The structural properties of GaN/AlN core-shell nanocolumn heterostructures

Atomic Layer Deposition and Strain Analysis of Epitaxial GaN-ZnO Core-Shell Nanowires

We demonstrate the epitaxial coating of GaN NWs with an epitaxial ZnO shell by atomic layer deposition at 300 °C. Scanning transmission electron microscopy proves a sharp and defect-free coherent interface. The strain in the core-shell structure due to the lattice mismatch and different thermal expansion coefficients of GaN and ZnO was analyzed using 4D-STEM strain mapping and Raman spectroscopy and compared to theoretical calculations. The results highlight the outstanding advantages of epitaxial shell growth using atomic layer deposition, e.g., conformal coating and precise thickness control.

Ultrathin GaN quantum wells in AlN nanowires for UV-C emission

Molecular beam epitaxy growth and optical properties of GaN quantum disks in AlN nanowires were investigated, with the purpose of controlling the emission wavelength of AlN nanowire-based light emitting diodes. Besides GaN quantum disks with a thickness ranging from 1 to 4 monolayers, a special attention was paid to incomplete GaN disks exhibiting lateral confinement. Their emission consists of sharp lines which extend down to 215 nm, in the vicinity of AlN band edge. The room temperature cathodoluminescence intensity of an ensemble of GaN quantum disks embedded in AlN nanowires is about 20% of the low temperature value, emphasizing the potential of ultrathin/incomplete GaN quantum disks for deep UV emission.

Resonant Raman scattering of core-shell GaN/AlN nanowires

We have analyzed the electron-phonon coupling in GaN/AlN core-shell nanowires by means of Raman scattering excited at various wavelengths in the ultraviolet spectral range (335, 325 and 300 nm) and as a function of the AlN shell thickness. The detailed analysis of the multi-phonon spectra evidences important differences with excitation energy. Under 325 and 300 nm excitation the Raman process is mediated by the allowedA₁(LO) phonon mode, where the atoms vibrate along the NW axis. Considering its selection rules, this mode is easily accessible in backscattering along the wurtzitecaxis. Interestingly, for 335 nm excitation the scattering process is instead mediated by theE₁(LO) phonon mode, where atoms vibrate in thec-plane and that is forbidden in this configuration. This change is ascribed to the band anticrossing caused by the uniaxial strain imposed by the AlN shell and the proximity, at this particular excitation energy, of real electronic transitions separated by the energy of the longitudinal optical phonon modes. The energy and character of the electronic bands can be tuned by varying the AlN shell thickness, a degree of freedom unique to core-shell nanowires. The interpretation of the experimental results is supported by calculations of the electronic transitions of GaN under uniaxial strain performed within the framework of ak · pmodel.

On the piezotronic behaviours of wurtzite core-shell nanowires

The piezotronic behaviours of wurtzite core-shell nanowires (NWs) are studied in this paper by using a multiscale modelling technique. A difference between piezopotentials obtained from molecular dynamics simulations and finite element calculations indicates that due to the influence of small-scale effects the widely used conventional electromechanical theory is not accurate in describing the piezopotential properties of the present core-shell NWs. Although the residual strains intrinsically existing in core-shell NWs and the structural reconstruction at their surface and interface both account for these small-scale effects, the latter is found to play the dominate role, which makes the material properties of core-shell NWs significantly depend on their geometric size. A novel core-interface-shell-surface model is proposed here to analytically describe the size dependence of the material properties and thus the small-scale effects on the piezopotential of core-shell NWs. Besides possessing a good piezoelectric performance, our density functional theory calculations also show that the core-shell NWs under external loading can retain the semiconducting properties, which confirms the existence of piezotronic effects in them. However, owing to the intrinsic asymmetric Schottky barriers at the source and drain contacts induced by residual piezopotentials in core-shell NWs, the piezotronic effects of core-shell NWs are different to those of their conventional single-component counterparts. The superb piezopotential properties and unique piezotronic behaviours observed in wurtzite core-shell NWs make them good candidates for high performance components in novel piezotronic nanodevices.

