Diatom microalgae as smart nanocontainers for biosensing wastewater pollutants: recent trends and innovations

Comparison of the Level and Mechanisms of Toxicity of Nanoparticles of Underwater Welding in Bioassay with Three Marine Microalgae

In this work, the toxicity level of nano- and microparticles obtained by underwater welding was assessed. The toxicity of nano- and microparticles obtained by underwater welding was evaluated on three types of marine microalgae: Heterosigma akashiwo (Ochrophyta), Porphyridium purpureum (Rhodophyta), and Attheya ussuriensis (Bacillariophyta). The aim was to study the environmental risks associated with the ingress of micro- and nanoparticles of metal oxides into the marine environment. Water samples containing suspensions from wet welding and cutting processes were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) to determine heavy metal concentrations. Biotesting included evaluation of growth inhibition, cell size change, and membrane potential of microalgae using flow cytometry. The results showed that samples APL-1 and APL-2 (flux-cored wire) were the most toxic, causing concentration-dependent growth inhibition of H. akashiwo and A. ussuriensis (p < 0.0001) as well as membrane depolarization. For P. purpureum, ELc and ELw (coated electrodes) samples stimulated growth, indicating species-specific responses. The stability of the nanoparticles and their bioavailability were found to play a key role in the mechanisms of toxicity. The study highlights the need to control the composition of materials for underwater welding and to develop environmentally friendly technologies. The data obtained are important for predicting the long-term effects of pollution of marine ecosystems by substances formed during underwater welding.

Textile dye removal using diatomite nanocomposites: a metagenomic study in photosynthetic microalgae-assisted microbial fuel cells

In this study, Coomassie brilliant blue (CBB), brilliant green (BG), and rhodamine (Rh) dyes were used to simulate dye-rich wastewater. Adsorption and degradation of these dyes (2 μM, 10 μM, and 30 μM) on diatomite (DE) were evaluated under light (L) and dark (D) conditions. The adsorption of dye-DE composites followed pseudo-second-order kinetics at all concentrations and conditions had R 2 > 0.99, thus showing a good fit. The calculated equilibrium adsorption amount q e,(cal) was coherent with the value of experimental q e,(exp). The poorest adsorption and photocatalysis occurred at 30 μM, prompting the functionalization of dyes with TiO2 and Fe3O4 nanoparticles (NP(s)). The highest dye degradation efficiencies (DGeff) for 30 μM dyes were 86.79% (CBB-DE-Fe3O4, 72 h), 96.10% (BG-DE-TiO2, 52 h), and 81.74% (Rh-DE-TiO2, 48 h), with Rh-DE-TiO2 showing the fastest degradation. Functionalized DE-dye (30 μM) nanocomposites were further tested in a photosynthetic microalgae-assisted microbial fuel cell with dye-simulated wastewater at the anode (PMA-MFC-1 with CBB-DE-Fe3O4, PMA-MFC-2 with BG-DE-TiO2 and PMA-MFC-3 with Rh-DE-TiO2) and Asterarcys sp. GA4 microalgae at the cathode. In dark anode chambers, PMA-MFC-3 achieved the highest DGeff value of Rh dye as 88.23% and a polarization density of 30.06 mW m-2, outperforming PMA-MFC-2 with BG dye and PMA-MFC-1 with CBB dye. The molecular identifier analysis of microbes in wastewater at the anode showed the dominance of Sphingobacteria and Proteobacteria in PMA-MFC-3 (Rh-DE-TiO2) and COD removal of 61.36%, highlighting its potential for efficient dye degradation and bioelectricity generation. Furthermore, PMA-MFC-3 simultaneously demonstrated a superior microalgal lipid yield of 3.42 μg g-1 and an algal growth of 8.19 μg g-1 at the cathode.

