Two essential steps for a successful intracytoplasmic sperm injection: injection of immobilized spermatozoa after rupture of the oolema

Applications of laser technology in the manipulation of human spermatozoa

The application of laser technology in the field of assisted reproductive technology (ART) has experienced rapid growth over the past decades owing to revolutionary techniques such as intracytoplasmic sperm injection (ICSI), preimplantation genetic testing (PGT), and in vitro manipulation of gametes and embryos. For male gametes, in vitro manipulation techniques include spermatozoa selection, sorting, immobilization, and quality assessment. A number of studies have been conducted to investigate the application of different laser technologies in the manipulation of human spermatozoa. However, there is a lack of a unified understanding of laser application in the in vitro manipulation of sperm and safety considerations in ART and, subsequently, the inability to make clear and accurate decisions on the clinical value of these laser technologies. This review summarizes the advancements and improvements of laser technologies in the manipulation of human spermatozoa, such as photobiomodulation therapy, laser trap systems for sperm analysis and sorting, laser-assisted selection of immotile sperm and laser-assisted immobilization of sperm prior to ICSI. The safety of those technologies used in ART is also discussed. This review will provide helpful and comprehensive insight into the applications of laser technology in the manipulation of human spermatozoa.

First babies conceived with Automated Intracytoplasmic Sperm Injection

RESEARCH QUESTION

Can an automated sperm injection robot perform Automated Intracytoplasmic Sperm Injection (ICSIA) for use in human IVF?

DESIGN

The ICSIA robot automated the sperm injection procedure, including injection pipette advancement, zona pellucida and oolemma penetration with piezo pulses, and pipette removal after sperm release. The robot was first tested in mouse, hamster and rabbit oocytes, and subsequently using discarded human oocytes injected with microbeads. A small clinical pilot trial was conducted with donor oocytes to study the feasibility of the robot in a clinical setting. The ICSIA robot was controlled by engineers with no micromanipulation experience. Results were compared with those obtained with manual ICSI conducted by experienced embryologists.

RESULTS

The ICSIA robot demonstrated similar results to the manual procedure in the different animal models tested as well as in the pre-clinical validations conducted in discarded human oocytes. In the clinical validation, 13 out of 14 oocytes injected with ICSIA fertilized correctly versus 16 out of 18 in the manual control; eight developed into good-quality blastocysts versus 12 in the manual control; and four were diagnosed as chromosomally normal versus 10 euploid in the manual control. Three euploid blastocysts from the ICSIA robot group have been transferred into two recipients, which resulted in two singleton pregnancies and two babies born.

CONCLUSIONS

The ICSIA robot showed high proficiency in injecting animal and human oocytes when operated by inexperienced personnel. The preliminary results obtained in this first clinical pilot trial are within key performance indicators.

Evaluating the value of day 0 of an ICSI cycle on indicating laboratory outcome

A number of oocyte characteristics have been associated with fertilization, implantation and live-birth rates, albeit without reaching a consensus. This study aims to delineate possible associations between oocyte characteristics, oocyte behavior during intracytoplasmic sperm injection (ICSI), fertilization potential, and laboratory outcomes. Four-hundred and seventy-seven patients, yielding 3452 oocytes, were enrolled in this prospective observational study from 2015 to 2018. Οoplasm granularity was associated with poor embryo quality and higher probabilities of post-ICSI oocytes and embryos discarded in any developmental stage and never selected for embryo transfer or cryopreservation (p < 0.001). Both sudden or difficult ooplasm aspiration, and high or lack of resistance during ICSI were associated with either a poor Zygote-Score or fertilization failure (p < 0.001). Sudden or difficult ooplasm aspiration and high resistance during ICSI penetration were positively associated with resulting to a post-ICSI oocyte or embryo that would be selected for discard. Evaluation of oocyte characteristics and oocyte behavior during ICSI may provide early information regarding laboratory and cycle outcomes. Particularly, ooplasm granularity, and fragmentation of polar body, along with sudden or difficult ooplasm aspiration and high or lack of resistance during ICSI penetration may hinder the outcome of an ICSI cycle. The associations presented herein may contribute towards development of a grading system or a prediction model. Taking into account information on oocytes and ICSI behavior may effectively assist in enhancing IVF outcome rates.

Evaluation of the effect of piezo-intracytoplasmic sperm injection on the laboratory, clinical, and neonatal outcomes

PURPOSE

Limited research has been published on the effect of piezo-assisted intracytoplasmic sperm injection (P-ICSI). We evaluated the effect of P-ICSI on the laboratory, clinical, and neonatal outcomes.

METHODS

This retrospective study was based on the data collected between April 2011 and October 2016. Total 1348 mature oocytes from 145 patients were analyzed. Laboratory, clinical, and neonatal outcomes of those given conventional intracytoplasmic sperm injection (C-ICSI) and those administered P-ICSI were examined.

