Influence of increasing anode surface area on nitrite-absent ammonium oxidation in a continuous single-chamber bio-electrochemical system

Reducing energy consumption in conventional nitrogen removal processes is a crucial and urgent requirement. This study proposes an efficient electrode-dependent bio-electrochemical anaerobic ammonium (NH4+-N) oxidation (BE-ANAMMOX) process, employing a carbon brush as the electron acceptor and voltage of 0.8 V. The applied voltage facilitated the removal of NH4+-N with a maximum removal efficiency of 41% and a Coulombic efficiency of 40.92%, without the addition of nitrite (NO2--N). Furthermore, the NH4+-N removal efficiency demonstrated an increase corresponding to the increase in the anodic surface area. The bio-electrochemical NH4+-N removal achieved remarkable reductions, eliminating the need for O2 and NO2--N by 100%, lowering energy consumption by 67%, and reducing CO2 emissions by 66% when treating 1 kg of NH4+-N. An analysis of the microbial community revealed an increase in nitrifiers and denitrifiers, including Exiguobacterium aestuarii, Alishewanella aestuarii, Comamonas granuli, and Acinetobacter baumannii. This intricate process involved the direct conversion of NH4+-N to N2 by ANAMMOX bacteria through extracellular electron transfer, all without NO2--N. Thus, bio-electrochemical NH4+-N removal exhibits promising potential for effective nitrogen removal in wastewater treatment facilities.

Enhancing start-up strategies for anammox granular sludge systems: A review

The anaerobic ammonium oxidation (anammox) process has been developed as one of the optimal alternatives to the conventional biological nitrogen removal process because of its high nitrogen removal capacity and low energy consumption. However, the slow growth rate of anammox bacteria and its high sensitivity to environmental changes have resulted in fewer anammox sludge sources for process start-up and a lengthy start-up period. Given that anammox microorganisms tend to aggregate, granular-anammox sludge is a frequent byproduct of the anammox process. In this study, we review state-of-the-art strategies for promoting the formation of anammox granules and the start-up of the anammox process based on the literature of the past decade. These strategies are categorized as the transformation of alternative sludge, the addition of accelerators, the introduction of functional carriers, and the implementation of other physical methods. In addition, the formation mechanism of anammox granules, the operational performance of various strategies, and their promotion mechanisms are introduced. Finally, prospects are presented to indicate the gaps in contemporary research and the potential future research directions. This review functions as a summary guideline and theoretical reference for the cultivation of granular-anammox sludge, the start-up of the anammox process, and its practical application.

Metabolic insights into the interaction between nitrogen removal and 4-chlorophenol reduction of anammox consortia

The response characteristic and performance stabilization of anammox process under the stress of the potential organic pollutants support the application of ammonia-nitrogen wastewater treatment. In the present study, nitrogen removal performance was significantly suppressed with the addition of 4-chlorophenol. The activity of anammox process was inhibited by 14.23% (0.1 mg/L), 20.54% (1 mg/L) and 78.15% (10 mg/L), respectively. Metagenomic analysis revealed a significant decrease in the abundance of KEGG pathways associated with carbohydrate and amino acid metabolism with increasing 4-chlorophenol concentration. Metabolic pathway profiles suggest that putrescine is down-regulated at high 4-chlorophenol stress due to inhibition of nitrogen metabolism processes, while it is up-regulated to reduce oxidative damage. In addition, the presence of 4-chlorophenol induced an enhancement of EPS and bacterial debris decomposition, and a partial conversion of 4-chlorophenol to p-nitrophenol. This study unravels the mechanism of effect on anammox consortia in response to 4-CP, which could provide supplementary to facilitate its full-scale application.

Integration of EBPR with mainstream anammox process to treat real municipal wastewater: Process performance and microbiology

