In situ observation of size-scale effects on the mechanical properties of ZnO nanowires

Atomic force microscopy in mechanical measurements of single nanowires

In this paper, we present the results of mechanical measurement of single nanowires (NWs) in a repeatable manner. Substrates with specifically designed mechanical features were used for NW placement and localization for measurements of properties such as Young's modulus or tensile strength of NW with an atomic force microscopy (AFM) system. Dense arrays of zinc oxide (ZnO) nanowires were obtained by one-step anodic oxidation of metallic Zn foil in a sodium bicarbonate electrolyte and thermal post-treatment. ZnO NWs with a hexagonal wurtzite structure were fixed to the substrates using focused electron beam-induced deposition (FEBID) and were annealed at different temperatures in situ. We show a 10-fold change in the properties of annealed materials as well as a difference in the properties of the NW materials from their bulk values with pre-annealed Young modulus at the level of 20 GPa and annealed reaching 200 GPa. We found the newly developed method to be much more versatile, allowing for in situ operations of NWs, including measurements with different methods of scanning probe microscopy.

Atomistic modeling of electromechanical properties of piezoelectric zinc oxide nanowires

Currently, numerous articles are devoted to examining the influence of geometry and charge distribution on the mechanical properties and structural stability of piezoelectric nanowires (NWs). The varied modeling techniques adopted in earlier molecular dynamics (MD) works dictated the outcome of the different efforts. In this article, comprehensive MD studies are conducted to determine the influence of varied interatomic potentials (partially charged rigid ion model, [PCRIM] ReaxFF, charged optimized many-body [COMB], and Buckingham), geometrical parameters (cross-section geometry, wire diameter, and length), and charge distribution (uniform full charges versus partially charged surface atoms) on the resulting mechanical properties and structural stability of zinc oxide (ZnO) NWs. Our optimized parameters for the Buckingham interatomic potential are in good agreement with the existing experimental results. Furthermore, we found that the incorrect selection of interatomic potentials could lead to excessive overestimate (61%) of the elastic modulus of the NW. While NW length was found to dictate the strain distribution along the wire, impacting its predicted properties, the cross-section shape did not play a major role. Assigning uniform charges for both the core and surface atoms of ZnO NWs leads to a drastic decrease in fracture properties.

A Modified Embedded-Atom Method Potential for a Quaternary Fe-Cr-Si-Mo Solid Solution Alloy

Ferritic-martensitic steels, such as T91, are candidate materials for high-temperature applications, including superheaters, heat exchangers, and advanced nuclear reactors. Considering these alloys' wide applications, an atomistic understanding of the underlying mechanisms responsible for their excellent mechano-chemical properties is crucial. Here, we developed a modified embedded-atom method (MEAM) potential for the Fe-Cr-Si-Mo quaternary alloy system-i.e., four major elements of T91-using a multi-objective optimization approach to fit thermomechanical properties reported using density functional theory (DFT) calculations and experimental measurements. Elastic constants calculated using the proposed potential for binary interactions agreed well with ab initio calculations. Furthermore, the computed thermal expansion and self-diffusion coefficients employing this potential are in good agreement with other studies. This potential will offer insightful atomistic knowledge to design alloys for use in harsh environments.

The size effect in adhesive contact on a gradient nanostructured coating

The adhesive contact problem between a rigid cylindrical punch and a gradient nanostructured (GNS) coating is investigated by considering the size effect. The laminated plate model is applied to characterize the material properties of a GNS coating in plane strain couple stress elasticity. By using the Fourier integral transform and transfer matrix method, the governing integral equation(s) for the two-dimensional adhesive contact problem are obtained. Numerically calculated results are presented to analyse the effect of characteristic material length, the adhesion parameter and nonhomogeneous parameters on the mechanical response of the GNS coating for the adhesive contact problem. We explore the nanoscale contact of a GNS coating with shear modulus varying as a function of depth according to an exponential function or the power-law function. The present results provide a way to improve the contact deformation and damage to nanoelectromechanical systems by adjusting the gradient index of the GNS coating.

