Engineering of synthetic, stress-responsive yeast promoters

Transcriptome analysis of Kluyveromyces marxianus under succinic acid stress and development of robust strains

Kluyveromyces marxianus has become an attractive non-conventional yeast cell factory due to its advantageous properties such as high thermal tolerance and rapid growth. Succinic acid (SA) is an important platform molecule that has been applied in various industries such as food, material, cosmetics, and pharmaceuticals. SA bioproduction may be compromised by its toxicity. Besides, metabolite-responsive promoters are known to be important for dynamic control of gene transcription. Therefore, studies on global gene transcription under various SA concentrations are of great importance. Here, comparative transcriptome changes of K. marxianus exposed to various concentrations of SA were analyzed. Enrichment and analysis of gene clusters revealed repression of the tricarboxylic acid cycle and glyoxylate cycle, also activation of the glycolysis pathway and genes related to ergosterol synthesis. Based on the analyses, potential SA-responsive promoters were investigated, among which the promoter strength of IMTCP2 and KLMA_50231 increased 43.4% and 154.7% in response to 15 g/L SA. In addition, overexpression of the transcription factors Gcr1, Upc2, and Ndt80 significantly increased growth under SA stress. Our results benefit understanding SA toxicity mechanisms and the development of robust yeast for organic acid production. KEY POINTS: • Global gene transcription of K. marxianus is changed by succinic acid (SA) • Promoter activities of IMTCP2 and KLMA_50123 are regulated by SA • Overexpression of Gcr1, Upc2, and Ndt80 enhanced SA tolerance.

A transcriptomic atlas of acute stress response to low pH in multiple Issatchenkia orientalis strains

IMPORTANCE

Issatchenkia orientalis is a promising industrial chassis to produce biofuels and bioproducts due to its high tolerance to multiple environmental stresses such as low pH, heat, and other chemicals otherwise toxic for the most widely used microbes. Yet, little is known about specific mechanisms of such tolerance in this organism, hindering our ability to engineer this species to produce valuable biochemicals. Here, we report a comprehensive study of the mechanisms of acidic tolerance in this species via transcriptome profiling across variable pH for 12 different strains with different phenotypes. We found multiple regulatory mechanisms involved in tolerance to low pH in different strains of I. orientalis, marking potential targets for future gene editing and perturbation experiments.

Deep Learning-Assisted Design of Novel Promoters in Escherichia coli

Deep learning (DL) approaches have the ability to accurately recognize promoter regions and predict their strength. Here, the potential for controllably designing active Escherichia coli promoter is explored by combining multiple deep learning models. First, "DRSAdesign," which relies on a diffusion model to generate different types of novel promoters is created, followed by predicting whether they are real or fake and strength. Experimental validation showed that 45 out of 50 generated promoters are active with high diversity, but most promoters have relatively low activity. Next, "Ndesign," which relies on generating random sequences carrying functional -35 and -10 motifs of the sigma70 promoter is introduced, and their strength is predicted using the designed DL model. The DL model is trained and validated using 200 and 50 generated promoters, and displays Pearson correlation coefficients of 0.49 and 0.43, respectively. Taking advantage of the DL models developed in this work, possible 6-mers are predicted as key functional motifs of the sigma70 promoter, suggesting that promoter recognition and strength prediction mainly rely on the accommodation of functional motifs. This work provides DL tools to design promoters and assess their functions, paving the way for DL-assisted metabolic engineering.

Systematic sequence engineering enhances the induction strength of the glucose-regulated GTH1 promoter of Komagataella phaffii

The promoter of the high-affinity glucose transporter Gth1 (PGTH1) is tightly repressed on glucose and glycerol surplus, and strongly induced in glucose-limitation, thus enabling regulated methanol-free production processes in the yeast production host Komagataella phaffii. To further improve this promoter, an intertwined approach of nucleotide diversification through random and rational engineering was pursued. Random mutagenesis and fluorescence activated cell sorting of PGTH1 yielded five variants with enhanced induction strength. Reverse engineering of individual point mutations found in the improved variants identified two single point mutations with synergistic action. Sequential deletions revealed the key promoter segments for induction and repression properties, respectively. Combination of the single point mutations and the amplification of key promoter segments led to a library of novel promoter variants with up to 3-fold higher activity. Unexpectedly, the effect of gaining or losing a certain transcription factor binding site (TFBS) was highly dependent on its context within the promoter. Finally, the applicability of the novel promoter variants for biotechnological production was proven for the secretion of different recombinant model proteins in fed batch cultivation, where they clearly outperformed their ancestors. In addition to advancing the toolbox for recombinant protein production and metabolic engineering of K. phaffii, we discovered single nucleotide positions and correspondingly affected TFBS that distinguish between glycerol- and glucose-mediated repression of the native promoter.

Engineering yeast cell factories to produce biodegradable plastics and their monomers: Current status and prospects

Traditional plastic products have caused serious environmental pollution due to difficulty to be degraded in the natural environment. In the recent years, biodegradable plastics are receiving increasing attention due to advantages in natural degradability and environmental friendliness. Biodegradable plastics have potential to be used in food, agriculture, industry, medicine and other fields. However, the high production cost of such plastics is the bottleneck that limits their commercialization and application. Yeasts, including budding yeast and non-conventional yeasts, are widely studied to produce biodegradable plastics and their organic acid monomers. Compared to bacteria, yeast strains are more tolerable to multiple stress conditions including low pH and high temperature, and also have other advantages such as generally regarded as safe, and no phage infection. In addition, synthetic biology and metabolic engineering of yeast have enabled its rapid and efficient engineering for bioproduction using various renewable feedstocks, especially lignocellulosic biomass. This review focuses on the recent progress in biosynthesis technology and strategies of monomeric organic acids for biodegradable polymers, including polylactic acid (PLA), polyhydroxyalkanoate (PHA), polybutylene succinate (PBS), and polybutylene adipate terephthalate (PBAT) using yeast cell factories. Improving the performance of yeast as a cell factory and strategies to improve yeast acid stress tolerance are also discussed. In addition, the critical challenges and future prospects for the production of biodegradable plastic monomer using yeast are also discussed.

