1
|
Tiell SM, Chennoju M, Davis BL, Owusu-Danquah J. Effects of ultrasound settings on temperature changes in NiTi implants. Med Eng Phys 2024; 123:104081. [PMID: 38365335 DOI: 10.1016/j.medengphy.2023.104081] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/30/2023] [Revised: 11/30/2023] [Accepted: 12/03/2023] [Indexed: 02/18/2024]
Abstract
BACKGROUND Shape memory alloys (SMAs) are well-known for their unique ability to undergo a shape change in response to a thermal stimulus. A frequently-used SMA for biomedical devices is NiTi, although its superelastic features tend to be emphasized more than the ability to change shape. Minimally invasive NiTi implants which can reconfigure or adjust their shape across several temperature points could provide desirable surgical outcomes. For decades, therapeutic ultrasound has been used medically as a non-invasive method for tissue thermal therapy. Ultrasound's ability to quickly raise temperatures, and transcutaneously activate shape changes in NiTi implants is a novel approach for eliciting the martensitic thermoelastic transformation. METHODS The purpose of this study was to investigate the features of therapeutic ultrasound that correspond with temperature changes in different NiTi specimens. For this purpose, ultrasound was applied to two NiTi specimens for two minutes each at varying low- and high-frequency and power settings using a Sonicator 740 and a Dynatron 150. FINDINGS The baseline temperature for all 32 trials was room temperature (23.0 ± 1.7°C). This study successfully increased the specimen temperature with the application of Sonicator 740 and Dynatron 150 therapeutic ultrasound machines (2.2 ± 2.4°C and 1.5 ± 1.15°C, respectively). From the statistical analyses of the experimental data, it was clear that there is a significant difference between low- and high-power settings on mean temperature change using the Dynatron 150 (ANCOVA; p = 0.013). Interpretation Of clinical relevance, NiTi implants can quickly and easily increase in temperature when applying therapeutic ultrasound. Ultrasound power causes temperature changes and should be accounted for when designing orthopedic implants for applications where dimensional changes are desirable.
Collapse
|
2
|
Zhang Y, Attarilar S, Wang L, Lu W, Yang J, Fu Y. A Review on Design and Mechanical Properties of Additively Manufactured NiTi Implants for Orthopedic Applications. Int J Bioprint 2021; 7:340. [PMID: 33997434 PMCID: PMC8114098 DOI: 10.18063/ijb.v7i2.340] [Citation(s) in RCA: 20] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/06/2021] [Accepted: 03/10/2021] [Indexed: 11/23/2022] Open
Abstract
NiTi alloy has a wide range of applications as a biomaterial due to its high ductility, low corrosion rate, and favorable biocompatibility. Although Young’s modulus of NiTi is relatively low, it still needs to be reduced; one of the promising ways is by introducing porous structure. Traditional manufacturing processes, such as casting, can hardly produce complex porous structures. Additive manufacturing (AM) is one of the most advanced manufacturing technologies that can solve impurity issues, and selective laser melting (SLM) is one of the well-known methods. This paper reviews the developments of AM-NiTi with a particular focus on SLM-NiTi utilization in biomedical applications. Correspondingly, this paper aims to describe the three key factors, including powder preparation, processing parameters, and gas atmosphere during the overall process of porous NiTi. The porous structure design is of vital importance, so the unit cell and pore parameters are discussed. The mechanical properties of SLM-NiTi, such as hardness, compressive strength, tensile strength, fatigue behavior, and damping properties and their relationship with design parameters are summarized. In the end, it points out the current challenges. Considering the increasing application of NiTi implants, this review paper may open new frontiers for advanced and modern designs.
Collapse
Affiliation(s)
- Yintao Zhang
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Shokouh Attarilar
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.,Department of Pediatric Orthopaedics, Xinhua Hospital Affiliated to Shanghai Jiao Tong University, School of Medicine, Shanghai 200092, China
| | - Liqiang Wang
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Weijie Lu
- State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Junlin Yang
- Department of Pediatric Orthopaedics, Xinhua Hospital Affiliated to Shanghai Jiao Tong University, School of Medicine, Shanghai 200092, China
| | - Yuanfei Fu
- Ninth People's Hospital, School of Medicine, Shanghai Jiao Tong University, Shanghai 200011, China
| |
Collapse
|
3
|
Jain P, Rana M, Biswas JK, Khan MR. Biomechanics of spinal implants-a review. Biomed Phys Eng Express 2020; 6:042002. [PMID: 33444261 DOI: 10.1088/2057-1976/ab9dd2] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/26/2022]
Abstract
Spinal instrumentations have been classified as rigid fixation, total disc replacement and dynamic stabilization system for treatment of various spinal disorders. The efficacy and biomechanical suitability of any spinal implant can be measured through in vitro, in vivo experiments and numerical techniques. With the advancement in technology finite element models are making an important contribution to understand the complex structure of spinal components along with allied functionality, designing and application of spinal instrumentations at preliminary design stage. This paper aimed to review the past and recent studies to describe the biomechanical aspects of various spinal implants. The literatures were grouped and reviewed in accordance to instrumentation category and their functionality in the spinal column at respective locations.
