The Methanobacterium thermoautotrophicum MCM protein can form heptameric rings

Cryo-EM Structure of AAV2 Rep68 bound to integration site AAVS1: Insights into the mechanism of DNA melting

The Rep68 protein from Adeno-Associated Virus (AAV) is a multifunctional SF3 helicase that performs most of the DNA transactions required for the viral life cycle. During AAV DNA replication, Rep68 assembles at the origin and catalyzes the DNA melting and nicking reactions during the hairpin rolling replication process to complete the second-strand synthesis of the AAV genome. Here, we report the Cryo-EM structures of Rep68 bound to double-stranded DNA (dsDNA) containing the sequence of the AAVS1 integration site in different nucleotide-bound states. In the apo state, Rep68 forms a heptameric complex around DNA, with three Origin Binding Domains (OBDs) bound to the Rep Binding Site (RBS) sequence and three other OBDs forming transient dimers with them. The AAA+ domains form an open ring with no interactions between subunits and with DNA. We hypothesize the heptameric quaternary structure is necessary to load onto dsDNA. In the ATPγS-bound state, a subset of three subunits binds the nucleotide, undergoing a large conformational change, inducing the formation of intersubunit interactions interaction and interaction with three consecutive DNA phosphate groups. Moreover, the induced conformational change positions three phenylalanine residues to come in close contact with the DNA backbone, producing a distortion in the DNA. We propose that the phenylalanine residues can potentially act as a hydrophobic wedge in the DNA melting process.

Comprehensive structural characterization of the human AAA+ disaggregase CLPB in the apo- and substrate-bound states reveals a unique mode of action driven by oligomerization

The human AAA+ ATPase CLPB (SKD3) is a protein disaggregase in the mitochondrial intermembrane space (IMS) and functions to promote the solubilization of various mitochondrial proteins. Loss-of-function CLPB mutations are associated with a few human diseases with neutropenia and neurological disorders. Unlike canonical AAA+ proteins, CLPB contains a unique ankyrin repeat domain (ANK) at its N-terminus. How CLPB functions as a disaggregase and the role of its ANK domain are currently unclear. Herein, we report a comprehensive structural characterization of human CLPB in both the apo- and substrate-bound states. CLPB assembles into homo-tetradecamers in apo-state and is remodeled into homo-dodecamers upon substrate binding. Conserved pore-loops (PLs) on the ATPase domains form a spiral staircase to grip and translocate the substrate in a step-size of 2 amino acid residues. The ANK domain is not only responsible for maintaining the higher-order assembly but also essential for the disaggregase activity. Interactome analysis suggests that the ANK domain may directly interact with a variety of mitochondrial substrates. These results reveal unique properties of CLPB as a general disaggregase in mitochondria and highlight its potential as a target for the treatment of various mitochondria-related diseases.

The helicase core accessory regions of the phage BFK20 DnaB-like helicase gp43 significantly affect its activity, oligomeric state and DNA binding properties

The multifunctional phage replication protein gp43 is composed of an N-terminal prim-pol domain and a C-terminal domain similar to the SF4-type replicative helicases. We prepared four mutants all missing the prim-pol domain with the helicase core flanked by accessory N- and C-terminal regions truncated to varying extents. The shortest fragment still possessing strong ssDNA-dependent ATPase activity and helicase activity was gp43HEL519-983. The other proteins tested were gp43HEL557-983, gp43HEL519-855 and gp43HEL519-896. Removal of the 38 N-terminal residues in gp43HEL557-983, or the 128 and 87 C-terminal residues in gp43HEL519-855 and gp43HEL519-896, resulted in a significant decrease in the ATPase activities. The 38-amino acid N-terminal region has probably a function in modulating DNA binding and protein oligomerization. Deletion of the 87 C-terminal residues resulted in a twofold increase in the unwinding rate. This region is likely indispensable for binding to DNA substrates.

Unwinding 20 Years of the Archaeal Minichromosome Maintenance Helicase

Replicative DNA helicases are essential cellular enzymes that unwind duplex DNA in front of the replication fork during chromosomal DNA replication. Replicative helicases were discovered, beginning in the 1970s, in bacteria, bacteriophages, viruses, and eukarya, and, in the mid-1990s, in archaea. This year marks the 20th anniversary of the first report on the archaeal replicative helicase, the minichromosome maintenance (MCM) protein. This minireview summarizes 2 decades of work on the archaeal MCM.

Hexameric assembly of the AAA+ protein McrB is necessary for GTPase activity

McrBC is one of the three modification-dependent restriction enzymes encoded by the Escherichia coli K12 chromosome. Amongst restriction enzymes, McrBC and its close homologues are unique in employing the AAA+ domain for GTP hydrolysis-dependent activation of DNA cleavage. The GTPase activity of McrB is stimulated by the endonuclease subunit McrC. It had been reported previously that McrB and McrC subunits oligomerise together into a high molecular weight species. Here we conclusively demonstrate using size exclusion chromatography coupled multi-angle light scattering (SEC-MALS) and images obtained by electron cryomicroscopy that McrB exists as a hexamer in solution. Furthermore, based on SEC-MALS and SAXS analyses of McrBC and the structure of McrB, we propose that McrBC is a complex of two McrB hexamers bridged by two subunits of McrC, and that the complete assembly of this complex is integral to its enzymatic activity. We show that the nucleotide-dependent oligomerisation of McrB precedes GTP hydrolysis. Mutational studies show that, unlike other AAA+ proteins, the catalytic Walker B aspartate is required for oligomerisation.