Assessment of heavy metals and environmental stress conditions on the production potential of polyunsaturated fatty acids (PUFAs) in indigenous microalgae isolated from the Gulf of Mannar coastal waters

The present study evaluated the effects of heavy metals, viz., lead, mercury, and cadmium, on growth, chlorophyll a, b, c, carotenoids, and PUFA content of marine microalgae Chlorella sp. and Cylindrotheca fusiformis. At 96-h exposure, the IC50 values for Hg2+, Pb2+, and Cd2+ were 0.85 mg/L, 2.4 mg/L, and 5.3 mg/L respectively, in Chlorella sp. In C. fusiformis, IC50 values for Hg2+, Pb2+, and Cd2+ were 0.5 mg/L, 1.2 mg/L, and 3 mg/L respectively. The pigment contents of both microalgae were significantly affected upon heavy metal exposure. In Chlorella sp. and C. fusiformis, the exposed concentrations of Hg2+ averagely decreased the PUFA content by 76.34% and 78.68%, respectively. Similarly, Pb2+-exposed concentrations resulted in 54.50% and 82.64% average reductions in PUFA content of Chlorella sp. and C. fusiformis, respectively. Cd2+-exposed concentrations showed 32.58% and 40.54% average reduction in PUFA content of Chlorella sp. and C. fusiformis, respectively. Among the environmental stress conditions, the dark treatment has increased total PUFA content by 6.63% in Chlorella sp. and 3.92% in C. fusiformis. It was observed that the 50% nitrogen starvation (two-stage) significantly improved the PUFA production from 26.47 ± 6.55% to 40.92 ± 10.74% in Chlorella sp. and from 11.23 ± 5.01 to 32.8 ± 14.17% in C. fusiformis. The toxicity for both microalgae was followed in the order Hg2+ > Pb2+ > Cd2+. Among the two species, Chlorella sp. has shown a high tolerance to heavy metals and can be effectively utilized in PUFA production.

Degradation of a mixture of 13 polycyclic aromatic hydrocarbons by commercial effective microorganisms

The study focused on the contribution of effective microorganisms (EM) and their consortia, used in commercial biological preparations and formulations for soil revitalization, to the degradation of a mixture of 13 polycyclic aromatic hydrocarbons (PAHs) commonly found in the soil environment. PAHs, diverse forms of which are present in the environment, never occur individually but always as a part of a chemical mixture. Therefore, the research presented in this article, focusing on the EM impact on the mixture of PAHs, reflects the conditions most similar to natural ones. On Day 35 of the experiment, PAH levels decreased by 75.5-95.5%. The highest PAHs degradation efficiency was achieved for fluorene, with a preparation containing eight bacteria strains from the Bacillus genus: B. coagulans, B. amyloliquefaciens, B. laterosporus, B. licheniformis, B. mucilaginosus, B. megaterium, B. polymyxa, and B. pumilus. All tested preparations containing bacterial consortia and a preparation with the yeast S. cerevisiae intensified the PAHs degradation more effectively than formulations including only the yeast Yarrowia lipolytica or a mixture of Debaryomyces hansenii and Bacillus. The designed and proposed research will contribute to the development of biotechnological methods - bioremediation by microorganisms that are safe for the human and environment health.

Biomimetic Sol-Gel Chemistry to Tailor Structure, Properties, and Functionality of Bionanocomposites by Biopolymers and Cells

Biosilica, synthesized annually only by diatoms, is almost 1000 times more abundant than industrial silica. Biosilicification occurs at a high rate, although the concentration of silicic acid in natural waters is ~100 μM. It occurs in neutral aqueous solutions, at ambient temperature, and under the control of proteins that determine the formation of hierarchically organized structures. Using diatoms as an example, the fundamental differences between biosilicification and traditional sol-gel technology, which is performed with the addition of acid/alkali, organic solvents and heating, have been identified. The conditions are harsh for the biomaterial, as they cause protein denaturation and cell death. Numerous attempts are being made to bring sol-gel technology closer to biomineralization processes. Biomimetic synthesis must be conducted at physiological pH, room temperature, and without the addition of organic solvents. To date, significant progress has been made in approaching these requirements. The review presents a critical analysis of the approaches proposed to date for the silicification of biomacromolecules and cells, the formation of bionanocomposites with controlled structure, porosity, and functionality determined by the biomaterial. They demonstrated the broad capabilities and prospects of biomimetic methods for creating optical and photonic materials, adsorbents, catalysts and biocatalysts, sensors and biosensors, and biomaterials for biomedicine.

