Calcium ion-dependent reactivation of a Pseudomonas lipase by its specific modulating protein, LipB

A Novel Fungal Lipase With Methanol Tolerance and Preference for Macaw Palm Oil

Macaw palm is a highly oil-producing plant, which presents high contents of free fatty acids, being a promising feedstock for biofuel production. The current chemical routes are costly and complex, involving highly harsh industrial conditions. Enzymatic processing is a potential alternative; however, it is hampered by the scarce knowledge on biocatalysts adapted to this acidic feedstock. This work describes a novel lipase isolated from the thermophilic fungus Rasamsonia emersonii (ReLip), which tolerates extreme conditions such as the presence of methanol, high temperatures, and acidic medium. Among the tested feedstocks, the enzyme showed the highest preference for macaw palm oil, producing a hydrolyzate with a final free fatty acid content of 92%. Crystallographic studies revealed a closed conformation of the helical amphipathic lid that typically undergoes conformational changes in a mechanism of interfacial activation. Such conformation of the lid is stabilized by a salt bridge, not observed in other structurally characterized homologs, which is likely involved in the tolerance to organic solvents. Moreover, the lack of conservation of the aromatic cluster IxxWxxxxxF in the lid of ReLip with the natural mutation of the phenylalanine by an alanine might be correlated with the preference of short acyl chains, although preserving catalytic activity on insoluble substrates. In addition, the presence of five acidic amino acids in the lid of ReLip, a rare property reported in other lipases, may have contributed to its ability to tolerate and be effective in acidic environments. Therefore, our work describes a new fungal biocatalyst capable of efficiently hydrolyzing macaw oil, an attractive feedstock for the production of "drop-in" biofuels, with high desirable feature for industrial conditions such as thermal and methanol tolerance, and optimum acidic pH. Moreover, the crystallographic structure was elucidated, providing a structural basis for the enzyme substrate preference and tolerance to organic solvents.

Changes of Thermostability, Organic Solvent, and pH Stability in Geobacillus zalihae HT1 and Its Mutant by Calcium Ion

Thermostable T1 lipase from Geobacillus zalihae has been crystallized using counter-diffusion method under space and Earth conditions. The comparison of the three-dimensional structures from both crystallized proteins show differences in the formation of hydrogen bond and ion interactions. Hydrogen bond and ion interaction are important in the stabilization of protein structure towards extreme temperature and organic solvents. In this study, the differences of hydrogen bond interactions at position Asp43, Thr118, Glu250, and Asn304 and ion interaction at position Glu226 was chosen to imitate space-grown crystal structure, and the impact of these combined interactions in T1 lipase-mutated structure was studied. Using space-grown T1 lipase structure as a reference, subsequent simultaneous mutation D43E, T118N, E226D, E250L, and N304E was performed on recombinant wild-type T1 lipase (wt-HT1) to generate a quintuple mutant term as 5M mutant lipase. This mutant lipase shared similar characteristics to its wild-type in terms of optimal pH and temperature. The stability of mutant 5M lipase improved significantly in acidic and alkaline pH as compared to wt-HT1. 5M lipase was highly stable in organic solvents such as dimethyl sulfoxide (DMSO), methanol, and n-hexane compared to wt-HT1. Both wild-type and mutant lipases were found highly activated in calcium as compared to other metal ions due to the presence of calcium-binding site for thermostability. The presence of calcium prolonged the half-life of mutant 5M and wt-HT1, and at the same time increased their melting temperature (T_m). The melting temperature of 5M and wt-HT1 lipases increased at 8.4 and 12.1 °C, respectively, in the presence of calcium as compared to those without. Calcium enhanced the stability of mutant 5M in 25% (v/v) DMSO, n-hexane, and n-heptane. The lipase activity of wt-HT1 also increased in 25% (v/v) ethanol, methanol, acetonitrile, n-hexane, and n-heptane in the presence of calcium. The current study showed that the accumulation of amino acid substitutions D43E, T118N, E226D, E250L, and N304E produced highly stable T1 mutant when hydrolyzing oil in selected organic solvents such as DMSO, n-hexane, and n-heptane. It is also believed that calcium ion plays important role in regulating lipase thermostability.

