The complex between a four-way DNA junction and T7 endonuclease I

Attenuation of a DNA cruciform by a conserved regulator directs T3SS1 mediated virulence in Vibrio parahaemolyticus

Pathogenic Vibrio species account for 3-5 million annual life-threatening human infections. Virulence is driven by bacterial hemolysin and toxin gene expression often positively regulated by the winged helix-turn-helix (wHTH) HlyU transcriptional regulator family and silenced by histone-like nucleoid structural protein (H-NS). In the case of Vibrio parahaemolyticus, HlyU is required for virulence gene expression associated with type 3 Secretion System-1 (T3SS1) although its mechanism of action is not understood. Here, we provide evidence for DNA cruciform attenuation mediated by HlyU binding to support concomitant virulence gene expression. Genetic and biochemical experiments revealed that upon HlyU mediated DNA cruciform attenuation, an intergenic cryptic promoter became accessible allowing for exsA mRNA expression and initiation of an ExsA autoactivation feedback loop at a separate ExsA-dependent promoter. Using a heterologous E. coli expression system, we reconstituted the dual promoter elements which revealed that HlyU binding and DNA cruciform attenuation were strictly required to initiate the ExsA autoactivation loop. The data indicate that HlyU acts to attenuate a transcriptional repressive DNA cruciform to support T3SS1 virulence gene expression and reveals a non-canonical extricating gene regulation mechanism in pathogenic Vibrio species.

Characterization, genome analysis and in vitro activity of a novel phage vB_EcoA_RDN8.1 active against multi-drug resistant and extensively drug-resistant biofilm-forming uropathogenic Escherichia coli isolates, India

AIM

We aimed to study host range, stability, genome and antibiofilm activity of a novel phage vB_EcoA_RDN8.1 active against multi-drug resistant (MDR) and extensively drug-resistant (XDR) biofilm-forming uropathogenic Escherichia coli isolates.

METHODS AND RESULTS

A novel lytic phage vB_EcoA_RDN8.1 active against UPEC strains resistant to third-generation cephalosporins, fluoroquinolones, aminoglycosides, imipenem, beta-lactamase inhibitor combination and polymyxins was isolated from community raw sewage water of Chandigarh. It exhibited a clear plaque morphology and a burst size of 250. In the time-kill assay, the maximum amount of killing was achieved at MOI 1.0. vB_EcoA_RDN8.1 belongs to the family Autographiviridae, has a genome size of 39.5 kb with a GC content of 51.6%. It was stable over a wide range of temperatures and pH. It was able to inhibit biofilm formation which may be related to an endolysin encoded by ORF 19.

CONCLUSIONS

The vB_EcoA_RDN8.1 is a novel lytic phage that has the potential for inclusion into phage cocktails being developed for the treatment of urinary tract infections (UTIs) caused by highly drug-resistant UPEC.

SIGNIFICANCE AND IMPACT OF THE STUDY

We provide a detailed characterization of a novel lytic Escherichia phage with antibiofilm activity having a potential application against MDR and XDR UPEC causing UTIs.

Junction resolving enzymes use multivalency to keep the Holliday junction dynamic

Holliday junction (HJ) resolution by resolving enzymes is essential for chromosome segregation and recombination-mediated DNA repair. HJs undergo two types of structural dynamics that determine the outcome of recombination: conformer exchange between two isoforms and branch migration. However, it is unknown how the preferred branch point and conformer are achieved between enzyme binding and HJ resolution given the extensive binding interactions seen in static crystal structures. Single-molecule fluorescence resonance energy transfer analysis of resolving enzymes from bacteriophages (T7 endonuclease I), bacteria (RuvC), fungi (GEN1) and humans (hMus81-Eme1) showed that both types of HJ dynamics still occur after enzyme binding. These dimeric enzymes use their multivalent interactions to achieve this, going through a partially dissociated intermediate in which the HJ undergoes nearly unencumbered dynamics. This evolutionarily conserved property of HJ resolving enzymes provides previously unappreciated insight on how junction resolution, conformer exchange and branch migration may be coordinated.