The mainstream application of anaerobic ammonium oxidation (anammox) for sustainable N removal remains a challenge. Similarly, with recent additional stringent regulations for P discharges, it is imperative to integrate N with P removal. This research studied integrated fixed film activated sludge (IFAS) technology to simultaneously remove N and P in real municipal wastewater by combining biofilm anammox with flocculent activated sludge for enhanced biological P removal (EBPR). This technology was assessed in a sequencing batch reactor (SBR) operated as a conventional A2O (anaerobic-anoxic-oxic) process with a hydraulic retention time of 8.8 h. After a steady state operation was reached, robust reactor performance was obtained with average TIN and P removal efficiencies of 91.3 ± 4.1% and 98.4 ± 2.4%, respectively. The average TIN removal rate recorded over the last 100 d of reactor operation was 118 mg/L·d, which is a reasonable number for mainstream applications. The activity of denitrifying polyphosphate accumulating organisms (DPAOs) accounted for nearly 15.9% of P-uptake during the anoxic phase. DPAOs and canonical denitrifiers removed approximately 5.9 mg TIN/L in the anoxic phase. Batch activity assays, which showed that nearly 44.5% of TIN were removed by the biofilms during the aerobic phase. The functional gene expression data also confirmed anammox activities. The IFAS configuration of the SBR allowed operation at a low solid retention time (SRT) of 5-d without washing out biofilm ammonium-oxidizing and anammox bacteria. The low SRT, combined with low dissolved oxygen and intermittent aeration, provided a selective pressure to washout nitrite-oxidizing bacteria and glycogen-accumulating organisms, as relative abundances of.

Highly Enriched Anammox Bacteria with a Novel Granulation Model Regulated by Epistylis spp. in Domestic Wastewater Treatment

Anammox granulation is an efficient solution proffered to enrich slow-growing anammox bacteria (AnAOB), but the lack of effective granulation strategies for low-strength domestic wastewater impedes its application. In this study, a novel granulation model regulated by Epistylis spp. for highly enriched AnAOB was revealed for the first time. Notably, anammox granulation was achieved within 65 d of domestic wastewater treatment. The stalks of Epistylis spp. were found to act as the skeleton of granules and provide attachment points for bacterial colonization, and the expanded biomass layer in turn provided more area for the unstalked free-swimming zooids. Additionally, Epistylis spp. exerted much less predation stress on AnAOB than on nitrifying bacteria, and AnAOB tended to grow in aggregates in the interior of granules, thus favoring the growth and retention of AnAOB. Ultimately, the relative abundance of AnAOB reached up to a maximum of 8.2% in granules (doubling time of 9.9 d) compared to 1.1% in flocs (doubling time of 23.1 d), representing the most substantial disparity between granules and flocs. Overall, our findings advance the current understanding of interactions involved in granulation between protozoa and microbial communities and offer new insight into the specific enrichment of AnAOB under the novel granulation model.

Enhanced Bio-P removal: Past, present, and future - A comprehensive review

Excess amounts of phosphorus (P) and nitrogen (N) from anthropogenic activities such as population growth, municipal and industrial wastewater discharges, agriculture fertilization and storm water runoffs, have affected surface water chemistry, resulting in episodes of eutrophication. Enhanced biological phosphorus removal (EBPR) based treatment processes are an economical and environmentally friendly solution to address the present environmental impacts caused by excess P present in municipal discharges. EBPR practices have been researched and operated for more than five decades worldwide, with promising results in decreasing orthophosphate to acceptable levels. The advent of molecular tools targeting bacterial genomic deoxyribonucleic acid (DNA) has also helped us reveal the identity of potential polyphosphate-accumulating organisms (PAO) and denitrifying PAO (DPAO) responsible for the success of EBPR. Integration of process engineering and environmental microbiology has provided much-needed confidence to the wastewater community for the successful implementation of EBPR practices around the globe. Despite these successes, the process of EBPR continues to evolve in terms of its microbiology and application in light of other biological processes such as anaerobic ammonia oxidation and on-site carbon capture. This review provides an overview of the history of EBPR, discusses different operational parameters critical for the successful operation of EBPR systems, reviews current knowledge of EBPR microbiology, the influence of PAO/DPAO on the disintegration of microbial communities, stoichiometry, EBPR clades, current practices, and upcoming potential innovations.