Evidence and control of unintentional As-rich shells in GaAs1-x P x nanowires

We report on the detailed composition of ternary GaAsP nanowires (NWs) grown using self-catalyzed vapor-liquid-solid (VLS) growth by molecular beam epitaxy. We evidence the formation of an unintentional shell, which enlarges by vapor-solid growth concurrently to the main VLS-grown core. The NW core and unintentional shell have typically different chemical compositions if no effort is made to adjust the growth conditions. The compositions can be made equal by changing the substrate temperature and the P/As flux ratio in the vapor phase. In all cases, we still observe the existence of a P-rich interface between the GaAsP NW core and the unintentional shell, even if favorable growth conditions are used.

UV LEDs based on p-i-n core-shell AlGaN/GaN nanowire heterostructures grown by N-polar selective area epitaxy

Ultraviolet light-emitting diodes fabricated from N-polar AlGaN/GaN core-shell nanowires (NWs) with p-i-n structure produced electroluminescence at 365 nm with ∼5× higher intensities than similar GaN homojunction LEDs. The improved characteristics were attributed to localization of spontaneous recombination to the NW core, reduction of carrier overflow losses through the NW shell, and elimination of current shunting. Poisson-drift-diffusion modeling indicated that a shell Al mole fraction of x = 0.1 in Al x Ga1-x N effectively confines electrons and injected holes to the GaN core region. AlGaN overcoat layers targeting this approximate Al mole fraction were found to possess a low-Al-content tip and high-Al-content shell, as determined by scanning transmission electron microscopy. Photoluminescence spectroscopy further revealed the actual Al mole fraction to be NW diameter-dependent, where the tip and shell compositions converged towards the nominal flux ratio for large diameter NWs.

Triaxially uniform high-quality Al x Ga(1-x)N (x ∼ 50%) nanowires on template free sapphire substrate

We have demonstrated the growth of high-quality Al _x Ga_(1-x)N (x ∼ 50%) nanowires (NWs) for the first time on the sapphire substrate without using GaN NWs as the template, by plasma-assisted molecular beam epitaxy. Our newly developed process elucidates that depending on the substrate temperature and V/III ratio an AlGaN network is formed on sapphire substrate prior to the NWs growth. We find that the ledges of this kinked shaped network act as nucleation sites for the NW growth. The present observations suggest that availability of nucleation sites and higher substrate temperature during growth are the key parameters for the growth of homogeneous AlGaN NWs on the sapphire substrates. Energy dispersive x-ray spectroscopy, high-resolution transmission electron microscopy, Raman spectroscopy, x-ray diffraction, photoluminescence spectroscopy, and scanning electron microscopy analysis show that AlGaN NWs exhibit near-atomic scale compositional uniformity along the length as well as across the diameter.

Selective area growth of AlN/GaN nanocolumns on (0001) and (11-22) GaN/sapphire for semi-polar and non-polar AlN pseudo-templates

Despite the strong interest in optoelectronic devices working in the deep ultraviolet range, no suitable low cost, large-area, high-quality AlN substrates have been available up to now. The aim of this work is the selective area growth of AlN nanocolumns by plasma assisted molecular beam epitaxy on polar (0001) and semi-polar (11-22) GaN/sapphire templates. The resulting AlN nanocolumns are vertically oriented with semi-polar {1-103} top facets when grown on (0001) GaN/sapphire, or oriented at 58° from the template normal and exposing {1-100} non-polar top facets when growing on (11-22) GaN/sapphire, in both cases reaching filling factors ≥80%. In these kinds of arrays each nanostructure could function as a building block for an individual nano-device or, due to the large filling factor values, the overall array top surfaces could be seen as a quasi (semi-polar or non-polar) AlN pseudo-template.

