Localization of fission yeast type II myosin, Myo2, to the cytokinetic actin ring is regulated by phosphorylation of a C-terminal coiled-coil domain and requires a functional septation initiation network

The Roles of Septins in Regulating Fission Yeast Cytokinesis

Cytokinesis is required to separate two daughter cells at the end of mitosis, and septins play crucial roles in many aspects of cytokinesis. While septins have been intensively studied in many model organisms, including the budding yeast Saccharomyces cerevisiae, septins have been relatively less characterized in the fission yeast Schizosaccharomyces pombe, which has proven to be an excellent model organism for studying fundamental cell biology. In this review, we summarize the findings of septins made in fission yeasts mainly from four aspects: the domain structure of septins, the localization of septins during the cell cycle, the roles of septins in regulating cytokinesis, and the regulatory proteins of septins.

The Scaffold Proteins Paxillin B and α-Actinin Regulate Septation in Aspergillus nidulans via Control of Actin Ring Contraction

Cytokinesis, as the final step of cell division, plays an important role in fungal growth and proliferation. In the filamentous fungus Aspergillus nidulans, defective cytokinesis is able to induce abnormal multinuclear or nonnucleated cells and then result in reduced hyphal growth and abolished sporulation. Previous studies have reported that a conserved contractile actin ring (CAR) protein complex and the septation initiation network (SIN) signaling kinase cascade are required for cytokinesis and septation; however, little is known about the role(s) of scaffold proteins involved in these two important cellular processes. In this study, we show that a septum-localized scaffold protein paxillin B (PaxB) is essential for cytokinesis/septation in A. nidulans The septation defects observed in a paxB deletion strain resemble those caused by the absence of another identified scaffold protein, α-actinin (AcnA). Deletion of α-actinin (AcnA) leads to undetectable PaxB at the septation site, whereas deletion of paxB does not affect the localization of α-actinin at septa. However, deletion of either α-actinin (acnA) or paxB causes the actin ring to disappear at septation sites during cytokinesis. Notably, overexpression of α-actinin acnA partially rescues the septum defects of the paxB mutant but not vice versa, suggesting AcnA may play a dominant role over that of PaxB for cytokinesis and septation. In addition, PaxB and α-actinin affect the septal dynamic localization of MobA, a conserved component of the SIN pathway, suggesting they may affect the SIN protein complex function at septa. Protein pull-down assays combined with liquid chromatography-mass spectrometry identification indicate that α-actinin AcnA and PaxB likely do not directly interact, but presumably belong to an actin cytoskeleton protein network that is required for the assembly and contraction of the CAR. Taken together, findings in this study provide novel insights into the roles of conserved scaffold proteins during fungal septation in A. nidulans.

Involvement of the septation initiation network in events during cytokinesis in fission yeast

The septation initiation network (SIN), comprising a GTPase and a cascade of three protein kinases, regulates cell division in fission yeast Schizosaccharomyces pombe, but questions remain about its influence on cytokinesis. Here, we made quantitative measurements of the numbers of Cdc7p kinase molecules (a marker for SIN activity) on spindle pole bodies (SPBs), and on the timing of assembly, maturation and constriction of contractile rings via six different proteins tagged with fluorescent proteins. When SIN activity is low in spg1-106 mutant cells at 32°C, cytokinetic nodes formed contractile rings ∼3 min slower than wild-type cells. During the maturation period, these rings maintained normal levels of the myosin-II mEGFP-Myo2p but accumulated less of the F-BAR protein Cdc15p-GFP than in wild-type cells. The Cdc15p-GFP fluorescence then disintegrated into spots as mEGFP-Myo2p dissociated slowly. Some rings started to constrict at the normal time, but most failed to complete constriction. When high SIN activity persists far longer than normal on both SPBs in cdc16-116 mutant cells at 32°C, contractile rings assembled and constricted normally, but disassembled slowly, delaying cell separation.