Synthesis of Monodispersedly Sized ZnO Nanowires from Randomly Sized Seeds

We demonstrate the facile, rational synthesis of monodispersedly sized zinc oxide (ZnO) nanowires from randomly sized seeds by hydrothermal growth. Uniformly shaped nanowire tips constructed in ammonia-dominated alkaline conditions serve as a foundation for the subsequent formation of the monodisperse nanowires. By precisely controlling the sharp tip formation and the nucleation, our method substantially narrows the distribution of ZnO nanowire diameters from σ = 13.5 nm down to σ = 1.3 nm and controls their diameter by a completely bottom-up method, even initiating from randomly sized seeds. The proposed concept of sharp tip based monodisperse nanowires growth can be applied to the growth of diverse metal oxide nanowires and thus paves the way for bottom-up grown metal oxide nanowires-integrated nanodevices with a reliable performance.

Rapid Fabrication, Microstructure, and in Vitro and in Vivo Investigations of a High-Performance Multilayer Coating with External, Flexible, and Silicon-Doped Hydroxyapatite Nanorods on Titanium

A high-performance multilayer coating with external, flexible, and silicon-doped hydroxyapatite (Si-HA) nanorods was designed using bionics. Plasma electrolytic oxidation (PEO) and the microwave hydrothermal (MH) method were used to rapidly deposit this multilayer coating on a titanium (Ti) substrate, applied for 5 and 10 min, respectively. The bioactive multilayer coating was composed of four layers, and the outermost layer was an external growth layer that consisted of many Si-HA nanorods with a single-crystal structure. The Si-HA nanorods exhibited good flexibility, likely because of their complete single-crystal structures, smooth surfaces, and suitable diameters and lengths. This multilayer coating with a high surface energy was superhydrophilic and exhibited good in vitro bioactivities, such as good apatite formation ability, good cell spreading, and high osteogenic gene expression levels. After implantation in the tibia of rabbits for 16 weeks, almost no soft tissues were formed at the MH treated PEO implant-bone interface. A direct bone contact interface was formed by a bridging effect of the flexible Si-HA nanorods, which further produced a high implant-bone interface bonding strength. The current results demonstrated that the bioactive multilayer layers with the flexible Si-HA nanorods displayed a very good osseointegration ability, showing promising applications in the biomedical field.

Atypical Defect Motions in Brittle Layered Sodium Titanate Nanowires

In situ tensile tests show atypical defect motions in the brittle Na₂Ti₃O₇ (NTO) nanowire (NW) within the elastic deformation range. After brittle fracture, elastic recovery of the NTO NW is followed by reversible motion of the defects in a time-dependent manner. An in situ cyclic loading-unloading test shows that these mobile defects shift back and forth along the NW in accordance with the loading-unloading cycles and eventually restore their initial positions after the load is completely removed. The existence of the defects within the NTO NWs and their motions does not lead to plastic deformation of the NW. The atypical defect motion is speculated to be the result of the glidibility of the TiO₆ layers, where weakly bonded cation layers are in between. Exploration of the above novel observation can establish new understandings of the deformation behavior of superlattice nanostructures.

The Influence of Shape on the Output Potential of ZnO Nanostructures: Sensitivity to Parallel versus Perpendicular Forces

With the consistent shrinking of devices, micro-systems are, nowadays, widely used in areas such as biomedics, electronics, automobiles, and measurement devices. As devices shrunk, so too did their energy consumptions, opening the way for the use of nanogenerators (NGs) as power sources. In particular, to harvest energy from an object's motion (mechanical vibrations, torsional forces, or pressure), present NGs are mainly composed of piezoelectric materials in which, upon an applied compressive or strain force, an electrical field is produced that can be used to power a device. The focus of this work is to simulate the piezoelectric effect in different ZnO nanostructures to optimize the output potential generated by a nanodevice. In these simulations, cylindrical nanowires, nanomushrooms, and nanotrees were created, and the influence of the nanostructures' shape on the output potential was studied as a function of applied parallel and perpendicular forces. The obtained results demonstrated that the output potential is linearly proportional to the applied force and that perpendicular forces are more efficient in all structures. However, nanotrees were found to have an increased sensitivity to parallel applied forces, which resulted in a large enhancement of the output efficiency. These results could then open a new path to increase the efficiency of piezoelectric nanogenerators.

