Rapid, high fidelity analysis of simple sequence repeats on an electronically active DNA microchip

Electric field-enhanced electrochemical CRISPR biosensor for DNA detection

DNA detection plays an important role in the rapid screening of cancers and early diagnosis of infectious diseases. Here, we developed a simple, versatile, electric field-enhanced (EFE), electrochemical CRISPR biosensor to detect DNA targets in a homogeneous solution phase. To improve the detection sensitivity, we applied a pulsed electric field to enrich nucleic acids on the electrode surface. The EFE electrochemical CRISPR biosensor takes advantage of the diffusivity difference between electrochemical oligonucleotide probes and CRISPR-cleaved probes toward a negatively charged working electrode, enabling simple and sensitive electrochemical detection of DNA without the need for complicated immobilization processing of electrochemical probes. Our developed CRISPR biosensor directly detects unamplified human papillomavirus-16 (HPV-16) DNA with a sensitivity of 1 pM. Further, the EFE electrochemical CRISPR biosensor coupled with recombinase polymerase amplification (RPA) successfully detects HPV-16 DNA in clinical samples. Thus, the EFE electrochemical CRISPR biosensor provides a simple, robust, and sensitive detection method for nucleic acid-based molecular diagnostics.

Fate of nitrogen in agriculture and environment: agronomic, eco-physiological and molecular approaches to improve nitrogen use efficiency

Nitrogen is the main limiting nutrient after carbon, hydrogen and oxygen for photosynthetic process, phyto-hormonal, proteomic changes and growth-development of plants to complete its lifecycle. Excessive and inefficient use of N fertilizer results in enhanced crop production costs and atmospheric pollution. Atmospheric nitrogen (71%) in the molecular form is not available for the plants. For world's sustainable food production and atmospheric benefits, there is an urgent need to up-grade nitrogen use efficiency in agricultural farming system. The nitrogen use efficiency is the product of nitrogen uptake efficiency and nitrogen utilization efficiency, it varies from 30.2 to 53.2%. Nitrogen losses are too high, due to excess amount, low plant population, poor application methods etc., which can go up to 70% of total available nitrogen. These losses can be minimized up to 15-30% by adopting improved agronomic approaches such as optimal dosage of nitrogen, application of N by using canopy sensors, maintaining plant population, drip fertigation and legume based intercropping. A few transgenic studies have shown improvement in nitrogen uptake and even increase in biomass. Nitrate reductase, nitrite reductase, glutamine synthetase, glutamine oxoglutarate aminotransferase and asparagine synthetase enzyme have a great role in nitrogen metabolism. However, further studies on carbon-nitrogen metabolism and molecular changes at omic levels are required by using "whole genome sequencing technology" to improve nitrogen use efficiency. This review focus on nitrogen use efficiency that is the major concern of modern days to save economic resources without sacrificing farm yield as well as safety of global environment, i.e. greenhouse gas emissions, ammonium volatilization and nitrate leaching.

Application of automation and information systems to forensic genetic specimen processing

During the last 10 years, the introduction of PCR-based DNA typing technologies in forensic applications has been highly successful. This technology has become pervasive throughout forensic laboratories and it continues to grow in prevalence. For many criminal cases, it provides the most probative evidence. Criminal genotype data banking and victim identification initiatives that follow mass-fatality incidents have benefited the most from the introduction of automation for sample processing and data analysis. Attributes of offender specimens including large numbers, high quality and identical collection and processing are ideal for the application of laboratory automation. The magnitude of kinship analysis required by mass-fatality incidents necessitates the application of computing solutions to automate the task. More recently, the development activities of many forensic laboratories are focused on leveraging experience from these two applications to casework sample processing. The trend toward increased prevalence of forensic genetic analysis will continue to drive additional innovations in high-throughput laboratory automation and information systems.

A review of the application of molecular genetics for fisheries management and conservation of sharks and rays

Since the first investigation 25 years ago, the application of genetic tools to address ecological and evolutionary questions in elasmobranch studies has greatly expanded. Major developments in genetic theory as well as in the availability, cost effectiveness and resolution of genetic markers were instrumental for particularly rapid progress over the last 10 years. Genetic studies of elasmobranchs are of direct importance and have application to fisheries management and conservation issues such as the definition of management units and identification of species from fins. In the future, increased application of the most recent and emerging technologies will enable accelerated genetic data production and the development of new markers at reduced costs, paving the way for a paradigm shift from gene to genome-scale research, and more focus on adaptive rather than just neutral variation. Current literature is reviewed in six fields of elasmobranch molecular genetics relevant to fisheries and conservation management (species identification, phylogeography, philopatry, genetic effective population size, molecular evolutionary rate and emerging methods). Where possible, examples from the Indo-Pacific region, which has been underrepresented in previous reviews, are emphasized within a global perspective.

