Design and fabrication of electrospun SBA-15-incorporated PVA with curcumin: a biomimetic nanoscaffold for skin tissue engineering

Novel electro-spun fabrication of blended polymeric nanofibrous wound closure materials loaded with catechin to improve wound healing potential and microbial inhibition for the care of diabetic wound

Diabetic wound infections caused by the multiplication of infectious pathogens and their antibiotic resistance. Wound infection evident by bacterial colonization and other factors, such as the virulence and host immune factors. In this context, we need discover appropriate treatment and effective antibiotics for wound infection control. Considering this, we synthesized catechin-loaded polyvinyl alcohol/Chitosan (PVA/CS) based nanofiber for multifunctional wound healing. The physicochemical and biological properties of fabricated nanofiber, were systematically evaluated by various spectroscopy and microscopy techniques. The CA@PVA/CS nanofiber exhibited a high level of antibacterial and antioxidant effects. The nanofibers showed effective control in gram-positive and negative wound infectious bacterial multiplication at the lowest concentration. Based on the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) cell viability study CA@PVA/CS nanofiber shows excellent biocompatibility against L929 cells. In wound, scratch assay results revealed that the CA@PVA/CS treated group shows enhanced cell migration and cell proliferation within 48 h. The synthesis of antioxidant, antibacterial, and biocompatible nanofiber exposes their potential for effective wound healing. Current research hypothesized catechin loaded PVA/CS nanofiber could be a multifunctional and low-cost material for diabetic wound care application. Fabricated nanofiber would be improved skin tissue regeneration and public health hygiene.

Biomedical Application of Decellularized Scaffolds

Tissue loss and end-stage organ failure are serious health problems across the world. Natural and synthetic polymer scaffold material based artificial organs play an important role in the field of tissue engineering and organ regeneration, but they are not from the body and may cause side effects such as rejection. In recent years, the biomimetic decellularized scaffold based materials have drawn great attention in the tissue engineering field for their good biocompatibility, easy modification, and excellent organism adaptability. Therefore, in this review, we comprehensively summarize the application of decellularized scaffolds in tissue engineering and biomedicine in recent years. The preparation methods, modification strategies, construction of artificial tissues, and application in biomedical applications are discussed. We hope that this review will provide a useful reference for research on decellularized scaffolds and promote their application tissue engineering.

PEGylated curcumin-loaded poly(vinyl alcohol)/Zwitterionic poly(sulfobetaine vinylimidazole)-grafted chitosan nanofiber as a second-degree burn wound dressing

Burn injuries damage skin function and increased the risk of infection. Using natural-inspired antibiotic-free nanofibrous in wound healing has attracted increasing attention. Here, mPEG-Curcumin (mPEG-CUR) was synthesized through a novel, cheap, and high-efficiency method, and incorporated onto poly(vinyl alcohol) (PVA)/zwitterionic poly(sulfobetaine vinylimidazole)-grafted chitosan (CS-g-PNVIS) nanofiber. Due to the lack of electrospinning capability of CS-g-PNVIS and its brittleness, to obtain nanofibers with uniform and bead-free morphology, PVA was used as an electrospinning aid polymer, so that the prepared nanofibers have suitable mechanical properties with an average diameter between 115 ± 18-157 ± 39 nm. The heat-treated nanofibers have adequate swelling and dimensional stability. Time-killing assay proved the antibacterial activity of the mPEG-CUR-loaded nanofibers towards Gram-positive and Gram-negative bacterium. The MTT investigation illustrated the non-cytotoxicity and biocompatibility of the nanofibers. In vivo studies exhibited significant improvement in the mean wound area closure by applying mPEG-CUR nanofibers. The mPEG-CUR-loaded nanofibers showed the highest antioxidant (86 %) power after 40 min. Moreover, nanofibers possess a desirable WVT rate (3.4 ± 0.24-5.5 ± 0.3 kg/m2.d) and good breathability and had the potential to supply a suitable moist environment in the wounded area. This approach can be the beginning of a new path in designing a new generation of nanofiber mats for wound healing applications.