Microbiomes and Planctomycete diversity in large-scale aquaria habitats

In commercial large-scale aquaria, controlling levels of nitrogenous compounds is essential for macrofauna health. Naturally occurring bacteria are capable of transforming toxic nitrogen species into their more benign counterparts and play important roles in maintaining aquaria health. Nitrification, the microbially-mediated transformation of ammonium and nitrite to nitrate, is a common and encouraged process for management of both commercial and home aquaria. A potentially competing microbial process that transforms ammonium and nitrite to dinitrogen gas (anaerobic ammonium oxidation [anammox]) is mediated by some bacteria within the phylum Planctomycetes. Anammox has been harnessed for nitrogen removal during wastewater treatment, as the nitrogenous end product is released into the atmosphere rather than in aqueous discharge. Whether anammox bacteria could be similarly utilized in commercial aquaria is an open question. As a first step in assessing the viability of this practice, we (i) characterized microbial communities from water and sand filtration systems for four habitats at the Tennessee Aquarium and (ii) examined the abundance and anammox potential of Planctomycetes using culture-independent approaches. 16S rRNA gene amplicon sequencing revealed distinct, yet stable, microbial communities and the presence of Planctomycetes (~1-15% of library reads) in all sampled habitats. Preliminary metagenomic analyses identified the genetic potential for multiple complete nitrogen metabolism pathways. However, no known genes diagnostic for the anammox reaction were found in this survey. To better understand the diversity of this group of bacteria in these systems, a targeted Planctomycete-specific 16S rRNA gene-based PCR approach was used. This effort recovered amplicons that share <95% 16S rRNA gene sequence identity to previously characterized Planctomycetes, suggesting novel strains within this phylum reside within aquaria.

Challenges, solutions and prospects of mainstream anammox-based process for municipal wastewater treatment

Anaerobic ammonia oxidation (anammox) process has a promising application prospect for the mainstream deammonification of municipal wastewater due to its high efficiency and low energy consumption. In this paper, challenges and solutions of mainstream anammox-based process are summarized by analyzing the literature of recent ten years. Slow growth rate of anammox bacteria is a main challenge for mainstream anammox-based process, and enhancement of bacteria retention has been recognized to be necessary. Compared with directly increasing sludge retention time (SRT) with membrane bioreactors or sequencing batch reactors, culturing anammox bacteria in the form of biofilm or granule sludge is more promising for its feasibility of eliminating nitrite oxidizing bacteria (NOB). Besides, adding external electron donors or conductive materials and enriching the concentration of ammonia with absorption materials have also been proved helpful to improve the activity of anammox bacteria. Other challenges include the elimination of NOB and achieving ideal ratio of NH₄⁺ and NO₂^-. To solve these problems and achieve stable partial nitrification, composite control strategies based on low SRT and limited aeration are needed based on the special characteristics of ammonia oxidizing bacteria (AOB) and NOB. When treating actual wastewater, interference of low temperature and components in the influent is another problem. Relatively high activity of anammox bacteria has been realized after artificial acclimation at low temperature and the mechanism was also preliminary explored. Different pre-treatment sections have been designed to reduce the concentration of COD and S^2- from the influent. As for the nitrate produced by the anammox reaction, coupling processes are useful to reduce the concentration of nitrate in the effluent. In brief, suitable reactor and coupling process should be selected according to the temperature, influent quality and discharge targets of different regions. The future prospects of the mainstream anammox-based process are also put forward.

The influence of antibiotics on the anammox process - a review

Anaerobic ammonium oxidation (anammox) is one of the most promising processes for the treatment of ammonium-rich wastewater. It is more effective, cheaper, and more environmentally friendly than the conventional process currently in use for nitrogen removal. Unfortunately, anammox bacteria are sensitive to various substances, including heavy metals and organic matter commonly found in the wastewater treatment plants (WWTPs). Of these deleterious substances, antibiotics are recognized to be important. For decades, the increasing consumption of antibiotics has led to the increased occurrence of antibiotics in the aquatic environment, including wastewater. One of the most important issues related to antibiotic pollution is the generation and transfer of antibiotic resistance bacteria (ARB) and antibiotic resistance genes (ARGs). Here, we will discuss the effect of short- and long-term exposure of the anammox process to antibiotic pollutants; with a special focus on the activity of the anammox bacteria, biomass properties, community structures, the presence of antibiotic resistance genes and combined effect of antibiotics with other substances commonly found in wastewater. Further, the defense mechanisms according to which bacteria adapt against antibiotic stress are speculated upon. This review aims to facilitate a better understanding of the influence of antibiotics and other co-pollutants on the anammox process and to highlight future avenues of research to target gaps in the knowledge.

