A study of the mechanism of action of Taka-amylase A1 on linear oligosaccharides by product analysis and computer simulation

Insights into the catalytic mechanism of Grimontia hollisae collagenase through structural and mutational analyses

Grimontia hollisae collagenase (Ghcol) exhibits high collagen-degrading activity. To explore its catalytic mechanism, its substrate (Gly-Pro-Hyp-Gly-Pro-Hyp, GPOGPO)-complexed crystal structure was determined at 2.0 Å resolution. A water molecule was observed near the active-site zinc ion. Since this water was not observed in the product (GPO)-complexed Ghcol, it was hypothesized that the GPOGPO-complexed Ghcol structure reflects a Michaelis complex, providing a structural basis for understanding the catalytic mechanism. Analyses of the active-site geometry and site-directed mutagenesis of the active-site tyrosine residues revealed that Glu493 and Tyr564 were essential for catalysis, suggesting that Glu493 functions as an acid and base catalyst while Tyr564 stabilizes the tetrahedral complex in the transition state. These results shed light on the catalytic mechanism of bacterial collagenase.

Illuminating glycoscience: synthetic strategies for FRET-enabled carbohydrate active enzyme probes

Carbohydrates are synthesised, refined and degraded by carbohydrate active enzymes. FRET is emerging as a powerful tool to monitor and quantify their activity as well as to test inhibitors as new drug candidates and monitor disease.

Structure of maltotetraose-forming amylase from Pseudomonas saccharophila STB07 provides insights into its product specificity

The maltooligosaccharide-forming amylases (MFAses) degrade starch into maltooligosaccharides which potentially benefit human diet and grow popular in food processing, but little has been studied about their product specificity and structures. We focused on this topic and provide evidence through an X-ray crystal structure of the maltotetraose (G4)-forming amylase from Pseudomonas saccharophila STB07 (MFA_ps), as well as co-crystal structures of MFA_ps with G4 and with pseudo-maltoheptaose (pseudo-G7) determined at up to 1.1 Å resolution. G4 and pseudo-G7 occupy active cleft subsites -4 to -1 and -4 to +3 respectively. Binding induces conformational changes in the active sites except Asp193, working as the base catalyst. Comparison of the MFA_ps structure with those of other α-amylases revealed obvious differences in the loop structures providing dominant interactions between protein and substrate in the non-reducing side of the active sites cleft. These structures at the non-reducing end may govern the G4 specificity of MFA_ps and also be relevant to its exo-type action pattern.

Increase in the thermostability of Bacillus sp. strain TAR-1 xylanase using a site saturation mutagenesis library

Site saturation mutagenesis library is a recently developed technique, in which any one out of all amino acid residues in a target region is substituted into other 19 amino acid residues. In this study, we used this technique to increase the thermostability of a GH10 xylanase, XynR, from Bacillus sp. strain TAR-1. We hypothesized that the substrate binding region of XynR is flexible, and that the thermostability of XynR will increase if the flexibility of the substrate binding region is decreased without impairing the substrate binding ability. Site saturation mutagenesis libraries of amino acid residues Tyr43–Lys115 and Ala300–Asn325 of XynR were constructed. By screening 480 clones, S92E was selected as the most thermostable one, exhibiting the residual activity of 80% after heat treatment at 80°C for 15 min in the hydrolysis of Remazol Brilliant Blue-xylan. Our results suggest that this strategy is effective for stabilization of GH10 xylanase.

Abbreviations: DNS: 3,5-dinitrosalicylic acid; RBB-xylan: Remazol Brilliant Blue-xylan

Predominant Nonproductive Substrate Binding by Fungal Cellobiohydrolase I and Implications for Activity Improvement

Enzymatic conversion of the most abundant renewable source of organic compounds, cellulose to fermentable sugars is attractive for production of green fuels and chemicals. The major component of industrial enzyme systems, cellobiohydrolase I from Hypocrea jecorina (Trichoderma reesei) (HjCel7A) processively splits disaccharide units from the reducing ends of tightly packed cellulose chains. HjCel7A consists of a catalytic domain (CD) and a carbohydrate-binding module (CBM) separated by a linker peptide. A tunnel-shaped substrate-binding site in the CD includes nine subsites for β-d-glucose units, seven of which (-7 to -1) precede the catalytic center. Low catalytic activity of Cel7A is the bottleneck and the primary target for improvement. Here it is shown for the first time that, in spite of much lower apparent k_cat of HjCel7A at the hydrolysis of β-1,4-glucosidic linkages in the fluorogenic cellotetra- and -pentaose compared to the structurally related endoglucanase I (HjCel7B), the specificity constants (catalytic efficiency) k_cat /K_m for both enzymes are almost equal in these reactions. The observed activity difference appears from strong nonproductive substrate binding by HjCel7A, particularly significant for MU-β-cellotetraose (MUG₄ ). Interaction of substrates with the subsites -6 and -5 proximal to the nonconserved Gln101 residue in HjCel7A decreases K_m,ap by >1500 times. HjCel7A can be nonproductively bound onto cellulose surface with K_d ≈2-9 nM via CBM and CD that captures six terminal glucose units of cellulose chain. Decomposition of this nonproductive complex can determine the rate of cellulose conversion. MUG₄ is a promising substrate to select active cellobiohydrolase I variants with reduced nonproductive substrate binding.

Improving Hydrolysis Characteristics of Xylanases by Site-Directed Mutagenesis in Binding-Site Subsites from Streptomyces L10608

The preparation of oligosaccharides via xylan hydrolysis is an effective way to add value to hemicellulosic material of agricultural waste. The bacterial strain Streptomyces L10608, isolated from soil, contains genes encoding xylanases of glucoside hydrolase family 10/11 (GH10/11), and these have been cloned to catalyze the production of xylooligosaccharide (XOS). To improve the XOS proportion of hydrolysates produced by xylanase, four amino acid residues were substituted by site-directed mutagenesis, and the mutant genes were overexpressed in Escherichia coli. Mutations replaced the codons encoding Asn214 (+2) and Asn86 (−2) by Ala and removed the Ricin B-lectin domain in GH10-xyn, and mutants Y115A (−2) and Y123A (−2) were produced for GH11-xyn. Interestingly, GH10-N86Q had significantly increased hydrolysis of XOS and almost eliminated xylose (X1) to <2.5%, indicating that the −2 binding site of GH10-xyn of L10608 is required for binding with xylotriose (X3). The hydrolytic activity of GH10-N86Q was increased approximately 1.25-fold using beechwood xylan as a substrate and had high affinity for the substrate with a low K_m of about 1.85 mg·mL⁻¹. Otherwise, there were no significant differences in enzymatic properties between GH10-N86Q and GH10-xyn. These mutants offer great potential for modification of xylanase with desired XOS hydrolysis.

