascular grafts. The cell proliferation, mechanical properties, blood compatibility and other indicators of the vascular grafts were characterized in vitro. Furthermore, the vascular grafts were implanted in Sprague Dawley rats, and the vascular grafts' patency, extracellular matrix formation, and inflammatory response were evaluated in vivo. We aimed to construct spider silk protein vascular grafts with the potential for in vivo implantation by using a pulsating flow bioreactor. The results showed that, when compared with the static culture condition, the dynamic culture condition improved cell proliferation on vascular scaffolds and enhanced mechanical function of vascular scaffolds. In vivo experiments also showed that the dynamic culture of vascular grafts was more beneficial for the extracellular matrix deposition and anti-thrombogenesis, as well as reducing the inflammatory response of vascular grafts. In conclusion, dynamic mechanical conditioning aid in the resolution of challenges impeding the application of electrospun scaffolds and have the potential to construct small-caliber blood vessels with regenerative function for cardiovascular tissue repair.

Recent advances of natural biopolymeric culture scaffold: synthesis and modification

Traditionally existing 2D culture scaffold has been inappropriately validated due to the failure in generating the precise therapeutic response. Therefore, this leads to the fabrication of 3D culture scaffold resolving the limitations in the in vivo environment. In recent years, tissue engineering played an important role in the field of bio-medical engineering. Biopolymer material, a novel natural material with excellent properties of nontoxic and biodegradable merits can be served as culture scaffold. This review summarizes the modifications of natural biopolymeric culture scaffold with different crosslinkers and their application. In addition, this review provides the recent progress of natural biopolymeric culture scaffold mainly focusing on their properties, synthesizing and modification and application.

Decellularized Scaffold-based Poly(ethylene glycol) Biomimetic Vascular Patches Modified with Polyelectrolyte Multilayer of Heparin and Chitosan: Preparation and Vascular Tissue Engineering Applications in a Porcine Model

The mechanical property mismatch between vascular patches and native blood vessels can result in post-operation failure, so it is important to develop vascular patches that mimic the biomechanical properties of...