Long-range organization and sequence-directed curvature of Xenopus laevis satellite 1 DNA

Transposable Elements as a Source of Novel Repetitive DNA in the Eukaryote Genome

The impact of transposable elements (TEs) on the evolution of the eukaryote genome has been observed in a number of biological processes, such as the recruitment of the host's gene expression network or the rearrangement of genome structure. However, TEs may also provide a substrate for the emergence of novel repetitive elements, which contribute to the generation of new genomic components during the course of the evolutionary process. In this review, we examine published descriptions of TEs that give rise to tandem sequences in an attempt to comprehend the relationship between TEs and the emergence of de novo satellite DNA families in eukaryotic organisms. We evaluated the intragenomic behavior of the TEs, the role of their molecular structure, and the chromosomal distribution of the paralogous copies that generate arrays of repeats as a substrate for the emergence of new repetitive elements in the genome. We highlight the involvement and importance of TEs in the eukaryote genome and its remodeling processes.

Conversion of DNA Sequences: From a Transposable Element to a Tandem Repeat or to a Gene

Eukaryotic genomes are rich in repetitive DNA sequences grouped in two classes regarding their genomic organization: tandem repeats and dispersed repeats. In tandem repeats, copies of a short DNA sequence are positioned one after another within the genome, while in dispersed repeats, these copies are randomly distributed. In this review we provide evidence that both tandem and dispersed repeats can have a similar organization, which leads us to suggest an update to their classification based on the sequence features, concretely regarding the presence or absence of retrotransposons/transposon specific domains. In addition, we analyze several studies that show that a repetitive element can be remodeled into repetitive non-coding or coding sequences, suggesting (1) an evolutionary relationship among DNA sequences, and (2) that the evolution of the genomes involved frequent repetitive sequence reshuffling, a process that we have designated as a "DNA remodeling mechanism". The alternative classification of the repetitive DNA sequences here proposed will provide a novel theoretical framework that recognizes the importance of DNA remodeling for the evolution and plasticity of eukaryotic genomes.

Structural and functional liaisons between transposable elements and satellite DNAs

Transposable elements (TEs) and satellite DNAs (satDNAs) are typically identified as major repetitive DNA components in eukaryotic genomes. TEs are DNA segments able to move throughout a genome while satDNAs are tandemly repeated sequences organized in long arrays. Both classes of repetitive sequences are extremely diverse, and many TEs and satDNAs exist within a genome. Although they differ in structure, genomic organization, mechanisms of spread, and evolutionary dynamics, TEs and satDNAs can share sequence similarity and organizational patterns, thus indicating that complex mutual relationships can determine their evolution, and ultimately define roles they might have on genome architecture and function. Motivated by accumulating data about sequence elements that incorporate features of both TEs and satDNAs, here we present an overview of their structural and functional liaisons.

Tandem repeats derived from centromeric retrotransposons

Background

Tandem repeats are ubiquitous and abundant in higher eukaryotic genomes and constitute, along with transposable elements, much of DNA underlying centromeres and other heterochromatic domains. In maize, centromeric satellite repeat (CentC) and centromeric retrotransposons (CR), a class of Ty3/gypsy retrotransposons, are enriched at centromeres. Some satellite repeats have homology to retrotransposons and several mechanisms have been proposed to explain the expansion, contraction as well as homogenization of tandem repeats. However, the origin and evolution of tandem repeat loci remain largely unknown.

Results

CRM1TR and CRM4TR are novel tandem repeats that we show to be entirely derived from CR elements belonging to two different subfamilies, CRM1 and CRM4. Although these tandem repeats clearly originated in at least two separate events, they are derived from similar regions of their respective parent element, namely the long terminal repeat (LTR) and untranslated region (UTR). The 5^′ ends of the monomer repeat units of CRM1TR and CRM4TR map to different locations within their respective LTRs, while their 3^′ ends map to the same relative position within a conserved region of their UTRs. Based on the insertion times of heterologous retrotransposons that have inserted into these tandem repeats, amplification of the repeats is estimated to have begun at least ~4 (CRM1TR) and ~1 (CRM4TR) million years ago. Distinct CRM1TR sequence variants occupy the two CRM1TR loci, indicating that there is little or no movement of repeats between loci, even though they are separated by only ~1.4 Mb.