Experimental evidence for a 9-binding subsite of Bacillus licheniformis thermostable α-amylase

The action pattern of Bacillus licheniformis thermostable α-amylase (BLA) was analyzed using a series of (14)C-labeled and non-labeled maltooligosaccharides from maltose (G2) to maltododecaose (G12). Maltononaose (G9) was the preferred substrate, and yielded the smallest Km=0.36 mM, the highest kcat=12.86 s(-1), and a kcat/Km value of 35.72 s(-1) mM(-1), producing maltotriose (G3) and maltohexaose (G6) as the major product pair. Maltooctaose (G8) was hydrolyzed into two pairs of products: G3 and maltopentaose (G5), and G2 and G6 with cleavage frequencies of 0.45 and 0.30, respectively. Therefore, we propose a model with nine subsites: six in the terminal non-reducing end-binding site and three at the reducing end-binding site in the binding region of BLA.

Impact of an N-terminal extension on the stability and activity of the GH11 xylanase from Thermobacillus xylanilyticus

To understand structure-function relationships in the N-terminal region of GH11 xylanases, the 17 N-terminal amino acids of the GH11 xylanase from Neocallimastix patriciarum (Np-Xyn) have been grafted onto the N-terminal extremity of the untypically short GH11 xylanase from Thermobacillus xylanilyticus (Tx-Xyn), creating a hybrid enzyme denoted NTfus. The hybrid xylanase displayed properties (pH and temperature optima) similar to those of the parental enzyme, although thermostability was lowered, with the Tm value, being reduced by 5°C. Kinetic assays using oNP-Xylo-oligosaccharides (DP2 and 3) indicated that the N-extension did not procure more extensive substrate binding, even when further mutagenesis was performed to promote this. However, these experiments confirmed weak subsite -3 for both NTfus and the parental enzyme. The catalytic efficiency of NTfus was shown to be 17% higher than that of the parental enzyme on low viscosity wheat arabinoxylan and trials using milled wheat straw as the substrate revealed that NTfus released more substituted oligosaccharide products (Xyl/Ara=8.97±0.13 compared to Xyl/Ara=9.70±0.21 for the parental enzyme), suggesting that the hybrid enzyme possesses wider substrate selectivity. Combining either the parental enzyme or NTfus with the cellulolytic cocktail Accellerase 1500 boosted the impact of the latter on wheat straw, procuring yields of solubilized xylose and glucose of 23 and 24% of theoretical yield, respectively, thus underlining the benefits of added xylanase activity when using this cellulase cocktail. Overall, in view of the results obtained for NTfus, we propose that the N-terminal extension leads to the modification of a putative secondary substrate binding site, a hypothesis that is highly consistent with previous data.

Xylanase XYN IV from Trichoderma reesei showing exo- and endo-xylanase activity

A minor xylanase, named XYN IV, was purified from the cellulolytic system of the fungus Trichoderma reesei Rut C30. The enzyme was discovered on the basis of its ability to attack aldotetraohexenuronic acid (HexA-2Xyl-4Xyl-4Xyl, HexA(3)Xyl(3)), releasing the reducing-end xylose residue. XYN IV exhibited catalytic properties incompatible with previously described endo-β-1,4-xylanases of this fungus, XYN I, XYN II and XYN III, and the xylan-hydrolyzing endo-β-1,4-glucanase EG I. XYN IV was able to degrade several different β-1,4-xylans, but was inactive on β-1,4-mannans and β-1,4-glucans. It showed both exo-and endo-xylanase activity. Rhodymenan, a linear soluble β-1,3-β-1,4-xylan, was as the best substrate. Linear xylooligosaccharides were attacked exclusively at the first glycosidic linkage from the reducing end. The gene xyn4, encoding XYN IV, was also isolated. It showed clear homology with xylanases classified in glycoside hydrolase family 30, which also includes glucanases and mannanases. The xyn4 gene was expressed slightly when grown on xylose and xylitol, clearly on arabinose, arabitol, sophorose, xylobiose, xylan and cellulose, but not on glucose or sorbitol, resembling induction of other xylanolytic enzymes from T. reesei. A recombinant enzyme prepared in a Pichia pastoris expression system exhibited identical catalytic properties to the enzyme isolated from the T. reesei culture medium. The physiological role of this unique enzyme remains unknown, but it may involve liberation of xylose from the reducing end of branched oligosaccharides that are resistant toward β-xylosidase and other types of endoxylanases. In terms of its catalytic properties, XYN IV differs from bacterial GH family 30 glucuronoxylanases that recognize 4-O-methyl-D-glucuronic acid (MeGlcA) substituents as substrate specificity determinants.

Synthetic studies of bi-fluorescence-labeled maltooligosaccharides as substrates for α-amylase on the basis of fluorescence resonance energy transfer (FRET)

A series of bi-fluorescence-labeled maltooligosaccharides that lead to fluorescence resonance energy transfer (FRET) was systematically synthesized. Effective FRETs were observed with all of the synthesized probes. Digestion of probes having tetra-, quintet-, hexa- or hepta-saccharidic chain lengths with human saliva α-amylase resulted in disappearance of FRET when an excitation wavelength of at 290nm was used followed by detection at ca. 520nm due to emission from the dansyl moiety. However, continuous FRET was observed when probes having di- or trisaccharidic chain lengths were used as substrates. In addition to the substrate characteristics based on saccharidic chain length, the reaction rates of digestion for the substrates by amylase were different and also depended on their saccharidic chain length.

GH11 xylanases: Structure/function/properties relationships and applications

For technical, environmental and economical reasons, industrial demands for process-fitted enzymes have evolved drastically in the last decade. Therefore, continuous efforts are made in order to get insights into enzyme structure/function relationships to create improved biocatalysts. Xylanases are hemicellulolytic enzymes, which are responsible for the degradation of the heteroxylans constituting the lignocellulosic plant cell wall. Due to their variety, xylanases have been classified in glycoside hydrolase families GH5, GH8, GH10, GH11, GH30 and GH43 in the CAZy database. In this review, we focus on GH11 family, which is one of the best characterized GH families with bacterial and fungal members considered as true xylanases compared to the other families because of their high substrate specificity. Based on an exhaustive analysis of the sequences and 3D structures available so far, in relation with biochemical properties, we assess biochemical aspects of GH11 xylanases: structure, catalytic machinery, focus on their "thumb" loop of major importance in catalytic efficiency and substrate selectivity, inhibition, stability to pH and temperature. GH11 xylanases have for a long time been used as biotechnological tools in various industrial applications and represent in addition promising candidates for future other uses.

Mass spectrometric analysis using ruthenium (II)-labeling for identification of glycosyl hydrolase product

Analysis of products digested by glycosyl hydrolases helps understanding of the hydrolysis mechanism and the substrate recognition in the enzymes. We developed a new universal technique, which consists of ruthenium (II) complex labeling and mass spectrometry analysis, to identify the reducing sugars released from oligosaccharides by enzymatic digestion. This method was applied to enzymatic digestion by chitinase and cellulase of the hyperthermophilic archaea Pyrococcus fusiosus and Pyrococcus horikoshii respectively.