RESULTS

P-ICSI showed significantly more favorable results, with a survival rate of 97.0% (C-ICSI: 94.1%, P < .010) and a fertilization rate of 83.5% (C-ICSI: 70.6%, P < .001). There were no differences in the blastocyst development rate, implantation rate, miscarriage rate, live birth rate, gestational age, birth weight, proportion of male neonates, cesarean section rate, and congenital abnormalities between the two patient groups.

CONCLUSIONS

Our comparison of P-ICSI with C-ICSI showed that P-ICSI significantly improved the survival and fertilization.

Robotic Immobilization of Motile Sperm for Clinical Intracytoplasmic Sperm Injection

OBJECTIVE

In clinical intracytoplasmic sperm injection (ICSI), a motile sperm must be immobilized before insertion into an oocyte. This paper aims to develop a robotic system for automated tracking, orientation control, and immobilization of motile sperms for clinical ICSI applications.

METHODS

We adapt the probabilistic data association filter by adding sperm head orientation into state variables for robustly tracking the sperm head and estimating sperm tail positions under interfering conditions. The robotic system also utilizes a motorized rotational microscopy stage and a new visual servo control strategy that predicts and compensates for sperm movements to actively adjust sperm orientation for immobilizing a sperm swimming in any direction.

RESULTS

The system robustly tracked sperm head with a tracking success rate of 96.0% and estimated sperm tail position with an accuracy of 1.08 μm under clinical conditions where the occlusion of the target sperm and interference from other sperms occur. Experimental results from robotic immobilization of 400 sperms confirmed that the system achieved a consistent immobilization success rate of 94.5%, independent of sperm velocity or swimming direction.

CONCLUSION

Our adapted tracking algorithm effectively distinguishes the target sperm from interfering sperms. Predicting and compensating for sperm movements significantly reduce the positioning error during sperm orientation control. These features make the robotic system suitable for automated sperm immobilization.

SIGNIFICANCE

The robotic system eliminates stringent skill requirements in manual sperm immobilization. It is capable of manipulating sperms swimming in an arbitrary direction with a high success rate.

Comparison of the external physical damages between laser-assisted and mechanical immobilized human sperm using scanning electronic microscopy

We aim to visualize the external physical damages and distinct external phenotypic effects between mechanical and laser-assisted immobilized human spermatozoa using scanning electronic microscopy (SEM). Human spermatozoa were immobilized mechanically or with laser assistance for SEM examination and the membrane integrities were checked on both types of immobilized spermatozoa. We found evidence of external damages at SEM level on mechanically kinked sperm, but not on laser-assisted immobilized sperm. Although no external damage was found on laser-assist immobilized sperm, there were two distinct types of morphological changes when spermatozoa were stricken by infra-red laser. Coiled tails were immediately formed when Laser pulse was applied to the sperm end piece area, whereas laser applied to the sperm principal piece area resulted in a sharp bend of sperm tails. Sperm immobilized by laser did not exhibit any morphological change if the laser did not hit within the on-screen central target zone or if the laser hit the sperm mid piece or head. Our modified membrane integrity assay revealed that the external membrane of more than half of the laser-assisted immobilized sperm remained intact. In conclusion, mechanical immobilization produced membrane damages whilst laser-assisted immobilization did not result in any external membrane damages besides morphological changes at SEM level.

Strategies to improve fertilisation rates with assisted conception: a systematic review

Successful fertilisation is one of the key steps determining success of assisted conception. Various factors including sperm or oocyte pathology and environmental factors have a significant impact on fertilisation rates. This systematic review is aimed to evaluate the existing evidence about factors affecting fertilisation and strategies to improve fertilisation rates. A literature search was performed using Ovid MEDLINE ® (Jan 1950-April 2016), EMBASE (Jan 1950-April 2016), Ovid OLDMEDLINE ®, Pre-MEDLINE (Jan 1950-April 2016) and the Cochrane Library. Relevant key words were used to combine sets of results and a total 243 papers were screened. Only qualitative analysis was performed, as there was major heterogeneity in study design and methodology for quantitative synthesis. Factors affecting fertilisation were divided into sperm- and oocyte-related factors. The methods to improve fertilisation rates were grouped together based on the approach used to improve fertilisation rates. Optimising laboratory condition and procedural effects in techniques is associated with improved fertilisation rates. Various techniques are described to improve fertilisation rates including assisted oocyte activation, physiological intracytoplasmic sperm injection (PICSI) and intracytoplasmic morphologically selected sperm injection (IMSI). This review highlights the promising strategies under research to enhance fertilisation rates. Adequately powered multicentre randomised trials are required to evaluate these techniques before considering clinical application.