Untargeted metabolomics to expand the chemical space of the marine diatom Skeletonema marinoi

Diatoms (Bacillariophyceae) are aquatic photosynthetic microalgae with an ecological role as primary producers in the aquatic food web. They account substantially for global carbon, nitrogen, and silicon cycling. Elucidating the chemical space of diatoms is crucial to understanding their physiology and ecology. To expand the known chemical space of a cosmopolitan marine diatom, Skeletonema marinoi, we performed High-Resolution Liquid Chromatography-Tandem Mass Spectrometry (LC-MS2) for untargeted metabolomics data acquisition. The spectral data from LC-MS2 was used as input for the Metabolome Annotation Workflow (MAW) to obtain putative annotations for all measured features. A suspect list of metabolites previously identified in the Skeletonema spp. was generated to verify the results. These known metabolites were then added to the putative candidate list from LC-MS2 data to represent an expanded catalog of 1970 metabolites estimated to be produced by S. marinoi. The most prevalent chemical superclasses, based on the ChemONT ontology in this expanded dataset, were organic acids and derivatives, organoheterocyclic compounds, lipids and lipid-like molecules, and organic oxygen compounds. The metabolic profile from this study can aid the bioprospecting of marine microalgae for medicine, biofuel production, agriculture, and environmental conservation. The proposed analysis can be applicable for assessing the chemical space of other microalgae, which can also provide molecular insights into the interaction between marine organisms and their role in the functioning of ecosystems.

Fighting the battle against evolution: designing genetically modified organisms for evolutionary stability

Synthetic biology has made significant progress in many areas, but a major challenge that has received limited attention is the evolutionary stability of synthetic constructs made of heterologous genes. The expression of these constructs in microorganisms, that is, production of proteins that are not necessary for the organism, is a metabolic burden, leading to a decrease in relative fitness and make the synthetic constructs unstable over time. This is a significant concern for the synthetic biology community, particularly when it comes to bringing this technology out of the laboratory. In this review, we discuss the issue of evolutionary stability in synthetic biology and review the available tools to address this challenge.

Recent advances in microbial engineering approaches for wastewater treatment: a review

In the present era of global climate change, the scarcity of potable water is increasing both due to natural and anthropogenic causes. Water is the elixir of life, and its usage has risen significantly due to escalating economic activities, widespread urbanization, and industrialization. The increasing water scarcity and rising contamination have compelled, scientists and researchers, to adopt feasible and sustainable wastewater treatment methods in meeting the growing demand for freshwater. Presently, various waste treatment technologies are adopted across the globe, such as physical, chemical, and biological treatment processes. There is a need to replace these technologies with sustainable and green technology that encourages the use of microorganisms since they have proven to be more effective in water treatment processes. The present review article is focused on demonstrating how effectively various microbes can be used in wastewater treatment to achieve environmental sustainability and economic feasibility. The microbial consortium used for water treatment offers many advantages over pure culture. There is an urgent need to develop hybrid treatment technology for the effective remediation of various organic and inorganic pollutants from wastewater.