Analysis of the Intrinsically Disordered N-Terminus of the DNA Junction-Resolving Enzyme T7 Endonuclease I: Identification of Structure Formed upon DNA Binding

The four-way (Holliday) DNA junction of homologous recombination is processed by the symmetrical cleavage of two strands by a nuclease. These junction-resolving enzymes bind to four-way junctions in dimeric form, distorting the structure of the junction in the process. Crystal structures of T7 endonuclease I have been determined as free protein, and the complex with a DNA junction. In neither crystal structure was the N-terminal 16-amino acid peptide visible, yet deletion of this peptide has a marked effect on the resolution process. Here we have investigated the N-terminal peptide by inclusion of spin-label probes at unique sites within this region, studied by electron paramagnetic resonance. Continuous wave experiments show that these labels are mobile in the free protein but become constrained on binding a DNA junction, with the main interaction occurring for residues 7-10 and 12. Distance measurements between equivalent positions within the two peptides of a dimer using PELDOR showed that the intermonomeric distances for residues 2-12 are long and broadly distributed in the free protein but are significantly shortened and become more defined on binding to DNA. These results suggest that the N-terminal peptides become more organized on binding to the DNA junction and nestle into the minor grooves at the branchpoint, consistent with the biochemical data indicating an important role in the resolution process. This study demonstrates the presence of structure within a protein region that cannot be viewed by crystallography.

Crystal Structure of a Eukaryotic GEN1 Resolving Enzyme Bound to DNA

We present the crystal structure of the junction-resolving enzyme GEN1 bound to DNA at 2.5 Å resolution. The structure of the GEN1 protein reveals it to have an elaborated FEN-XPG family fold that is modified for its role in four-way junction resolution. The functional unit in the crystal is a monomer of active GEN1 bound to the product of resolution cleavage, with an extensive DNA binding interface for both helical arms. Within the crystal lattice, a GEN1 dimer interface juxtaposes two products, whereby they can be reconnected into a four-way junction, the structure of which agrees with that determined in solution. The reconnection requires some opening of the DNA structure at the center, in agreement with permanganate probing and 2-aminopurine fluorescence. The structure shows that a relaxation of the DNA structure accompanies cleavage, suggesting how second-strand cleavage is accelerated to ensure productive resolution of the junction.

•

GEN1 crystallized with a resolution product containing two perpendicular DNA helices

•

GEN1 shares the FEN1 superfamily fold, with a two-metal ion-containing active site

•

GEN1 forms a dimer that juxtaposes two products in a substrate-like complex

•

A resulting model of a GEN1-junction complex is supported by solution experiments

Holliday junction resolvases

Four-way DNA intermediates, called Holliday junctions (HJs), can form during meiotic and mitotic recombination, and their removal is crucial for chromosome segregation. A group of ubiquitous and highly specialized structure-selective endonucleases catalyze the cleavage of HJs into two disconnected DNA duplexes in a reaction called HJ resolution. These enzymes, called HJ resolvases, have been identified in bacteria and their bacteriophages, archaea, and eukaryotes. In this review, we discuss fundamental aspects of the HJ structure and their interaction with junction-resolving enzymes. This is followed by a brief discussion of the eubacterial RuvABC enzymes, which provide the paradigm for HJ resolvases in other organisms. Finally, we review the biochemical and structural properties of some well-characterized resolvases from archaea, bacteriophage, and eukaryotes.

SIRT1 gene expression upon genotoxic damage is regulated by APE1 through nCaRE-promoter elements

APE1 is recruited to the transcription initiation site of the SIRT1 promoter during early cell response to oxidative stress. This reveals the importance of BER enzyme involvement in controlling specific gene expression at the transcriptional level.

Apurinic/apyrimidinic endonuclease 1 (APE1) is a multifunctional protein contributing to genome stability via repair of DNA lesions via the base excision repair pathway. It also plays a role in gene expression regulation and RNA metabolism. Another, poorly characterized function is its ability to bind to negative calcium responsive elements (nCaRE) of some gene promoters. The presence of many functional nCaRE sequences regulating gene transcription can be envisioned, given their conservation within ALU repeats. To look for functional nCaRE sequences within the human genome, we performed bioinformatic analyses and identified 57 genes potentially regulated by APE1. We focused on sirtuin-1 (SIRT1) deacetylase due to its involvement in cell stress, including senescence, apoptosis, and tumorigenesis, and its role in the deacetylation of APE1 after genotoxic stress. The human SIRT1 promoter presents two nCaRE elements stably bound by APE1 through its N-terminus. We demonstrate that APE1 is part of a multiprotein complex including hOGG1, Ku70, and RNA Pol II, which is recruited on SIRT1 promoter to regulate SIRT1 gene functions during early response to oxidative stress. These findings provide new insights into the role of nCaRE sequences in the transcriptional regulation of mammalian genes.