Covalent immobilization of DNA and hybridization on microchips by microsecond electric field pulses

Single square voltage pulses were used to enhance by 7 and 9 orders of magnitude the rate of covalent immobilization and hybridization, respectively, of single stranded DNA probes on a chemically functionalized thin film surface (silicon dioxide) using 2 mm size electrodes. These electrodes were scaled down to 20 μm. Photolithography was used to define the electrode voltage line, ground line, and functionalized thin-film area on a plastic substrate (polyimide). At all electrode dimensions, electric field-assisted DNA immobilization and hybridization can be achieved in the microsecond time scale, far faster than the 2 hr or 16 hr needed for immobilization and hybridization, respectively, without the electric field. Pulse conditions optimized with the large-size electrodes (2 mm) were used in the microelectrodes.

Interrogation of short tandem repeats using fluorescent probes and melting curve analysis: a step towards rapid DNA identity screening

Current forensic DNA profiling methods rely on the analysis of samples at specialised laboratories with an average turnaround time of several days. The ability to rapidly determine a partial profile of short tandem repeats at the point-of-arrest would be of great benefit to police forces around the world, for example enabling a suspect to be rapidly included or excluded from an investigation. We have developed a homogeneous PCR method for the interrogation of STR loci utilising fluorescent oligonucleotide probes and melting curve analysis. Alleles of the D18S51, TH01 and D8S1179 loci were differentiated and identified on the basis of target length and probe melting temperature. Assay performance was evaluated by comparing melting peak data with the AmpFlSTR SGM Plus system. The method is compatible with direct analysis of unpurified buccal swab samples, enabling a partial STR profile to be generated within 1h.

Investigation into the usefulness of DNA profiling of earprints

DNA profiling of biological trace evidence has been used for many years. The application of this technique specifically to the DNA profiling of earprints has not to date been thoroughly investigated. This report presents the results of 60 earprints collected from three healthy adult volunteers under controlled laboratory conditions. DNA profile analysis revealed that high levels of non-donor alleles are observed when earprints are collected for DNA profiling. The source of these non-donor alleles is investigated and the impact that their presence within the profile may have on the use of this technique is discussed.

Branch migration displacement assay with automated heuristic analysis for discrete DNA length measurement using DNA microarrays

The analysis of short tandem repeats (STRs) plays an important role in forensic science, human identification, genetic mapping, and disease diagnostics. Traditional STR analysis utilizes gel- or column-based approaches to analyze DNA repeats. Individual STR alleles are separated and distinguished according to fragment length; thus the assay is generally hampered by its low multiplex capacity. However, use of DNA microarray would employ a simple hybridization and detection for field forensics and biology. Here we demonstrate a rapid, highly sensitive method for STR analysis that utilizes DNA microarray technology. We describe two adaptations to accomplish this: the use of competitive hybridization to remove unpaired ssDNA from an array and the use of neural network classification to automate the analysis. The competitive displacement technique mimics the branch migration process that occurs during DNA recombination. Our technique will facilitate the rapid deduction of identity, length, and number of repeats for the multiple STRs in an unknown DNA sample.

Genomics and proteomics: importance for the future of nutrition research

A huge number of genes within the human genome code for proteins that mediate and/or control nutritional processes. Although a large body of information on the number of genes, on chromosomal localisation, gene structure and function has been gathered, we are far from understanding the orchestrated way of how they make metabolism. Nevertheless, based on the genetic information emerging on a daily basis, we are offered fantastic new tools that allow us new insights into the molecular basis of human metabolism under normal as well as pathophysiological conditions. Recent technological advancements have made it possible to analyse simultaneously large sets of mRNA and/or proteins expressed in a biological sample or to define genetic heterogeneity that may be important for the individual response of an organism to changes in its nutritional environment. Applications of the new techniques of genome and proteome analysis are central for the development of nutritional sciences in the next decade and its integration into the rapidly developing era of functional genomics.

Detection of bacteria associated with harmful algal blooms from coastal and microcosm environments using electronic microarrays

With the global expansion of harmful algal blooms (HABs), several measures, including molecular approaches, have been undertaken to monitor its occurrence. Many reports have indicated the significant roles of bacteria in controlling algal bloom dynamics. Attempts have been made to utilize the bacteria/harmful algae relationship in HAB monitoring. In this study, bacterial assemblages monitored during coastal HABs and bacterial communities in induced microcosm blooms were investigated. Samples were analysed using denaturing gradient gel electrophoresis (DGGE) of the 16S rRNA gene. DGGE bands with peculiar patterns before, during, and after algal blooms were isolated and identified. Probes for six ribotypes representing organisms associated with Chatonella spp., Heterocapsa circularisquama, or Heterosigma akashiwo were used for analysis on NanoChip electronic microarray. In addition, a new approach using cultured bacteria species was developed to detect longer (533 bp) polymerase chain reaction-amplified products on the electronic microarray. The use of fluorescently labelled primers allowed the detection of individual species in single or mixed DNA conditions. The developed approach enabled the detection of the presence or absence and relative abundance of the HAB-related ribotypes in coastal and microcosm blooms. This study indicates the ability of electronic microarray platform to detect or monitor bacteria in natural and induced environments.

