Efficient transposition of IS911 circles in vitro

Genomic Characterization of IS6110 Insertions in Mycobacterium orygis

Mycobacterium orygis, a subspecies of the Mycobacterium tuberculosis complex (MTBC), has emerged as a significant concern in the context of One Health, with implications for zoonosis or zooanthroponosis or both. MTBC strains are characterized by the unique insertion element IS6110, which is widely used as a diagnostic marker. IS6110 transposition drives genetic modifications in MTBC, imparting genome plasticity and profound biological consequences. While IS6110 insertions are customarily found in the MTBC genomes, the evolutionary trajectory of strains seems to correlate with the number of IS6110 copies, indicating enhanced adaptability with increasing copy numbers. Here, we present a comprehensive analysis of IS6110 insertions in the M. orygis genome, utilizing ISMapper, and elucidate their genetic consequences in promoting successful host adaptation. Our study encompasses a panel of 67 paired-end reads, comprising 11 isolates from our laboratory and 56 sequences downloaded from public databases. Among these sequences, 91% exhibited high-copy, 4.5% low-copy, and 4.5% lacked IS6110 insertions. We identified 255 insertion loci, including 141 intragenic and 114 intergenic insertions. Most of these loci were either unique or shared among a limited number of isolates, potentially influencing strain behavior. Furthermore, we conducted gene ontology and pathway analysis, using eggNOG-mapper 5.0, on the protein sequences disrupted by IS6110 insertions, revealing 63 genes involved in diverse functions of Gene Ontology and 45 genes participating in various KEGG pathways. Our findings offer novel insights into IS6110 insertions, their preferential insertion regions, and their impact on metabolic processes and pathways, providing valuable knowledge on the genetic changes underpinning IS6110 transposition in M. orygis.

The dynamic network of IS30 transposition pathways

The E. coli element IS30 has adopted the copy-out-paste-in transposition mechanism that is prevalent in a number of IS-families. As an initial step, IS30 forms free circular transposition intermediates like IS minicircles or tandem IS-dimers by joining the inverted repeats of a single element or two, sometimes distantly positioned IS copies, respectively. Then, the active IR-IR junction of these intermediates reacts with the target DNA, which generates insertions, deletions, inversions or cointegrates. The element shows dual target specificity as it can insert into hot spot sequences or next to its inverted repeats. In this study the pathways of rearrangements of transposition-derived cointegrate-like structures were examined. The results showed that the probability of further rearrangements in these structures depends on whether the IS elements are flanked by hot spot sequences or take part in an IR-IR junction. The variability of the deriving products increases with the number of simultaneously available IRs and IR-IR joints in the cointegrates or the chromosome. Under certain conditions, the parental structures whose transposition formed the cointegrates are restored and persist among the rearranged products. Based on these findings, a novel dynamic model has been proposed for IS30, which possibly fits to other elements that have adopted the same transposition mechanism. The model integrates the known transposition pathways and the downstream rearrangements occurring after the formation of different cointegrate-like structures into a complex network. Important feature of this network is the presence of “feedback loops” and reversible transposition rearrangements that can explain how IS30 generates variability and preserves the original genetic constitution in the bacterial population, which contributes to the adaptability and evolution of host bacteria.

First Biochemical Steps on Bacterial Transposition Pathways

Transposons are found in a wide variety of forms throughout the prokaryotic world where they actively contribute to the adaptive strategies of bacterial communities and hence, to the continuous emergence of new multiresistant pathogens. Contrasting with their biological and societal impact, only a few bacterial transposons have been the subject of detailed molecular studies. In this chapter, we propose a set of reliable biochemical methods as a primary route for studying new transposition mechanisms. These methods include (a) a straightforward approach termed "thermal shift induction" to produce the transposase in a soluble and properly folded configuration prior to its purification, (b) an adaptation of classical electrophoretic mobility shift assays (EMSA) combined to fluorescently labeled DNA substrates to determine the DNA content of different complexes assembled by the transposase, and (c) a highly sensitive "in-gel" DNA footprinting assay to further characterize these complexes at the base pair resolution level. A combination of these approaches was recently applied to decipher the molecular organization of key intermediates in the Tn3-family transposition pathway, a mechanism that has long been refractory to biochemical studies.

A Transposon Mutagenesis System for Bifidobacterium longum subsp. longum Based on an IS3 Family Insertion Sequence, ISBlo11

Bifidobacteria are a major component of the intestinal microbiota in humans, particularly breast-fed infants. Therefore, elucidation of the mechanisms by which these bacteria colonize the intestine is desired. One approach is transposon mutagenesis, a technique currently attracting much attention because, in combination with next-generation sequencing, it enables exhaustive identification of genes that contribute to microbial fitness. We now describe a transposon mutagenesis system for Bifidobacterium longum subsp. longum 105-A (JCM 31944) based on ISBlo11, a native IS3 family insertion sequence. To build this system, xylose-inducible or constitutive bifidobacterial promoters were tested to drive the expression of full-length or a truncated form at the N terminus of the ISBlo11 transposase. An artificial transposon plasmid, pBFS12, in which ISBlo11 terminal inverted repeats are separated by a 3-bp spacer, was also constructed to mimic the transposition intermediate of IS3 elements. The introduction of this plasmid into a strain expressing transposase resulted in the insertion of the plasmid with an efficiency of >10³ CFU/μg DNA. The plasmid targets random 3- to 4-bp sequences, but with a preference for noncoding regions. This mutagenesis system also worked at least in B. longum NCC2705. Characterization of a transposon insertion mutant revealed that a putative α-glucosidase mediates palatinose and trehalose assimilation, demonstrating the suitability of transposon mutagenesis for loss-of-function analysis. We anticipate that this approach will accelerate functional genomic studies of B. longum subsp. longumIMPORTANCE Several hundred species of bacteria colonize the mammalian intestine. However, the genes that enable such bacteria to colonize and thrive in the intestine remain largely unexplored. Transposon mutagenesis, combined with next-generation sequencing, is a promising tool to comprehensively identify these genes but has so far been applied only to a small number of intestinal bacterial species. In this study, a transposon mutagenesis system was established for Bifidobacterium longum subsp. longum, a representative health-promoting Bifidobacterium species. The system enables the identification of genes that promote colonization and survival in the intestine and should help illuminate the physiology of this species.

New insights into the transposition mechanisms of IS6110 and its dynamic distribution between Mycobacterium tuberculosis Complex lineages

The insertion Sequence IS6110, only present in the pathogens of the Mycobacterium tuberculosis Complex (MTBC), has been the gold-standard epidemiological marker for TB for more than 25 years, but biological implications of IS6110 transposition during MTBC adaptation to humans remain elusive. By studying 2,236 clinical isolates typed by IS6110-RFLP and covering the MTBC, we remarked a lineage-specific content of IS6110 being higher in modern globally distributed strains. Once observed the IS6110 distribution in the MTBC, we selected representative isolates and found a correlation between the normalized expression of IS6110 and its abundance in MTBC chromosomes. We also studied the molecular regulation of IS6110 transposition and we found a synergistic action of two post-transcriptional mechanisms: a -1 ribosomal frameshift and a RNA pseudoknot which interferes translation. The construction of a transcriptionally active transposase resulted in 20-fold increase of the transposition frequency. Finally, we examined transposition in M. bovis and M. tuberculosis during laboratory starvation and in a mouse infection model of TB. Our results shown a higher transposition in M. tuberculosis, that preferably happens during TB infection in mice and after one year of laboratory culture, suggesting that IS6110 transposition is dynamically adapted to the host and to adverse growth conditions.