Microbial community and performance of a partial nitritation/anammox sequencing batch reactor treating textile wastewater

Implementation of onsite bioremediation technologies is essential for textile industries due to rising concerns in terms of water resources and quality. Partial nitritation-anaerobic ammonium oxidation (PN/A) processes emerged as a valid, but unexplored, solution. In this study, the performance of a PN/A pilot-scale (9 m3) sequencing batch reactor treating digital textile printing wastewater (10-40 m3 d-1) was monitored by computing nitrogen (N) removal rate and efficiencies. Moreover, the structure of the bacterial community was assessed by next generation sequencing and quantitative polymerase chain reaction (qPCR) analyses of several genes, which are involved in the N cycle. Although anaerobic ammonium oxidation activity was inhibited and denitrification occurred, N removal rate increased from 16 to 61 mg N g VSS-1 d-1 reaching satisfactory removal efficiency (up to 70%). Ammonium (18-70 mg L-1) and nitrite (16-82 mg L-1) were detected in the effluent demonstrating an unbalance between the aerobic and anaerobic ammonia oxidation activity, while constant organic N was attributed to recalcitrant azo dyes. Ratio between nitrification and anammox genes remained stable reflecting a constant ammonia oxidation activity. A prevalence of ammonium oxidizing bacteria and denitrifiers suggested the presence of alternative pathways. PN/A resulted a promising cost-effective alternative for textile wastewater N treatment as shown by the technical-economic assessment. However, operational conditions and design need further tailoring to promote the activity of the anammox bacteria.

Recovery and applications of ammoniacal nitrogen from nitrogen-loaded residual streams: A review

Total ammoniacal nitrogen (TAN) is considered to be a pollutant, but is also a versatile resource. This review presents an overview of the TAN recovery potentials from nitrogen (N)-loaded residual streams by discussing the sources, recovery technologies and potential applications. The first section of the review addresses the fate of TAN after its production. The second section describes the identification and categorisation of N-loaded (≥0.5 g L^-1 of reduced N) residual streams based on total suspended solids (TSS), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN), TAN, and TAN/TKN ratio. Category 1 represents streams with a low TAN/TKN ratio (<0.5) that need conversion of organic-N to TAN prior to TAN recovery, for example by anaerobic digestion (AD). Category 2 represents streams with a high TAN/TKN ratio (≥0.5) and high TSS (>1 g L^-1) that require a decrease of the TSS prior to TAN recovery, whereas category 3 represents streams with a high TAN/TKN ratio (≥0.5) and low TSS (≤1 g L^-1) that are suitable for direct TAN recovery. The third section focuses on the key processes and limitations of AD, which is identified as a suitable technology to increase the TAN/TKN ratio by converting organic-N to TAN. In the fourth section, TAN recovery technologies are evaluated in terms of the feed composition tolerance, the required inputs (energy, chemicals, etc.) and obtained outputs of TAN (chemical form, concentration, etc.). Finally, in the fifth section, the use of recovered TAN for three major potential applications (fertilizer, fuel, and resource for chemical and biochemical processes) is discussed. This review presents an overview of possible TAN recovery strategies based on the available technologies, but the choice of the recovery strategy shall ultimately depend on the product characteristics required by the application. The major challenges identified in this review are the lack of information on enhancing the conversion of organic-N into TAN by AD, the difficulties in comparing the performance and required input of the recovery technologies, and the deficiency of information on the required concentration and quality of the final TAN products for reuse.

Autotrophic nitrogen removal for decentralized treatment of ammonia-rich industrial textile wastewater: process assessment, stabilization and modelling

Digital textile printing (DTP) is a game-changer technology that is rapidly expanding worldwide. On the other hand, process wastewater is rich in ammoniacal and organic nitrogen, resulting in relevant issues for discharge into sewer system and treatment in centralized plants. The present research is focused on the assessment of the partial nitritation/anammox process in a single-stage granular sequencing batch reactor for on-site decentralized treatment. The technical feasibility of the process was assessed by treating wastewater from five DTP industries in a laboratory-scale reactor, in one case investigating long-term process stabilization. While experimental results indicated nitrogen removal efficiencies up to about 70%, complying with regulations on discharge in sewer system, these data were used as input for process modelling, whose successful parameter calibration was carried out. The model was applied to the simulation of two scenarios: (i) the current situation of a DTP company, in which wastewater is discharged into the sewer system and treated in a centralized plant, (ii) the modified situation in which on-site decentralized treatment for DTP wastewater is implemented. The second scenario resulted in significant improvements, including reduced energy consumption (- 15%), reduced greenhouse gases emission, elimination of external carbon source for completing denitrification at centralized WWTP and reduced sludge production (- 25%).