Collapse
Affiliation(s)
- Pushpdant Jain
- School of Mechanical Engineering, VIT Bhopal University, Bhopal-Indore Highway Kothrikalan, Sehore Madhya Pradesh - 466114, India
| | | | | | | |
Collapse
|
4
|
Islam ABMR, Karadoğan E. Analysis of One-Dimensional Ivshin-Pence Shape Memory Alloy Constitutive Model for Sensitivity and Uncertainty. MATERIALS 2020; 13:ma13061482. [PMID: 32214042 PMCID: PMC7143482 DOI: 10.3390/ma13061482] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/21/2020] [Revised: 03/18/2020] [Accepted: 03/18/2020] [Indexed: 11/16/2022]
Abstract
Shape memory alloys (SMAs) are classified as smart materials due to their capacity to display shape memory effect and pseudoelasticity with changing temperature and loading conditions. The thermomechanical behavior of SMAs has been simulated by several constitutive models that adopted microscopic thermodynamic or macroscopic phenomenological approaches. The Ivshin–Pence model is one of the most popular SMA macroscopic phenomenological constitutive models. The construction of the model requires involvement of parameters that possess inherent uncertainty. Under varying operating temperatures and loading conditions, the uncertainty in these parameters propagates and, therefore, affects the predictive power of the model. The propagation of uncertainty while using this model in real-life applications can result in performance discrepancies or failure at extreme conditions. In this study, we employed a probabilistic approach to perform the sensitivity and uncertainty analysis of the Ivshin–Pence model. Sobol and extended Fourier Amplitude Sensitivity Testing (eFAST) methods were used to perform the sensitivity analysis for simulated isothermal loading/unloading at various operating temperatures. It is evident that the model’s prediction of the SMA stress–strain curves varies due to the change in operating temperature and loading condition. The average and stress-dependent sensitivity indices present the most influential parameters at several temperatures.
Collapse
|
5
|
Ohrt-Nissen S, Dahl B, Gehrchen M. Choice of Rods in Surgical Treatment of Adolescent Idiopathic Scoliosis: What Are the Clinical Implications of Biomechanical Properties? - A Review of the Literature. Neurospine 2018; 15:123-130. [PMID: 29991241 PMCID: PMC6104735 DOI: 10.14245/ns.1836050.025] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/20/2018] [Accepted: 05/01/2018] [Indexed: 11/23/2022] Open
Abstract
The surgical treatment of adolescent idiopathic scoliosis (AIS) involves 3-dimensional curve correction with multisegmental pedicle screws attached to contoured bilateral rods. The substantial corrective forces exert a high level of stress on the rods, and the ability of the rod to withstand these forces without undergoing permanent deformation relies on its biomechanical properties. These properties, in turn, are dependent on the material, diameter, and shape of the rod. The surgical treatment of AIS is characterized by the requirement for a special biomechanical profile that may differ substantially from what is needed for adult deformity surgery. This overview summarizes the current knowledge of rod biomechanics in frequently used rod constructs, with a particular focus on translational research between biomechanical studies and clinical applicability in AIS patients.
Collapse
Affiliation(s)
- Søren Ohrt-Nissen
- Department of Orthopedic Surgery, Spine Unit, Copenhagen University Hospital, Copenhagen, Denmark
| | - Benny Dahl
- Department of Orthopedics and Scoliosis Surgery, Texas Children's Hospital, Houston, TX, USA
| | - Martin Gehrchen
- Department of Orthopedic Surgery, Spine Unit, Copenhagen University Hospital, Copenhagen, Denmark
| |
Collapse
|
6
|
A randomized double-blinded clinical trial to evaluate the safety and efficacy of a novel superelastic nickel-titanium spinal rod in adolescent idiopathic scoliosis: 5-year follow-up. EUROPEAN SPINE JOURNAL : OFFICIAL PUBLICATION OF THE EUROPEAN SPINE SOCIETY, THE EUROPEAN SPINAL DEFORMITY SOCIETY, AND THE EUROPEAN SECTION OF THE CERVICAL SPINE RESEARCH SOCIETY 2017; 27:327-339. [PMID: 28776134 DOI: 10.1007/s00586-017-5245-x] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/02/2016] [Revised: 07/12/2017] [Accepted: 07/27/2017] [Indexed: 10/19/2022]
Abstract
PURPOSE To evaluate the safety and efficacy of a superelastic shape-memory alloy (SNT) rod used in the treatment of adolescent idiopathic scoliosis (AIS). METHODS AIS Patients with Lenke 1 curves undergoing fusion surgery were randomized (1:1) at the time of surgery to receive either the SNT or a conventional titanium alloy (CTA) rod. Radiographs were obtained preoperatively and postoperatively up to 5 years of follow-up. Parameters assessed included coronal and sagittal Cobb angles, and overall truncal and shoulder balance. Sagittal profiles were subcategorized into Types A (<20°), B (20-40°), and C (>40°). RESULTS Twenty-four patients with mean age of 15 years were recruited. A total of 87.0% of subjects were followed up till postoperative 5 years, but all patients had minimum 2 years of follow-up. The fulcrum-bending correction index for the SNT group was 113% at postoperative day 4 and 127% at half-year, while the CTA group was 112% at postoperative day 4 and only 106% at half-year. In terms of sagittal profile, the SNT group moved toward type B profile at half-year follow-up with a mean correction of 7.6°, while no significant change was observed in the CTA group (-0.7°). Nickel levels remained normal, and there were no complications. CONCLUSIONS This is the first randomized clinical trial of a novel SNT rod for treating patients with AIS, noting it to be safe and has potential to gradually correct scoliosis over time. This study serves as a pilot and platform to properly power future large-scale studies to demonstrate efficacy and superiority.
Collapse
|
7
|
Abstract
For dental orthodontic applications, NiTi wires are used under bending conditions in the oral environment for a long period. The purpose of this study was to investigate the effect of bending stress on the corrosion of NiTi wires using potentiodynamic and potentiostatic tests in artificial saliva. The results indicated that bending stress induces a higher corrosion rate of NiTi wires in passive regions. It is suggested that the passive oxide film of specimens would be damaged under bending conditions. Auger electron spectroscopic analysis showed a lower thickness of passive films on stressed NiTi wires compared with unstressed specimens in the passive region. By scanning electron microscopy, localized corrosion was observed on stressed Sentalloy specimens after a potentiodynamic test at pH 2. In conclusion, this study indicated that bending stress changed the corrosion properties and surface characteristics of NiTi wires in a simulated intra-oral environment.