Assessing heterogeneity in oligomeric AAA+ machines

ATPases Associated with various cellular Activities (AAA+ ATPases) are molecular motors that use the energy of ATP binding and hydrolysis to remodel their target macromolecules. The majority of these ATPases form ring-shaped hexamers in which the active sites are located at the interfaces between neighboring subunits. Structural changes initiate in an active site and propagate to distant motor parts that interface and reshape the target macromolecules, thereby performing mechanical work. During the functioning cycle, the AAA+ motor transits through multiple distinct states. Ring architecture and placement of the catalytic sites at the intersubunit interfaces allow for a unique level of coordination among subunits of the motor. This in turn results in conformational differences among subunits and overall asymmetry of the motor ring as it functions. To date, a large amount of structural information has been gathered for different AAA+ motors, but even for the most characterized of them only a few structural states are known and the full mechanistic cycle cannot be yet reconstructed. Therefore, the first part of this work will provide a broad overview of what arrangements of AAA+ subunits have been structurally observed focusing on diversity of ATPase oligomeric ensembles and heterogeneity within the ensembles. The second part of this review will concentrate on methods that assess structural and functional heterogeneity among subunits of AAA+ motors, thus bringing us closer to understanding the mechanism of these fascinating molecular motors.

Structure of an octameric form of the minichromosome maintenance protein from the archaeon Pyrococcus abyssi

Cell division is a complex process that requires precise duplication of genetic material. Duplication is concerted by replisomes. The Minichromosome Maintenance (MCM) replicative helicase is a crucial component of replisomes. Eukaryotic and archaeal MCM proteins are highly conserved. In fact, archaeal MCMs are powerful tools for elucidating essential features of MCM function. However, while eukaryotic MCM2-7 is a heterocomplex made of different polypeptide chains, the MCM complexes of many Archaea form homohexamers from a single gene product. Moreover, some archaeal MCMs are polymorphic, and both hexameric and heptameric architectures have been reported for the same polypeptide. Here, we present the structure of the archaeal MCM helicase from Pyrococcus abyssi in its single octameric ring assembly. To our knowledge, this is the first report of a full-length octameric MCM helicase.

Arabidopsis thaliana MCM3 single subunit of MCM2-7 complex functions as 3' to 5' DNA helicase

Minichromosome maintenance 2-7 (MCM2-7) proteins are conserved eukaryotic replicative factors essential for the DNA replication at its initiation and elongation step, and act as a licensing factor. The MCM2-7 and MCM4/6/7subcomplex exhibit DNA helicase activity, and are therefore regarded as the replicative helicase. The MCM proteins have not been studied in detail in plant system. Here, we present the biochemical characterization of Arabidopsis thaliana MCM3 single subunit and show that it exhibits in vitro unwinding and ATPase activities. AtMCM3 shows a greater unwinding activity with 5' forked partial DNA duplex substrate as compared to 3' forked and non-forked substrates. ATP and magnesium ion are indispensable for its DNA helicase activity. Specifically, ATP and dATP are the preferred nucleotides for its unwinding activity. The directionality of the AtMCM3 has been determined to be in 3' to 5' direction. The oligomerization status of AtMCM3 single subunit protein indicates that it is present in different multimeric forms. The unraveling of the helicase activity of AtMCM3 will provide better insights into the plant DNA replication.

Archaeal MCM Proteins as an Analog for the Eukaryotic Mcm2-7 Helicase to Reveal Essential Features of Structure and Function

In eukaryotes, the replicative helicase is the large multisubunit CMG complex consisting of the Mcm2–7 hexameric ring, Cdc45, and the tetrameric GINS complex. The Mcm2–7 ring assembles from six different, related proteins and forms the core of this complex. In archaea, a homologous MCM hexameric ring functions as the replicative helicase at the replication fork. Archaeal MCM proteins form thermostable homohexamers, facilitating their use as models of the eukaryotic Mcm2–7 helicase. Here we review archaeal MCM helicase structure and function and how the archaeal findings relate to the eukaryotic Mcm2–7 ring.

Characterization of the MCM homohexamer from the thermoacidophilic euryarchaeon Picrophilus torridus

The typical archaeal MCM exhibits helicase activity independently invitro. This study characterizes MCM from the euryarchaeon Picrophilus torridus. While PtMCM hydrolyzes ATP in DNA-independent manner, it displays very poor ability to unwind DNA independently, and then too only under acidic conditions. The protein exists stably in complex with PtGINS in whole cell lysates, interacting directly with PtGINS under neutral and acidic conditions. GINS strongly activates MCM helicase activity, but only at low pH. In consonance with this, PtGINS activates PtMCM-mediated ATP hydrolysis only at low pH, with the amount of ATP hydrolyzed during the helicase reaction increasing more than fifty-fold in the presence of GINS. While the stimulation of MCM-mediated helicase activity by GINS has been reported in MCMs from P.furiosus, T.kodakarensis, and very recently, T.acidophilum, to the best of our knowledge, this is the first report of an MCM helicase demonstrating DNA unwinding activity only at such acidic pH, across all archaea and eukaryotes. PtGINS may induce/stabilize a conducive conformation of PtMCM under acidic conditions, favouring PtMCM-mediated DNA unwinding coupled to ATP hydrolysis. Our findings underscore the existence of divergent modes of replication regulation among archaea and the importance of investigating replication events in more archaeal organisms.

Proteomic dissection of DNA polymerization

DNA polymerases replicate the genome by associating with a range of other proteins that enable rapid, high-fidelity copying of DNA. This complex of proteins and nucleic acids is termed the replisome. Proteins of the replisome must interact with other networks of proteins, such as those involved in DNA repair. Many of the proteins involved in DNA polymerization and the accessory proteins are known, but the array of proteins they interact with, and the spatial and temporal arrangement of these interactions, are current research topics. Mass spectrometry is a technique that can be used to identify the sites of these interactions and to determine the precise stoichiometries of binding partners in a functional complex. A complete understanding of the macromolecular interactions involved in DNA replication and repair may lead to discovery of new targets for antibiotics against bacteria and biomarkers for diagnosis of diseases, such as cancer, in humans.