Cold-adapted organic solvent tolerant alkalophilic family I.3 lipase from an Antarctic Pseudomonas

Lipolytic enzymes with cold adaptation are gaining increasing interest due to their biotechnological prospective. Previously, a cold adapted family I.3 lipase (AMS8 lipase) was isolated from an Antarctic Pseudomonas. AMS8 lipase was largely expressed in insoluble form. The refolded His-tagged recombinant AMS8 lipase was purified with 23.0% total recovery and purification factor of 9.7. The purified AMS8 lipase migrated as a single band with a molecular weight approximately 65kDa via electrophoresis. AMS8 lipase was highly active at 30°C at pH 10. The half-life of AMS8 lipase was reported at 4 and 2h under the incubation of 30 and 40°C, respectively. The lipase was stable over a broad range of pH. It showed enhancement effect in its relative activity under the presence of Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺ after 30min treatment. Heavy metal ions such as Cu²⁺, Fe³⁺ and Zn²⁺ inhibited AMS8 activity. This cold adapted alkalophilic AMS lipase was also active in various organic solvent of different polarity. These unique properties of this biological macromolecule will provide considerable potential for many biotechnological applications and organic synthesis at low temperature.

Expression and chaperone-assisted refolding of a new cold-active lipase from Psychrobacter cryohalolentis K5(T)

We describe cloning and expression of genes coding for lipase Lip2Pc and lipase-specific foldase LifPc from a psychrotrophic microorganism Psychrobacter cryohalolentis K5(T) isolated from a Siberian cryopeg (the lense of overcooled brine within permafrost). Upon expression in Escherichiacoli Lip2Pc accumulated in inclusion bodies while chaperone was synthesized in a soluble form. An efficient protocol for solubilization and subsequent refolding of the recombinant lipase in the presence of the truncated chaperone was developed. Using this procedure Lip2Pc with specific activity of 6900U/mg was obtained. Contrary to published data on other lipase-chaperone complexes, refolded Lip2Pc was mostly recovered from the complex with chaperone by metal-affinity chromatography. Recombinant Lip2Pc displayed maximum lipolytic activity at 25°C and pH 8.0 with p-nitrophenyl palmitate (C16) as a substrate. Activity assays conducted at different temperatures revealed that the recombinant Lip2Pc is a cold-adapted lipase with ability to utilize substrates with long (C10-C16) hydrocarbon chains in the temperature range from +5 to +65°C. It demonstrated relatively high stability at temperatures above 60°C and in the presence of various metal ions or organic solvents (ethanol, methanol, etc.). Non-ionic detergents, such as Triton X-100 and Tween 20 decreased Lip2Pc activity and SDS completely inhibited it.

Hyper-activation of foldase-dependent lipase with lipase-specific foldase

The LST-03 lipase from Pseudomonas aeruginosa LST-03 requires lipase-specific foldase for activation. Abundant expression of the active lipase was successfully accomplished with individual expression of the lipase and foldase in a heterologous host and subsequent in vitro activation. Although the activity of the native lipase from culture supernatant of P. aeruginosa LST-03 was 110 kI.U./g, that after in vitro activation using individually expressed lipase and foldase was 228 kI.U./g. Furthermore, the activity after in vitro activation with afterwards adding calcium ions was 359 kI.U./g. However, the incubation of the lipase with the foldase in the presence of calcium ions resulted in a small conformational transition and low activation levels of the lipase by the foldase. The lipase showed high affinity for the foldase in the presence of calcium ions. The results indicate that in a cellular environment that contains calcium ions, the lipase would not become a hyperactive form by the foldase.

Production of a solvent, detergent, and thermotolerant lipase by a newly isolated Acinetobacter sp. in submerged and solid-state fermentations

The lipase production ability of a newly isolated Acinetobacter sp. in submerged (SmF) and solid-state (SSF) fermentations was evaluated. The results demonstrated this strain as one of the rare bacterium, which is able to grow and produce lipase in SSF even more than SmF. Coconut oil cake as a cheap agroindustrial residue was employed as the solid substrate. The lipase production was optimized in both media using artificial neural network. Multilayer normal and full feed forward backpropagation networks were selected to build predictive models to optimize the culture parameters for lipase production in SmF and SSF systems, respectively. The produced models for both systems showed high predictive accuracy where the obtained conditions were close together. The produced enzyme was characterized as a thermotolerant lipase, although the organism was mesophile. The optimum temperature for the enzyme activity was 45°C where 63% of its activity remained at 70°C after 2 h. This lipase remained active after 24 h in a broad range of pH (6-11). The lipase demonstrated strong solvent and detergent tolerance potentials. Therefore, this inexpensive lipase production for such a potent and industrially valuable lipase is promising and of considerable commercial interest for biotechnological applications.