The importance of the N-terminus of T7 endonuclease I in the interaction with DNA junctions

T7 endonuclease I is a dimeric nuclease that is selective for four-way DNA junctions. Previous crystallographic studies have found that the N-terminal 16 amino acids are not visible, neither in the presence nor in the absence of DNA. We have now investigated the effect of deleting the N-terminus completely or partially. N-terminal deleted enzyme binds more tightly to DNA junctions but cleaves them more slowly. While deletion of the N-terminus does not measurably affect the global structure of the complex, the presence of the peptide is required to generate a local opening at the center of the DNA junction that is observed by 2-aminopurine fluorescence. Complete deletion of the peptide leads to a cleavage rate that is 3 orders of magnitude slower and an activation enthalpy that is 3-fold higher, suggesting that the most important interaction of the peptide is with the reaction transition state. Taken together, these data point to an important role of the N-terminus in generating a central opening of the junction that is required for the cleavage reaction to proceed properly. In the absence of this, we find that a cruciform junction is no longer subject to bilateral cleavage, but instead, just one strand is cleaved. Thus, the N-terminus is required for a productive resolution of the junction.

Structure of d(CGGGTACCCG)4 as a four-way Holliday junction

The crystal structure of the decamer sequence d(CGGGTACCCG)(4) as a four-way Holliday junction has been determined at 2.35 Å resolution. The sequence was designed in order to understand the principles that govern the relationship between sequence and branching structure. It crystallized as a four-way junction structure with an overall geometry similar to those of previously determined Holliday junction structures.

Analysis of conformational changes in the DNA junction-resolving enzyme T7 endonuclease I on binding a four-way junction using EPR

The four-way (Holliday) DNA junction is the central intermediate in homologous recombination. It is ultimately resolved into two nicked-duplex species by the action of a junction-resolving enzyme. These enzymes are highly selective for the structure of branched DNA, yet as a class these proteins impose significant distortion on their target junctions. Bacteriophage T7 endonuclease I selectively binds and cleaves DNA four-way junctions. The protein is an extremely stable dimer, comprising two globular domains joined by a β-strand bridge with each active site including amino acids from both polypeptides. The crystal structure of endonuclease I has been solved both as free protein and in complex with a DNA junction, showing that the protein, as well as the junction, becomes distorted on binding. We have therefore used site-specific spin-labeling in conjunction with EPR distance measurements to analyze induced fit in the binding of endonuclease I to a DNA four-way junction. The results support the change in protein structure as it binds to the junction. In addition, we have examined the structure of wild type and catalytically inactive mutants alone and in complex with DNA. We demonstrate the presence of hitherto undefined metastable conformational states within endonuclease I, showing how these states can be influenced by DNA-junction binding or mutations within the active sites. In addition, we demonstrate a previously unobserved instability in the N-terminal α1-helix upon active site mutation. These studies reveal that structural changes in both DNA and protein occur in the action of this junction-resolving enzyme.

The interaction of four-way DNA junctions with resolving enzymes

Four-way DNA (Holliday) junctions are resolved into duplex species by the action of the junction-resolving enzymes, nucleases selective for the structure of helical branchpoints. These have been isolated from bacteria and their phages, archaea, yeasts and mammals, including humans. They are all dimeric proteins that bind with high selectivity to DNA junctions and generate bilateral cleavage within the lifetime of the DNA-protein complex. Recent success in obtaining X-ray crystal structures of resolving enzymes bound to DNA junctions has revealed how the structural selectivity of these enzymes is achieved.

Comparative gel electrophoresis analysis of helical junctions in RNA

Comparative gel electrophoresis provides information on the relative angles subtended between helical arms at a branchpoint in RNA. It is based upon the comparison of electrophoretic mobility in polyacrylamide gels of species containing two long arms, with the remaining one(s) being significantly shorter. Although the method currently lacks a really well-established basis of physical theory, it is very powerful, yet simple to apply. It has had a number of significant successes in RNA, DNA and DNA-protein complexes, and in all cases to date the results have stood the test of time and eventual comparison with crystallographic analysis.

A rare nucleotide base tautomer in the structure of an asymmetric DNA junction

The single-crystal structure of a DNA Holliday junction assembled from four unique sequences shows a structure that conforms to the general features of models derived from similar constructs in solution. The structure is a compact stacked-X form junction with two sets of stacked B-DNA-type arms that coaxially stack to form semicontinuous duplexes interrupted only by the crossing of the junction. These semicontinuous helices are related by a right-handed rotation angle of 56.5 degrees, which is nearly identical to the 60 degree angle in the solution model but differs from the more shallow value of approximately 40 degrees for previous crystal structures of symmetric junctions that self-assemble from single identical inverted-repeat sequences. This supports the model in which the unique set of intramolecular interactions at the trinucleotide core of the crossing strands, which are not present in the current asymmetric junction, affects both the stability and geometry of the symmetric junctions. An unexpected result, however, is that a highly wobbled A.T base pair, which is ascribed here to a rare enol tautomer form of the thymine, was observed at the end of a CCCC/GGGG sequence within the stacked B-DNA arms of this 1.9 A resolution structure. We suggest that the junction itself is not responsible for this unusual conformation but served as a vehicle for the study of this CG-rich sequence as a B-DNA duplex, mimicking the form that would be present in a replication complex. The existence of this unusual base lends credence to and defines a sequence context for the "rare tautomer hypothesis" as a mechanism for inducing transition mutations during DNA replication.