Developmental ability of embryos produced from oocytes with fragile oolemma by intracytoplasmic sperm injection

PURPOSE

In intracytoplasmic sperm injection (ICSI) of oocytes with a fragile oolemma (fragile oocytes), breakage can occur at injection. In this study, we produced embryos from oocytes with a fragile and normal oolemma (normal oocytes) by ICSI and compared their ability to be fertilized and develop in vitro. We also investigated whether fragile oocyte-derived embryos could implant after blastocyst transfer to determine whether fragile oocytes should be used for assisted reproductive technology treatment.

METHODS

Oocytes were divided into three groups-normal oocytes from cycles containing no fragile oocytes (group A), normal oocytes from cycles containing at least one fragile oocyte (group B), and fragile oocytes (group C), and their fertilization abilities after ICSI and the developmental abilities of resultant embryos were compared.

RESULTS

The fertilization rate in group C (65.3 %) was significantly (P < 0.01) lower than those in groups A (84.6 %) and B (86.9 %), and the degeneration rate in group C (24.2 %) was significantly (P < 0.01) higher than those in groups A (0.71 %) and B (0.28 %). However, there were no significant differences in the blastocyst formation rates (59.7-67.5 %) of embryos among the different groups. In addition, the pregnancy rate after transfer of blastocysts in group C (50.0 %) was not significantly different from those in groups A (35.6 %) and B (45.8 %).

CONCLUSIONS

The fertilization ability after ICSI of fragile oocytes is lower than that of normal oocytes but the resultant embryos have the same developmental ability as those of normal oocyte-derived embryos.

Pretreatment of bovine sperm with dithiobutylamine (DTBA) significantly improves embryo development after ICSI

We assessed the effect of pretreating sperm with dithiobutylamine (DTBA) to improve embryo development by intracytoplasmic sperm injection (ICSI) in cows. Acridine Orange staining revealed that when applied at different concentrations (2.5, 5, and 10 mM) and exposure times (5 min, 20 min, 1 h, and 2 h), DTBA reduced disulfide bonds in spermatozoa with the highest efficacy at 5 mM for 5 min. DTBA enhanced the percentage of spermatozoa with free protamine thiol groups compared with untreated spermatozoa (control) (P < 0.05); however, this result did not differ from that of dithiothreitol (DTT) treatment. The percentage of live spermatozoa after DTBA treatment was identical to that in the control, but significantly higher than that after DTT treatment (P < 0.05). After ICSI, DTBA treatment tended to improve male pronuclear formation rate (P = 0.071) compared with non-treated sperm injection. Blastocyst formation rate was significantly improved by DTBA treatment compared with that in DTT, control, and sham injection groups (P < 0.05). Blastocyst quality in terms of cell numbers and ploidy was not different among these groups. In conclusion, DTBA increases the efficacy of blastocyst production by ICSI even if DTT treatment does not work.

Understanding the spermatozoon

The former perception of the spermatozoon as a delivery device of the male genome has been expanded to include a new understanding of the cell's complex role in fertilization. Once the spermatozoon reaches the oocyte, it triggers egg activation and orchestrates the stages of pre- and post-fertilization in a preprogrammed pattern while tapping the oocyte's resources in an effort to generate a new life.

A physiological replacement for polyvinylpyrrolidone (PVP) in assisted reproductive technology

The technique of intracytoplasmic sperm injection (ICSI) requires mechanical immobilization of the sperm that are to be injected; damage thus caused to the sperm membrane is considered to be necessary to activate the sperm for fertilization. Mechanical immobilization and the injection procedure are facilitated by introducing the sperm into a viscous medium that will hinder motility: a solution of polyvinylpyrrolidone (PVP) has been used successfully for this purpose. PVP is an artificial polymer, which has been regarded as chemically inert, although adverse effects have been reported as a result of its use both in vivo and in vitro. Therefore, the use of hyaluronate, the natural component of the extracellular matrix of the cumulus-oocyte complex, was investigated as a replacement for PVP during ICSI. A solution of hyaluronate was found to be as effective as PVP in facilitating the injection procedure, its effect on sperm motility was readily reversible, and its use did not affect the outcome of the treatment cycles in terms of fertilization, pregnancy and live birth rates. Every attempt should be made to eliminate artificial factors in assisted reproductive procedures. Hyaluronate, a natural and readily degradable glycosaminoglycan can be used as a substitute for the artificial PVP polymer without jeopardising the outcome of the treatment cycle.

A new real-time morphology classification for human spermatozoa: a link for fertilization and improved embryo quality

OBJECTIVE

To understand the correlation between normalcy of the sperm, fertilization, and early embryo development, and to establish a detailed classification scoring scale for the individual spermatozoon with the highest predictive fertilizing potential in real time during intracytoplasmic sperm injection (ICSI).

DESIGN

A retrospective and analysis.

SETTING

Laboratory Drouot.

PATIENT(S)

27 couples with male factor infertility referred for ICSI treatment.

INTERVENTION(S)

Before ICSI, motile spermatozoa were scored after aspiration.