Some distinguishable properties between acid-stable and neutral types of alpha-amylases from acid-producing koji

The highly humid climate of Japan facilitates the growth of various molds. Among these molds, Aspergillus oryzae is the most important and popular in Japan, and has been used as yellow-koji in producing many traditional fermented beverages and foods, such as Japanese sake, and soy sauce. Taka-amylase A (TAA), a major enzyme produced by the mold, is well known worldwide to be a leading enzyme for industrial utilization and academic study, since many extensive studies have been carried out with TAA. In southern Kyushu, the other koji's of citric acid-producing molds have often been used, such as in the production of a traditional distilled liquor of shochu. The koji molds black-koji and white-koji produce two types of alpha-amylase, namely, acid-stable (AA) and common neutral (NA). The latter enzyme is enzymatically and genetically similar to TAA. In this review, we investigate AA from three molds, Aspergillus niger, A. kawachii and A. awamori, and the yeast Cryptococcus sp. regarding the distinguishable properties between AA and NA. (i) The N-terminus amino acid sequences of AA determined by molecular cloning started with the sequence of L-S-A-, whereas those of NA started with A-T-P-. (ii) Most of the full sequences of AA were composed of, besides a core catalytic domain, an extra domain of a hinge region and a carbohydrate binding domain, which could be responsible for raw-starch-digestibility. The AA from A. niger has no exceptionally extra domain, similarly to NA. (iii) Simple methods for distinguishing AA from NA using CNP-alpha-G3 and G5 as substrates were developed by our group. (iv) The number of subsite in AA on the basis of its cleavage pattern of maltooligosaccharides was estimated to be five, which differs from that of TAA, 7-9. AA has many advantages in industrial applications, such as its acid-stability, thermostability, and raw-starch digesting properties.

Molecular cloning and biochemical characterization of the first archaeal maltogenic amylase from the hyperthermophilic archaeon Thermoplasma volcanium GSS1

Maltogenic amylases (MAases), a subclass of cyclodextrin (CD)-hydrolyzing enzymes belonging to glycoside hydrolase family 13, have been studied extensively, but their physiological roles in microbes and evolutionary relationships with other amylolytic enzymes remain unclear. Here, we report the biochemical properties of a thermostable archaeal MAase from Thermoplasma volcanium GSS1 (TpMA) for the first time. The primary structure and catalytic properties of TpMA were similar to those of MAases, such as possession of an extra domain at its N-terminal and preference for CD over starch. TpMA showed high thermostability and optimal activity at 75 degrees C and 80 degrees C for beta-CD and soluble starch, respectively. The recombinant TpMA exists as a high oligomer in a solution and the oligomeric TpMA was dissociated into dimer and monomer mixture by a high concentration of NaCl. The substrate preference and thermostability of TpMA were significantly dependent on the oligomeric state of the enzyme. However, TpMA exhibited distinguishable characteristics from those of bacterial MAases. The transglycosylation pattern of TpMA was opposite to that of bacterial MAases. TpMA formed more alpha-1,4-glycosidic linked transfer product than alpha-1,6-linked products. Like as alpha-amylases, notably, TpMA has a longer subsite structure than those of other CD-degrading enzymes. Our findings in this study suggest that TpMA, the archaeal MAase, shares characteristics of both bacterial MAases and alpha-amylases, and locates in the middle of the evolutionary process between alpha-amylases and bacterial MAases.

On the simulation of enzymatic digest patterns: The fragmentation of oligomeric and polymeric galacturonides by endo-polygalacturonase II

A simulation methodology for predicting the time-course of enzymatic digestions is described. The model is based solely on the enzyme's subsite architecture and concomitant binding energies. This allows subsite binding energies to be used to predict the evolution of the relative amounts of different products during the digestion of arbitrary mixtures of oligomeric or polymeric substrates. The methodology has been specifically demonstrated by studying the fragmentation of a population of oligogalacturonides of varying degrees of polymerization, when digested by endo-polygalacturonase II (endo-PG II) from Aspergillus niger.

Mapping of barley α-amylases and outer subsite mutants reveals dynamic high-affinity subsites and barriers in the long substrate binding cleft

Subsite affinity maps of long substrate binding clefts in barley alpha-amylases, obtained using a series of maltooligosaccharides of degree of polymerization of 3-12, revealed unfavorable binding energies at the internal subsites -3 and -5 and at subsites -8 and +3/+4 defining these subsites as binding barriers. Barley alpha-amylase 1 mutants Y105A and T212Y at subsite -6 and +4 resulted in release or anchoring of bound substrate, thus modifying the affinities of other high-affinity subsites (-2 and +2) and barriers. The double mutant Y105A-T212Y displayed a hybrid subsite affinity profile, converting barriers to binding areas. These findings highlight the dynamic binding energy distribution and the versatility of long maltooligosaccharide derivatives in mapping extended binding clefts in alpha-amylases.

The mechanism of action of alpha-amylase from Lactobacillus fermentum on maltooligosaccharides

The action pattern of Lactobacillus fermentum alpha-amylase (FERMENTA) was examined using a series of maltooligosaccharides (G2-G7) as substrates. Structurally, this enzyme has a molecular mass (106 kDa) almost twofold higher than alpha-amylases from mammalians and cereals. The product pattern was investigated through an analysis of products and substrates using HPAEC with pulsed amperometric detection. FERMENTA was consistent with an endo-type of amylase. The bond cleavage frequencies were studied using maltooligosaccharides of various chain lengths as substrate, i.e. maltose up to maltoheptaose and DP 4900-amylose catalyzed by FERMENTA. The catalytic efficiency (k(cat)/K(m)) increased with chain length from maltose (8.7 x 10(4) M(-1) s(-1)) up to amylose (1 x10(9) M(-1) s(-1)). These action pattern results revealed that FERMENTA can readily cleave the third linkage from the reducing end of the maltooligosaccharides (G5-G7).

A family 10 Thermoascus aurantiacus xylanase utilizes arabinose decorations of xylan as significant substrate specificity determinants

Xylan, which is a key component of the plant cell wall, consists of a backbone of beta-1,4-linked xylose residues that are decorated with arabinofuranose, acetyl, 4-O-methyl d-glucuronic acid and ferulate. The backbone of xylan is hydrolysed by endo-beta1,4-xylanases (xylanases); however, it is unclear whether the various side-chains of the polysaccharide are utilized by these enzymes as significant substrate specificity determinants. To address this question we have determined the crystal structure of a family 10 xylanase from Thermoascus aurantiacus, in complex with xylobiose containing an arabinofuranosyl-ferulate side-chain. We show that the distal glycone subsite of the enzyme makes extensive direct and indirect interactions with the arabinose side-chain, while the ferulate moiety is solvent-exposed. Consistent with the 3D structural data, the xylanase displays fourfold more activity against xylotriose in which the non-reducing moiety is linked to an arabinose side-chain, compared to the undecorated form of the oligosacchairde. These data indicate that the sugar decorations of xylans in the T.aurantiacus family 10 xylanase, rather than simply being accommodated, can be significant substrate specificity determinants.