Strategies and challenges to enhance commercial viability of algal biorefineries for biofuel production

The rise in energy consumption would quadruple in the coming century and the, existing energy resources might be insufficient to meet the demand of the growing population. An alternative and sustainable energy resource is therefore needed to address the fossil fuel deficiency. The utility of microalgae strains in the aspect of biorefinery has been in research for quite some time. Algal biorefinery is an alternate way of renewable energy however even after decades of research it still suffers from commercialization bottlenecks. The current manuscript reviews the scenarios where the innovation needs an ignition for its commercialization. This review discusses the prospects of up-scale cultivation, and harvesting algal biomass for biorefineries. It narrates algal biorefinery hurdles that can be solved using integrated technology approach, life cycle assessment and applications of nanotechnology. The review also sheds light upon the ties of algal biorefineries with its economic viability.

Artificial mixed microbial system for polycyclic aromatic hydrocarbons degradation

Polycyclic aromatic hydrocarbons (PAHs) are environmental pollutants with major risks to human health. Biological degradation is environmentally friendly and the most appealing remediation method for a wide range of persistent pollutants. Meanwhile, due to the large microbial strain collection and multiple metabolic pathways, PAH degradation via an artificial mixed microbial system (MMS) has emerged and is regarded as a promising bioremediation approach. The artificial MMS construction by simplifying the community structure, clarifying the labor division, and streamlining the metabolic flux has shown tremendous efficiency. This review describes the construction principles, influencing factors, and enhancement strategies of artificial MMS for PAH degradation. In addition, we identify the challenges and future opportunities for the development of MMS toward new or upgraded high-performance applications.

Role of bacterial quorum sensing and quenching mechanism in the efficient operation of microbial electrochemical technologies: A state-of-the-art review

Microbial electrochemical technologies (METs) are a group of innovative technologies that produce valuables like bioelectricity and biofuels with the simultaneous treatment of wastewater from microorganisms known as electroactive microorganisms. The electroactive microorganisms are capable of transferring electrons to the anode of a MET through various metabolic pathways such as direct (via cytochrome or pili) or indirect (through transporters) transfer. Though this technology is promising, the inferior yield of valuables and the high cost of reactor fabrication are presently impeding the large-scale application of this technology. Therefore, to overcome these major bottlenecks, a lot of research has been dedicated to the application of bacterial signalling, for instance, quorum sensing (QS) and quorum quenching (QQ) mechanisms in METs to improve its efficacy in order to achieve a higher power density and to make it more cost-effective. The QS circuit in bacteria produces auto-inducer signal molecules, which enhances the biofilm-forming ability and regulates the bacterial attachment on the electrode of METs. On the other hand, the QQ circuit can effectively function as an antifouling agent for the membranes used in METs and microbial membrane bioreactors, which is imperative for their stable long-term operation. This state-of-the-art review thus distinctly describes in detail the interaction between the QQ and QS systems in bacteria employed in METs to generate value-added by-products, antifouling strategies, and the recent applications of the signalling mechanisms in METs to improve their yield. Further, the article also throws some light on the recent advancements and the challenges faced while incorporating QS and QQ mechanisms in various types of METs. Thus, this review article will help budding researchers in upscaling METs with the integration of the QS signalling mechanism in METs.

Astaxanthin as a King of Ketocarotenoids: Structure, Synthesis, Accumulation, Bioavailability and Antioxidant Properties

Astaxanthin (3,3-dihydroxy-β, β-carotene-4,4-dione) is a ketocarotenoid synthesized by Haematococcus pluvialis/lacustris, Chromochloris zofingiensis, Chlorococcum, Bracteacoccus aggregatus, Coelastrella rubescence, Phaffia rhodozyma, some bacteria (Paracoccus carotinifaciens), yeasts, and lobsters, among others However, it is majorly synthesized by Haematococcus lacustris alone (about 4%). The richness of natural astaxanthin over synthetic astaxanthin has drawn the attention of industrialists to cultivate and extract it via two stage cultivation process. However, the cultivation in photobioreactors is expensive, and converting it in soluble form so that it can be easily assimilated by our digestive system requires downstream processing techniques which are not cost-effective. This has made the cost of astaxanthin expensive, prompting pharmaceutical and nutraceutical companies to switch over to synthetic astaxanthin. This review discusses the chemical character of astaxanthin, more inexpensive cultivating techniques, and its bioavailability. Additionally, the antioxidant character of this microalgal product against many diseases is discussed, which can make this natural compound an excellent drug to minimize inflammation and its consequences.

