Current In Vitro Biofilm-Infected Chronic Wound Models for Developing New Treatment Possibilities

Development of a tri-species wound model for studying fungal-bacterial interactions and antimicrobial therapies

Chronic wounds are increasing in numbers and biofilm-producing bacteria are highly prevalent in these wounds and often create resilient polymicrobial infections. Moreover, estimates suggest that up to 23 % of wounds contain fungi, particularly Candida albicans. Currently, inter-kingdom chronic wound models are scarce; thus, this study presents one of the few in vitro models that incorporate both bacterial and fungal species in a wound-relevant environment, addressing a critical gap in current biofilm research. The newly developed model contained the commonly isolated wound bacteria Pseudomonas aeruginosa and Staphylococcus aureus, and the fungus Candida albicans. Inter-species interactions were investigated through selective plate counting and pH and oxygen measurements, as well as confocal microscopy. Investigations were carried out before and after exposure to commonly used clinical antimicrobial treatments, including silver-infused bandages. When grown in a tri-species consortium, P. aeruginosa and S. aureus exhibited a higher tolerance towards silver-infused bandages than when they were grown individually. This suggests that C. albicans plays a protective role for the bacteria. In addition, the treatment also caused a shift in species ratios, moving from a P. aeruginosa-dominated consortium to a S. aureus-dominated consortium. Moreover, confocal microscopy revealed a change in biofilm architecture when comparing single-species models to tri-species models. Finally, we observed that silver-infused bandages increased the pH in the tri-species model as well as partially restoring the oxygenation within the wound model. In conclusion, our novel model exemplifies how inter-kingdom interactions in fungal-bacterial infections can complicate both the microenvironment and treatment efficacy.

3D Printed Human Amnion-Based Bioactive Hybrid Dressings for Effective Management of Complex Infected Wounds

Chronic wounds are often afflicted with persistent infection, excessive exudate accumulation, and delayed healing, leading to prolonged hospitalization. Excess moisture overhydrates the wound, promotes infection, and causes edema. Peri-wound skin may develop rashes, immersion injuries, and epidermal detachment. Nutrient-rich exudates foster microbial growth, increasing the infection risk. High bacterial loads lead to crust formation, continuous leakage, and foul odor, further complicating healing. To address this challenge, we developed a 3D printed amnion-based hybrid dressing comprising a regenerative layer integrated with a laminated silver-embedded polyurethane foam layer for partial and full thickness (thickness 0.12 mm-4 mm) infected wounds and burns. This dressing can suffice the varied clinical requirements of wound management by augmenting tissue regeneration, reducing bacterial load, and managing wound exudate. Human amnion was processed through decellularization and lyopreservation. Key angiogenic growth factors VEGF-A (54.12 ± 2.31 pg/mg) and PDGF-BB (3.760 ± 0.14 pg/mg) were quantified. Long-term in vitro cell viability was assessed for 20 days (as per ISO 10993-5 standards). Bioink was formulated using cryo-milled amnion particles and excipients optimized through rheology. Hybrid dressing was developed using an extrusion-based 3D printer, layering the amnion bioink onto the physical substrate, followed by lyophilization and gamma sterilization. Preclinical efficacy was assessed using a rodent Staphylococcus aureus-infected wound model, comparing the hybrid dressing to an in-house-developed amnion-mupirocin (AM) powder formulation with standard of care dressing. Both treatments demonstrated comparable wound closure rates and a significant bacterial load reduction. However, hybrid dressing offered superior healed tissue quality, increased CD31 expression, and improved neovascularization compared to AM powder treatment with a temporally regulated CD31 expression pattern mirroring the natural healing progression. This can be attributed to the hybrid construct of the dressing that provides effective exudate management, preventing its accumulation that could otherwise hinder angiogenesis, along with replenishment of wound bed with regenerative factors, aiding in mimicking the natural healing cascades.

Sub-Micrometer Polycaprolactone and Polyethylene Glycol-Based Fiber Mats With Iodine and Its Potential for Wound Healing

This study introduces an innovative approach to developing advanced antimicrobial wound dressings by engineering fiber mats of polycaprolactone (PCL) and polycaprolactone/polyethylene glycol (PCL/PEG) loaded with iodine using solution blow spinning (SBS). The mats exhibited a unique morphology, combining fibers and beads, with average fiber diameters of 570 nm for 12% (w/v) PCL and 470 nm for 1% (w/v) PEG in 12% (w/v) PCL, and bead diameters of 11.34 μm and 10.43 μm, respectively. PEG incorporation rendered the mats hydrophilic and significantly enhanced their swelling capacity, which is essential for wound exudate management. Remarkably, iodine was incorporated at a concentration specifically optimized to achieve its minimum inhibitory concentration (MIC) against a range of microorganisms while preserving the structural integrity and release profile of the mats. While PEG facilitated a higher initial iodine release rate, equilibrium was achieved after 5 days. UV-Vis spectroscopy unveiled the formation of transient iodine complexes with both PCL and PEG, underscoring their functional synergy. Biological assays revealed that PCL/PEG mats loaded with 4.26 mg/mL of iodine (PCL/PEG 3MIC) exhibited potent antimicrobial efficacy against gram-positive and gram-negative bacteria, as well as fungi, alongside significant in vitro wound healing potential. These findings underscore the promise of PCL/PEG iodine-loaded mats as an innovative platform for next-generation antimicrobial wound care, combining effective infection control with enhanced wound healing capabilities.

Investigating the Prevalence of Fungi in Diabetic Ulcers: An Under-Recognised Contributor to Polymicrobial Biofilms

Diabetic foot ulcers (DFUs) are common complications for diabetic patients, often exacerbated by complex polymicrobial biofilm infections. While the majority of DFU studies are bacterial focused, fungi have also been identified. This study aims to investigate the prevalence of fungi in DFUs, as well as their potential role and influence on persistence and wound healing. Consecutive DFU swabs were collected from 128 patients (n = 349). Fungal positivity was assessed using enhanced culture and real-time qPCR. Routine microbiology cultures were carried out as part of standard care in the clinics, and their results were then compared to our laboratory investigation. Routine and enhanced culture resulted in similar rates of fungal detection (~9%), whereas qPCR resulted in a higher rate of detection (31%). Notably, the predominant yeast Candida parapsilosis was present in ischaemic and penetrating bone wounds. These findings support existing evidence of fungal presence in DFUs. We demonstrated that routine diagnostic methods are sufficient for fungal detection, but enhanced culture methods allow for more precise fungal identification. Finally, while fungal presence does not appear to impact patient outcomes in our study, their role within these infections remains poorly understood, and further studies are needed to fully understand their relationship to the microbiome.

The Antifungal Activity of a Polygalacturonic and Caprylic Acid Ointment in an In Vitro, Three-Dimensional Wound Biofilm Model

Candida colonization and biofilms are significant contributors to impaired wound healing. Consequently, improved treatments are needed to eradicate Candida biofilms in wounds. Wounds present complex biofilm extracellular matrix environments, with microbial cells frequently enmeshed in matrices comprising wound exudate macromolecular gels. We evaluated the ability of a polygalacturonic and caprylic acid (PG + CAP) ointment to eradicate Candida albicans, C. parapsilosis, C. glabrata, C. tropicalis, and C. auris biofilms in a fibrin gel wound biofilm model of the complex wound biofilm environment. Hypochlorous acid (HOCl) is a disinfecting antimicrobial agent that is widely used as wound irrigant, and this was used as a comparator. A single treatment with PG + CAP reduced the number of viable organisms in the C. albicans and C. glabrata biofilms by over 5 log10, in the C. parapsilosis and C. auris biofilms by over 4 log10, and in the C. tropicalis biofilm by 3.85 log10. PG + CAP was superior (p < 0.01) to HOCl in eradicating all Candida species biofilms, except for C. auris, for which both treatments fully eradicated all viable organisms. The use of HOCl in Candida-colonized wounds should include consideration of the extracellular matrix load in the wound bed. PG + CAP warrants further study in wounds compromised by Candida biofilms.