Collapse
Affiliation(s)
- I H Liu
- Institute of Oral Medicine, National Cheng Kung University, Tainan, Taiwan, ROC
| | | | | | | |
Collapse
|
8
|
Son BC, Kim DR. Radicular Pain due to Subsidence of the Nitinol Shape Memory Loop for Stabilization after Lumbar Decompressive Laminectomy. J Korean Neurosurg Soc 2015; 57:61-4. [PMID: 25674347 PMCID: PMC4323509 DOI: 10.3340/jkns.2015.57.1.61] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/09/2013] [Revised: 12/09/2013] [Accepted: 05/05/2014] [Indexed: 11/27/2022] Open
Abstract
A number of dynamic stabilization systems have been used to overcome the problems associated with spinal fusion with rigid fixation recently and the demand for an ideal dynamic stabilization system is greater for younger patients with multisegment disc degeneration. Nitinol, a shape memory alloy of nickel and titanium, is flexible at low temperatures and regains its original shape when heated, and the Nitinol shape memory loop (SML) implant has been used as a posterior tension band mostly in decompressive laminectomy cases because the Nitinol implant has various characteristics such as high elasticity and a tensile force, flexibility, and biological compatibility. The reported short-term outcomes of the application of SMLs as posterior column supporters in cervical and lumbar decompressive laminectomies seem to be positive, and complications are minimal except for the rare occurrence of pullout and fracture of the SML. However, there was no report of neurological complications related to neural compression in spite of the use of the loop of SML in the epidural space. The authors report a case of delayed development of radiating pain caused by subsidence of the SML resulting epidural compression.
Collapse
Affiliation(s)
- Byung-Chul Son
- Department of Neurosurgery, Seoul St. Mary's Hospital, College of Medicine, The Catholic University of Korea, Seoul, Korea. ; The Catholic Neuroscience Institute, College of Medicine, The Catholic University of Korea, Seoul, Korea
| | - Deog-Ryeong Kim
- Department of Neurosurgery, Nowon Eulji Hospital, Eulji University, Seoul, Korea
| |
Collapse
|
9
|
Mohd Jani J, Leary M, Subic A, Gibson MA. A review of shape memory alloy research, applications and opportunities. ACTA ACUST UNITED AC 2014. [DOI: 10.1016/j.matdes.2013.11.084] [Citation(s) in RCA: 2185] [Impact Index Per Article: 218.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
10
|
Abstract
BACKGROUND CONTEXT Spinal instrumentation has been used for more than five decades. Since the introduction of the Harrington rod in 1962, new rod materials and concepts have been developed. Rigid rod fixation has achieved higher fusion rates than previous methods. Recently, semirigid rod fixation devices have been used for both dynamic stabilization and fusion fixation. Memory rods, which have an interesting ability to return to their pre-bent shape when the temperature increases, are expected to be used for scoliosis correction. PURPOSE To review the previous literature regarding biofunctionality and biocompatibility of rods in spinal surgery. CONCLUSION The properties of each type of rod need to be taken into consideration when performing spinal instrumentation surgery.
Collapse
Affiliation(s)
- Hiroyuki Yoshihara
- Department of Orthopaedic Surgery, NYU Hospital for Joint Diseases, 301 E. 17th St, New York, NY 10003, USA; Department of Orthopaedic Surgery, Nagoya City University Graduate School of Medical Sciences, 1-Kawasumi, Mizuho-Cho, Mizuho-Ku, Nagoya 467-8601, Japan.
| |
Collapse
|
11
|
Sánchez-Márquez JM, Sánchez Pérez-Grueso FJ, Fernández-Baíllo N, Gil-Garay E, Antuña-Antuña S. [Modulation of scoliotic spine growth in experimental animals using intelligent metal bars]. Rev Esp Cir Ortop Traumatol (Engl Ed) 2013; 57:310-7. [PMID: 24071045 DOI: 10.1016/j.recot.2013.07.001] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/27/2013] [Revised: 06/26/2013] [Accepted: 07/01/2013] [Indexed: 11/17/2022] Open
Abstract
OBJECTIVE To create an experimental structural scoliosis model in mice to evaluate the efficacy of shape-memory metals to gradually correct the deformity over time. MATERIAL AND METHOD Experimental scoliosis was generated in 3 week-old mice by means of a suture between the left scapula and pelvis for 8 weeks. They were then randomised into two groups: a control group, in which the suture was cut, and another, in those that also had a Nitinol straight memory-wire implant fixed to the column. Serial X-rays were performed to determine the efficacy of the Nitinol in the correction of the scoliosis. In a second time, the histological changes at apical vertical body level and the adjacent discs were evaluated pre- and post-correction. RESULTS A mean 81.5° kyphoscoliosis was gradually induced. In the control group, after cutting the suture, an initial reduction in the deformity was observed, but later it remained stable throughout the time (54° at two weeks). In the Nitinol group, a gradual reduction was observed in the scoliosis angle value, to a mean of 8.7° at two weeks. The curvature of the apical vertebral body and adjacent discs were partially corrected after two weeks of correcting the deformity. CONCLUSION This scoliosis model has demonstrated the efficacy of a straight Nitinol wire fixed to the spinal column in the gradual correction of kyphoscoliosis and in the changes in its adjacent structures.