The 1.8-Å crystal structure of the N-terminal domain of an archaeal MCM as a right-handed filament

Mini-chromosome maintenance (MCM) proteins are the replicative helicase necessary for DNA replication in both eukarya and archaea. Most of archaea only have one MCM gene. Here, we report a 1.8-Å crystal structure of the N-terminal MCM from the archaeon Thermoplasma acidophilum (tapMCM). In the structure, the MCM N-terminus forms a right-handed filament that contains six subunits in each turn, with a diameter of 25Å of the central channel opening. The inner surface is highly positively charged, indicating DNA binding. This filament structure with six subunits per turn may also suggests a potential role for an open-ring structure for hexameric MCM and dynamic conformational changes in initiation and elongation stages of DNA replication.

The minichromosome maintenance replicative helicase

The eukaryotic replicative helicase, the minichromosome maintenance (MCM) complex, is composed of six distinct, but related, subunits MCM(2-7). The relationship between the sequences of the subunits indicates that they are derived from a common ancestor and indeed, present-day archaea possess a homohexameric MCM. Recent progress in the biochemical and structural studies of both eukaryal and archaeal MCM complexes are beginning to shed light on the mechanisms of action of this key component of the replisome.

Structure and evolutionary origins of the CMG complex

The CMG (Cdc45-MCM-GINS) complex is the eukaryotic replicative helicase, the enzyme that unwinds double-stranded DNA at replication forks. All three components of the CMG complex are essential for its function, but only in the case of MCM, the molecular motor that harnesses the energy of ATP hydrolysis to catalyse strand separation, is that function clear. Here, we review current knowledge of the three-dimensional structure of the CMG complex and its components and highlight recent advances in our understanding of its evolutionary origins.

The role of bacterial enhancer binding proteins as specialized activators of σ54-dependent transcription

Bacterial enhancer binding proteins (bEBPs) are transcriptional activators that assemble as hexameric rings in their active forms and utilize ATP hydrolysis to remodel the conformation of RNA polymerase containing the alternative sigma factor σ(54). We present a comprehensive and detailed summary of recent advances in our understanding of how these specialized molecular machines function. The review is structured by introducing each of the three domains in turn: the central catalytic domain, the N-terminal regulatory domain, and the C-terminal DNA binding domain. The role of the central catalytic domain is presented with particular reference to (i) oligomerization, (ii) ATP hydrolysis, and (iii) the key GAFTGA motif that contacts σ(54) for remodeling. Each of these functions forms a potential target of the signal-sensing N-terminal regulatory domain, which can act either positively or negatively to control the activation of σ(54)-dependent transcription. Finally, we focus on the DNA binding function of the C-terminal domain and the enhancer sites to which it binds. Particular attention is paid to the importance of σ(54) to the bacterial cell and its unique role in regulating transcription.

Structure and mechanism of hexameric helicases

Hexameric helicases are responsible for many biological processes, ranging from DNA replication in various life domains to DNA repair, transcriptional regulation and RNA metabolism, and encompass superfamilies 3-6 (SF3-6).To harness the chemical energy from ATP hydrolysis for mechanical work, hexameric helicases have a conserved core engine, called ASCE, that belongs to a subdivision of the P-loop NTPases. Some of the ring helicases (SF4 and SF5) use a variant of ASCE known as RecA-like, while some (SF3 and SF6) use another variant known as AAA+ fold. The NTP-binding sites are located at the interface between monomers and include amino-acid residues coming from neighbouring subunits, providing a mean for small structural changes within the ATP-binding site to be amplified into large inter-subunit movement.The ring structure has a central channel which encircles the nucleic acid. The topological link between the protein and the nucleic acid substrate increases the stability and processivity of the enzyme. This is probably the reason why within cellular systems the critical step of unwinding dsDNA ahead of the replication fork seems to be almost invariably carried out by a toroidal helicase, whether in bacteria, archaea or eukaryotes, as well as in some viruses.Over the last few years, a large number of biochemical, biophysical and structural data have thrown new light onto the architecture and function of these remarkable machines. Although the evidence is still limited to a couple of systems, biochemical and structural results suggest that motors based on RecA and AAA+ folds have converged on similar mechanisms to couple ATP-driven conformational changes to movement along nucleic acids.

Oligomeric properties of adeno-associated virus Rep68 reflect its multifunctionality

The adeno-associated virus (AAV) encodes four regulatory proteins called Rep. The large AAV Rep proteins Rep68 and Rep78 are essential factors required in almost every step of the viral life cycle. Structurally, they share two domains: a modified version of the AAA(+) domain that characterizes the SF3 family of helicases and an N-terminal domain that binds DNA specifically. The combination of these two domains imparts extraordinary multifunctionality to work as initiators of DNA replication and regulators of transcription, in addition to their essential role during site-specific integration. Although most members of the SF3 family form hexameric rings in vitro, the oligomeric nature of Rep68 is unclear due to its propensity to aggregate in solution. We report here a comprehensive study to determine the oligomeric character of Rep68 using a combination of methods that includes sedimentation velocity ultracentrifugation, electron microscopy, and hydrodynamic modeling. We have determined that residue Cys151 induces Rep68 to aggregate in vitro. We show that Rep68 displays a concentration-dependent dynamic oligomeric behavior characterized by the presence of two populations: one with monomers and dimers in slow equilibrium and a second one consisting of a mixture of multiple-ring structures of seven and eight members. The presence of either ATP or ADP induces formation of larger complexes formed by the stacking of multiple rings. Taken together, our results support the idea of a Rep68 molecule that exhibits the flexible oligomeric behavior needed to perform the wide range of functions occurring during the AAV life cycle.