Conclusions

The discovery of two novel retrotransposon derived tandem repeats supports the conclusions from earlier studies that retrotransposons can give rise to tandem repeats in eukaryotic genomes. Analysis of monomers from two different CRM1TR loci shows that gene conversion is the major cause of sequence variation. We propose that successive intrastrand deletions generated the initial repeat structure, and gene conversions increased the size of each tandem repeat locus.

Analysis of the single-nucleotide polymorphism in the 5'UTR and part of intron I of the sheep MSTN gene

The myostatin (MSTN) gene region encompassing the 5'UTR and part of intron I was sequenced in animals of two herds of Latvian Darkhead sheep to extend data on the ovine MSTN gene polymorphism and to provide information useful for local breed conservation. Two and four polymorphic loci were revealed in the 5'UTR and intron I. Four and five local haplotypes were constructed, respectively. The genotyping data obtained and that previously reported for the same genomic region were combined in one dataset for the haplotype analysis. Recombination events were detected between loci (c.-40, c.-37) in the 5'UTR and (c.373+18, c.373+101) and (c.373+101, c.373+241) in intron I. Single-nucleotide polymorphisms at c.373+249 and c.373+323 appear to be involved in the strong linkage (p < 0.01). Linkage blocks (c.373+241, c.373+243) and (c.373+241, c.373+259) were revealed at nominal (p < 0.05) level of probability. Haplotype-specific patterns of the transcription factor binding sites predicted in silico were constructed to evaluate a putative functional significance of the particular alleles and haplotypes. A nucleotide at c.373+18 was shown to influence the pre-mRNA secondary structure. DNA curvature predicted in silico for allele c.373+101C was proven experimentally. A possible impact of the particular polymorphisms on the transcription and/or splicing efficiency is discussed.

Intrinsically bent DNA sites in the Drosophila melanogaster third chromosome amplified domain

Bent DNA sites promote the curvature of DNA in both eukaryotic and prokaryotic chromosomes. Here, we investigate the localization and structure of intrinsically bent DNA sites in the extensively characterized Drosophila melanogaster third chromosome DAFC-66D segment (Drosophila amplicon in the follicle cells). This region contains the amplification control element ACE3, which is a replication enhancer that acts in cis to activate the major replication origin ori-beta. Through both electrophoretic and in silico analysis, we have identified three major bent DNA sites in DAFC-66D. The bent DNA site (b1) is localized in the ACE3 element, whereas the other two bent DNA sites (b2 and b3) are localized in the ori-beta region. Four additional bent DNA sites were identified in the intron of the S18 gene and near the TATA box of the S15, S19, and S16 genes. The identification of DNA bent sites in genomic regions previously characterized as functionally relevant for DNA amplification further supports a function for DNA bent sites in DNA replication in eukaryotes.

Intrinsic bent DNA colocalizes with the sequence involved in the Nd-sD mutation in the Bombyx mori fibroin light chain gene

Multiple sequence alignments of the Bombyx mori fibroin light chain gene (fib-L) from hybrids and from Chinese and Japanese strains demonstrated that 51.6% of the fib-L third intron is conserved. One of these conserved segments, 41 bp long, contains the sequence CGTTATTATACATATT, which is duplicated in the B. mori Nd-s(D) mutant. In the present work, electrophoretic mobility assays and computational analyses revealed a major peak of intrinsic bent DNA within the segment that undergoes breakage in the previously-described Nd-s(D) mutation. This result suggested that this intrinsically-curved region might mediate DNA cleavage and enhance recombination events in the third intron of the Bombyx mori fib-L gene.

Intrinsic bent DNA sites in the chromosomal replication origin of Xylella fastidiosa 9a5c

The features of the nucleotide sequences in both replication and promoter regions have been investigated in many organisms. Intrinsically bent DNA sites associated with transcription have been described in several prokaryotic organisms. The aim of the present study was to investigate intrinsic bent DNA sites in the segment that holds the chromosomal replication origin, oriC, of Xylella fastidiosa 9a5c. Electrophoretic behavior analyses, as well as in silico analyses of both the 2-D projection and helical parameters, were performed. The chromosomal segment analyzed contains the initial sequence of the rpmH gene, an intergenic region, the dnaA gene, the oriC sequence, and the 5' partial sequence of the dnaN gene. The analysis revealed fragments with reduced electrophoretic mobility, which indicates the presence of curved DNA segments. The analysis of the helical parameter ENDS ratio revealed three bent DNA sites (b1, b2, and b3) located in the rpmH-dnaA intergenic region, the dnaA gene, and the oriC 5' end, respectively. The chromosomal segment of X. fastidiosa analyzed here is rich in phased AT tracts and in CAnT motifs. The 2-D projection indicated a segment whose structure was determined by the cumulative effect of all bent DNA sites. Further, the in silico analysis of the three different bacterial oriC sequences indicated similar negative roll and twist >34.00 degrees values. The DnaA box sequences, and other motifs in them, may be associated with the intrinsic DNA curvature.