Dynamic Metabolic Control: From the Perspective of Regulation Logic

Establishing microbial cell factories has become a sustainable and increasingly promising approach for the synthesis of valuable chemicals. However, introducing heterologous pathways into these cell factories can disrupt the endogenous cellular metabolism, leading to suboptimal production performance. To address this challenge, dynamic pathway regulation has been developed and proven effective in improving microbial biosynthesis. In this review, we summarized typical dynamic regulation strategies based on their control logic. The applicable scenarios for each control logic were highlighted and perspectives for future research direction in this area were discussed.

Hosts engineering and in vitro enzymatic synthesis for the discovery of novel natural products and their derivatives

Novel natural products (NPs) and their derivatives are important sources for drug discovery, which have been broadly applied in the fields of agriculture, livestock, and medicine, making the synthesis of NPs and their derivatives necessarily important. In recent years, biosynthesis technology has received increasing attention due to its high efficiency in the synthesis of high value-added novel products and its advantages of green, environmental protection, and controllability. In this review, the technological advances of biosynthesis strategies in the discovery of novel NPs and their derivatives are outlined, with an emphasis on two areas of host engineering and in vitro enzymatic synthesis. In terms of hosts engineering, multiple microorganisms, including Streptomyces, Aspergillus, and Penicillium, have been used as the biosynthetic gene clusters (BGCs) provider and host strain for the expression of BGCs to discover new compounds over the past years. In addition, the use of in vitro enzymatic synthesis strategy to generate novel compounds such as triterpenoid saponins and flavonoids is also hereby described.

Promoters and introns as key drivers for enhanced gene expression in Saccharomyces cerevisiae

The transcription of genes in the yeast Saccharomyces cerevisiae is governed by multiple layers of regulatory elements and proteins, cooperating to ensure optimum expression of the final protein product based on the cellular requirements. Promoters have always been regarded as the most important determinant of gene transcription, but introns also play a key role in the expression of intron-encoding genes. Some introns can enhance transcription when introduced either promoter-proximal or embedded in the open reading frame of genes. However, the outcome is seldom predictable, with some introns increasing or decreasing transcription depending on the promoter and reporter gene employed. This chapter provides an overview of the general structure and function of promoters and introns and how they may cooperate during transcription to allow intron-mediated enhancement of gene expression. Since S. cerevisiae is a suitable host for recombinant protein production on a commercial level, stronger and more controllable promoters are in high demand. Enhanced gene expression can be achieved via promoter engineering, which may include introns that increase the efficacy of recombinant expression cassettes. Different models for the role of introns in transcription are briefly discussed to show how these intervening sequences can actively interact with the transcription machinery. Furthermore, recent examples of improved protein production via the introduction of promoter-proximal introns are highlighted to showcase the potential value of intron-mediated enhancement of gene expression.

Reprogramming cellular metabolism to increase the efficiency of microbial cell factories

Recent studies are increasingly focusing on advanced biotechnological tools, self-adjusting smart microorganisms, and artificial intelligent networks, to engineer microorganisms with various functions. Microbial cell factories are a vital platform for improving the bioproduction of medicines, biofuels, and biomaterials from renewable carbon sources. However, these processes are significantly affected by cellular metabolism, and boosting the efficiency of microbial cell factories remains a challenge. In this review, we present a strategy for reprogramming cellular metabolism to enhance the efficiency of microbial cell factories for chemical biosynthesis, which improves our understanding of microbial physiology and metabolic control. Current methods are mainly focused on synthetic pathways, metabolic resources, and cell performance. This review highlights the potential biotechnological strategy to reprogram cellular metabolism and provide novel guidance for designing more intelligent industrial microbes with broader applications in this growing field.

Overexpression of genes by stress-responsive promoters increases protein secretion in Saccharomyces cerevisiae

Recombinant proteins produced by cell factories are now widely used in various fields. Many efforts have been made to improve the secretion capacity of cell factories to meet the increasing demand for recombinant proteins. Recombinant protein production usually causes cell stress in the endoplasmic reticulum (ER). The overexpression of key genes possibly removes limitations in protein secretion. However, inappropriate gene expression may have negative effects. There is a need for dynamic control of genes adapted to cellular status. In this study, we constructed and characterized synthetic promoters that were inducible under ER stress conditions in Saccharomyces cerevisiae. The unfolded protein response element UPRE2, responding to stress with a wide dynamic range, was assembled with various promoter core regions, resulting in UPR-responsive promoters. Synthetic responsive promoters regulated gene expression by responding to stress level, which reflected the cellular status. The engineered strain using synthetic responsive promoters P_{4UPRE2 - TDH3} and P_{4UPRE2 - TEF1} for co-expression of ERO1 and SLY1 had 95% higher α-amylase production compared with the strain using the native promoters P_TDH3 and P_TEF1. This work showed that UPR-responsive promoters were useful in the metabolic engineering of yeast strains for tuning genes to support efficient protein production.

Improving Saccharomyces cerevisiae acid and oxidative stress resistance using a prokaryotic gene identified by functional metagenomics

Innovations in obtaining products from lignocellulosic biomass have been largely based on the improvement of microorganisms and enzymes capable of degrading these materials. To complete the whole process, microorganisms must be able to ferment the resulting sugars and tolerate high concentrations of product, osmotic pressure, ion toxicity, temperature, toxic compounds from lignocellulose pretreatment, low pH, and oxidative stress. In this work, we engineered laboratory and industrial Saccharomyces cerevisiae strains by combining a gene (hu) recovered from a metagenomic approach with different native and synthetic promoters to obtain improved acid and oxidative stress resistance. Laboratorial strains harboring hu gene under the control of the synthetic stress responsive PCCW14v5 showed increased survival rates after 2 h exposure to pH 1.5. The hu gene was also able to significantly enhance the tolerance of the industrial strain to high concentrations of H₂O₂ when combined with PTEF1, PYGP1 or PYGP1v7 after 3 h exposure.

