Decontamination of Aflatoxins in Edible Oils: A Comprehensive Review

Detection of foodborne pathogens in contaminated food using nanomaterial-based electrochemical biosensors

Foodborne pathogens are a grave concern for the for food, medical, environmental, and economic sectors. Their ease of transmission and resistance to treatments, such as antimicrobial agents, make them an important challenge. Food tainted with these pathogens is swiftly rejected, and if ingested, can result in severe illnesses and even fatalities. This review provides and overview of the current status of various pathogens and their metabolites transmitted through food. Despite a plethora of studies on treatments to eradicate and inhibit these pathogens, their indiscriminate use can compromise the sensory properties of food and lead to contamination. Therefore, the study of detection methods such as electrochemical biosensors has been proposed, which are devices with advantages such as simplicity, fast response, and sensitivity. However, these biosensors may also present some limitations. In this regard, it has been reported that nanomaterials with high conductivity, surface-to-volume ratio, and robustness have been observed to improve the detection of foodborne pathogens or their metabolites. Therefore, in this work, we analyze the detection of pathogens transmitted through food and their metabolites using electrochemical biosensors based on nanomaterials.

Aflatoxins in Wheat Grains: Detection and Detoxification through Chemical, Physical, and Biological Means

Wheat (Triticum aestivum L.) is an essential food crop in terms of consumption as well as production. Aflatoxin exposure has a widespread public health impact in economically developing nations, so there is a need to establish preventive techniques for these high-risk populations. Pre-harvest and post-harvest practices are the two strategies used to control aflatoxin contamination, which include the use of genetically modified crops that show resistance against Aspergillus infection, the use of pesticides, changing the planting and harvesting time of crops, and physical, chemical, and biological methods. In this research, aflatoxin detection and quantification were performed in different wheat varieties to determine quantitative differences in comparison to the European Commission's limit of 4 ppb aflatoxins in wheat. TLC for qualitative and the ELISA kit method for quantitative analysis of aflatoxins were used. Out of 56 samples, 35 were found contaminated with aflatoxins, while the remaining 21 samples did not show any presence of aflatoxins. Out of the 35 contaminated samples, 20 samples showed aflatoxin contamination within the permissible limit, while the remaining 15 samples showed aflatoxin concentration beyond the permissible level, ranging from 0.49 to 20.56 ppb. After quantification, the nine highly contaminated wheat samples were detoxified using physical, chemical, and biological methods. The efficiency of these methods was assessed, and they showed a significant reduction in aflatoxins of 53-72%, 79-88%, and 80-88%, respectively. In conclusion, the difference in aflatoxin concentration in different wheat varieties could be due to genetic variations. Furthermore, biological treatment could be the method of choice for detoxification of aflatoxins in wheat as it greatly reduced the aflatoxin concentration with no harmful effect on the quality of the grains.

Expression and application of aflatoxin degrading enzyme gene in Pichia pastoris

In this study, three aflatoxin degrading enzyme genes, tv-adtz, arm-adtz and cu-adtz, were heterologously expressed in Pichia pastoris. The protein expression of the enzyme solution was detected by sodium dodecyl sulfate polyacrylamide gel electrophoresis, and the results showed that specific protein bands were detected and the target genes were successfully integrated into Pichia pastoris. The enzyme activities and detoxification efficiency of TV-ADTZ, Arm-ADTZ and Cu-ADTZ crude enzyme solutions were detected, and the highest enzyme activities were up to 3.57, 4.30, and 2.41 U mL-1 , and the highest degradation rates were up to 45.58%, 60.0% and 34.21%, respectively. Arm-ADTZ with the best degradation effect was selected and designed for detoxification application experiments to test its detoxification efficiency of AFB1 in aqueous phase and in the process of moldy ground corn and preparation of DDGS, respectively, and the degradation rates reached 78.94%, 56.48%, and 24.31% after 24 h of reaction, respectively. Thus, it can be seen that the aflatoxin-degrading enzyme gene was successfully integrated into Pichia pastoris and secreted for expression, and the expressed product could effectively degrade AFB1 .