Efficient removal of Cd2+ by diatom frustules self-modified in situ with intercellular organic components

The organic modification of three-dimensional porous diatom frustules (biosilica) and their fossils (diatomite) is promising in heavy metal adsorption. However, the preparation of such materials involves complex processes, high costs, and environmental hazards. In this study, organic-biosilica composites based on in situ self-modification of diatoms were prepared by freeze-drying pretreatment. Freeze-drying resulted in the release of the intercellular organic components of diatoms, followed by loading on the surface of their diatom frustules. The bio-adsorbent exhibits outstanding Cd²⁺ adsorption capacity (up to 220.3 mg/g). The adsorption isotherms fitted the Langmuir model and the maximum adsorption capacity was 4 times greater than that of diatom biosilica (54.1 mg/g). The adsorption kinetics of Cd²⁺ was adequately described by a pseudo-second-order model and reached equilibrium within 30 min. By combining focused ion beam thinning with transmission electron microscopy-energy dispersive X-ray spectroscopy, the internal structure of the composite and the Cd²⁺ distribution were investigated. The results showed that the organic matter of the composite adsorbed approximately 10 times more Cd²⁺ than inorganic biosilica. The adsorption mechanism was dominated by complexation between the abundant organic functional groups (amide, carboxyl, and amino groups) on the surfaces of composite and Cd²⁺. The bio-adsorbent was demonstrated to have wide applicability in the presence of competitive cations (Na⁺, K⁺, Ca²⁺, and Mg²⁺) and under a wide range of pH (3-10) conditions. Thus, the self-modification of diatoms offers a promising organic-inorganic composite for heavy metal remediation.

The Impact of Metal-Based Nanoparticles Produced by Different Types of Underwater Welding on Marine Microalgae

Underwater wet welding is commonly used in joining pipelines and in underwater construction. Harmful and hazardous compounds are added to many flux-cored wires for underwater welding and cutting, and can have a negative impact on marine life. The specific objective of this study was to evaluate the aquatic toxicity of two suspension samples obtained using welding electrode and flux-cored wire in marine microalgae Attheya ussuriensis and Porphyridium purpureum. Growth rate inhibition, cell size, and biochemical changes in microalgae were evaluated by flow cytometry. The results of the bioassay demonstrated that the suspension obtained after welding with electrode had an acute toxic impact on diatomic microalgae A. ussuriensis, and both tested suspensions revealed chronic toxicity in this microalga with a 40% growth rate inhibition after exposure to 40-50% of prepared suspensions for 7 days. Red algae P. purpureum revealed tolerance to both suspensions caused by exopolysaccharide covering, which prevents the toxic impact of metal cations such as Al, Ti, Mn, Fe, and Zn, which are considered the main toxic components of underwater welding emissions.

Exploring bacterial communities through metagenomics during bioremediation of polycyclic aromatic hydrocarbons from contaminated sediments

The goal of this study was to evaluate the degradation effectiveness of PAHs degrading bacteria at the mesocosm level, including Stenotrophomonas maltophilia (SC), mixed culture (MC), and enriched native microflora (EC) at the mesocosm level. Maximum degradation was found in the mesocosm MC (26.67 %), followed by SC (25.08 %) and EC (18.25 %) after 60 days. Thus, mixed culture and Stenotrophomonas maltophilia could be a game changer in the PAHs bioremediation at the chronically contaminated sites. MiSeq sequencing has revealed dominancy of γ-Proteobacteria, α-Proteobacteria, β-Proteobacteria at class level and Sphingomonadales, oceanospirillales, Rhodothermales at Order level. Families Alcanivoracaceae, Alteromonadaceae, Nocardiaceae, Rhodospirillaceae and genus Stenotrophomonas, Alcanivorax, Methylophaga, Fluviicola and Rhodoplanes were considerably increased which play key role in the PAHs degradation. Dominant bacterial communities have revealed resilience community to enable potential PAHs degradation process in all the mesocosms. To the best our knowledge this is the first ever attempt in PAHs biodegradation study conducted at the mesocosm level mimicking natural environmental conditions. Consequently, this study could be a benchmark against which future progress studies for the policy makers and stakeholders to design appropriate bioremediation study for the historically PAHs polluted contaminate sites.