Wound healing performance of electrospun PVA/70S30C bioactive glass/Ag nanoparticles mats decorated with curcumin: In vitro and in vivo investigations

Biocompatible fibrous scaffold containing polyvinyl alcohol (PVA), 70S30C bioactive glass (BG), silver (Ag) nanoparticles and curcumin (Cur) was fabricated through electrospinning method. Scanning electron microscope (SEM) and Field emission scanning electron microscopy (FESEM) were employed to investigate the morphological characteristics of the scaffolds. In addition, biodegradability, hydrophilicity, and contact angle were studied as criteria for evaluating physical properties of the scaffolds. Tensile strength was reported to be 0.971 ± 0.093 MPa. Also, the viability of fibroblasts after 7 days of cell culture was 93.58 ± 1.36 %. The antibacterial activity against Escherichia coli and Staphylococcus aureus bacteria was illustrated using inhibition zones of 13.12 ± 0.69 and 14.21 ± 1.37 mm, respectively. Histological results revealed that tissue regeneration after 14 days of surgery was much higher for the dressing group compared to the blank group. According to the obtained results, the authors introduce the PVA-BG-Ag-Cur scaffold as a promising candidate for skin tissue engineering applications.

Curcumin-based nanoformulations alleviate wounds and related disorders: A comprehensive review

Despite numerous advantages, curcumin's (CUR) low solubility and low bioavailability limit its employment as a free drug. CUR-incorporated nanoformulation enhances the bioavailability and angiogenesis, collagen deposition, fibroblast proliferation, reepithelization, collagen synthesis, neovascularization, and granulation tissue formation in different wounds. Designing nanoformulations with controlled-release properties ensure the presence of CUR in the defective area during treatment. Different nanoformulations encompassing nanofibers, nanoparticles (NPs), nanospray, nanoemulsion, nanosuspension, nanoliposome, nanovesicle, and nanomicelle were described in the present study comprehensively. Moreover, for some other systems which contain nano-CUR or CUR nanoformulations, including some nanofibers, films, composites, scaffolds, gel, and hydrogels seems the CUR-loaded NPs incorporation has better control of the sustained release, and thereby, the presence of CUR until the final stages of wound healing is more possible. Incorporating CUR-loaded chitosan NPs into nanofiber increased the release time, while 80% of CUR was released during 240 h (10 days). Therefore, this system can guarantee the presence of CUR during the entire healing period. Furthermore, porous structures such as sponges, aerogels, some hydrogels, and scaffolds disclosed promising performance. These architectures with interconnected pores can mimic the native extracellular matrix, thereby facilitating attachment and infiltration of cells at the wound site, besides maintaining a free flow of nutrients and oxygen within the three-dimensional structure essential for rapid and proper wound healing, as well as enhancing mechanical strength.

Transforming Wound Management: Nanomaterials and Their Clinical Impact

Wound healing is a complex process that can be further complicated in chronic wounds, leading to prolonged healing times, high healthcare costs, and potential patient morbidity. Nanotechnology has shown great promise in developing advanced wound dressings that promote wound healing and prevent infection. The review article presents a comprehensive search strategy that was applied to four databases, namely Scopus, Web of Science, PubMed, and Google Scholar, using specific keywords and inclusion/exclusion criteria to select a representative sample of 164 research articles published between 2001 and 2023. This review article provides an updated overview of the different types of nanomaterials used in wound dressings, including nanofibers, nanocomposites, silver-based nanoparticles, lipid nanoparticles, and polymeric nanoparticles. Several recent studies have shown the potential benefits of using nanomaterials in wound care, including the use of hydrogel/nano silver-based dressings in treating diabetic foot wounds, the use of copper oxide-infused dressings in difficult-to-treat wounds, and the use of chitosan nanofiber mats in burn dressings. Overall, developing nanomaterials in wound care has complemented nanotechnology in drug delivery systems, providing biocompatible and biodegradable nanomaterials that enhance wound healing and provide sustained drug release. Wound dressings are an effective and convenient method of wound care that can prevent wound contamination, support the injured area, control hemorrhaging, and reduce pain and inflammation. This review article provides valuable insights into the potential role of individual nanoformulations used in wound dressings in promoting wound healing and preventing infections, and serves as an excellent resource for clinicians, researchers, and patients seeking improved healing outcomes.