Natural promoters and promoter engineering strategies for metabolic regulation in Saccharomyces cerevisiae

Sharomyces cerevisiae is currently one of the most important foreign gene expression systems. S. cerevisiae is an excellent host for high-value metabolite cell factories due to its advantages of simplicity, safety, and nontoxicity. A promoter, as one of the basic elements of gene transcription, plays an important role in regulating gene expression and optimizing metabolic pathways. Promoters control the direction and intensity of transcription, and the application of promoters with different intensities and performances will largely determine the effect of gene expression and ultimately affect the experimental results. Due to its significant role, there have been many studies on promoters for decades. While some studies have explored and analyzed new promoters with different functions, more studies have focused on artificially modifying promoters to meet their own scientific needs. Thus, this article reviews current research on promoter engineering techniques and related natural promoters in S. cerevisiae. First, we introduce the basic structure of promoters and the classification of natural promoters. Then, the classification of various promoter strategies is reviewed. Finally, by grouping related articles together using various strategies, this review anticipates the future development direction of promoter engineering.

A well-characterized polycistronic-like gene expression system in yeast

Efficient expression of multiple genes is critical to yeast metabolic engineering for the bioproduction of bulk and fine chemicals. A yeast polycistronic expression system is of particular interest because one promoter can drive the expression of multiple genes. 2A viral peptides enable the cotranslation of multiple proteins from a single mRNA by ribosomal skipping. However, the wide adaptation of 2A viral peptides for polycistronic-like gene expression in yeast awaits in-depth characterizations. Additionally, a one-step assembly of such a polycistronic-like system is highly desirable. To this end, we have developed a modular cloning (MoClo) compatible 2A peptide-based polycistronic-like system capable of expressing multiple genes from a single promoter in yeast. Characterizing the bi-, tri-, and quad-cistronic expression of fluorescent proteins showed high cleavage efficiencies of three 2A peptides: E2A from equine rhinitis B virus, P2A from porcine teschovirus-1, and O2A from Operophtera brumata cypovirus-18. Applying the polycistronic-like system to produce geraniol, a valuable industrial compound, resulted in comparable or higher titers than using conventional monocistronic constructs. In summary, this highly-characterized polycistronic-like gene expression system is another tool to facilitate multigene expression for metabolic engineering in yeast.

Enhanced extracellular raw starch-degrading α-amylase production in Bacillus subtilis by promoter engineering and translation initiation efficiency optimization

Background

A raw starch-degrading α-amylase from Pontibacillus sp. ZY (AmyZ1), previously screened by our laboratory, showed a promising application potential for starch-processing industries. However, the AmyZ1 secretory production still under investigation, which seriously restricts its application in the starch-processing industry. On the other hand, Bacillus subtilis is widely used to achieve the extracellular expression of target proteins.

Results

AmyZ1 secretory production was achieved in B. subtilis and was enhanced by promoter engineering and translation initiation efficiency optimization. First, based on the different phase-dependent promoters, the dual-promoter P_spoVG–P_spoVG142 was constructed by combining dual-promoter engineering and promoter modification. The corresponding strain BZd34 showed an extracellular AmyZ1 activity of 1437.6 U/mL during shake flask cultivation, which was 3.11-fold higher than that of the original strain BZ1 (P_groE). Then, based on translation initiation efficiency optimization, the best strain BZd343 containing optimized 5'-proximal coding sequence (opt3) produced the highest extracellular α-amylase activity of 1691.1 U/mL, which was 3.65-fold higher than that of the strain BZ1. Finally, cultivation of BZd343 in 3-L fermenter exhibited an extracellular AmyZ1 activity of 14,012 U/mL at 48 h, with productivity of 291.9 U/mL·h.

Conclusions

This is the first report of recombinant expression of AmyZ1 in B. subtilis and the expression level of AmyZ1 represents the highest raw starch-degrading α-amylase level in B. subtilis to date. The high-level expression of AmyZ1 in this work provides a foundation for its industrial production. The strategies used in this study also provide a strategic reference for improving the secretory expression of other enzymes in B. subtilis.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01855-9.

Intracellular biosensor-based dynamic regulation to manipulate gene expression at the spatiotemporal level

The use of intracellular, biosensor-based dynamic regulation strategies to regulate and improve the production of useful compounds have progressed significantly over previous decades. By employing such an approach, it is possible to simultaneously realize high productivity and optimum growth states. However, industrial fermentation conditions contain a mixture of high- and low-performance non-genetic variants, as well as young and aged cells at all growth phases. Such significant individual variations would hinder the precise controlling of metabolic flux at the single-cell level to achieve high productivity at the macroscopic population level. Intracellular biosensors, as the regulatory centers of metabolic networks, can real-time sense intra- and extracellular conditions and, thus, could be synthetically adapted to balance the biomass formation and overproduction of compounds by individual cells. Herein, we highlight advances in the designing and engineering approaches to intracellular biosensors. Then, the spatiotemporal properties of biosensors associated with the distribution of inducers are compared. Also discussed is the use of such biosensors to dynamically control the cellular metabolic flux. Such biosensors could achieve single-cell regulation or collective regulation goals, depending on whether or not the inducer distribution is only intracellular.

Enhancing biofuels production by engineering the actin cytoskeleton in Saccharomyces cerevisiae

Saccharomyces cerevisiae is widely employed as a cell factory for the production of biofuels. However, product toxicity has hindered improvements in biofuel production. Here, we engineer the actin cytoskeleton in S. cerevisiae to increase both the cell growth and production of n-butanol and medium-chain fatty acids. Actin cable tortuosity is regulated using an n-butanol responsive promoter-based autonomous bidirectional signal conditioner in S. cerevisiae. The budding index is increased by 14.0%, resulting in the highest n-butanol titer of 1674.3 mg L⁻¹. Moreover, actin patch density is fine-tuned using a medium-chain fatty acid responsive promoter-based autonomous bidirectional signal conditioner. The intracellular pH is stabilized at 6.4, yielding the highest medium-chain fatty acids titer of 692.3 mg L⁻¹ in yeast extract peptone dextrose medium. Engineering the actin cytoskeleton in S. cerevisiae can efficiently alleviate biofuels toxicity and enhance biofuels production.

Product toxicity is one of the factors that hinder biofuel production. Here, the authors engineer the actin cytoskeleton to increase cell growth and production of n-butanol and medium-chain fatty acids in Saccharomyces cerevisiae.