Collapse
Affiliation(s)
- J M Sánchez-Márquez
- Unidad de Raquis, Servicio de Cirugía Ortopédica y Traumatología, Hospital Universitario La Paz, Madrid, España.
| | | | | | | | | |
Collapse
|
12
|
Modulation of scoliotic spine growth in experimental animals using intelligent metal bars. Rev Esp Cir Ortop Traumatol (Engl Ed) 2013. [DOI: 10.1016/j.recote.2013.07.009] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022] Open
|
13
|
Roth AK, Bogie R, Jacobs E, Arts JJ, van Rhijn LW. Large animal models in fusionless scoliosis correction research: a literature review. Spine J 2013; 13:675-88. [PMID: 23582429 DOI: 10.1016/j.spinee.2013.02.043] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 10/16/2012] [Revised: 02/18/2013] [Accepted: 02/18/2013] [Indexed: 02/03/2023]
Abstract
BACKGROUND CONTEXT Numerous prenatal, systemic, or local procedures have been described that have created an experimental scoliosis within different animal species. Compression-based fusionless scoliosis correction devices have been used to induce scoliosis (inverse approach) as an indication for their potential corrective efficacy in large animals. Deformities that most closely approximate the three-dimensional nature of an idiopathic-like scoliosis have been created in large animals using a posterior spinal tether. Fusionless scoliosis correction devices have subsequently been tested in these models. PURPOSE To provide an overview of large animal models used for preclinical testing of fusionless scoliosis correction devices and to describe recent advances in the creation of an idiopathic-like scoliosis large animal model. STUDY DESIGN Literature review of large animal models in fusionless scoliosis correction research. METHODS MEDLINE electronic database was searched for studies in which large animal models for spinal or vertebral growth modulation or the creation of an experimental scoliosis were described. The literature search was limited to articles written in the English language. RESULTS The pig appears to be the most suitable animal species for preclinical testing of fusionless scoliosis correction devices because of its large growth potential and the possibility for early weaning. With the inverse approach, it is difficult to gain insight into the possible corrective efficacy of the tested device, and therefore, a two-step approach is preferred. Using a posterior spinal tether, persistent spinal deformities are attained when the deformity has approximately doubled in comparison to the postoperative measure in a time span of approximately 12 weeks. Sufficient tether midline offset is required to render rib procedures unnecessary. CONCLUSIONS An idiopathic-like scoliosis animal model can be created using a posterior spinal tether in a fully reversible procedure. Experimental results will need to be reproduced to establish a standard idiopathic-like scoliosis large animal model.
Collapse
Affiliation(s)
- Alex K Roth
- Department of Orthopaedic Surgery, Research School Caphri, Maastricht University Medical Centre, P. Debyelaan 25, 6229 HX Maastricht, The Netherlands
| | | | | | | | | |
Collapse
|
14
|
Sánchez Márquez JM, Sánchez Pérez-Grueso FJ, Fernández-Baíllo N, Gil Garay E. Gradual scoliosis correction over time with shape-memory metal: a preliminary report of an experimental study. SCOLIOSIS 2012; 7:20. [PMID: 23126381 PMCID: PMC3517762 DOI: 10.1186/1748-7161-7-20] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/17/2012] [Accepted: 10/15/2012] [Indexed: 11/10/2022]
|
15
|
Kim DG, Eun JP, Park JS. Posterior cervical fixation with a nitinol shape memory loop for primary surgical stabilization of atlantoaxial instability: a preliminary report. J Korean Neurosurg Soc 2012; 52:21-6. [PMID: 22993673 PMCID: PMC3440498 DOI: 10.3340/jkns.2012.52.1.21] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/21/2012] [Revised: 04/24/2012] [Accepted: 07/06/2012] [Indexed: 11/27/2022] Open
Abstract
Objective To evaluate a new posterior atlantoaxial fixation technique using a nitinol shape memory loop as a simple method that avoids the risk of vertebral artery or nerve injury. Methods We retrospectively evaluated 14 patients with atlantoaxial instability who had undergone posterior C1-2 fusion using a nitinol shape memory loop. The success of fusion was determined clinically and radiologically. We reviewed patients' neurologic outcomes, neck disability index (NDI), solid bone fusion on cervical spine films, changes in posterior atlantodental interval (PADI), and surgical complications. Results Solid bone fusion was documented radiologically in all cases, and PADI increased after surgery (p<0.05). All patients remained neurologically intact and showed improvement in NDI score (p<0.05). There were no surgical complications such as neural tissue or vertebral artery injury or instrument failure in the follow-up period. Conclusion Posterior C1-2 fixation with a nitinol shape memory loop is a simple, less technically demanding method compared to the conventional technique and may avoid the instrument-related complications of posterior C1-2 screw and rod fixation. We introduce this technique as one of the treatment options for atlantoaxial instability.
Collapse
Affiliation(s)
- Duk-Gyu Kim
- Department of Neurosurgery, Research Institute of Clinical Medicine, Institute for Medical Sciences, Chonbuk National University Medical School and Hospital, Jeonju, Korea
| | | | | |
Collapse
|
16
|
Tabesh M, Goel V, Elahinia MH. Shape Memory Alloy Expandable Pedicle Screw to Enhance Fixation in Osteoporotic Bone: Primary Design and Finite Element Simulation. J Med Device 2012. [DOI: 10.1115/1.4007179] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022] Open
Abstract
The properties of shape memory alloys, specifically the equiatomic intermetallic NiTi, are unique and significant in that they offer simple and effective solutions for some of the biomechanical issues encountered in orthopedics. Pedicle screws, used as an anchoring point for the implantation of spinal instrumentations in the spinal fracture and deformity treatments, entail the major drawback of loosening and backing out in osteoporotic bone. The strength of the screw contact with the surrounding bone diminishes as the bone degrades due to osteoporosis. The SMArtTM pedicle screw design is developed to address the existing issue in degraded bone. It is based on the interaction of bi-stable shape memory-superelastic elements. The bi-stable assembly acts antagonistically and consists of an external superelastic tube that expands the design protrusions when body temperature is attained; also an internal shape memory wire, inserted into the tube, retracts the assembly while locally heated to above the body temperature. This innovative bi-stable solution augments the pull-out resistance while still allowing for screw removal. The antagonistic wire-tube assembly was evaluated and parametrically analyzed as for the interaction of the superelastic tube and shape memory wire using a finite element model developed in COMSOL Multiphysics®. The outcomes of the simulation suggest that shape memory NiTi inserts on the SMArtTM pedicle screw can achieve the desired antagonistic functionality of expansion and retraction. Consequently, a parametric analysis was conducted over the effect of different sizes of wires and tubes. The dimensions for the first sample of this innovative pedicle screw were determined based on the results of this analysis.