Role of nucleic acid binding in Sir3p-dependent interactions with chromatin fibers

Recent studies of the mechanisms involved in the regulation of gene expression in eukaryotic organisms depict a highly complex process requiring a coordinated rearrangement of numerous molecules to mediate DNA accessibility. Silencing in Saccharomyces cerevisiae involves the Sir family of proteins. Sir3p, originally described as repressing key areas of the yeast genome through interactions with the tails of histones H3 and H4, appears to have additional roles in that process, including involvement with a DNA binding component. Our in vitro studies focused on the characterization of Sir3p-nucleic acid interactions and their biological functions in Sir3p-mediated silencing using binding assays, EM imaging, and theoretical modeling. Our results suggest that the initial Sir3p recruitment is partially DNA-driven, highly cooperative, and dependent on nucleosomal features other than histone tails. The initial step appears to be rapidly followed by the spreading of silencing using linker DNA as a track.

Analysis of branched nucleic acid structure using comparative gel electrophoresis

Electrophoresis in polyacrylamide gels provides a simple yet powerful means of analyzing the relative disposition of helical arms in branched nucleic acids. The electrophoretic mobility of DNA or RNA with a central discontinuity is determined by the angle subtended between the arms radiating from the branchpoint. In a multi-helical branchpoint, comparative gel electrophoresis can provide a relative measure of all the inter-helical angles and thus the shape and symmetry of the molecule. Using the long-short arm approach, the electrophoretic mobility of all the species with two helical arms that are longer than all others is compared. This can be done as a function of conditions, allowing the analysis of ion-dependent folding of branched DNA and RNA species. Notable successes for the technique include the four-way (Holliday) junction in DNA and helical junctions in functionally significant RNA species such as ribozymes. Many of these structures have subsequently been proved correct by crystallography or other methods, up to 10 years later in the case of the Holliday junction. Just as important, the technique has not failed to date. Comparative gel electrophoresis can provide a window on both fast and slow conformational equilibria such as conformer exchange in four-way DNA junctions. But perhaps the biggest test of the approach has been to deduce the structures of complexes of four-way DNA junctions with proteins. Two recent crystallographic structures show that the global structures were correctly deduced by electrophoresis, proving the worth of the method even in these rather complex systems. Comparative gel electrophoresis is a robust method for the analysis of branched nucleic acids and their complexes.

Interactions between branched DNAs and peptide inhibitors of DNA repair

The RecG helicase of Escherichia coli unwinds both Holliday junction (HJ) and replication fork DNA substrates. Our lab previously identified and characterized peptides (WRWYCR and KWWCRW) that block the activity of RecG on these substrates. We determined that the peptides bind HJ DNA and prevent the binding of RecG. Herein, we present further evidence that the peptides are competitive inhibitors of RecG binding to its substrates. We have generated structural models of interactions between WRWYCR and a junction substrate. Using the fluorescent probe 2-aminopurine, we show that inhibitors interact with highest affinity with HJs (K_d = 14 nM) and ∼4- to 9-fold more weakly with replication fork substrates. The fluorescence assay results agree with the structural model, and predict the molecular basis for interactions between HJ-trapping peptides and branched DNA molecules. Specifically, aromatic amino acids in the peptides stack with bases at the center of the DNA substrates. These interactions are stabilized by hydrogen bonds to the DNA and by intrapeptide interactions. These peptides inhibit several proteins involved in DNA repair in addition to RecG, have been useful as tools to dissect recombination, and possess antibiotic activity. Greater understanding of the peptides’ mechanism of action will further increase their utility.

Structure, flexibility, and mechanism of the Bacillus stearothermophilus RecU Holliday junction resolvase

Here we report a high resolution structure of RecU-Holliday junction resolvase from Bacillus stearothermophilus. The functional unit of RecU is a homodimer that contains a "mushroom" like structure with a rigid cap and two highly flexible loops extending outwards. These loops appear to be highly flexible/dynamic, and presumably are directly involved in DNA binding and holding it for catalysis. Structural modifications of both the protein and DNA upon their interaction are essential for catalysis. An Mg2+ ion is present in each of the two active sites in this homodimeric enzyme, and two water molecules are coordinated with each Mg2+ ion. Our data are consistent with one of these water molecules acting as a nucleophile and the other as a general acid. The identities of the general base and general acid involved in catalysis and the Lewis acid that stabilizes the pentacovalent transition state phosphate ion are proposed. A model for the RecU-Holliday junction DNA complex is also proposed and discussed in the context of DNA binding and cleavage.