Global challenges and microbial biofilms: Identification of priority questions in biofilm research, innovation and policy

Priority question exercises are increasingly used to frame and set future research, innovation and development agendas. They can provide an important bridge between the discoveries, data and outputs generated by researchers, and the information required by policy makers and funders. Microbial biofilms present huge scientific, societal and economic opportunities and challenges. In order to identify key priorities that will help to advance the field, here we review questions from a pool submitted by the international biofilm research community and from practitioners working across industry, the environment and medicine. To avoid bias we used computational approaches to group questions and manage a voting and selection process. The outcome of the exercise is a set of 78 unique questions, categorized in six themes: (i) Biofilm control, disruption, prevention, management, treatment (13 questions); (ii) Resistance, persistence, tolerance, role of aggregation, immune interaction, relevance to infection (10 questions); (iii) Model systems, standards, regulatory, policy education, interdisciplinary approaches (15 questions); (iv) Polymicrobial, interactions, ecology, microbiome, phage (13 questions); (v) Clinical focus, chronic infection, detection, diagnostics (13 questions); and (vi) Matrix, lipids, capsule, metabolism, development, physiology, ecology, evolution environment, microbiome, community engineering (14 questions). The questions presented are intended to highlight opportunities, stimulate discussion and provide focus for researchers, funders and policy makers, informing future research, innovation and development strategy for biofilms and microbial communities.

Staphylococcus pseudintermedius and Pseudomonas aeruginosa Lubbock Chronic Wound Biofilm (LCWB): a suitable dual-species model for in vitro studies

Antimicrobial treatment of methicillin-resistant Staphylococcus pseudintermedius associated with canine wounds represents an important challenge. The aim of this study was to create a canine wound infection model, Lubbock Chronic Wound Biofilm (LCWB), with a focus on S. pseudintermedius, drawing inspiration from the established human model involving Staphylococcus aureus. Methicillin-resistant S. pseudintermedius 115 (MRSP) and Pseudomonas aeruginosa 700 strains, isolated from dog wounds, were used to set up the LCWB at 24, 48 and 72 h. The LCWBs were evaluated in terms of volume, weight, and microbial CFU/mg. The microbial spatial distribution in the LCWBs was assessed by SEM and CLSM imaging. The best incubation time for the LCWB production in terms of volume (3.38 cm3 ± 0.13), weight (0.86 gr ± 0.02) and CFU/mg (up to 7.05 × 106 CFU/mg ± 2.89 × 105) was 48 h. The SEM and CLSM images showed a major viable microbial colonization at 48 h with non-mixed bacteria with a prevalence of MRSP on the surface and P. aeruginosa 700 in the depth of the wound. The obtained findings demonstrate the capability of S. pseudintermedius to grow together P. aeruginosa in the LCWB model, representing the suitable model to reproduce the animal chronic wound in vitro.

In vitro models for studying implant-associated biofilms - A review from the perspective of bioengineering 3D microenvironments

Biofilm research has grown exponentially over the last decades, arguably due to their contribution to hospital acquired infections when they form on foreign body surfaces such as catheters and implants. Yet, translation of the knowledge acquired in the laboratory to the clinic has been slow and/or often it is not attempted by research teams to walk the talk of what is defined as 'bench to bedside'. We therefore reviewed the biofilm literature to better understand this gap. Our search revealed substantial development with respect to adapting surfaces and media used in models to mimic the clinical settings, however many of the in vitro models were too simplistic, often discounting the composition and properties of the host microenvironment and overlooking the biofilm-implant-host interactions. Failure to capture the physiological growth conditions of biofilms in vivo results in major differences between lab-grown- and clinically-relevant biofilms, particularly with respect to phenotypic profiles, virulence, and antimicrobial resistance, and they essentially impede bench-to-bedside translatability. In this review, we describe the complexity of the biological processes at the biofilm-implant-host interfaces, discuss the prerequisite for the development and characterization of biofilm models that better mimic the clinical scenario, and propose an interdisciplinary outlook of how to bioengineer biofilms in vitro by converging tissue engineering concepts and tools.

Melaleuca alternifolia essential oil in a natural product-based formulation: Antimicrobial and healing effects in Staphylococcus aureus-infected wounds

Owing to its exposed nature, the skin can be injured by various factors, including by Staphylococcus aureus, which inhabits its innate microbiota. Treatment of infected wounds presents an important challenge, making it imperative to develop new treatment options. Plant-derived formulations, such as those containing Melaleuca alternifolia essential oil (MaEO), are used for wound treatment because of their healing, anti-inflammatory, and antimicrobial properties. This study presents a cream containing 2% MaEO (2% CMa) and evaluates its effects in an S. aureus-infected wound murine model. The 2% CMa was subjected to quality control testing and pH and analysis of density, organoleptic characteristics, and microbiological effects. The quality control parameters all revealed the good stability of the 2% CMa. The formulation strongly reduced the S. aureus ATCC 6538 colony-forming unit (CFU) count in an ex vivo porcine skin model. In the murine model, daily topical application of 2% CMa reduced the severity and size of S. aureus-infected wounds and the bacterial load. These effects may be due to the presence of terpinen-4-ol, which exhibits anti-inflammatory activity. Based on these findings, the formulation exhibits good quality and safety. We suggest the topical application of this formulation, which exhibited an antimicrobial effect, as an interesting treatment strategy for wound healing.

The interplay of Pseudomonas aeruginosa and Staphylococcus aureus in dual-species biofilms impacts development, antibiotic resistance and virulence of biofilms in in vitro wound infection models

Due to high tolerance to antibiotics and pronounced virulence, bacterial biofilms are considered a key factor and major clinical challenge in persistent wound infections. They are typically composed of multiple species, whose interactions determine the biofilm's structural development, functional properties and thus the progression of wound infections. However, most attempts to study bacterial biofilms in vitro solely rely on mono-species populations, since cultivating multi-species biofilms, especially for prolonged periods of time, poses significant challenges. To address this, the present study examined the influence of bacterial composition on structural biofilm development, morphology and spatial organization, as well as antibiotic tolerance and virulence on human skin cells in the context of persistent wound infections. By creating a wound-mimetic microenvironment, the successful cultivation of dual-species biofilms of two of the most prevalent wound pathogens, Pseudomonas aeruginosa and Staphylococcus aureus, was realized over a period of 72 h. Combining quantitative analysis with electron microscopy and label-free imaging enabled a comprehensive evaluation of the dynamics of biofilm formation and matrix secretion, revealing a twofold increased maturation of dual-species biofilms. Antibiotic tolerance was comparable for both mono-species cultures, however, dual-species communities showed a 50% increase in tolerance, mediated by a significantly reduced penetration of the applied antibiotic into the biofilm matrix. Further synergistic effects were observed, where dual-species biofilms exacerbated wound healing beyond the effects observed from either Pseudomonas or Staphylococcus. Consequently, predicting biofilm development, antimicrobial tolerance and virulence for multi-species biofilms based solely on the results from mono-species biofilms is unreliable. This study underscores the substantial impact of a multi-species composition on biofilm functional properties and emphasizes the need to tailor future studies reflecting the bacterial composition of the respective in vivo situation, leading to a more comprehensive understanding of microbial communities in the context of basic microbiology and the development of effective treatments.

