Gas sensing materials roadmap

Au- ZnFe2O4 hollow microspheres based gas sensor for detecting the mustard gas simulant 2-chloroethyl ethyl sulfide

Mustard gas, a representative of blister agents, poses a severe threat to human health. Although the structure of 2-chloroethyl ethyl sulfide (2-CEES) is similar to mustard gas, 2-CEES is non-toxic, rendering it a commonly employed simulant in related research. ZnFe2O4-based semiconductor gas sensors exhibit numerous advantages, including structural stability, high sensitivities, and easy miniaturization. However, they exhibit insufficient sensitivity at low concentrations and require high operating temperatures. Owing to the effect of electronic and chemical sensitization, the gas-sensing performance of a sensor may be remarkably enhanced via the sensitization method of noble metal loading. In this study, based on the morphologies of ZnFe2O4 hollow microspheres, a solvothermal method was adopted to realize different levels of Au loading. Toward 1 ppm of 2-CEES, the gas sensor based on 2 wt.% Au-loaded ZnFe2O4 hollow microspheres exhibited a response sensitivity twice that of the gas sensor based on pure ZnFe2O4; furthermore, the response/recovery times decreased. Additionally, the sensor displayed excellent linear response to low concentrations of 2-CEES, outstanding selectivity in the presence of several common volatile organic compounds, and good repeatability, as well as long-term stability. The Au-loaded ZnFe2O4-based sensor has considerable potential for use in detecting toxic chemical agents and their simulants.

Janus HfSSe monolayer: a promising candidate for SO2and COCl2gas sensing

Janus monolayers based on transition metal dichalcogenides have garnered significant interest as potential materials for nano electronic device applications due to their exceptional physical and electronic properties. In this study, we investigate the stability of the Janus HfSSe monolayer usingab initiomolecular dynamics simulations and analyze the electronic properties in its pristine state. We then examine the impact of adsorbing toxic gas molecules (AsH3, COCl2, NH3, NO2, and SO2) on the monolayer's structure and electronic properties, testing their adsorption on different active sites on top of hafnium, selenium, and sulfur. The sensitivity of the gas molecules is quantified in terms of their adsorption energy, with the highest and lowest energies being observed for SO2(-0.278 eV) and NO2(-0.095 eV), respectively. Additionally, we calculate other properties such as recovery time, adsorption height, Bader charge, and charge difference density to determine the sensitivity and selectivity of the toxic gas molecules. Our findings suggest that the Janus HfSSe monolayer has the potential to function as SO2and COCl2gas sensor due to its high sensitivity for these two gases.

High throughput computations of the effective removal of liquified gases by novel perchlorate hybrid material

The utilization of hybrid materials in separation technology, sorbents, direct air capture (DAC) technology, sensors, adsorbents, and chiral material recognition has increased in the past decade due to the recognized impact of atmospheric pollutants and hazardous industrial gases on climate change. A novel hybrid material, perchlorate hybrid (PClH), has been proposed in this study for the effective sensory detection and trapping of atmospheric pollutants and industrial hazardous gases. The study evaluated the structural properties, adsorption mechanism, electronic sensitivity, and topological analysis of PClH using highly accurate computational methods (M062X-D3BJ/def2-ccpVTZ and DSDPBEP86/def2-ccpVTZ). The computational analysis demonstrated that PClH has considerable adsorption energies and favorable interaction with CO2, NO2, SO2, COCl2, and H2S. PClH is more suitable for detecting liquefiable gases such as COCl2, CO2, and SO2, and can be easily recovered under ambient conditions. Developing such materials can contribute to reducing hazardous gases and pollutants in the atmosphere, leading to a cleaner and safer environment.