Anammox bacteria in treating ammonium rich wastewater: Recent perspective and appraisal

The discovery of anammox process has provided eco-friendly and low-cost means of treating ammonia rich wastewater with remarkable efficiency. Furthermore, recent studies have shown that the possibility of operating the anammox process under low temperatures and high organic matter contents broadening the application of the anammox process. However, short doubling time and extensive levels of sensitivity towards nutrients and environmental alterations such as salinity and temperature are the limitations in practical applications of the anammox process. This review article provides the recent yet comprehensive viewpoint on anammox bacteria and the key perspectives in applying them as an efficient strategy for wastewater treatment.

Bioelectrochemical systems for environmental remediation of estrogens: A review and way forward

Globally estrogenic pollutants are a cause of concern in wastewaters and water bodies because of their high endocrine disrupting activity leading to extremely negative impacts on humans and other organisms even at very low environmental concentrations. Bioremediation of estrogens has been studied extensively and one technology that has emerged with its promising capabilities is Bioelectrochemical Systems (BESs). Several studies in the past have investigated BESs applications for treatment of wastewaters containing toxic recalcitrant pollutants with a primary focus on improvement of performance of these systems for their deployment in real field applications. But the information is scattered and further the improvements are difficult to achieve for standalone BESs. This review critically examines the various existing treatment technologies for the effective estrogen degradation. The major focus of this paper is on the technological advancements for scaling up of these BESs for the real field applications along with their integration with the existing and conventional wastewater treatment systems. A detailed discussion on few selected microbial species having the unusual properties of heterotrophic nitrification and extraordinary stress response ability to toxic compounds and their degradation has been highlighted. Based on the in-depth study and analysis of BESs, microbes and possible benefits of various treatment methods for estrogen removal, we have proposed a sustainable Hybrid BES-centered treatment system for this purpose as a choice for wastewater treatment. We have also identified three pipeline tasks that reflect the vital parts of the life cycle of drugs and integrated treatment unit, as a way forward to foster bioeconomy along with an approach for sustainable wastewater treatment.

Performance and microbial community structure of a full-scale ANITATMMox bioreactor for treating reject water located in Finland

The aim of this work was to study the operational performance and the microbial community dynamics during the start-up of ANITA^TMMox technology implemented at full-scale wastewater treatment plant in Finland to treat reject water from anaerobic digesters. The average ammonium removal in the studied setup reached around 90%, withstanding ammonium loads up to 0.13 g N m^-2h^-1. The nitrite concentration in the effluent did not exceed 10 mg L^-1, and there was a slight accumulation of NO₃^--N during the operation which was controlled. Thus, the result showed a robust success to high ammonium loading in presence of organic matter. The sequencing showed a heterogeneous microbial population where Methanosaeta, WCHA1-57 genus, Sphingobacteriia, Chlorobia and diverse unknown fungi were found as dominant phylotypes. Moreover, members of the Brocadiaceae family were dominant in the adhered biomass, mostly represented by Candidatus Scalindua, rarely reported in WWTPs. Overall, the results demonstrated a drastic effect of region-specific operational conditions on carrier biofilm microbial communities as it was demonstrated by the microbial studies.

Purification of the key enzyme complexes of the anammox pathway from DEMON sludge

Anaerobic Ammonium Oxidation ("anammox") is a bacterial process in which nitrite and ammonium are converted into nitrogen gas and water, yielding energy for the cell. Anammox is an important branch of the global biological nitrogen cycle, being responsible for up to 50% of the yearly nitrogen removal from the oceans. Strikingly, the anammox process uniquely relies on the extremely reactive and toxic compound hydrazine as a free intermediate. Given its global importance and biochemical novelty, there is considerable interest in the enzymes at the heart of the anammox pathway. Unfortunately, obtaining these enzymes in sufficiently large amounts for biochemical and structural studies is problematic, given the slow growth of pure cultures of anammox bacteria when high cell densities are required. However, the anammox process is being applied in wastewater treatment to remove nitrogenous waste in processes like DEamMONification (DEMON). In plants using such processes, which rely on a combination of aerobic ammonia-oxidizers and anammox organisms, kilogram amounts of anammox bacteria-containing sludge are readily available. Here, we report a protein isolation protocol starting from anammox cells present in DEMON sludge from a wastewater treatment plan that readily yields pure preparations of key anammox proteins in the tens of milligrams, including hydrazine synthase HZS and hydrazine dehydrogenase (HDH), as well as hydroxylamine oxidoreductase (HAO). HDH and HAO were active and of sufficient quality for biochemical studies and for HAO, the crystal structure could be determined. The method presented here provides a viable way to obtain materials for the study of proteins not only from the central anammox metabolism but also for the study of other exciting aspects of anammox bacteria, such as for example, their unusual ladderane lipids.

