Tissue Engineering Microtissue: Construction, Optimization, and Application

Decellularized extracellular matrix-loaded exosome hydrogel for cell-free tracheal scaffold in tracheal defect reconstruction and repair

Tracheal reconstruction presents a significant global clinical challenge due to the unique structure and function of the trachea, which complicates its repair. Key challenges include restoring tracheal function post-transplantation, managing surgical complications, and ensuring the long-term survival of transplanted tissue. Furthermore, adequate vascularization of the transplanted trachea, along with the repair of cartilage and epithelial cells, is critical for facilitating functional recovery and successful reconstruction. In this study, a decellularized tracheal matrix was extracted to preserve its natural bioactivity. Nanoclay and GelMA were then employed as carrier materials to integrate with the decellularized tracheal matrix, forming a hydrogel scaffold. Both nanoclay and GelMA offer tunable porous structures and surface properties that promote cell adhesion and proliferation, while providing sufficient mechanical support. By leveraging the biological functions of endothelial progenitor cell-derived exosomes, we successfully loaded exosomes onto the decellularized extracellular matrix, creating a novel cell-free tracheal scaffold for investigating tracheal defect repair. The scaffold exhibited excellent biocompatibility, promoting graft vascularization and facilitating the repair of tracheal cartilage and epithelium. These findings hold significant promise for advancing tracheal reconstruction surgery and offer valuable insights for future research in this area.

High paracrine activity of hADSCs cartilage microtissues inhibits extracellular matrix degradation and promotes cartilage regeneration

Due to its unique structure, articular cartilage has limited self-repair capacity. Microtissues are tiny tissue clusters that can mimic the function of target organs or tissues. Using cells alone for microtissue construction often results in the formation of necrotic cores. However, the extracellular matrix (ECM) of native cartilage can provide structural support and is an ideal source of microcarriers. Autologous adipose-derived mesenchymal stem cells (ADSCs) and bone marrow mesenchymal stem cells (BMSCs) are widely used in cartilage tissue engineering. In this study, we fabricated microcarriers and compared the behavior of two homologous cell types in the microcarrier environment. The microcarrier environment highlighted the advantages of ADSCs and promoted the proliferation and migration of these cells. Then, ADSCs microtissues (ADSCs-MT) and BMSCs microtissues (BMSCs-MT) were fabricated using a three-dimensional dynamic culture system. In vitro and in vivo experiments verified that the cartilage regeneration ability of ADSCs-MT was significantly superior to that of BMSCs-MT. Transcriptomics revealed that ADSCs-MT showed significantly lower expression levels of ECM degradation, osteogenesis, and fibrocartilage markers. Finally, the protective effect of microtissues on inflammatory chondrocytes was validated. Overall, the ADSCs-MT constructed in this study achieved excellent cartilage regeneration and could be promising for the autologous application of cartilage microtissues.

Growth Factor Stimulation Regimes to Support the Development and Fusion of Cartilage Microtissues

Scaffold-free tissue engineering strategies using cellular aggregates, microtissues, or organoids as "biological building blocks" could potentially be used for the engineering of scaled-up articular cartilage or endochondral bone-forming grafts. Such approaches require large numbers of cells; however, little is known about how different chondrogenic growth factor stimulation regimes during cellular expansion and differentiation influence the capacity of cellular aggregates or microtissues to fuse and generate hyaline cartilage. In this study, human bone marrow mesenchymal stem/stromal cells (MSCs) were additionally stimulated with bone morphogenetic protein 2 (BMP-2) and/or transforming growth factor (TGF)-β1 during both monolayer expansion and subsequent chondrogenic differentiation in a microtissue format. MSCs displayed a higher proliferative potential when expanded in the presence of TGF-β1 or TGF-β1 and BMP-2. Next, the chondrogenic potential of these human MSCs was explored in a medium-high throughput microtissue system. After 3 weeks of culture, MSCs stimulated with BMP-2 during expansion and differentiation deposited higher levels of glycosaminoglycans (GAGs) and collagen, while staining negative for calcium deposits. The fusion capacity of the microtissues was not impacted by these different growth factor stimulation regimes. After 3 weeks of fusion, it was observed that MSCs stimulated with TGF-β1 during expansion and additionally with BMP-2 during chondrogenic differentiation deposited the highest levels of sulfated GAGs. No increase in type X collagen deposition was observed with additional growth factor stimulation. This study demonstrates the importance of carefully optimizing MSC expansion and differentiation conditions when developing modular tissue engineering strategies (e.g., cellular aggregates and microtissues) for cartilage tissue engineering applications.