Exploitation of Strong Constitutive and Stress-driven Promoters from Acetobacter pasteurianus for Improving Acetic acid Tolerance

Acetobacter pasteurianus is an excellent cell factory for production of highly-strength acetic acid, and attracts an increasing attention in metabolic engineering. However, the available well-characterized constitutive and inducible promoters are rather limited to adjust metabolic fluxes in A. pasteurianus. In this study, we screened a panel of constitutive and acid stress-driven promoters based on time-series of RNA-seq data and characterized in A. pasteurianus and Escherichia coli. Nine constitutive promoters ranged in strength from 1.7-fold to 100-fold that of the well-known strong promoter P_adh under non-acetic acid environment. Subsequently, an acetic acid-stable red fluorescent visual reporting system was established and applied to evaluate acid stress-driven promoter in A. pasteurianus during highly-acidic fermentation environment. P_groES was identified as acid stress-driven strong promoters, with expression outputs varied from 100% to 200% when acetic acid treatment. To assess their application potential, ultra-strong constitutive promoter P_tuf and acid stress-driven strong promoter P_groES were selected to overexpress acetyl-CoA synthase and greatly improved acetic acid tolerance. Notably, the acid stress-driven promoter displayed more favorable for regulating strain robustness against acid stress by overexpressing tolerance gene. In summary, this is the first well-characterized constitutive and acid stress-driven promoter library from A. pasteurianus, which could be used as a promising toolbox for metabolic engineering in acetic acid bacteria and other gram-negative bacteria.

An operator-based expression toolkit for Bacillus subtilis enables fine-tuning of gene expression and biosynthetic pathway regulation

A gene regulatory system is an important tool for the engineering of biosynthetic pathways of organisms. Here, we report the development of an inducible-ON/OFF regulatory system using a malO operator as a key element. We identified and modulated sequence, position, numbers, and spacing distance of malO operators, generating a series of activating or repressive promoters with tunable strength. The stringency and robustness are both guaranteed in this system, a maximal induction factor of 790-fold was achieved, and nine proteins from different organisms were expressed with high yields. This system can be utilized as a gene switch, promoter enhancer, or metabolic valve in synthetic biology applications. This operator-based engineering strategy can be employed for developing similar regulatory systems in different microorganisms.

Genetic elements are key components of metabolic engineering and synthetic biological applications, allowing the development of organisms as biosensors and for manufacturing valuable chemicals and protein products. In contrast to the gram-negative model bacterium Escherichia coli, the gram-positive model bacterium Bacillus subtilis lacks such elements with precise and flexible characteristics, which is a great barrier to employing B. subtilis for laboratory studies and industrial applications. Here, we report the development of a malO-based genetic toolbox that is derived from the operator box in the malA promoter, enabling gene regulation via compatible “ON” and “OFF” switches. This engineered toolbox combines promoter-based mutagenesis and host-specific metabolic engineering of transactivation components upon maltose induction to achieve stringent, robust, and homogeneous gene regulation in B. subtilis. We further demonstrate the synthetic biological applications of the toolbox by utilizing these genetic elements as a gene switch, a promoter enhancer, and an ON-OFF dual-control device in biosynthetic pathway optimization. Collectively, this regulatory system provides a comprehensive genetic toolbox for controlling the expression of genes in biosynthetic pathways and regulatory networks to optimize the production of valuable chemicals and proteins in B. subtilis.

Advancing Yarrowia lipolytica as a superior biomanufacturing platform by tuning gene expression using promoter engineering

Yarrowia lipolytica is recognized as an excellent non-conventional yeast in the field of biomanufacturing, where it is used as a host to produce oleochemicals, terpenes, organic acids, polyols and recombinant proteins. Consequently, metabolic engineering of this yeast is becoming increasingly popular to advance it as a superior biomanufacturing platform, of which promoters are the most basic elements for tuning gene expression. Endogenous promoters of Yarrowia lipolytica were reviewed, which are the basis for promoter engineering. The engineering strategies, such as hybrid promoter engineering, intron enhancement promoter engineering, and transcription factor-based inducible promoter engineering are described. Additionally, the applications of Yarrowia lipolytica promoter engineering to rationally reconstruct biosynthetic gene clusters and improve the genome-editing efficiency of the CRISPR-Cas systems were reviewed. Finally, research needs and future directions for promoter engineering are also discussed in this review.

Characterizing and engineering promoters for metabolic engineering of Ogataea polymorpha

Bio-manufacturing via microbial cell factory requires large promoter library for fine-tuned metabolic engineering. Ogataea polymorpha, one of the methylotrophic yeasts, possesses advantages in broad substrate spectrum, thermal-tolerance, and capacity to achieve high-density fermentation. However, a limited number of available promoters hinders the engineering of O. polymorpha for bio-productions. Here, we systematically characterized native promoters in O. polymorpha by both GFP fluorescence and fatty alcohol biosynthesis. Ten constitutive promoters (P_PDH, P_PYK, P_FBA, P_PGM, P_GLK, P_TRI, P_GPI, P_ADH1, P_TEF1 and P_GCW14) were obtained with the activity range of 13%–130% of the common promoter P_GAP (the promoter of glyceraldehyde-3-phosphate dehydrogenase), among which P_PDH and P_GCW14 were further verified by biosynthesis of fatty alcohol. Furthermore, the inducible promoters, including ethanol-induced P_ICL1, rhamnose-induced P_LRA3 and P_LRA4, and a bidirectional promoter (P_Mal-P_Per) that is strongly induced by sucrose, further expanded the promoter toolbox in O. polymorpha. Finally, a series of hybrid promoters were constructed via engineering upstream activation sequence (UAS), which increased the activity of native promoter P_LRA3 by 4.7–10.4 times without obvious leakage expression. Therefore, this study provided a group of constitutive, inducible, and hybrid promoters for metabolic engineering of O. polymorpha, and also a feasible strategy for rationally regulating the promoter strength.

Saccharomyces cerevisiae as a Heterologous Host for Natural Products

Cell factories can provide a sustainable supply of natural products with applications as pharmaceuticals, food-additives or biofuels. Besides being an important model organism for eukaryotic systems, Saccharomyces cerevisiae is used as a chassis for the heterologous production of natural products. Its success as a cell factory can be attributed to the vast knowledge accumulated over decades of research, its overall ease of engineering and its robustness. Many methods and toolkits have been developed by the yeast metabolic engineering community with the aim of simplifying and accelerating the engineering process.In this chapter, a range of methodologies are highlighted, which can be used to develop novel natural product cell factories or to improve titer, rate and yields of an existing cell factory with the goal of developing an industrially relevant strain. The addressed topics are applicable for different stages of a cell factory engineering project and include the choice of a natural product platform strain, expression cassette design for heterologous or native genes, basic and advanced genetic engineering strategies, and library screening methods using biosensors. The many engineering methods available and the examples of yeast cell factories underline the importance and future potential of this host for industrial production of natural products.