Size-dependent Young's modulus in ZnO nanowires with strong surface atomic bonds

The mechanical properties of size-dependent nanowires are important in nano-electro-mechanical systems (NEMSs), and have attracted much research interest. Characterization of the size effect of nanowires in atmosphere directly to broaden their practical application instead of just in high vacuum situations, as reported previously, is desperately needed. In this study, we systematically studied the Young's modulus of vertical ZnO nanowires in atmosphere. The diameters ranged from 48 nm to 239 nm with a resonance method using non-contact atomic force microscopy. The values of Young's modulus in atmosphere present extremely strong increasing tendency with decreasing diameter of nanowire due to stronger surface atomic bonds compared with that in vacuum. A core-shell model for nanowires is proposed to explore the Young's modulus enhancement in atmosphere, which is correlated with atoms of oxygen occurring near the nanowire surface. The modified model is more accurate for analyzing the mechanical behavior of nanowires in atmosphere compared with the model in vacuum. Furthermore, it is possible to use this characterization method to measure the size-related elastic properties of similar wire-sharp nanomaterials in atmosphere and estimate the corresponding mechanical behavior. The study of the size-dependent Young's modulus in ZnO nanowires in atmosphere will improve the understanding of the mechanical properties of nanomaterials as well as providing guidance for applications in NEMSs, nanogenerators, biosensors and other related areas.

Mechanical characterization of diesel soot nanoparticles: in situ compression in a transmission electron microscope and simulations

Incomplete fuel burning inside an internal combustion engine results in the creation of soot in the form of nanoparticles. Some of these soot nanoparticles (SNP) become adsorbed into the lubricating oil film present on the cylinder walls, which adversely affects the tribological performance of the lubricant. In order to better understand the mechanisms underlying the wear caused by SNPs, it is important to understand the behavior of SNPs and to characterize potential changes in their mechanical properties (e.g. hardness) caused by (or during) mechanical stress. In this study, the behavior of individual SNPs originating from diesel engines was studied under compression. The experiments were performed in a transmission electron microscope using a nanoindentation device. The nanoparticles exhibited elasto-plastic behavior in response to consecutive compression cycles. From the experimental data, the Young's modulus and hardness of the SNPs were calculated. The Young's modulus and hardness of the nanoparticles increased with the number of compression cycles. Using an electron energy loss spectroscopy technique, it was shown that the sp²/sp³ ratio within the compressed nanoparticle decreases, which is suggested to be the cause of the increase in elasticity and hardness. In order to corroborate the experimental findings, molecular dynamics simulations of a model SNP were performed. The SNP model was constructed using carbon and hydrogen atoms with morphology and composition comparable to those observed in the experiment. The model SNP was subjected to repeated compressions between two virtual rigid walls. During the simulation, the nanoparticle exhibited elasto-plastic behavior like that in the experiments. The results of the simulations confirm that the increase in the elastic modulus and hardness is associated with a decrease in the sp²/sp³ ratio.

Effects of surface defects on the mechanical properties of ZnO nanowires

The elastic modulus of ZnO nanowires was measured using a resonance method based on laser Doppler effect and their fracture strains were determined via two-point bending with the aid of optical nanomanipulation. The elastic moduli of ZnO nanowires with diameters of 78 to 310 nm vary from 123 to 154 GPa, which are close to the bulk value of 140 GPa and independent of the diameters and surface defects. However, the fracture strains of the ZnO nanowires depend significantly on their diameters, increasing from 2.1% to 6.0% with the decrease in diameter from 316 to 114 nm. Post-mortem TEM analysis of the ends of the fractured nanowires revealed that fracture initiated at surface defects. The Weibull statistical analysis demonstrated that a greater defect depth led to a smaller fracture strain. The surface-defect dominated fracture should be an important consideration for the design and application of nanowire-based nanoelectromechanical systems.