Current Advances in Viral Nanoparticles for Biomedicine

Viral nanoparticles (VNPs) have emerged as crucial tools in the field of biomedicine. Leveraging their biological and physicochemical properties, VNPs exhibit significant advantages in the prevention, diagnosis, and treatment of human diseases. Through techniques such as chemical bioconjugation, infusion, genetic engineering, and encapsulation, these VNPs have been endowed with multifunctional capabilities, including the display of functional peptides or proteins, encapsulation of therapeutic drugs or inorganic particles, integration with imaging agents, and conjugation with bioactive molecules. This review provides an in-depth analysis of VNPs in biomedicine, elucidating their diverse types, distinctive features, production methods, and complex design principles behind multifunctional VNPs. It highlights recent innovative research and various applications, covering their roles in imaging, drug delivery, therapeutics, gene delivery, vaccines, immunotherapy, and tissue regeneration. Additionally, the review provides an assessment of their safety and biocompatibility and discusses challenges and future opportunities in the field, underscoring the vast potential and evolving nature of VNP research.

Biocompatibility and expression of transcription factors of a type B gelatin-Extracellular Matrix of Porcin Urinary Blader scaffold

OBJECTIVE

to evaluate a membrane based on type B gelatin (G) and porcine urinary bladder extracellular matrix (PUB-EM), highlighting the potential effect of the combination evaluated by biocompatibility and regulation of the expression of transcription factors involved in tissue regeneration. G-PUB-EM membranes were prepared at 12.5, 25, and 50% w/v, and evaluated for biocompatibility with Fibroblast. Chemical characterization by FTIR-ATR showed complex spectra during crosslinking process with glutaraldehyde. Physical tests were performed in deionized water and PBS for 48 h. A significant increase in swelling was observed during the first 2 h. Biocompatibility testing (MTS) and evaluation of the expression profile of genes involved in the cell cycle (Cyclin-D1 VEGF, TNF and NF-κ-B) by PCR showed an increase in viability in a PUB-EM content-dependent way, except for 50% PUB-EM membrane which showed cytotoxic effects with a decrease in cell viability below 70%. The membranes showed an increase in the expression of some factors of cell cycle, as well as inflammatory processes that could promote tissue repair. 12.5 and 25% gelatin type B/porcine urinary bladder extracellular matrix (G/PUB-EM) based membranes have potential for tissue regeneration applications.

IMPACT STATEMENT

The use of membranes based on type B gelatin and porcine urinary bladder for tissue engineering represents a novel strategy. Biocompatibility and signaling pathways play a primary role in tissue repair and wound recovery. Transcription factors that mediate signaling, cell division and vascularization are part of molecules that intervene in the regenerative potential of cells. These techniques will have a significant impact on tissue repair and regeneration and thus stop depending on tissue donors or other surgical sites from the same patient, as is the case with burn patients.

Strategies to decouple cell micro-scale and macro-scale environments for designing multifunctional biomimetic tissues

The regulation of cellular behavior within a three-dimensional (3D) environment to execute a specific function remains a challenge in the field of tissue engineering. In native tissues, cells and matrices are arranged into 3D modular units, comprising biochemical and biophysical signals that orchestrate specific cellular activities. Modular tissue engineering aims to emulate this natural complexity through the utilization of functional building blocks with unique stimulation features. By adopting a modular approach and using well-designed biomaterials, cellular microenvironments can be effectively decoupled from their macro-scale surroundings, enabling the development of engineered tissues with enhanced multifunctionality and heterogeneity. We overview recent advancements in decoupling the cellular micro-scale niches from their macroenvironment and evaluate the implications of this strategy on cellular and tissue functionality.