Electrophoresis of DNA in human genetic diagnostics – state-of-the-art, alternatives and future prospects

Electrophoretic separation of nucleic acids according to their molecular weights has dominated the methods' spectrum in molecular genetics for nearly half a century. We review the current methodological basis and evaluate its impact with special reference to new developments in the microarray technology. Although electrophoresis may be made redundant for many applications in DNA diagnostics within a few years, a number of electrophoretic vestiges will remain irreplaceable in the foreseeable future.

Molecular Genetic Testing of Polymorphisms Associated With Venous Thrombosis

The growing knowledge of genetic polymorphisms predisposing to venous thrombosis has increased the demand for genetic testing of associated risk factors. This has prompted the need for simple, fast, reliable, and cost-effective genotyping methods for identification of those mutations. In the past decade, a large variety of DNA mutation analysis methods have been developed for detection of genetic variants associated with venous thrombosis, including PCR-based and PCR-independent technologies. Each of these technologies possesses unique advantages, but all have a common goal of simplifying and expediting mutation analysis. This review describes some of the commonly used technologies and commercially available platforms employed in clinical laboratories for genetic testing of thrombophilia. The choice of a technology for each individual laboratory would primarily depend on the specific requirements for the assay's accuracy, reliability, speed, throughput, and cost-effectiveness.

Low-volume amplification on chemically structured chips using the PowerPlex16 DNA amplification kit

In forensic DNA analysis, improvement of DNA typing technologies has always been an issue. It has been shown that DNA amplification in low volumes is a suitable way to enhance the sensitivity and efficiency of amplification. In this study, DNA amplification was performed on a flat, chemically structured glass slide in 1-microl reaction volumes from cell line DNA contents between 1,000 and 4 pg. On-chip DNA amplification reproducibly yielded full allelic profiles from as little as 32 pg of template DNA. Applicability on the simultaneous amplification of 15 short tandem repeats and of a segment of the Amelogenin gene, which are routinely used in forensic DNA analysis, is shown. The results are compared to conventional in-tube amplification carried out in 25-microl reaction volumes.

Electric-field assisted immobilization and hybridization of DNA oligomers on thin-film microchips

Single, square voltage pulses in the microsecond timescale result in selective 5'-end covalent bonding (immobilization) of thiolated single-stranded (ss) DNA probes to a modified silicon dioxide flat surface and in specific hybridization of ssDNA targets to the immobilized probe. Immobilization and hybridization rates using microsecond voltage pulses at or below 1 V are at least 10(8) times faster than in the passive control reactions performed without electric field (E), and can be achieved with at least three differently functionalized thin-film surfaces on plastic or glass substrates. The systematic study of the effect of DNA probe and target concentrations, of DNA probe and target length, and the application of asymmetric pulses on E-assisted DNA immobilization and hybridization showed that: (1) the rapidly rising edge of the pulse is most critical to the E-assisted processes, but the duration of the pulse is also important; (2) E-assisted immobilization and hybridization can be performed with micrometre-sized pixels, proving the potential for use on microelectronic length scales, and the applied voltage can be scaled down together with the electrode spacing to as low as 25 mV; and (3) longer DNA chains reduce the yield in the E-assisted immobilization and hybridization because the density of physisorbed single-stranded DNA is reduced. The results show that the E-induced reactions can be used as a general method in DNA microarrays to produce high-density DNA chips (E-immobilization) and speed the microarray-based analysis (E-hybridization).

Ribosomal RNA probes and microarrays: their potential use in assessing microbial biodiversity

The awareness that global biological diversity is affected by numerous, mostly human-made threats has made biodiversity assessment an important scientific issue for decades. Biodiversity includes different levels of complexity, such as community diversity, habitat diversity, genetic diversity, and species diversity. The application of molecular methods to answer ecological questions permits issues of biodiversity to be addressed at all levels. Microorganisms dominate global biological diversity in terms of their species numbers. However, their small size and limited morphological features make it challenging to obtain a comprehensive view of their biodiversity. The application of ribosomal RNA (rRNA) probes contributes significantly to the assessment of biodiversity at the molecular level. DNA microarrays offer a great potential to facilitate the application of molecular probes and other DNA analytical methods to answer ecological and biodiversity questions. We provide an introduction into the application of rRNA probes and DNA microarrays for the assessment of microbial biodiversity, as well as protocols for the implementation of DNA microarrays.