The structural basis of Holliday junction resolution by T7 endonuclease I

The four-way (Holliday) DNA junction is the central intermediate in homologous recombination, a ubiquitous process that is important in DNA repair and generation of genetic diversity. The penultimate stage of recombination requires resolution of the DNA junction into nicked-duplex species by the action of a junction-resolving enzyme, examples of which have been identified in a wide variety of organisms. These enzymes are nucleases that are highly selective for the structure of branched DNA. The mechanism of this selectivity has, however, been unclear in the absence of structural data. Here we present the crystal structure of the junction-resolving enzyme phage T7 endonuclease I in complex with a synthetic four-way DNA junction. Although the enzyme is structure-selective, significant induced fit occurs in the interaction, with changes in the structure of both the protein and the junction. The dimeric enzyme presents two binding channels that contact the backbones of the junction's helical arms over seven nucleotides. These interactions effectively measure the relative orientations and positions of the arms of the junction, thereby ensuring that binding is selective for branched DNA that can achieve this geometry.

The stability and characteristics of a DNA Holliday junction switch

A Holliday junction (HJ) consists of four DNA double helices, with a branch point discontinuity at the intersection of the component strands. At low ionic strength, the HJ adopts an open conformation, with four widely spaced arms, primarily due to strong electrostatic repulsion between the phosphate groups on the backbones. At high ionic strength, screening of this repulsion induces a switch to a more compact (closed) junction conformation. Fluorescent labelling with dyes placed on the HJ arms allows this conformational switch to be detected optically using fluorescence resonance energy transfer (FRET), producing a sensitive fluorescent output of the switch state. This paper presents a systematic and quantitative survey of the switch characteristics of such a labelled HJ. A short HJ (arm length 8 bp) is shown to be prone to dissociation at low switching ion concentration, whereas an HJ of arm length 12 bp is shown to be stable over all switching ion concentrations studied. The switching characteristics of this HJ have been systematically and quantitatively studied for a variety of switching ions, by measuring the required ion concentration, the sharpness of the switching transition and the fluorescent output intensity of the open and closed states. This stable HJ is shown to have favourable switch characteristics for a number of inorganic switching ions, making it a promising candidate for use in nanoscale biomolecular switch devices.

Selective binding of meiosis-specific yeast Hop1 protein to the holliday junctions distorts the DNA structure and its implications for junction migration and resolution

Saccharomyces cerevisiae HOP1, which encodes a component of synaptonemal complex (SC), plays an important role in both gene conversion and crossing over between homologs, as well as enforces meiotic recombination checkpoint control over the progression of recombination intermediates. In hop1Delta mutants, meiosis-specific double-strand breaks (DSBs) are reduced to 10% of the wild-type level, and at aberrantly late times, these DSBs are processed into inter-sister recombination intermediates. However, the underlying mechanism by which Hop1 protein regulates these nuclear events remains obscure. Here we show that Hop1 protein interacts selectively with the Holliday junction, changes its global conformation and blocks the dissolution of the junction by a RecQ helicase. The Holliday junction-Hop1 protein complexes are significantly more stable at higher ionic strengths and molar excess of unlabeled competitor DNA than complexes containing other recombination intermediates. Structural analysis of the Holliday junction using 2-aminopurine fluorescence emission, DNase I footprinting and KMnO4 probing provide compelling evidence that Hop1 protein binding induces significant distortion at the center of the Holliday junction. We propose that Hop1 protein might coordinate the physical monitoring of meiotic recombination intermediates with the process of branch migration of Holliday junction.

Runaway domain swapping in amyloid-like fibrils of T7 endonuclease I

Amyloid fibrils are associated with >20 fatal human disorders, including Alzheimer's, Parkinson's, and prion diseases. Knowledge of how soluble proteins assemble into amyloid fibrils remains elusive despite its potential usefulness for developing diagnostics and therapeutics. In at least some fibrils, runaway domain swapping has been proposed as a possible mechanism for fibril formation. In runaway domain swapping, each protein molecule swaps a domain into the complementary domain of the adjacent molecule along the fibril. Here we show that T7 endonuclease I, a naturally domain-swapped dimeric protein, can form amyloid-like fibrils. Using protein engineering, we designed a double-cysteine mutant that forms amyloid-like fibrils in which molecules of T7 endonuclease I are linked by intermolecular disulfide bonds. Because the disulfide bonds are designed to form only at the domain-swapped dimer interface, the resulting covalently linked fibrils show that T7 endonuclease I forms fibrils by a runaway domain swap. In addition, we show that the disulfide mutant exists in two conformations, only one of which is able to form fibrils. We also find that domain-swapped dimers, if locked in a close-ended dimeric form, are unable to form fibrils. Our study provides strong evidence for runaway domain swapping in the formation of an amyloid-like fibril and, consequently, a molecular explanation for specificity and stability of fibrils. In addition, our results suggest that inhibition of fibril formation for domain-swapped proteins may be achieved by stabilizing domain-swapped dimers.