Enhanced wound-healing efficacy of electrospun mesoporous hydroxyapatite nanoparticle-loaded chitosan nanofiber developed using pluronic F127

One of the goals of wound repairing is to mimic the function and architecture of the native extracellular matrix (ECM). To this end, for the first time, we used pluronic F127 and mesoporous rod-like hydroxyapatite nanoparticles (mr-HAP NPs) simultaneously to prepare a novel low-diameter electrospun ECM-mimicking wound dressing based on a mixture of chitosan and polyethylene oxide. F127 is used as a surface tension regulator of the polymer solution. In addition, F127 has the special ability to reduce the size of nanofibers. mr-HAP NPs are used as cell proliferation accelerators which also improve the mechanical properties and water uptake capacity of the as-prepared dressing. The average size of nanofibers in the presence of F127 was about 110 nm which was >2.5 times lower than nanofibers prepared without F127. The water uptake capacity was evaluated to investigate the wound exudate absorption capacity of the wound dressing. It was observed that the incorporation of mr-HAP NPs into wound dressing structure increases the water uptake capacity by >2.5 times. Alongside the evaluation of cytocompatibility through in vitro cell viability assay, the wound healing efficacy was also determined in full-thickness skin wounds in a rat model for 15 days. The cytocompatible wound dressing showed significantly higher wound closure efficacy than the control group so the wounds healed entirely on the last day of the treatment period. As well, the pathology analysis proved better granulation tissue development and greater re-epithelialization. These findings are by virtue of the improved mechanical properties, accelerated cell migration and proliferation, proper environment for oxygen exchange, and enhanced exudate uptake of the wound dressing. These all are due to the presence of F127 and mr-HAP.

Synthesis of Coal-Fly-Ash-Based Ordered Mesoporous Materials and Their Adsorption Application

A feasible approach was developed for the synthesis of ordered mesoporous SBA-15-type materials using coal fly ash (CFA) as raw material. In the proposed approach, CFA was, firstly, activated by subcritical water with the addition of NaOH, which allowed an efficient extraction of silicon species from CFA under strong acidic conditions at near room temperature. Subsequently, in the synthesis system, using silicon extraction solution as the silicon precursor, the introduction of anhydrous ethanol as a co-solvent effectively inhibited the polymerization of silanol species and promoted their collaborative self-assembly with surfactant molecules by enhancing the hydrogen bond interactions. The resultant SBA-15 material had a high purity, high specific surface area (1014 m²/g) and pore volume (1.08 cm³/g), and a highly ordered mesostructure, and, therefore, exhibited an excellent removal efficiency (90.5%) and adsorption capacity (160.8 mg/g) for methylene blue (MB) from simulated wastewater. Additionally, the generation of surface acid sites from the homogenous incorporation of Al atoms onto the mesoporous walls of SBA-15 combined with the perfect retention of the ordered mesostructure endowed the obtained Al-SBA-15 material with a further boost in the removal performance of MB. The MB removal efficiency can reach ~100%, along with a maximum adsorption capacity of 190.1 mg/g.