Evaluating and engineering Saccharomyces cerevisiae promoters for increased amylase expression and bioethanol production from raw starch

Bioethanol production from starchy biomass via consolidated bioprocessing (CBP) will benefit from amylolytic Saccharomyces cerevisiae strains that produce high levels of recombinant amylases. This could be achieved by using strong promoters and modification thereof to improve gene expression under industrial conditions. This study evaluated eight endogenous S. cerevisiae promoters for the expression of a starch-hydrolysing α-amylase gene. A total of six of the native promoters were modified to contain a promoter-proximal intron directly downstream of the full-length promoter. Varying results were obtained; four native promoters outperformed the ENO1P benchmark under aerobic conditions and two promoters showed better expression under simulated CBP conditions. The addition of the RPS25A intron significantly improved the expression from most promoters, displaying increased transcript levels, protein concentrations and amylase activities. Raw starch-utilising strains were constructed through co-expression of selected α-amylase cassettes and a glucoamylase gene. The amylolytic strains displayed improved fermentation vigour on raw corn starch and broken rice, reaching 97% of the theoretical ethanol yield and converting 100% of the available carbon to products within 120 h in small-scale CBP fermentations on broken rice. This study showed that enhanced amylolytic strains for the conversion of raw starch to ethanol can be achieved through turnkey promoter selection and/or engineering.

Development of an Haa1-based biosensor for acetic acid sensing in Saccharomyces cerevisiae

Acetic acid is one of the main inhibitors of lignocellulosic hydrolysates and acetic acid tolerance is crucial for the development of robust cell factories for conversion of biomass. As a precursor of acetyl-coenzyme A, it also plays an important role in central carbon metabolism. Thus, monitoring acetic acid levels is a crucial aspect when cultivating yeast. Transcription factor-based biosensors represent useful tools to follow metabolite concentrations. Here, we present the development of an acetic acid biosensor based on the Saccharomyces cerevisiae transcription factor Haa1 that upon binding to acetic acid relocates to the nucleus. In the biosensor, a synthetic transcription factor consisting of Haa1 and BM3R1 from Bacillus megaterium was used to control expression of a reporter gene under a promoter containing BM3R1 binding sites. The biosensor did not drive expression under a promoter containing Haa1 binding sites and responded to acetic acid over a linear range spanning from 10 to 60 mM. To validate its applicability, the biosensor was integrated into acetic acid-producing strains. A direct correlation between biosensor output and acetic acid production was detected. The developed biosensor enables high-throughput screening of strains producing acetic acid and could also be used to investigate acetic acid-tolerant strain libraries.

The multifunctionality of expression systems in Bacillus subtilis: Emerging devices for the production of recombinant proteins

Bacillus subtilis is a successful host for producing recombinant proteins. Its GRAS (generally recognized as safe) status and its remarkable innate ability to absorb and incorporate exogenous DNA into its genome make this organism an ideal platform for the heterologous expression of bioactive substances. The factors that corroborate its value can be attributed to the scientific knowledge obtained from decades of study regarding its biology that has fostered the development of several genetic engineering strategies, such as the use of different plasmids, engineering of constitutive or double promoters, chemical inducers, systems of self-inducing expression with or without a secretion system that uses a signal peptide, and so on. Tools that enrich the technological arsenal of this expression platform improve the efficiency and reduce the costs of production of proteins of biotechnological importance. Therefore, this review aims to highlight the major advances involving recombinant expression systems developed in B. subtilis, thus sustaining the generation of knowledge and its application in future research. It was verified that this bacterium is a model in constant demand and studies of the expression of recombinant proteins on a large scale are increasing in number. As such, it represents a powerful bacterial host for academic research and industrial purposes.

Advances in promoter engineering: novel applications and predefined transcriptional control

Synthetic biology continues to progress by relying on more robust tools for transcriptional control, of which promoters are the most fundamental component. Numerous studies have sought to characterize promoter function, determine principles to guide their engineering, and create promoters with stronger expression or tailored inducible control. In this review, we will summarize promoter architecture and highlight recent advances in the field, focusing on the novel applications of inducible promoter design and engineering towards metabolic engineering and cellular therapeutic development. Additionally, we will highlight how the expansion of new, machine learning techniques for modeling and engineering promoter sequences are enabling more accurate prediction of promoter characteristics. This article is protected by copyright. All rights reserved.

Bacteria-mediated cancer therapies: opportunities and challenges

In recent years, cancer therapy strategies utilizing live tumor-targeting bacteria have presented unique advantages. Engineered bacteria have the particular ability to distinguish tumors from normal tissues with less toxicity. Live bacteria are naturally capable of homing to tumors, resulting in high levels of local colonization because of insufficient oxygen and low pH in the tumor microenvironment. Bacteria initiate their antitumor effects by directly killing the tumor or by activating innate and adaptive antitumor immune responses. The bacterial vectors can be reprogrammed following advanced DNA synthesis, sophisticated genetic bioengineering, and biosensors to engineer microorganisms with complex functions, and then produce and deliver anticancer agents based on clinical needs. However, because of the lack of knowledge on the mechanisms and side effects of microbial cancer therapy, developing such smart microorganisms to treat or prevent cancer remains a significant challenge. In this review, we summarized the potential, status, opportunities and challenges of this growing field. We illustrated the mechanism of tumor regression induced by engineered bacteria and discussed the recent advances in the application of bacteria-mediated cancer therapy to improve efficacy, safety and drug delivery. Finally, we shared our insights into the future directions of tumor-targeting bacteria in cancer therapy.