Surface passivation and self-regulated shell growth in selective area-grown GaN-(Al,Ga)N core-shell nanowires

The large surface-to-volume ratio of GaN nanowires implicates sensitivity of the optical and electrical properties of the nanowires to their surroundings. The implementation of an (Al,Ga)N shell with a larger band gap around the GaN nanowire core is a promising geometry to seal the GaN surface. We investigate the luminescence and structural properties of selective area-grown GaN-(Al,Ga)N core-shell nanowires grown on Si and diamond substrates. While the (Al,Ga)N shell allows a suppression of yellow defect luminescence from the GaN core, an overall intensity loss due to Si-related defects at the GaN/(Al,Ga)N interface has been observed in the case of Si substrates. Scanning transmission electron microscopy measurements indicate a superior crystal quality of the (Al,Ga)N shell along the nanowire side facets compared to the (Al,Ga)N cap at the top facet. A nucleation study of the (Al,Ga)N shell reveals a pronounced bowing of the nanowires along the c-direction after a short deposition time which disappears for longer growth times. This is assigned to an initially inhomogeneous shell nucleation. A detailed study of the proceeding shell growth allows the formulation of a strain-driven self-regulating (Al,Ga)N shell nucleation model.

Strain-Induced Band Gap Engineering in Selectively Grown GaN-(Al,Ga)N Core-Shell Nanowire Heterostructures

We demonstrate the selective area growth of GaN-(Al,Ga)N core-shell nanowire heterostructures directly on Si(111). Photoluminescence spectroscopy on as-grown nanowires reveals a strong blueshift of the GaN band gap from 3.40 to 3.64 eV at room temperature. Raman measurements relate this shift to compressive strain within the GaN core. On the nanoscale, cathodoluminescence spectroscopy and scanning transmission electron microscopy prove the homogeneity of strain-related luminescence along the nanowire axis and the absence of significant fluctuations within the shell, respectively. A comparison of the experimental findings with numerical simulations indicates the absence of a significant defect-related strain relaxation for all investigated structures, with a maximum compressive strain of -3.4% for a shell thickness of 50 nm. The accurate control of the nanowire dimensions, namely, core diameter, shell thickness, and nanowire period, via selective area growth allows a specific manipulation of the resulting strain within individual nanowires on the same sample. This, in turn, enables a spatially resolved adjustment of the GaN band gap with an energy range of 240 meV in a one-step growth process.

Quantum Dot-Like Behavior of Compositional Fluctuations in AlGaN Nanowires

We report on the structural and optical properties of AlxGa(1-x)N nanowire sections grown by plasma-assisted molecular beam epitaxy on GaN nanowire bases used as a template. Based on a combination of scanning electron microscopy, microphotoluminescence, time-resolved microphotoluminescence, and photon correlation experiments, it is shown that compositional fluctuations in AlxGa(1-x)N sections associated with carrier localization optically behave as quantum dots. Moreover, most of the micro-optical properties of such fluctuations are demonstrated to be very little dependent on kinetic growth parameters such as AlxGa(1-x)N growth temperature and AlN molar fraction in the alloy, which govern the macrostructural properties of AlxGa(1-x)N sections.

Mapping of Strain Fields in GaAs/GaAsP Core-Shell Nanowires with Nanometer Resolution

We report the nanoscale quantification of strain in GaAs/GaAsP core-shell nanowires. By tracking the shifting of higher-order Laue zone (HOLZ) lines in convergent beam electron diffraction patterns, we observe unique variations in HOLZ line separation along different facets of the core-shell structure, demonstrating the nonuniform strain fields created by the heterointerface. Furthermore, through the use of continuum mechanical modeling and Bloch wave analysis we calculate expected HOLZ line shift behavior, which are directly matched to experimental results. This comparison demonstrates both the power of electron microscopy as a platform for nanoscale strain characterization and the reliability of continuum models to accurately calculate complex strain fields in nanoscale systems.