Electronic microarray analysis of 16S rDNA amplicons for bacterial detection

Electronic microarray technology is a potential alternative in bacterial detection and identification. However, conditions for bacterial detection by electronic microarray need optimization. Using the NanoChip electronic microarray, we investigated eight marine bacterial species. Based on the 16S rDNA sequences of these species, we constructed primers, reporter probes, and species-specific capture probes. We carried out two separate analyses for longer (533 bp) and shorter (350 and 200 bp) amplified products (amplicons). To detect simultaneously the hybridization signals for the 350- and 200-bp amplicons, we designed a common reporter probe from an overlapping sequence within both fragments. We developed methods to optimize detection of hybridization signals for processing the DNA chips. A matrix analysis was performed for different bacterial species and complementary capture probes on electronic microarrays. Results showed that, when using the longer amplicon, not all bacterial targets hybridized with the complementary capture probes, which was characterized by the presence of false-positive signals. However, with the shorter amplicons, all bacterial species were correctly and completely detected using the constructed complementary capture probes.

Molecular diagnostics by microelectronic microchips

Molecular diagnostics is being revolutionized by the development of highly advanced technologies for DNA and RNA testing. One of the most important challenges is the integration of microelectronics to microchip-based nucleic acid technologies. The specific characteristics of these microsystems make the miniaturization and automation of any step of a molecular diagnostic procedure possible. This review describes the application of microelectronics to all the processes involved in a genetic test, particularly to sample preparation, DNA amplification and sequence variation detection.

Determination of a novel haplotype of beta2-adrenergic receptor in the Japanese population by the combination of the electronic microchip assay using the NanoChip system with allele-specific PCR

The beta(2)-adrenergic receptor (B2AR) is a G protein-coupled cell surface receptor that is the key target for the beta(2)-agonist drugs used for bronchodelation in asthma and chromic obstructive pulmonary disease. To detect four SNPs with amino acid variations in the B2AR gene, we used the electronic microchip assay (NanoChip system), DHPLC and sequencing. Genomic DNA samples were obtained from the blood of 84 Japanese healthy volunteers. In sum, the agreement rates of the first data set with the final agreement data (allele calls) were 99.7% (328/329), 99.2% (243/245) and 96.7% (325/336). The percentages of no allele designation (ND) were 2.06% (7/336), 2.75% (7/252), and 0.00% (0/336) for the NanoChip system, DHPLC, and sequencing, respectively. As a result of SNP genotyping, we found three samples that might have a novel haplotype. Furthermore we identified the novel haplotype by a simple technique combining the NanoChip system and allele-specific PCR. These results indicated that NanoChip system was the useful method for clinical SNP genotyping and/or haplotyping because of its accuracy, simplicity and versatility.

A novel method of identifying genetic mutations using an electrochemical DNA array

We describe the development of a new type of DNA array chip that utilizes electrochemical reactions and a novel method of simultaneously identifying multiple genetic mutations on an array chip. The electrochemical array (ECA) uses a threading intercalator specific to double-stranded nucleotides, ferrocenylnaphthalene diimide (FND), as the indicator. ECA does not require target labeling, and the equipment is simple, durable and less expensive. The simultaneous multiple mutation detection (SMMD) system using an ECA chip and FND utilizes an enzyme to simultaneously distinguish several genetic mutations such as single nucleotide polymorphism (SNP), insertion, deletion, translocation and short tandem repeat. We examined this SMMD system using an ECA chip, by detecting seven different mutations on the lipoprotein lipase (LPL) gene for 50 patients in a blind test. It turned out that all the results obtained were concordant with the sequencing results, demonstrating that this system is a powerful tool for clinical applications.

Immobilization and hybridization by single sub-millisecond electric field pulses, for pixel-addressed DNA microarrays

Single square voltage pulses applied to buried electrodes result in dramatic rate increases for (1) selective covalent bonding (immobilization) of single-stranded DNA (ssDNA) probes to a functionalized thin film SiO(2) surface on a plastic substrate and (2) hybridization of ssDNA to the immobilized probe. DNA immobilization and hybridization times are 100 ns and 10 micros, respectively, about 10(9) times faster than the corresponding passive reactions without electric field. Surface coverage is comparable. Duration, magnitude and slew rate of the voltage pulse are all key factors controlling the rates of ssDNA immobilization and hybridization. With rise times of 4.5 ns, pulses shorter than 1 ms and voltages below 1V are effective. The ssDNA adsorbed on the surface is reoriented by the rapidly changing electric field. This reduces steric barriers and speeds the immobilization and hybridization reactions. These results open the way for pixel-addressed microarrays driven by silicon microelectronics circuits.