Collapse
Affiliation(s)
- Majid Tabesh
- Dynamic and Smart Systems Laboratory, Engineering Center for Orthopedic Research Excellence, University of Toledo, 2801 West Bancroft, Toledo, Ohio, 43606
| | - Vijay Goel
- Dynamic and Smart Systems Laboratory, Engineering Center for Orthopedic Research Excellence, University of Toledo, 2801 West Bancroft, Toledo, Ohio, 43606
| | - Mohammad H. Elahinia
- Dynamic and Smart Systems Laboratory, Engineering Center for Orthopedic Research Excellence, University of Toledo, 2801 West Bancroft, Toledo, Ohio, 43606
| |
Collapse
|
17
|
Kawakita E, Wang Z, Kato T, Inaba T, Kasai Y. Basic research on a cylindrical implant made of shape-memory alloy for the treatment of long bone fracture. Open Orthop J 2012; 6:239-44. [PMID: 22848336 PMCID: PMC3406304 DOI: 10.2174/1874325001206010239] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 03/31/2012] [Revised: 06/06/2012] [Accepted: 06/08/2012] [Indexed: 11/22/2022] Open
Abstract
The internal fixing materials made from shape-memory alloys (SMAs) have recently been reported for long bone fracture. We present a new internal fixation technique using a cylindrical SMAs implant in a rat femoral fracture healing. The implant was designed in a shape to circumferentially fix the fractured bone using resilient SMA claws. To evaluate the fixing ability of the implant, three-point bending and rotation tests were performed. Fifteen female Wister rats were treated surgically as an experimental model. All rats were killed at 16 weeks postoperatively, and the radiological and histological evaluations were performed. In biomechanical test, the good fixation ability of the implant was demonstrated. In animal model, no cases of postoperative infection or death were encountered and postoperative gait was stable in all cases. Radiological examination at 16 weeks postoperatively demonstrated the implant firmly fixed to the fractured part, endosteal healing, and no callus formation in all cases. In Histological evaluation, bone union in all cases was characterized by endochondral ossification from within the medullary cavity. In conclusion, our cylindrical SMA implant provided good fixation in biomechanical tests, and achieved bone union in all 15 rats. If a larger size is designed in the future, our implant will be a clinically applicable, useful fixing material for fracture of the human long bones.
Collapse
Affiliation(s)
- Eiji Kawakita
- Department of Orthopaedic Surgery, Saiseikai Matsusaka Hospital, Japan
| | | | | | | | | |
Collapse
|
18
|
Abstract
STUDY DESIGN Single- or dual-shape memory metal (nitinol) rods were used to create spinal deformity in a mini-pig model. OBJECTIVE To determine the practicality of employing nitinol rods for clinical spinal deformity correction using an animal deformity creation model. SUMMARY OF BACKGROUND DATA Nitinol rods can, theoretically, be approximated to curved spines when cooled/malleable, achieving spinal deformity correction on warming and returning to their original (straight) shape. Square cross-sectional rods may allow transverse plane correction. Single-rod constructs could achieve greater deformity correction clinically, whereas dual rods provide lower implant failure risk. The clinical feasibility and potential effectiveness of single versus dual nitinol rod constructs in creating spinal deformity in an animal model was studied. METHODS Twenty mature mini-pigs were grouped: single rod with screws locked to the rod, single rod with screws unlocked, dual rods--locked, dual rods--unlocked. Square nitinol rods (80° manufactured curvature) were cooled (-20°C), straightened, placed into multilevel square-headed pedicle screws and warmed (40°C). Serial radiographs followed deformity creation over 12 weeks. Single versus dual rods, locked versus unlocked rods were compared (P<0.01). Computed tomography showed screw placement and fusion (none attempted). Preoperative and 12-week postoperative serum nickel levels were compared (P<0.05). RESULTS Scoliotic deformities were created immediately in single and dual rod groups (28°±8°, 26°±7°; P=0.59); locked and unlocked groups (24°±7°, 30°±6°; P=0.08). At final follow-up, there was no difference between single and dual rods (31°±11°, 28°±10°; P=0.58); unlocked rods and locked rods were 34.9°±9.4° and 25.0°±8.1° (P=0.02). No implant failure occurred, however, the aggressive rod contour led to vertebral endplate fractures. Serum nickel 12 weeks post rod placement were unchanged from preop levels (5.1±0.6 μg/L, 4.7±0.2 μg/L, P=0.10). CONCLUSION Nitinol rods, reliable in creating spinal deformity in an animal model, could potentially straighten deformed spines. Square rods, facilitated by markedly reduced stiffness when cooled, have the potential to predictably perform axial plane correction.