Mutagenesis of Ala290, which modulates substrate subsite affinity at the catalytic interface of dimeric ThMA

The goal of this study was to develop a maltose-producing enzyme using protein engineering and to clarify the relation between the substrate specificity and the structure of the substrate-binding site of dimeric maltogenic amylase isolated from Thermus (ThMA). Ala290 at the interface of ThMA dimer in the vicinity of the substrate-binding site was substituted with isoleucine, which may cause a structural change due to its bulky side chain. TLC analysis of the action pattern of the mutant ThMA-A290I, using maltooligosaccharides as substrates, revealed that ThMA-A290I used maltotetraose to produce mostly maltose, while wild-type ThMA produced glucose as well as maltose. The wild-type enzyme eventually hydrolyzed the maltose produced from maltotetraose into glucose, but the mutant enzyme did not. For both enzymes, the cleavage frequency of the glycosidic bond of maltooligosaccharides was the highest at the second bond from the reducing end. The mutant ThMA had a much higher Km value for maltose than the wild-type ThMA. The kinetic parameter, kcat/Km) of ThMA-A290I for maltose was 48 times less than that of wild-type ThMA, suggesting that the subsite affinity and hydrolysis mode of ThMA were modulated by the residue located at the interface of ThMA dimer near the active site. The conformational rearrangement in the catalytic interface probably led to the change in the substrate binding affinity of the mutant ThMA. Our results provide basic information for the enzymatic preparation of high-maltose syrup.

Tailored catalysts for plant cell-wall degradation: redesigning the exo/endo preference of Cellvibrio japonicus arabinanase 43A

Enzymes acting on polymeric substrates are frequently classified as exo or endo, reflecting their preference for, or ignorance of, polymer chain ends. Most biotechnological applications, especially in the field of polysaccharide degradation, require either endo- or exo-acting hydrolases, or they harness the essential synergy between these two modes of action. Here, we have used genomic data in tandem with structure to modify, radically, the chain-end specificity of the Cellvibrio japonicus exo-arabinanase CjArb43A. The structure of Bacillus subtilis endo-arabinanase 43A (BsArb43A) in harness with chain-end recognition kinetics of CjArb43A directed a rational design approach that led to the conversion of the Cellvibrio enzyme from an exo to an endo mode of action. One of the exo-acting mutants, D35L/Q316A, displays similar activity to WT CjArb43A and the removal of the steric block mediated by the side chains of Gln-316 and Asp-53 at the -3 subsite confers its capacity to attack internal glycoside bonds. This study provides a template for the production of tailored industrial catalysts. The introduction of subtle changes informed by comparative 3D structural and genomic data can lead to fundamental changes in the mode of action of these enzymes.

Beta-glucosidase, exo-beta-glucanase and pyridoxine transglucosylase activities of rice BGlu1

The bglu1 cDNA for a beta-glucosidase cloned from rice (Oryza sativa L.) seedlings was expressed as a soluble and active protein in Escherichia coli and designated BGlu1. This enzyme hydrolysed beta-1,4-linked oligosaccharides with increasing catalytic efficiency (kcat/Km) values as the DP (degree of polymerization) increased from 2 to 6. In contrast, hydrolysis of beta-1,3-linked oligosaccharides decreased from DP 2 to 3, and polymers with a DP greater than 3 were not hydrolysed. The enzyme also hydrolysed p -nitrophenyl beta-D-glycosides and some natural glucosides but with lower catalytic efficiency than beta-linked oligosaccharides. Pyridoxine 5'-O-beta-D-glucoside was the most efficiently hydrolysed natural glycoside tested. BGlu1 also had high transglucosylation activity towards pyridoxine, producing pyridoxine 5'-O-beta-D-glucopyranoside in the presence of the glucose donor p-nitrophenyl beta-D-glucoside.

Insights into the Molecular Determinants of Substrate Specificity in Glycoside Hydrolase Family 5 Revealed by the Crystal Structure and Kinetics of Cellvibrio mixtus Mannosidase 5A

The enzymatic hydrolysis of the glycosidic bond is central to numerous biological processes. Glycoside hydrolases, which catalyze these reactions, are grouped into families based on primary sequence similarities. One of the largest glycoside hydrolase families is glycoside hydrolase family 5 (GH5), which contains primarily endo-acting enzymes that hydrolyze beta-mannans and beta-glucans. Here we report the cloning, characterization, and three-dimensional structure of the Cellvibrio mixtus GH5 beta-mannosidase (CmMan5A). This enzyme releases mannose from the nonreducing end of mannooligosaccharides and polysaccharides, an activity not previously observed in this enzyme family. CmMan5A contains a single glycone (-1) and two aglycone (+1 and +2) sugar-binding subsites. The -1 subsite displays absolute specificity for mannose, whereas the +1 subsite does not accommodate galactosyl side chains but will bind weakly to glucose. The +2 subsite is able to bind to decorated mannose residues. CmMan5A displays similar activity against crystalline and amorphous mannans, a property rarely attributed to glycoside hydrolases. The 1.5 A crystal structure reveals that CmMan5A adopts a (beta/alpha)(8) barrel fold, and superimposition with GH5 endo-mannanases shows that dramatic differences in the length of three loops modify the active center accessibility and thus modulate the specificity from endo to exo. The most striking and significant difference is the extended loop between strand beta8 and helix alpha8 comprising residues 378-412. This insertion forms a "double" steric barrier, formed by two short beta-strands that function to "block" the substrate binding cleft at the edge of the -1 subsite forming the "exo" active center topology of CmMan5A.

Structure and function of a family 10 beta-xylanase chimera of Streptomyces olivaceoviridis E-86 FXYN and Cellulomonas fimi Cex

The catalytic domain of xylanases belonging to glycoside hydrolase family 10 (GH10) can be divided into 22 modules (M1 to M22; Sato, Y., Niimura, Y., Yura, K., and Go, M. (1999) Gene (Amst.) 238, 93-101). Inspection of the crystal structure of a GH10 xylanase from Streptomyces olivaceoviridis E-86 (SoXyn10A) revealed that the catalytic domain of GH10 xylanases can be dissected into two parts, an N-terminal larger region and C-terminal smaller region, by the substrate binding cleft, corresponding to the module border between M14 and M15. It has been suggested that the topology of the substrate binding clefts of GH10 xylanases are not conserved (Charnock, S. J., Spurway, T. D., Xie, H., Beylot, M. H., Virden, R., Warren, R. A. J., Hazlewood, G. P., and Gilbert, H. J. (1998) J. Biol. Chem. 273, 32187-32199). To facilitate a greater understanding of the structure-function relationship of the substrate binding cleft of GH10 xylanases, a chimeric xylanase between SoXyn10A and Xyn10A from Cellulomonas fimi (CfXyn10A) was constructed, and the topology of the hybrid substrate binding cleft established. At the three-dimensional level, SoXyn10A and CfXyn10A appear to possess 5 subsites, with the amino acid residues comprising subsites -3 to +1 being well conserved, although the +2 subsites are quite different. Biochemical analyses of the chimeric enzyme along with SoXyn10A and CfXyn10A indicated that differences in the structure of subsite +2 influence bond cleavage frequencies and the catalytic efficiency of xylooligosaccharide hydrolysis. The hybrid enzyme constructed in this study displays fascinating biochemistry, with an interesting combination of properties from the parent enzymes, resulting in a low production of xylose.