Characterization of the Response of Magnetron Sputtered In2O3-x Sensors to NO2

The response of resistive In₂O_3-x sensing devices was investigated as a function of the NO₂ concentration in different operative conditions. Sensing layers are 150 nm thick films manufactured by oxygen-free room temperature magnetron sputtering deposition. This technique allows for a facile and fast manufacturing process, at same time providing advantages in terms of gas sensing performances. The oxygen deficiency during growth provides high densities of oxygen vacancies, both on the surface, where they are favoring NO₂ absorption reactions, and in the bulk, where they act as donors. This n-type doping allows for conveniently lowering the thin film resistivity, thus avoiding the sophisticated electronic readout required in the case of very high resistance sensing layers. The semiconductor layer was characterized in terms of morphology, composition and electronic properties. The sensor baseline resistance is in the order of kilohms and exhibits remarkable performances with respect to gas sensitivity. The sensor response to NO₂ was studied experimentally both in oxygen-rich and oxygen-free atmospheres for different NO₂ concentrations and working temperatures. Experimental tests revealed a response of 32%/ppm at 10 ppm NO₂ and response times of approximately 2 min at an optimal working temperature of 200 °C. The obtained performance is in line with the requirements of a realistic application scenario, such as in plant condition monitoring.

Metal-organic frameworks-derived In2O3/ZnO porous hollow nanocages for highly sensitive H2S gas sensor

The detection of hydrogen sulfide (H₂S) is critical because of its potential harm and widespread presence in the oil and gas sectors. The zeolitic imidazolate framework-8 (ZIF-8) derived ZnO nanostructures manufactured as gas sensors have exceptional sensitivity and selectivity for H₂S gas. In/Zn-ZIF-8 template material was synthesized by a simple one-step co-precipitation method followed by thermal annealing in air. The heat treatment resulted in In₂O₃/ZnO nanostructures with mixed heterostructures. The crystal structure (XRD), morphology (SEM/TEM), chemical state (XPS), surface area (BET), etc were investigated to ascertain the nature of the as-prepared material. SEM imagery revealed that the as-prepared In₂O₃/ZnO sensitive material had a microstructure of porous hollow nanocages with an average particle size of about 200 nm, which is beneficial to the diffusion and adsorption of gas molecules. The gas sensing performance test results of the In₂O₃/ZnO hollow nanocages show that their response to H₂S gas is significantly improved 67.5 @50 ppm H₂S (about 11 times that of pure ZnO nanocages) at an optimal temperature of 200 °C, better selectivity, lower theoretical detection limit and good linearity between gas concentration and response values. The enhanced gas sensing feat to H₂S gas is mainly attributed to the formation of n-n heterojunction and the wide surface area of the newly formed In₂O₃/ZnO porous hollow nanocages.

Metal Oxide Gas Sensors to Study Acetone Detection Considering Their Potential in the Diagnosis of Diabetes: A Review

Metal oxide (MOx) gas sensors have attracted considerable attention from both scientific and practical standpoints. Due to their promising characteristics for detecting toxic gases and volatile organic compounds (VOCs) compared with conventional techniques, these devices are expected to play a key role in home and public security, environmental monitoring, chemical quality control, and medicine in the near future. VOCs (e.g., acetone) are blood-borne and found in exhaled human breath as a result of certain diseases or metabolic disorders. Their measurement is considered a promising tool for noninvasive medical diagnosis, for example in diabetic patients. The conventional method for the detection of acetone vapors as a potential biomarker is based on spectrometry. However, the development of MOx-type sensors has made them increasingly attractive from a medical point of view. The objectives of this review are to assess the state of the art of the main MOx-type sensors in the detection of acetone vapors to propose future perspectives and directions that should be carried out to implement this type of sensor in the field of medicine.

Enhancing the Performance of the Photonic Integrated Sensing System by Applying Frequency Interrogation

Lab-on-a-chip systems are currently one of the most promising areas in the development of ultra-compact sensor systems, used primarily for gas and liquid analysis to determine the concentration of impurities. Integrated photonics is an ideal basis for designing "lab-on-a-chip" systems, advantageous for its compactness, energy efficiency, and low cost in mass production. This paper presents a solution for "lab-on-a-chip" device realization, consisting of a sensor and an interrogator based on a silicon-on-insulator (SOI) integrated photonics platform. The sensor function is performed by an all-pass microring resonator (MRR), installed as a notch filter in the feedback circuit of an optoelectronic oscillator based on an electro-optic phase modulator. This structure realizes the frequency interrogation of the sensor with high accuracy and speed using a conventional single-mode laser source. The system sensitivity for the considered gases is 13,000 GHz/RIU. The results show that the use of frequency interrogation makes it possible to increase the intrinsic LoD by five orders. The proposed solution opens an opportunity for fully integrated implementation of a photonic "laboratory-on-a-chip" unit.