Short- and long-term effects of copper on anammox under gradually increased copper concentrations

This study aims to determine both short- and long-term response of enriched anammox culture to Cu. Assessment of short-term inhibition is based both on total applied Cu concentration and potential bioavailable fractions like intracellular, surface-bound, soluble and free Cu ion. The half maximal inhibitory concentration (IC50) values for total applied, soluble, intracellular and cell-associated concentrations were determined as 4.57 mg/L, 1.97 mg/L, 0.71 mg/L, 1.11 mg/L, respectively. Correlation between the surface-bound fraction of Cu and inhibition response was weak, suggesting that Cu sorbed to biomass was not directly responsible for the effects on anammox activity. There was a disparity between the results of short- and long-term experiments in terms of inhibition threshold concentration (i.e. short-term IC50 = 4.57 mg/L vs long-term IC50 = 6.74 mg/L). Candidatus Kuenenia (59.8%) and Candidatus Brocadia (40.2%) were the two main anammox genera within the initial biomass sample. One of the most interesting finding of the study is the demonstration that a complete wash-out of C. Brocadia genus at an applied Cu concentration of 6.5 mg/L. This strongly indicates that C. Brocadia were not able to tolerate high copper concentrations and all nitrogen conversion was carried out by C. Kuenenia during the Cu exposure period.

Sludge ratio affects the start-up performance and functional bacteria distribution of a hybrid CANON system

To investigate the effect of sludge ratio on the hybrid CANON system, autotrophic nitrogen removal sludge was inoculated with different granule/floc ratios to initiate the CANON system, and maintained the sludge ratio during the operation process. The start-up performances were compared, and the distribution characteristics of functional bacteria were investigated. The results show that the Equivalent system (granules:flocs = 1:1-1:1.5) successfully started-up on day 19, and the nitrogen removal rate (NRR) reached 0.299 kgN m^-3·d^-1 on day 63. At the same time, it was less affected by the load shock than High-granules and High-flocs systems. Therefore, the Equivalent system had the strongest start-up performance. The activities of the functional bacteria conformed to spatial heterogeneity, unlike the abundance. With the increased floc proportion, the difference in the activity and abundance of anaerobic ammonium-oxidizing bacteria (AAOB) between the granules and flocs increased, while there was a decrease in the difference in aerobic ammonium-oxidizing bacteria (AOB). However, the abundance of Nitrosomonas in the granules was higher than in the flocs when the proportion of flocs was higher than 50%. This study provides new ideas and insights for the fast start-up of the CANON system and can conform to the varying needs of engineering applications.

Interrelationships between tetracyclines and nitrogen cycling processes mediated by microorganisms: A review

Due to their broad-spectrum antibacterial activity and low cost, tetracyclines (TCs) are a class of antibiotics widely used for human and veterinary medical purposes and as a growth-promoting agent for aquaculture. Interrelationships between TCs and nitrogen cycling have attracted scientific attention due to the complicated processes mediated by microorganisms. TCs negatively impact the nitrogen cycling; however, simultaneous degradation of TCs during nitrogen cycling mediated by microorganisms can be achieved. This review encapsulates the background and distribution of TCs in the environment. Additionally, the main nitrogen cycling process mediated by microorganisms were retrospectively examined. Furthermore, effects of TCs on the nitrogen cycling processes, namely nitrification, denitrification, and anammox, have been summarized. Finally, the pathway and microbial mechanism of degradation of TCs accompanied by nitrogen cycling processes were reviewed, along with the scope for prospective studies.

A critical review on the effects of antibiotics on anammox process in wastewater

Anaerobic ammonium oxidation (anammox) has recently become of significant interest due to its capability for cost-effective nitrogen elimination from wastewater. However, anaerobic ammonia-oxidizing bacteria (AnAOB) are sensitive to environmental changes and toxic substances. In particular, the presence of antibiotics in wastewater, which is considered unfavorable to the anammox process, has become a growing concern. Therefore, it is necessary to evaluate the effects of these inhibitors to acquire information on the applicability of the anammox process. Hence, this review summarizes our knowledge of the effects of commonly detected antibiotics in water matrices, including fluoroquinolone, macrolide, β-lactam, chloramphenicol, tetracycline, sulfonamide, glycopeptide, and aminoglycoside, on the anammox process. According to the literature, the presence of antibiotics in wastewater could partially or completely inhibit anammox reactions, in which antibiotics targeting protein synthesis or DNA replication (excluding aminoglycoside) were the most effective against the AnAOB strains.