Production of D-lactic acid containing polyhydroxyalkanoate polymers in yeast Saccharomyces cerevisiae

Polyhydroxyalkanoates (PHAs) provide biodegradable and bio-based alternatives to conventional plastics. Incorporation of 2-hydroxy acid monomers into polymer, in addition to 3-hydroxy acids, offers possibility to tailor the polymer properties. In this study, poly(D-lactic acid) (PDLA) and copolymer P(LA-3HB) were produced and characterized for the first time in the yeast Saccharomyces cerevisiae. Expression of engineered PHA synthase PhaC1437_Ps6–19, propionyl-CoA transferase Pct540Cp, acetyl-CoA acetyltransferase PhaA, and acetoacetyl-CoA reductase PhaB1 resulted in accumulation of 3.6% P(LA-3HB) and expression of engineered enzymes PhaC1Pre and PctMe resulted in accumulation of 0.73% PDLA of the cell dry weight (CDW). According to NMR, P(LA-3HB) contained D-lactic acid repeating sequences. For reference, expression of PhaA, PhaB1, and PHA synthase PhaC1 resulted in accumulation 11% poly(hydroxybutyrate) (PHB) of the CDW. Weight average molecular weights of these polymers were comparable to similar polymers produced by bacterial strains, 24.6, 6.3, and 1 130 kDa for P(LA-3HB), PDLA, and PHB, respectively. The results suggest that yeast, as a robust and acid tolerant industrial production organism, could be suitable for production of 2-hydroxy acid containing PHAs from sugars or from 2-hydroxy acid containing raw materials. Moreover, the wide substrate specificity of PHA synthase enzymes employed increases the possibilities for modifying copolymer properties in yeast in the future.

An engineered genetic circuit for lactose intolerance alleviation

BACKGROUND

Lactose malabsorption occurs in around 68% of the world's population, causing lactose intolerance (LI) symptoms, such as abdominal pain, bloating, and diarrhea. To alleviate LI, previous studies have mainly focused on strengthening intestinal β-galactosidase activity while neglecting the inconspicuous drop in the colon pH caused by the fermentation of non-hydrolyzed lactose by the gut microbes. A drop in colon pH will reduce the intestinal β-galactosidase activity and influence intestinal homeostasis.

RESULTS

Here, we synthesized a tri-stable-switch circuit equipped with high β-galactosidase activity and pH rescue ability. This circuit can switch in functionality between the expression of β-galactosidase and expression of L-lactate dehydrogenase in response to an intestinal lactose signal and intestinal pH signal, respectively. We confirmed that the circuit functionality was efficient in bacterial cultures at a range of pH levels, and in preventing a drop in pH and β-galactosidase activity after lactose administration to mice. An impact of the circuit on gut microbiota composition was also indicated.

CONCLUSIONS

Due to its ability to flexibly adapt to environmental variation, in particular to stabilize colon pH and maintain β-galactosidase activity after lactose influx, the tri-stable-switch circuit can serve as a promising prototype for the relief of lactose intolerance.

Recent advances in engineering of microbial cell factories for intelligent pH regulation and tolerance

pH regulation is a serious concern in the industrial fermentation process as pH adjustment heavily utilizes acid/base and pollutes the environment. Under pH-stress conditions, microbial growth and production of valuable target products may be severely affected. Furthermore, some strains generating acidic or alkaline products require self pH regulation and increased tolerance against pH-stress. For pH control, synthetic biology has provided advanced engineering approaches to construct robust and more intelligent microbial strains, exhibiting tolerance to pH-stress to cope with limitations of pH regulation. This study reviewed the current progress of advanced strain evolution strategies to engineer pH-stress tolerant strains via synthetic biology. In addition, a large number of pH-responsive elements, including promoters, riboswitches, and some proteins have been investigated and applied for construction of pH-responsive genetic circuits and intelligent pH-responsive microbial strains.

Saccharomyces cerevisiae Promoter Engineering before and during the Synthetic Biology Era

Simple Summary

Promoters are DNA sequences where the process of transcription starts. They can work constitutively or be controlled by environmental signals of different types. The quantity of proteins and RNA present in yeast genetic circuits highly depends on promoter strength. Hence, they have been deeply studied and modified over, at least, the last forty years, especially since the year 2000 when Synthetic Biology was born. Here, we present how promoter engineering changed over these four decades and discuss its possible future directions due to novel computational methods and technology.

Abstract

Synthetic gene circuits are made of DNA sequences, referred to as transcription units, that communicate by exchanging proteins or RNA molecules. Proteins are, mostly, transcription factors that bind promoter sequences to modulate the expression of other molecules. Promoters are, therefore, key components in genetic circuits. In this review, we focus our attention on the construction of artificial promoters for the yeast S. cerevisiae, a popular chassis for gene circuits. We describe the initial techniques and achievements in promoter engineering that predated the start of the Synthetic Biology epoch of about 20 years. We present the main applications of synthetic promoters built via different methods and discuss the latest innovations in the wet-lab engineering of novel promoter sequences.

A Reporter System for Cytosolic Protein Aggregates in Yeast

Protein misfolding and aggregation are linked to neurodegenerative diseases of mammals and suboptimal protein expression within biotechnology. Tools for monitoring protein aggregates are therefore useful for studying disease-related aggregation and for improving soluble protein expression in heterologous hosts for biotechnology purposes. In this work, we developed a promoter-reporter system for aggregated protein on the basis of the yeast native response to misfolded protein. To this end, we first studied the proteome of yeast in response to the expression of folded soluble and aggregation-prone protein baits and identified genes encoding proteins related to protein folding and the response to heat stress as well as the ubiquitin-proteasome system that are over-represented in cells expressing an aggregation-prone protein. From these data, we created and validated promoter-reporter constructs and further engineered the best performing promoters by increasing the copy number of upstream activating sequences and optimization of culture conditions. Our best promoter-reporter has an output dynamic range of approximately 12-fold upon expression of the aggregation-prone protein and responded to increasing levels of aggregated protein. Finally, we demonstrate that the system can discriminate between yeast cells expressing different prion precursor proteins and select the cells expressing folded soluble protein from mixed populations. Our reporter system is thus a simple tool for diagnosing protein aggregates in living cells and should be applicable for the health and biotechnology industries.