Collapse
|
19
|
Abstract
Shape memory alloys, and in particular NiTi alloys, are characterized by two unique behaviors,
thermally or mechanically activated: the shape memory effect and pseudo-elastic effect. These
behaviors, due to the peculiar crystallographic structure of the alloys, assure the recovery of the original shape even after large deformations and the maintenance of a constant applied force in correspondence of significant displacements. These properties, joined with good corrosion and bending resistance, biological and magnetic resonance compatibility, explain the large diffusion, in the last 20 years, of SMA in the production of biomedical devices, in particular for mini-invasive techniques. In this paper a detailed review of the main applications of NiTi alloys in dental, orthopedics, vascular, neurological, and surgical fields is presented. In particular for each device the main characteristics and the advantages of using SMA are discussed. Moreover, the paper underlines the opportunities and the room for new ideas able to enlarge the range of SMA applications. However, it is fundamental to remember that the complexity of the material and application requires a strict collaboration between clinicians, engineers, physicists and chemists for defining accurately the problem, finding the best solution in terms of device design and accordingly optimizing the NiTi alloy properties.
Collapse
|
20
|
Temporary use of shape memory spinal rod in the treatment of scoliosis. EUROPEAN SPINE JOURNAL : OFFICIAL PUBLICATION OF THE EUROPEAN SPINE SOCIETY, THE EUROPEAN SPINAL DEFORMITY SOCIETY, AND THE EUROPEAN SECTION OF THE CERVICAL SPINE RESEARCH SOCIETY 2010; 20:118-22. [PMID: 20628769 PMCID: PMC3036020 DOI: 10.1007/s00586-010-1514-7] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/13/2009] [Revised: 03/16/2010] [Accepted: 07/01/2010] [Indexed: 11/23/2022]
Abstract
NiTinol shape memory alloy is characterized by its malleability at low temperatures and its ability to return to a preconfigured shape above its activation temperature. This process can be utilized to assist in scoliosis correction. The goal of this retrospective study was to evaluate the clinical and radiographic results of intraoperative use of shape memory alloy rod in the correction of scoliosis. From May 2002 to September 2006, 38 scoliosis patients (ranging from 50° to 120°; 22 cases over 70°) who underwent shape memory alloy-assisted correction in our institute were reviewed. During the operation, a shape memory alloy rod served as a temporary correction tool. Following correction, the rod was replaced by a rigid rod. The mean blood loss at surgery was 680 ± 584 ml; the mean operative time was 278 ± 62 min. The major Cobb angle improved from an average 78.4° preoperatively to 24.3° postoperatively (total percent correction 71.4%). In 16 patients with a major curve <70° and flexibility of 52.7%, the deformity improved from 58.4° preoperatively to 12.3° postoperatively (percent correction, 78.9%). In 22 patients with a major curve >70° and flexibility of 25.6%, the deformity improved from 94.1° preoperatively to 30.1° postoperatively (percent correction, 68.1%). Only one case had a deep infection. There were no neurologic, vascular or correction-related complications such as screw pullout or metal fracture. The study shows that the intraoperative use of a shape memory rod is a safe and effective method to correct scoliosis.
Collapse
|
21
|
Wang Y, Zheng G, Zhang X, Zhang Y, Xiao S, Wang Z. Comparative analysis between shape memory alloy-based correction and traditional correction technique in pedicle screws constructs for treating severe scoliosis. EUROPEAN SPINE JOURNAL : OFFICIAL PUBLICATION OF THE EUROPEAN SPINE SOCIETY, THE EUROPEAN SPINAL DEFORMITY SOCIETY, AND THE EUROPEAN SECTION OF THE CERVICAL SPINE RESEARCH SOCIETY 2009; 19:394-9. [PMID: 19902275 DOI: 10.1007/s00586-009-1207-2] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/10/2009] [Revised: 09/04/2009] [Accepted: 10/25/2009] [Indexed: 10/20/2022]
Abstract
The three-dimensional correction of severe rigid scoliosis has been improved by segmental pedicle screw instrumentation. However, there can be significant difficulty related to the use of a rigid rod, especially in the apex region of severe scoliosis. This study is a retrospective matched cohort study to evaluate the advantages of Nitinol shape memory alloy (SMA) rod-based correction by comparing the clinical and radiographic results obtained from using a temporary SMA rod and those from a standard rod in the correction of severe scoliosis. From May 2004 to September 2006, patients with matched curve type, ages at surgery, operative methods and fusion levels in our institute and instrumented with either SMA rods (n = 14) or traditional correction techniques (n = 16) were reviewed. In SMA group, the SMA rods served as a temporary intraoperative tool for deformity correction and were replaced by standard rods. The blood loss at surgery averaged 778 +/- 285 ml in the traditional group and 585 +/- 188 ml in the SMA group (P < 0.05). Operative time averaged 284 +/- 53 min in the SMA group and 324 +/- 41 min in the traditional group (P < 0.05). In the SMA group, the preoperative major curve was 92.6 degrees +/- 13.7 degrees with a flexibility of 25.5 +/- 7.3% was corrected to 29.4 degrees +/- 5.7 degrees demonstrating a 68.4% immediate postoperative correction. In the traditional group, the preoperative major curve was 88.6 degrees +/- 14.6 degrees with a flexibility of 29.3 +/- 6.6% was corrected to 37.2 degrees +/- 7.3 degrees demonstrating a 57.8% immediate postoperative correction. There was a statistic difference between the SMA group and traditional group in correction rate of the major thoracic curve. In the SMA group, one case suffered from deep infection 2 months postoperatively. In the traditional group, 6 of 16 cases suffered pedicle screw pull out or loosening during placement of the standard rod at the apex vertebrae on the concave side. In three cases, the mono-axial pedicle screws near the apex were abandoned and in five cases replaced with poly-axial pedicle screws. This study shows that the temporary use of SMA rod may reduce the operative time, blood loss, while improve the correction of the coronal plane when compared with standard techniques.