MCM structure and mechanics: what we have learned from archaeal MCM

Minichromosome maintenance (MCM) complexes have been identified as the primary replicative helicases responsible for unwinding DNA for genome replication. The focus of this chapter is to discuss the current structural and functional understanding of MCMs and their role at origins of replication, which are based mostly on the studies of MCM proteins and MCM complexes from archaeal genomes.

The GINS complex from the thermophilic archaeon, Thermoplasma acidophilum may function as a homotetramer in DNA replication

The eukaryotic GINS heterotetramer, consisting of Sld5, Psf1, Psf2, and Psf3, participates in "CMG complex" formation with mini-chromosome maintenance (MCM) and Cdc45 as a key component of a replicative helicase. There are only two homologs of the GINS proteins in Archaea, and these proteins, Gins51 and Gins23, form a heterotetrameric GINS with a 2:2 molar ratio. The Pyrococcus furiosus GINS stimulates the ATPase and helicase activities of its cognate MCM, whereas the Sulfolobus solfataricus GINS does not affect those activities of its cognate MCM, although the proteins bind each other. Intriguingly, Thermoplasma acidophilum, as well as many euryarchaea, have only one gene encoding the sequence homologous to that of archaeal Gins protein (Gins51) on the genome. In this study, we investigated the biochemical properties of the gene product (TaGins51). A gel filtration and electron microscopy revealed that TaGins51 forms a homotetramer. A physical interaction between TaGins51 and TaMcm was detected by a surface plasmon resonance analysis. Unexpectedly, TaGins51 inhibited the ATPase activity, but did not affect the helicase activity of its cognate MCM. These results suggest that another factor is required to form a stable helicase complex with MCM and GINS at the replication fork in T. acidophilum cells.

The structural basis for MCM2-7 helicase activation by GINS and Cdc45

Two central steps for initiating eukaryotic DNA replication involve loading of the Mcm2-7 helicase onto double-stranded DNA and its activation by GINS-Cdc45. To better understand these events, we determined the structures of Mcm2-7 and the CMG complex by using single-particle electron microscopy. Mcm2-7 adopts two conformations--a lock-washer-shaped spiral state and a planar, gapped-ring form--in which Mcm2 and Mcm5 flank a breach in the helicase perimeter. GINS and Cdc45 bridge this gap, forming a topologically closed assembly with a large interior channel; nucleotide binding further seals off the discontinuity between Mcm2 and Mcm5, partitioning the channel into two smaller pores. Together, our data help explain how GINS and Cdc45 activate Mcm2-7, indicate that Mcm2-7 loading may be assisted by a natural predisposition of the hexamer to form open rings, and suggest a mechanism by which the CMG complex assists DNA strand separation.

Origin DNA melting and unwinding in DNA replication

Genomic DNA replication is a necessary step in the life cycles of all organisms. To initiate DNA replication, the double-stranded DNA (dsDNA) at the origin of replication must be separated or melted; this melted region is propagated and a mature replication fork is formed. To accomplish origin recognition, initial DNA melting, and the eventual formation of a replication fork, coordinated activity of initiators, helicases, and other cellular factors are required. In this review, we focus on recent advances in the structural and biochemical studies of the initiators and the replicative helicases in multiple replication systems, with emphasis on the systems in archaeal and eukaryotic cells. These studies have yielded insights into the plausible mechanisms of the early stages of DNA replication.

Dynamic effects of cofactors and DNA on the oligomeric state of human mitochondrial DNA helicase

We examined the effects of cofactors and DNA on the stability, oligomeric state and conformation of the human mitochondrial DNA helicase. We demonstrate that low salt conditions result in protein aggregation that may cause dissociation of oligomeric structure. The low salt sensitivity of the mitochondrial DNA helicase is mitigated by the presence of magnesium, nucleotide, and increased temperature. Electron microscopic and glutaraldehyde cross-linking analyses provide the first evidence of a heptameric oligomer and its interconversion from a hexameric form. Limited proteolysis by trypsin shows that binding of nucleoside triphosphate produces a conformational change that is distinct from the conformation observed in the presence of nucleoside diphosphate. We find that single-stranded DNA binding occurs in the absence of cofactors and renders the mitochondrial DNA helicase more susceptible to proteolytic digestion. Our studies indicate that the human mitochondrial DNA helicase shares basic properties with the SF4 replicative helicases, but also identify common features with helicases outside the superfamily, including dynamic conformations similar to other AAA(+) ATPases.

The Mcm complex: unwinding the mechanism of a replicative helicase

The Mcm2-7 complex serves as the eukaryotic replicative helicase, the molecular motor that both unwinds duplex DNA and powers fork progression during DNA replication. Consistent with its central role in this process, much prior work has illustrated that Mcm2-7 loading and activation are landmark events in the regulation of DNA replication. Unlike any other hexameric helicase, Mcm2-7 is composed of six unique and essential subunits. Although the unusual oligomeric nature of this complex has long hampered biochemical investigations, recent advances with both the eukaryotic as well as the simpler archaeal Mcm complexes provide mechanistic insight into their function. In contrast to better-studied homohexameric helicases, evidence suggests that the six Mcm2-7 complex ATPase active sites are functionally distinct and are likely specialized to accommodate the regulatory constraints of the eukaryotic process.

Structural biology of MCM helicases

The eukaryotic MCM2-7 complex is recruited onto origins of replication during the G1 phase of the cell cycle and acts as the main helicase at the replication fork during the S phase. Over the last few years a number of structural reports on MCM proteins using both electron microscopy and protein crystallography have been published. The crystal structures of two (almost) full-length archaeal homologs provide the first atomic pictures of a MCM helicase. However one of the structures is at low resolution and the other is of an inactive MCM. Moreover, both proteins are monomeric in the crystal, whereas the activity of the complex is critically dependent on oligomerization. Lower resolution structures derived from electron microscopy studies are therefore crucial to complement the crystallographic analysis and to assemble the multimeric complex that is active in the cell. A critical analysis of all the structural results elucidates the potential conformational changes and dynamic behavior of MCM helicase to provide a first insight into the gamut of molecular configurations adopted during the processes of DNA melting and unwinding.