Since the pioneering discovery of transposition by Barbara McClintock in eukaryotes and later in prokaryotes by Robert W. Hedges and Alan E. Jacob, it has become clear the key role of mobile genetics elements in chromosome remodelling, microbial evolution and host adaptation. The insertion sequence IS6110 is widely recognized for its utility in TB diagnosis and epidemiology because it is only present in the M. tuberculosis Complex (MTBC) and its transposition provides an excellent chromosomal polymorphic variability allowing the study of recent TB transmission. This inherent feature of IS6110 leads us to hypothesize that IS6110 plays a crucial role during the TB infectious cycle. However, the biological significance of IS6110 has been hindered by its almost exclusive use as an epidemiological marker. Here, we study the regulatory mechanisms and the distribution of IS6110 in the different MTBC lineages. We discuss the potential biological implications of IS6110, that is much more than an excellent TB epidemiological tool. Since IS6110 could play an important role in the adaptation of MTBC to the host, this study opens new avenues to decipher the biological roles of IS6110 in TB pathogenesis.

Copy-out-Paste-in Transposition of IS911: A Major Transposition Pathway

IS911 has provided a powerful model for studying the transposition of members of a large class of transposable element: the IS3 family of bacterial Insertion Sequences (IS). These transpose by a Copy-out-Paste-in mechanism in which a double-strand IS circle transposition intermediate is generated from the donor site by replication and proceeds to integrate into a suitable double strand DNA target. This is perhaps one of the most common transposition mechanisms known to date. Copy-out-Paste-in transposition has been adopted by members of at least eight large IS families. This chapter details the different steps of the Copy-out-Paste-in mechanism involved in IS911 transposition. At a more biological level it also describes various aspects of regulation of the transposition process. These include transposase production by programmed translational frameshifting, transposase expression from the circular intermediate using a specialized promoter assembled at the circle junction and binding of the nascent transposase while it remains attached to the ribosome during translation (co-translational binding). This co-translational binding of the transposase to neighboring IS ends provides an explanation for the longstanding observation that transposases show a cis-preference for their activities.

Mechanisms of DNA Transposition

DNA transposases use a limited repertoire of structurally and mechanistically distinct nuclease domains to catalyze the DNA strand breaking and rejoining reactions that comprise DNA transposition. Here, we review the mechanisms of the four known types of transposition reactions catalyzed by (1) RNase H-like transposases (also known as DD(E/D) enzymes); (2) HUH single-stranded DNA transposases; (3) serine transposases; and (4) tyrosine transposases. The large body of accumulated biochemical and structural data, particularly for the RNase H-like transposases, has revealed not only the distinguishing features of each transposon family, but also some emerging themes that appear conserved across all families. The more-recently characterized single-stranded DNA transposases provide insight into how an ancient HUH domain fold has been adapted for transposition to accomplish excision and then site-specific integration. The serine and tyrosine transposases are structurally and mechanistically related to their cousins, the serine and tyrosine site-specific recombinases, but have to date been less intensively studied. These types of enzymes are particularly intriguing as in the context of site-specific recombination they require strict homology between recombining sites, yet for transposition can catalyze the joining of transposon ends to form an excised circle and then integration into a genomic site with much relaxed sequence specificity.

Bacterial insertion sequences: their genomic impact and diversity

Insertion sequences (ISs), arguably the smallest and most numerous autonomous transposable elements (TEs), are important players in shaping their host genomes. This review focuses on prokaryotic ISs. We discuss IS distribution and impact on genome evolution. We also examine their effects on gene expression, especially their role in activating neighbouring genes, a phenomenon of particular importance in the recent upsurge of bacterial antibiotic resistance. We explain how ISs are identified and classified into families by a combination of characteristics including their transposases (Tpases), their overall genetic organisation and the accessory genes which some ISs carry. We then describe the organisation of autonomous and nonautonomous IS‐related elements. This is used to illustrate the growing recognition that the boundaries between different types of mobile element are becoming increasingly difficult to define as more are being identified. We review the known Tpase types, their different catalytic activities used in cleaving and rejoining DNA strands during transposition, their organisation into functional domains and the role of this in regulation. Finally, we consider examples of prokaryotic IS domestication. In a more speculative section, we discuss the necessity of constructing more quantitative dynamic models to fully appreciate the continuing impact of TEs on prokaryotic populations.

A model for the molecular organisation of the IS911 transpososome

Tight regulation of transposition activity is essential to limit damage transposons may cause by generating potentially lethal DNA rearrangements. Assembly of a bona fide protein-DNA complex, the transpososome, within which transposition is catalysed, is a crucial checkpoint in this regulation. In the case of IS911, a member of the large IS3 bacterial insertion sequence family, the transpososome (synaptic complex A; SCA) is composed of the right and left inverted repeated DNA sequences (IRR and IRL) bridged by the transposase, OrfAB (the IS911-encoded enzyme that catalyses transposition). To characterise further this important protein-DNA complex in vitro, we used different tagged and/or truncated transposase forms and analysed their interaction with IS911 ends using gel electrophoresis. Our results allow us to propose a model in which SCA is assembled with a dimeric form of the transposase. Furthermore, we present atomic force microscopy results showing that the terminal inverted repeat sequences are probably assembled in a parallel configuration within the SCA. These results represent the first step in the structural description of the IS911 transpososome, and are discussed in comparison with the very few other transpososome examples described in the literature.

Functional organization of the inverted repeats of IS30

The mobile element IS30 has 26-bp imperfect terminal inverted repeats (IRs) that are indispensable for transposition. We have analyzed the effects of IR mutations on both major transposition steps, the circle formation and integration of the abutted ends, characteristic for IS30. Several mutants show strikingly different phenotypes if the mutations are present at one or both ends and differentially influence the transposition steps. The two IRs are equivalent in the recombination reactions and contain several functional regions. We have determined that positions 20 to 26 are responsible for binding of the N-terminal domain of the transposase and the formation of a correct 2-bp spacer between the abutted ends. However, integration is efficient without this region, suggesting that a second binding site for the transposase may exist, possibly within the region from 4 to 11 bp. Several mutations at this part of the IRs, which are highly conserved in the IS30 family, considerably affected both major transposition steps. In addition, positions 16 and 17 seem to be responsible for distinguishing the IRs of related insertion sequences by providing specificity for the transposase to recognize its cognate ends. Finally, we show both in vivo and in vitro that position 3 has a determining role in the donor function of the ends, especially in DNA cleavage adjacent to the IRs. Taken together, the present work provides evidence for a more complex organization of the IS30 IRs than was previously suggested.