Human-Derived collagen hydrogel as an antibiotic vehicle for topical treatment of bacterial biofilms

The complexity of chronic wounds creates difficulty in effective treatments, leading to prolonged care and significant morbidity. Additionally, these wounds are incredibly prone to bacterial biofilm development, further complicating treatment. The current standard treatment of colonized superficial wounds, debridement with intermittent systemic antibiotics, can lead to systemic side-effects and often fails to directly target the bacterial biofilm. Furthermore, standard of care dressings do not directly provide adequate antimicrobial properties. This study aims to assess the capacity of human-derived collagen hydrogel to provide sustained antibiotic release to disrupt bacterial biofilms and decrease bacterial load while maintaining host cell viability and scaffold integrity. Human collagen harvested from flexor tendons underwent processing to yield a gellable liquid, and subsequently was combined with varying concentrations of gentamicin (50-500 mg/L) or clindamycin (10-100 mg/L). The elution kinetics of antibiotics from the hydrogel were analyzed using liquid chromatography-mass spectrometry. The gel was used to topically treat Methicillin-resistant Staphylococcus aureus (MRSA) and Clostridium perfringens in established Kirby-Bauer and Crystal Violet models to assess the efficacy of bacterial inhibition. 2D mammalian cell monolayers were topically treated, and cell death was quantified to assess cytotoxicity. Bacteria-enhanced in vitro scratch assays were treated with antibiotic-embedded hydrogel and imaged over time to assess cell death and mobility. Collagen hydrogel embedded with antibiotics (cHG+abx) demonstrated sustained antibiotic release for up to 48 hours with successful inhibition of both MRSA and C. perfringens biofilms, while remaining bioactive up to 72 hours. Administration of cHG+abx with antibiotic concentrations up to 100X minimum inhibitory concentration was found to be non-toxic and facilitated mammalian cell migration in an in vitro scratch model. Collagen hydrogel is a promising pharmaceutical delivery vehicle that allows for safe, precise bacterial targeting for effective bacterial inhibition in a pro-regenerative scaffold.

Metal-based nanoparticles: an alternative treatment for biofilm infection in hard-to-heal wounds

Metal-based nanoparticles (MNPs) are promoted as effective compounds in the treatment of bacterial infections and as possible alternatives to antibiotics. These MNPs are known to affect a broad spectrum of microorganisms using a multitude of strategies, including the induction of reactive oxygen species and interaction with the inner structures of the bacterial cells. The aim of this review was to summarise the latest studies about the effect of metal-based nanoparticles on pathogenic bacterial biofilm formed in wounds, using the examples of Gram-positive bacterium Staphylococcus aureus and Gram-negative bacterium Pseudomonas aeruginosa, as well as provide an overview of possible clinical applications.

Perspectives on antimicrobial properties of Paulownia tomentosa Steud. fruit products in the control of Staphylococcus aureus infections

ETHNOPHARMACOLOGICAL RELEVANCE

Paulownia tomentosa Steud. (P. tomentosa) is a medium-sized tree traditionally used in Chinese folk medicine for the treatment of infectious diseases. It is a rich source of prenylated phenolic compounds that have been extensively studied for their promising biological activities.

AIM OF THE STUDY

Due to the increasing development of antibiotic resistance, our study investigated plant-derived natural products from the fruits of P. tomentosa that could control Staphylococcus aureus infections with novel targets/modes of action and reduce antimicrobial resistance.

MATERIALS AND METHODS

The ethanolic extract was fractionated and detected by liquid chromatography. The antistaphylococcal effects of the plant formulations were studied in detail in vitro by various biological methods, including microdilution methods for minimum inhibitory concentration (MIC), the checkerboard titration technique for synergy assay, fluorescence measurements for membrane disruption experiments, autoinducer-2-mediated bioassay for quorum sensing inhibition, and counting of colony-forming units for relative adhesion. Morphology was examined by transmission electron microscopy.

RESULTS

Total ethanolic extract and chloroform fraction showed MICs of 128 and 32 μg/mL, respectively. Diplacol, diplacone, and 3'-O-methyl-5'-hydroxydiplacone inhibited S. aureus growth in the range of 8-16 μg/mL. Synergistic potential was shown in combination with mupirocin and fusidic acid. The ethanolic extract and the chloroform fraction destroyed the cell membranes by 91.61% and 79.46%, respectively, while the pure compounds were less active. The ethanolic extract and the pure compounds reduced the number of adhered cells to 47.33-10.26% compared to the untreated control. All tested plant formulations, except diplacone, inhibited quorum sensing of S. aureus. Transmission electron microscopy showed deformation of S. aureus cells.

CONCLUSIONS

The products from the fruit of P. tomentosa showed antimicrobial properties against S. aureus alone and in combination with antibiotics. By affecting intracellular targets, geranylated flavonoids proposed novel approaches in the control of staphylococcal infections.

The chronic wound milieu changes essential oils' antibiofilm activity-an in vitro and larval model study

Essential Oils (EOs) are currently being researched as potential antibiofilm agents to combat infections related to chronic wound biofilms. As documented in the literature, EOs' in vitro antibacterial properties are often assessed using standard microbiological media and conditions that do not accurately reflect the actual environment of a chronic wound. To address this issue, In vitro Wound Milieu (IVWM) medium, which closely resembles the environment of a chronic wound, was applied for culturing S. aureus biofilms (n = 12) in this research. Biofilms cultivated in the standard Tryptic Soy Broth (TSB) medium served as a control for the experiment. Key biofilm features were analyzed and compared. Subsequently, staphylococci were exposed to the activity of thyme or rosemary EOs (T-EO and R-EO, respectively). As proof of concept, the cytotoxicity of T-EO and its antimicrobial in vivo activity were assessed using a G. mellonella larvae model. Key features of biofilm-forming cells were lower in the IVWM than in the TSB medium: biomass (up to 8 times), metabolic activity (up to 9 times), cell number (up to 100 times), and the live/dead cells ratio. Conversely, biofilm thickness was higher (up to 25%) in IVWM. These differences translated into varied responses of the biofilms to EOs exposure. The application of T-EO led to a greater reduction (up to 2 times) in 67% of biofilm-forming strains in IVWM compared to the TSB medium. Conversely, exposure to R-EO resulted in a higher reduction (up to 2.6 times) of 83% of biofilm-forming strains in TSB than in IVWM. The application of T-EO was not only non-toxic to G. mellonella larvae but also increased the survival of larvae infected with staphylococci (from 48 to 85%). Our findings suggest that EOs not only show promise as agents for treating biofilm-related wound infections but also that providing conditions reflecting the specific niche of the human body is of paramount importance in influencing the results obtained. However, before clinical application, challenges related to the methods of assessing their activity, microbial intra-species variability, and different levels of activity of various EOs should be analyzed and standardized.

Biofilm antimicrobial susceptibility testing: where are we and where could we be going?

Our knowledge about the fundamental aspects of biofilm biology, including the mechanisms behind the reduced antimicrobial susceptibility of biofilms, has increased drastically over the last decades. However, this knowledge has so far not been translated into major changes in clinical practice. While the biofilm concept is increasingly on the radar of clinical microbiologists, physicians, and healthcare professionals in general, the standardized tools to study biofilms in the clinical microbiology laboratory are still lacking; one area in which this is particularly obvious is that of antimicrobial susceptibility testing (AST). It is generally accepted that the biofilm lifestyle has a tremendous impact on antibiotic susceptibility, yet AST is typically still carried out with planktonic cells. On top of that, the microenvironment at the site of infection is an important driver for microbial physiology and hence susceptibility; but this is poorly reflected in current AST methods. The goal of this review is to provide an overview of the state of the art concerning biofilm AST and highlight the knowledge gaps in this area. Subsequently, potential ways to improve biofilm-based AST will be discussed. Finally, bottlenecks currently preventing the use of biofilm AST in clinical practice, as well as the steps needed to get past these bottlenecks, will be discussed.

Culture Shock: An Investigation into the Tolerance of Pathogenic Biofilms to Antiseptics in Environments Resembling the Chronic Wound Milieu

Credible assessment methods must be applied to evaluate antiseptics' in vitro activity reliably. Studies indicate that the medium for biofilm culturing should resemble the conditions present at the site of infection. We cultured S. aureus, S. epidermidis, P. aeruginosa, C. albicans, and E. coli biofilms in IVWM (In Vitro Wound Milieu)-the medium reflecting wound milieu-and were compared to the ones cultured in the laboratory microbiological Mueller-Hinton (MH) medium. We analyzed and compared crucial biofilm characteristics and treated microbes with polyhexamethylene biguanide hydrochloride (PHMB), povidone-iodine (PVP-I), and super-oxidized solution with hypochlorites (SOHs). Biofilm biomass of S. aureus and S. epidermidis was higher in IVWM than in MH medium. Microbes cultured in IVWM exhibited greater metabolic activity and thickness than in MH medium. Biofilm of the majority of microbial species was more resistant to PHMB and PVP-I in the IVWM than in the MH medium. P. aeruginosa displayed a two-fold lower MBEC value of PHMB in the IVWM than in the MH medium. PHMB was more effective in the IVWM than in the MH medium against S. aureus biofilm cultured on a biocellulose carrier (instead of polystyrene). The applied improvement of the standard in vitro methodology allows us to predict the effects of treatment of non-healing wounds with specific antiseptics.