Tyrosine 105 and Threonine 212 at Outermost Substrate Binding Subsites –6 and +4 Control Substrate Specificity, Oligosaccharide Cleavage Patterns, and Multiple Binding Modes of Barley α-Amylase 1

The role in activity of outer regions in the substrate binding cleft in alpha-amylases is illustrated by mutational analysis of Tyr(105) and Thr(212) localized at subsites -6 and +4 (substrate cleavage occurs between subsites -1 and +1) in barley alpha-amylase 1 (AMY1). Tyr(105) is conserved in plant alpha-amylases whereas Thr(212) varies in these and related enzymes. Compared with wild-type AMY1, the subsite -6 mutant Y105A has 140, 15, and <1% activity (k(cat)/K(m)) on starch, amylose DP17, and 2-chloro-4-nitrophenyl beta-d-maltoheptaoside, whereas T212Y at subsite +4 has 32, 370, and 90% activity, respectively. Thus engineering of aromatic stacking interactions at the ends of the 10-subsite long binding cleft affects activity very differently, dependent on the substrate. Y105A dominates in dual subsite -6/+4 [Y105A/T212(Y/W)]AMY1 mutants having almost retained and low activity on starch and oligosaccharides, respectively. Bond cleavage analysis of oligosaccharide degradation by wild-type and mutant AMY1 supports that Tyr(105) is critical for binding at subsite -6. Substrate binding is improved by T212(Y/W) introduced at subsite +4 and the [Y105A/T212(Y/W)]AMY1 double mutants synergistically enhanced productive binding of the substrate aglycone. The enzymatic properties of the series of AMY1 mutants suggest that longer substrates adopt several binding modes. This is in excellent agreement with computed distinct multiple docking solutions observed for maltododecaose at outer binding areas of AMY1 beyond subsites -3 and +3.

Structural and biochemical analysis of Cellvibrio japonicus xylanase 10C: how variation in substrate-binding cleft influences the catalytic profile of family GH-10 xylanases

Microbial degradation of the plant cell wall is the primary mechanism by which carbon is utilized in the biosphere. The hydrolysis of xylan, by endo-beta-1,4-xylanases (xylanases), is one of the key reactions in this process. Although amino acid sequence variations are evident in the substrate binding cleft of "family GH10" xylanases (see afmb.cnrs-mrs.fr/CAZY/), their biochemical significance is unclear. The Cellvibrio japonicus GH10 xylanase CjXyn10C is a bi-modular enzyme comprising a GH10 catalytic module and a family 15 carbohydrate-binding module. The three-dimensional structure at 1.85 A, presented here, shows that the sequence joining the two modules is disordered, confirming that linker sequences in modular glycoside hydrolases are highly flexible. CjXyn10C hydrolyzes xylan at a rate similar to other previously described GH10 enzymes but displays very low activity against xylooligosaccharides. The poor activity on short substrates reflects weak binding at the -2 subsite of the enzyme. Comparison of CjXyn10C with other family GH10 enzymes reveals "polymorphisms" in the substrate binding cleft including a glutamate/glycine substitution at the -2 subsite and a tyrosine insertion in the -2/-3 glycone region of the substrate binding cleft, both of which contribute to the unusual properties of the enzyme. The CjXyn10C-substrate complex shows that Tyr-340 stacks against the xylose residue located at the -3 subsite, and the properties of Y340A support the view that this tyrosine plays a pivotal role in substrate binding at this location. The generic importance of using CjXyn10C as a template in predicting the biochemical properties of GH10 xylanases is discussed.

The mechanisms by which family 10 glycoside hydrolases bind decorated substrates

Endo-beta-1,4-xylanases (xylanases), which cleave beta-1,4 glycosidic bonds in the xylan backbone, are important components of the repertoire of enzymes that catalyze plant cell wall degradation. The mechanism by which these enzymes are able to hydrolyze a range of decorated xylans remains unclear. Here we reveal the three-dimensional structure, determined by x-ray crystallography, and the catalytic properties of the Cellvibrio mixtus enzyme Xyn10B (CmXyn10B), the most active GH10 xylanase described to date. The crystal structure of the enzyme in complex with xylopentaose reveals that at the +1 subsite the xylose moiety is sandwiched between hydrophobic residues, which is likely to mediate tighter binding than in other GH10 xylanases. The crystal structure of the xylanase in complex with a range of decorated xylooligosaccharides reveals how this enzyme is able to hydrolyze substituted xylan. Solvent exposure of the O-2 groups of xylose at the +4, +3, +1, and -3 subsites may allow accommodation of the alpha-1,2-linked 4-O-methyl-d-glucuronic acid side chain in glucuronoxylan at these locations. Furthermore, the uronic acid makes hydrogen bonds and hydrophobic interactions with the enzyme at the +1 subsite, indicating that the sugar decorations in glucuronoxylan are targeted to this proximal aglycone binding site. Accommodation of 3'-linked l-arabinofuranoside decorations is observed in the -2 subsite and could, most likely, be tolerated when bound to xylosides in -3 and +4. A notable feature of the binding mode of decorated substrates is the way in which the subsite specificities are tailored both to prevent the formation of "dead-end" reaction products and to facilitate synergy with the xylan degradation-accessory enzymes such as alpha-glucuronidase. The data described in this report and in the accompanying paper indicate that the complementarity in the binding of decorated substrates between the glycone and aglycone regions appears to be a conserved feature of GH10 xylanases.

Study of the inhibition of four alpha amylases by acarbose and its 4IV-α-maltohexaosyl and 4IV-α-maltododecaosyl analogues

Acarbose analogues, 4IV-maltohexaosyl acarbose (G6-Aca) and 4IV-maltododecaosyl acarbose (G12-Aca), were prepared by the reaction of cyclomaltodextrin glucanyltransferase with cyclomaltohexaose and acarbose. The inhibition kinetics of acarbose and the two acarbose analogues were studied for four different alpha-amylases: Aspergillus oryzae, Bacillus amyloliquefaciens, human salivary, and porcine pancreatic alpha-amylases. The three inhibitors showed mixed, noncompetitive inhibition, for all four alpha-amylases. The acarbose inhibition constants, Ki, for the four alpha-amylases were 270, 13, 1.27, and 0.80 microM, respectively; the Ki values for G6-Aca were 33, 37, 14, and 7 nM, respectively; and the G12-Aca Ki constants were 59, 81, 18, and 11 nM, respectively. The G6-Aca and G12-Aca analogues are the most potent alpha-amylase inhibitors observed, with Ki values one to three orders of magnitude more potent than acarbose, which itself was one to three orders of magnitude more potent than other known alpha-amylase inhibitors.