Light-based 3D bioprinting technology applied to repair and regeneration of different tissues: A rational proposal for biomedical applications

3D bioprinting technology, a subset of 3D printing technology, is currently witnessing widespread utilization in tissue repair and regeneration endeavors. In particular, light-based 3D bioprinting technology has garnered significant interest and favor. Central to its successful implementation lies the judicious selection of photosensitive polymers. Moreover, by fine-tuning parameters such as light irradiation time, choice of photoinitiators and crosslinkers, and their concentrations, the properties of the scaffolds can be tailored to suit the specific requirements of the targeted tissue repair sites. In this comprehensive review, we provide an overview of commonly utilized bio-inks suitable for light-based 3D bioprinting, delving into the distinctive characteristics of each material. Furthermore, we delineate strategies for bio-ink selection tailored to diverse repair locations, alongside methods for optimizing printing parameters. Ultimately, we present a coherent synthesis aimed at enhancing the practical application of light-based 3D bioprinting technology in tissue engineering, while also addressing current challenges and future prospects.

Injectable cartilage microtissues based on 3D culture using porous gelatin microcarriers for cartilage defect treatment

Cartilage tissues possess an extremely limited capacity for self-repair, and current clinical surgical approaches for treating articular cartilage defects can only provide short-term relief. Despite significant advances in the field of cartilage tissue engineering, avoiding secondary damage caused by invasive surgical procedures remains a challenge. In this study, injectable cartilage microtissues were developed through 3D culture of rat bone marrow mesenchymal stem cells (BMSCs) within porous gelatin microcarriers (GMs) and induced differentiation. These microtissues were then injected for the purpose of treating cartilage defects in vivo, via a minimally invasive approach. GMs were found to be noncytotoxic and favorable for cell attachment, proliferation and migration evaluated with BMSCs. Moreover, cartilage microtissues with a considerable number of cells and abundant extracellular matrix components were obtained from BMSC-laden GMs after induction differentiation culture for 28 days. Notably, ATDC5 cells were complementally tested to verify that the GMs were conducive to cell attachment, proliferation, migration and chondrogenic differentiation. The microtissues obtained from BMSC-laden GMs were then injected into articular cartilage defect areas in rats and achieved superior performance in alleviating inflammation and repairing cartilage. These findings suggest that the use of injectable cartilage microtissues in this study may hold promise for enhancing the long-term outcomes of cartilage defect treatments while minimizing the risk of secondary damage associated with traditional surgical techniques.

Harnessing three-dimensional porous chitosan microsphere embedded with adipose-derived stem cells to promote nerve regeneration

BACKGROUND

Nerve guide conduits are a promising strategy for reconstructing peripheral nerve defects. Improving the survival rate of seed cells in nerve conduits is still a challenge and microcarriers are an excellent three-dimensional (3D) culture scaffold. Here, we investigate the effect of the 3D culture of microcarriers on the biological characteristics of adipose mesenchymal stem cells (ADSCs) and to evaluate the efficacy of chitosan nerve conduits filled with microcarriers loaded with ADSCs in repairing nerve defects.

METHODS

In vitro, we prepared porous chitosan microspheres by a modified emulsion cross-linking method for loading ADSCs and evaluated the growth status and function of ADSCs. In vivo, ADSCs-loaded microcarriers were injected into chitosan nerve conduits to repair a 12 mm sciatic nerve defect in rats.

RESULTS

Compared to the conventional two-dimensional (2D) culture, the prepared microcarriers were more conducive to the proliferation, migration, and secretion of trophic factors of ADSCs. In addition, gait analysis, neuro-electrophysiology, and histological evaluation of nerves and muscles showed that the ADSC microcarrier-loaded nerve conduits were more effective in improving nerve regeneration.

CONCLUSIONS

The ADSCs-loaded chitosan porous microcarrier prepared in this study has a high cell engraftment rate and good potential for peripheral nerve repair.