Prospective review on bioelectrochemical systems for wastewater treatment: Achievements, hindrances and role in sustainable environment

Bioelectrochemical systems (BESs) are a relatively new arena for producing bioelectricity, desalinating sea water, and treating industrial effluents by removing organic matter. Microbial electrochemical technologies (METs) are promising for obtaining value-added products during simultaneous remediation of pollutants from wastewater. The search for more affordable desalination technology has led to the development of microbial desalination cells (MDCs). MDC combines the operation of microbial fuel cells (MFC) with electrodialysis for water desalination and energy generation. It has received notable interest of researchers in desalination and wastewater treatment because of low energy requirement and eco-friendly nature. Firstly, this article provides a brief overview of MDC technology. Secondly, factors affecting functioning of MDC and its applications have been accentuated. Additionally, challenges and future outlook on the development of this technology have been delineated. State-of-the-art information provided in this review would expand the scope of interdisciplinary and translational research.

Sustainable treatment of dye wastewater by recycling microalgal and diatom biogenic materials: Biorefinery perspectives

Discharge of untreated or partially treated toxic dyes containing wastewater from textile industries into water streams is hazardous for environment. The use of heavy metal(s) rich dyes, which are chemically active in azo and sulfur content(s) has been tremendously increasing in last two decades. Conventional physical and chemical treatment processes help to eliminate the dyes from textile wastewater but generates the secondary pollutants which create an additional environmental problem. Microalgae especially the diatoms are promising candidate for dye remediation from textile wastewater. Nanoporous diatoms frustules doped with nanocomposites increase the wastewater remediation efficiency due to their adsorption properties. On the other hand, microalgae with photosynthetic microbial fuel cell have shown significant results in being efficient, cost effective and suitable for large scale phycoremediation. This integrated system has also capability to enhance lipid and carotenoids biosynthesis in microalgae while simultaneously generating the bioelectricity. The present review highlights the textile industry wastewater treatment by live and dead diatoms as well as microalgae such as Chlorella, Scenedesmus, Desmodesmus sp. etc. This review engrosses applicability of diatoms and microalgae as an alternative way of conventional dye removal techniques with techno-economic aspects.

A techno-economic approach for eliminating dye pollutants from industrial effluent employing microalgae through microbial fuel cells: Barriers and perspectives

Microbial fuel cells are biochemical factories which besides recycling wastewater are electricity generators, if their low power density can be scaled up. This also adds up to work on many factors responsible to increase the cost of running a microbial fuel cell. As a result, the first step is to use environment friendly dead organic algae biomass or even living algae cells in a microbial fuel cell, also referred to as microalgal microbial fuel cells. This can be a techno-economic aspect not only for treating textile wastewater but also an economical way of obtaining value added products and bioelectricity from microalgae. Besides treating wastewater, microalgae in its either form plays an essential role in treating dyes present in wastewater which essentially include azo dyes rich in synthetic ions and heavy metals. Microalgae require these metals as part of their metabolism and hence consume them throughout the integration process in a microbial fuel cell. In this review a detail plan is laid to discuss the treatment of industrial effluents (rich in toxic dyes) employing microbial fuel cells. Efforts have been made by researchers to treat dyes using microbial fuel cell alone or in combination with catalysts, nanomaterials and microalgae have also been included. This review therefore discusses impact of microbial fuel cells in treating wastewater rich in textile dyes its limitations and future aspects.