Subsite structure of the endo-type chitin deacetylase from a deuteromycete, Colletotrichum lindemuthianum: an investigation using steady-state kinetic analysis and MS

The endo-type chitin deacetylase (EC 3.5.1.41) from a deuteromycete, Colletotrichum lindemuthianum (ATCC 56676), catalyses the hydrolysis of the acetamido group of GlcNAc (2-acetamido-2-deoxy-D-glucose) residues in chitin or chito-oligosaccharides with a degree of polymerization (n) equal to or greater than 2. The steady-state kinetic parameters for the initial deacetylation reactions of (GlcNAc)(2-6) were determined using a direct, continuous spectrophotometric assay in combination with ESI-MS (electrospray ionization MS) analysis of the products. The dependence of the observed K(m) and k(cat)/K(m) on n suggests the presence of four enzyme subsites (-2, -1, 0 and +1) that interact with GlcNAc residues from the non-reducing end to the reducing end of the substrate. The turnover number (k (cat), 7 s(-1)) is independent of n and represents the intrinsic rate constant (k(int)) for the hydrolysis of the acetamido group in subsite 0. The subsite affinities for the GlcNAc residues were calculated from the observed k(cat)/K(m) values (A (-2), -11.0; A (-1), -1.5; A (0), -7.7; A (+1), -12.5 kJ x mol(-1)). The increments in the subsite affinities due to the recognition of the acetamido groups were calculated [DeltaDelta G ((N-acetyl))=3.3, 0, 4.0 and 0 kJ x mol(-1) for subsites -2, -1, 0 and +1 respectively]. The steady-state kinetic parameters for the second deacetylation reaction of (GlcNAc)(4) were also determined using (GlcNAcGlcNAcGlcNGlcNAc) as the substrate. The comparison of the experimental and theoretical values (calculated using the subsite affinities) suggests that the mono-deacetylated substrate binds strongly in a non-productive mode occupying all four subsites, thereby inhibiting the second deacetylation reaction.

Biochemical and catalytic properties of an endoxylanase purified from the culture filtrate of Sporotrichum thermophile

An endo-beta-1,4-xylanase (1,4-beta-D-xylan xylanoxydrolase, EC 3.2.1.8) present in culture filtrates of Sporotrichum thermophile ATCC 34628 was purified to homogeneity by Q-Sepharose and Sephacryl S-200 column chromatographies. The enzyme has a molecular mass of 25,000 Da, an isoelectric point of 6.7, and is optimally active at pH 5 and at 70 degrees C. Thin-layer chromatography (TLC) analysis showed that endo-xylanase liberates mainly xylose (Xyl) and xylobiose (Xyl2) from beechwood 4-O-methyl-D-glucuronoxylan, O-acetyl-4-O-methylglucuronoxylan and rhodymenan (a beta-(1-->4)-beta(1-->3)-xylan). Also, the enzyme releases an acidic xylo-oligosaccharide from 4-O-methyl-D-glucuronoxylan, and an isomeric xylotetraose and an isomeric xylopentaose from rhodymenan. Analysis of reaction mixtures by high performance liquid chromatography (HPLC) revealed that the enzyme cleaves preferentially the internal glycosidic bonds of xylooligosaccharides, [1-3H]-xylooligosaccharides and xylan. The enzyme also hydrolyses the 4-methylumbelliferyl glycosides of beta-xylobiose and beta-xylotriose at the second glycosidic bond adjacent to the aglycon. The endoxylanase is not active on pNPX and pNPC. The enzyme mediates a decrease in the viscosity of xylan associated with a release of only small amounts of reducing sugar. The enzyme is irreversibly inhibited by series of omega-epoxyalkyl glycosides of D-xylopyranose. The results suggest that the endoxylanase from S. thermophile has catalytic properties similar to the enzymes belonging to family 11.

Subsite mapping of human salivary alpha-amylase and the mutant Y151M

This study characterizes the substrate-binding sites of human salivary alpha-amylase (HSA) and its Y151M mutant. It describes the first subsite maps, namely, the number of subsites, the position of cleavage sites and apparent subsite energies. The product pattern and cleavage frequencies were determined by high-performance liquid chromatography, utilizing a homologous series of chromophore-substituted maltooligosaccharides of degree of polymerization 3-10 as model substrates. The binding region of HSA is composed of four glycone and three aglycone-binding sites, while that of Tyr151Met is composed of four glycone and two aglycone-binding sites. The subsite maps show that Y151M has strikingly decreased binding energy at subsite (+2), where the mutation has occurred (-2.6 kJ/mol), compared to the binding energy at subsite (+2) of HSA (-12.0 kJ/mol).

Barley alpha-amylase Met53 situated at the high-affinity subsite -2 belongs to a substrate binding motif in the beta-->alpha loop 2 of the catalytic (beta/alpha)8-barrel and is critical for activity and substrate specificity

Met53 in barley alpha-amylase 1 (AMY1) is situated at the high-affinity subsite -2. While Met53 is unique to plant alpha-amylases, the adjacent Tyr52 stacks onto substrate at subsite -1 and is essentially invariant in glycoside hydrolase family 13. These residues belong to a short sequence motif in beta-->alpha loop 2 of the catalytic (beta/alpha)8-barrel and site-directed mutagenesis was used to introduce a representative variety of structural changes, Met53Glu/Ala/Ser/Gly/Asp/Tyr/Trp, to investigate the role of Met53. Compared to wild-type, Met53Glu/Asp AMY1 displayed 117/90% activity towards insoluble Blue Starch, and Met53Ala/Ser/Gly 76/58/38%, but Met53Tyr/Trp only 0.9/0.1%, even though both Asp and Trp occur frequently at this position in family 13. Towards amylose DP17 (degree of polymerization = 17) and 2-chloro-4-nitrophenyl beta-d-maltoheptaoside the activity (kcat/Km) of all mutants was reduced to 5.5-0.01 and 1.7-0.02% of wild-type, respectively. Km increased up to 20-fold for these soluble substrates and the attack on glucosidic linkages in 4-nitrophenyl alpha-d-maltohexaoside (PNPG6) and PNPG5 was determined by action pattern analysis to shift to be closer to the nonreducing end. This indicated that side chain replacement at subsite -2 weakened substrate glycon moiety contacts. Thus whereas all mutants produced mainly PNPG2 from PNPG6 and similar amounts of PNPG2 and PNPG3 accounting for 85% of the products from PNPG5, wild-type released 4-nitrophenol from PNPG6 and PNPG and PNPG2 in equal amounts from PNPG5. Met53Trp affected the action pattern on PNPG7, which was highly unusual for AMY1 subsite mutants. It was also the sole mutant to catalyze substantial transglycosylation - promoted probably by slow substrate hydrolysis - to produce up to maltoundecaose from PNPG6.

Subsite mapping of the binding region of alpha-amylases with a computer program

A computer program has been evaluated for subsite map calculations of depolymerases. The program runs in windows and uses the experimentally determined bond cleavage frequencies (BCFs) for determination of the number of subsites, the position of the catalytic site and for calculation of subsite binding energies. The apparent free energy values were optimized by minimization of the differences of the measured and calculated BCF data. The program called suma (SUbsite Mapping of alpha-Amylases) is freely available for research and educational purposes via the Internet (E-mail: gyemant@tigris.klte.hu). The advantages of this program are demonstrated through alpha-amylases of different origin, e.g. porcine pancreatic alpha-amylase (PPA) studied in our laboratory, in addition to barley and rice alpha-amylases published in the literature. Results confirm the popular 'five subsite model' for PPA with three glycone and two aglycone binding sites. Calculations for barley alpha-amylase justify the '6 + 2 + (1) model' prediction. The binding area of barley alpha-amylase is composed of six glycone, two aglycone binding sites followed by a barrier subsite at the reducing end of the binding site. Calculations for rice alpha-amylase represent an entirely new map with a '(1) + 2 + 5 model', where '(1)' is a barrier subsite at the nonreducing end of the binding site and there are two glycone and five aglycone binding sites. The rice model may be reminiscent of the action of the bacterial maltogenic amylase, that is, suggesting an exo-mechanism for this enzyme.