Development of multiplex DNA electronic microarrays using a universal adaptor system for detection of single nucleotide polymorphisms

The NanoChip® electronic microarray is designed for the rapid detection of genetic variation in research and clinical diagnosis. We have developed a multiplex electronic microarray assay, specific for single nucleotide polymorphism (SNP) genotyping and mutation detection, using universal adaptor sequences tailed to the 5′ end of PCR primers specific to each target. PCR products, amplified by primers directed to the universal adaptor sequence, are immobilized on the microarray either directly or via capture oligonucleotides complementary to the universal adaptor sequence. This simple modification results in a significant increase in fidelity with improved specificity and accuracy. In addition, the multiplexing of genetic variant detection allows increased throughput and significantly reduced cost per assay. This general schema can also be applied to other microarray and macroarray formats.

DNA hybridization and discrimination of single-nucleotide mismatches using chip-based microbead arrays

The development of a chip-based sensor array composed of individually addressable agarose microbeads has been demonstrated for the rapid detection of DNA oligonucleotides. Here, a "plug and play" approach allows for the simple incorporation of various biotinylated DNA capture probes into the bead-microreactors, which are derivatized in each case with avidin docking sites. The DNA capture probe containing microbeads are selectively arranged in micromachined cavities localized on silicon wafers. The microcavities possess trans-wafer openings, which allow for both fluid flow through the microreactors/analysis chambers and optical access to the chemically sensitive microbeads. Collectively, these features allow the identification and quantitation of target DNA analytes to occur in near real time using fluorescence changes that accompany binding of the target sample. The unique three-dimensional microenvironment within the agarose bead and the microfluidics capabilities of the chip structure afford a fully integrated package that fosters rapid analyses of solutions containing complex mixtures of DNA oligomers. These analyses can be completed at room temperature through the use of appropriate hybridization buffers. For applications requiring analysis of < or = 10(2) different DNA sequences, the hybridization times and point mutation selectivity factors exhibited by this bead array method exceed in many respects the operational characteristics of the commonly utilized planar DNA chip technologies. The power and utility of this microbead array DNA detection methodology is demonstrated here for the analysis of fluids containing a variety of similar 18-base oligonucleotides. Hybridization times on the order of minutes with point mutation selectivity factors greater than 10000 and limit of detection values of approximately 10(-13) M are obtained readily with this microbead array system.

Microarray and microfluidic methodology for genotyping cytokine gene polymorphisms

Cytokine genetic polymorphisms are the subject of disease-association studies that require large-scale human genotyping. Polymerase chain reaction based custom microarrays and microfluidics systems were used to develop genotyping assays for following cytokine polymorphisms: tumor necrosis factor-alpha G-308A, interleukin-4 (IL-4) C-589T, interferon-gamma (CA)n repeats, IL-1RN 86-bp variable number of tandem repeats (VNTR), and CCR5 32-bp indel. For G-308A, 70.9% of DNA samples assayed were homozygous for wild type, 25.5% were heterozygous, and none were homozygous for variant allele. For C-589T, 35.5% of DNA samples were homozygous for wild type, 38% were heterozygous, and 22% were homozygous for variant. For IL-1RN VNTR, 71% of DNA samples were homozygous and the remainder were heterozygous. For CCR5, 96.4% of amplicons were homozygous for wild type, and 3.6% were heterozygous containing deletion. For IFN-gamma (CA)n repeats, 35.6% had 2,2 alleles, 42.2% had 2,3 alleles, and 11% had 3,3 alleles with alleles 1 through 5 corresponding to 11 through 15 repeats, respectively. There was good concordance between the results we obtained and current "gold-standard" methodologies for analyzing single nucleotide polymorphisms and size polymorphisms. Electronic DNA concentration with high stringency predisposes microarray technology to hybridization fidelity and accuracy, and microfluidics systems outperform conventional methodologies for size polymorphisms. Comprehensive genotyping can be achieved for clinical epidemiologic studies on cytokine gene polymorphisms using this approach.