Transposition of a bacterial insertion sequence in chloroplasts

Bacterial transposable elements (IS elements, transposons) represent an important determinant of genome structure and dynamics, and are a major force driving genome evolution. Here, we have tested whether bacterial insertion sequences (IS elements) can transpose in a prokaryotic compartment of the plant cell, the plastid (chloroplast). Using plastid transformation, we have integrated different versions of the Escherichia coli IS element IS150 into the plastid genome of tobacco (Nicotiana tabacum) plants. We show that IS150 is faithfully mobilized inside the chloroplast, and that enormous quantities of transposition intermediates accumulate. As synthesis of the IS150 transposase is dependent upon programmed ribosomal frame shifting, our data indicate that this process also occurs in chloroplasts. Interestingly, all insertion events detected affect a single site in the plastid genome, suggesting that the integration of IS150 is highly sequence dependent. In contrast, the initiation of the transposition process was found to be independent of the sequence context. Finally, our data also demonstrate that plastids lack the capacity to repair double-strand breaks in their genomes by non-homologous end joining, a finding that has important implications for genome stability, and which may explain the peculiar immunity of the plastid to invading promiscuous DNA sequences of nuclear and mitochondrial origin.

Bias between the left and right inverted repeats during IS911 targeted insertion

IS911 is a bacterial insertion sequence composed of two consecutive overlapping open reading frames (ORFs [orfA and orfB]) encoding the transposase (OrfAB) as well as a regulatory protein (OrfA). These ORFs are bordered by terminal left and right inverted repeats (IRL and IRR, respectively) with several differences in nucleotide sequence. IS911 transposition is asymmetric: each end is cleaved on one strand to generate a free 3'-OH, which is then used as the nucleophile in attacking the opposite insertion sequence (IS) end to generate a free IS circle. This will be inserted into a new target site. We show here that the ends exhibit functional differences which, in vivo, may favor the use of one compared to the other during transposition. Electromobility shift assays showed that a truncated form of the transposase [OrfAB(1-149)] exhibits higher affinity for IRR than for IRL. While there was no detectable difference in IR activities during the early steps of transposition, IRR was more efficient during the final insertion steps. We show here that the differential activities between the two IRs correlate with the different affinities of OrfAB(1-149) for the IRs during assembly of the nucleoprotein complexes leading to transposition. We conclude that the two inverted repeats are not equivalent during IS911 transposition and that this asymmetry may intervene to determine the ordered assembly of the different protein-DNA complexes involved in the reaction.

Formation of an inverted repeat junction in the transposition of insertion sequence ISLC3 isolated from Lactobacillus casei

An insertion sequence, ISLC3, of 1351 bp has been isolated from Lactobacillus casei. Formation of IS circles containing a 3 bp spacer (complete junction) or deletion of 25 bp at the left inverted repeat (IRL) between the abutted IS ends of the ISLC3 junction region (deleted junction) was also discovered in the lactobacilli and Escherichia coli system studied. We found that the promoter formed by the complete junction P(jun) was more active than that formed by the 25 bp deleted junction P(djun) or the indigenous promoter P(IRL). The corresponding transcription start sites for both promoter P(jun) and P(IRL) as well as P(djun) were subsequently determined using a primer extension assay. The activity of transposase OrfAB of ISLC3 was also assayed using an in vitro system. It was found that this transposase preferred to cleave a single DNA strand at the IRR over the IRL end in the transposition process, suggesting that attack of one end by the other was oriented from IRR to IRL.

Control of IS911 target selection: how OrfA may ensure IS dispersion

IS911 transposition involves a closed circular insertion sequence intermediate (IS-circle) and two IS-encoded proteins: the transposase OrfAB and OrfA which regulates IS911 insertion. OrfAB alone promotes insertion preferentially next to DNA sequences resembling IS911 ends while the addition of OrfA strongly stimulates insertion principally into DNA targets devoid of the IS911 end sequences. OrfAB shares its N-terminal region with OrfA. This includes a helix-turn-helix (HTH) motif and the first three of four heptads of a leucine zipper (LZ). OrfAB binds specifically to IS911 ends via its HTH whereas OrfA does not. We show here: that OrfA binds DNA non-specifically and that this requires the HTH; that OrfA LZ is required for its multimerization; and that both motifs are essential for OrfA activity. We propose that these OrfA properties are required to assemble a nucleoprotein complex committed to random IS911 insertion. This control of IS911 insertion activity by OrfA in this way would assure its dispersion.

Truncated forms of IS911 transposase downregulate transposition

IS911 naturally produces transposase (OrfAB) derivatives truncated at the C-terminal end (OrfAB-CTF) and devoid of the catalytic domain. A majority species, OrfAB*, was produced at higher levels at 42 degrees C than at 30 degrees C suggesting that it is at least partly responsible for the innate reduction in IS911 transposition activity at higher temperatures. An engineered equivalent of similar length, OrfAB[1-149], inhibited transposition activity in vivo or in vitro when produced along with full-length transposase. We isolated several point mutants showing higher activity than the wild-type IS911 at 42 degrees C. These fall into two regions of the transposase. One, located in the N-terminal segment of OrfAB, lies between or within two regions involved in protein multimerization. The other is located within the C-terminal catalytic domain. The N-terminal mutations resulted in reduced levels of OrfAB* while the C-terminal mutation alone appeared not to affect OrfAB* levels. Combination of N- and C-terminal mutations greatly reduced OrfAB* levels and transposition was concomitantly high even at 42 degrees C. The mechanism by which truncated transposase species are generated and how they intervene to reduce transposition activity is discussed. While transposition activity of these multiply mutated derivatives in vivo was resistant to temperature, the purified OrfAB derivatives retained an inherent temperature-sensitive phenotype in vitro. This clearly demonstrates that temperature sensitivity of IS911 transposition is a complex phenomenon with several mechanistic components. These results have important implications for the several other transposons and insertion sequences whose transposition has also been shown to be temperature-sensitive.

IS911 partial transposition products and their processing by the Escherichia coli RecG helicase

Insertion of bacterial insertion sequence IS911 can often be directed to sequences resembling its ends. We have investigated this type of transposition and shown that it can occur via cleavage of a single end and its targeted transfer next to another end. The single end transfer (SET) events generate branched DNA molecules that contain a nicked Holliday junction and can be considered as partial transposition products. Our results indicate that these can be processed by the Escherichia coli host independently of IS911-encoded proteins. Such resolution depends on the presence of homologous DNA regions neighbouring the cross-over point in the SET molecule. Processing is often accompanied by sequence conversion between donor and target sequences, suggesting that branch migration is involved. We show that resolution is greatly reduced in a recG host. Thus, the branched DNA-specific helicase, RecG, involved in processing of potentially lethal DNA structures such as stalled replication forks, also intervenes in the resolution of partial IS911 transposition products.