DNA bending in the replication zone of the C3 DNA puff amplicon of Rhynchosciara americana (Diptera: Sciaridae)

Intrinsic bent DNA sites were identified in the 4289 bp segment encompassing the replication zone which directs DNA amplification and transcription of the C3-22 gene of Rhynchosciara americana. Restriction fragments showed reduced electrophoretic mobility in polyacrylamide gels. The 2D modeling of the 3D DNA path and the ENDS ratio values obtained from the dinucleotide wedge model of Trifonov revealed the presence of four major bent sites, positioned at nucleotides -6753, -5433, -5133 and -4757. Sequence analysis showed that these bends are composed of 2-6 bp dA.dT tracts in phase with the DNA helical repeat. The circular permutation analysis permitted the verification that the fragments containing the bending sites promote curvature in other sequence contexts. Computer analyses of the 4289 bp sequence revealed low helical stability (DeltaG values), negative roll angles indicating a narrow minor groove and a putative matrix attachment region. The data presented in this paper add to information about the structural features involved in this amplified segment.

Retand: a novel family of gypsy-like retrotransposons harboring an amplified tandem repeat

In this paper we describe a pair of novel Ty3/gypsy retrotransposons isolated from the dioecious plant Silene latifolia, consisting of a non-autonomous element Retand-1 (3.7 kb) and its autonomous partner Retand-2 (11.1 kb). These two elements have highly similar long terminal repeat (LTR) sequences but differ in the presence of the typical retroelement coding regions (gag-pol genes), most of which are missing in Retand-1. Moreover, Retand-2 contains two additional open reading frames in antisense orientation localized between the pol gene and right LTR. Retand transcripts were detected in all organs tested (leaves, flower buds and roots) which, together with the high sequence similarity of LTRs in individual elements, indicates their recent transpositional activity. The autonomous elements are similarly abundant (2,700 copies) as non-autonomous ones (2,100 copies) in S. latifolia genome. Retand elements are also present in other Silene species, mostly in subtelomeric heterochromatin regions of all chromosomes. The only exception is the subtelomere of the short arm of the Y chromosome in S. latifolia which is known to lack the terminal heterochromatin. An interesting feature of the Retand elements is the presence of a tandem repeat sequence, which is more amplified in the non-autonomous Retand-1.

Localization of repetitive DNA sequences on in vitro Xenopus laevis chromosomes by primed in situ labeling (PRINS)

Xenopus laevis is an important reference model organism used in many vertebrate studies. Gene mapping in X. laevis, in comparison to other reference organisms, is in its early stages. Few studies have been conducted to localize DNA sequences on X. laevis chromosomes. Primed in situ labeling (PRINS) is a recently developed innovative tool that has been used to locate specific DNA sequences in various organisms. PRINS has been reported to have increased sensitivity compared to other in situ hybridization techniques. In the present study, PRINS was first used to label the location of telomeres at the ends of in vitro X. laevis chromosomes. The terminal location was as expected from in vivo reports, however, the overall amount seemed to decrease in the in vitro chromosomes. Once the PRINS technique was optimized, this technique was used to determine the chromosomal location of the satellite 1 repetitive sequence, which is an important sequence in X. laevis development. The sequence was observed on the interstitial regions of the majority of the chromosomes similar to the in vivo locations reported. In contrast to the telomeric sequence, the amount of sequence appeared to increase in the satellite 1 sequence. PRINS was found to be useful in the localization of repetitive DNA sequences in the X. laevis genome.