Global Bibliometric and Visualized Analysis of Tracheal Tissue Engineering Research

The development of tracheal tissue engineering (TTE) has seen a rapid growth in recent years. The purpose of this study was to investigate the global status, trends, and hotspots of TTE research based on bibliometrics and visualization analysis. Publications related to TTE were retrieved and included in the Web of Science Core Collection. VOSviewer and CiteSpace were used to generate knowledge maps. Six hundred fifty-five publications were identified, and the quantity of the annual publications worldwide was on the increase. International collaboration is a widespread reality. The United States led the world in the field of trachea tissue engineering, whereas University College London was the institution with the greatest contribution. In addition, Biomaterials had a great influence in this field, attracting the largest number of papers. Moreover, the topics of TTE research largely concentrated on the biomechanical scaffold preparation, the vascularization and epithelialization of scaffold, the tracheal cartilage regeneration, and the tissue-engineered tracheal transplantation. And the research on the application of decellularization and 3D printing for the construction of a tissue-engineered trachea was likely to receive more widespread attention in the future. Impact statement In recent years, tracheal tissue engineering (TTE) has experienced rapid growth. In this study, we investigated the worldwide status and trends of TTE research, and revealed the countries, institutions, journals, and authors that had made significant contributions to the field of TTE. Moreover, the possible research hotspots in the future were predicted. According to our research, researchers can gain a better understanding of the trends in this field, and stay informed of the most current research by tracking key journals, institutions, and authors.

Generating human skeletal myoblast spheroids for vascular myogenic tissue engineering

Engineered myogenic microtissues derived from human skeletal myoblasts offer unique opportunities for varying skeletal muscle tissue engineering applications, such asin vitrodrug-testing and disease modelling. However, more complex models require the incorporation of vascular structures, which remains to be challenging. In this study, myogenic spheroids were generated using a high-throughput, non-adhesive micropatterned surface. Since monoculture spheroids containing human skeletal myoblasts were unable to remain their integrity, co-culture spheroids combining human skeletal myoblasts and human adipose-derived stem cells were created. When using the optimal ratio, uniform and viable spheroids with enhanced myogenic properties were achieved. Applying a pre-vascularization strategy, through addition of endothelial cells, resulted in the formation of spheroids containing capillary-like networks, lumina and collagen in the extracellular matrix, whilst retaining myogenicity. Moreover, sprouting of endothelial cells from the spheroids when encapsulated in fibrin was allowed. The possibility of spheroids, from different maturation stages, to assemble into a more large construct was proven by doublet fusion experiments. The relevance of using three-dimensional microtissues with tissue-specific microarchitecture and increased complexity, together with the high-throughput generation approach, makes the generated spheroids a suitable tool forin vitrodrug-testing and human disease modeling.

Tissue Engineering for Penile Reconstruction

The penis is a complex organ with a development cycle from the fetal stage to puberty. In addition, it may suffer from either congenital or acquired anomalies. Penile surgical reconstruction has been the center of interest for many researchers but is still challenging due to the complexity of its anatomy and functionality. In this review, penile anatomy, pathologies, and current treatments are described, including surgical techniques and tissue engineering approaches. The self-assembly technique currently applied is emphasized since it is considered promising for an adequate tissue-engineered penile reconstructed substitute.

Nanomaterials-combined methacrylated gelatin hydrogels (GelMA) for cardiac tissue constructs

Among non-communicable diseases, cardiovascular diseases are the most prevalent, accounting for approximately 17 million deaths per year. Despite conventional treatment, cardiac tissue engineering emerges as a potential alternative for the advancement and treatment of these patients, using biomaterials to replace or repair cardiac tissues. Among these materials, gelatin in its methacrylated form (GelMA) is a biodegradable and biocompatible polymer with adjustable biophysical properties. Furthermore, gelatin has the ability to replace and perform collagen-like functions for cell development in vitro. The interest in using GelMA hydrogels combined with nanomaterials is increasingly growing to promote the responsiveness to external stimuli and improve certain properties of these hydrogels by exploring the incorporation of nanomaterials into these hydrogels to serve as electrical signaling conductive elements. This review highlights the applications of electrically conductive nanomaterials associated with GelMA hydrogels for the development of structures for cardiac tissue engineering, by focusing on studies that report the combination of GelMA with nanomaterials, such as gold and carbon derivatives (carbon nanotubes and graphene), in addition to the possibility of applying these materials in 3D tissue engineering, developing new possibilities for cardiac studies.