In vitro and in vivo evaluation of diethyldithiocarbamate with copper ions and its liposomal formulation for the treatment of Staphylococcus aureus and Staphylococcus epidermidis biofilms

Surgical site infections (SSIs) are mainly caused by Staphylococcus aureus (S. aureus) and Staphylococcus epidermidis (S. epidermidis) biofilms. Biofilms are aggregates of bacteria embedded in a self-produced matrix that offers protection against antibiotics and promotes the spread of antibiotic-resistance in bacteria. Consequently, antibiotic treatment frequently fails, resulting in the need for alternative therapies. The present study describes the in vitro efficacy of the Cu(DDC)₂ complex (2:1 M ratio of diethyldithiocarbamate (DDC^-) and Cu²⁺) with additional Cu²⁺ against S. aureus and S. epidermidis biofilms in models mimicking SSIs and in vitro antibacterial activity of a liposomal Cu(DDC)₂ + Cu²⁺ formulation. The in vitro activity on S. aureus and S. epidermidis biofilms grown on two hernia mesh materials and in a wound model was determined by colony forming unit (CFU) counting. Cu²⁺-liposomes and Cu(DDC)₂-liposomes were prepared, and their antibacterial activity was assessed in vitro using the alamarBlue assay and CFU counting and in vivo using a Galleria mellonella infection model. The combination of 35 μM DDC^- and 128 μM Cu²⁺ inhibited S. aureus and S. epidermidis biofilms on meshes and in a wound infection model. Cu(DDC)₂-liposomes + free Cu²⁺ displayed similar antibiofilm activity to free Cu(DDC)₂ + Cu²⁺, and significantly increased the survival of S. epidermidis-infected larvae. Whilst Cu(DDC)₂ + Cu²⁺ showed substantial antibiofilm activity in vitro against clinically relevant biofilms, its application in mammalian in vivo models is limited by solubility. The liposomal Cu(DDC)₂ + Cu²⁺ formulation showed antibiofilm activity in vitro and antibacterial activity and low toxicity in G. mellonella, making it a suitable water-soluble formulation for future application on infected wounds in animal trials.

A collagen-based layered chronic wound biofilm model for testing antimicrobial wound products

A new in vitro chronic wound biofilm model was recently published, which provided a layered scaffold simulating mammalian tissue composition on which topical wound care products could be tested. In this paper, we updated the model even further to mimic the dynamic influx of nutrients from below as is the case in a chronic wound. The modified in vitro model was created using collagen instead of agar as the main matrix component and contained both Staphylococcus aureus and Pseudomonas aeruginosa. The model was cast in transwell inserts and then placed in wound simulating media, which allowed for an exchange of nutrients and waste products across a filter. Three potential wound care products and chlorhexidine digluconate 2% solution as a positive control were used to evaluate the model. The tested products were composed of hydrogels made from completely biodegradable starch microspheres carrying different active compounds. The compounds were applied topically and left for 2-4 days. Profiles of oxygen concentration and pH were measured to assess the effect of treatments on bacterial activity. Confocal microscope images were obtained of the models to visualise the existence of microcolonies. Results showed that the modified in vitro model maintained a stable number of the two bacterial species over 6 days. In untreated models, steep oxygen gradients developed and pH increased to >8.0. Hydrogels containing active compounds alleviated the high oxygen consumption and decreased pH drastically. Moreover, all three hydrogels reduced the colony forming units significantly and to a larger extent than the chlorhexidine control treatment. Overall, the modified model expressed several characteristics similar to in vivo chronic wounds.

Interspecies interactions in mixed-species biofilms formed by Enterococcus faecalis and gram-negative bacteria isolated from polymicrobial diabetic foot ulcers

Diabetic foot ulcers (DFU) are exacerbated by bacterial colonisation. Here, a high prevalence of Enterococcus faecalis was observed in DFU patients from an Argentinean hospital. E. faecalis was frequently co-isolated with Escherichia coli, Morganella morganii, and Pseudomonas aeruginosa. The effect of interspecies interactions on bacterial growth was investigated in mixed-species macrocolony biofilms developed in Lubbock-Glc-agar. Similar cell counts were found for E. faecalis and M. morganii growing in mixed and single-species biofilms. An E. faecalis strain showed 1 Log higher cell counts in mixed biofilms with E. coli. Remarkably, E. faecalis strains showed 2 to 4 Log higher cell counts in mixed biofilms with P. aeruginosa. This effect was not observed in planktonic growth or biofilms developed in tryptic soy agar. The present findings reveal bacterial interactions that benefit E. faecalis in mixed-species biofilms, mainly with P. aeruginosa, in a medium that partially mimics the nutrients found in DFU.

Development and Characterization of Hydroxyethyl Cellulose-Based Gels Containing Lactobacilli Strains: Evaluation of Antimicrobial Effects in In Vitro and Ex Vivo Models

This study aimed to develop a hydroxyethyl cellulose-based topical formulation containing probiotics and to evaluate its antimicrobial action using in vivo and ex vivo models. Initially, the antagonistic effects of Lacticaseibacillus rhamnosus ATCC 10863, Limosilactobacillus fermentum ATCC 23271, Lactiplantibacillus plantarum ATCC 8014 and Lactiplantibacillus plantarum LP-G18-A11 were analyzed against Enterococcus faecalis ATCC 29212, Klebsiella pneumoniae ATCC 700603, Staphylococcus aureus ATCC 27853 and Pseudomonas aeruginosa ATCC 2785. The best action was seen for L. plantarum LP-G18-A11, which presented high inhibition against S. aureus and P. aeruginosa. Then, lactobacilli strains were incorporated into hydroxyethyl cellulose-based gels (natrosol); however, only the LP-G18-A11-incorporated gels (5% and 3%) showed antimicrobial effects. The LP-G18-A11 gel (5%) maintained its antimicrobial effects and viability up to 14 and 90 days at 25 °C and 4 °C, respectively. In the ex vivo assay using porcine skin, the LP-G18-A11 gel (5%) significantly reduced the skin loads of S. aureus and P. aeruginosa after 24 h, while only P. aeruginosa was reduced after 72 h. Moreover, the LP-G18-A11 gel (5%) showed stability in the preliminary and accelerated assays. Taken together, the results show the antimicrobial potential of L. plantarum LP-G18-A11, which may be applied in the development of new dressings for the treatment of infected wounds.

In Vitro Models of Bacterial Biofilms: Innovative Tools to Improve Understanding and Treatment of Infections

Bacterial infections are a growing concern to the health care systems. Bacteria in the human body are often found embedded in a dense 3D structure, the biofilm, which makes their eradication even more challenging. Indeed, bacteria in biofilm are protected from external hazards and are more prone to develop antibiotic resistance. Moreover, biofilms are highly heterogeneous, with properties dependent on the bacteria species, the anatomic localization, and the nutrient/flow conditions. Therefore, antibiotic screening and testing would strongly benefit from reliable in vitro models of bacterial biofilms. This review article summarizes the main features of biofilms, with particular focus on parameters affecting biofilm composition and mechanical properties. Moreover, a thorough overview of the in vitro biofilm models recently developed is presented, focusing on both traditional and advanced approaches. Static, dynamic, and microcosm models are described, and their main features, advantages, and disadvantages are compared and discussed.