Receiver domains control the active-state stoichiometry of Aquifex aeolicus sigma54 activator NtrC4, as revealed by electrospray ionization mass spectrometry

A common challenge with studies of proteins in vitro is determining which constructs and conditions are most physiologically relevant. sigma(54) activators are proteins that undergo regulated assembly to form an active ATPase ring that enables transcription by sigma(54)-polymerase. Previous studies of AAA(+) ATPase domains from sigma(54) activators have shown that some are heptamers, while others are hexamers. Because active oligomers assemble from off-state dimers, it was thought that even-numbered oligomers should dominate, and that heptamer formation would occur when individual domains of the activators, rather than the intact proteins, were studied. Here we present results from electrospray ionization mass spectrometry experiments characterizing the assembly states of intact NtrC4 (a sigma(54) activator from Aquifex aeolicus, an extreme thermophile), as well as its ATPase domain alone, and regulatory-ATPase and ATPase-DNA binding domain combinations. We show that the full-length and activated regulatory-ATPase proteins form hexamers, whereas the isolated ATPase domain, unactivated regulatory-ATPase, and ATPase-DNA binding domain form heptamers. Activation of the N-terminal regulatory domain is the key factor stabilizing the hexamer form of the ATPase, relative to the heptamer.

A biochemically active MCM-like helicase in Bacillus cereus

The mini-chromosome maintenance (MCM) proteins serve as the replicative helicases in archaea and eukaryotes. Interestingly, an MCM homolog was identified, by BLAST analysis, within a phage integrated in the bacterium Bacillus cereus (Bc). BcMCM is only related to the AAA region of MCM-helicases; the typical amino-terminus is missing and is replaced by a segment with weak homology to primases. We show that BcMCM displays 3′→5′ helicase and ssDNA-stimulated ATPase activity, properties that arise from its conserved AAA domain. Isolated BcMCM is a monomer in solution but likely forms the functional oligomer in vivo. We found that the BcMCM amino-terminus can bind ssDNA and harbors a zinc atom, both hallmarks of the typical MCM amino-terminus. No BcMCM-catalyzed primase activity could be detected. We propose that the divergent amino-terminus of BcMCM is a paralog of the corresponding region of MCM-helicases. A divergent amino terminus makes BcMCM a useful model for typical MCM-helicases since it accomplishes the same function using an apparently unrelated structure.

Mutations in subdomain B of the minichromosome maintenance (MCM) helicase affect DNA binding and modulate conformational transitions

Minichromosome maintenance (MCM) proteins are believed to provide the replicative helicase activity in eukaryotes and archaea. The single MCM orthologue from Methanothermobacter thermautotrophicus (MthMCM) has been extensively characterized as a model of the eukaryotic heterohexameric MCM complex. MthMCM forms high molecular weight complexes in solution consistent with a dodecamer. Visualization of this complex by electron microscopy suggests that single and double heptameric or hexameric rings can form. We have mutated two arginine residues (Arg-137, Arg-160) in the N-terminal subdomain B of MthMCM based on their apparent potential to form inter-ring hydrogen bonds. Both the single R137A and the double R137A,R160A mutants were characterized by a combination of biophysical, biochemical, and electron microscopy techniques. Biophysical analysis coupled with electron microscopy studies shows that the R137A mutant forms a double heptameric ring, whereas the R137A,R160A protein assembles as a single heptamer. They both show a defect in DNA binding and a concomitant conformational change in subdomain A, with the double mutant displaying significant defects in helicase activity as well. We propose a model in which MCM loading and the subsequent activation of the helicase activity involve a conformational transition that is connected to a DNA binding event.

Methanococcus maripaludis: an archaeon with multiple functional MCM proteins?

There are a large number of proteins involved in the control of eukaryotic DNA replication, which act together to ensure DNA is replicated only once every cell cycle. Key proteins involved in the initiation and elongation phases of DNA replication include the MCM (minchromosome maintenance) proteins, MCM2-MCM7, a family of six related proteins believed to act as the replicative helicase. Genome sequencing has revealed that the archaea possess a simplified set of eukaryotic replication homologues. The complexity of the DNA replication machinery in eukaryotes has led to a number of archaeal species being adapted as model organisms for the study of the DNA replication process. Most archaea sequenced to date possess a single MCM homologue that forms a hexameric complex. Recombinant MCMs from several archaea have been used in the biochemical characterization of the protein, revealing that the MCM complex has ATPase, DNA-binding and -unwinding activities. Unusually, the genome of the methanogenic archaeon Methanococcus maripaludis contains four MCM homologues, all of which contain the conserved motifs required for function. The availability of a wide range of genetic tools for the manipulation of M. maripaludis and the relative ease of growth of this organism in the laboratory makes it a good potential model for studying the role of multiple MCMs in DNA replication.

How is the archaeal MCM helicase assembled at the origin? Possible mechanisms

In order for any organism to replicate its DNA, a helicase must unwind the duplex DNA in front of the replication fork. In archaea, the replicative helicase is the MCM (minichromosome maintenance) helicase. Although much is known about the biochemical properties of the MCM helicase, the mechanism of assembly at the origin of replication is unknown. In the present paper, several possible mechanisms for the loading process are described.

The Methanothermobacter thermautotrophicus MCM helicase is active as a hexameric ring

The minichromosome maintenance (MCM) complex is thought to function as the replicative helicase in archaea and eukarya. The structure of the single MCM protein homologue from the archaeon Methanothermobacter thermautotrophicus is not yet clear, and hexameric, heptameric, octameric, and dodecameric structures, open rings, and filamentous structures have been reported. Using a combination of biochemical and structural analysis, it is shown here that the M. thermautotrophicus MCM helicase is active as a hexamer.