Septins regulate the equatorial dynamics of the separation initiation network kinase Sid2p and glucan synthases to ensure proper cytokinesis

Septins generally function as scaffolds and as cortical barriers to restrict the diffusion of membrane proteins. In the fission yeast Schizosaccharomyces pombe, septins form a ring structure at the septum after spindle breakdown during the constriction of the contractile actomyosin ring (CAR) and serve as a scaffold to recruit glucanases to mediate ultimate daughter cell separation. Despite this, it remains unclear if septins play any significant roles before the cell separation during cytokinesis. Employing live cell microscopy, we carefully examined SIN (Septation Initiation Network) signaling and glucan synthases, two key factors ensuring proper function of the CAR. In the absence of the core septin component Spn1p, the formation of a compact CAR is advanced and the CAR constriction rate is slightly but significantly decreased. Moreover, the SIN kinase Sid2p and the glucan synthases Bgs1p and Ags1p form an equatorial ring quite prematurely, but their maintenance at the equatorial region is diminished spn1Δ cells. These findings suggest that septins act as key players in an accurate establishment and the maintenance of CAR by orchestrating the equatorial dynamics of Sid2p and glucan synthases. Hence, this work demonstrates that, in addition to their function during ultimate cell septation, septins have important roles in regulating earlier cytokinetic events, including CAR assembly and constriction, SIN signaling, and the cortical dynamics of the glucan synthases.

Fission yeast myosin Myo2 is down-regulated in actin affinity by light chain phosphorylation

Studies in fission yeast Schizosaccharomyces pombe have provided the basis for the most advanced models of the dynamics of the cytokinetic contractile ring. Myo2, a class-II myosin, is the major source of tension in the contractile ring, but how Myo2 is anchored and regulated to produce force is poorly understood. To enable more detailed biochemical/biophysical studies, Myo2 was expressed in the baculovirus/Sf9 insect cell system with its two native light chains, Rlc1 and Cdc4. Milligram yields of soluble, unphosphorylated Myo2 were obtained that exhibited high actin-activated ATPase activity and in vitro actin filament motility. The fission yeast specific chaperone Rng3 was thus not required for expression or activity. In contrast to nonmuscle myosins from animal cells that require phosphorylation of the regulatory light chain for activation, phosphorylation of Rlc1 markedly reduced the affinity of Myo2 for actin. Another unusual feature of Myo2 was that, unlike class-II myosins, which generally form bipolar filamentous structures, Myo2 showed no inclination to self-assemble at approximately physiological salt concentrations, as analyzed by sedimentation velocity ultracentrifugation. This lack of assembly supports the hypothesis that clusters of Myo2 depend on interactions at the cell cortex in structural units called nodes for force production during cytokinesis.

Formins determine the functional properties of actin filaments in yeast

The actin cytoskeleton executes a broad range of essential functions within a living cell. The dynamic nature of the actin polymer is modulated to facilitate specific cellular processes at discrete locations by actin-binding proteins (ABPs), including the formins and tropomyosins (Tms). Formins nucleate actin polymers, while Tms are conserved dimeric proteins that form polymers along the length of actin filaments. Cells possess different Tm isoforms, each capable of differentially regulating the dynamic and functional properties of the actin polymer. However, the mechanism by which a particular Tm localizes to a specific actin polymer is unknown. Here we show that specific formin family members dictate which Tm isoform will associate with a particular actin filament to modulate its dynamic and functional properties at specific cellular locations. Exchanging the localization of the fission yeast formins For3 and Cdc12 results in an exchange in localizations of Tm forms on actin polymers. This nucleator-driven switch in filament composition is reflected in a switch in actin dynamics, together with a corresponding change in the filament's ability to regulate ABPs and myosin motor activity. These data establish a role for formins in dictating which specific Tm variant will associate with a growing actin filament and therefore specify the functional capacity of the actin filaments that they create.

Regulation and function of the fission yeast myosins

It is now quarter of a century since the actin cytoskeleton was first described in the fission yeast, Schizosaccharomyces pombe. Since then, a substantial body of research has been undertaken on this tractable model organism, extending our knowledge of the organisation and function of the actomyosin cytoskeleton in fission yeast and eukaryotes in general. Yeast represents one of the simplest eukaryotic model systems that has been characterised to date, and its genome encodes genes for homologues of the majority of actin regulators and actin-binding proteins found in metazoan cells. The ease with which diverse methodologies can be used, together with the small number of myosins, makes fission yeast an attractive model system for actomyosin research and provides the opportunity to fully understand the biochemical and functional characteristics of all myosins within a single cell type. In this Commentary, we examine the differences between the five S. pombe myosins, and focus on how these reflect the diversity of their functions. We go on to examine the role that the actin cytoskeleton plays in regulating the myosin motor activity and function, and finally explore how research in this simple unicellular organism is providing insights into the substantial impacts these motors can have on development and viability in multicellular higher-order eukaryotes.