The Use of Proteins, Lipids, and Carbohydrates in the Management of Wounds

Despite the fact that skin has a stronger potential to regenerate than other tissues, wounds have become a serious healthcare issue. Much effort has been focused on developing efficient therapeutical approaches, especially biological ones. This paper presents a comprehensive review on the wound healing process, the classification of wounds, and the particular characteristics of each phase of the repair process. We also highlight characteristics of the normal process and those involved in impaired wound healing, specifically in the case of infected wounds. The treatments discussed here include proteins, lipids, and carbohydrates. Proteins are important actors mediating interactions between cells and between them and the extracellular matrix, which are essential interactions for the healing process. Different strategies involving biopolymers, blends, nanotools, and immobilizing systems have been studied against infected wounds. Lipids of animal, mineral, and mainly vegetable origin have been used in the development of topical biocompatible formulations, since their healing, antimicrobial, and anti-inflammatory properties are interesting for wound healing. Vegetable oils, polymeric films, lipid nanoparticles, and lipid-based drug delivery systems have been reported as promising approaches in managing skin wounds. Carbohydrate-based formulations as blends, hydrogels, and nanocomposites, have also been reported as promising healing, antimicrobial, and modulatory agents for wound management.

A Synthetic Polymicrobial Community Biofilm Model Demonstrates Spatial Partitioning, Tolerance to Antimicrobial Treatment, Reduced Metabolism, and Small Colony Variants Typical of Chronic Wound Biofilms

Understanding chronic wound infection is key for successful treatment and requires accurate laboratory models. We describe a modified biofilm flow device that effectively mimics the chronic wound environment, including simulated wound fluid, a collagen-based 3D biofilm matrix, and a five-species mixture of clinically relevant bacteria (Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli, Enterococcus faecalis, and Citrobacter freundii). Mixed biofilms were cultured for between 3 and 14 days with consistent numbers of bacteria that exhibited reduced metabolic activity, which increased with a high dose of glucose. S. aureus was recovered from biofilms as a small colony variant, but as a normal colony variant if P. aeruginosa was excluded from the system. Bacteria within the biofilm did not co-aggregate but formed discrete, species-specific clusters. Biofilms demonstrated differential tolerance to the topical antimicrobials Neosporin and HOCl, consistent with protection due to the biofilm lifestyle. The characteristics exhibited within this model match those of real-world wound biofilms, reflecting the clinical scenario and yielding a powerful in vitro tool that is versatile, inexpensive, and pivotal for understanding chronic wound infection.

Biofilms in Chronic Wound Infections: Innovative Antimicrobial Approaches Using the In Vitro Lubbock Chronic Wound Biofilm Model

Chronic wounds have harmful effects on both patients and healthcare systems. Wound chronicity is attributed to an impaired healing process due to several host and local factors that affect healing pathways. The resulting ulcers contain a wide variety of microorganisms that are mostly resistant to antimicrobials and possess the ability to form mono/poly-microbial biofilms. The search for new, effective and safe compounds to handle chronic wounds has come a long way throughout the history of medicine, which has included several studies and trials of conventional treatments. Treatments focus on fighting the microbial colonization that develops in the wound by multidrug resistant pathogens. The development of molecular medicine, especially in antibacterial agents, needs an in vitro model similar to the in vivo chronic wound environment to evaluate the efficacy of antimicrobial agents. The Lubbock chronic wound biofilm (LCWB) model is an in vitro model developed to mimic the pathogen colonization and the biofilm formation of a real chronic wound, and it is suitable to screen the antibacterial activity of innovative compounds. In this review, we focused on the characteristics of chronic wound biofilms and the contribution of the LCWB model both to the study of wound poly-microbial biofilms and as a model for novel treatment strategies.

A Thermosensitive, Chitosan-Based Hydrogel as Delivery System for Antibacterial Liposomes to Surgical Site Infections

Prophylaxis and the treatment of surgical site infections (SSIs) with antibiotics frequently fail due to the antibiotic resistance of bacteria and the ability of bacteria to reside in biofilms (i.e., bacterial clusters in a protective matrix). Therefore, alternative antibacterial treatments are required to combat biofilm infections. The combination of diethyldithiocarbamate (DDC^-) and copper ions (Cu²⁺) exhibited antibiofilm activity against the staphylococci species associated with SSIs; however, the formation of a water-insoluble Cu(DDC)₂ complex limits its application to SSIs. Here, we describe the development and antibiofilm activity of an injectable gel containing a liposomal formulation of Cu(DDC)₂ and Cu²⁺ (lipogel). Lyophilized liposomes were incorporated into a mixture of chitosan (CS) and beta-glycerophosphate (βGP), and the thermosensitive gelling properties of CS-βGP and the lipogel were determined. The liposomes remained stable after lyophilization over six months at 4-6 °C and -20 °C. The sol-gel transition of the gel and lipogel occurred between 33 and 39 °C, independently of sterilization or storage at -20 °C. CS-βGP is biocompatible and the liposomes were released over time. The lipogel prevented biofilm formation over 2 days and killed 98.7% of the methicillin-resistant Staphylococcus aureus and 99.9% of the Staphylococcus epidermidis biofilms. Therefore, the lipogel is a promising new prophylaxis and treatment strategy for local application to SSIs.

Adding a new dimension: Multi-level structure and organization of mixed-species Pseudomonas aeruginosa and Staphylococcus aureus biofilms in a 4-D wound microenvironment

Biofilms in wounds typically consist of aggregates of bacteria, most often Pseudomonas aeruginosa and Staphylococcus aureus, in close association with each other and the host microenvironment. Given this, the interplay across host and microbial elements, including the biochemical and nutrient profile of the microenvironment, likely influences the structure and organization of wound biofilms. While clinical studies, in vivo and ex vivo model systems have provided insights into the distribution of P. aeruginosa and S. aureus in wounds, they are limited in their ability to provide a detailed characterization of biofilm structure and organization across the host-microbial interface. On the other hand, biomimetic in vitro systems, such as host cell surfaces and simulant media conditions, albeit reductionist, have been shown to support the co-existence of P. aeruginosa and S. aureus biofilms, with species-dependent localization patterns and interspecies interactions. Therefore, composite in vitro models that bring together key features of the wound microenvironment could provide unprecedented insights into the structure and organization of mixed-species biofilms. We have built a four-dimensional (4-D) wound microenvironment consisting of a 3-D host cell scaffold of co-cultured human epidermal keratinocytes and dermal fibroblasts, and an in vitro wound milieu (IVWM); the IVWM provides the fourth dimension that represents the biochemical and nutrient profile of the wound infection state. We leveraged this 4-D wound microenvironment, in comparison with biofilms in IVWM alone and standard laboratory media, to probe the structure of mixed-species P. aeruginosa and S. aureus biofilms across multiple levels of organization such as aggregate dimensions and biomass thickness, species co-localization and spatial organization within the biomass, overall biomass composition and interspecies interactions. In doing so, the 4-D wound microenvironment platform provides multi-level insights into the structure of mixed-species biofilms, which we incorporate into the current understanding of P. aeruginosa and S. aureus organization in the wound bed.

3D Biofilm Models Containing Multiple Species for Antimicrobial Testing of Wound Dressings

The treatment of chronic wounds presents a major challenge in medical care. In particular, the effective treatment of bacterial infections that occur in the form of biofilms is of crucial importance. To develop successful antibiofilm strategies for chronic wound treatment, biofilm models are needed that resemble the in vivo situation, are easy to handle, standardizable, and where results are readily transferable to the clinical situation. We established two 3D biofilm models to distinguish the effectiveness of wound dressings on important microorganisms present in chronic wounds. The first 3D biofilm model contains Staphylococcus aureus, Escherichia coli, and Acinetobacter baumannii, while the second is based on Pseudomonas aeruginosa. Bacteria are cultivated in a nutrient-rich agar/gelatin mix, into which air bubbles are incorporated. This results in a mature biofilm growing in clusters similar to its organization in chronic wounds. The models are convenient to use, have low variability and are easy to establish in the laboratory. Treatment with polihexanide and silver-containing wound dressings showed that the models are very well suited for antimicrobial testing and that they can detect differences in the efficacy of antimicrobial substances. Therefore, these models present valuable tools in the development of effective antibiofilm strategies in chronic wounds.