Co-expression of the lipase and foldase of Pseudomonas aeruginosa to a functional lipase in Escherichia coli

The lipA gene, a structural gene encoding for protein of molecular mass 48 kDa, and lipB gene, encoding for a lipase-specific chaperone with molecular mass of 35 kDa, of Pseudomonas aeruginosa B2264 were co-expressed in heterologous host Escherichia coli BL21 (DE3) to obtain in vivo expression of functional lipase. The recombinant lipase was expressed with histidine tag at its N terminus and was purified to homogeneity using nickel affinity chromatography. The amino acid sequence of LipA and LipB of P. aeruginosa B2264 was 99-100% identical with the corresponding sequence of LipA and LipB of P. aeruginosa LST-03 and P. aeruginosa PA01, but it has less identity with Pseudomonas cepacia (Burkholderia cepacia) as it showed only 37.6% and 23.3% identity with the B. cepacia LipA and LipB sequence, respectively. The molecular mass of the recombinant lipase was found to be 48 kDa. The recombinant lipase exhibited optimal activity at pH 8.0 and 37 degrees C, though it was active between pH 5.0 and pH 9.0 and up to 45 degrees C. K (m) and V (max) values for recombinant P. aeruginosa lipase were found to be 151.5 +/- 29 microM and 217 +/- 22.5 micromol min(-1) mg(-1) protein, respectively.

Cloning and expression of gene, and activation of an organic solvent-stable lipase from Pseudomonas aeruginosa LST-03

Organic solvent-tolerant Pseudomonas aeruginosa LST-03 secretes an organic solvent-stable lipase, LST-03 lipase. The gene of the LST-03 lipase (Lip9) and the gene of the lipase-specific foldase (Lif9) were cloned and expressed in Escherichia coli. In the cloned 2.6 kbps DNA fragment, two open reading frames, Lip9 consisting of 933 nucleotides which encoded 311 amino acids and Lif9 consisting of 1,020 nucleotides which encoded 340 amino acids, were found. The overexpression of the lipase gene (lip9) was achieved when T7 promoter was used and the signal peptide of the lipase was deleted. The expressed amount of the lipase was greatly increased and overexpressed lipase formed inclusion body in E. coli cell. The collected inclusion body of the lipase from the cell was easily solubilized by urea and activated by using lipase-specific foldase of which 52 or 58 amino acids of N-terminal were deleted. Especially, the N-terminal methionine of the lipase of which the signal peptide was deleted was released in E. coli and the amino acid sequence was in agreement with that of the originally-produced lipase by P. aeruginosa LST-03. Furthermore, the overexpressed and solubilized lipase of which the signal peptide was deleted was more effectively activated by lipase-specific foldase.

Functional Cell-Surface Display of a Lipase-Specific Chaperone

Lipases are important enzymes in biotechnology. Extracellular bacterial lipases from Pseudomonads and related species require the assistance of specific chaperones, designated "Lif" proteins (lipase specific foldases). Lifs, a unique family of steric chaperones, are anchored to the periplasmic side of the inner membrane where they convert lipases into their active conformation. We have previously shown that the autotransporter protein EstA from P. aeruginosa can be used to direct a variety of proteins to the cell surface of Escherichia coli. Here we demonstrate for the first time the functional cell-surface display of the Lif chaperone and FACS (fluorescence-activated cell sorting)-based analysis of bacterial cells that carried foldase-lipase complexes. The model Lif protein, LipH from P. aeruginosa, was displayed at the surface of E. coli cells. Surface exposed LipH was functional and efficiently refolded chemically denatured lipase. The foldase autodisplay system reported here can be used for a variety of applications including the ultrahigh-throughput screening of large libraries of foldase variants generated by directed evolution.

Directed evolution of Pseudomonas aeruginosa lipase for improved amide-hydrolyzing activity

A lipase from Pseudomonas aeruginosa was subjected to directed molecular evolution for increased amide-hydrolyzing (amidase) activity. A single round of random mutagenesis followed by screening for hydrolytic activity for oleoyl 2-naphthylamide as compared with that for oleoyl 2-naphthyl ester identified five mutants with 1.7-2.0-fold increased relative amidase activities. Three mutational sites (F207S, A213D and F265L) were found to affect the amidase/esterase activity ratios. The combination of these mutations further improved the amidase activity. Active-site titration using a fluorescent phosphonic acid ester allowed the molecular activities for the amide and the ester to be determined for each mutant without purification of the lipase. A double mutant F207S/A213D gave the highest molecular activity of 1.1 min(-1) for the amide, corresponding to a 2-fold increase compared with that of the wild-type lipase. A structural model of the lipase indicated that the mutations occurred at the sites near the surface and remote from the catalytic triad, but close to the calcium binding site. This study is a first step towards understanding why lipases do not hydrolyze amides despite the similarities to serine proteases in the active site structure and the reaction mechanism and towards the preparation of a general acyl transfer catalyst for the biotransformation of amides.