Structural recognition between a four-way DNA junction and a resolving enzyme

Resolving enzymes bind highly selectively to four-way DNA junctions, but the mechanism of this structural specificity is poorly understood. In this study, we have explored the role of interactions between the dimeric enzyme and the helical arms of the junction, using junctions with either shortened arms, or circular permutation of arms. We find that DNA-protein contacts in the arms containing the 5' ends of the continuous strands are very important, conferring a significant level of sequence discrimination upon both the choice of conformer and the order of strand cleavage. We have exploited these properties to obtain hydroxyl radical footprinting data on endonuclease I-junction complexes that are not complicated by the presence of alternative conformers, with results that are in good agreement with the arm permutation and shortening experiments. Substitution of phosphate groups at the center of the junction reveals the importance of electrostatic interactions at the point of strand exchange in the complex. Our data show that the form of the complex between endonuclease I and a DNA junction depends on the core of the junction and on interactions with the first six base-pairs of the arms containing the 5' ends of the continuous strands.

The stacked-X DNA Holliday junction and protein recognition

The crystal structure of the four-stranded DNA Holliday junction has now been determined in the presence and absence of junction binding proteins, with the extended open-X form of the junction seen in all protein complexes, but the more compact stacked-X structure observed in free DNA. The structures of the stacked-X junction were crystallized because of an unexpected sequence dependence on the stability of this structure. Inverted repeat sequences that contain the general motif NCC or ANC favor formation of stacked-X junctions, with the junction cross-over occurring between the first two positions of the trinucleotides. This review focuses on the sequence dependent structure of the stacked-X junction and how it may play a role in structural recognition by a class of dimeric junction resolving enzymes that themselves show no direct sequence recognition.

DNA-induced dimerization of poly(ADP-ribose) polymerase-1 triggers its activation

In response to DNA strand breaks in the genome of higher eukaryotes, poly(ADP-ribose)polymerase 1 (PARP-1) catalyses the covalent attachment of ADP-ribose units from NAD(+) to various nuclear acceptor proteins including PARP-1 itself. This post-translational modification affecting proteins involved in chromatin architecture and in DNA repair plays a critical role in cell survival as well as in caspase-independent cell death. Although PARP-1 has been best-studied for its role in genome stability, several recent reports have demonstrated its role in the regulation of transcription. In this study, fluorescence spectroscopy and biochemical techniques are used to investigate the association of the amino-terminal DNA-binding domain of human PARP-1 (hPARP-1 DBD) with various DNA substrates, characterized by different DNA ends and sequence features (5'- or 3'-recessed end, double strands, telomeric repeats, and the palindromic sequence of a Not I restriction site). The correlation between the binding mode of hPARP-1 DBD to the DNA oligoduplexes and the enzymatic activation of hPARP-1 is analyzed. We show that hPARP-1 DBD binds a 5'-recessed DNA end cooperatively with a stoichiometry of two proteins per DNA molecule. In contrast, a 1:1 stoichiometry is found in the presence of a 3'-recessed end and double-strand DNA. A palindromic structure like the Not I restriction site is shown to induce protein dimerization and high enzymatic activation, suggesting that it can represent a recognition element for hPARP-1 in undamaged cells. Protein dimerization is found to be a requisite for high enzymatic activity. Taken together, our data allow further characterization of the features of hPARP-1 recognition in damaged cells and bring additional evidence that hPARP-1 may also play a role in undamaged cells.

Nucleotide sequence and DNA secondary structure, as well as replication protein A, modulate the single-stranded abasic endonuclease activity of APE1