The biofilm life cycle: expanding the conceptual model of biofilm formation

Bacterial biofilms are often defined as communities of surface-attached bacteria and are typically depicted with a classic mushroom-shaped structure characteristic of Pseudomonas aeruginosa. However, it has become evident that this is not how all biofilms develop, especially in vivo, in clinical and industrial settings, and in the environment, where biofilms often are observed as non-surface-attached aggregates. In this Review, we describe the origin of the current five-step biofilm development model and why it fails to capture many aspects of bacterial biofilm physiology. We aim to present a simplistic developmental model for biofilm formation that is flexible enough to include all the diverse scenarios and microenvironments where biofilms are formed. With this new expanded, inclusive model, we hereby introduce a common platform for developing an understanding of biofilms and anti-biofilm strategies that can be tailored to the microenvironment under investigation.

Antibiofilm Properties of Antiseptic Agents Used on Pseudomonas aeruginosa Isolated from Diabetic Foot Ulcers

In diabetic foot ulcers (DFUs), biofilm formation is a major challenge that promotes wound chronicity and delays healing. Antiseptics have been proposed to combat biofilms in the management of DFUs. However, there is limited evidence on the activity of these agents against biofilms, and there are questions as to which agents have the best efficiency. Here, we evaluated the antibiofilm activity of sodium hypochlorite, polyvinylpyrrolidoneIodine (PVPI), polyhexamethylenebiguanide (PHMB) and octenidine against Pseudomonas aeruginosa strains using static and dynamic systems in a chronic-wound-like medium (CWM) that mimics the chronic wound environment. Using Antibiofilmogram®, a technology assessing the ability of antiseptics to reduce the initial phase of biofilm formation, we observed the significant activity of antiseptics against biofilm formation by P. aeruginosa (at 1:40 to 1:8 dilutions). Moreover, 1:100 to 1:3 dilutions of the different antiseptics reduced mature biofilms formed after 72 h by 10-log, although higher concentrations were needed in CWM (1:40 to 1:2). Finally, in the BioFlux200TM model, after biofilm debridement, sodium hypochlorite and PHMB were the most effective antiseptics. In conclusion, our study showed that among the four antiseptics tested, sodium hypochlorite demonstrated the best antibiofilm activity against P. aeruginosa biofilms and represents an alternative in the management of DFUs.

Translational challenges and opportunities in biofilm science: a BRIEF for the future

Biofilms are increasingly recognised as a critical global issue in a multitude of industries impacting health, food and water security, marine sector, and industrial processes resulting in estimated economic cost of $5 trillion USD annually. A major barrier to the translation of biofilm science is the gap between industrial practices and academic research across the biofilms field. Therefore, there is an urgent need for biofilm research to notice and react to industrially relevant issues to achieve transferable outputs. Regulatory frameworks necessarily bridge gaps between different players, but require a clear, science-driven non-biased underpinning to successfully translate research. Here we introduce a 2-dimensional framework, termed the Biofilm Research-Industrial Engagement Framework (BRIEF) for classifying existing biofilm technologies according to their level of scientific insight, including the understanding of the underlying biofilm system, and their industrial utility accounting for current industrial practices. We evidence the BRIEF with three case studies of biofilm science across healthcare, food & agriculture, and wastewater sectors highlighting the multifaceted issues around the effective translation of biofilm research. Based on these studies, we introduce some advisory guidelines to enhance the translational impact of future research.

Shockwaves Increase In Vitro Resilience of Rhizopus oryzae Biofilm under Amphotericin B Treatment

Acoustical biophysical therapies, including ultrasound, radial pressure waves, and shockwaves, have been shown to harbor both a destructive and regenerative potential depending on physical treatment parameters. Despite the clinical relevance of fungal biofilms, little work exits comparing the efficacy of these modalities on the destruction of fungal biofilms. This study evaluates the impact of acoustical low-frequency ultrasound, radial pressure waves, and shockwaves on the viability and proliferation of in vitro Rhizopus oryzae biofilm under Amphotericin B induced apoptosis. In addition, the impact of a fibrin substrate in comparison with a traditional polystyrene well-plate one is explored. We found consistent, mechanically promoted increased Amphotericin B efficacy when treating the biofilm in conjunction with low frequency ultrasound and radial pressure waves. In contrast, shockwave induced effects of mechanotransduction results in a stronger resilience of the biofilm, which was evident by a marked increase in cellular viability, and was not observed in the other types of acoustical pressure waves. Our findings suggest that fungal biofilms not only provide another model for mechanistical investigations of the regenerative properties of shockwave therapies, but warrant future investigations into the clinical viability of the therapy.

Polyurethane based hybrid ciprofloxacin-releasing wound dressings designed for skin engineering purpose

PURPOSE

Even in the 21st century, chronic wounds still pose a major challenge due to potentially inappropriate treatment options, so the latest wound dressings are hybrid systems that enable clinical management, such as a hybrid of hydrogels, antibiotics and polymers. These wound dressings are mainly used for chronic and complex wounds, which can easily be infected by bacteria.

MATERIALS AND METHODS

Six Composite Porous Matrices (CPMs) based on polyurethane (PUR) in alliance with polylactide (PLAs) and poly(vinyl alcohol) (PVA) were prepared and analyzed using optical microscopy. Three different types of hydrogels and their Ciprofloxacin (Cipro) modified variants' ratios were prepared and analyzed using FTIR, SEM and EDX techniques. Six Hybrid Cipro-Releasing Hydrogel Wound Dressings (H-CRWDs) were also prepared and underwent short-term degradation, Cipro release, microbiology and cell viability measurements.

RESULTS

Average porosity of CPMs was in the range of 69-81%. The pore size of the obtained CPMs was optimal for skin regeneration. Short-term degradation studies revealed degradability in physiological conditions regardless of sample type. A meaningful release was also observed even in short time (21.76 ​± ​0.64 ​μg/mL after 15 ​min). Microbiological tests showed visible inhibition zones. Cell viability tests proved that the obtained H-CRWDs were biocompatible (over 85% of cells).

CONCLUSIONS

A promising hybrid wound dressing was labeled. Simple and cost-effective methods were used to obtain microbiologically active and biocompatible dressings. The results were of importance for the design and development of acceptable solutions in the management of chronic wounds of high potential for infection.

Clinical Outcome of Postoperative Surgical Site Infection in Patients with Posterior Thoracolumbar and Lumbar Instrumentation

OBJECTIVE

Postoperative surgical site infection (SSI) is associated with greater rates of disability, especially in instrumented spinal surgeries. The management of implant-associated surgical site infections (SSI) is challenging. We analyzed the data from our hospital databases to assess the incidence and characteristics related to postoperative surgical site infection (SSI) after posterior thoracolumbar and lumbar instrumentation.

METHODS

Patient demographics, infection characteristics, details of treatment, and perioperative factors were reviewed (Jan 2010 to Dec 2020). The Oswestry disability index (ODI), Patient Health Questionnaire-9 (PHQ-9), and Visual Analog Scale (VAS) scores for back and leg pain were analyzed preoperatively and postoperatively until last follow-up.

RESULTS

Of the 27,881 procedures collected from the databases, 521 were diagnosed with SSI (1.8%), and 191(36.7%) received at least one revision surgery for SSI. Infection rate was significantly higher in patients with lumbar spinal stenosis than those with scoliosis or kyphosis (P<0.01). Methicillin-sensitive Staphylococcus aureus (43.4%) was the most commonly isolated pathogen. The rate of complication secondary to antibiotics treatment was 7.8%, and long-term antibiotic suppression was reported in 15.2% of patients. Instrumentation was retained in 175 patients (91.6%) and all SSIs were controlled without recurrence during the follow-up.