MAIN OUTCOME MEASURE(S)

Oocyte fertilization, embryo development and morphology, outcome of scored motile injected spermatozoa.

RESULT(S)

Our suggested formula is (Normal head score = 2) + (Lack of vacuole score = 3) + (Normal base score = 1) = (Total score = 6) for a morphologic "normal top" spermatozoon, calculated with the major criteria affecting the outcome of ICSI. We take into account the normalcy of head size and shape, the base of the head, and the lack of vacuoles. Our scoring of three classes of injected spermatozoa revealed a statistically significant difference in fertilization rate: 39 out of 46 (84%), 94 out of 128 (73%), and 27 out of 44 (61%), respectively. Our examination of the contribution of maternal age in correlation to sperm score revealed a distinction between oocytes originating from women younger than 30 years and oocytes from women aged 30 years and older.

CONCLUSION(S)

Our suggested classification provides allows the best spermatozoon to be chosen for ICSI, particularly for oocytes from women aged 30 years and older.

Successful twin birth following blastocyst culture of embryos derived from the immotile ejaculated spermatozoa from a patient with primary ciliary dyskinesia: a case report

PURPOSE

To describe the ultrastructure of spermatozoa from a patient with complete asthenozoospermia that resulted in live births following blastocyst culture.

MATERIALS AND METHODS

Analyses of spermatozoa from a 36 year old patient were performed using light and electron microscopy. The hypo-osmotic swelling test was used to select spermatozoa for intracytoplasmic sperm injection. Embryos were cultured to the blastocyst stage.

RESULTS

100% of the spermatozoa had dynein arm deficiency with secondary defects varying from 3-17%. Six oocytes were injected; five fertilized normally and one was digynic. All five zygotes formed good quality blastocysts. Three blastocysts were cryopreserved and two blastocysts were transferred. Twin females were born at 37 weeks.

CONCLUSIONS

The hypo-osmotic swelling test can be used to select viable immotile ejaculated spermatozoa from a patient with dynein arm deficiency and can produce excellent fertilization rates and blastocyst development resulting in live births.

Sperm movement in the ooplasm, dithiothreitol pretreatment and sperm freezing are not required for the development of porcine embryos derived from injection of head membrane-damaged sperm

The present study investigated the correlation of sperm movement in the ooplasm, pretreatment of sperm with dithiothreitol (DTT) and sperm freezing with the development of porcine embryos derived from modified intracytoplasmic sperm injection (ICSI). In vitro, matured gilt oocytes without centrifugation were injected with head membrane-damaged spermatozoa aspirated tail-first. In Exp. 1, frozen-thawed sperm were categorized into three groups: impaired, immotile or motile. Oocytes injected with motile sperm (43.6%) showed a higher (P < 0.05) fertilization rate compared to oocytes injected with impaired or immotile sperm (34.5 or 37.2%). The survival rate was significantly higher (P < 0.05) in oocytes injected with impaired sperm (92.9%) than in oocytes injected with immotile or motile sperm (84.8 or 86.7%). No differences were observed in the rates of cleavage or blastocyst formation, and in total cell number of blastocysts among three groups of oocytes. In Exp. 2, motile frozen-thawed sperm were pretreated with DTT before injection and non-treated sperm served as controls. Higher rates (P < 0.05) of fertilization, male pronucleus (MPN) and decondensed sperm head (DSH) formation were observed in oocytes injected with control sperm (41.1, 50.0 and 91.1%, respectively) than in oocytes injected with DTT-treated sperm (22.1, 30.2 and 72.1%, respectively). No differences in embryo development and total cell number of blastocysts were observed between two groups of oocytes. In Exp. 3, motile frozen-thawed or fresh sperm without DTT pretreatment were injected into oocytes. The rates of fertilization and MPN formation were significantly higher (P < 0.05) in oocytes injected with fresh sperm (59.8 and 73.5%) than in oocytes injected with frozen-thawed sperm (36.7 and 59.2%). No differences in embryo development and total cell number of blastocysts were observed between two groups of oocytes. In conclusion, the present study clearly demonstrated that sperm movement in the ooplasm, use of DTT and fresh spermatozoa did not significantly affect on embryo development in porcine modified ICSI.

Statistical analysis of factors affecting fertilization rates and clinical outcome associated with intracytoplasmic sperm injection

OBJECTIVE

To identify and evaluate the statistically significant predictors of intracytoplasmic sperm injection (ICSI) fertilization rates and clinical pregnancy in a single population using appropriate statistical techniques.

DESIGN

Retrospective study.

SETTING

Fertility and Endocrinology Center, University of Washington Medical Center, Seattle, Washington.

PATIENT(S)

Four hundred forty-one patients undergoing their first attempt at IVF-ICSI from January 1, 1999, to May 21, 2001.