Ultralarge Bending Strain and Fracture-Resistance Investigation of Tungsten Carbide Nanowires

Hard tungsten carbide (WC) with brittle behavior is frequently applied for mechanical purposes. Here, ultralarge elastic bending deformation is reported in defect-rare WC [0001] nanowires; the tested bending strain reaches a maximum of 20% ± 3.33%, which challenges the traditional understanding of this material. The lattice analysis indicates that the dislocations are confined to the inner part of the WC nanowires. First, the high Peierls-Nabarro barrier hinders the movement of the locally formed dislocations, which causes rapid dislocation aggregation and hinders long-range glide, resulting in a dense distribution of the dislocation network. In this case, the loading is dispersed along multiple points, which is then balanced by the complex internal mechanical field. In the compressive part, the possible dislocations predominantly emerge in the (0001) plane and mainly slip along the axial direction. The disordered shell first forms at the tensile side and prevents the generation of nanocracks at the surface. The novel lattice kinetics make WC nanowires capable of substantial bending strain resistance. Analytical results of the force-displacement (F-d) curves based on the double-clamped beam model exhibit an obvious nonlinear elastic characteristic, which originates fundamentally from the lattice anharmonicity under moderate stress.

Adhesion contact deformation in nanobridge tests

An accurate grasp of the mechanical properties, especially Young's moduli, of one dimensional nanomaterials plays a crucial role in the design and safe service of flexible electronic devices and implanted biomedical sensors. Nanobridge tests are widely used in the characterization of the mechanical properties of nanowires. In these tests, an atomic force microscope (AFM), functioning as a test machine, exerts a force to bend a nanowire suspended across a trench or a hole with the two ends fixed on a template or substrate. Adhesion contact deformation occurs inevitably during nanobridge testing between the AFM tip and the tested sample, thereby underestimating the Young's modulus of the tested nanowire and causing a pseudo-size effect in the determined Young's modulus. The present work systematically investigates the adhesion contact deformation in nanobridge tests and provides an analytical approach to evaluate the contact deformation and to determine the Young's modulus. To illustrate the developed methodology, AFM nanobridge tests were conducted on gold nanowires (180-340 nm wide, 3.6-5.1 μm long and 90 nm thick). The results indicate that when the contact deformation was taken into consideration, the average Young's modulus increased by 4.63%. Guidelines for minimizing the impact of contact deformation in practical experiments are presented. Furthermore, the results provide insight into the probable causes of the variation in experimentally obtained size-dependencies of Young's moduli of nanowires.

The Mechanical Properties of Nanowires

Applications of nanowires into future generation nanodevices require a complete understanding of the mechanical properties of the nanowires. A great research effort has been made in the past two decades to understand the deformation physics and mechanical behaviors of nanowires, and to interpret the discrepancies between experimental measurements and theoretical predictions. This review focused on the characterization and understanding of the mechanical properties of nanowires, including elasticity, plasticity, anelasticity and strength. As the results from the previous literature in this area appear inconsistent, a critical evaluation of the characterization techniques and methodologies were presented. In particular, the size effects of nanowires on the mechanical properties and their deformation mechanisms were discussed.

Defect Engineering: A Path toward Exceeding Perfection

Moving to nanoscale is a path to get perfect materials with superior properties. Yet defects, such as stacking faults (SFs), are still forming during the synthesis of nanomaterials and, according to common notion, degrade the properties. Here, we demonstrate the possibility of engineering defects to, surprisingly, achieve mechanical properties beyond those of the corresponding perfect structures. We show that introducing SFs with high density increases the Young's Modulus and the critical stress under compressive loading of the nanowires above those of a perfect structure. The physics can be explained by the increase in intrinsic strain due to the presence of SFs and overlapping of the corresponding strain fields. We have used the molecular dynamics technique and considered ZnO as our model material due to its technological importance for a wide range of electromechanical applications. The results are consistent with recent experiments and propose a novel approach for the fabrication of stronger materials.

Modified Continuum Mechanics Modeling on Size-Dependent Properties of Piezoelectric Nanomaterials: A Review

Piezoelectric nanomaterials (PNs) are attractive for applications including sensing, actuating, energy harvesting, among others in nano-electro-mechanical-systems (NEMS) because of their excellent electromechanical coupling, mechanical and physical properties. However, the properties of PNs do not coincide with their bulk counterparts and depend on the particular size. A large amount of efforts have been devoted to studying the size-dependent properties of PNs by using experimental characterization, atomistic simulation and continuum mechanics modeling with the consideration of the scale features of the nanomaterials. This paper reviews the recent progresses and achievements in the research on the continuum mechanics modeling of the size-dependent mechanical and physical properties of PNs. We start from the fundamentals of the modified continuum mechanics models for PNs, including the theories of surface piezoelectricity, flexoelectricity and non-local piezoelectricity, with the introduction of the modified piezoelectric beam and plate models particularly for nanostructured piezoelectric materials with certain configurations. Then, we give a review on the investigation of the size-dependent properties of PNs by using the modified continuum mechanics models, such as the electromechanical coupling, bending, vibration, buckling, wave propagation and dynamic characteristics. Finally, analytical modeling and analysis of nanoscale actuators and energy harvesters based on piezoelectric nanostructures are presented.