CONCLUSION

Analysis of 27,881 patients showed an average SSI rate of 1.8%. Patients with deep wound SSI can be successfully treated in most cases with retention of instrumentation. Early diagnosis, positive revision surgery with strict irrigation, thorough debridement, and a long-term course of antibiotics are critical for eradicating infection, retaining implants, decreasing morbidity, and achieving wound healing.

Antimicrobial Combined Action of Graphene Oxide and Light Emitting Diodes for Chronic Wound Management

Innovative non-antibiotic compounds such as graphene oxide (GO) and light-emitting diodes (LEDs) may represent a valid strategy for managing chronic wound infections related to resistant pathogens. This study aimed to evaluate 630 nm LED and 880 nm LED ability to enhance the GO antimicrobial activity against Staphylococcus aureus- and Pseudomonas aeruginosa-resistant strains in a dual-species biofilm in the Lubbock chronic wound biofilm (LCWB) model. The effect of a 630 nm LED, alone or plus 5-aminolevulinic acid (ALAD)-mediated photodynamic therapy (PDT) (ALAD-PDT), or an 880 nm LED on the GO (50 mg/l) action was evaluated by determining the CFU/mg reductions, live/dead analysis, scanning electron microscope observation, and reactive oxygen species assay. Among the LCWBs, the best effect was obtained with GO irradiated with ALAD-PDT, with percentages of CFU/mg reduction up to 78.96% ± 0.21 and 95.17% ± 2.56 for S. aureus and P. aeruginosa, respectively. The microscope images showed a reduction in the cell number and viability when treated with GO + ALAD-PDT. In addition, increased ROS production was detected. No differences were recorded when GO was irradiated with an 880 nm LED versus GO alone. The obtained results suggest that treatment with GO irradiated with ALAD-PDT represents a valid, sustainable strategy to counteract the polymicrobial colonization of chronic wounds.

Complex Chronic Wound Biofilms Are Inhibited in vitro by the Natural Extract of Capparis spinose

Resistant wound microorganisms are becoming an extremely serious challenge in the process of treating infected chronic wounds, leading to impaired healing. Thus, additional approaches should be taken into consideration to improve the healing process. The use of natural extracts can represent a valid alternative to treat/control the microbial infections in wounds. This study investigates the antimicrobial/antivirulence effects of Capparis spinose aqueous extract against the main chronic wound pathogens: Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. The extract shows phenolic characterization with rutin (1.8 ± 0.14 μg/mg) as the major compound and antibacterial effect against bacteria (S. aureus PECHA 10 MIC 6.25%; P. aeruginosa PECHA 4 MIC 12.50%) without action against C. albicans (MIC and MFC ≥ 50%). Capparis spinose also shows a significant antivirulence effect in terms of antimotility/antibiofilm actions. In particular, the extract acts (i) on P. aeruginosa both increasing its swimming and swarming motility favoring the planktonic phenotype and reducing its adhesive capability, (ii) on S. aureus and P. aeruginosa biofilm formation reducing both the biomass and CFU/ml. Furthermore, the extract significantly displays the reduction of a dual-species S. aureus and P. aeruginosa Lubbock chronic wound biofilm, a complex model that mimics the realistic in vivo microbial spatial distribution in wounds. The results suggest that C. spinose aqueous extract could represent an innovative eco-friendly strategy to prevent/control the wound microbial infection.

Assessing the inflammatory response to in vitro polymicrobial wound biofilms in a skin epidermis model

Wounds can commonly become infected with polymicrobial biofilms containing bacterial and fungal microorganisms. Microbial colonization of the wound can interfere with sufficient healing and repair, leading to high rates of chronicity in certain individuals, which can have a huge socioeconomic burden worldwide. One route for alleviating biofilm formation in chronic wounds is sufficient treatment of the infected area with topical wound washes and ointments. Thus, the primary aim here was to create a complex in vitro biofilm model containing a range of microorganisms commonly isolated from the infected wound milieu. These polymicrobial biofilms were treated with three conventional anti-biofilm wound washes, chlorhexidine (CHX), povidone-iodine (PVP-I), and hydrogen peroxide (H₂O₂), and efficacy against the microorganisms assessed using live/dead qPCR. All treatments reduced the viability of the biofilms, although H₂O₂ was found to be the most effective treatment modality. These biofilms were then co-cultured with 3D skin epidermis to assess the inflammatory profile within the tissue. A detailed transcriptional and proteomic profile of the epidermis was gathered following biofilm stimulation. At the transcriptional level, all treatments reduced the expression of inflammatory markers back to baseline (untreated tissue controls). Olink technology revealed a unique proteomic response in the tissue following stimulation with untreated and CHX-treated biofilms. This highlights treatment choice for clinicians could be dictated by how the tissue responds to such biofilm treatment, and not merely how effective the treatment is in killing the biofilm.

Biofilm Survival Strategies in Chronic Wounds

Bacterial biofilms residing in chronic wounds are thought to have numerous survival strategies, making them extremely difficult to eradicate and resulting in long-term infections. However, much of our knowledge regarding biofilm persistence stems from in vitro models and experiments performed in vivo in animal models. While the knowledge obtained from such experiments is highly valuable, its direct translation to the human clinical setting should be undertaken with caution. In this review, we highlight knowledge obtained from human clinical samples in different aspects of biofilm survival strategies. These strategies have been divided into segments of the following attributes: altered transcriptomic profiles, spatial distribution, the production of extracellular polymeric substances, an altered microenvironment, inter-and intra-species interactions, and heterogeneity in the bacterial population. While all these attributes are speculated to contribute to the enhanced persistence of biofilms in chronic wounds, only some of them have been demonstrated to exist in human wounds. Some of the attributes have been observed in other clinical diseases while others have only been observed in vitro. Here, we have strived to clarify the limitations of the current knowledge in regard to this specific topic, without ignoring important in vitro and in vivo observations.

Clinically relevant in vitro biofilm models: A need to mimic and recapitulate the host environment

Biofilm-associated infections are difficult to treat and eradicate because of their increased antimicrobial tolerance. In vitro biofilm models have enabled the high throughput testing of an array of differing novel antimicrobials and treatment strategies. However, biofilms formed in these oftentimes basic in vitro systems do not resemble biofilms seen in vivo. As a result, translatability from the lab to the clinic is poor or limited. To improve translatability, in vitro models must better recapitulate the host environment. This review describes and critically evaluates new and innovative in vitro models that better mimic the environments of a variety of clinically important, biofilm-associated infections of the skin, oropharynx, lungs, and infections related to indwelling implants and medical devices. This review highlights that many of these models represent considerable advances in the field of biofilm research and help to translate laboratory findings into the clinical practice.

Milieu matters: An in vitro wound milieu to recapitulate key features of, and probe new insights into, mixed-species bacterial biofilms

Bacterial biofilms are a major cause of delayed wound healing. Consequently, the study of wound biofilms, particularly in host-relevant conditions, has gained importance. Most in vitro studies employ refined laboratory media to study biofilms, representing conditions that are not relevant to the infection state. To mimic the wound milieu, in vitro biofilm studies often incorporate serum or plasma in growth conditions, or employ clot or matrix-based biofilm models. While incorporating serum or plasma alone is a minimalistic approach, the more complex in vitro wound models are technically demanding, and poorly compatible with standard biofilm assays. Based on previous reports of clinical wound fluid composition, we have developed an in vitro wound milieu (IVWM) that includes, in addition to serum (to recapitulate wound fluid), matrix elements and biochemical factors. With Luria-Bertani broth and Fetal Bovine Serum (FBS) for comparison, the IVWM was used to study planktonic growth, biofilm features, and interspecies interactions, of common wound pathogens, Staphylococcus aureus and Pseudomonas aeruginosa. We demonstrate that the IVWM recapitulates widely reported in vivo biofilm features such as biomass formation, metabolic activity, increased antibiotic tolerance, 3D structure, and interspecies interactions for monospecies and mixed-species biofilms. Further, the IVWM is simple to formulate, uses laboratory-grade components, and is compatible with standard biofilm assays. Given this, it holds potential as a tractable approach to study wound biofilms under host-relevant conditions.