Sobo, a recently amplified satellite repeat of potato, and its implications for the origin of tandemly repeated sequences

Highly repetitive satellite DNA sequences are main components of heterochromatin in higher eukaryotic genomes. It is well known that satellite repeats can expand and contract dramatically, which may result in significant genome size variation among genetically related species. The origin of satellite repeats, however, is elusive. Here we report a satellite repeat, Sobo, from a diploid potato species, Solanum bulbocastanum. The Sobo repeat is mapped to a single location in the pericentromeric region of chromosome 7. This single Sobo locus spans approximately 360 kb of a 4.7-kb monomer. Sequence analysis revealed that the major part of the Sobo monomer shares significant sequence similarity with the long terminal repeats (LTRs) of a retrotransposon. The Sobo repeat was not detected in other Solanum species and is absent in some S. bulbocastanum accessions. Sobo monomers are highly homogenized and share >99% sequence identity. These results suggest that the Sobo repeat is a recently emerged satellite and possibly originated by a sudden amplification of a genomic region including the LTR of a retrotransposon and its flanking genomic sequences.

Structure-specific DNA-binding proteins as the foundation for three-dimensional chromatin organization

Any functions of tandem repetitive sequences need proteins that specifically bind to them. Telomere-binding TRF2/MTBP attaches telomeres to the nuclear envelope in interphase due to its rod-domain-like motif. Interphase nuclei organized as a number of sponge-like ruffly round chromosome territories that could be rotated from outside. SAF-A/hnRNP-U and p68-helicase are proteins suitable to do that. Their location in the interchromosome territory space, ATPase domains, and the ability to be bound by satellite DNAs (satDNA) make them part of the wires used to help chromosome territory rotates. In case of active transcription p68-helicase can be involved in the formation of local "gene expression matrices" and due to its satDNA-binding specificity cause the rearrangement of the local chromosome territory. The marks of chromatin rearrangement, which have to be heritable, could be provided by SAF-A/hnRNP-U. During telophase unfolding the proper chromatin arrangement is restored according to these marks. The structural specificity of both proteins to the satDNAs provides a regulative but relatively stable mode of binding. The structural specificity of protein binding could help to find the "magic" centromeric sequence. With future investigations of proteins with the structural specificity of binding during early embryogenesis, when heterochromatin formation goes on, the molecular mechanisms of the "gene gating" hypothesis (Blobel, 1985) will be confirmed.

Mapping of intrinsic bent DNA sites in the upstream region of DNA puff BhC4-1 amplified gene

We have identified bent DNA sites in the distal and proximal DNA puff BhC4-1 amplified gene promoter region of Bradysia hygida. The 2D modeling of the 3D DNA path and the ENDS ratio values calculated in this promoter region resulted in the identification of ten pronounced bent sites named BhC4B - 9 to + 1. The 1847 bp fragment (- 3697 to - 1850) in relation to the transcription start site shows multiple bending sites, BhC4B - 9 to BhC4B - 4, with periodicity approximately 300 bp. The analysis of the other identified bent region, starting at position - 957, reveals that the BhC4B + 1 bent site colocalizes with the putative BhC4-1 minimal promoter. The sequence analysis of bent site BhC4B - 4 shows a distribution of dA*dT at approximately 10 bp intervals between the middle of each tract, but intervals with more than one turn, approximately 20 bp, two helix turns, were detected in the other bent sites described here. The bent sites BhC4B - 6 and BhC4B - 4, contain two consensus sequences, with 60 bp each. The apparent molecular weight of fragments in the BhC4-1 promoter region were estimated in agarose gels and compared with the data obtained in polyacrylamide gels without and with ethidium bromide. The mobility reduction ratios (R-values) were determined, and a high R-value, 1.80, for a 1215 bp fragment in the distal promoter region and a 1.23 significant R-value for a 662 bp fragment in the proximal segment were found. To further analyze the predicted bent DNA sites in these fragments, the 2D trajectories of the 3D DNA path and other parameters, AT percentage, roll angle, ENDS ratio and DeltaG, were determined. The role of these bent sites in the BhC4-1 transcription regulation is discussed.