Requirement of IS911 replication before integration defines a new bacterial transposition pathway

Movement of transposable elements is often accompanied by replication to ensure their proliferation. Replication is associated with both major classes of transposition mechanisms: cut-and-paste and cointegrate formation (paste-and-copy). Cut-and-paste transposition is often activated by replication of the transposon, while in cointegrate formation replication completes integration. We describe a novel transposition mechanism used by insertion sequence IS911, which we call copy-and-paste. IS911 transposes using a circular intermediate (circle), which then integrates into a target. We demonstrate that this is derived from a branched intermediate (figure-eight) in which both ends are joined by a single-strand bridge after a first-strand transfer. In vivo labelling experiments show that the process of circle formation is replicative. The results indicate that the replication pathway not only produces circles from figure-eight but also regenerates the transposon donor plasmid. To confirm the replicative mechanism, we have also used the Escherichia coli terminators (terC) which, when bound by the Tus protein, inhibit replication forks in a polarised manner. Finally, we demonstrate that the primase DnaG is essential, implicating a host-specific replication pathway.

Host processing of branched DNA intermediates is involved in targeted transposition of IS911

A simplified system using bacterial insertion sequence IS911 has been developed to investigate targeted insertion next to DNA sequences resembling IS ends. We show here that these IR-targeted events occur by an unusual mechanism. In the circular IS911 transposition intermediate the two IRs are abutted to form an IR/IR junction. IR-targeted insertion involves transfer of a single end of the junction to the target IR to generate a branched DNA structure. The single-end transfer (SET) intermediate, but not the final insertion product, can be detected in an in vitro reaction. SET intermediates must be processed by the bacterial host to obtain the final insertion products. Sequence analysis of these IR-targeted insertion products and of those obtained in vivo revealed high levels of DNA sequence conversion in which mutations from one IR were transferred to another. These sequence changes cannot be explained by the classic transposition pathway. A model is presented in which the four-way Holliday-like junction created by SET is processed by host-mediated branch migration, resolution, repair and replication. This pathway resembles those described for processing other branched DNA structures such as stalled replication forks.

The helix-turn-helix motif of bacterial insertion sequence IS911 transposase is required for DNA binding

The transposase of IS911, a member of the IS3 family of bacterial insertion sequences, is composed of a catalytic domain located at its C-terminal end and a DNA binding domain located at its N-terminal end. Analysis of the transposases of over 60 members of the IS3 family revealed the presence of a helix-turn-helix (HTH) motif within the N-terminal region. Alignment of these potential secondary structures further revealed a completely conserved tryptophan residue similar to that found in the HTH motifs of certain homeodomain proteins. The analysis also uncovered a similarity between the IS3 family HTH and that of members of the LysR family of bacterial transcription factors. This information was used to design site-directed mutations permitting an assessment of its role in transposase function. A series of in vivo and in vitro tests demonstrated that the HTH domain is important in directing the transposase to bind the terminal inverted repeats of IS911.

Gene conversion in transposition of Escherichia coli element IS30

The mobile element IS30 has dual target specificity, since it can integrate adjacent to the inverted repeat (IR) of another IS30 copy or into hot-spot sequences characterized by a well-defined consensus showing no similarity to the ends of the element. The result of such integrations into these targets is different, as gene conversion events take place frequently during insertion next to an IR end, while this phenomenon has never been observed in targeting hot-spot sequences. Conversion events in IR-targeting cannot be explained exclusively by the activity of the transposase, but suggest the involvement of the homologous recombination and repair machinery of the host cell. Here, we show that the homology between the donor and target sequences is required for conversion and the starting point of the process is the site of integration. The frequency of conversion depends on the distance of mutations from the end of the targeted element. Remarkable bias is found in the role of donor and target DNA, since generally the donor sequence is converted depending on the target. Conversion was shown to occur also without formation of transposition products. All these data are consistent with the idea of the establishment, migration and resolution of a Holliday-like cruciform structure, which can be responsible for conversion events. To explain the variety of conversion products in IR-targeting, a molecular model has been proposed and discussed.

The IS1111 family members IS4321 and IS5075 have subterminal inverted repeats and target the terminal inverted repeats of Tn21 family transposons

IS5075 and IS4321 are closely related (93.1% identical) members of the IS1111 family that target a specific position in the 38-bp terminal inverted repeats of Tn21 family transposons and that are inserted in only one orientation. They are 1,327 bp long and have identical ends consisting of short inverted repeats of 12 bp with an additional 7 bp (TAATGAG) or 6 bp (AATGAG) to the left of the left inverted repeats and 3 bp (AGA) or 4 bp (AGAT) to the right of the right inverted repeat. Circular forms of IS5075 and IS4321 in which the inverted repeats are separated by abutting terminal sequences (AGATAATGAG) were detected. A similar circular product was found for the related ISPa11. Transposition of IS4321 into the 38-bp target site was detected, but a flanking duplication was not generated. The precisely reconstituted target site was also identified. Over 50 members of the IS1111 family were identified. They encode related transposases, have related inverted repeats, and include related bases that lie outside these inverted repeats. In some, the flanking bases number 5 or 6 on the left and 4 or 3 on the right. Specific target sites were found for several of these insertion sequence (IS) elements. IS1111 family members therefore differ from the majority of IS elements, which are characterized by terminal inverted repeats and a target site duplication, and from members of the related IS110 family, which do not have obvious inverted repeats near their termini.

Transposition in Lactobacillus delbrueckii subsp. bulgaricus: identification of two thermosensitive replicons and two functional insertion sequences

In this report, it is shown that the rolling circle replicon pG(+)host and the theta replicon pIP501 are thermosensitive in Lactobacillus delbrueckii subsp. bulgaricus (Lactobacillus bulgaricus). Using a pIP501 derivative as a delivery vector for six insertion sequences originating from lactic acid bacteria, it is shown that IS1223 and IS1201 transpose in L. bulgaricus.

Detection and analysis of transpositionally active head-to-tail dimers in three additional Escherichia coli IS elements

This study demonstrates that Escherichia coli insertion elements IS3, IS150 and IS186 are able to form transpositionally active head-to-tail dimers which show similar structure and transpositional activity to the dimers of IS2, IS21 and IS30. These structures arise by joining of the left and right inverted repeats (IRs) of two elements. The resulting junction includes a spacer region (SR) of a few base pairs derived from the flanking sequence of one of the reacting IRs. Head-to-tail dimers of IS3, IS150 and IS186 are unstable due to their transpositional activity. They can be resolved in two ways that seem to form a general rule for those elements reported to form dimers. One way is a site-specific process (dimer dissolution) which is accompanied by the loss of one IS copy along with the SR. The other is 'classical' transposition where the joined ends integrate into the target DNA. In intramolecular transposition this often gives rise to deletion formation, whereas in intermolecular transposition it gives rise to replicon fusion. The results presented for IS3, IS150 and IS186 are in accordance with the IS dimer model, which is in turn consistent with models based on covalently closed minicircles.

Genetic variability of the frameshift region in IS911 transposable elements from Escherichia coli clinical isolates

The IS911 bacterial transposable element has been analyzed for its mechanism of transposition and for the way it controls the expression of its genes by programmed -1 translational frameshifting. In the present study the prevalence of IS911 has been determined in the Enterobacteriaceae family and in other Gram-negative bacilli. Three variants, found in Escherichia coli clinical isolates and having mutations in the region implicated in frameshifting, were functionally characterized. All three were altered in their frameshifting and transposition abilities, suggesting that the frameshift region of IS911 may constitute a target for mutations reducing the transposition frequency of this mobile element in natural populations of E. coli.