A critical review on microbes-based treatment strategies for mitigation of toxic pollutants

Contamination of the environment through toxic pollutants poses a key risk to the environment due to irreversible environmental damage(s). Industrialization and urbanization produced harmful elements such as petrochemicals, agrochemicals, pharmaceuticals, nanomaterials, and herbicides that are intentionally or unintentionally released into the water system, threatening biodiversity, the health of animals, and humans. Heavy metals (HMs) in water, for example, can exist in a variety of forms that are inclined by climate features like the presence of various types of organic matter, pH, water system hardness, transformation, and bioavailability. Biological treatment is an important tool for removing toxic contaminants from the ecosystem, and it has piqued the concern of investigators over the centuries. In situ bioremediation such as biosparging, bioventing, biostimulation, bioaugmentation, and phytoremediation and ex-situ bioremediation includes composting, land farming, biopiles, and bioreactors. In the last few years, scientific understanding of microbial relations with particular chemicals has aided in the protection of the environment. Despite intensive studies being carried out on the mitigation of toxic pollutants, there have been limited efforts performed to discuss the solutions to tackle the limitations and approaches for the remediation of heavy metals holistically. This paper summarizes the risk assessment of HMs on aquatic creatures, the environment, humans, and animals. The content of this paper highlights the principles and limitations of microbial remediation to address the technological challenges. The coming prospect and tasks of evaluating the impact of different treatment skills for pollutant remediation have been reviewed in detail. Moreover, genetically engineered microbes have emerged as powerful bioremediation capabilities with significant potential for expelling toxic elements. With appropriate examples, current challenging issues and boundaries related to the deployment of genetically engineered microbes as bioremediation on polluted soils are emphasized.

Employing newly developed plastic bubble wrap technique for biofuel production from diatoms cultivated in discarded plastic waste

Algal culturing in photobioreactors for biofuel and other value-added products is a challenge globally specifically due to expensive closed or open photobioreactors associated with the high cost, problems of water loss and contamination. Among the wide varieties of microalgae, diatoms have come out as potential source for crude oil in the form of Diafuel™ (biofuel from diatoms). However, culturing diatoms at large scale hypothesized as diatom solar panels for biofuel production is still facing a need for facile and economical production of value-added products. The aim of this work was to culture diatom (microalgae) in a closed system by sealing the reactor rim tightly with very cheap priced and used plastic bubble wrap material which is generally discarded in a lodging and transportation of goods. To optimize it, different plastic wraps discarded from a plastic industry were tested first for their permeability to gases and impermeability to water loss. It was found that among different varieties of plastic bubble wraps, low density polyethylene (LDPE) bubble wrap material which was used to seal glass containers as photobioreactors allowed harvest of maximum Diafuel™ (37%), lipid (35 μgmL^-1), highest cell count (1152 × 10² cells mL^-1), maximum CO₂ absorbance (0.084) with almost no water loss and nutrient uptake for 40 days of experiments. This was due to its permeability to gases and impermeability to water. To check usability of such LDPE bubble wrap on other microalgae it was therefore tested on the red-green microalgae Haematococcus pluvialis, which showed scope to be scaled up for astaxanthin production using discarded bubble wrap packing material. This study thus would open up a new way for decreasing plastic disposal and with reuse for sustainable development and application of diatom in biofuel production which could find applications in environmental and industrial sectors.