A major role of the multifunctional human Ape1 protein is to incise at apurinic/apyrimidinic (AP) sites in DNA via site-specific endonuclease activity. This nuclease function has been well characterized on double-stranded (ds) DNA substrates, where the complementary strand provides a template for subsequent base excision repair events. Recently, Ape1 was found to incise efficiently at AP sites positioned within the single-stranded (ss) regions of various biologically relevant DNA configurations. The studies within indicated that the ss endonuclease activity of Ape1 is poorly active on ss AP site-containing polyadenine or polythymine oligonucleotides, suggesting a requirement for some form of DNA secondary structure for efficient cleavage. Computational, footprinting, and biochemical analyses indicated that the nature of the secondary structure and the proximity of the AP site influence Ape1 incision efficiency significantly. Replication protein A (RPA), the major ssDNA-binding protein in mammalian cells, was found to bind ss AP-DNA with similar affinity as unmodified ssDNA and ds AP-DNA with lower affinity. Consistent with their known relative DNA binding affinities, RPA blocks/inhibits the ss, but not ds, AP endonuclease function of Ape1. Moreover, RPA inactivates Ape1 incision activity at an AP site within the ss region of a fork duplex, but not a transcription-like bubble intermediate. The data herein suggested a model whereby RPA selectively suppresses the nontemplated ss cleavage activity of Ape1 in vivo, particularly at sites of ongoing replication/recombination, by coating the ssDNA.

A single catalytic domain of the junction-resolving enzyme T7 endonuclease I is a non-specific nicking endonuclease

A stable heterodimeric protein containing a single correctly folded catalytic domain (SCD) of T7 endonuclease I was produced by means of a trans-splicing intein system. As predicted by a model presented earlier, purified SCD protein acts a non-specific nicking endonuclease on normal linear DNA. The SCD retains some ability to recognize and cleave a deviated DNA double-helix near a nick or a strand-crossing site. Thus, we infer that the non-specific and nicked-site cleavage activities observed for the native T7 endonuclease I (as distinct from the resolution activity) are due to uncoordinated actions of the catalytic domains. The positively charged C-terminus of T7 Endo I is essential for the enzymatic activity of SCD, as it is for the native enzyme. We propose that the preference of the native enzyme for the resolution reaction is achieved by cooperativity in the binding of its two catalytic domains when presented with two of the arms across a four-way junction or cruciform structure.

Holliday junction-binding peptides inhibit distinct junction-processing enzymes

Holliday junctions (HJ) are the central intermediates in both homologous recombination and site-specific recombination performed by tyrosine recombinases such as the bacteriophage lambda Integrase (Int) protein. Previously, our lab identified peptide inhibitors of Int-mediated recombination that prevent the resolution of HJ intermediates. We now show that two of these inhibitors bind HJ DNA in the square-planar conformation even in the absence of Int protein. The peptides prevent unwinding of branched DNA substrates by the RecG helicase of Escherichia coli and interfere with the resolution of HJ substrates by the RuvABC complex. Our results suggest that these peptides target all proteins that process HJ in the square-planar conformation. These inhibitors should be extremely useful for dissecting homologous recombination and recombination-dependent repair in vitro and in vivo.

Conformational model of the Holliday junction transition deduced from molecular dynamics simulations

Homologous recombination plays a key role in the restart of stalled replication forks and in the generation of genetic diversity. During this process, two homologous DNA molecules undergo strand exchange to form a four-way DNA (Holliday) junction. In the presence of metal ions, the Holliday junction folds into the stacked-X structure that has two alternative conformers. Experiments have revealed the spontaneous transitions between these conformers, but their detailed pathways are not known. Here, we report a series of molecular dynamics simulations of the Holliday junction at physiological and elevated (400 K) temperatures. The simulations reveal new tetrahedral intermediates and suggest a schematic framework for conformer transitions. The tetrahedral intermediates bear resemblance to the junction conformation in complex with a junction-resolving enzyme, T7 endonuclease I, and indeed, one intermediate forms a stable complex with the enzyme as demonstrated in one simulation. We also describe free energy minima for various states of the Holliday junction system, which arise during conformer transitions. The results show that magnesium ions stabilize the stacked-X form and destabilize the open and tetrahedral intermediates. Overall, our study provides a detailed dynamic model of the Holliday junction undergoing a conformer transition.

Peptide trapping of the Holliday junction intermediate in Cre-loxP site-specific recombination

Cre recombinase is a prototypical member of the tyrosine recombinase family of site-specific recombinases. Members of this family of enzymes catalyze recombination between specific DNA sequences by cleaving and exchanging one pair of strands between the two substrate sites to form a 4-way Holliday junction (HJ) intermediate and then resolve the HJ intermediate to recombinant products by a second round of strand exchanges. Recently, hexapeptide inhibitors have been described that are capable of blocking the second strand exchange step in the tyrosine recombinase recombination pathway, leading to an accumulation of the HJ intermediate. These peptides are active in the lambda-integrase, Cre recombinase, and Flp recombinase systems and are potentially important tools for both in vitro mechanistic studies and as in vivo probes of cellular function. Here we present biochemical and crystallographic data that support a model where the peptide inhibitor binds in the center of the recombinase-bound DNA junction and interacts with solvent-exposed bases near the junction branch point. Peptide binding induces large conformational changes in the DNA strands of the HJ intermediate, which affect the active site geometries in the recombinase subunits.