Biochemical characterization and mode of action of a thermostable endoglucanase purified from Thermoascus aurantiacus

A major extracellular endoglucanase purified to homogeneity from Thermoascus aurantiacus had a M(r) of 34 kDa and a pI of 3.7 and was optimally active at 70-80 degrees C and pH 4.0-4.4. It was stable at pH 2.8-6.8 at 50 degrees C for 48 h and maintained its secondary structure and folded conformation up to 70 degrees C at pH 5.0 and 2.8, respectively. A 33-amino acid sequence at the N terminus showed considerable homology with 14 microbial endoglucanases having highly conserved 8 amino acids (positions 10-17) and Gly, Pro, Gly, and Pro at positions 8, 22, 23, and 32, respectively. The enzyme is rich in Asp (15%) and Glu (10%) with a carbohydrate content of 2.7%. Polyclonal antibodies of endoglucanase cross-reacted with their own antigen and with other purified cellulases from T. aurantiacus. The endoglucanase was specific for polymeric substrates with highest activity toward carboxymethyl cellulose followed by barley beta-glucan and lichenan. It preferentially cleaved the internal glycosidic bonds of Glc(n) and MeUmbGlc(n) and possessed an extended substrate-binding site with five subsites. The data indicate that the endoglucanase from T. aurantiacus is a member of glycoside hydrolase family 5.

Relationship of sequence and structure to specificity in the alpha-amylase family of enzymes

The hydrolases and transferases that constitute the alpha-amylase family are multidomain proteins, but each has a catalytic domain in the form of a (beta/alpha)(8)-barrel, with the active site being at the C-terminal end of the barrel beta-strands. Although the enzymes are believed to share the same catalytic acids and a common mechanism of action, they have been assigned to three separate families - 13, 70 and 77 - in the classification scheme for glycoside hydrolases and transferases that is based on amino acid sequence similarities. Each enzyme has one glutamic acid and two aspartic acid residues necessary for activity, while most enzymes of the family also contain two histidine residues critical for transition state stabilisation. These five residues occur in four short sequences conserved throughout the family, and within such sequences some key amino acid residues are related to enzyme specificity. A table is given showing motifs distinctive for each specificity as extracted from 316 sequences, which should aid in identifying the enzyme from primary structure information. Where appropriate, existing problems with identification of some enzymes of the family are pointed out. For enzymes of known three-dimensional structure, action is discussed in terms of molecular architecture. The sequence-specificity and structure-specificity relationships described may provide useful pointers for rational protein engineering.

Novel substrate specificity of a membrane-bound beta-glycosidase from the hyperthermophilic archaeon Pyrococcus horikoshii

A beta-glycosidase gene homolog of Pyrococcus horikoshii (BGPh) was successfully expressed in Escherichia coli. The enzyme was localized in a membrane fraction and solubilized with 2.5% Triton X-100 at 85 degrees C for 15 min. The optimum pH was 6.0 and the optimum temperature was over 100 degrees C, respectively. BGPh stability was dependent on the presence of Triton X-100, the enzyme's half-life at 90 degrees C (pH 6.0) was 15 h. BGPh has a novel substrate specificity with k(cat)/K(m) values high enough for hydrolysis of beta-D-Glcp derivatives with long alkyl chain at the reducing end and low enough for the hydrolysis of beta-linked glucose dimer more hydrophilic than aryl- or alkyl-beta-D-Glcp.

Kinetics and inhibition of cyclomaltodextrinase from alkalophilic Bacillus sp. I-5

The cyclomaltodextrinase from alkalophilic Bacillus sp. I-5 (CDase I-5) was expressed in Escherichia coli and the purified enzyme was used for characterization of the enzyme action. The hydrolysis products were monitored by both HPLC and high-performance ion chromatography analysis that enable the kinetic analysis of the cyclomaltodextrin (CD)-degrading reaction. Analysis of the kinetics of cyclomaltodextrin hydrolysis by CDase I-5 indicated that ring-opening of the cyclomaltodextrin was the major limiting step and that CDase I-5 preferentially degraded the linear maltodextrin chain by removing the maltose unit. The substrate binding affinity of the enzyme was almost same for those of cyclomaltodextrins while the rate of ring-opening was the fastest for cyclomaltoheptaose. Acarbose and methyl 6-amino-6-deoxy-alpha-d-glucopyranoside were relatively strong competitive inhibitors with K(i) values of 1.24 x 10(-3) and 8.44 x 10(-1) mM, respectively. Both inhibitors are likely to inhibit the ring-opening step of the CD degradation reaction.

Amylose chain behavior in an interacting context. III. Complete occupancy of the AMY2 barley alpha-amylase cleft and comparison with biochemical data

In the first two papers of this series, the tools necessary to evaluate substrate ring deformations were developed, and then the modeling of short amylose fragments (maltotriose and maltopentaose) inside the catalytic site of barley alpha-amylase was performed. In this third paper, this docking has been extended to the whole catalytic cleft. A systematic approach to extend the substrate was used on the reducing side from the previous enzyme/pentasaccharide complex. However, due to the lack of an obvious subsite at the nonreducing side, an alternate protocol has been chosen that incorporates biochemical information on the enzyme and features on the substrate shape as well. As a net result, ten subsites have been located consistent with the distribution of Ajandouz et al. (E. H. Ajandouz, J. Abe, B. Svensson, and G. Marchis-Mouren, Biochimica Biophysica Acta, 1992, Vol. 1159, pp. 193-202) and corresponding binding energies were estimated. Among them, two extreme subsites (-6) and (+4), with stacking residues Y104 and Y211, respectively, have strong affinities with glucose rings added to the substrate. No other deformation has been found for the new glucose rings added to the substrate; therefore, only ring A of the DP 10 fragment has a flexible form when interacting with the inner stacking residues Y51. Global conservation of the helical shape of the substrate can be postulated in spite of its significant distortion at subsite (-1).

Effect of temperature on the saccharide composition obtained after alpha-amylolysis of starch

The hydrolysis of starch to low-molecular-weight products (normally characterised by their dextrose equivalent (DE), which is directly related to the number-average molecular mass) was studied at different temperatures. Amylopectin potato starch, lacking amylose, was selected because of its low tendency towards retrogradation at lower temperatures. Bacillus licheniformis alpha-amylase was added to 10% [w/w] gelatinised starch solutions. The hydrolysis experiments were done at 50, 70, and 90 degrees C. Samples were taken at defined DE values and these were analysed with respect to their saccharide composition. At the same DE the oligosaccharide composition depended on the hydrolysis temperature. This implies that at the same net number of bonds hydrolysed by the enzyme, the saccharide composition was different. The hydrolysis temperature also influenced the initial overall molecular-weight distribution. Higher temperatures led to a more homogenous molecular weight distribution. Similar effects were observed for alpha-amylases from other microbial sources such as Bacillus amyloliquefaciens and Bacillus stearothermophilus. Varying the pH (5.1, 6.2, and 7.6) at 70 degrees C did not significantly influence the saccharide composition obtained during B. licheniformis alpha-amylase hydrolysis. The underlying mechanisms for B. licheniformis alpha-amylase were studied using pure linear oligosaccharides, ranging from maltotriose to maltoheptaose as substrates. Activation energies for the hydrolysis of individual oligosaccharides were calculated from Arrhenius plots at 60, 70, 80, and 90 degrees C. Oligosaccharides with a degree of polymerisation exceeding that of the substrate could be detected. The contribution of these oligosaccharides increased as the degree of polymerisation of the substrate decreased and the temperature of hydrolysis increased. The product specificity decreased with increasing temperature of hydrolysis, which led to a more equal distribution between the possible products formed. Calculations with the subsite map as determined for the closely related alpha-amylase from B. amyloliquefaciens reconfirmed this finding of a decreased substrate specificity with increased temperature of hydrolysis. Copyright 1999 John Wiley & Sons, Inc.