Assembly and architecture of precursor nodes during fission yeast cytokinesis

Mapping of fission yeast precursor node interaction modules and assembly reveals important steps in contractile ring assembly.

The contractile ring is essential for cytokinesis in most fungal and animal cells. In fission yeast, cytokinesis nodes are precursors of the contractile ring and mark the future cleavage site. However, their assembly and architecture have not been well described. We found that nodes are assembled stoichiometrically in a hierarchical order with two modules linked by the positional marker anillin Mid1. Mid1 first recruits Cdc4 and IQGAP Rng2 to form module I. Rng2 subsequently recruits the myosin-II subunits Myo2 and Rlc1. Mid1 then independently recruits the F-BAR protein Cdc15 to form module II. Mid1, Rng2, Cdc4, and Cdc15 are stable node components that accumulate close to the plasma membrane. Both modules recruit the formin Cdc12 to nucleate actin filaments. Myo2 heads point into the cell interior, where they efficiently capture actin filaments to condense nodes into the contractile ring. Collectively, our work characterizing the assembly and architecture of precursor nodes defines important steps and molecular players for contractile ring assembly.

Dividing the spoils of growth and the cell cycle: The fission yeast as a model for the study of cytokinesis

Cytokinesis is the final stage of the cell cycle, and ensures completion of both genome segregation and organelle distribution to the daughter cells. Cytokinesis requires the cell to solve a spatial problem (to divide in the correct place, orthogonally to the plane of chromosome segregation) and a temporal problem (to coordinate cytokinesis with mitosis). Defects in the spatiotemporal control of cytokinesis may cause cell death, or increase the risk of tumor formation [Fujiwara et al., 2005 (Fujiwara T, Bandi M, Nitta M, Ivanova EV, Bronson RT, Pellman D. 2005. Cytokinesis failure generating tetraploids promotes tumorigenesis in p53-null cells. Nature 437:1043–1047); reviewed by Ganem et al., 2007 (Ganem NJ, Storchova Z, Pellman D. 2007. Tetraploidy, aneuploidy and cancer. Curr Opin Genet Dev 17:157–162.)]. Asymmetric cytokinesis, which permits the generation of two daughter cells that differ in their shape, size and properties, is important both during development, and for cellular homeostasis in multicellular organisms [reviewed by Li, 2007 (Li R. 2007. Cytokinesis in development and disease: variations on a common theme. Cell Mol Life Sci 64:3044–3058)]. The principal focus of this review will be the mechanisms of cytokinesis in the mitotic cycle of the yeast Schizosaccharomyces pombe. This simple model has contributed significantly to our understanding of how the cell cycle is regulated, and serves as an excellent model for studying aspects of cytokinesis. Here we will discuss the state of our knowledge of how the contractile ring is assembled and disassembled, how it contracts, and what we know of the regulatory mechanisms that control these events and assure their coordination with chromosome segregation.

The fungal type II myosin in Penicillium marneffei, MyoB, is essential for chitin deposition at nascent septation sites but not actin localization

Cytokinesis is essential for proliferative growth but also plays equally important roles during morphogenesis and development. The human pathogen Penicillium marneffei is capable of dimorphic switching in response to temperature, growing in a multicellular filamentous hyphal form at 25°C and in a unicellular yeast form at 37°C. P. marneffei also undergoes asexual development at 25°C to produce multicellular differentiated conidiophores. Thus, P. marneffei exhibits cell division with and without cytokinesis and division by budding and fission, depending on the cell type. The type II myosin gene, myoB, from P. marneffei plays important roles in the morphogenesis of these cell types. Deletion of myoB leads to chitin deposition defects at sites of cell division without perturbing actin localization. In addition to aberrant hyphal cells, distinct conidiophore cell types are lacking due to malformed septa and nuclear division defects. At 37°C, deletion of myoB prevents uninucleate yeast cell formation, instead producing long filaments resembling hyphae at 25°C. The ΔmyoB cells also often lyse due to defects in cell wall biogenesis. Thus, MyoB is essential for correct morphogenesis of all cell types regardless of division mode (budding or fission) and defines differences between the different types of growth.