Substrate recognition and catalysis by the Holliday junction resolving enzyme Hje

Two archaeal Holliday junction resolving enzymes, Holliday junction cleavage (Hjc) and Holliday junction endonuclease (Hje), have been characterized. Both are members of a nuclease superfamily that includes the type II restriction enzymes, although their DNA cleaving activity is highly specific for four-way junction structure and not nucleic acid sequence. Despite 28% sequence identity, Hje and Hjc cleave junctions with distinct cutting patterns--they cut different strands of a four-way junction, at different distances from the junction centre. We report the high-resolution crystal structure of Hje from Sulfolobus solfataricus. The structure provides a basis to explain the differences in substrate specificity of Hje and Hjc, which result from changes in dimer organization, and suggests a viral origin for the Hje gene. Structural and biochemical data support the modelling of an Hje:DNA junction complex, highlighting a flexible loop that interacts intimately with the junction centre. A highly conserved serine residue on this loop is shown to be essential for the enzyme's activity, suggesting a novel variation of the nuclease active site. The loop may act as a conformational switch, ensuring that the active site is completed only on binding a four-way junction, thus explaining the exquisite specificity of these enzymes.

Definitions and analysis of DNA Holliday junction geometry

A number of single-crystal structures have now been solved of the four-stranded antiparallel stacked-X form of the Holliday junction. These structures demonstrate how base sequence, substituents, and drug and ion interactions affect the general conformation of this recombination intermediate. The geometry of junctions had previously been described in terms of a specific set of parameters that include: (i) the angle relating the ends of DNA duplexes arms of the junction (interduplex angle); (ii) the relative rotation of the duplexes about the helix axes of the stacked duplex arms (J(roll)); and (iii) the translation of the duplexes along these helix axes (J(slide)). Here, we present a consistent set of definitions and methods to accurately calculate each of these parameters based on the helical features of the stacked duplex arms in the single-crystal structures of the stacked-X junction, and demonstrate how each of these parameters contributes to an overall conformational feature of the structure. We show that the values for these parameters derived from global rather than local helical axes through the stacked bases of the duplex arms are the most representative of the stacked-X junction conformation. In addition, a very specific parameter (J(twist)) is introduced which relates the relative orientation of the stacked duplex arms across the junction which, unlike the interduplex angle, is length independent. The results from this study provide a general means to relate the geometric features seen in the crystal structures to those determined in solution.

Changing the Enzymatic Activity of T7 Endonuclease by Mutations at the β-Bridge Site: Alteration of Substrate Specificity Profile and Metal Ion Requirements by Mutation Distant from the Catalytic Domain

Phage-encoded resolvase T7 endonuclease I is a structure-specific endonuclease. The enzyme acts on a broad spectrum of substrates with a variety of DNA structures. The enzyme is a dimer with two separated catalytic domains connected by an elongated beta-sheet bridge. The activities of enzymes with mutations in the beta-bridge segment were studied. Mutations that did not affect catalytic domain folding and function but did alter the relative positions of these domains retained catalytic activity but with altered specificity and metal ion dependence. Our results suggest that the enzyme recognizes its substrates by DNA conformation exclusion and offer a simple explanation for the broad substrate specificity of phage resolvase.

Metal Ion Binding in the Active Site of the Junction-resolving Enzyme T7 Endonuclease I in the Presence and in the Absence of DNA

Endonuclease I of bacteriophage T7 is a DNA junction-resolving enzyme. We have previously used crystallography to demonstrate the binding of two manganese ions into the active site that is formed by three carboxylate (Glu 20, Asp 55 and Glu 65) and a lysine residue (Lys 67). Endonuclease I is active in the presence of magnesium, manganese, iron (II) and cobalt (II) ions, weakly active in the presence of nickel, copper (II) and zinc ions, and completely inactive in the presence of calcium ions. However, using calorimetry, we have observed the binding of two calcium ions to the free enzyme in a manner very similar to the binding of manganese ions. In the presence of iron (II) ions, we have obtained a cleavage of the continuous strands of a junction bound by endonuclease I, at sites close to (but not identical with) enzyme-induced hydrolysis. The results suggest that this arises from attack by locally generated hydroxyl radicals, arising from iron (II) ions bound into the active site. This therefore provides an indirect way of examining metal ion binding in the enzyme-junction complex. Ion binding in free protein (by calorimetry) and the enzyme-junction complex (iron-induced cleavage) have been studied in series of active-site mutants. Both confirm the importance of the three carboxylate ligands, and the lack of a requirement for Lys67 for the ion binding. Calorimetry points to particularly critical role of Asp55, as mutation completely abolishes all binding of both manganese and calcium ions.