Endoglucanase V and a phosphatase from Trichoderma viride are able to act on modified exopolysaccharide from Lactococcus lactis subsp. cremoris B40

EPS B40 from Lactococcus lactis subsp. cremoris consists of a repeating unit of-->4)-beta-D-Glcp-(1-->4)-[alpha-L-Rhap-(1 -->2)][alpha-D-Galp-1-PO4-3]-beta-D-Galp-(1-->4)-beta-D-Glcp-(1-->. A phosphatase from Trichoderma viride was able to release phosphate, but only after removal of rhamnosyl and galactosyl residues by mild CF3CO2H treatment. Purified endoV from T. viride was able to act on the backbone of the polymer, but only if rhamnosyl substituents and phosphate had been removed. After complete removal of phosphate and partial removal of rhamnosyl residues by HF treatment, incubation with endoV resulted in a homologous series of oligomers. Purification of these oligomers and subsequent characterisation by NMR demonstrated that endoV was able to cleave the beta-(1-->4) linkage between two glucopyranosyl residues when the galactopyranosyl residue towards the nonreducing end is unsubstituted. The mode of action of endoV on HF-treated EPS B40 is discussed on the basis of the subsite model described for endoV [J.-P. Vincken, G. Beldman, A.G.J. Voragen, Carbohydr. Res., 298 (1997) 299-310].

Kinetic characterization of Aspergillus niger N400 endopolygalacturonases I, II and C

Endopolygalacturonases I, II and C isolated from recombinant Aspergillus niger strains were characterized with respect to pH optimum, activity on polygalacturonic acid and mode of action and kinetics on oligogalacturonates of different chain length (n = 3-7). Apparent Vmax values using polygalacturonate as a substrate at the pH optimum, pH 4.1, were calculated as 13.8 mukat.mg-1, 36.5 mukat.mg-1 and 415 nkat.mg-1 for endopolygalacturonases I, II and C, respectively. K(m) values were < 0.15 mg.mL-1 for all three enzymes. Product progression analysis using polygalacturonate as a substrate revealed a random cleavage pattern for all three enzymes and suggested processive behavior for endopolygalacturonases I and C. This result was confirmed by analysis of the mode of action using oligogalacturonates. Processivity was observed when the degree of polymerization of the substrate exceeded 5 or 6 for endopolygalacturonase I and endopolygalacturonase C, respectively. The bond-cleavage frequencies obtained for the hydrolysis of the oligogalacturonates were used to assess subsite maps. The maps indicate that the minimum number of subsites is seven for all three enzymes. Using pectins of various degrees of esterification, it was shown that endopolygalacturonase II is the most sensitive to the presence of methyl esters. Like endopolygalacturonase II, endopolygalacturonases I, C and E, which was also included in this part of the study, preferred the non-esterified pectate. Additional differences in substrate specificity were revealed by analysis of the reaction products of hydrolysis of a mixture of pectate lyase-generated delta 4,5-unsaturated oligogalacturonates of degree of polymerization 4-8. Whereas endopolygalacturonase I showed a strong preference for generating the delta 4,5-unsaturated dimer, with endopolygalacturonase II the delta 4,5-unsaturated trimer accumulated, indicating further differences in substrate specificity. For endopolygalacturonases C and E both the delta 4,5-unsaturated dimer and trimer were observed, although in different ratios.

The topology of the substrate binding clefts of glycosyl hydrolase family 10 xylanases are not conserved

The crystal structures of family 10 xylanases indicate that the distal regions of their active sites are quite different, suggesting that the topology of the substrate binding clefts of these enzymes may vary. To test this hypothesis, we have investigated the rate and pattern of xylooligosaccharide cleavage by the family 10 enzymes, Pseudomonas fluorescens subsp. cellulosa xylanase A (XYLA) and Cellulomonas fimi exoglucanase, Cex. The data showed that Cex contained three glycone and two aglycone binding sites, while XYLA had three glycone and four aglycone binding sites, supporting the view that the topologies of substrate binding clefts in family 10 glycanases are not highly conserved. The importance of residues in the substrate binding cleft of XYLA in catalysis and ligand binding were evaluated using site-directed mutagenesis. In addition to providing insight into the function of residues in the glycone region of the active site, the data showed that the aromatic residues Phe-181, Tyr-255, and Tyr-220 play important roles in binding xylose moieties, via hydrophobic interactions, at subsites +1, +3, and +4, respectively. Interestingly, the F181A mutation caused a much larger reduction in the activity of the enzyme against xylooligosaccharides compared with xylan. These data, in conjunction with a previous study (Charnock, S. J., Lakey, J. H., Virden, R., Hughes, N., Sinnott, M. L., Hazlewood, G. P., Pickersgill, R., and Gilbert, H. J. (1997) J. Biol. Chem. 272, 2942-2951), suggest that the binding of xylooligosaccharides at the -2 and +1 subsites ensures that the substrates occupy the -1 and +1 subsites and thus preferentially form productive complexes with the enzyme. Loss of ligand binding at either subsite results in small substrates forming nonproductive complexes with XYLA by binding to distal regions of the substrate binding cleft.

Mechanism of action and the substrate-dependent pH maximum shift of the alpha-amylase of Bacillus coagulans

The alpha-amylase of Bacillus coagulans is a saccharifying alpha-amylase which hydrolyses the disaccharide maltose [L. Keating, C. Kelly, and W. Fogarty, Biochem. Soc. Trans., 24 (1996) 44S]. The pH maximum for maltose hydrolysis is pH 5.0, differing from the pH maximum for starch hydrolysis which is pH 6.0. Studies using reducing end 14C-labeled maltooligosaccharides revealed a substrate-dependent pH maximum shift; hydrolysis of radiolabeled maltotriose (G3*) was maximal at pH 5.0 while the pH maximum for hydrolysis of radiolabeled maltopentaose (G5*) and maltohexaose (G6*) was pH 6.0. With maltotetraose (G4*) however, the pH maximum was pH 5.0-6.0. In addition, the bond cleavage pattern of G4* was dependent on pH. At pH 5.0, the pH maximum for maltose hydrolysis, the frequency of hydrolysis of the reducing end terminal bond of G4* was maximal. Determination of the pH maximum of the productive binding modes of the cleavage patterns of G3* to G6* illustrated the possible role of the occupation of subsite r + 2 in the pH control mechanism of B. coagulans alpha-amylase.