Prevalence and concentration of aflatoxin M1 and ochratoxin A in cheese: a global systematic review and meta-analysis and probabilistic risk assessment

Exposure to mycotoxins such as aflatoxins can endanger human health, especially infants and children. In this study, an attempt was made to retrieved studies related to the concentration of aflatoxin M1 (AFM1) and ochratoxin A (OTA). Search was performed in international databases such as Embase, PubMed, Scopus, and Web of Science for the period 1 January 2010 to 20 February 2023. Then, the pooled concentration in the defined subgroups was calculated using meta-analysis and the health risk assessment was conducted by margin of exposure (MOEs). Thirty-one scientific papers with 34 data reports (Sample size=2,277) were included in our study. The lowest and highest prevalence of AFM1 in cheese was related to El Salvador (12.18 %) and Serbia (100.00 %). The pooled prevalence of AFM1 was 49.85 %, 95 %CI (37.93-61.78 %). The lowest and highest prevalence of OTA in cheese was related to Türkiye (6.67 %) and Italy (44.21 %). The pooled prevalence of OTA was 35.64 %, 95 %CI (17.16-56.44 %). Health risk of AFM1 revealed that except Pakistan and Iran, MOE in the other countries was lower than 10,000 for adults and also except Pakistan, MOE for other countries was lower than 10,000 for children. Health risk of OTA revealed that except Greece, MOE in the other countries was higher than 10,000 for adults and also except Germany and Greece, MOE for other countries was higher than 10,000 for children. Therefore, it is recommended to conduct control plans to reduce the concentration of mycotoxins in cheese, especially AFM1.

Inhibition of aflatoxins on UDP-glucuronosyltransferases (UGTs)

Aflatoxins have been recognized as the most harmful mycotoxins leading to various toxic effects. The present study aims to determine the inhibition behavior of aflatoxins on the activity of the important phase II metabolizing enzymes, UDP-glucuronosyltransferases (UGTs), based on in vitro incubation system of recombinant human UGTs-catalyzed glucuronidation of 4-methylumbelliferone (4-MU). 100 μM AFB1 and AFG1 exhibited extensive inhibition towards UGT isoforms especially UGT1A7 and UGT1A8, with the inhibition ratios to be 71.38%, 72.95% and 72.79% for AFB1 to UGT1A7, AFB1 to UGT1A8 and AFG1 to UGT1A8, respectively. Molecular docking results showed that hydrogen bonds and hydrophobic contacts of the particular structure consisting of double furan ring with double bond contributed to the interaction of aflatoxins and UGTs. Kinetics analysis, including inhibition types and kinetics parameters (K_i), and in vitro-in vivo extrapolation (IVIVE) indicated that there might be a medium possibility of inhibition on UGTs by aflatoxins in vivo. In conclusion, the present study indicated that aflatoxins could possibly disturb endogenous metabolism by inhibiting the activity of UGTs so as to exhibit toxic effects.

Efficient and simultaneous removal of aflatoxin B1, B2, G1, G2, and zearalenone from vegetable oil by use of a metal-organic framework absorbent

Vegetable oils are usually cocontaminated with different mycotoxins, including aflatoxins and zearalenone, which cause significant food safety issues. Establishment of multitarget, high-efficiency, and low-cost adsorption methods are considered to be ideal solutions for mycotoxin removal in vegetable oils. In this study, we used metal-organic frameworks (MOFs) were used for the simultaneous removal of aflatoxins and zearalenone from vegetable oils. The results showed that MOF-235 simultaneously removed, within 30 min, more than 96.1% of aflatoxins and 83.3% of zearalenone from oils, and oils treated with MOF-235 exhibited di minimis cytotoxicity. Thus, synthesized MOF-235 exhibited sufficient efficacy to remove the targeted residues, as well as safety and reusability, which could be applied as a novel potential adsorbent in the removal of multiple mycotoxins from contaminated vegetable oils.

MOF-Based Mycotoxin Nanosensors for Food Quality and Safety Assessment through Electrochemical and Optical Methods

Mycotoxins in food are hazardous for animal and human health, resulting in food waste and exacerbating the critical global food security situation. In addition, they affect commerce, particularly the incomes of rural farmers. The grave consequences of these contaminants require a comprehensive strategy for their elimination to preserve consumer safety and regulatory compliance. Therefore, developing a policy framework and control strategy for these contaminants is essential to improve food safety. In this context, sensing approaches based on metal-organic frameworks (MOF) offer a unique tool for the quick and effective detection of pathogenic microorganisms, heavy metals, prohibited food additives, persistent organic pollutants (POPs), toxins, veterinary medications, and pesticide residues. This review focuses on the rapid screening of MOF-based sensors to examine food safety by describing the main features and characteristics of MOF-based nanocomposites. In addition, the main prospects of MOF-based sensors are highlighted in this paper. MOF-based sensing approaches can be advantageous for assessing food safety owing to their mobility, affordability, dependability, sensitivity, and stability. We believe this report will assist readers in comprehending the impacts of food jeopardy exposure, the implications on health, and the usage of metal-organic frameworks for detecting and sensing nourishment risks.