Gas Sensors Based on Single-Wall Carbon Nanotubes

Single-wall carbon nanotubes (SWCNTs) have a high aspect ratio, large surface area, good stability and unique metallic or semiconducting electrical conductivity, they are therefore considered a promising candidate for the fabrication of flexible gas sensors that are expected to be used in the Internet of Things and various portable and wearable electronics. In this review, we first introduce the sensing mechanism of SWCNTs and the typical structure and key parameters of SWCNT-based gas sensors. We then summarize research progress on the design, fabrication, and performance of SWCNT-based gas sensors. Finally, the principles and possible approaches to further improving the performance of SWCNT-based gas sensors are discussed.

P-type Inversion at the Surface of β-Ga2O3 Epitaxial Layer Modified with Au Nanoparticles

The electric properties and chemical and thermal stability of gallium oxide β-Ga₂O₃ make it a promising material for a wide variety of electronic devices, including chemiresistive gas sensors. However, p-type doping of β-Ga₂O₃ still remains a challenge. A β-Ga₂O₃ epitaxial layer with a highly developed surface was synthesized on gold electrodes on a Al₂O₃ substrate via a Halide Vapor Phase Epitaxy (HVPE) method. The epitaxial layer was impregnated with an aqueous colloidal solution of gold nanoparticles with an average diameter of Au nanoparticle less than 5 nm. Electrical impedance of the layer was measured before and after modification with the Au nanoparticles in an ambient atmosphere, in dry nitrogen, and in air containing dimethyl sulfide C₂H₆S (DMS). After the impregnation of the β-Ga₂O₃ epitaxial layer with Au nanoparticles, its conductance increased, and its electric response to air containing DMS had been inversed. The introduction of Au nanoparticles at the surface of the metal oxide was responsible for the formation of an internal depleted region and p-type conductivity at the surface.

Nanomaterials for IoT Sensing Platforms and Point-of-Care Applications in South Korea

Herein, state-of-the-art research advances in South Korea regarding the development of chemical sensing materials and fully integrated Internet of Things (IoT) sensing platforms were comprehensively reviewed for verifying the applicability of such sensing systems in point-of-care testing (POCT). Various organic/inorganic nanomaterials were synthesized and characterized to understand their fundamental chemical sensing mechanisms upon exposure to target analytes. Moreover, the applicability of nanomaterials integrated with IoT-based signal transducers for the real-time and on-site analysis of chemical species was verified. In this review, we focused on the development of noble nanostructures and signal transduction techniques for use in IoT sensing platforms, and based on their applications, such systems were classified into gas sensors, ion sensors, and biosensors. A future perspective for the development of chemical sensors was discussed for application to next-generation POCT systems that facilitate rapid and multiplexed screening of various analytes.

Metal-organic Framework Materials Coupled to Optical Fibers for Chemical Sensing: A Review

Metal-organic frameworks (MOFs), a newer class of crystalline nanoporous materials, have been in the limelight owing to their exceptional tunability for structures and physicochemical properties, and have found successful applications in gas storage, gas separation, and catalysis. The mesmerizing properties of MOFs, especially the extensive and tunable porosity and chemical selectivity, also make them an excellent candidate class as chemo-sensory materials. Moreover, MOF-based sensors have attracted considerable attention in the past decade. Recent literature reviews focused on the progress of MOF-based electronic sensors and luminescent MOF sensors, while sensors exploiting the dielectric properties (refractive index) of MOFs were also demonstrated and discussed very recently. The motivation of this report is to provide, for the first time, a general review on such MOF sensors with a particular focus on miniature optical fiber (OF) based MOF sensors and to demonstrate the promising potential of MOFs as dielectric coatings on OF for highly sensitive chemical sensing. The fundamental principle of OF-MOF sensors relies on the tunability of the refractive index of a MOF, which is dependent on the amount and type of adsorbed guest molecules in the MOF pores. MOF sensors based on different optical sensing principles are reviewed; challenges and perspectives on further research into the field of OF-MOF sensors are also discussed.