Only centromeres can supply the partition system required for ARS function in the yeast Yarrowia lipolytica

Autonomously replicating sequences (ARSs) in the yeast Yarrowia lipolytica require two components: an origin of replication (ORI) and centromere (CEN) DNA, both of which are necessary for extrachromosomal maintenance. To investigate this cooperation in more detail, we performed a screen for genomic sequences able to confer high frequency of transformation to a plasmid-borne ORI. Our results confirm a cooperation between ORI and CEN sequences to form an ARS, since all sequences identified in this screen displayed features of centromeric DNA and included the previously characterized CEN1-1, CEN3-1 and CEN5-1 fragments. Two new centromeric DNAs were identified as they are unique, map to different chromosomes (II and IV) and induce chromosome breakage after genomic integration. A third sequence, which is adjacent to, but distinct from the previously characterized CEN1-1 region was isolated from chromosome I. Although these CEN sequences do not share significant sequence similarities, they display a complex pattern of short repeats, including conserved blocks of 9 to 14 bp and regions of dyad symmetry. Consistent with their A+T-richness and strong negative roll angle, Y. lipolytica CEN-derived sequences, but not ORIs, were capable of binding isolated Drosophila nuclear scaffolds. However, a Drosophila scaffold attachment region that functions as an ARS in other yeasts was unable to confer autonomous replication to an ORI-containing plasmid. Deletion analysis of CEN1-1 showed that the sequences responsible for the induction of chromosome breakage could be eliminated without compromising extrachromosomal maintenance. We propose that, while Y. lipolytica CEN DNA is essential for plasmid maintenance, this function can be supplied by several sub-fragments which, together, form the active chromosomal centromere. This complex organization of Y. lipolytica centromeres is reminiscent of the regional structures described in the yeast Schizosaccharomyces pombe or in multicellular eukaryotes.

A novel interspersed type of organization of satellite DNAs in Tribolium madens heterochromatin

Analysis of arrangement of satellite DNA sequences in Tribolium madens (Insecta, Coleoptera) by Southern analysis of pulsed-field blots and two colour FISH on extended chromosomes and DNA fibres revealed a novel type of heterochromatin organization. Two satellite DNAs, distributed over the whole pericentromeric heterochromatin of all chromosomes form clusters, ranging in size from 150 kb up to several Mb. Within the clusters, both satellites are in the form of highly interspersed, short homogeneous arrays which vary in size with a lowest length limit of only few kb. The longest arrays composed of a single satellite are relatively short, up to 70 kb for satellite I, and up to 45 kb for satellite II. Only a small fraction of about 15% of satellite II is organized in long tandem repeats, while the rest is in the form of only a few repeats intermingled with satellite I. The results indicate that large clusters composed of interspersed arrays of both satellites represent a major component of T. madens heterochromatin, which is mostly devoid of long regions of other sequences. The same organizational pattern probably also includes a region of the functional centromere. We propose that such an organizational pattern of DNA sequences in heterochromatin might be common in genomes characterized by a high rate of interchromosomal exchange. This pattern of organization is different from that in other animal as well as plant species analysed up to now, in which every satellite in heterochromatin is organized in a small number of large separate domains.

Modeling of DNA local parameters predicts encrypted architectural motifs in Xenopus laevis ribosomal gene promoter

We have modeled local DNA sequence parameters to search for DNA architectural motifs involved in transcription regulation and promotion within the Xenopus laevis ribosomal gene promoter and the intergenic spacer (IGS) sequences. The IGS was found to be shaped into distinct topological domains. First, intrinsic bends split the IGS into domains of common but different helical features. Local parameters at inter-domain junctions exhibit a high variability with respect to intrinsic curvature, bendability and thermal stability. Secondly, the repeated sequence blocks of the IGS exhibit right-handed supercoiled structures which could be related to their enhancer properties. Thirdly, the gene promoter presents both inherent curvature and minor groove narrowing which may be viewed as motifs of a structural code for protein recognition and binding. Such pre-existing deformations could simply be remodeled during the binding of the transcription complex. Alternatively, these deformations could pre-shape the promoter in such a way that further remodeling is facilitated. Mutations shown to abolish promoter curvature as well as intrinsic minor groove narrowing, in a variant which maintained full transcriptional activity, bring circumstantial evidence for structurally-preorganized motifs in relation to transcription regulation and promotion. Using well documented X. laevis rDNA regulatory sequences we showed that computer modeling may be of invaluable assistance in assessing encrypted architectural motifs. The evidence of these DNA topological motifs with respect to the concept of structural code is discussed.