Correlation of microphotoluminescence spectroscopy, scanning transmission electron microscopy, and atom probe tomography on a single nano-object containing an InGaN/GaN multiquantum well system

A single nanoscale object containing a set of InGaN/GaN nonpolar multiple-quantum wells has been analyzed by microphotoluminescence spectroscopy (μPL), high-resolution scanning transmission electron microscopy (HR-STEM) and atom probe tomography (APT). The correlated measurements constitute a rich and coherent set of data supporting the interpretation that the observed μPL narrow emission lines, polarized perpendicularly to the crystal c-axis and with energies in the interval 2.9-3.3 eV, are related to exciton states localized in potential minima induced by the irregular 3D In distribution within the quantum well (QW) planes. This novel method opens up interesting perspectives, as it will be possible to apply it on a wide class of quantum confining emitters and nano-objects.

Plastic and elastic strain fields in GaAs/Si core-shell nanowires

Thanks to their unique morphology, nanowires have enabled integration of materials in a way that was not possible before with thin film technology. In turn, this opens new avenues for applications in the areas of energy harvesting, electronics, and optoelectronics. This is particularly true for axial heterostructures, while core-shell systems are limited by the appearance of strain-induced dislocations. Even more challenging is the detection and understanding of these defects. We combine geometrical phase analysis with finite element strain simulations to quantify and determine the origin of the lattice distortion in core-shell nanowire structures. Such combination provides a powerful insight in the origin and characteristics of edge dislocations in such systems and quantifies their impact with the strain field map. We apply the method to heterostructures presenting single and mixed crystalline phase. Mixing crystalline phases along a nanowire turns out to be beneficial for reducing strain in mismatched core-shell structures.

Growth, structural and optical properties of AlGaN nanowires in the whole composition range

We report on the growth of AlxGa1-xN nanowires by plasma-assisted molecular beam epitaxy for x in the 0.3-0.8 range. Based on a combination of macro- and micro-photoluminescence, Raman spectroscopy, x-ray diffraction and scanning electron microscopy experiments, it is shown that the structural and optical properties of AlGaN NWs are governed by the presence of compositional fluctuations associated with strongly localized electronic states. A growth model is proposed, which suggests that, depending on growth temperature and metal adatom density, macroscopic composition fluctuations are mostly of kinetic origin and are directly related to the nucleation of the AlGaN nanowire section on top of the GaN nanowire base which is used as a substrate.

Self-assembled GaN quantum wires on GaN/AlN nanowire templates

We present a novel approach for self-assembled growth of GaN quantum wires (QWRs) exhibiting strong confinement in two spatial dimensions. The GaN QWRs are formed by selective nucleation on {112[combining macron]0} (a-plane) facets formed at the six intersections of {11[combining macron]00} (m-plane) sidewalls of AlN/GaN nanowires used as a template. Based on microscopy observations we have developed a 3D model explaining the growth mechanism of QWRs. We show that the QWR formation is governed by self-limited pseudomorphic growth on the side facets of the nanowires (NWs). Quantum confinement in the QWRs is confirmed by the observation of narrow photoluminescence lines originating from individual QWRs with emission energies up to 4.4 eV. Time-resolved photoluminescence studies reveal a short decay time (~120 ps) of the QWR emission. Capping of the QWRs with AlN allows enhancement of the photoluminescence, which is blue-shifted due to compressive strain. The emission energies from single QWRs are modelled assuming a triangular cross-section resulting from self-limited growth on a-plane facets. Comparison with the experimental results yields an average QWR diameter of about 2.7 nm in agreement with structural characterization. The presented results open a new route towards controlled realization of one-dimensional semiconductor quantum structures with a high potential both for fundamental studies and for applications in electronics and in UV light generation.

Visualizing highly localized luminescence in GaN/AlN heterostructures in nanowires

The optical properties of a stack of GaN/AlN quantum discs (QDiscs) in a GaN nanowire have been studied by spatially resolved cathodoluminescence (CL) at the nanoscale (nanoCL) using a scanning transmission electron microscope (STEM) operating in spectrum imaging mode. For the electron beam excitation in the QDisc region, the luminescence signal is highly localized, with spatial extent as low as 5 nm, due to the high band gap difference between GaN and AlN. This allows the discrimination between the emission of neighbouring QDiscs and evidencing the presence of lateral inclusions, about 3 nm thick and 20 nm long rods (quantum rods, QRods), grown unintentionally on the nanowire sidewalls. These structures, also observed by STEM dark-field imaging, are proved to be optically active in nanoCL, emitting at similar, but usually shorter, wavelengths with respect to most QDiscs.