Statistical Design of Experiments for Synthetic Biology

The design and optimization of biological systems is an inherently complex undertaking that requires careful balancing of myriad synergistic and antagonistic variables. However, despite this complexity, much synthetic biology research is predicated on One Factor at A Time (OFAT) experimentation; the genetic and environmental variables affecting the activity of a system of interest are sequentially altered while all other variables are held constant. Beyond being time and resource intensive, OFAT experimentation crucially ignores the effect of interactions between factors. Given the ubiquity of interacting genetic and environmental factors in biology this failure to account for interaction effects in OFAT experimentation can result in the development of suboptimal systems. To address these limitations, an increasing number of studies have turned to Design of Experiments (DoE), a suite of methods that enable efficient, systematic exploration and exploitation of complex design spaces. This review provides an overview of DoE for synthetic biologists. Key concepts and commonly used experimental designs are introduced, and we discuss the advantages of DoE as compared to OFAT experimentation. We dissect the applicability of DoE in the context of synthetic biology and review studies which have successfully employed these methods, illustrating the potential of statistical experimental design to guide the design, characterization, and optimization of biological protocols, pathways, and processes.

Dynamic control in metabolic engineering: Theories, tools, and applications

Metabolic engineering has allowed the production of a diverse number of valuable chemicals using microbial organisms. Many biological challenges for improving bio-production exist which limit performance and slow the commercialization of metabolically engineered systems. Dynamic metabolic engineering is a rapidly developing field that seeks to address these challenges through the design of genetically encoded metabolic control systems which allow cells to autonomously adjust their flux in response to their external and internal metabolic state. This review first discusses theoretical works which provide mechanistic insights and design choices for dynamic control systems including two-stage, continuous, and population behavior control strategies. Next, we summarize molecular mechanisms for various sensors and actuators which enable dynamic metabolic control in microbial systems. Finally, important applications of dynamic control to the production of several metabolite products are highlighted, including fatty acids, aromatics, and terpene compounds. Altogether, this review provides a comprehensive overview of the progress, advances, and prospects in the design of dynamic control systems for improved titer, rate, and yield metrics in metabolic engineering.

Using a Design of Experiments Approach to Inform the Design of Hybrid Synthetic Yeast Promoters

Hybrid promoter engineering takes advantage of the modular nature of eukaryotic promoters by combining discrete promoter motifs to confer novel regulatory function. By combinatorially screening sequence libraries for trans-acting transcriptional operators, activators, repressors and core promoter sequences, it is possible to derive constitutive or inducible promoter collections covering a broad range of expression strengths. However, combinatorial approaches to promoter design can result in highly complex, multidimensional design spaces, which can be experimentally costly to thoroughly explore in vivo. Here, we describe an in silico pipeline for the design of hybrid promoter libraries that employs a Design of Experiments (DoE) approach to reduce experimental burden and efficiently explore the promoter fitness landscape. We also describe a software pipeline to ensure that the designed promoter sequences are compatible with the YTK assembly standard.

Capturing and Understanding the Dynamics and Heterogeneity of Gene Expression in the Living Cell

The regulation of gene expression is a fundamental process enabling cells to respond to internal and external stimuli or to execute developmental programs. Changes in gene expression are highly dynamic and depend on many intrinsic and extrinsic factors. In this review, we highlight the dynamic nature of transient gene expression changes to better understand cell physiology and development in general. We will start by comparing recent in vivo procedures to capture gene expression in real time. Intrinsic factors modulating gene expression dynamics will then be discussed, focusing on chromatin modifications. Furthermore, we will dissect how cell physiology or age impacts on dynamic gene regulation and especially discuss molecular insights into acquired transcriptional memory. Finally, this review will give an update on the mechanisms of heterogeneous gene expression among genetically identical individual cells. We will mainly focus on state-of-the-art developments in the yeast model but also cover higher eukaryotic systems.

Metabolic Engineering Strategies for Sustainable Terpenoid Flavor and Fragrance Synthesis

Terpenoids derived from plant material are widely applied in the flavor and fragrance industry. Traditional extraction methods are unsustainable, but microbial synthesis offers a promising solution to attain efficient production of natural-identical terpenoids. Overproduction of terpenoids in microbes requires careful balancing of the synthesis pathway constituents within the constraints of host cell metabolism. Advances in metabolic engineering have greatly facilitated overcoming the challenges of achieving high titers, rates, and yields (TRYs). The review summarizes recent development in the molecular biology toolbox to achieve high TRYs for terpenoid biosynthesis, mainly in the two industrial platform microorganisms: Escherichia coli and Saccharomyces cerevisiae. The biosynthetic pathways, including alternative pathway designs, are briefly introduced, followed by recently developed methodologies used for pathway, genome, and strain optimization. Integrated applications of these tools are important to achieve high "TRYs" of terpenoid production and pave the way for translating laboratory research into successful commercial manufacturing.

Promoter Architecture and Promoter Engineering in Saccharomyces cerevisiae

Promoters play an essential role in the regulation of gene expression for fine-tuning genetic circuits and metabolic pathways in Saccharomyces cerevisiae (S. cerevisiae). However, native promoters in S. cerevisiae have several limitations which hinder their applications in metabolic engineering. These limitations include an inadequate number of well-characterized promoters, poor dynamic range, and insufficient orthogonality to endogenous regulations. Therefore, it is necessary to perform promoter engineering to create synthetic promoters with better properties. Here, we review recent advances related to promoter architecture, promoter engineering and synthetic promoter applications in S. cerevisiae. We also provide a perspective of future directions in this field with an emphasis on the recent advances of machine learning based promoter designs.

Mining and fine-tuning sugar uptake system for titer improvement of milbemycins in Streptomyces bingchenggensis

Dramatic decrease of sugar uptake is a general phenomenon in Streptomyces at stationary phase, when antibiotics are extensively produced. Milbemycins produced by Streptomyces bingchenggensis are a group of valuable macrolide biopesticides, while the low yield and titer impede their broad applications in agricultural field. Considering that inadequate sugar uptake generally hinders titer improvement of desired products, we mined the underlying sugar uptake systems and fine-tuned their expression in this work. First, we screened the candidates at both genomic and transcriptomic level in S. bingchenggensis. Then, two ATP-binding cassette transporters named TP2 and TP5 were characterized to improve milbemycin titer and yield significantly. Next, the appropriate native temporal promoters were selected and used to tune the expression of TP2 and TP5, resulting in a maximal milbemycin A3/A4 titer increase by 36.9% to 3321 mg/L. Finally, TP2 and TP5 were broadly fine-tuned in another two macrolide biopesticide producers Streptomyces avermitilis and Streptomyces cyaneogriseus, leading to a maximal titer improvement of 34.1% and 52.6% for avermectin B_1a and nemadectin, respectively. This work provides useful transporter tools and corresponding engineering strategy for Streptomyces.