Dephosphorylation of F-BAR protein Cdc15 modulates its conformation and stimulates its scaffolding activity at the cell division site

Cytokinesis in Schizosaccharomyces pombe requires the function of Cdc15, the founding member of the pombe cdc15 homology (PCH) family of proteins. As an early, abundant contractile ring component with multiple binding partners, Cdc15 plays a key role in organizing the ring. We demonstrate that Cdc15 phosphorylation at many sites generates a closed conformation, inhibits Cdc15 assembly at the division site in interphase, and precludes interaction of Cdc15 with its binding partners. Cdc15 dephosphorylation induces an open conformation, oligomerization, and scaffolding activity during mitosis. Cdc15 mutants with reduced phosphorylation precociously appear at the division site in filament-like structures and display increased association with protein partners and the membrane. Our results indicate that Cdc15 phosphoregulation impels both assembly and disassembly of the contractile apparatus and suggest a regulatory strategy that PCH family and BAR superfamily members might broadly employ to achieve temporal specificity in their roles as linkers between membrane and cytoskeleton.

Ase1/Prc1-dependent spindle elongation corrects merotely during anaphase in fission yeast

The tug of war that ensues when a kinetochore binds microtubules from both spindle poles is resolved by Ase1/Prc1.

Faithful segregation of sister chromatids requires the attachment of each kinetochore (Kt) to microtubules (MTs) that extend from opposite spindle poles. Merotelic Kt orientation is a Kt–MT misattachment in which a single Kt binds MTs from both spindle poles rather than just one. Genetic induction of merotelic Kt attachment during anaphase in fission yeast resulted in intra-Kt stretching followed by either correction or Kt disruption. Laser ablation of spindle MTs revealed that intra-Kt stretching and merotelic correction were dependent on MT forces. The presence of multiple merotelic chromosomes linearly antagonized the spindle elongation rate, and this phenomenon could be solved numerically using a simple force balance model. Based on the predictions of our mechanical model, we provide in vivo evidence that correction of merotelic attachment in anaphase is tension dependent and requires an Ase1/Prc1-dependent mechanism that prevents spindle collapse and thus asymmetric division and/or the appearance of the cut phenotype.

Regulation of fission yeast myosin-II function and contractile ring dynamics by regulatory light-chain and heavy-chain phosphorylation

We investigated the role of regulatory light-chain (Rlc1p) and heavy-chain phosphorylation in controlling fission yeast myosin-II (Myo2p) motor activity and function during cytokinesis. Phosphorylation of Rlc1p leads to a fourfold increase in Myo2p's in vitro motility rate, which ensures effective contractile ring constriction and function. Surprisingly, unlike with smooth muscle and nonmuscle myosin-II, RLC phosphorylation does not influence the actin-activated ATPase activity of Myo2p. A truncated form of Rlc1p lacking its extended N-terminal regulatory region (including phosphorylation sites) supported maximal Myo2p in vitro motility rates and normal contractile ring function. Thus, the unphosphorylated N-terminal extension of Rlc1p can uncouple the ATPase and motility activities of Myo2p. We confirmed the identity of one out of two putative heavy-chain phosphorylation sites previously reported to control Myo2p function and cytokinesis. Although in vitro studies indicated that phosphorylation at Ser-1444 is not needed for Myo2p motor activity, phosphorylation at this site promotes the initiation of contractile ring constriction.

Stepping into the ring: the SIN takes on contractile ring assembly

The septation initiation network (SIN) regulates the timing of septum formation in Schizosaccharomyces pombe. However, whether and how the SIN functions in contractile ring formation has remained unclear. In this issue of Genes & Development, Hachet and Simanis (3205-3216) demonstrate that the SIN acts downstream from the Plo1 kinase to control a final step in contractile ring assembly. Furthermore, their careful analysis of contractile ring formation may help bridge two existing models of cytokinetic ring formation.