Mesoporous Silica Nanoparticles as a Potential Nanoplatform: Therapeutic Applications and Considerations

With advances in nanotechnology, nanoparticles have come to be regarded as carriers of therapeutic agents and have been widely studied to overcome various diseases in the biomedical field. Among these particles, mesoporous silica nanoparticles (MSNs) have been investigated as potential nanocarriers to deliver drug molecules to various target sites in the body. This review introduces the physicochemical properties of MSNs and synthesis procedures of MSN-based nanoplatforms. Moreover, we focus on updating biomedical applications of MSNs as a carrier of therapeutic or diagnostic cargo and review clinical trials using silica-nanoparticle-based systems. Herein, on the one hand, we pay attention to the pharmaceutical advantages of MSNs, including nanometer particle size, high surface area, and porous structures, thus enabling efficient delivery of high drug-loading content. On the other hand, we look through biosafety and toxicity issues associated with MSN-based platforms. Based on many reports so far, MSNs have been widely applied to construct tissue engineering platforms as well as treat various diseases, including cancer, by surface functionalization or incorporation of stimuli-responsive components. However, even with the advantageous aspects that MSNs possess, there are still considerations, such as optimizing physicochemical properties or dosage regimens, regarding use of MSNs in clinics. Progress in synthesis procedures and scale-up production as well as a thorough investigation into the biosafety of MSNs would enable design of innovative and safe MSN-based platforms in biomedical fields.

Interactions of Antibacterial Naphthoquinones with Mesoporous Silica Surfaces: A Physicochemical and Theoretical Approach

1,4-naftoquinone (NQ) molecules have been extensively evaluated as potent antibacterial compounds; however, their use is limited, since they have low water solubility and exhibit toxicities in healthy eukaryotic cells. A possible path to overcoming these challenges is the use of particulate vehicles, such as SBA-15, which is a biocompatible and biodegradable mesoporous silica material, that may enhance drug delivery and decrease dosages. In this work, an isotherm model-based adsorption of three NQs into SBA-15 microparticles was evaluated. Interactions between NQs and SBA-15 microparticles were modeled at the B3LYP/6-31+G(d,p) level of theory to understand the nature of such interactions. The results demonstrated that the adsorption of NQ, 2NQ, and 5NQ into SBA-15 fit the Freundlich adsorption model. According to theorical studies, physisorption is mediated by hydrogen bonds, while the most stable interactions occur between the carbonyl group of NQ and silica surfaces. Both experimental and theoretical results contribute to a deeper understanding of the use of SBA-15 or similar particles as nanovehicles in such a way that NQs can be modified in carbonyl or C3 to enhance adsorptions. The theoretical and experimental results were in accordance and contribute to a deeper understanding of how interactions between NQ-type molecules and SiO₂ materials occur.

Curcumin-Loaded Silica Nanoparticles: Applications in Infectious Disease and Food Industry

Curcumin has multiple properties that are used to cure different diseases such as cancer, infections, inflammatory, arthritic disease, etc. Despite having many effects, the inherent physicochemical properties-such as poor water solubility, chemical instability, low bioavailability, photodegradation, fast metabolism, and short half-life-of curcumin's derivatives have limited its medical importance. Recently, unprecedented advances in biomedical nanotechnology have led to the development of nanomaterial-based drug delivery systems in the treatment of diseases and diagnostic goals that simultaneously enhance therapeutic outcomes and avoid side effects. Mesoporous silica nanoparticles (MSNs) are promising drug delivery systems for more effective and safer treatment of several diseases, such as infections, cancers, and osteoporosis. Achieving a high drug loading in MSNs is critical to the success of this type of treatment. Their notable inherent properties-such as adjustable size and porosity, high pore volume, large surface area, functionality of versatile surfaces, as well as biocompatibility-have prompted extraordinary research on MSNs as multi-purpose delivery platforms. In this review, we focused on curcumin-loaded silica nanoparticles and their effects on the diagnosis and treatment of infections as well as their use in food packaging.