INTERVENTION(S)

Each ICSI procedure for an individual patient was performed by a single operator. Sperm parameters, oocyte age, culture condition, ICSI technique, and ICSI operator were assessed as variables influencing the fertilization rate. We also assessed the impact of patient age, serum E(2) concentration on the day of hCG administration, embryo quality, and number of embryos transferred on the probability of achieving a clinical pregnancy.

MAIN OUTCOME MEASURE(S)

Fertilization rate and clinical pregnancy.

RESULT(S)

The 2 pronuclei (2PN) rate was significantly correlated with sperm motility, and there were significant differences in the 2PN rates among the ICSI operators. There was no difference in the 2PN rate among different sperm types or among the eight laboratory incubators or whether the eggs were cultured individually or in groups. Patient age, serum E(2) concentration on the day of hCG administration, embryo quality, and number of embryos transferred were all statistically significant predictors of clinical pregnancy.

CONCLUSION(S)

In our program, sperm motility and ICSI operator are the two most important predictors for the ICSI fertilization rate in vitro. Patient age, serum E(2) concentration on the day of hCG administration, embryo quality, and number of embryos transferred were all statistically significant predictors of clinical pregnancy.

Transfer at the blastocyst stage of embryos derived from testicular round spermatid injection

BACKGROUND

Intracytoplasmic injection of testicular round spermatids has been suggested as a salvage treatment in couples when testicular sperm extraction does not yield any mature sperm. However, the success of the procedure is debatable, and controversy surrounds issues such as the presence and (if present) identification of spermatids in testicular tissue. Progression rate to the blastocyst stage of spermatid-derived embryos appears to be low.

METHODS

In this study, we investigated the feasibility and outcome of blastocyst stage embryo transfer after round spermatid injection (ROSI). ROSI was undertaken in 58 couples who did not yield mature or elongated sperm to testicular sperm extraction.

RESULTS

The incidence of blastocyst formation from two pronuclear oocytes was 7.6%. A total of 16 blastocysts were transferred in 12 patients (20.7%). None of the patients conceived.

CONCLUSIONS

The results of this study indicate that the blastocyst stage is reached by only very few ROSI-derived embryos and these embryos do not implant.

Births after vitrification at morula and blastocyst stages: effect of artificial reduction of the blastocoelic cavity before vitrification

BACKGROUND

In 1996, with the introduction of sequential media, we set up a programme of cryopreservation of supernumerary morulae (day 4) and blastocysts (day 5) using a vitrification procedure. Our results showed that the efficiency of the vitrification method was dependent on the stage of embryo development and was negatively correlated with the expansion of the blastocoele. We postulated that a large blastocoele might disturb cryopreservative potential due to ice crystal formation during the cooling step. We analysed therefore the effectiveness of reducing before vitrification the volume of the blastocoelic cavity.

METHOD

Day 4 and day 5 embryos were vitrified in 40% ethylene glycol-18% Ficoll and 0.3 mol/l sucrose before plunging the straws directly into liquid nitrogen. Artificial shrinkage of the blastocyst was achieved after pushing a needle into the blastocoele cavity until it contracted.

RESULTS

The survival rate post-thawing of day 4 and intact day 5 embryos was correlated with the volume of the blastocoele. In the control group only 20.3% blastocysts or expanded blastocysts survived as compared with 54.5 and 58.5% with morulae and early blastocyst respectively. After puncturing the blastocoelic cavity, an increase in the survival rate of up to 70.6% was noted. The pregnancy rates were improved after the artificial shrinkage procedure (20.5%) compared with the control intact blastocyst group (4.5%) (not significant). After reduction of the blastocoelic cavity, a significant increase in the implantation rate per vitrified blastocyst was observed (12.0 versus 1.4% P < 0.01).

CONCLUSIONS

Our results showed that survival rates in cryopreserved expanded blastocysts could be improved by reducing the fluid content. This was presumably because mechanical damage caused by ice crystal formation was avoided. These observations should be considered when establishing a strategy and a protocol for cryopreservation of day 5 embryos.

Intracytoplasmic sperm injection in assisted reproductive technology: an evaluation

Since the first reports of successful pregnancies in humans after treatment with intracytoplasmic sperm injection (ICSI), intensive investigations have focused on several important aspects of this form of assisted reproductive technology. In addition to the technical development of ICSI and increasing understanding of the biochemical and biophysical processes involved during fertilization after injection of an immobilized sperm, studies have aimed to define the indications for patients for a first-line ICSI treatment. One of the major concerns is of course the safety of the technique in terms of the health and reproductive life of the babies born after ICSI. The rhesus monkey is an excellent model to investigate all aspects of this micromanipulation technique. This article provides an evaluation of ICSI.