Recent Progress on Techniques in the Detection of Aflatoxin B1 in Edible Oil: A Mini Review

Contamination of agricultural products and foods by aflatoxin B1 (AFB1) is becoming a serious global problem, and the presence of AFB1 in edible oil is frequent and has become inevitable, especially in underdeveloped countries and regions. As AFB1 results from a possible degradation of aflatoxins and the interaction of the resulting toxic compound with food components, it could cause chronic disease or severe cancers, increasing morbidity and mortality. Therefore, rapid and reliable detection methods are essential for checking AFB1 occurrence in foodstuffs to ensure food safety. Recently, new biosensor technologies have become a research hotspot due to their characteristics of speed and accuracy. This review describes various technologies such as chromatographic and spectroscopic techniques, ELISA techniques, and biosensing techniques, along with their advantages and weaknesses, for AFB1 control in edible oil and provides new insight into AFB1 detection for future work. Although compared with other technologies, biosensor technology involves the cross integration of multiple technologies, such as spectral technology and new nano materials, and has great potential, some challenges regarding their stability, cost, etc., need further studies.

Invited review: Remediation strategies for mycotoxin control in feed

Mycotoxins are secondary metabolites of different species of fungi. Aflatoxin B1 (AFB1), deoxynivalenol (DON), zearalenone (ZEN) and fumonisin B1 (FB1) are the main mycotoxins contaminating animal feedstuffs. These mycotoxins can primarily induce hepatotoxicity, immunotoxicity, neurotoxicity and nephrotoxicity, consequently cause adverse effects on the health and performance of animals. Therefore, physical, chemical, biological and nutritional regulation approaches have been developed as primary strategies for the decontamination and detoxification of these mycotoxins in the feed industry. Meanwhile, each of these techniques has its drawbacks, including inefficient, costly, or impractically applied on large scale. This review summarized the advantages and disadvantages of the different remediation strategies, as well as updates of the research progress of these strategies for AFB1, DON, ZEN and FB1 control in the feed industry.

Recombinant Expression of Trametes versicolor Aflatoxin B1-Degrading Enzyme (TV-AFB1D) in Engineering Pichia pastoris GS115 and Application in AFB1 Degradation in AFB1-Contaminated Peanuts

Aflatoxins seriously threaten the health of humans and animals due to their potential carcinogenic properties. Enzymatic degradation approach is an effective and environmentally friendly alternative that involves changing the structure of aflatoxins. In this study, Trametes versicolor aflatoxin B₁-degrading enzyme gene (TV-AFB₁D) was integrated into the genome of Pichia pastoris GS115 by homologous recombination approach. The recombinant TV-AFB₁D was expressed in engineering P. pastoris with a size of approximately 77 kDa under the induction of methanol. The maximum activity of TV-AFB₁D reached 17.5 U/mL after the induction of 0.8% ethanol (v/v) for 84 h at 28 °C. The AFB₁ proportion of 75.9% was degraded using AFB₁ standard sample after catalysis for 12 h. In addition, the AFB₁ proportion was 48.5% using AFB₁-contaminated peanuts after the catalysis for 18 h at 34 °C. The recombinant TV-AFB₁D would have good practical application value in AFB₁ degradation in food crops. This study provides an alternative degrading enzyme for the degradation of AFB₁ in aflatoxin-contaminated grain and feed via enzymatic degradation approach.

Application of new technologies in decontamination of mycotoxins in cereal grains: Challenges, and perspectives

Emerging decontamination technologies have been attracted considerable attention to address the consumers' demand for high quality and safe food products. As one of the important foods in the human diet, cereals are usually stored for long periods, resulting in an increased risk of contamination by different hazards. Mycotoxins comprise one of the significant contaminants of cereals that lead to enormous economic losses to the industry and threats to human health. While prevention is the primary approach towards reducing human exposure to mycotoxins, decontamination methods have also been developed as complementary measures. However, some conventional methods (chemical treatments) do not fulfill industries' expectations due to limitations like safety, efficiency, and the destruction of food quality attributes. In this regard, novel techniques have been proposed to food to comply with the industry's demand and overcome conventional methods' limitations. Novel techniques have different efficiencies for removing or reducing mycotoxins depending on processing conditions, type of mycotoxin, and the food matrix. Therefore, this review provides an overview of novel mycotoxin decontamination technologies such as cold plasma, irradiation, and pulse light, which can be efficient for reducing mycotoxins with minimum adverse effects on the quality and nutritional properties of produce.

A review on graphene-based electrochemical sensor for mycotoxins detection

This work focuses on the study of nanomaterial-based sensors for mycotoxins detection. Due to their adverse effects on humans and animals, mycotoxins are heavily regulated, and the foodstuff and feed stocks with a high probability of being contaminated are often analyzed. In this context, the recent developments in graphene-based electrochemical sensors for mycotoxins detection were examined. The mycotoxins' toxicity implications on their detection and the development of diverse recognition elements are described considering the current challenges and limitations.