Dynein participates in chromosome segregation in fission yeast

BACKGROUND INFORMATION

In eukaryotic cells, proper formation of the spindle is necessary for successful cell division. For faithful segregation of sister chromatids, each sister kinetochore must attach to microtubules that extend to opposite poles (chromosome bi-orientation). At the metaphase-anaphase transition, cohesion between sister chromatids is removed, and each sister chromatid is pulled to opposite poles of the cell by microtubule-dependent forces.

RESULTS

We have studied the role of the minus-end-directed motor protein dynein by analysing kinetochore dynamics in fission yeast cells deleted for the dynein heavy chain (Dhc1) or the light chain (Dlc1). In these mutants, we found an increased frequency of cells showing defects in chromosome segregation, which leads to the appearance of lagging chromosomes and an increased rate of chromosome loss. By following simultaneously kinetochore dynamics and localization of the checkpoint protein Mad2, we provide evidence that dynein function is not necessary for spindle-assembly checkpoint inactivation. Instead, we have demonstrated that loss of dynein function alters chromosome segregation and activates the Mad2-dependent spindle-assembly checkpoint.

CONCLUSIONS

These results show an unexpected role for dynein in the control of chromosome segregation in fission yeast, most probably operating during the process of bi-orientation during early mitosis.

Characterization of the minimum domain required for targeting budding yeast myosin II to the site of cell division

BACKGROUND

All eukaryotes with the exception of plants use an actomyosin ring to generate a constriction force at the site of cell division (cleavage furrow) during mitosis and meiosis. The structure and filament forming abilities located in the C-terminal or tail region of one of the main components, myosin II, are important for localising the molecule to the contractile ring (CR) during cytokinesis. However, it remains poorly understood how myosin II is recruited to the site of cell division and how this recruitment relates to myosin filament assembly. Significant conservation between species of the components involved in cytokinesis, including those of the CR, allows the use of easily genetically manipulated organisms, such as budding yeast (Saccharomyces cerevisiae), in the study of cytokinesis. Budding yeast has a single myosin II protein, named Myo1. Unlike most other class II myosins, the tail of Myo1 has an irregular coiled coil. In this report we use molecular genetics, biochemistry and live cell imaging to characterize the minimum localisation domain (MLD) of budding yeast Myo1.

RESULTS

We show that the MLD is a small region in the centre of the tail of Myo1 and that it is both necessary and sufficient for localisation of Myo1 to the yeast bud neck, the pre-determined site of cell division. Hydrodynamic measurements of the MLD, purified from bacteria or yeast, show that it is likely to exist as a trimer. We also examine the importance of a small region of low coiled coil forming probability within the MLD, which we call the hinge region. Removal of the hinge region prevents contraction of the CR. Using fluorescence recovery after photobleaching (FRAP), we show that GFP-tagged MLD is slightly more dynamic than the GFP-tagged full length molecule but less dynamic than the GFP-tagged Myo1 construct lacking the hinge region.

CONCLUSION

Our results define the intrinsic determinant for the localization of budding yeast myosin II and show it to be an oligomer of tentatively 3 monomers. We suggest that this is the minimum oligomeric unit (rather than the traditional myosin II dimer) that would allow specific assembly to the site of cytokinesis in a manner similar to the full length molecule. The flexible hinge region also contributes to CR structural integrity and contractility.

Cytokinesis depends on the motor domains of myosin-II in fission yeast but not in budding yeast

Budding yeast possesses one myosin-II, Myo1p, whereas fission yeast has two, Myo2p and Myp2p, all of which contribute to cytokinesis. We find that chimeras consisting of Myo2p or Myp2p motor domains fused to the tail of Myo1p are fully functional in supporting budding yeast cytokinesis. Remarkably, the tail alone of budding yeast Myo1p localizes to the contractile ring, supporting both its constriction and cytokinesis. In contrast, fission yeast Myo2p and Myp2p require both the catalytic head domain as well as tail domains for function, with the tails providing distinct functions (Bezanilla and Pollard, 2000). Myo1p is the first example of a myosin whose cellular function does not require a catalytic motor domain revealing a novel mechanism of action for budding yeast myosin-II independent of actin binding and ATPase activity.