Rapid genotyping of common MeCP2 mutations with an electronic DNA microchip using serial differential hybridization

Rett syndrome is a neurodevelopmental disorder that affects females almost exclusively, and in which eight common point mutations on the X-linked MeCP2 gene are knows to cause over 70% of mutation-positive cases. We explored the use of a novel platform to detect the eight common mutations in Rett syndrome patients to expedite and simplify the process of identification of known genotypes. The Nanogen workstation consists of a two-color assay based on electric hybridization and thermal discrimination, all performed on an electronically active NanoChip. This genotyping platform was tested on 362 samples of a pre-determined genotype, which had been previously identified by a combination of DHPLC (denaturing high performance liquid chromatography) and direct sequencing. This genotyping technique proved to be rapid, facile, and displayed a specificity of 100% with 3% ambiguity. In addition, we present consecutive testing of seven mutations on a single pad of the NanoChip. This was accomplished by tagging down two amplimers together and serially hybridizing for seven different loci, allowing us to genotype samples for seven of the eight common Rett mutations on a single pad. This novel method displayed the same level of specificity and accuracy as the single amplimer reactions, and proved to be faster and more economical.

Molecular diagnostics by microelectronic microchips

Molecular diagnostics is being revolutionized by the completion of the human genome project and by the development of highly advanced technologies for DNA testing. One of the most important challenges is the introduction of high throughput systems such as DNA chips into diagnostic laboratories. DNA microchips are small devices permitting rapid analysis of genetic information, exploiting miniaturization of all components and automation of operational procedures. The most important biochip applications include gene expression and genetic variation identification and both may improve human molecular diagnostics. Here we review several approaches developed to allow rapid detection of many single nucleotide polymorphisms and mutations in large population samples. Among these, the use of microelectronics seems to best fit with the needs of molecular diagnostics.

Plastic biochannel hybridization devices: a new concept for microfluidic DNA arrays

Conventional DNA hybridization assay kinetics depends solely on the diffusion of target to surface-bound probes, causing long hybridization times. In this study, we examined the possibilities of accelerating the hybridization process by using microfluidic channels ("biochannels") made of polycarbonate, optionally with an integrated pump. We produced two different devices to study these effects: first, hybridization kinetics was investigated by using an eSensor electrochemical DNA detection platform allowing kinetic measurements in homogenous solution. We fabricated an integrated cartridge for the chip comprising the channel network and a micropump for the oscillation of the hybridization mixture to further overcome diffusion limitations. As a model assay, we used an assay for the detection of single-nucleotide polymorphisms in the HFE-H gene. Second, based on the biochannel approach, we constructed a plastic microfluidic chip with a network of channels for optical detection of fluorescent-labeled targets. An assay for the simultaneous detection of four pathogenic bacteria surrogate strains from multiple samples was developed for this device. We observed high initial hybridization velocities and a fast attainment of equilibrium for the biochannel with integrated pump. Experimental results were compared with predictions generated by computer simulations.

Active microelectronic array system for DNA hybridization, genotyping and pharmacogenomic applications

Microelectronic arrays have been developed for DNA hybridization analysis of point mutations, single nucleotide polymorphisms, short tandem repeats and gene expression. In addition to a variety of molecular biology and genomic research applications, such devices will also be used for infectious disease detection, genetic and cancer diagnostics, and pharmacogenomic applications. These microelectronic array devices are able to produce defined electric fields on their surfaces that allow charged molecules and other entities to be transported to or from any test site or micro-location on the planar surface of the device. These molecules and entities include DNA, RNA, proteins, enzymes, antibodies and cells. Electronic-based molecule addressing and hybridization can then be carried out, where the electric field is now used to greatly accelerate the hybridization reactions that occur on the selected test sites. When reversed, the electric field can be used to provide an additional parameter for improved hybridization. Special low-conductance buffers have been developed that provide for the rapid transport of the DNA molecules and facilitate the electronic hybridization reactions under conditions that do not support hybridization. Important to the device function is the permeation layer that overcoats the underlying microelectrodes. Generally composed of a porous hydrogel material impregnated with attachment chemistry, this permeation layer prevents the destruction of analytes at the active microelectrode surface, ameliorates the adverse effects of electrolysis products on the sensitive hybridization and affinity reactions, and serves as a support structure for attaching DNA probes and other molecules to the array. The microelectronic chip or array device is incorporated into a cartridge package (NanoChip trade mark cartridge) that provides the electronic, optical, and fluidic interfacing. A complete instrument system (NanoChip trade mark Molecular Biology Workstation) provides a chip loader, fluorescent reader, computer control interface and data display screen. The probe loader component allows DNA probes or target molecules (polymerase chain reactions amplicons, genomic DNA, RNA, etc.) to be selectively addressed to the array test sites, providing the end-user with 'make your own chip' capabilities. The electronic hybridization can then be carried out and the chip analyzed using a fluorescent detector system. In addition to carrying out rapid, accurate and highly reliable genotyping (point mutations, single nucleotide polymorphisms, short tandem repeats), other future applications include gene expression analysis, or on-chip amplification, immunoassays and cell separation and selection. Smaller and more compact systems are also being designed for portable sample to answer and point of care diagnostics.