Collapse
Affiliation(s)
- Yan Wang
- Department of Orthopaedics, Chinese PLA General Hospital, 28 Fuxing Road, 100853, Beijing, People's Republic of China.
| | | | | | | | | | | |
Collapse
|
22
|
Hoh DJ, Hoh BL, Amar AP, Wang MY. Shape memory alloys: metallurgy, biocompatibility, and biomechanics for neurosurgical applications. Neurosurgery 2009; 64:199-214; discussion 214-5. [PMID: 19404101 DOI: 10.1227/01.neu.0000330392.09889.99] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022] Open
Abstract
SHAPE MEMORY ALLOYS possess distinct dynamic properties with particular applications in neurosurgery. Because of their unique physical characteristics, these materials are finding increasing application where resiliency, conformation, and actuation are needed. Nitinol, the most frequently manufactured shape memory alloy, responds to thermal and mechanical stimuli with remarkable mechanical properties such as shape memory effect, super-elasticity, and high damping capacity. Nitinol has found particular use in the biomedical community because of its excellent fatigue resistance and biocompatibility, with special interest in neurosurgical applications. The properties of nitinol and its diffusionless phase transformations contribute to these unique mechanical capabilities. The features of nitinol, particularly its shape memory effect, super-elasticity, damping capacity, as well as its biocompatibility and biomechanics are discussed herein. Current and future applications of nitinol and other shape memory alloys in endovascular, spinal, and minimally invasive neurosurgery are introduced. An understanding of the metallurgic properties of nitinol provides a foundation for further exploration of its use in neurosurgical implant design.
Collapse
Affiliation(s)
- Daniel J Hoh
- Department of Neurological Surgery, Keck School of Medicine, University of Southern California, Los Angeles, California, USA
| | | | | | | |
Collapse
|
23
|
Akel I, Yazici M. Growth modulation in the management of growing spine deformities. J Child Orthop 2009; 3:1-9. [PMID: 19308606 PMCID: PMC2656840 DOI: 10.1007/s11832-008-0145-6] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 07/11/2008] [Accepted: 10/22/2008] [Indexed: 02/03/2023] Open
Abstract
The Hueter-Volkmann law explains the physiological response of the growth plate under mechanical loading. This law mainly explains the pathological mechanism for growing long-bone deformities. Vertebral endplates also show a similar response under mechanical loading. Experimental studies have provided information about spinal growth modulation and, now, it is possible to explain the mechanism of the curvature progression. Convex growth arrest is shown to successfully treat deformities of the growing spine and unnecessary growth arrest of the whole spine is prevented. Both anterior and posterior parts of the convexity should be addressed to achieve a satisfactory improvement in the deformity, albeit epiphysiodesis effect cannot be stipulated at all times. Anterior vertebral body stapling without fusion yielded better results with new shape memory alloys and techniques. This method can be used with minimally invasive techniques and has the potential advantage of producing reversible physeal arrest. Instrumented posterior hemiepiphysiodesis seems to be as effective as classical combined anterior and posterior arthrodesis, where it is less invasive and morbid. Convex hemiepiphysiodesis with concave-side distraction through growing rod techniques provide a better control of the curve immediately after surgery. This method has the advantages of posterior instrumented hemiepiphysiodesis, but necessitates additional surgeries. Concave-side rib shortening and/or convex-side lengthening is an experimental method with an indirect effect on spinal growth. To conclude, whatever the cause of the spinal deformity, growth modulation can be used to manage the growing spine deformities with no or shorter segment fusions.
Collapse
Affiliation(s)
- Ibrahim Akel
- />Orthopedics and Traumatology Unit, Ministry of Health, Ankara Training and Research Hospital, Ulucanlar, 06340 Ankara, Turkey
| | - Muharrem Yazici
- />Orthopedics and Traumatology Department, Hacettepe University, 06100 Ankara, Sihhiye, Turkey
| |
Collapse
|
24
|
Yu DK, Heo DH, Cho SM, Choi JH, Sheen SH, Cho YJ. Posterior cervical fixation with nitinol shape memory loop in the anterior-posterior combined approach for the patients with three column injury of the cervical spine : preliminary report. J Korean Neurosurg Soc 2008; 44:303-7. [PMID: 19119466 DOI: 10.3340/jkns.2008.44.5.303] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/25/2008] [Accepted: 10/31/2008] [Indexed: 11/27/2022] Open
Abstract
OBJECTIVE The authors reviewed clinical and radiological outcomes in patients with three column injury of the cervical spine who had undergone posterior cervical fixation using Nitinol shape memory alloy loop in the anterior-posterior combined approach. MATERIALS Nine patients were surgically treated with anterior cervical fusion using an iliac bone graft and dynamic plate-screw system, and the posterior cervical fixation using Nitinol shape memory loop (Davydovtrade mark) at the same time. A retrospective review was performed. Clinical outcomes were assessed using the Frankel grading method. We reviewed the radiological parameters such as bony fusion rate, height of iliac bone graft strut, graft subsidence, cervical lordotic angle, and instrument related complication. RESULTS Single-level fusion was performed in five patients, and two-level fusion in four. Solid bone fusion was presented in all cases after surgery. The mean height of graft strut was significantly decreased from 20.46+/-9.97 mm at immediate postoperative state to 18.87+/-8.60 mm at the final follow-up period (p<0.05). The mean cervical lordotic angle decreased from 13.83+/-11.84 degrees to 11.37+/-6.03 degrees at the immediate postoperative state but then, increased to 24.39+/-9.83 degrees at the final follow-up period (p<0.05). There were no instrument related complications. CONCLUSION We suggest that the posterior cervical fixation using Nitinol shape memory alloy loop may be a simple and useful method, and be one of treatment options in anterior-posterior combined approach for the patients with the three column injury of the cervical spine.