Tissue-specific developmental expression of OAX, a Xenopus repetitive element

Approximately 1% of the Xenopus laevis genome consists of highly repetitive DNA known alternatively as OAX (for Oocyte Activation in Xenopus), Satellite I, or Repetitive HindIII Monomer 2. Present as tandemly repeated units of approximately 750 base pairs, OAX encodes a family of small RNA species transcribed by RNA polymerase III. Although the subject of many of the classic studies on early embryonic gene regulation, reports on OAX expression remain contradictory and incomplete. Using whole-mount in situ hybridization and RNase protection assays, we have therefore examined in detail the expression pattern of OAX in Xenopus embryos of various stages. OAX is initially expressed during gastrula stages; by tailbud stages embryos display discrete zones of expression at the dorsal boundary of the cement gland, in the developing somites and differentiating skeletal muscle, as well as in the dorsal aspect of the neural tube. These data demonstrate that OAX is expressed in a dynamic pattern under tight spatial and temporal regulation.

De novo evolution of satellite DNA on the rye B chromosome

The most distinctive region of the rye B chromosome is a subtelomeric domain that contains an exceptional concentration of B-chromosome-specific sequences. At metaphase this domain appears to be the physical counterpart of the subtelomeric heterochromatic regions present on standard rye chromosomes, but its conformation at interphase is less condensed. In this report we show that the two sequence families that have been previously found to make up the bulk of the domain have been assembled from fragments of a variety of sequence elements, giving rise to their ostensibly foreign origin. A single mechanism, probably based on synthesis-dependent strand annealing (SDSA), is responsible for their assembly. We provide evidence for sequential evolution of one family on the B chromosome itself. The extent of these rearrangements and the complexity of the higher-order organization of the B-chromosome-specific families indicate that instability is a property of the domain itself, rather than of any single sequence. Indirect evidence suggests that particular fragments may have been selected to confer different properties on the domain and that rearrangements are frequently selected for their effect on DNA structure. The current organization appears to represent a transient stage in the evolution of a conventional heterochromatic region from complex sequences.

Tandem repeats in complete bacterial genome sequences: sequence and structural analyses for comparative studies

A series of complete bacterial genome sequences have recently become available and powerful methods have been developed for the identification of tandem repeats on a very large scale. It is thus possible to derive extensive comparative descriptions of such repeats at the level of complete genomes, as illustrated here for three different bacterial genomes: Escherichia coli, Haemophilus influenzae, and Mycobacterium tuberculosis. Such sequence analyses can be usefully complemented by structural characterisations of the repeats.

Short DNA fragments without sequence similarity are initiation sites for replication in the chromosome of the yeast Yarrowia lipolytica

We have previously shown that both a centromere (CEN) and a replication origin are necessary for plasmid maintenance in the yeast Yarrowia lipolytica (). Because of this requirement, only a small number of centromere-proximal replication origins have been isolated from Yarrowia. We used a CEN-based plasmid to obtain noncentromeric origins, and several new fragments, some unique and some repetitive sequences, were isolated. Some of them were analyzed by two-dimensional gel electrophoresis and correspond to actual sites of initiation (ORI) on the chromosome. We observed that a 125-bp fragment is sufficient for a functional ORI on plasmid, and that chromosomal origins moved to ectopic sites on the chromosome continue to act as initiation sites. These Yarrowia origins share an 8-bp motif, which is not essential for origin function on plasmids. The Yarrowia origins do not display any obvious common structural features, like bent DNA or DNA unwinding elements, generally present at or near eukaryotic replication origins. Y. lipolytica origins thus share features of those in the unicellular Saccharomyces cerevisiae and in multicellular eukaryotes: they are discrete and short genetic elements without sequence similarity.

A sequence based computational identification of a Drosophila developmentally regulated TATA-less RNA polymerase II promoter and its experimental validation

Many RNA polymerase II promoters lack the characteristic TATA box sequence located -25/-30 nucleotides upstream from the transcription start. In Drosophila, half of the promoters identified so far are TATA-deficient. The yemanuclein-alpha gene whose promoter activity is restricted to oogenesis, falls in this class. A number of upstream and downstream promoter elements have been identified for some TATA-less promoters. The yem-alpha promoter contains none of the consensus elements identified so far. Our work was based on the assumption that the physical parameters of the DNA could be used to predict the location of the yem-alpha promoter. A sequence based computational analysis allowed us to determine the characteristic changes of DNA curvature and helix stability in the presumptive regulatory region. Our experimental data were in good agreement with the computational analysis. We have started to investigate the general value of this approach by analyzing other promoters.