Myosin-II reorganization during mitosis is controlled temporally by its dephosphorylation and spatially by Mid1 in fission yeast

Cytokinesis in many eukaryotes requires an actomyosin contractile ring. Here, we show that in fission yeast the myosin-II heavy chain Myo2 initially accumulates at the division site via its COOH-terminal 134 amino acids independently of F-actin. The COOH-terminal region can access to the division site at early G2, whereas intact Myo2 does so at early mitosis. Ser1444 in the Myo2 COOH-terminal region is a phosphorylation site that is dephosphorylated during early mitosis. Myo2 S1444A prematurely accumulates at the future division site and promotes formation of an F-actin ring even during interphase. The accumulation of Myo2 requires the anillin homologue Mid1 that functions in proper ring placement. Myo2 interacts with Mid1 in cell lysates, and this interaction is inhibited by an S1444D mutation in Myo2. Our results suggest that dephosphorylation of Myo2 liberates the COOH-terminal region from an intramolecular inhibition. Subsequently, dephosphorylated Myo2 is anchored by Mid1 at the medial cortex and promotes the ring assembly in cooperation with F-actin.

Events at the end of mitosis in the budding and fission yeasts

The mitotic exit network (MEN) and the septation initiation network (SIN) control events at the end of mitosis in S. cerevisiae and S. pombe, respectively. SIN initiates contraction of the actin ring and synthesis of the division septum, thereby bringing about cytokinesis. The MEN is also required for cytokinesis, but its main role is to control inactivation of mitotic cyclin-dependent kinases (CDKs) at the end of mitosis, and thereby regulate mitotic exit. Each revolves around a Ras-family GTPase and involves several protein kinases, and SIN and MEN proteins are localised to the spindle pole body. In S. cerevisiae, a second network, known as FEAR, cooperates with the MEN to bring about mitotic exit, and a third, AMEN, contributes to switching the MEN off. Some of the central components of the FEAR, SIN and MEN have been conserved through evolution, which suggests that aspects of their function in controlling events at the end of mitosis might be conserved in higher eukaryotes.

Mechanism controlling perpendicular alignment of the spindle to the axis of cell division in fission yeast

In animal cells, the mitotic spindle is aligned perpendicular to the axis of cell division. This ensures that sister chromatids are separated to opposite sides of the cytokinetic actomyosin ring (CAR). We show that, in fission yeast, spindle rotation is dependent on the interaction of astral microtubules with the cortical actin cytoskeleton. Interaction initially occurs with a region surrounding the nucleus, which we term the astral microtubule interaction zone (AMIZ). Simultaneous contact of astral microtubules from both poles with the AMIZ directs spindle rotation and this requires both actin and two type V myosins, Myo51 and Myo52. Astral microtubules from one pole only then contact the CAR, which is located at the centre of the AMIZ. We demonstrate that the anillin homologue Mid1, which dictates correct placement of the CAR, is necessary to stabilise the mitotic spindle perpendicular to the axis of cell division. Finally, we show that the position of the mitotic spindle is monitored by a checkpoint that regulates the timing of sister chromatid separation.

Spatial and temporal pathway for assembly and constriction of the contractile ring in fission yeast cytokinesis

Microscopy of fluorescent fusion proteins and genetic dependencies show that fission yeast assemble and constrict a cytokinetic contractile ring in a precisely timed, sequential order. More than 90 min prior to separation of the spindle pole bodies (SPB), the anillin-like protein (Mid1p) migrates from the nucleus and specifies a broad band of cortex around the equator as the division site. Between 10 min before and 2 min after SPB separation, conventional myosin-II (Myo2p), IQGAP (Rng2p), PCH protein (Cdc15p), and formin (Cdc12p) join the broad band independent of actin filaments. Over the subsequent 10 min prior to anaphase B, this broad band of proteins condenses into a contractile ring including actin, tropomyosin (Cdc8p), and alpha-actinin (Ain1p). During anaphase B, unconventional myosin-II (Myp2p) joins the ring followed by the septin (Spn1p). Ring contraction and disassembly begin 37 min after SPB separation. This spatial and temporal hierarchy provides the framework for analysis of molecular mechanisms.