Recent Progress and Potential Biomedical Applications of Electrospun Nanofibers in Regeneration of Tissues and Organs

Electrospun techniques are promising and flexible technologies to fabricate ultrafine fiber/nanofiber materials from diverse materials with unique characteristics under optimum conditions. These fabricated fibers/nanofibers via electrospinning can be easily assembled into several shapes of three-dimensional (3D) structures and can be combined with other nanomaterials. Therefore, electrospun nanofibers, with their structural and functional advantages, have gained considerable attention from scientific communities as suitable candidates in biomedical fields, such as the regeneration of tissues and organs, where they can mimic the network structure of collagen fiber in its natural extracellular matrix(es). Due to these special features, electrospinning has been revolutionized as a successful technique to fabricate such nanomaterials from polymer media. Therefore, this review reports on recent progress in electrospun nanofibers and their applications in various biomedical fields, such as bone cell proliferation, nerve regeneration, and vascular tissue, and skin tissue, engineering. The functionalization of the fabricated electrospun nanofibers with different materials furnishes them with promising properties to enhance their employment in various fields of biomedical applications. Finally, we highlight the challenges and outlooks to improve and enhance the application of electrospun nanofibers in these applications.

Mesoporous silica incorporated PCL/Curcumin nanofiber for wound healing application

Electrospinning, a recent fast-emerging technique highly applicable in the production of nanofibers has gained vast recognition owing to its explicit applications in various domains. Amongst which, the production of nanoscaffolds for wound healing applications has been focused recently due to advantages over conventional wound healing methods. In the present research, a composite nanoscaffold comprising SBA-15 (Santa Barbara Amorphous), amine functionalized SBA-15 polycaprolactone (PCL) and curcumin was investigated for its potentiality in wound healing therapeutics. The high biocompatibility and cell adhesion of amine functionalized SBA-15 and the widely explored antimicrobial properties of curcumin added benefit for the wound healing target. The prepared highly interconnected electrospun fibers with porous structure were characterized through various studies such as FTIR, XRD, SEM and EDAX. Further, antibacterial studies against both Gram positive (Bacillus subtilis) and Gram negative (Escherichia coli) strains revealed an improved zone of inhibition. Major invitro studies such as cell migration, proliferation, bio-compatibility was experimented through cell adhesion and live and dead assay using Swiss 3T6 cell lines. In vivo studies on female Wister rats using the fabricated nanofibers incorporated with curcumin and amine functionalized SBA-15 showed 99% scar-less wound healing within 21 days. Re-epithelization of tissue, collagen deposition and formation of granulation tissue were observed from the results of Hematoxylin-Eosin and Masson's tri-chrome staining. From the observations, it can be concluded that the fabricated nanoscaffold could be an effective substrate for wound healing therapeutics.

Design and development of electrospun SPEEK incorporated with aminated zirconia and curcumin nanofibers for periodontal regeneration

Periodontal disease disturbs the supportive tissues around the teeth such as connective tissue, gingival tissue, periodontal ligaments and alveolar bone. Previously, treatment of periodontitis was embattled by repopulating the affected site with cells that has capacity to regenerate damaged tissue by endorsing the perception of guided tissue regeneration but it entails additional surgery owing to non-biodegradability. Biodegradable polymeric nanofibrous scaffold imitating extracellular matrix (ECM) delivering functionalized nanoparticles loaded with therapeutic drug have the ability to support cellular functions thereby enhancing regeneration. Present study explores novel amine functionalized zirconia nanoparticle loaded curcumin incorporated SPEEK nanofibrous scaffolds to address periodontal regeneration. Zirconia - crown of dental therapeutics, its amine functionalization further enhanced the strength and cyto-compatibility. Carbon-Silica NMR (59.9 and 69.8 ppm), FT-IR (3426 cm^-1), EDAX and XRD (28.9°_, 31.6° and 38.2° pertaining to [-1 1 1], [1 1 1] and [1 2 0] planes) analysis confirmed the effective functionalization of the zirconia nanoparticle with the amine group. Electrospinning was carried out at a voltage of 20 kV and flow rate of 0.05 ml/h. Fabricated nanofibers were highly dense, porous with interconnected fibrous structures that bio-mimic ECM. They exhibited an average diameter of 187 ± 2 nm (SPEEK), 192 ± 2 nm (SPEEK + NH₂-ZrO₂), and 256 ± 17 nm (SPEEK + NH₂-ZrO₂+Cur). Extensively discovered anti-bacterial traits of curcumin supplemented the advantage for the treatment of periodontitis. Incorporated materials improve the physico-chemical, mechanical and biological characteristics of nanofibers. FT-IR, EDAX and XRD analysis of the fabricated nanofibrous scaffold demonstrated the effective incorporation of aminated zirconia loaded curcumin. Results of cyto-compatibility analysis of SPEEK + NH₂-ZrO₂+Cur nanofibrous scaffold depicted a cell viability of 100 ± 1.62%. Results of anti-bacterial assay with zone of inhibition was 6.5 ± 0.5 mm (SPEEK), 7.5 ± 1 mm (SPEEK + NH₂-ZrO₂), and 8 ± 1 mm (SPEEK + NH₂-ZrO₂+Cur). Thus, the fabricated bio-material is cyto-compatible, non-toxic and effective against pathogens exploiting higher potential for periodontal regeneration applications.