AAA+ ATPases in the initiation of DNA replication

All cellular organisms and many viruses rely on large, multi-subunit molecular machines, termed replisomes, to ensure that genetic material is accurately duplicated for transmission from one generation to the next. Replisome assembly is facilitated by dedicated initiator proteins, which serve to both recognize replication origins and recruit requisite replisomal components to the DNA in a cell-cycle coordinated manner. Exactly how imitators accomplish this task, and the extent to which initiator mechanisms are conserved among different organisms have remained outstanding issues. Recent structural and biochemical findings have revealed that all cellular initiators, as well as the initiators of certain classes of double-stranded DNA viruses, possess a common adenine nucleotide-binding fold belonging to the ATPases Associated with various cellular Activities (AAA+) family. This review focuses on how the AAA+ domain has been recruited and adapted to control the initiation of DNA replication, and how the use of this ATPase module underlies a common set of initiator assembly states and functions. How biochemical and structural properties correlate with initiator activity, and how species-specific modifications give rise to unique initiator functions, are also discussed.

Cryo-electron microscopy reveals a novel DNA-binding site on the MCM helicase

The eukaryotic MCM2-7 complex is recruited at origins of replication during the G1 phase and acts as the main helicase at the replication fork during the S phase of the cell cycle. To characterize the interplay between the MCM helicase and DNA prior to the melting of the double helix, we determined the structure of an archaeal MCM orthologue bound to a 5.6-kb double-stranded DNA segment, using cryo-electron microscopy. DNA wraps around the N-terminal face of a single hexameric ring. This interaction requires a conformational change within the outer belt of the MCM N-terminal domain, exposing a previously unrecognized helix-turn-helix DNA-binding motif. Our findings provide novel insights into the role of the MCM complex during the initiation step of DNA replication.

Structural analysis of the Sulfolobus solfataricus MCM protein N-terminal domain

The Mini-Chromosome Maintenance (MCM) proteins are candidates of replicative DNA helicase in eukarya and archaea. Here we report a 2.8 Å crystal structure of the N-terminal domain (residues 1–268) of the Sulfolobus solfataricus MCM (Sso MCM) protein. The structure reveals single-hexameric ring-like architecture, at variance from the protein of Methanothermobacter thermoautotrophicus (Mth). Moreover, the central channel in Sso MCM seems significantly narrower than the Mth counterpart, which appears to more favorably accommodate single-stranded DNA than double-stranded DNA, as supported by DNA-binding assays. Structural analysis also highlights the essential role played by the zinc-binding domain in the interaction with nucleic acids and allows us to speculate that the Sso MCM N-ter domain may function as a molecular clamp to grasp the single-stranded DNA passing through the central channel. On this basis possible DNA unwinding mechanisms are discussed.

A novel mirror-symmetry analysis approach for the study of macromolecular assemblies imaged by electron microscopy

Multivariate statistical symmetry analysis is widely employed in single-particle electron-microscopy studies for the detection of symmetry components within a set of noisy two-dimensional images. So far, this technique has been used to retrieve information from the analysis of end-on view oriented particles only. Here, we propose a method to detect symmetry components from side- and tilted-view oriented particles. This method is validated using a number of in silico generated as well as real datasets, can be used to analyze stoichiometrically heterogeneous datasets, and is useful for separating particle datasets with respect to their symmetry components. Additionally, translational components in lock-washer ring configurations can be detected. Most relevantly, this method represents a powerful tool for the characterisation of distinct symmetry components within multi-layered protein assemblies, and any putative symmetry mismatch between layers. Such configurations have often been postulated, though rarely observed directly, and are thought to have a crucial role in conferring dynamicity to molecular machineries like nucleic acid packaging motors, ClpAP/ClpXP proteases, flagellar motors and the F1/F0 ATPase.

ATPase site architecture and helicase mechanism of an archaeal MCM

The subunits of the presumptive replicative helicase of archaea and eukaryotes, the MCM complex, are members of the AAA+ (ATPase-associated with various cellular activities) family of ATPases. Proteins within this family harness the chemical energy of ATP hydrolysis to perform a broad range of cellular processes. Here, we investigate the function of the AAA+ site in the mini-chromosome maintenance (MCM) complex of the archaeon Sulfolobus solfataricus (SsoMCM). We find that SsoMCM has an unusual active-site architecture, with a unique blend of features previously found only in distinct families of AAA+ proteins. We additionally describe a series of mutant doping experiments to investigate the mechanistic basis of intersubunit coordination in the generation of helicase activity. Our results indicate that MCM can tolerate catalytically inactive subunits and still function as a helicase, leading us to propose a semisequential model for helicase activity of this complex.

Modular organization of the Sulfolobus solfataricus mini-chromosome maintenance protein

Mini-chromosome maintenance (MCM) proteins form ring-like hexameric complexes that are commonly believed to act as the replicative DNA helicase at the eukaryotic/archaeal DNA replication fork. Because of their simplified composition with respect to the eukaryotic counterparts, the archaeal MCM complexes represent a good model system to use in analyzing the structural/functional relationships of these important replication factors. In this study the domain organization of the MCM-like protein from Sulfolobus solfataricus (Sso MCM) has been dissected by trypsin partial proteolysis. Three truncated derivatives of Sso MCM corresponding to protease-resistant domains were produced as soluble recombinant proteins and purified: the N-terminal domain (N-ter, residues 1-268); a fragment comprising the AAA+ and C-terminal domains (AAA+-C-ter, residues 269-686); and the C-terminal domain (C-ter, residues 504-686). All of the purified recombinant proteins behaved as monomers in solution as determined by analytical gel filtration chromatography, suggesting that the polypeptide chain integrity is required for stable oligomerization of Sso MCM. However, the AAA+-C-ter derivative, which includes the AAA+ motor domain and retains ATPase activity, was able to form dimers in solution when ATP was present, as analyzed by size exclusion chromatography and glycerol gradient sedimentation analyses. Interestingly, the AAA+-C-ter protein could displace oligonucleotides annealed to M13 single-stranded DNA although with a reduced efficiency in comparison with the full-sized Sso MCM. The implications of these findings for understanding the DNA helicase mechanism of the MCM complex are discussed.

