Crosslinked starch nanofibers with high mechanical strength and excellent water resistance for biomedical applications

Advances and applications of crosslinked electrospun biomacromolecular nanofibers

Electrospinning is a technology for fabricating ultrafine fibers from natural or synthetic polymers that have novel or enhanced functional properties. These fibers have found applications in a diverse range of fields, including the food, medicine, cosmetics, agriculture, and chemical industries. However, the tendency for electrospun nanofibers to dissociate when exposed to certain environmental conditions limits many of their practical applications. The structural integrity and functional attributes of these nanofibers can be improved using physical and/or chemical crosslinking methods. This review article discusses the formation of polymeric nanofibers using electrospinning and then describes how different crosslinking methods can be used to enhance their mechanical, thermal, and biological attributes. Methods for optimizing the crosslinking reactions are discussed, including proper selection of crosslinker type and reaction conditions. Then, food, medical, and separation applications of crosslinked electrospun fibers are assessed, including in bone and skin tissue engineering, wound healing, drug delivery, air filtration, water filtration, oil removal, food packaging, food preservation, and bioactive delivery. Finally, areas where future research are needed are highlighted, as well as possible future applications of crosslinked nanofibers.

Transmucosal Delivery of Peptides and Proteins Through Nanofibers: Current Status and Emerging Developments

Advancements in recombinant DNA technology have made proteins and peptides available for diagnostic and therapeutic applications, but their effectiveness when taken orally leads to poor patient compliance, requiring clinical administration. Among the alternative routes, transmucosal delivery has the advantage of being noninvasive and bypassing hepato-gastrointestinal clearance. Various mucosal routes-buccal, nasal, pulmonary, rectal, and vaginal-have been explored for delivering these macromolecules. Nanofibers, due to their unique properties like high surface-area-to-volume ratio, mechanical strength, and improved encapsulation efficiency, serve as promising carriers for proteins and peptides. These nanofibers can be tailored for quick dissolution, controlled release, enhanced encapsulation, targeted delivery, and improved bioavailability, offering superior pharmaceutical and pharmacokinetic performance compared to conventional methods. This leads to reduced dosages, fewer side effects, and enhanced patient compliance. Hence, nanofibers hold tremendous potential for protein/peptide delivery, especially through mucosal routes. This review focuses on the therapeutic application of proteins and peptides, challenges faced in their conventional delivery, techniques for fabricating different types of nanofibers and, various nanofiber-based dosage forms, and factors influencing nanofiber generation. Insights pertaining to the precise selection of materials used for fabricating nanofibers and regulatory aspects have been covered. Case studies wherein the use of specific protein/peptide-loaded nanofibers and delivered via oral/vaginal/nasal mucosa for diagnostic/therapeutic use and related preclinical and clinical studies conducted have been included in this review.

Robust design of starch composite nanofibrous films for active food packaging: Towards improved mechanical, antioxidant, and antibacterial properties

Developing efficient and biodegradable packaging films is of paramount significance owing to the scarcity of petroleum based resources. However, their applications in food packaging are limited due to their poor mechanical properties and inadequate biological activities. This study proposes a novel approach to develop the starch composite nanofibrous films (SNFs/TA/Fe3+) consisting of starch, tannic acid, and Fe3+ using the temperature-assisted electrospinning method. The addition of TA resulted in a decrease in the rate of thermal degradation, indicating an improvement in the thermal stability of SNFs. However, the incorporation of TA or TA/Fe3+ showed only a slight impact on the internal structure of SNFs. SNFs/TA/Fe3+ loaded with 0.1 wt% of Fe3+ demonstrated a significantly higher tensile strength compared to SNFs and those loaded with TA alone. The presence of TA enhances the antioxidant activity of SNFs, and the robust SNFs/TA/Fe3+ exhibited comparable antioxidant activity to SNFs/TA. However, the SNFs/TA/Fe3+ showed a reduction in antibacterial activity, possibly due to the high valence state of the metal ions. Overall, these findings highlighted that a simple electrospinning method was used to produce SNFs/TA/Fe3+ resulted in improved mechanical properties and antioxidant activity, offering a new strategy for the development of active food packaging using SNFs.

Progress in Starch-Based Materials for Food Packaging Applications

The food packaging sector generates large volumes of plastic waste due to the high demand for packaged products with a short shelf-life. Biopolymers such as starch-based materials are a promising alternative to non-renewable resins, offering a sustainable and environmentally friendly food packaging alternative for single-use products. This article provides a chronology of the development of starch-based materials for food packaging. Particular emphasis is placed on the challenges faced in processing these materials using conventional processing techniques for thermoplastics and other emerging techniques such as electrospinning and 3D printing. The improvement of the performance of starch-based materials by blending with other biopolymers, use of micro- and nano-sized reinforcements, and chemical modification of starch is discussed. Finally, an overview of recent developments of these materials in smart food packaging is given.

Tunable Biomaterials for Myocardial Tissue Regeneration: Promising New Strategies for Advanced Biointerface Control and Improved Therapeutic Outcomes

Following myocardial infarction (MI) and the natural healing process, the cardiac mechanostructure changes significantly leading to reduced contractile ability and putting additional pressure on the heart muscle thereby increasing the...