Novel use of laser to assist ICSI for patients with fragile oocytes: a case report

An inadvertent consequence of intracytoplasmic sperm injection (ICSI) is the degeneration of some of the microinjected oocytes. Most patients may not suffer any disadvantage through losing oocyte(s) during micromanipulation; however, in some circumstances, this can result in a reduction of the chances for pregnancy. This study reports a clinical pregnancy obtained by a novel approach using laser-assisted micro-opening of the zona pellucida prior to ICSI to secure a non-traumatic microinjection that avoids degeneration of oocytes. A total of 12 oocytes were obtained from the 36 year old patient in her third IVF treatment cycle, following two previously failed attempts where very high degeneration rates of oocytes after ICSI were recorded, together with suboptimal embryo quality. Five of the 11 matured (MII) oocytes were submitted to conventional ICSI and the other six MII oocytes first underwent laser-assisted opening of the zona pellucida (5-7 microm hole size was created with a 1.48 microm diode laser) before microinjection (LA-ICSI). Three of the five conventionally microinjected oocytes degenerated while one oocyte fertilized normally and developed to a good quality embryo. After the LA-ICSI procedure, one of the six oocytes degenerated and four oocytes fertilized normally; of these, two developed to excellent quality embryos, one to a good quality embryo and one to a poor quality embryo. The three best embryos (LA-ICSI group) were transferred to the patient on day 3. Rising serum human chorionic gonadotrophin concentrations were measured 12 days after transfer and on week 7 two implantation sites were detected, together with regular heart activity. The results of the present report suggest that laser-assisted ICSI may provide a safer approach to non-traumatic microinjection of oocytes than conventional ICSI, thereby minimizing the risk of degeneration and possibly also improving embryo quality. Therefore, it is suggested that laser-assisted ICSI might be applied in all cases associated with difficult zona pellucida penetration or/and fragile oolemma, or where patients have very few oocytes available, to improve the chances for pregnancy.

Laser assisted immobilization of spermatozoa prior to intracytoplasmic sperm injection in humans

BACKGROUND

The conventional method of immobilization of spermatozoa prior to intracytoplasmic sperm injection (ICSI) is mechanical breakage of the tail by pressing it against the bottom of the injection dish.

METHODS

This prospective self-controlled study was set up to evaluate the potential of a non-contact 1.48 microm wavelength diode laser in terms of immobilization. In addition, the fertilization rate and further development potential of such zygotes were investigated. The patients included in our study (n = 60) had oestradiol concentrations >2000 pg/ml, and thus a relatively high number of MII oocytes could be expected. Approximately half the oocytes were injected with laser treated spermatozoa (n = 262, study group) and the other half with mechanically immobilized spermatozoa (n = 252, control group).

RESULTS

No significant differences between the two groups in terms of fertilization rate, early cleavage or blastocyst formation were observed. However, time required for identification, aspiration and injection of a potential spermatozoa was significantly shorter in the laser immobilized sperm group (P < 0.001).

CONCLUSIONS

The application of a non-contact diode laser for sperm immobilization prior to ICSI is a potentially useful alternative to the conventional mechanical approach.

A prospective study on oocyte survival rate after ICSI: influence of injection technique and morphological features

PURPOSE

To determine the influence of technical pitfalls and oocyte morphology on survival rate and cleavage behavior after ICSI.

METHODS

A total of 2210 injection procedures was examined for morphological and technical deviations. Survival rate and cleavage behavior were evaluated.

RESULTS

In 77.8% of all cases ICSI was unsuspicous. Out of 491 deviations from optimal injection deep penetration of the oocyte and abundant presence of cumulus cells showed significant correlation with degeneration rate (p < 0.001). Morphological anomalies associated with the periphery of the oocyte were rather related to degeneration than cytoplasmic anomalies (p < 0.001). Early embryonic development was not impaired by technical or morphological parameters.

CONCLUSIONS

To conclude, these prospective data may be of prognostic value in regard of the number of embryos available for transfer and may help to improve treatment outcome.

Ultrasound-guided embryo transfer maximizes the IVF results on day 3 and day 4 embryo transfer but has no impact on day 5

BACKGROUND

The use of ultrasound-guided embryo transfer has been reported to affect success rates in some centres but not others. In a prospective study, we examined the influence of ultrasound guidance in embryo transfer performed on different days after oocyte retrieval.

METHODS

Two different methods of embryo transfer were evaluated in 1069 consecutive transfers. The ultrasound-guided embryo transfer was used in 433 cases, whereas 636 embryo transfers were performed with the tactile assessment ('clinical feel') method.

RESULTS

Ultrasound-guided embryo transfer yielded a higher overall pregnancy rate than the 'clinical feel' approach, 47 versus 36% (P < 0.001). This difference was statistically significant where embryos were transferred after 3 or 4 days of culture, 45.9 versus 37.1% (P = 0.001) and 42.3 versus 27% (P = 0.035) respectively but not significant (P = 0.112) on day 5 embryo transfer (56.3 versus 45.7%). Likewise, the implantation rate was significantly different between the two groups on day 3 and 4 embryo transfer, 23.3 versus 15.8% (P < 0.01) and 21.6 versus 15.7% (P < 0.05%) respectively but no statistical difference was noted on day 5 embryo transfer, 26.7 versus 23.6%.