Strain state of GaN nanodisks in AlN nanowires studied by medium energy ion spectroscopy

Medium energy ion spectroscopy experiments have been performed on an ensemble of nanowires deposited by molecular beam epitaxy on Si(111), taking advantage of their reduced in-plane mosaicity. In particular, the strain in nanometric GaN insertions embedded in AlN sections deposited on top of GaN nanowires has been determined. The measured strain is consistent with atomistic valence force field calculations. This opens the way for the structural study of a new range of discontinuous nanowire-based nanostructures by medium energy ion spectroscopy and to the determination of the strain profile of nanodisks in nanowires at the monolayer scale.

Photoluminescence polarization in strained GaN/AlGaN core/shell nanowires

The optical polarization properties of GaN/AlGaN core/shell nanowire (NW) heterostructures have been investigated using polarization resolved micro-photoluminescence (μ-PL) and interpreted in terms of a strain-dependent 6 × 6 k·p theoretical model. The NW heterostructures were fabricated in two steps: the Si-doped n-type c-axis GaN NW cores were grown by molecular beam epitaxy (MBE) and then epitaxially overgrown using halide vapor phase epitaxy (HVPE) to form Mg-doped AlGaN shells. The emission of the uncoated strain-free GaN NW core is found to be polarized perpendicular to the c-axis, while the GaN core compressively strained by the AlGaN shell exhibits a polarization parallel to the NW c-axis. The luminescence of the AlGaN shell is weakly polarized perpendicular to the c-axis due to the tensile axial strain in the shell.

Nanoscale effects on heterojunction electron gases in GaN/AlGaN core/shell nanowires

The electronic properties of heterojunction electron gases formed in GaN/AlGaN core/shell nanowires with hexagonal and triangular cross sections are studied theoretically. We show that at nanoscale dimensions, the nonpolar hexagonal system exhibits degenerate quasi-one-dimensional electron gases at the hexagon corners, which transition to a core-centered electron gas at lower doping. In contrast, polar triangular core/shell nanowires show either a nondegenerate electron gas on the polar face or a single quasi-one-dimensional electron gas at the corner opposite the polar face, depending on the termination of the polar face. More generally, our results indicate that electron gases in closed nanoscale systems are qualitatively different from their bulk counterparts.

Morphology of self-catalyzed GaN nanowires and chronology of their formation by molecular beam epitaxy

GaN nanowires are synthesized by plasma-assisted molecular beam epitaxy on Si(111) substrates. The strong impact of the cell orientation relative to the substrate on the nanowire morphology is shown. To study the kinetics of growth, thin AlN markers are introduced periodically during NW growth. These markers are observed in single nanowires by transmission electron microscopy, giving access to the chronology of the nanowire formation and to the time evolution of the nanowire morphology. A long delay precedes the beginning of nanowire formation. Then, their elongation proceeds at a constant rate. Later, shells develop on the side-wall facets by ascending growth of layer bunches which first agglomerate at the nanowire foot.

Structural and optical properties of InGaN/GaN nanowire heterostructures grown by PA-MBE

The structural and optical properties of InGaN/GaN nanowire heterostructures grown by plasma-assisted molecular beam epitaxy have been studied using a combination of transmission electron microscopy, electron tomography and photoluminescence spectroscopy. It is found that, depending on In content, the strain relaxation of InGaN may be elastic or plastic. Elastic relaxation results in a pronounced radial In content gradient. Plastic relaxation is associated with the formation of misfit dislocations at the InGaN/GaN interface or with cracks in the InGaN nanowire section. In all cases, a GaN shell was formed around the InGaN core, which is assigned to differences in In and Ga diffusion mean free paths.