Effects of preparation parameters on the properties of the crosslinked pectin nanofiber mats

Pectin nanofiber mats prepared with periodate oxidation-electrospinning-adipic acid dihydrazide crosslinking strategy are promising for biomedical applications. In this study, we systematically examined the effects of electrospinning and crosslinking conditions on the properties of pectin nanofiber mats. The properties of mats were tunable in the range of 200-400 nm fiber size, 11-21% ADH residue content, 13-28 times absorbency, 13°-21° contact angle, 2 weeks or longer degradation time, 1.5-2.2 MPa tensile strength, 40-70% elongation, and 0.25-0.27 g/(cm²·24 h) permeability. Increasing polymer concentration, adipic acid dihydrazide amount, time or temperature could increase fiber size and its tensile strength, and decrease the absorbency, hydrophilicity, degradation rate, and elongation. These results indicate that controlling the process parameters can effectively regulate the properties of pectin nanofiber mats and meet the requirements of various biomedical applications.

Hyaluronic acid nanofibers crosslinked with a nontoxic reagent

The poor water resistance of the eletrospun hyaluronic acid (HA) nanofibers prevents their biomedical applications. In this manuscript, we crosslinked HA nanofibers with the periodate oxidation - adipic acid dihydrazide (ADH) crosslinking strategy. Quantification results showed that ∼ 57 % of aldehydes in oxidized HA were crosslinked by ADH and the crosslinking density could reach 75.7 %. Correspondingly, the crosslinked HA nanofiber mats exhibited wet tensile strength up to 0.88 MPa and could maintain their nanofibrous morphology after 14 days in simulated body fluid. Although ∼ 28 % of the aldehydes in oxidized HA were unreacted, the crosslinked HA nanofibers did not cause toxicity to L929 fibroblast cells, possibly because that the unreacted aldehyde groups were linked on macromolecular fragments and could not go across cell membranes. The water resistant and biocompatible HA nanofibers are expected to seek extensive applications in biomedical fields such as wound healing, adhesion prevention, and tissue engineering.

Review on Spinning of Biopolymer Fibers from Starch

Increasing interest in bio-based polymers and fibers has led to the development of several alternatives to conventional plastics and fibers made of these materials. Biopolymer fibers can be made from renewable, environmentally friendly resources and can be fully biodegradable. Biogenic resources with a high content of carbohydrates such as starch-containing plants have huge potentials to substitute conventional synthetic plastics in a number of applications. Much literature is available on the production and modification of starch-based fibers and blends of starch with other polymers. Chemistry and structure–property relationships of starch show that it can be used as an attractive source of raw material which can be exploited for conversion into a number of high-value bio-based products. In this review, possible spinning techniques for the development of virgin starch or starch/polymer blend fibers and their products are discussed. Beneficiation of starch for the development of bio-based fibers can result in the sustainable replacement of oil-based high-value materials with cost-effective, environmentally friendly, and abundant products.

An antimicrobial peptide-immobilized nanofiber mat with superior performances than the commercial silver-containing dressing

Silver-containing dressings are widely used for the treatment of infected wounds in clinics, but the potential risks of heavy metals are still a common concern. In this study, we prepared a type of electrospun starch nanofiber mat containing the antimicrobial peptide ε-poly-lysine (Starch-EPL) and compared its relevant properties with a representative silver-containing dressing 3M™ Tegaderm™ Alginate Ag (Alginate-Ag). SEM, FTIR and EDAX results show the two samples have similar fiber structures and are loaded with antibacterial agents. The comparison results indicate that the Starch-EPL nanofiber mat has equivalent permeability and absorbency with Alginate-Ag but higher mechanical property and wettability. Moreover, the Starch-EPL nanofiber mat has comparable antibacterial activity against both Gram-negative and Gram-positive bacteria with Alginate-Ag, but markedly better biocompatibility than that. The Starch-EPL nanofiber mat can inhibit the growth of bacteria for at least 14 days by sustainably releasing EPL, showing great potential as a long-term antibacterial dressing. All these results demonstrate that the Starch-EPL nanofiber mat may be a good candidate to replace the traditional silver-containing dressings.

AgNPs-incorporated nanofiber mats: Relationship between AgNPs size/content, silver release, cytotoxicity, and antibacterial activity

Silver nanoparticles (AgNPs) have a wide antimicrobial spectrum and low incidence of resistance. They have been widely incorporated into wound dressings for antimicrobial purpose. However, these wound dressings suffer from the accompanied cytotoxicity. It is important but challenging for them to reduce the cytotoxicity without compromising antimicrobial activity, while the affecting factors are unknown. In this work, we incorporated AgNPs into starch nanofiber mats with the in situ reduction method, and investigated the structure and property of the composite nanofiber mats in detail. We found that the cytotoxicity and antibacterial activity of the starch/AgNPs composite nanofiber mats are both affected by the release behavior of silver from the mats, while of various stages and governing factors. The cytotoxicity of the mats depends on the silver release rate at the early stage, which is governed by both the size and content of the AgNPs. The antibacterial activity is more related to the silver release rate at the later stage and is determined mainly by the content of AgNPs. By optimizing the size and content of AgNPs, we found a safe window and obtained starch/AgNPs composite nanofiber mats with good antibacterial activity and excellent cytocompatibility as well. The composite nanofiber mats also showed moderate wet strength (1-2 MPa), high liquid absorption capability (19-34 times of their own weights) and suitable vapor permeability [0.22-0.26 g/(cm²·24 h)]. These starch/AgNPs composite nanofiber mats are ideal candidates for the treatment of infected and exuding wounds.