CONCLUSION

Ultrasound assistance in embryo transfer on day 3 and 4 significantly improved pregnancy rates in IVF but had no impact on day 5.

Performing ICSI using an injection pipette with the smallest possible inner diameter and a long taper increases normal fertilization rate, decreases incidence of degeneration and tripronuclear zygotes, and enhances embryo development

PURPOSE

To compare the efficacy of two types of injection pipette used for ICSI, one with a larger (5-7 microns) inner diameter and a shorter taper with that inner diameter, and another with the smallest (3-5 microns) possible inner diameter and a longer taper with that inner diameter.

METHODS

Retrieved oocytes at metaphase II stage were injected using one of two types of injection pipette, in 33 and 94 cycles, respectively, in a total of 127 cycles in 108 patients.

RESULTS

In comparison to the injection pipette with a larger (5-7 microns) inner diameter and a shorter taper with that inner diameter, the injection pipette with the smallest (3-5 microns) possible inner diameter and a longer taper with that inner diameter increased normal fertilization rate ((70 +/- 3.6)% vs. (86 +/- 2.2)%; P = .001; mean +/- SEM); decreased the incidence of degeneration ((14 +/- 2.4)% vs. (5 +/- 1.4)%; P = .001) and tripronuclear zygotes ((1.0 +/- 0.35)% vs. (0.1 +/- 0.21)%; P = .03); increased Day-2 diploid embryos ((69 +/- 3.7)% vs. (85 +/- 2.2)%; P = .001) and good-quality Day-2 diploid embryos ((67 +/- 4.0)% vs. (79 +/- 2.4)%; P = .03), all per injected oocyte; and increased the number of blastomeres per good-quality Day-2 diploid embryo ((3.0 +/- 0.21 vs. 3.8 +/- 0.12; P = .0003).

CONCLUSIONS

Performing ICSI using an injection pipette with the smallest (3-5 microns) possible inner diameter and a longer taper with that inner diameter maximizes normal fertilization rate, minimizes the incidence of postinjection degeneration and tripronuclear zygotes, and enhances embryo development.

Influence of sperm immobilization on onset of Ca(2+) oscillations after ICSI

Sperm immobilization prior to intracytoplasmic sperm injection (ICSI) is thought to be necessary for efficient fertilization. A variety of methods of sperm immobilization (pipetting, squeezing and piezo application) are currently employed in ICSI. The effect of differences in immobilization method on the timing of initial Ca(2+) oscillations of oocytes in ICSI was investigated. Motile spermatozoa were immobilized in eosin Y solution using pipetting, squeezing and piezo application. Complete staining of the sperm head was achieved after 220.7, 42.2 and 5.0 s respectively. Oscillations after ICSI were measured fluorometrically for each method. The onset of Ca(2+) oscillations was observed at 4.8 to 80.4 min after ICSI. Ca(2+) oscillations developed earlier with the piezo method (14.4 +/- 6.4 min) than other methods (pipetting, 43.1 +/- 20.2 min, P < 0.01; squeezing, 18.4 +/- 3.8 min, P = NS). The piezo method produced the earliest staining of the sperm head and may have caused the most damage to the sperm membrane. A more rapid onset of Ca(2+) oscillations was also observed with the piezo method. The method of sperm immobilization may be important for the rapid release of sperm factors that initiate oocyte activation. This study also showed that Ca(2+) oscillations develop earlier in human oocytes treated by ICSI than indicated in previous reports.

Progression to the blastocyst stage of embryos derived from testicular round spermatids

Progression to the blastocyst stage of embryos derived from testicular round spermatids in men with non-obstructive azoospermia was studied. A total of 56 men were studied in whom partial spermatogenesis failure had occurred where only very few spermatozoa (fewer than the number of oocytes retrieved) were extracted from multiple testicular biopsy specimens. Oocytes remaining after intracytoplasmic injection of testicular spermatozoa (group 1) were injected with round spermatids (ROSI, group 2). Only embryos derived from group 1 were transferred. Remaining embryos were observed under culture for 8 days and their progression to the blastocyst stage was recorded. Of the 546 oocytes injected with testicular spermatozoa, 404 (73.9%) showed evidence of 2-pronuclear (2PN) fertilization. Injection of testicular round spermatids resulted in 2PN fertilization rate of 50% (P < 0.05). Using a four-point grading system, 53% of the good quality embryos (grade 1 or 2) in group 1 reached the blastocyst stage compared with 25% in group 2 (P < 0.05). The rate of progression to the blastocyst stage of grade 3 and grade 4 embryos was 46 and 8.5% in the two groups respectively (P < 0.05). Using a different three-point grading system for the blastocysts, 75.3% of the blastocysts in group 1 were either grade 1 or grade 2 and 24.7% were grade 3. However, in group 2 all blastocysts were grade 3. All embryos observed in group 1 reached the blastocyst stage by day 5 or 6 compared with 25% of the embryos reaching the blastocyst stage by this time in group 2. While 31.2% of the blastocysts in group 1 showed evidence of spontaneous hatching in vitro, none of the blastocysts in group 2 hatched. In conclusion, progression to the blastocyst stage occurred at a much lower and slower rate in embryos derived from testicular round spermatids. Furthermore, all blastocysts resulting from ROSI were of poor quality and none showed spontaneous hatching. These results may explain the dismal outcome associated with ROSI.