Genetic modifications associated with sustainability aspects for sustainable developments

Sustainable development serves as the foundation for a range of international and national policymaking. Traditional breeding methods have been used to modify plant genomes and production. Genetic engineering is the practice of assisting agricultural systems in adapting to rapidly changing global growth by hastening the breeding of new varieties. On the other hand, the development of genetic engineering has enabled more precise control over the genomic alterations made in recent decades. Genetic changes from one species can now be introduced into a completely unrelated species, increasing agricultural output or making certain elements easier to manufacture. Harvest plants and soil microorganisms are just a few of the more well-known genetically modified creatures. Researchers assess current studies and illustrate the possibility of genetically modified organisms (GMOs) from the perspectives of various stakeholders. GMOs increase yields, reduce costs, and reduce agriculture's terrestrial and ecological footprint. Modern technology benefits innovators, farmers, and consumers alike. Agricultural biotechnology has numerous applications, each with its own set of potential consequences. This will be able to reach its full potential if more people have access to technology and excessive regulation is avoided. This paper covers the regulations for genetically modified crops (GMCs) as well as the economic implications. It also includes sections on biodiversity and environmental impact, as well as GMCs applications. This recounts biotechnological interventions for long-term sustainability in the field of GMCs, as well as the challenges and opportunities in this field of research.Abbreviations: GMCs-Genetically modified crops; GMOs- Genetically modified organisms; GE- Genetic engineering; Bt- Bacillus thuringiensisNIH- National Institutes of Health; FDA- Food and Drug Administration; HGT- Horizontal gene transfer; GM- Genetically modified; rDNA- Ribosomal deoxyribonucleic acid; USDA- United States Department of Agriculture; NIH- National Institutes of Health.

A review on biofiltration techniques: Recent advancements in the removal of volatile organic compounds and heavy metals in the treatment of polluted water

Good quality of water determines the healthy life of living beings on this earth. The cleanliness of water was interrupted by the pollutants emerging out of several human activities. Industrialization, urbanization, heavy population, and improper disposal of wastes are found to be the major reasons for the contamination of water. Globally, the inclusion of volatile organic compounds (VOCs) and heavy metals released by manufacturing industries, pharmaceuticals, and petrochemical processes have created environmental issues. The toxic nature of these pollutants has led researchers, scientists, and industries to exhibit concern towards the complete eradication of them. In this scenario, the development of wastewater treatment methodologies at low cost and in an eco-friendly way had gained importance at the international level. Recently, bio-based technologies were considered for environmental remedies. Biofiltration based works have shown a significant result for the removal of volatile organic compounds and heavy metals in the treatment of wastewater. This was done with several biological sources such as bacteria, fungi, algae, plants, yeasts, etc. The biofiltration technique is cost-effective, simple, biocompatible, sustainable, and eco-friendly compared to conventional techniques. This review article provides deep insight into biofiltration technologies engaged in the removal of volatile organic compounds and heavy metals in the wastewater treatment process.

Plant microbe based remediation approaches in dye removal: A review

Increased industrialization demand using synthetic dyes in the newspaper, cosmetics, textiles, food, and leather industries. As a consequence, harmful chemicals from dye industries are released into water reservoirs with numerous structural components of synthetic dyes, which are hazardous to the ecosystem, plants and humans. The discharge of synthetic dye into various aquatic environments has a detrimental effect on the balance and integrity of ecological systems. Moreover, numerous inorganic dyes exhibit tolerance to degradation and repair by natural and conventional processes. So, the present condition requires the development of efficient and effective waste management systems that do not exacerbate environmental stress or endanger other living forms. Numerous biological systems, including microbes and plants, have been studied for their ability to metabolize dyestuffs. To minimize environmental impact, bioremediation uses endophytic bacteria, which are plant beneficial bacteria that dwell within plants and may improve plant development in both normal and stressful environments. Moreover, Phytoremediation is suitable for treating dye contaminants produced from a wide range of sources. This review article proves a comprehensive evaluation of the most frequently utilized plant and microbes as dye removal technologies from dye-containing industrial effluents. Furthermore, this study examines current existing technologies and proposes a more efficient, cost-effective method for dye removal and decolorization on a big scale. This study also aims to focus on advanced degradation techniques combined with biological approaches, well regarded as extremely effective treatments for recalcitrant wastewater, with the greatest industrial potential.