Role of the two type II myosins, Myo2 and Myp2, in cytokinetic actomyosin ring formation and function in fission yeast

The formation and contraction of a cytokinetic actomyosin ring (CAR) is essential for the execution of cytokinesis in fission yeast. Unlike most organisms in which its composition has been investigated, the fission yeast CAR contains two type II myosins encoded by the genes myo2(+) and myp2(+). myo2(+) is an essential gene whilst myp2(+) is dispensable under normal growth conditions. Myo2 is hence the major contractile protein of the CAR whilst Myp2 plays a more subtle and, as yet, incompletely documented role. Using a fission yeast strain in which the chromosomal copy of the myo2(+) gene is fused to the gene encoding green fluorescent protein (GFP), we analysed CAR formation and function in the presence and absence of Myp2. No change in the rate of CAR contraction was observed when Myp2 was absent although the CAR persisted longer in the contracted state and was occasionally observed to split into two discrete rings. This was also observed in myp2Delta cells following actin depolymerisation with latrunculin. CAR contraction in the absence of Myp2 was completely abolished in the presence of elevated levels of chloride ions. Thus, Myp2 appears to contribute to the stability of the CAR, in particular at a late stage of CAR contraction, and to be a component of the signalling pathway that regulates cytokinesis in response to elevated levels of chloride. To determine whether the presence of two type II myosins was a feature of cytokinesis in other fungi that divide by septation, we searched the genomes of two filamentous fungi, Aspergillus fumigatus and Neurospora crassa, for myosin genes. As in fission yeast, both A. fumigatus and N. crassa contained myosins of classes I, II, and V. Unlike fission yeast, both contained a single type II myosin gene that, on the basis of its tail structure, was more reminiscent of Myp2 than Myo2. The significance of these observations to our understanding of septum to formation and cleavage is discussed.

Cytokinetic actomyosin ring formation and septation in fission yeast are dependent on the full recruitment of the polo-like kinase Plo1 to the spindle pole body and a functional spindle assembly checkpoint

In dividing cells, the assembly and contraction of the cytokinetic actomyosin ring (CAR) is precisely coordinated with spindle formation and chromosome segregation. Despite having a cell wall, the fission yeast Schizosaccharomyces pombe forms a CAR reminiscent of the structure responsible for the cleavage of cells with flexible boundaries. We used the myo2-gc fission yeast strain in which the chromosomal copy of the type II myosin gene, myo2(+), is fused to the gene encoding green fluorescent protein (GFP) to investigate the dynamics of Myo2 recruitment to the cytokinetic actomyosin ring in living cells. Analysis of CAR formation in relation to spindle pole body (SPB) and centromere separation enabled us to pinpoint the timing of Myo2 recruitment into a stable CAR structure to the onset of anaphase A. Depolymerisation of actin with latrunculin B did not affect the timing of Myo2 accumulation at the cell equator (although Myo2 no longer formed a ring), whereas depolymerisation of microtubules with either thiabendazole (TBZ) or methyl 2-benzimidazolecarbamate (MBC) resulted in a delay of up to 90 minutes in CAR formation. Microtubule depolymerisation also delayed the localisation of other CAR components such as actin and Mid1/Dmf1. The delay of cytokinesis in response to loss of microtubule integrity was abolished in cells lacking the spindle assembly checkpoint protein Mad2 or containing non-functional Cdc16, a component of the fission yeast septation initiation network (SIN). The delay was also abolished in cells lacking Zfs1, a component of the previously described S. pombe cytokinesis checkpoint. Recruitment of the polo-related kinase, Plo1, a key regulator of CAR formation, to the SPBs was substantially reduced in TBZ in a Mad2-dependent manner. Loading of Cdc7, a component of the SIN and downstream of Plo1 in the cytokinesis pathway, onto the the SPBs was also delayed in TBZ to the same extent as CAR formation. We conclude that CAR formation is subject to regulation by the spindle assembly checkpoint via the loading of Plo1 onto the SPBs and the consequent activation of the SIN.