Sequencing by hybridization (SBH): advantages, achievements, and opportunities

Efficient DNA sequencing of the genomes of individual species and organisms is a critical task for the advancement of biological sciences, medicine and agriculture. Advances in modern sequencing methods are needed to meet the challenge of sequencing such megabase to gigabase quantities of DNA. Two possible strategies for DNA sequencing exist: direct methods, in which each base position in the DNA chain is determined individually (e.g., gel sequencing or pyrosequencing), and indirect methods, in which the DNA sequence is assembled based on experimental determination of oligonucleotide content of the DNA chain. One promising indirect method is sequencing by hybridization (SBH), in which sets of oligonucleotides are hybridized under conditions that allow detection of complementary sequences in the target nucleic acid. The unprecedented sequence search parallelism of the SBH method has allowed development of high-throughput, low-cost, miniaturized sequencing processes on arrays of DNA samples or probes. Newly developed SBH methods use DNA ligation to combine relatively small sets of short probes to score potentially tens of millions of longer oligonucleotide sequences in a target DNA. Such combinatorial approaches allow analysis of DNA samples of up to several kilobases (several times longer than allowed by current direct methods) for a variety of DNA sequence analysis applications, including de novo sequencing, resequencing, mutation/SNP discovery and genotyping, and expression monitoring. Future advances in biochemistry and implementation of detection methods that allow single-molecule sensitivity may provide the necessary miniaturization, specificity, and multiplexing efficiency to allow routine whole genome analysis in a single solution-based hybridization experiment.

DNA microarray technology: devices, systems, and applications

In this review, recent advances in DNA microarray technology and their applications are examined. The many varieties of DNA microarray or DNA chip devices and systems are described along with their methods for fabrication and their use. This includes both high-density microarrays for high-throughput screening applications and lower-density microarrays for various diagnostic applications. The methods for microarray fabrication that are reviewed include various inkjet and microjet deposition or spotting technologies and processes, in situ or on-chip photolithographic oligonucleotide synthesis processes, and electronic DNA probe addressing processes. The DNA microarray hybridization applications reviewed include the important areas of gene expression analysis and genotyping for point mutations, single nucleotide polymorphisms (SNPs), and short tandem repeats (STRs). In addition to the many molecular biological and genomic research uses, this review covers applications of microarray devices and systems for pharmacogenomic research and drug discovery, infectious and genetic disease and cancer diagnostics, and forensic and genetic identification purposes. Additionally, microarray technology being developed and applied to new areas of proteomic and cellular analysis are reviewed.

A dynamic approach to mapping coordinates between microplates and microarrays

The retrieval of useful data from spotted microarray slides requires keeping track of which microplate wells and DNA sample corresponds to each spot on each array slide. Existing approaches are closely coupled with the type of arrayer in use and are computer operating-system-specific. To support the microarray researcher community at large who use different arrayers and computer platforms, increased flexibility, generality, and portability of these approaches are required. In this paper, we describe a general algorithm that correlates the well positions of DNA samples in each microplate to the positions of the spots on each array slide. Based on this algorithm, we have implemented a flexible and platform-independent program named MicroArray Convolutor (MAC) that provides a Web solution allowing the user to: (a) import a text file that identifies the DNA samples and their well locations, (b) select a transformation method that converts data in 96-well plate format into 384-well plate format, and (c) specify the output format of the array lists dependant on the configuration of the array platform as well as the downstream analysis software chosen for the array. MAC and its source code can be accessed via the following Web address: http://ymd.med.yale.edu/kei-cgi/kc_mac_dev8.pl.

Single nucleotide polymorphism seeking long term association with complex disease

Successful investigation of common diseases requires advances in our understanding of the organization of the genome. Linkage disequilibrium provides a theoretical basis for performing candidate gene or whole-genome association studies to analyze complex disease. However, to constructively interrogate SNPs for these studies, technologies with sufficient throughput and sensitivity are required. A plethora of suitable and reliable methods have been developed, each of which has its own unique advantage. The characteristics of the most promising genotyping and polymorphism scanning technologies are presented. These technologies are examined both in the context of complex disease investigation and in their capacity to face the unique physical and molecular challenges (allele amplification, loss of heterozygosity and stromal contamination) of solid tumor research.