Escherichia coli insertion sequence IS150: transposition via circular and linear intermediates

IS150, a member of the widespread IS3 family, contains two consecutive out-of-phase open reading frames, orfA and orfB, that partially overlap. These open reading frames encode three proteins, InsA, InsB, and the InsAB protein, which is jointly encoded by both open reading frames by means of programmed translational frameshifting. We demonstrate that the InsAB protein represents the IS150 element's transposase. In vivo, the wild-type IS150 element generates circular excision products and linear IS150 molecules. Circular and linear species have previously been detected with mutant derivatives of other members of the IS3 family. Our finding supports the assumption that these products represent true transposition intermediates of members of this family. Analysis of the molecular nature of these two species suggested that the circular forms are precursors of the linear molecules. Elimination of InsA synthesis within the otherwise intact element led to accumulation of large amounts of the linear species, indicating that the primary role of InsA may be to prevent abortive production of the linear species and to couple generation of these species to productive insertion events.

Development of an in vitro integration assay for the Bacteroides conjugative transposon CTnDOT

Integrated self-transmissible elements called conjugative transposons (CTns) are responsible for the transfer of antibiotic resistance genes in many different species of bacteria. One of the best characterized of these newly recognized elements is the Bacteroides CTn, CTnDOT. CTnDOT is thought to have a circular transfer intermediate that transfers to and integrates into the genome of the recipient cell. Previous investigations of the mechanism of CTnDOT integration have been hindered by the lack of an in vitro system for checking this model of integration and determining whether the CTnDOT integrase alone was sufficient to catalyze the integration reaction or whether host factors might be involved. We report here the development of an in vitro system in which a plasmid containing the joined ends of CTnDOT integrates into a plasmid carrying a CTnDOT target site. To develop this in vitro system, a His-tagged version of the integrase gene of CTnDOT was cloned and shown to be active in vivo. The protein produced by this construct was partially purified and then added to a reaction mixture that contained the joined ends of the circular form of CTnDOT and a plasmid carrying one of the CTnDOT target sites. Integration was demonstrated by using a fairly simple mixture of components, but integration was stimulated by a Bacteroides extract or by purified Escherichia coli integration host factor. The results of this study demonstrate both that the circular form of CTnDOT is the form that integrates into the target site and that host factors are involved in the integration process.

Transposase-dependent formation of circular IS256 derivatives in Staphylococcus epidermidis and Staphylococcus aureus

IS256 is a highly active insertion sequence (IS) element of multiresistant staphylococci and enterococci. Here we show that, in a Staphylococcus epidermidis clinical isolate, as well as in recombinant Staphylococcus aureus and Escherichia coli carrying a single IS256 insertion on a plasmid, IS256 excises as an extrachromosomal circular DNA molecule. First, circles were identified that contained a complete copy of IS256. In this case, the sequence connecting the left and right ends of IS256 was derived from flanking DNA sequences of the parental genetic locus. Second, circle junctions were detected in which one end of IS256 was truncated. Nucleotide sequencing of circle junctions revealed that (i) either end of IS256 can attack the opposite terminus and (ii) the circle junctions vary significantly in size. Upon deletion of the IS256 open reading frame at the 3' end and site-directed mutageneses of the putative DDE motif, circular IS256 molecules were no longer detectable, which implicates the IS256-encoded transposase protein with the circularization of the element.

A target specificity switch in IS911 transposition: the role of the OrfA protein

The role played by insertion sequence IS911 proteins, OrfA and OrfAB, in the choice of a target for insertion was studied. IS911 transposition occurs in several steps: synapsis of the two transposon ends (IRR and IRL); formation of a figure-of-eight intermediate where both ends are joined by a single-strand bridge; resolution into a circular form carrying an IRR-IRL junction; and insertion into a DNA target. In vivo, with OrfAB alone, an IS911-based transposon integrated with high probability next to an IS911 end located on the target plasmid. OrfA greatly reduced the proportion of these events. This was confirmed in vitro using a transposon with a preformed IRR-IRL junction to examine the final insertion step. Addition of OrfA resulted in a large increase in insertion frequency and greatly increased the proportion of non-targeted insertions. The intermolecular reaction leading to targeted insertion may resemble the intramolecular reaction involving figure-of-eight molecules, which leads to the formation of circles. OrfA could, therefore, be considered as a molecular switch modulating the site-specific recombination activity of OrfAB and facilitating dispersion of the insertion sequence (IS) to 'non-homologous' target sites.

Characterization of ISRgn1, a novel insertion sequence of the IS3 family isolated from a bacteriocin-negative mutant of Ruminococcus gnavus E1

ISRgn1, an insertion sequence of the IS3 family, has been identified in the genome of a bacteriocin-negative mutant of Ruminococcus gnavus E1. The copy number of ISRgn1 in R. gnavus E1, as well as its distribution among phylogenetically E1-related strains, has been determined. Results obtained suggest that ISRgn1 is not indigenous to the R. gnavus phylogenetic group but that it can transpose in this bacterium.

Diversity of Tn4001 transposition products: the flanking IS256 elements can form tandem dimers and IS circles

We show that both flanking IS256 elements carried by transposon Tn4001 are capable of generating head-to-tail tandem copies and free circular forms, implying that both are active. Our results suggest that the tandem structures arise from dimeric copies of the donor or vector plasmid present in the population by a mechanism in which an IS256 belonging to one Tn4001 copy attacks an IS256 end carried by the second Tn4001 copy. The resulting structures carry abutted left (inverted left repeat [IRL]) and right (inverted right repeat [IRR]) IS256 ends. Examination of the junction sequence suggested that it may form a relatively good promoter capable of driving transposase synthesis in Escherichia coli. This behavior resembles that of an increasing number of bacterial insertion sequences which generate integrative junctions as part of the transposition cycle. Sequence analysis of the IRL-IRR junctions demonstrated that attack of one end by the other is largely oriented (IRL attacks IRR). Our experiments also defined the functional tips of IS256 as the tips predicted from sequence alignments, confirming that the terminal 4 bp at each end are indeed different. The appearance of these multiple plasmid and transposon forms indicates that care should be exercised when Tn4001 is used in transposition mutagenesis. This is especially true when it is used with naturally transformable hosts, such as Streptococcus pneumoniae, in which reconstitution of the donor plasmid may select for higher-order multimers.