Advances and challenges of mainstream nitrogen removal from municipal wastewater with anammox-based processes

Anaerobic ammonium oxidation (anammox) is a novel process of deammonification that exhibits superior ecological and economic potential compared to that of traditional heterotrophic processes. Although this process has been successfully implemented in treating high-strength nitrogen-contaminated wastewater, it still faces many challenges in treating mainstream municipal wastewater. This review aims to provide an overview of the status and challenges of mainstream anammox-based processes. The different configurations and crucial factors are discussed in this review. Finally, the future needs for feasible application are stated. PRACTITIONER POINTS: Factors restricting mainstream application of anammox-based processes are reviewed. Control strategies for selecting and maintaining anammox bacteria are discussed. Recent advances in nitrite production via partial nitrification or denitrification are summarized. Future needs for the feasible application of anammox-based nitrogen removal technology for mainstream municipal wastewater treatment are outlined.

Anammox bacteria enrichment and denitrification in moving bed biofilm reactors packed with different buoyant carriers: Performances and mechanisms

Anaerobic ammonium oxidation (anammox) is recognized as the most cost-effective process for nitrogen removal from wastewater. In this study, effects of polyethylene plastics, nonwoven fabric, granular activated carbon (GAC) and polyurethane sponge as buoyant carriers were evaluated in lab-scale moving bed biofilm reactors (MBBRs). The overall performance of MBBRs with four types of carriers from priority to inferiority was noticed as, GAC, nonwoven fabrics, polyurethane sponge and polyethylene plastics under the same packing ratio of 20 v% and an average carrier size of 4 × 4 × 4 mm. The hydrophobic surface of GAC could selectively adsorb hydrophobic protein and favor anammox bacteria attachment, which contributed to achieving a total nitrogen removal rate of 0.40 kg-N/(m³·d) in 60 days. In conclusion, our results provide compelling evidence for achieving effective anammox process in an MBBR with GAC carriers and would benefit towards accomplishing a stable partial nitritation-anammox process in the future.

Anammox-based processes: How far have we come and what work remains? A review by bibliometric analysis

Nitrogen contamination remains a severe environmental problem and a major threat to sustainable development worldwide. A systematic analysis of the literature indicates that the partial nitritation-anammox (PN/AMX) process is still actively studied as a viable option for energy-efficient and feasible technology for the sustainable treatment of N- rich wastewaters, since its initial discovery in 1990. Notably, the mainstream PN/AMX process application remains the most challenging bottleneck in AMX technology and fascinates the world's attention in AMX studies. This paper discusses the recent trends and developments of PN/AMX research and analyzes the results of recent years of research on the PN/AMX from lab-to full-scale applications. The findings would deeply improve our understanding of the major challenges under mainstream conditions and next-stage research on the PN/AMX process. A great deal of efforts has been made in the process engineering, PN/AMX bacteria populations, predictive modeling, and the full-scale implementations during the past 22 years. A series of new and excellent experimental findings at lab, pilot and full-scale levels including good nitrogen removal performance even under low temperature (15-10 °C) around the world were achieved. To date, pilot- and full-scale PN/AMX have been successfully used to treat different types of industrial sewage, including black wastewater, sludge digester liquids, landfill leachate, monosodium glutamate wastewater, etc. Supplementing the qualitative analysis, this review also provides a quantitative bibliometrics study and evaluates global perspectives on PN/AMX research published during the past 22 years. Finally, general trends in the development of PN/AMX research are summarized with the aim of conveying potential future trajectories. The current review offers a valuable orientation and global overview for scientists, engineers, readers and decision makers presently focusing on PN/AMX processes.