DNA replication in the archaea

The archaeal DNA replication machinery bears striking similarity to that of eukaryotes and is clearly distinct from the bacterial apparatus. In recent years, considerable advances have been made in understanding the biochemistry of the archaeal replication proteins. Furthermore, a number of structures have now been obtained for individual components and higher-order assemblies of archaeal replication factors, yielding important insights into the mechanisms of DNA replication in both archaea and eukaryotes.

Archaeal MCM has separable processivity, substrate choice and helicase domains

The mini-chromosome maintenance (MCM) complex is the principal candidate for the replicative helicase of archaea and eukaryotes. Here, we describe a functional dissection of the roles of the three principal structural modules of the homomultimeric MCM of the hyperthermophilic archaeon Sulfolobus solfataricus. Our results include the first analysis of the central AAA+ domain in isolation. This domain possesses ATPase and helicase activity, defining this as the minimal helicase domain. Reconstitution experiments show that the helicase activity of the AAA+ domain can be stimulated by addition of the isolated N-terminal half in trans. Addition of the N-terminus influences both the processivity of the helicase and the choice of substrate that can be melted by the ATPase domain. The degenerate helix-turn-helix domain at the C-terminus of MCM exerts a negative effect on the helicase activity of the complex. These results provide the first evidence for extensive regulatory inter-domain communication within the MCM complex.

Multiple oligomeric forms of Escherichia coli DnaB helicase revealed by electrospray ionisation mass spectrometry

The Escherichia coli DnaB protein (DnaB(6)) is the hexameric helicase that unwinds genomic DNA so it can be copied by the DNA replication machinery. Loading of the helicase onto DNA requires interactions of DnaB(6) with six molecules of its loading partner protein, DnaC. Nano-electrospray ionisation mass spectrometry (nanoESI-MS) of mutant proteins was used to examine the roles of the residues Phe102 (F102) and Asp82 (D82) in the N-terminal domain of DnaB in the assembly of the hexamer. When the proteins were prepared in 1 M ammonium acetate containing magnesium and adenosine triphosphate (ATP) at pH 7.6, both hexameric and heptameric forms of wild-type and F102W, F102E and D82N mutant DnaBs were observed in mass spectra. The spectra of the D82N mutant also showed substantial amounts of a decameric species and small amounts of a dodecamer. In contrast, the F102H DnaB mutant was incapable of forming oligomers of order higher than the hexamer. Thus, although Phe102 is not the only determinant of hexamer assembly, this residue has a role in oligomerisation. NanoESI mass spectra were obtained of mixtures of DnaB(6) with DnaC. The DnaB(6)(DnaC)(6) complex (calculated M(r) 481 164) was observed only when the two proteins were present in equimolar amounts. The data are consistent with cooperative assembly of the complex. ESI mass spectra of mixtures containing DnaC and ATP showed that DnaC slowly hydrolysed ATP to ADP as indicated by ions corresponding to DnaC/ATP and DnaC/ADP complexes. These experiments show that E. coli DnaB can form a heptameric complex and that nanoESI-MS can be used to probe assembly of large (>0.5 MDa) macromolecular complexes.

Structural basis of the Methanothermobacter thermautotrophicus MCM helicase activity

The MCM complex from the archaeon Methanother-mobacter thermautotrophicus is a model for the eukaryotic MCM2-7 helicase. We present electron-microscopy single-particle reconstructions of a DNA treated M.thermautotrophicus MCM sample and a ADP.AlF(x) treated sample, respectively assembling as double hexamers and double heptamers. The electron-density maps display an unexpected asymmetry between the two rings, suggesting that large conformational changes can occur within the complex. The structure of the MCM N-terminal domain, as well as the AAA+ and the C-terminal HTH dom-ains of ZraR can be fitted into the reconstructions. Distinct configurations can be modelled for the AAA+ and the HTH domains, suggesting the nature of the conformational change within the complex. The pre-sensor 1 and the helix 2 insertions, important for the activity, can be located pointing towards the centre of the channel in the presence of DNA. We propose a mechanistic model for the helicase activity, based on a ligand-controlled rotation of the AAA+ subunits.

Evolutionary relationships and structural mechanisms of AAA+ proteins

Complex cellular events commonly depend on the activity of molecular "machines" that efficiently couple enzymatic and regulatory functions within a multiprotein assembly. An essential and expanding subset of these assemblies comprises proteins of the ATPases associated with diverse cellular activities (AAA+) family. The defining feature of AAA+ proteins is a structurally conserved ATP-binding module that oligomerizes into active arrays. ATP binding and hydrolysis events at the interface of neighboring subunits drive conformational changes within the AAA+ assembly that direct translocation or remodeling of target substrates. In this review, we describe the critical features of the AAA+ domain, summarize our current knowledge of how this versatile element is incorporated into larger assemblies, and discuss specific adaptations of the AAA+ fold that allow complex molecular manipulations to be carried out for a highly diverse set of macromolecular targets.