Improvement of the Wound-Healing Process by Curcumin-Loaded Chitosan/Collagen Blend Electrospun Nanofibers: In Vitro and In Vivo Studies

Chronic wounds have become a major health problem worldwide. Curcumin (Cur), with strong anti-inflammatory and anti-infective properties, is introduced as a unique molecule for wound dressing applications. In the present study, Cur-loaded chitosan/poly(ethylene oxide)/collagen (Cho/PEO/Col) nanofibers were developed for wound dressing applications by the blend-electrospinning process. Structural, mechanical, and biological properties of nanofibers were evaluated using SEM, FTIR, tensile testing, in vitro release study, Alamar blue cytotoxicity assay, and in vivo study in a rat model. According to the results, Cur was successfully released up to 3 days without any significant cytotoxicity of the above hybrid to human dermal fibroblasts. In vivo studies on full-thickness wounds in the rat model indicated significant improvement in the mean wound area closure by applying Cur-loaded Cho/PEO/Col nanofibers. The electrospun Cho/PEO/Col nanofibers loaded with Cur could be considered as a promising type of wound dressing in the wound-healing process.

Design and fabrication of electrospunMorinda citrifolia-based nanofibrous scaffold as skin wound dressing material:in vitroandin silicoanalysis

Wound healing is an urgent problem that impacts quality of life, and the need for biomaterials suitable for the treatment of skin wound healing disease is increasing annually. Innovative biomaterials and treatments for skin abrasions are being relentlessly researched and established in order to improve treatment efficacy. Here, we describe a novel electrospun polymeric nanofibrous scaffold enriched with pharmaceutical bioactive materials extracted fromMorinda citrifolia(MC), which demonstrated efficient skin wound healing therapy due to its excellent human skin keratinocyte proliferation and adhesion inin vitroanalysis. Surface morphological analysis was used to reveal the nano-architectural structure of the electrospun scaffolds. The fabricated nanofibers displayed good antibacterial efficacy by creating an inhibitory zone for the pathogenic microbes studied. MC supported active healing due to the presence of pharmaceuticals associated with wound healing, as revealed by the results of gas chromatography-mass spectrometry and the prediction of activity spectra for substances (PASS) analysis. Since MC is a multi-potential therapeutic herbal plant, it was found that the linoleic acid, olelic acid, and diethyl phthalate present in the extract supported the wound healing proteins glycogen-synthase-kinase-3-β-protein and Protein Data Bank-1Q5K with binding energies of -4.6, -5.2, and -5.9 kcal mol^-1, as established by the results ofin silicoanalysis. Thus, by being hydrophilic in nature, targeting wound proteins, increasing the proliferation and adhesion of keratinocytes and combating pathogens, the nanofibrous scaffolds endowed with MC extract proved to be an effective therapeutic material for skin wound dressing applications.