Transient promoter formation: a new feedback mechanism for regulation of IS911 transposition

IS911 transposition involves a free circular transposon intermediate where the terminal inverted repeat sequences are connected. Transposase synthesis is usually driven by a weak promoter, p(IRL), in the left end (IRL). Circle junction formation creates a strong promoter, p(junc), with a -35 sequence located in the right end and the -10 sequence in the left. p(junc) assembly would permit an increase in synthesis of transposase from the transposon circle, which would be expected to stimulate integration. Insertion results in p(junc) disassembly and a return to the low p(IRL)- driven transposase levels. We demonstrate that p(junc) plays an important role in regulating IS911 transposition. Inactivation of p(junc) strongly decreased IS911 transposition when transposase was produced in its natural configuration. This novel feedback mechanism permits transient and controlled activation of integration only in the presence of the correct (circular) intermediate. We have also investigated other members of the IS3 and other IS families. Several, but not all, IS3 family members possess p(junc) equivalents, underlining that the regulatory mechanisms adopted to fine-tune transposition may be different.

The terminal inverted repeats of IS911: requirements for synaptic complex assembly and activity

The bacterial insertion sequence IS911 transposes via a covalently closed circular intermediate. Circle formation involves transposase-mediated pairing of both insertion sequence ends. While full-length transposase, OrfAB, binds poorly in vitro to IS911 DNA fragments carrying a copy of the IS911 end, truncated protein derivatives carrying the first 135 (OrfAB[1-135]) or 149 (OrfAB[1-149]) amino acid residues bind efficiently. They generate a paired-end complex containing two such fragments which resembles that expected for the first synaptic complex. Shorter protein derivatives lacking a region involved in multimerisation do not form these complexes but modify the binding of OrfAB[1-135] and OrfAB[1-149]. DNaseI footprinting demonstrated that OrfAB[1-149] protects a sub-terminal (internal) region of the inverted repeats which includes two blocks of sequence (beta and gamma) conserved between the left (IRL) and right (IRR) ends. DNA binding assays in vitro and measurement of recombination activity in vivo of sequential deletion derivatives of the two inverted repeats suggested a model in which the N-terminal region of OrfAB binds the conserved boxes beta and gamma in a sequence-specific manner and anchors the two insertion sequence ends into a paired-end complex. The external region of the inverted repeat is proposed to contact the C-terminal transposase domain carrying the catalytic site.

Transposition of Tn4451 and Tn4453 involves a circular intermediate that forms a promoter for the large resolvase, TnpX

Tn4451 is the paradigm element of a family of mobilizable chloramphenicol resistance transposons from Clostridium perfringens and Clostridium difficile. The unique feature of these 6.3 kb elements is that their excision to form a circular molecule is mediated by TnpX, a member of the large resolvase family of site-specific recombinases. By optimizing the transposition assay system in Escherichia coli, we showed that Tn4453a from C. difficile transposed at a higher frequency than the C. perfringens element, Tn4451, and that transposition of both Tn4451 and Tn4453a was significantly enhanced by the provision of a multicopy tnpX gene in trans. The complete nucleotide sequence of Tn4453a was determined, but its comparison with Tn4451 did not reveal why it transposed at a higher frequency. Using experiments involving a chromosomal derivative of Tn4453a, we have confirmed that the circular form is the transposition intermediate. As the tnpX gene is located very close to one end of these elements, primer extension analysis was used to determine the transcription start point. The results showed that the formation of the circular intermediate creates a strong tnpX promoter, which consists of a -10 box originally located at the left end of the transposon and a -35 box originally located at the right end. The data provide strong evidence that transcription of tnpX is likely to occur from the non-replicating circular intermediate, which would facilitate the subsequent insertion of the transient circular molecule. It is postulated that, when the transposon is in an integrated state, transcription of tnpX would depend on the presence of an appropriately spaced -35 sequence in the DNA flanking the insertion site or the presence of an alternative upstream promoter.

Characterization of a Tn5 pre-cleavage synaptic complex

Protein catalyzed DNA rearrangements typically require assembly of complex nucleoprotein structures. In transposition and integration reactions, these structures, termed synaptic complexes, are mandatory for catalysis. We characterize the Tn5 pre-cleavage synaptic complex, the simplest transposition complex described to date. We identified this complex by gel retardation assay using short, linear fragments and have shown that it contains a dimer of transposase, two DNA molecules, and is competent for DNA cleavage in the presence of Mg(2+). We also used hydroxyl radical footprinting and interference techniques to delineate the protein-DNA contacts made in the Tn5 synaptic and monomer complexes. All positions (except position 1) of the end sequence are contacted by transposase in the synaptic complex. We have determined that positions 2-5 of the end sequence are specifically required for synaptic complex formation as they are not required for monomer complex formation. In addition, in the synaptic complex, there is a strong, local distortion centered around position 1 which likely facilitates cleavage.

IS1294, a DNA element that transposes by RC transposition

IS1294, found on the ColD-like resistance plasmid pUB2380, is IS91-like. It is an active 1.7-kb insertion sequence that lacks terminal inverted repeats, displays insertion-site specificity, and does not generate direct repeats of the target site. The element has one large open reading frame, tnp(1294), encoding a transposase of 351 amino acids, related to members of the REP family of replication proteins used by RC-plasmids of gram-positive bacteria. IS1294 transposes using rolling-circle replication, initiated at one end of the element, oriIS, and terminated at the other, terIS. oriIS and terIS are highly conserved among like IS elements. oriIS resembles the leading strand replication origins of RC-plasmids; terIS resembles a rho-independent transcription terminator. IS1294 mediates not only its own transposition, but also sequences adjacent to terIS. A transposition model for IS1294 and related elements, involving rolling-circle replication and single-strand DNA intermediates, is presented.

Transposition in Lactobacillus sakei: inactivation of a second lactocin S operon by the insertion of IS1520, a new member of the IS3 family of insertion sequences

The analysis of spontaneous bacteriocin-negative mutants has led to the identification and characterization of a new, transpositionally active, insertion sequence of the IS3 family in the lactocin-S-producing Lactobacillus sakei strain L45. The element, which has been designated IS1520, is 1302 bp long with 10 bp perfect inverted repeat ends and generates direct repeats of a trinucleotide of target sequence upon transposition to the lactocin S locus. IS1520 encodes two consecutive, partially overlapping, major ORFs, which are frameshifted in a manner typical of the IS3 family. Despite a low overall DNA sequence similarity, the putative frameshifting region of IS1520 is highly similar to the corresponding region of IS1163, which is a related element previously shown to be active in L. sakei L45.

The role of tandem IS dimers in IS911 transposition

Using a combined in vivo and in vitro approach, we demonstrated that the transposition products generated by IS911 from a dimeric donor plasmid are different from those generated from a plasmid monomer. When carried by a monomeric plasmid donor, free IS911 transposon circles are generated by intra-IS recombination in which one IS end undergoes attack by the other. These represent transposition intermediates that undergo integration using the abutted left (IRL) and right (IRR) ends of the element, the active IRR-IRL junction, to generate simple insertions. In contrast, the two IS911 copies carried by a dimeric donor plasmid not only underwent intra-IS recombination to generate transposon circles but additionally participated in inter-IS recombination. This also creates an active IRR-IRL junction by generating a head-to-tail IS tandem dimer ([IS]2) in which one of the original plasmid backbone copies is eliminated in the formation of the junction. Both transposon circles and IS tandem dimers are generated from an intermediate in which two transposon ends are retained by a single strand joint to generate a figure 8 molecule. Inter-IS figure 8 molecules generated in vitro could be resolved into the [IS]2 form following introduction into a host strain by transformation. Resolution did not require IS911 transposase. The [IS]2 structure was stable in the absence of transposase but was highly unstable in its presence both in vivo and in vitro. Previous studies had demonstrated that the IRR-IRL junction promotes efficient intermolecular integration and intramolecular deletions both in vivo and in vitro. Integration of the [IS]2 derivative would result in a product that resembles a co-integrate structure. It is also shown here that the IRR-IRL junction of the [IS]2 form and derivative structures can specifically target one of the other ends in an intramolecular transposition reaction to generate transposon circles in vitro. These results not only demonstrate that IS911 (and presumably other members of the IS3 family) is capable of generating a range of transposition products, it also provides a mechanistic framework which explains the formation and activity of such structures previously observed for several other unrelated IS elements. This behaviour is probably characteristic of a large number of IS elements.