Performance of Anammox Processes for Wastewater Treatment: A Critical Review on Effects of Operational Conditions and Environmental Stresses

The anaerobic ammonium oxidation (anammox) process is well-known as a low-energy consuming and eco-friendly technology for treating nitrogen-rich wastewater. Although the anammox reaction was widely investigated in terms of its application in many wastewater treatment processes, practical anammox application at the pilot and industrial scales is limited because nitrogen removal efficiency and anammox activity are dependent on many operational factors such as temperature, pH, dissolved oxygen concentration, nitrogen loading, and organic matter content. In practical application, anammox bacteria are possibly vulnerable to non-essential compounds such as sulfides, toxic metal elements, alcohols, phenols, and antibiotics that are potential inhibitors owing to the complexity of the wastewater stream. This review systematically summarizes up-to-date studies on the effect of various operational factors on nitrogen removal performance along with reactor type, mode of operation (batch or continuous), and cultured anammox bacterial species. The effect of potential anammox inhibition factors such as high nitrite concentration, high salinity, sulfides, toxic metal elements, and toxic organic compounds is listed with a thorough interpretation of the synergistic and antagonistic toxicity of these inhibitors. Finally, the strategy for optimization of anammox processes for wastewater treatment is suggested, and the importance of future studies on anammox applications is indicated.

Microbial ecology dynamics of a partial nitritation bioreactor with Polar Arctic Circle activated sludge operating at low temperature

A lab-scale partial nitritation SBR was operated at 11 °C for 300 days used for the treatment of high-ammonium wastewater, which was inoculated with activated sludge from Rovaniemi WWTP (located in Polar Arctic Circle) in order to evaluate the influence the temperature on the performance, stability and dynamics of its microbial community. The partial nitritation achieved steady-state long-term operation and granulation process was not affected despite the low temperature and high ammonia concentration. The steady conditions were reached after 60 days of operation where the granular biomass was fully-formed and the 50%-50% of ammonium-nitrite effluent was successful achieved. Inoculation with cold adapted inoculum showed to yield bigger, denser granules with faster start-up without necessity of low temperature adaptation period. Next-generation sequences techniques showed that Trichosporonaceae and Xanthomonadaceae were the dominant OTUs in the mature granules. Our study could be useful in the implementation of full-scale partial nitritation reactors in cold regions such as Nordic countries for treating wastewater with high concentration of ammonium.

Successful start-up of the anammox process in constructed wetland microcosms: influence of the electron acceptors on performance, microbial community, and functional genes

Nitrogen removal by anammox process has been recognized as efficient, cost-effective, and low-energy alternative removal. The longer start-up periods of anammox process hindered the widespread application of anammox-based technology. In this study, four identical unplanted subsurface-flow constructed wetlands (USFCWs) were built up to investigate the effects of electron acceptors (Fe³⁺, Mn⁴⁺, SO₄^2-) on the start-up of anammox process. Results indicated that the start-up time of anammox process was shortened to 105 days in R1 (with Fe³⁺ addition) and 110 days in R2 (with Mn⁴⁺ addition) with nitrogen removal efficiencies of above 75%, compared with 148 days in R0 (control). The addition of SO₄^2- had no significant effect on start-up process. High-throughput sequencing results demonstrated that Shannon index increased significantly from 2.87 (R0) to 5.08 (R1) and 5.00 (R2), and the relative abundance of Candidatus Anammoxoglobus rose from 3.6 to 5.3% in R1. Denitratisoma increased significantly in R2 under addition of Mn⁴⁺, which was beneficial for the occurrence of anammox process. The functional genes that related to signal transduction mechanisms and secondary metabolite biosynthesis, transport, and catabolism were upregulated after addition of electron acceptors. These results demonstrated that adding electron acceptors Fe³⁺ or Mn⁴⁺ could be an effective way to accelerate the start-up of anammox process. Graphical abstract ᅟ.

A critical review of one-stage anammox processes for treating industrial wastewater: Optimization strategies based on key functional microorganisms

The one-stage nitritation/anammox (anaerobic ammonium oxidation) process is an energy-saving technology, which has been successfully developed and widely applied to treat industrial wastewaters. For the one-stage nitritation/anammox process, key functional microbes generally include anaerobic ammonia oxidation bacteria (AnAOB), ammonia-oxidizing bacteria (AOB), nitrite oxidizing bacteria (NOB), and heterotrophic bacteria (HB). Cooperation and competition among the key functional microbes are critical to the stability and performance of anammox process. Based upon key functional microorganisms, this review summarizes and discusses the optimized strategies that promote the operation of one-stage nitritation/anammox process. In particular, the review focuses on strategies related to: (1) the retention of anammox biomass through granular sludge or biofilm, (2) the balanced relationship between AOB and AnAOB, (3) the NOB suppression and (4) the HB management by controlling the influent organic matter. In addition, the review proposes further research to address the existing challenges.