Atomic Defects Influenced Mechanics of II-VI Nanocrystals

Mechanical properties of nanocrystals are influenced by atomic defects. Here, we demonstrate the effect of planar defects on the mechanics of ZnO nanorods using atomic force microscopy, high-resolution transmission electron microscopy, and large-scale atomistic simulation. We study two different conditionally grown single nanorods. One contains extended I₁-type stacking fault (SF) and another is defect free. The SF containing nanorods show buckling behaviors with reduced critical loading, whereas the other kinds show linear elastic behavior. We also studied the size dependence of elastic modulus and yield strength. The elastic modulus in both nanorods is inversely proportional to their size. Similar trend is observed for yield strength in the SF containing nanorods; however, the opposite is observed in the SF-free nanorods. This first experimental and theoretical study will guide toward the development of reliable electromechanical devices.

Cold-bonding in sub-10 nm indium tin oxide nanorods

Cold-bonding in a typical metal oxide material nanostructure, indium tin oxide nanorods (ITONs), was observed and studied by combining precise in situ nano-manipulation, transmission electron microscopy (TEM) observation and on-line electrical properties measurements. Our studies revealed an oriented attachment process caused by enhanced atom mobility or diffusion and rearrangement at the contact, which worked efficiently in reconnecting the ITONs. Electrical measurements exhibited low contact resistance between the re-connectable ITON segments. Our observations indicate that small-sized nanostructures could be cold-bonded easily following a similar mechanism with their electrical properties retained.

Structural transformation in monolayer materials: a 2D to 1D transformation

The excess energy of surface atoms along with the surface stresses can be the source of structural instabilities in low dimensional materials, which here we revealed the 2D to 1D transformation.

The smallest resonator arrays in atmosphere by chip-size-grown nanowires with tunable Q-factor and frequency for subnanometer thickness detection

A chip-size vertically aligned nanowire (NW) resonator arrays (VNRs) device has been fabricated with simple one-step lithography process by using grown self-assembled zinc oxide (ZnO) NW arrays. VNR has cantilever diameter of 50 nm, which breakthroughs smallest resonator record (>100 nm) functioning in atmosphere. A new atomic displacement sensing method by using atomic force microscopy is developed to effectively identify the resonance of NW resonator with diameter 50 nm in atmosphere. Size-effect and half-dimensional properties of the NW resonator have been systematically studied. Additionally, VNR has been demonstrated with the ability of detecting nanofilm thickness with subnanometer (<10(-9)m) resolution.

Influence of piezoelectric effect on dissolving behavior and stability of ZnO micro/nanowires in solution

We demonstrate for the first time the corrosion behavior of ZnO micro/nanowires under stress, investigating the influence of the piezoelectric effect on the corrosion of ZnO micro/nanowires in acidic and alkaline environments.

Dissolving behavior and electrical properties of ZnO wire in HCl solution

In this paper, the preferential etching plane and electrical properties of ZnO wires are investigated after reaction with HCl solution.

Design Concepts, Fabrication and Advanced Characterization Methods of Innovative Piezoelectric Sensors Based on ZnO Nanowires

Micro- and nano-scale materials and systems based on zinc oxide are expected to explode in their applications in the electronics and photonics, including nano-arrays of addressable optoelectronic devices and sensors, due to their outstanding properties, including semiconductivity and the presence of a direct bandgap, piezoelectricity, pyroelectricity and biocompatibility. Most applications are based on the cooperative and average response of a large number of ZnO micro/nanostructures. However, in order to assess the quality of the materials and their performance, it is fundamental to characterize and then accurately model the specific electrical and piezoelectric properties of single ZnO structures. In this paper, we report on focused ion beam machined high aspect ratio nanowires and their mechanical and electrical (by means of conductive atomic force microscopy) characterization. Then, we investigate the suitability of new power-law design concepts to accurately model the relevant electrical and mechanical size-effects, whose existence has been emphasized in recent reviews.