IS911 transposition is regulated by protein-protein interactions via a leucine zipper motif

Efficient intermolecular transposition of bacterial insertion sequence IS911 involves the activities of two element-encoded proteins: the transposase, OrfAB, and a regulatory factor, OrfA. OrfA shares the majority of its amino acid sequence with the N-terminal part of OrfAB. This includes a putative helix-turn-helix and three of four heptads of a leucine zipper motif. OrfA strongly stimulates OrfAB-mediated intermolecular transposition both in vivo and in vitro. The present results support the notion that this is accomplished by direct interaction between these two proteins via the leucine zipper. We used both a genetic approach, based on gene fusions with phage lambda repressor, and a physical approach, involving co-immunoprecipitation, to show that OrfA not only undergoes oligomerisation but is capable of engaging with OrfAB to form heteromultimers, and that the leucine zipper is necessary for both types of interaction. Furthermore, mutation of the leucine zipper in OrfA inactivated its regulatory function. Previous observations demonstrated that the integrity of the leucine zipper motif was also important for OrfAB binding to the IS911 terminal inverted repeats. Here, we show, in gel shift experiments, using a derivative of OrfAB deleted for the C-terminal catalytic domain, OrfAB[1-149], that the protein is capable of pairing two inverted repeats to generate a species resembling a "synaptic complex". Preincubation of OrfAB[1-149] with OrfA dramatically reduced formation of this complex and favored formation of an alternative complex devoid of OrfA. Together these results suggest that OrfA exerts its regulatory effect by interacting transiently with OrfAB via the leucine zipper and modifying OrfAB binding to the inverted repeats.

Description and characterization of IS994, a putative IS3 family insertion sequence from the salmon pathogen, Renibacterium salmoninarum

Renibacterium salmoninarum, a slowly growing, Gram-positive bacterium, is responsible for bacterial kidney disease in salmonid fishes world-wide. To date, no mobile genetic elements have been reported for this pathogen. Here, we describe the first insertion sequence (IS) identified from R. salmoninarum. This element, IS994, has a significant predicted amino acid sequence homology (64.8 and 71.9%) to the two open reading frames encoding the transposase of IS6110 of Mycobacterium tuberculosis. Protein parsimony and protein distance matrix analyses show that IS994 is a member of group IS51 of the IS3 family. From a conservative estimate, there are at least 17 chromosomal insertions of IS994 or closely related elements. Sequence analysis of seven of these loci reveals single nucleotide polymorphisms throughout the element (including the terminal inverted repeats), a 15bp insertion in three of the seven loci, and an absence of flanking direct repeats or conserved insertion site. Restriction fragment length polymorphism analysis of XbaI-digested chromosomal DNA shows variations among European and North American isolates, indicating that IS994 may be a useful molecular marker for epizootiological studies.

Hairpin formation in Tn5 transposition

The initial chemical steps in Tn5 transposition result in blunt end cleavage of the transposon from the donor DNA. We demonstrate that this cleavage occurs via a hairpin intermediate. The first step is a 3' hydrolytic nick by transposase. The free 3'OH then attacks the phosphodiester bond on the opposite strand, forming a hairpin at the transposon end. In addition to forming precise hairpins, Tn5 transposase can form imprecise hairpins. This is the first example of imprecise hairpin formation on transposon end DNA. To undergo strand transfer, the hairpin must to be resolved by a transposase-catalyzed hydrolytic cleavage. We show that both precise and imprecise hairpins are opened by transposase. A transposition mechanism utilizing a hairpin intermediate allows a single transposase active site to cleave both 3' and 5' strands without massive protein/DNA rearrangements.

Integrating DNA: transposases and retroviral integrases

Transposable elements appear quite disparate in their organization and in the types of genetic rearrangements they promote. In spite of this diversity, retroviruses and many transposons of both prokaryotes and eukaryotes show clear similarities in the chemical reactions involved in their transposition. This is reflected in the enzymes, integrases and transposases, that catalyze these reactions and that are essential for the mobility of the elements. In this chapter, we examine the structure-function relationships between these enzymes and the different ways in which the individual steps are assembled to produce a complete transposition cycle.

Formation and transposition of the covalently closed IS30 circle: the relation between tandem dimers and monomeric circles

In the present study, we demonstrate that a circular IS30 element acts as an intermediate for simple insertion. Covalently closed IS and Tn circles constructed in vitro are suitable for integration into the host genome. Minicircle integration displays all the characteristics of transpositional fusion mediated by the (IS30 )2 dimer regarding target selection and target duplication. Evidence is provided for in vivo circularization of the element located either on plasmids or on the genome. It is shown that circle formation can occur through alternative pathways. One of them is excision of IS30 from a hot spot via joining the IRs. This reaction resembles the site-specific dimerization that leads to (IS30 )2 establishment. The other process is the dissolution of (IS30 )2 dimer, when the element is excised from an IR-IR joint. These pathways differ basically in the fate of the donor replicon: only dimer dissolution gives rise to resealed donor backbone. Analysis of minicircles and the rearranged donor replicons led us to propose a molecular model that can account for differences between the circle-generating processes. Our focus was to the dissolution of IR-IR joints located on the host genome, because these events promoted extensive genomic rearrangements and accompanied minicircle formation. The results present the possibility of host genome reorganization by IS30-like transposition.

Excision of IS492 requires flanking target sequences and results in circle formation in Pseudoalteromonas atlantica

The gram-negative marine bacterium Pseudoalteromonas atlantica produces extracellular polysaccharide (EPS) that is important in biofilm formation by this bacterium. Insertion and precise excision of IS492 at a locus essential for extracellular polysaccharide production (eps) controls phase variation of EPS production in P. atlantica. Examination of IS492 transposition in P. atlantica by using a PCR-based assay revealed a circular form of IS492 that may be an intermediate in transposition or a terminal product of excision. The DNA sequence of the IS492 circle junction indicates that the ends of the element are juxtaposed with a 5-bp spacer sequence. This spacer sequence corresponds to the 5-bp duplication of the chromosomal target sequence found at all IS492 insertion sites on the P. atlantica chromosome that we identified by using inverse PCR. IS492 circle formation correlated with precise excision of IS492 from the P. atlantica eps target sequence when introduced into Escherichia coli on a plasmid. Deletion analyses of the flanking host sequences at the eps insertion site for IS492 demonstrated that the 5-bp duplicated target sequence is essential for precise excision of IS492 and circle formation in E. coli. Excision of IS492 in E. coli also depends on the level of expression of the putative transposase, MooV. A regulatory role for the circular form of IS492 is suggested by the creation of a new strong promoter for expression of mooV by the joining of the ends of the insertion sequence element at the circle junction.