Lipase-Specific Foldases

Lipases represent the most important class of enzymes used in biotechnology. Many bacteria produce and secrete lipases but the enzymes originating from Pseudomonas and Burkholderia species seem to be particularly useful for a wide variety of different biocatalytic applications. These enzymes are usually encoded in an operon together with a second gene which codes for a lipase-specific foldase, Lif, which is necessary to obtain enzymatically active lipase. A detailed analysis based on amino acid homology has suggested the classification of Lif proteins into four different families and also revealed the presence of a conserved motif, Rx1x2FDY(F/C)L(S/T)A. Recent experimental evidence suggests that Lifs are so-called steric chaperones, which exert their physiological function by lowering energetic barriers during the folding of their cognate lipases, thereby providing essential steric information needed to fold lipases into their enzymatically active conformation.

In vitro analysis of roles of a disulfide bridge and a calcium binding site in activation of Pseudomonas sp. strain KWI-56 lipase

The expression of lipase from Pseudomonas sp. strain KWI-56 (recently reclassified as Burkholderia cepacia) had been found to be dependent on an activator gene (act) downstream of its structural gene (lip). In this work, the mature lipase was synthesized in an enzymatically active form with a cell-free Escherichia coli S30 coupled transcription-translation system by expressing a recombinant lipase gene (rlip) encoding the mature lipase in the presence of its purified activator or by coexpression of rlip and act. The in vitro expression systems were used for studying the folding process of the lipase. The addition of dithiothreitol in the expression systems decreased the activity dramatically without affecting the synthesis level of the lipase, whereas the in vitro-synthesized active lipase was relatively stable even in the presence of dithiothreitol. This phenomenon was further investigated by constructing mutant lipase genes only in vitro by PCR without gene cloning. Replacements of cysteine residues (Cys190 and Cys270) forming a sole putative disulfide bond to serine residues decreased the lipase activity greatly, suggesting that the disulfide bond was essential for the proper folding of the lipase. In addition, replacing Asp242 and Asp288, which were deduced to be part of a Ca(2+) binding site, also greatly decreased the activities of the in vitro-synthesized lipases. The role of the Ca(2+) binding site in the activation of the lipase is also discussed.

Bacterial biocatalysts: molecular biology, three-dimensional structures, and biotechnological applications of lipases

Bacteria produce and secrete lipases, which can catalyze both the hydrolysis and the synthesis of long-chain acylglycerols. These reactions usually proceed with high regioselectivity and enantioselectivity, and, therefore, lipases have become very important stereoselective biocatalysts used in organic chemistry. High-level production of these biocatalysts requires the understanding of the mechanisms underlying gene expression, folding, and secretion. Transcription of lipase genes may be regulated by quorum sensing and two-component systems; secretion can proceed either via the Sec-dependent general secretory pathway or via ABC transporters. In addition, some lipases need folding catalysts such as the lipase-specific foldases and disulfide-bond-forming proteins to achieve a secretion-competent conformation. Three-dimensional structures of bacterial lipases were solved to understand the catalytic mechanism of lipase reactions. Structural characteristics include an alpha/beta hydrolase fold, a catalytic triad consisting of a nucleophilic serine located in a highly conserved Gly-X-Ser-X-Gly pentapeptide, and an aspartate or glutamate residue that is hydrogen bonded to a histidine. Four substrate binding pockets were identified for triglycerides: an oxyanion hole and three pockets accommodating the fatty acids bound at position sn-1, sn-2, and sn-3. The differences in size and the hydrophilicity/hydrophobicity of these pockets determine the enantiopreference of a lipase. The understanding of structure-function relationships will enable researchers to tailor new lipases for biotechnological applications. At the same time, directed evolution in combination with appropriate screening systems will be used extensively as a novel approach to develop lipases with high stability and enantioselectivity.

Modulator-mediated synthesis of active lipase of Pseudomonas sp. 109 by Escherichia coli cell-free coupled transcription/translation system

Catalytically active lipase was synthesized using Escherichia coli S30 extract from the signal-deleted lipL gene (lipL) in the presence of its N-terminal hydrophobic fragment-truncated modulator (rLimL) that was purified from the overexpressing E. coli cells. The specific activity of the lipase thus synthesized was 125 times higher than that of the purified one from Pseudomonas sp. 109. No lipase activity was detected in the absence of rLimL, even though the lipase protein itself was synthesized. Active lipase was also produced in vitro by coexpression of rlipL and the modulator gene (rlimL), although a much smaller amount of the lipase was formed. In the absence of rLimL, aggregates of the lipase were formed during its folding process. The addition of rLimL proportionally raised both lipase solubility and enzyme activity. An unstable but high activity peak of the lipase was found during its folding process.