An integrated, stacked microlaboratory for biological agent detection with DNA and immunoassays

An integrated, stacked microlaboratory for performing automated electric-field-driven immunoassays and DNA hybridization assays was developed. The stacked microlaboratory was fabricated by orderly laminating several different functional layers (all 76 x 76 mm(2)) including a patterned polyimide layer with a flip-chip bonded CMOS chip, a pressure sensitive acrylic adhesive (PSA) layer with a fluidic cutout, an optically transparent polymethyl methacrylate (PMMA) film, a PSA layer with a via, a patterned polyimide layer with a flip-chip bonded silicon chip, a PSA layer with a fluidic cutout, and a glass cover plate layer. Versatility of the stacked microlaboratory was demonstrated by various automated assays. Escherichia coli bacteria and Alexa-labeled protein toxin staphylococcal enterotoxin B (SEB) were detected by electric-field-driven immunoassays on a single chip with a specific-to-nonspecific signal ratios of 4.2:1 and 3.0:1, respectively. Furthermore, by integrating the microlaboratory with a module for strand displacement amplification (SDA), the identification of the Shiga-like toxin gene (SLT1) from E. coli was accomplished within 2.5 h starting from a dielectrophoretic concentration of intact E. coli bacteria and finishing with an electric-field-driven DNA hybridization assay, detected by fluorescently labeled DNA reporter probes. The integrated microlaboratory can be potentially used in a wide range of applications including detection of bacteria and biowarfare agents, and genetic identification.

Microelectronic array devices and techniques for electric field enhanced DNA hybridization in low-conductance buffers

A variety of electronic DNA array devices and techniques have been developed that allow electric field enhanced hybridization to be carried out under special low-conductance conditions. These devices include both planar microelectronic DNA array/chip devices as well as electronic microtiter plate-like devices. Such "active" electronic devices are able to provide controlled electric (electrophoretic) fields that serve as a driving force to move and concentrate nucleic acid molecules (DNA/RNA) to selected microlocation test-sites on the device. In addition to ionic strength, pH, temperature and other agents, the electric field provides another controllable parameter that can affect and enhance DNA hybridization. With regard to the planar microelectronic array devices, special low-conductance buffers were developed in order to maintain rapid transport of DNA molecules and to facilitate hybridization within the constrained low current and voltage ranges for this type of device. With regard to electronic microtiter plate type devices (which do not have the low current/voltage constraints), the use of mixed buffers (low conductance upper chamber/high conductance lower chamber) can be used in a unique fashion to create favorable hybridization conditions in a microzone within the test site location. Both types of devices allow DNA molecules to be rapidly and selectively hybridized at the array test sites under conditions where the DNA in the bulk solution can remain substantially denatured.

Inflammatory gene polymorphisms and ischaemic heart disease: review of population association studies

Inflammation and genetics are both prominent mechanisms in the pathogenesis of atherosclerosis and arterial thrombosis. Accordingly, a number of population studies have explored the association of ischaemic heart disease with gene polymorphisms of the inflammatory molecules tumour necrosis factors (TNF) alpha and beta, transforming growth factors (TGF) beta1 and 2, interleukin (IL) 1 and its receptor antagonist (IL 1ra), CD14 (the receptor for lipopolysaccharide), P and E selectins, and platelet endothelial cell adhesion molecule (PECAM) 1. Although they are very preliminary and partly conflicting, the data provide some evidence that alterations in the genetics of the inflammatory system may modify the risk of ischaemic heart disease.

Genotyping of simple and compound short tandem repeat loci using electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry

The utility of electrospray ionization Fourier transform ion cyclotron resonance (ESI-FIICR) mass spectrometry as a new approach for genotyping short tandem repeats (STRs) is demonstrated. STRs are currently valued as a powerful source of genetic information with repeats that range in structure from simple to hypervariable. Two tetranucleotide STR loci were chosen to evaluate ESI-FTICR mass spectrometry as a tool for genotyping: HUM-TH01, a simple STR with nonconsensus alleles, and vWA, a compound STR with nonconsensus alleles. For HUM-TH01, the genotype (i.e., repeat number of each allele) was determined for each of 30 individuals using mass measurements of double-stranded amplicons. Low-intensity peaks observed in the spectra of amplicons derived from heterozygous individuals were identified by mass as heteroduplexes that had formed between nonhomologous strands. Mass measurement of the double-stranded vWA amplicon was not sufficient for determining whether the individual was homozygous for allele subtype 18 or 18' since the amplicons differ by only 0.99 Da. Therefore, single-stranded amplicons were generated by incorporating a phosphorylated primer, prepared using T4 polynucleotide kinase, into the PCR phase and subsequently digesting the bottom strand using lambda-exonuclease. Accurate mass measurements were obtained for the single-stranded amplicons using internal calibration and the addition of a correction factor to adjust for the natural variation of isotopic abundances, confirming that the individual is homozygous for allele 18. Our results clearly demonstrate that ESI-FTICR mass spectrometry is a powerful approach to characterize both simple and compound STRs beyond the capabilities of electrophoretic technologies.