The clash of mechanical and electrical size-effects in ZnO nanowires and a double power law approach to elastic strain engineering of piezoelectric and piezotronic devices

The piezoelectric performance of ultra-strength ZnO nanowires (NWs) depends on the subtle interplay between electrical and mechanical size-effects. "Size-dependent" modeling of compressed NWs illustrates why experimentally observed mechanical stiffening can indeed collide with electrical size-effects when the size shrinks, thereby lowering the actual piezoelectric function from bulk estimates. "Smaller" is not necessarily "better" in nanotechnology.

Electromechanical properties of 1D ZnO nanostructures: nanopiezotronics building blocks, surface and size-scale effects

One-dimensional (1D) zinc oxide nanostructures are the main components of nanogenerators and central to the emerging field of nanopiezotronics. Understanding the underlying physics and quantifying the electromechanical properties of these structures, the topic of this research study, play a major role in designing next-generation nanoelectromechanical devices. Here, atomistic simulations are utilized to study surface and size-scale effects on the electromechanical response of 1D ZnO nanostructures. It is shown that the mechanical and piezoelectric properties of these structures are controlled by their size, cross-sectional geometry, and loading configuration. The study reveals enhancement of the piezoelectric and elastic modulus of ZnO nanowires (NW) with diameter d > 1 nm, followed by a sudden drop for d < 1 nm due to transformation of NWs to nanotubes (NTs). Degradation of mechanical and piezoelectric properties of ZnO nanobelts (NBs) followed by an enhancement in piezoelectric properties occurs when their lower dimension is reduced to <1 nm. The latter enhancement can be explained in the context of surface reconfiguration and formation of hexagon-tetragon (HT) pairs at the intersection of (21[combining macron]1[combining macron]0) and (011[combining macron]0) planes in NBs. Transition from a surface-reconstructed dominant to a surface-relaxed dominant region is demonstrated for lateral dimensions <1 nm. New phase-transformation (PT) kinetics from piezoelectric wurtzite to nonpiezoelectric body-centered tetragonal (WZ → BCT) and graphite-like phase (WZ → HX) structures occurs in ZnO NWs loaded up to large strains of ∼10%.

Lateral bending of tapered piezo-semiconductive nanostructures for ultra-sensitive mechanical force to voltage conversion

Quasi-1D piezoelectric nanostructures may offer unprecedented sensitivity for transducing minuscule input mechanical forces into high output voltages due to both scaling laws and increased piezoelectric coefficients. However, until now both theoretical and experimental studies have suggested that, for a given mechanical force, lateral bending of piezoelectric nanowires results in lower output electric potentials than vertical compression. Here we demonstrate that this result only applies to nanostructures with a constant cross-section. Moreover, though it is commonly believed that the output electric potential of a strained piezo-semiconductive device can only be reduced by the presence of free charges, we show that the output piezopotential of laterally bent tapered nanostructures, with typical doping levels and very small input forces, can be even increased up to two times by free charges.Our analyses confirm that, though not optimal for piezoelectric energy harvesting, lateral bending of tapered nanostructures with typical doping levels can be ideal for transducing tiny input mechanical forces into high and accessible piezopotentials. Our results provide guidelines for designing high-performance piezo-nano-devices for energy harvesting, mechanical sensing, piezotronics, piezo-phototronics, and piezo-controlled chemical reactions, among others.

In situ TEM electromechanical testing of nanowires and nanotubes

The emergence of one-dimensional nanostructures as fundamental constituents of advanced materials and next-generation electronic and electromechanical devices has increased the need for their atomic-scale characterization. Given its spatial and temporal resolution, coupled with analytical capabilities, transmission electron microscopy (TEM) has been the technique of choice in performing atomic structure and defect characterization. A number of approaches have been recently developed to combine these capabilities with in-situ mechanical deformation and electrical characterization in the emerging field of in-situ TEM electromechanical testing. This has enabled researchers to establish unambiguous synthesis-structure-property relations for one-dimensional nanostructures. In this article, the development and latest advances of several in-situ TEM techniques to carry out mechanical and electromechanical testing of nanowires and nanotubes are reviewed. Through discussion of specific examples, it is shown how the merging of several microsystems and TEM has led to significant insights into the behavior of nanowires and nanotubes, underscoring the significant role in-situ techniques play in the development of novel nanoscale systems and materials.