Oligomeric states of bacteriophage T7 gene 4 primase/helicase

Electron microscopic and crystallographic data have shown that the gene 4 primase/helicase encoded by bacteriophage T7 can form both hexamers and heptamers. After cross-linking with glutaraldehyde to stabilize the oligomeric protein, hexamers and heptamers can be distinguished either by negative stain electron microscopy or electrophoretic analysis using polyacrylamide gels. We find that hexamers predominate in the presence of either dTTP or beta,gamma-methylene dTTP whereas the ratio between hexamers and heptamers is nearly the converse in the presence of dTDP. When formed, heptamers are unable to efficiently bind either single-stranded DNA or double-stranded DNA. We postulate that a switch between heptamer to hexamer may provide a ring-opening mechanism for the single-stranded DNA binding pathway. Accordingly, we observe that in the presence of both nucleoside di- and triphosphates the gene 4 protein exists as a hexamer when bound to single-stranded DNA and as a mixture of heptamer and hexamer when not bound to single-stranded DNA. Furthermore, altering regions of the gene 4 protein postulated to be conformational switches for dTTP-dependent helicase activity leads to modulation of the heptamer to hexamer ratio.

Minichromosome maintenance helicase activity is controlled by N- and C-terminal motifs and requires the ATPase domain helix-2 insert

The minichromosome maintenance (MCM) proteins are essential conserved proteins required for DNA replication in archaea and eukaryotes. MCM proteins are believed to provide the replicative helicase activity that unwinds template DNA ahead of the replication fork. Consistent with this hypothesis, MCM proteins can form hexameric complexes that possess ATP-dependent DNA unwinding activity. The molecular mechanism by which the energy of ATP hydrolysis is harnessed to DNA unwinding is unknown, although the ATPase activity has been attributed to a highly conserved AAA+ family ATPase domain. Here we show that changes to N- and C-terminal motifs in the single MCM protein from the archaeon Methanothermobacter thermautotrophicus (MthMCM) can modulate ATP hydrolysis, DNA binding, and duplex unwinding. Furthermore, these motifs appear to influence the movement of the beta-alpha-beta insert in helix-2 of the MCM ATPase domain. Removal of this motif from MthMCM increased dsDNA-stimulated ATP hydrolysis and increased the affinity of the mutant complex for ssDNA and dsDNA. Deletion of the helix-2 insert additionally resulted in the abrogation of DNA unwinding. Our results provide significant insight into the molecular mechanisms used by the MCM helicase to both regulate and execute DNA unwinding.

Structural studies of the archaeal MCM complex in different functional states

The primary candidate for the eukaryotic replicative helicase is the MCM2-7 complex, a hetero-oligomer formed by six AAA+ paralogous polypeptides. A simplified model for structure-function studies is the homo-oligomeric orthologue from the archaeon Methanothermobacter thermoautotrophicus. The crystal structure of the DNA-interacting N-terminal domain of this homo-oligomer revealed a double hexamer in a head-to-head configuration; single-particle electron microscopy studies have shown that the full-length protein complex can form both single and double rings, in which each ring can consist of a cyclical arrangement of six or seven subunits. Using single-particle techniques and especially multivariate statistical symmetry analysis, we have assessed the changes in stoichiometry that the complex undergoes when treated with various nucleotide analogues or when binding a double-stranded DNA fragment. We found that the binding of nucleotides or of double-stranded DNA leads to the preferred formation of double-ring structures. Specifically, the protein complex is present as a double heptamer when treated with a nucleotide analogue, but it is rather found as a double hexamer when complexed with double-stranded DNA. The possible physiological role of the various stoichiometries of the complex is discussed in the light of the proposed mechanisms of helicase activity.

Influence of Chromatin and Single Strand Binding Proteins on the Activity of an Archaeal MCM

The mini-chromosome maintenance (MCM) complex is the presumptive replicative helicase in archaea and eukaryotes. In archaea, the MCM is a homo-multimer, in eukaryotes a heterohexamer composed of six related subunits, MCM 2-7. Biochemical studies using naked DNA templates have revealed that archaeal MCMs and a sub-complex of eukaryotic MCM 4, 6 and 7 have 3' to 5' helicase activity. Here, we investigate the influence of the major chromatin proteins, Alba and Sul7d, of Sulfolobus solfataricus (Sso) on the ability of the MCM complex to melt partial duplex DNA substrates. In addition, we test the effect of Sso SSB on MCM activity. We reveal that Alba represents a formidable barrier to MCM activity and further demonstrate that acetylation of Alba alleviates repression of MCM activity.

Archaeal DNA replication and repair

Since the first archaeal genome was sequenced, much attention has been focused on the study of these unique microorganisms. We have learnt that although archaeal DNA metabolic processes (replication, recombination and repair) are more similar to the metabolic processes of Eukarya than those of Bacteria, Archaea are not simply 'mini Eukarya'. They are, in fact, a mosaic of the eukaryal and bacterial systems that also possess archaeal-specific features. Recent biochemical and structural studies of the proteins that participate in archaeal DNA replication and repair have increased our understanding of these processes.

The ATPase activity of MCM2-7 is dispensable for pre-RC assembly but is required for DNA unwinding

Eukaryotes have six minichromosome maintenance (MCM) proteins that are essential for DNA replication. The contribution of ATPase activity of MCM complexes to their function in replication is poorly understood. We have established a cell-free system competent for replication in which all MCM proteins are supplied by purified recombinant Xenopus MCM complexes. Recombinant MCM2-7 complex was able to assemble onto chromatin, load Cdc45 onto chromatin, and restore DNA replication in MCM-depleted extracts. Using mutational analysis in the Walker A motif of MCM6 and MCM7 of MCM2-7, we show that ATP binding and/or hydrolysis by MCM proteins is dispensable for chromatin loading and pre-replicative complex (pre-RC) assembly, but is required for origin unwinding during DNA replication. Moreover, this ATPase-deficient mutant complex did not support DNA replication in MCM-depleted extracts. Altogether, these results both demonstrate the ability of recombinant MCM proteins to perform all replication roles of MCM complexes, and further support the model that MCM2-7 is the replicative helicase. These data establish that mutations affecting the ATPase activity of the MCM complex uncouple its role in pre-RC assembly from DNA replication.