Assessment of maximal fertilization rates with intracytoplasmic sperm injection

PURPOSE

Maximal fertilization rates following ICSI were assessed using two essential steps: immobilization of sperm and aspiration of oocyte cytoplasm.

METHODS

ICSI procedure was performed for couples (N = 42) in whom the male suffered severe infertility or failure of fertilization in previous IVF cycle using different oocyte cytoplasmic aspiration and sperm immobilization methods. Outcome in four patient groups was measured by oocyte damage, fertilization rate, and pregnancy rate.

RESULTS

Maximal fertilization (90%) were achieved from the group which used immobilization of sperm by hard-touching the tail with a pipette and optimal aspiration of oocyte cytoplasm.

CONCLUSIONS

The results suggest that if the immobilization of sperm and aspiration of oocyte cytoplasm are handled right during ICSI, this procedure can be expected to yield a 90% fertilization rate.

Oocyte insemination with spermatozoa precursors

Since the use of testicular spermatozoa in programs of assisted fertilization proved very successful, attention was focussed on the use of spermatids also carrying 23 chromosomes. Several difficulties became obvious; the first one concerned the recognition of round spermatids. This is a problem which does not concern elongating and elongated cells. The intra-cytoplasmic injection of elongated spermatids resulted in several pregnancies but this is not so for the round ones. Although, in the group of patients in whom only round spermatids are found at the time of the attempt, is to be divided into two categories; patients in whom previous research allowed to find spermatozoa, however few, and patients who never produced spermatozoa at all. This last group is no longer an indication for intracytoplasmic sperm injection procedure unless in the future new culture media allow a maturation into elongated forms.

Intracytoplasmic sperm injection: position of the polar body affects pregnancy rate

A prospective study on intracytoplasmic sperm injection (ICSI) was performed to evaluate the effect of the position of the polar body relative to the opening of the injection needle during sperm injection, and of the person who performs the injections on fertilization, cleavage, and pregnancy rates. This study included 173 couples undergoing 313 ICSI cycles from September 1995 to December 1997. All injections were performed by two persons. For each injected oocyte the person who performed the injection was recorded as well as the position of the polar body during injection (6 o'clock: animal pole towards the opening of the needle; 12 o'clock: animal pole away from the opening of the needle). Of 2630 oocytes retrieved, 2232 were injected. Significantly more oocytes developed two pronuclei after injection with the polar body at 6 o'clock versus 12 o'clock (P = 0.01; 51 versus 45% respectively) and after injection by person 1 versus person 2 (P = 0.02; 50 and 45% respectively). Higher pregnancy rate (P = 0.046) was found after transfer of embryos from oocytes injected with the polar body at 6 o'clock (36%) versus 12 o'clock (18%). This was the result of a significant interaction (P = 0.03) between the position of the polar body and the person performing the injections. Given the higher fertilization rate in the 6 o'clock group, it is recommended that oocytes be injected with the polar body at 6 o'clock. The higher pregnancy rate as a result of polar body position and the interaction between polar body position and the operator suggest variations in injection technique.

Fertilization, embryo quality, and cryosurvival in in vitro fertilization and intracytoplasmic sperm injection cycles

PURPOSE

Our purpose was to investigate the influence of semen quality on fertilization, embryo morphology, cleavage, and cryosurvival in conventional in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI) programs.

METHODS

A retrospective analysis of 513 couples undergoing IVF and 255 couples undergoing ICSI was done.

RESULTS

Semen quality influenced fertilization in IVF and abnormal fertilization in IVF and ICSI, but no effects on the development, morphology, implantation capacity, or cryosurvival of embryos were found. Fertilization, embryo quality, and cryosurvival rates were similar after IVF and ICSI. The fertilization rate of mature oocytes in IVF was lower when cytoplasmic immaturity in the oocyte population was frequent. The speed of development of embryos was 2 hr faster after ICSI than after IVF. Two-cell-stage embryos survived best after cryopreservation with propanediol and sucrose on day 2.

CONCLUSIONS

After fertilization, semen parameters had no effect on the quality or cryosurvival of embryos in either IVF or ICSI.