Common DNA structural features exhibited by eukaryotic ribosomal gene promoters

Nucleotide sequences of DNA regions containing eukaryotic ribosomal promoters were analysed using strategies designed to reveal sequence-directed structural features. DNA curvature, duplex stability and pattern of twist angle variation were studied by computer modelling. Although ribosomal promoters are known to lack sequence homology (unless very closely related species are considered), investigation of these structural characteristics uncovered striking homologies in all the taxonomic groups examined so far. This wide conservation of DNA structures, while DNA sequence is not conserved, suggests that the determined structures are fundamental for ribosomal promoter function. Moreover, this result agrees well with the recent observations showing that RNA polymerase I transcription factors have not evolved as intensively as previously suspected.

DNA curvature of the tobacco GRS repetitive sequence family and its relation to nucleosome positioning

Recently, a highly repetitive DNA sequence family (GRS) from tobacco was described in our laboratory. These sequences were found to be localized predominantly in the pericentromeric heterochromatin of tobacco chromosomes. To test the hypothesis that these sequences play an important role in the formation of heterochromatin, we investigated the DNA curvature of the GRS sequences and its possible impact to the chromatin structure at these loci. Application of the nearest-neighbour wedge model of intrinsic DNA curvature for the GRS1 family member predicted two loci of curvature: a major bend at the 5' end of the sequence and a minor bend of opposite direction at the centre of the GRS1. The presence of the major and the minor loci of DNA curvature was studied experimentally using permutation analysis and site-directed mutagenesis. The experimental results were consistent with the computer predictions. We gave evidence that the described DNA curvature is also present in the entire GRS family. Genomic statistical sequencing showed the conservation of the major bend sequence determinants in the members of the GRS family. To investigate the chromatin structure at the GRS sequences, we determined the nucleosome positioning in vivo at these sequences using thermal cycle primer extension. A relation between the curvature pattern and the histone octamer position was observed: the major bend is excluded from the nucleosome surface to the linker region, while the minor bend is distributed along the core DNA. The suggestion is made that the sequences in the minor locus of curvature define the rotational setting of the nucleosome, and a possible role of the major bend as a factor, which defines the translational setting, is discussed.

Kin17, a mouse nuclear zinc finger protein that binds preferentially to curved DNA

Kin17 is a 45 kDa protein encoded by the KIN17 gene located on mouse chromosome 2, band A. The kin17 amino acid sequence predicts two domains, which were shown to be functional: (i) a bipartite nuclear localization signal (NLS) that can drive the protein to the cell nucleus, (ii) a bona fide zinc finger of the C2H2 type. The zinc finger is involved in kin17 binding to double-stranded DNA since a mutant deleted of the zinc finger, kin17 delta 1, showed reduced binding. Single-stranded DNA was bound poorly by kin17. Interestingly, we found that kin17 protein showed preferential binding to curved DNA from either pBR322 or synthetic oligonucleotides. Binding of kin17 to a non-curved DNA segment increased after we had inserted into it a short curved synthetic oligonucleotide. Kin17 delta 2, a mutant deleted of 110 amino acids at the C-terminal end, still exhibited preferential binding to curved DNA and so did kin17 delta 1, suggesting that a domain recognizing curved DNA is located in the protein core.

Interstitial deletions of repetitive DNA blocks in dicentric human Y chromosomes

Cytogenetic analysis of aberrant human Y chromosomes was done by fluorescence in situ hybridization (FISH) with Y specific repetitive DNA probes. It revealed an interstitial deletion of different DNA blocks in two dicentric chromosome structures. One deletion includes the total alphoid DNA structure of one centromeric region. The second deletion includes the total repetitive DYZ5 DNA structure in the pericentromeric region of one short Y arm. Both dicentric Y chromosomes were iso(Yp) chromosomes with break and fusion point located in Yq11, the euchromatic part of the long Y arm. Their phenotypic appearance was "abnormal", resembling small monocentric Yq-chromosomes in metaphase plates. Mosaic cell lines, usually included in karyotypes with dicentric Y chromosomes, were not observed. It is assumed that both deletion events suppress the kinetochore activity in one Y centromeric region and thus stabilize its dicentric structure. Local interstitial deletion events had not been described in dicentric human Y chromosomes, but are common in dicentric yeast chromosomes. This raises the question of whether deletion events in dicentric human chromosomes are rare or restricted to the Y chromosome or also represent a general possibility for stabilization of a dicentric chromosome structure in human.