Tissue Engineering: Current Technology for Facial Reconstruction

Facial reconstruction is a complex surgical process that requires intricate three-dimensional (3D) concepts for optimal functional and aesthetic outcomes. Conventional reconstruction of structural facial anomalies, such as those including cartilage or bony defects, typically rely on hand-carving autologous constructs harvested from a separate donor site, and shaping that cartilage or bone into a new structural framework. Tissue engineering has emerged in recent decades as a potential approach to mitigate the need for donor site morbidity while improving precision in the design of reconstructive construct. Computer-aided design and computer-aided manufacturing have allowed for a digital 3D workflow to digitally execute the planned reconstruction in virtual space. 3D printing and other manufacturing techniques can then be utilized to create custom-fabricated scaffolds and guides to improve the reconstructive efficiency. Tissue engineering can be paired with custom 3D-manufactured scaffolds to theoretically create an ideal framework for structural reconstruction. In the past decade, there have been several compelling preclinical studies demonstrating the capacity to induce chondrogenesis or osteogenesis in a custom scaffold. However, to date, these preclinical data have not yet translated into significant clinical experience. This translation has been hindered by a lack of consensus on the ideal materials and cellular progenitors to be utilized in these constructs and a lack of regulatory guidance and control to enable clinical application. In this review, we highlight the current state of tissue engineering in facial reconstruction and exciting potential for future applications as the field continues to advance.

Osteoarthritis models: From animals to tissue engineering

Osteoarthritis (OA) is a chronic degenerative osteoarthropathy. Although it has been revealed that a variety of factors can cause or aggravate the symptoms of OA, the pathogenic mechanisms of OA remain unknown. Reliable OA models that accurately reflect human OA disease are crucial for studies on the pathogenic mechanism of OA and therapeutic drug evaluation. This review first demonstrated the importance of OA models by briefly introducing the OA pathological features and the current limitations in the pathogenesis and treatment of OA. Then, it mainly discusses the development of different OA models, including animal and engineered models, highlighting their advantages and disadvantages from the perspective of pathogenesis and pathology analysis. In particular, the state-of-the-art engineered models and their potential were emphasized, as they may represent the future direction in the development of OA models. Finally, the challenges in obtaining reliable OA models are also discussed, and possible future directions are outlined to shed some light on this area.

Preparation of Assemblable Chondral and Subchondral Bone Microtissues for Osteochondral Tissue Engineering

Microtissues exhibit great advantages in injecting with minimum invasiveness, mimicking natural tissues, and promoting tissue regeneration. However, very few studies have focused on the construction of osteochondral microtissues that could simultaneously support hyaline-like cartilage and bone tissue regeneration. In this study, chondral microtissues that could favor the formation of hyaline-like cartilages and subchondral bone microtissues that could repair subchondral defects to support the neo-generated cartilages were successfully constructed for osteochondral tissue engineering. For chondral repair, the developed chondral microgels with high porosity and hydrophilicity could make cells spherical, favor the formation of cell aggregates, and show an excellent differentiation effect toward hyaline-like cartilage, thus contributing to the production of chondral microtissues. For subchondral bone repair, the fabricated subchondral microgels realize cell adhesion and proliferation and support the osteogenic differentiation of stem cells, thus favoring the formation of subchondral bone microtissues. The injectable chondral and subchondral bone microtissues could be stably assembled by Michael addition reaction between sulfhydryl groups of microtissues and double bonds of hydrophilic macromolecular cross-linker. At 12 weeks postimplantation, osteochondral microtissues could support the reconstruction of osteochondral-like tissues. The present study provides new insight into the microtissues for repair of osteochondral tissues.