IS911 transposon circles give rise to linear forms that can undergo integration in vitro

High levels of expression of the transposase OrfAB of bacterial insertion sequence IS911 leads to the formation of excised transposon circles, in which the two abutted ends are separated by 3 bp. Initially, OrfAB catalyses only single-strand cleavage at one 3' transposon end and strand transfer of that end to the other. It is believed that this molecule, in which both transposon ends are held together in a single-strand bridge, is then converted to the circular form by the action of host factors. The transposon circles can be integrated efficiently into an appropriate target in vivo and in vitro in the presence of OrfAB and a second IS911 protein OrfA. In the results reported here, we have identified linear transposon forms in vivo from a transposon present in a plasmid, raising the possibility that IS911 can also transpose using a cut-and-paste mechanism. However, the linear species appeared not to be derived directly from the plasmid-based copy by direct double-strand cleavages at both ends, but from preformed excised transposon circles. This was confirmed further by the observation that OrfAB can cleave a cloned circle junction both in vivo and in vitro by two single-strand cleavages at the 3' transposon ends to generate a linear transposon form with a 3'-OH and a three-nucleotide 5' overhang at the ends. Moreover, while significantly less efficient than the transposon circle, a precleaved linear transposon underwent detectable levels of integration in vitro. The possible role of such molecules in the IS911 transposition pathway is discussed.

Target joining of duplicated insertion sequence IS21 is assisted by IstB protein in vitro

Tandemly repeated insertion sequence IS21, located on a suicide plasmid, promoted replicon fusion with bacteriophage lambda in vitro in the presence of ATP. This reaction was catalyzed in a cell extract containing the 45-kDa IstA protein (cointegrase) and the 30-kDa IstB helper protein of IS21 after both proteins had been overproduced in Escherichia coli. Without IstB, replicon fusion was inefficient and did not produce the 4-bp target duplications typical of IS21.

A three-way junction and constituent stem-loops as the stimulator for programmed -1 frameshifting in bacterial insertion sequence IS911

Several signals are required for the programmed frameshifting in translation of IS911 mRNA. These include a Shine Dalgarno (SD)-like sequence, a slippery sequence of six adenine residues and a guanine residue (A6G) and a 3' secondary structure. The structure of the mRNA containing these elements was investigated using chemical and enzymatic probing. The probing data show that the 3' structure is a three-way junction of stems. The function of the three-way junction was investigated by mutagenesis. Disrupting the stability of the structure greatly affects frameshifting and transposition levels as tested by separate in vivo assays. Structural probing and thermal melting profiles indicate that the disrupted three-way junctions have altered structures.

Multiple oligomerisation domains in the IS911 transposase: a leucine zipper motif is essential for activity

Structure-function relationships involved in oligomerisation of the transposase OrfAB of the bacterial insertion sequence IS911 have been investigated. Site-directed mutagenesis and sequential deletion coupled with immunoprecipitation have led to the definition of three regions of the protein capable of promoting multimerisation. These include a region predicted to assume a coiled-coil conformation, which is shown to be essential for activity, promoting correct multimerisation of the N-terminal domain of OrfAB and sequence-specific binding to the IS911 terminal inverted repeats mediated by this domain. This region presents the structural and functional characteristics of the leucine zipper motif described in eukaryotic proteins. The two other regions are located further towards the C-terminal end of the protein, adjacent to the leucine zipper and in the region that carries the conserved catalytic DD(35)E motif.

Identification and characterization of IS1411, a new insertion sequence which causes transcriptional activation of the phenol degradation genes in Pseudomonas putida

A new insertion sequence (IS element), IS1411, was identified downstream of the phenol degradation genes pheBA that originated from plasmid DNA of Pseudomonas sp. strain EST1001. According to sequence analysis, IS1411 belongs to a new family of IS elements that has recently been named the ISL3 family (J. Mahillon and M. Chandler, Microbiol. Mol. Biol. Rev. 62:725-774, 1998). IS1411 generates 8-bp duplication of the target DNA and carries 24-bp inverted repeats (IRs), highly homologous to the IRs of other IS elements belonging to this family. IS1411 was discovered as a result of insertional activation of promoterless pheBA genes in Pseudomonas putida due to the presence of outward-directed promoters at the left end of IS1411. Both promoters located on the IS element have sequences that are similar to the consensus sequence of Escherichia coli sigma70. IS1411 can produce IS circles, and the circle formation is enhanced when two copies of the element are present in the same plasmid.

Insertion sequences

Insertion sequences (ISs) constitute an important component of most bacterial genomes. Over 500 individual ISs have been described in the literature to date, and many more are being discovered in the ongoing prokaryotic and eukaryotic genome-sequencing projects. The last 10 years have also seen some striking advances in our understanding of the transposition process itself. Not least of these has been the development of various in vitro transposition systems for both prokaryotic and eukaryotic elements and, for several of these, a detailed understanding of the transposition process at the chemical level. This review presents a general overview of the organization and function of insertion sequences of eubacterial, archaebacterial, and eukaryotic origins with particular emphasis on bacterial elements and on different aspects of the transposition mechanism. It also attempts to provide a framework for classification of these elements by assigning them to various families or groups. A total of 443 members of the collection have been grouped in 17 families based on combinations of the following criteria: (i) similarities in genetic organization (arrangement of open reading frames); (ii) marked identities or similarities in the enzymes which mediate the transposition reactions, the recombinases/transposases (Tpases); (iii) similar features of their ends (terminal IRs); and (iv) fate of the nucleotide sequence of their target sites (generation of a direct target duplication of determined length). A brief description of the mechanism(s) involved in the mobility of individual ISs in each family and of the structure-function relationships of the individual Tpases is included where available.

Tn552 transposase catalyzes concerted strand transfer in vitro

The Tn552 transposase, a member of the DDE superfamily of transposase and retroviral integrase proteins, has been expressed in soluble form. The purified protein performs concerted strand transfer in vitro, efficiently pairing two preprocessed transposon ends and inserting them into target DNA. For maximum efficiency, both participating DNA ends must contain the two adjacent transposase-binding sites that are the normal constituents of the Tn552 termini. As is the case with transposition in vivo, the insertions recovered from the reaction in vitro are flanked by repeats of a short target sequence, most frequently 6 bp. The reaction has stringent requirements for a divalent metal ion. Concerted strand transfer is most efficient with Mg2+. Although it stimulates strand transfer overall, Mn2+ promotes uncoupled, single-ended events at the expense of concerted insertions. The simplicity and efficiency of the Tn552 transposition system make it an attractive subject for structural and biochemical studies and a potentially useful genetic tool.