The High Impact of Staphylococcus aureus Biofilm Culture Medium on In Vitro Outcomes of Antimicrobial Activity of Wound Antiseptics and Antibiotic

The staphylococcal biofilm-based infections of wounds still pose a significant therapeutical challenge. Treated improperly, they increase the risk of limb amputation or even death of the patient. The present algorithms of infected wound treatment include, among others, the application of antiseptic substances. In vitro wound biofilm models are applied in order to scrutinize their activity. In the present work, using a spectrum of techniques, we showed how the change of a single variable (medium composition) in the standard in vitro model translates not only to shift in staphylococcal biofilm features but also to the change of efficacy of clinically applied wound antimicrobials such as octenidine, polyhexamethylene biguanide, chlorhexidine, hypochlorite solutions, and locally applied gentamycin. The data presented in this study may be of a pivotal nature, taking into consideration the fact that results of in vitro analyses are frequently used to propagate application of specific antimicrobials in hospitals and ambulatory care units.

The impact of mental models on the treatment and research of chronic infections due to biofilms

Research on biofilms is predominantly made in in vitro contexts. However, in vivo observation of biofilms in human chronic infections shows distinct differences compared to in vitro biofilm growth. This could imply the use of an inadequate mental model both in research and healthcare practices. Drawing on knowledge from the cognitive sciences, we hypothesise that the predominance of in vitro research on biofilms is skewed towards a mental model promoting wrong inferences for researchers and healthcare professionals (HCPs) in the in vivo context. To explore the prevalence of such a mental model, we carried out a qualitative image analysis in which biofilm illustrations from a Google image search were coded for typical in vitro or in vivo characteristics. Further, to investigate potential misinformed and unhelpful clinical interventions related to biofilms, we conducted a quantitative questionnaire among HCPs. The questions were designed to test whether knowledge about in vitro biofilms was used in an in vivo context. This questionnaire was analysed through a chi-squared test. Most biofilm illustrations were consistent with the in vitro model. A statistical analysis of survey responses revealed that HCPs have adequate knowledge about biofilm but often respond incorrectly when asked to apply their knowledge to in vivo contexts. The outcome of this research points to a prevalent and consolidated mental model derived from in vitro observations. This model has likely been made dominant by HCPs' frequent exposure to visual depictions in articles and presentations. The prevalence of the in vitro model sets up the possibility of erroneous claims when the in vitro model is inadequately applied to in vivo contexts. This has potential implications for HCPs working in fields involving biofilm, such as wound care treatment.

A novel chronic wound biofilm model sustaining coexistence of Pseudomonas aeruginosa and Staphylococcus aureus suitable for testing of antibiofilm effect of antimicrobial solutions and wound dressings

Chronic wounds are a large burden to patients and healthcare systems. Biofilm infections in chronic wounds are crucial factors leading to non‐healing of wounds. It is important to study biofilm in wounds and to develop effective interventions against wound biofilm. This study presents a novel in vitro biofilm model mimicking infected chronic wounds. The novel layered chronic wound biofilm model uses woundlike media and includes both Pseudomonas aeruginosa and Staphylococcus aureus, which have been identified as the most important pathogens in wounds. The model sustains their coexistence for at least 96 h. Microscopy of the model revealed microbial growth in non‐surface attached microcolonies as previously observed in vivo. The model was used to determine log₁₀‐reduction for the use of an antimicrobial solution and antimicrobial dressings (containing silver or honey) showing moderate‐to‐low antibiofilm effect, which indicates better concordance with the observed clinical performance of this type of treatment than other widely used standard tests.

Novel treatment dynamics for biofilm-related infections

Introduction: As a result of progress in medical care, a huge number of medical devices are used in the treatment of human diseases. In turn, biofilm-related infection has become a growing threat due to the tolerance of biofilms to antimicrobials, a problem magnified by the development of antimicrobial resistance worldwide. As a result, successful treatment of biofilm-disease using only antimicrobials is problematic.Areas covered: We summarize some alternative approaches to classic antimicrobials for the treatment of biofilm disease. This review is not intended to be exhaustive but to give a clinical picture of alternatives to antimicrobial agents to manage biofilm disease. We highlight those strategies that may be closer to application in clinical practice.Expert opinion: There are a number of outstanding challenges in the development of novel antibiofilm therapies. Screening for effective antibiofilm compounds requires models relevant to all clinical scenarios. Although in vitro research of anti-biofilm strategies has progressed significantly over the past decade, there is a lack of in vivo research. In addition, the complexity of biofilm biology makes it difficult to develop a compound that is likely to provide the single 'magic bullet'. The multifaceted nature of biofilms imposes the need for multi-targeted or combinatorial therapies.

Thriving Under Stress: Pseudomonas aeruginosa Outcompetes the Background Polymicrobial Community Under Treatment Conditions in a Novel Chronic Wound Model

In vitro infection models are important for studying the effects of antimicrobials on microbial growth and metabolism. However, many models lack important biological components that resemble the polymicrobial nature of chronic wounds or infections. In this study, we developed a perfused meat model that supports the growth of the human pathogen Pseudomonas aeruginosa in a native meat microbial background to investigate the impact of antibiotics and hydrogen peroxide on polymicrobial community growth and metabolism. P. aeruginosa plays an important role as an etiological agent involved in chronic infections and is a common opportunistic pathogen. Chemical stressors in the form of hydrogen peroxide, carbenicillin, and gentamicin were perfused through the meat with polymicrobial growth on the surface. The relative abundances of P. aeruginosa and the background microbial community were analyzed by cell viability assays, and metabolic changes of the entire community in response to different antimicrobial treatments were characterized by GC-MS analysis of volatile organic compounds. The meat background community was characterized by amplicon sequencing. Relative densities of P. aeruginosa and background microbiota were similar under control conditions. Antimicrobial stressors, even at sub-inhibitory, physiologically relevant concentrations, spurred P. aeruginosa dominance of the meat surface community. Volatile metabolite ion intensity levels showed that antibacterial treatments drive changes in microbial metabolism. The abundance of the P. aeruginosa-derived metabolite, acetophenone, remained stable with treatment, whereas the relative abundances of 2-butanone, 2-nonanone, and 2-aminoacetophenone changed in response to treatment, suggesting these could serve as biomarkers of infection. Our model recapitulates some of the physiological conditions of chronic wounds and facilitates high throughput experiments without the high cost of in vivo models. Expanded use of this perfusion model will contribute to the understanding of polymicrobial growth and metabolism in the context of chronic wounds and infections.

The Novel Quantitative Assay for Measuring the Antibiofilm Activity of Volatile Compounds (AntiBioVol)

Herein, we present a new test, dubbed AntiBioVol, to be used for the quantitative evaluation of antibiofilm activity of volatile compounds in vitro. AntiBioVol is performed in two 24-well plates using a basic microbiological laboratory equipment. To demonstrate AntiBioVol usability, we have scrutinized the activity of volatilized eucalyptus, tea tree, thyme essential oils, and ethanol (used for method suitability testing) against biofilms of Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. We have also compared AntiBioVol with the standard disc volatilization method, placing a special stress on evaluating the impact of various technical parameters on the outcomes of the latter method. The obtained results indicate that AntiBioVol allows analyzing the antibiofilm activity of volatile compounds in a high number of repeats and provides semi-quantitative or quantitative results of high repeatability. In comparison to disc volatilization, AntiBioVol is a more space- and cost-effective method that allows analyzing various types of microbial aggregates. Moreover, we have indicated that the possible reasons for the discrepancies in the results obtained by means of the standard disc volatilization method may be related to various parameters of the testing dishes used (height, volume, diameter) and to various volumes of the agar medium applied. In turn, the application of a 24-well plate and a strictly defined AntiBioVol protocol provide a higher control of experimental conditions. Therefore, the application of AntiBioVol may enable an optimization of and introduction of volatile compounds to the fight against infective biofilms.