Controlled fabrication of photoactive copper oxide-cobalt oxide nanowire heterostructures for efficient phenol photodegradation

Fabrication of oxide nanowire heterostructures with controlled morphology, interface, and phase purity is critical for high-efficiency and low-cost photocatalysis. Here, we have studied the formation of copper oxide-cobalt nanowire heterostructures by sputtering and subsequent air annealing to result in cobalt oxide (Co(3)O(4))-coated CuO nanowires. This approach allowed fabrication of standing nanowire heterostructures with tunable compositions and morphologies. The vertically standing CuO nanowires were synthesized in a thermal growth method. The shell growth kinetics of Co and Co(3)O(4) on CuO nanowires, morphological evolution of the shell, and nanowire self-shadowing effects were found to be strongly dependent on sputtering duration, air-annealing conditions, and alignment of CuO nanowires. Finite element method (FEM) analysis indicated that alignment and stiffness of CuO-Co nanowire heterostructures greatly influenced the nanomechanical aspects such as von Mises equivalent stress distribution and bending of nanowire heterostructures during the Co deposition process. This fundamental knowledge was critical for the morphological control of Co and Co(3)O(4) on CuO nanowires with desired interfaces and a uniform coating. Band gap energies and phenol photodegradation capability of CuO-Co(3)O(4) nanowire heterostructures were studied as a function of Co(3)O(4) morphology. Multiple absorption edges and band gap tailings were observed for these heterostructures, indicating photoactivity from visible to UV range. A polycrystalline Co(3)O(4) shell on CuO nanowires showed the best photodegradation performance (efficiency ~50-90%) in a low-powered UV or visible light illumination with a sacrificial agent (H(2)O(2)). An anomalously high efficiency (~67.5%) observed under visible light without sacrificial agent for CuO nanowires coated with thin (∼5.6 nm) Co(3)O(4) shell and nanoparticles was especially interesting. Such photoactive heterostructures demonstrate unique sacrificial agent-free, robust, and efficient photocatalysts promising for organic decontamination and environmental remediation.

A review of mechanical and electromechanical properties of piezoelectric nanowires

Piezoelectric nanowires are promising building blocks in nanoelectronic, sensing, actuation and nanogenerator systems. In spite of great progress in synthesis methods, quantitative mechanical and electromechanical characterization of these nanostructures is still limited. In this article, the state-of-the art in experimental and computational studies of mechanical and electromechanical properties of piezoelectric nanowires is reviewed with an emphasis on size effects. The review covers existing characterization and analysis methods and summarizes data reported in the literature. It also provides an assessment of research needs and opportunities. Throughout the discussion, the importance of coupling experimental and computational studies is highlighted. This is crucial for obtaining unambiguous size effects of nanowire properties, which truly reflect the effect of scaling rather than a particular synthesis route. We show that such a combined approach is critical to establish synthesis-structure-property relations that will pave the way for optimal usage of piezoelectric nanowires.

A computational and experimental investigation of the mechanical properties of single ZnTe nanowires

One-dimensional nanostructures such as ZnTe, CdTe, Bi(2)Te(3) and others have attracted much attention in recent years for their potential in thermoelectric devices among other applications. A better understanding of their mechanical properties is important for the design of devices. A combined experimental and computational approach has been used here to investigate the size effects on the Young's modulus of ZnTe nanowires (NWs). The mechanical properties of individual ZnTe nanowires in a wide diameter range (50-230 nm) were experimentally measured inside a high resolution transmission electron microscope using an atomic force microscope probe with the ability to record in situ continuous force-displacement curves. The in situ observations showed that ZnTe NWs are flexible nanostructures with the ability to withstand relatively high buckling forces without becoming fractured. The Young's modulus is found to be independent of nanowire diameter in the investigated range, in contrast to reported results for ZnO NWs and carbon nanotubes where the modulus increases with a decrease in diameter. Molecular dynamics simulations performed for nanowires with diameters less than 20 nm show limited size dependence for diameters smaller than 5 nm. The surface atoms present lower Young's modulus according to the simulations and the limited size dependency of the cylindrical ZnTe NWs is attributed to the short range covalent interactions.