Permutational analysis of Saccharomyces cerevisiae regulatory elements

Gene expression in Saccharomyces cerevisiae is regulated at multiple levels. Genomic and epigenomic mapping of transcription factors and chromatin factors has led to the delineation of various modular regulatory elements—enhancers (upstream activating sequences), core promoters, 5′ untranslated regions (5′ UTRs) and transcription terminators/3′ untranslated regions (3′ UTRs). However, only a few of these elements have been tested in combinations with other elements and the functional interactions between the different modular regulatory elements remain under explored. We describe a simple and rapid approach to build a combinatorial library of regulatory elements and have used this library to study 26 different enhancers, core promoters, 5′ UTRs and transcription terminators/3′ UTRs to estimate the contribution of individual regulatory parts in gene expression. Our combinatorial analysis shows that while enhancers initiate gene expression, core promoters modulate the levels of enhancer-mediated expression and can positively or negatively affect expression from even the strongest enhancers. Principal component analysis (PCA) indicates that enhancer and promoter function can be explained by a single principal component while UTR function involves multiple functional components. The PCA also highlights outliers and suggest differences in mechanisms of regulation by individual elements. Our data also identify numerous regulatory cassettes composed of different individual regulatory elements that exhibit equivalent gene expression levels. These data thus provide a catalog of elements that could in future be used in the design of synthetic regulatory circuits.

Biosensors design in yeast and applications in metabolic engineering

Engineering microbial cell factories is a potential approach of sustainable production of chemicals, fuels and pharmaceuticals. However, testing the production of molecules in high throughput is still a time-consuming and laborious process since product synthesis usually does not confer a clear phenotype. Therefore, it is necessary to develop new techniques for fast high-producer screening. Genetically encoded biosensors are considered to be promising devices for high-throughput analysis owing to their ability to sense metabolites and couple detection to an actuator, thereby facilitating the rapid detection of small molecules at single-cell level. Here, we review recent advances in the design and engineering of biosensors in Saccharomyces cerevisiae, and their applications in metabolic engineering. Three types of biosensor are introduced in this review: transcription factor based, RNA-based and enzyme-coupled biosensors. The studies to improve the features of biosensors are also described. Moreover, we summarized their metabolic engineering applications in dynamic regulation and high producer selection. Current challenges in biosensor design and future perspectives on sensor applications are also discussed.

A pH-responsive genetic sensor for the dynamic regulation of D-xylonic acid accumulation in Escherichia coli

The xylose oxidative pathway (XOP) is continuously gaining prominence as an alternative for the traditional pentose assimilative pathways in prokaryotes. It begins with the oxidation of D-xylose to D-xylonic acid, which is further converted to α-ketoglutarate or pyruvate + glycolaldehyde through a series of enzyme reactions. The persistent drawback of XOP is the accumulation of D-xylonic acid intermediate that causes culture media acidification. This study addresses this issue through the development of a novel pH-responsive synthetic genetic controller that uses a modified transmembrane transcription factor called CadCΔ. This genetic circuit was tested for its ability to detect extracellular pH and to control the buildup of D-xylonic acid in the culture media. Results showed that the pH-responsive genetic sensor confers dynamic regulation of D-xylonic acid accumulation, which adjusts with the perturbation of culture media pH. This is the first report demonstrating the use of a pH-responsive transmembrane transcription factor as a transducer in a synthetic genetic circuit that was designed for XOP. This may serve as a benchmark for the development of other genetic controllers for similar pathways that involve acidic intermediates.

Synthetic control devices for gene regulation in Penicillium chrysogenum

Background

Orthogonal, synthetic control devices were developed for Penicillium chrysogenum, a model filamentous fungus and industrially relevant cell factory. In the synthetic transcription factor, the QF DNA-binding domain of the transcription factor of the quinic acid gene cluster of Neurospora crassa is fused to the VP16 activation domain. This synthetic transcription factor controls the expression of genes under a synthetic promoter containing quinic acid upstream activating sequence (QUAS) elements, where it binds. A gene cluster may demand an expression tuned individually for each gene, which is a great advantage provided by this system.

Results

The control devices were characterized with respect to three of their main components: expression of the synthetic transcription factors, upstream activating sequences, and the affinity of the DNA binding domain of the transcription factor to the upstream activating domain. This resulted in synthetic expression devices, with an expression ranging from hardly detectable to a level similar to that of highest expressed native genes. The versatility of the control device was demonstrated by fluorescent reporters and its application was confirmed by synthetically controlling the production of penicillin.

Conclusions

The characterization of the control devices in microbioreactors, proved to give excellent indications for how the devices function in production strains and conditions. We anticipate that these well-characterized and robustly performing control devices can be widely applied for the production of secondary metabolites and other compounds in filamentous fungi.

Engineering strong and stress-responsive promoters in Bacillus subtilis by interlocking sigma factor binding motifs

Prokaryotic gene expression is largely regulated on transcriptional levels with the involvement of promoters, RNA polymerase and sigma factors. Developing new promoters to customize gene transcriptional regulation becomes increasingly demanded in synthetic biology and biotechnology. In this study, we designed synthetic promoters in the Gram-positive model bacterium Bacillus subtilis by interlocking the binding motifs of σ^A for house-keeping gene expression and that of two alternative sigma factors σ^H and σ^B which are involved in responding post-exponential growth and general stress, respectively. The developed promoters are recognized by multiple sigma factors and hence generate strong transcriptional strength when host cells grow under normal or stressed conditions. With green fluorescent protein as the reporter, a set of strong promoters were identified, in which the transcription activities of P_HA-1, P_HAB-4, P_HAB-7 were 18.6, 4.1, 3.3 fold of that of the commonly used promoter P₄₃, respectively. Moreover, some of the promoters such as P_HA-1, P_HAB-4, P_HAB-7, P_BA-2 displayed increased transcriptional activities in response to high salinity or low pH. The promoters developed in this study should enrich the biotechnological toolboxes of B. subtilis.