Collapse
Affiliation(s)
- Dong-Kun Yu
- Department of Neurosurgery, Chuncheon Sacred Heart Hospital, College of Medicine, Hallym University, Chuncheon, Korea
| | | | | | | | | | | |
Collapse
|
25
|
Yeung KWK, Poon RWY, Chu PK, Chung CY, Liu XY, Lu WW, Chan D, Chan SCW, Luk KDK, Cheung KMC. Surface mechanical properties, corrosion resistance, and cytocompatibility of nitrogen plasma-implanted nickel-titanium alloys: a comparative study with commonly used medical grade materials. J Biomed Mater Res A 2007; 82:403-14. [PMID: 17295246 DOI: 10.1002/jbm.a.31154] [Citation(s) in RCA: 52] [Impact Index Per Article: 3.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Stainless steel and titanium alloys are the most common metallic orthopedic materials. Recently, nickel-titanium (NiTi) shape memory alloys have attracted much attention due to their shape memory effect and super-elasticity. However, this alloy consists of equal amounts of nickel and titanium, and nickel is a well known sensitizer to cause allergy or other deleterious effects in living tissues. Nickel ion leaching is correspondingly worse if the surface corrosion resistance deteriorates. We have therefore modified the NiTi surface by nitrogen plasma immersion ion implantation (PIII). The surface chemistry and corrosion resistance of the implanted samples were studied and compared with those of the untreated NiTi alloys, stainless steel, and Ti-6Al-4V alloy serving as controls. Immersion tests were carried out to investigate the extent of nickel leaching under simulated human body conditions and cytocompatibility tests were conducted using enhanced green fluorescent protein mice osteoblasts. The X-ray photoelectron spectroscopy results reveal that a thin titanium nitride (TiN) layer with higher hardness is formed on the surface after nitrogen PIII. The corrosion resistance of the implanted sample is also superior to that of the untreated NiTi and stainless steel and comparable to that of titanium alloy. The release of nickel ions is significantly reduced compared with the untreated NiTi. The sample with surface TiN exhibits the highest amount of cell proliferation whereas stainless steel fares the worst. Compared with coatings, the plasma-implanted structure does not delaminate as easily and nitrogen PIII is a viable way to improve the properties of NiTi orthopedic implants.
Collapse
Affiliation(s)
- K W K Yeung
- Division of Spine Surgery, Department of Orthopaedics and Traumatology, Faculty of Medicine, University of Hong Kong, Pokfulam, Hong Kong
| | | | | | | | | | | | | | | | | | | |
Collapse
|
26
|
Singh R, Dahotre NB. Corrosion degradation and prevention by surface modification of biometallic materials. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2007; 18:725-51. [PMID: 17143737 DOI: 10.1007/s10856-006-0016-y] [Citation(s) in RCA: 73] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/27/2006] [Accepted: 10/10/2006] [Indexed: 05/12/2023]
Abstract
Metals, in addition to ceramics and polymers, are important class of materials considered for replacement of non-functional parts in the body. Stainless steel 316, titanium and titanium alloys, Co-Cr, and nitinol shape memory alloys are the most frequently used metallic materials. These alloys are prone to corrosion in various extents. This review briefly discusses the important biomaterials, their properties, and the physiological environment to which these materials are exposed. Corrosion performance of currently used metallic materials has been assessed and threat to the biocompatibility from corrosion products/metal ions is discussed. The possible preventive measures to improve corrosion resistance by surface modification and to increase the bioactivity of the metallic surfaces have also been discussed. Importance of the formation of oxide layers on the metal surface, another aspect of corrosion process, has been correlated with the host response. The gap areas and future direction of research are also outlined in the paper.
Collapse
|
27
|
Kim YS, Zhang HY, Moon BJ, Park KW, Ji KY, Lee WC, Oh KS, Ryu GU, Kim DH. Nitinol spring rod dynamic stabilization system and Nitinol memory loops in surgical treatment for lumbar disc disorders: short-term follow up. Neurosurg Focus 2007. [DOI: 10.3171/foc.2007.22.1.10] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
Object
The purpose of this study was to analyze the usefulness of the BioFlex, a Nitinol spring rod dynamic stabilization system, and the Nitinol shape memory loop (KIMPF-DI Fixing System) as a posterior dynamic stabilization system in surgery for low-back pain.
Methods
The 103 patients who underwent treatment with the BioFlex system were divided into two groups: Group 1, dynamic stabilization with or without posterior lumbar interbody fusion (PLIF); and Group 2, rigid fixation (PLIF + BioFlex system only). A total of 66 segments were treated with only the BioFlex system; in these the preoperative range of motion (ROM) was 10.0 ± 4.3°, which changed to 4.1 ± 1.9° after surgery. Adjacent-segment ROM changed from 8.4 ± 3.4° to 10.7 ± 3.2° in Group 1 and from 6.5 ± 3.2° to 10.5 ± 4.6° in Group 2 postoperatively. A total of 110 segments received both BioFlex and PLIF, with a fusion rate of 90.0%. The visual analog scale score for back pain improved from 7.3 ± 3.1 to 1.4 ± 1.8 in Group 1 and from 7.4 ± 2.4 to 2.1 ± 2.3 in Group 2. The Oswestry Disability Index improved from 35.2 ± 6.4 to 12.1 ± 4.5 in Group 1 and from 37.8 ± 5.7 to 13.6 ± 4.2 in Group 2. (The ROM and assessment scores expressed are the mean ± standard deviation.)
The 194 patients in whom Nitinol memory loops were implanted were analyzed based on the preoperative and 1-year postoperative ROM of each lumbar segment. The change of ROM in looped segments treated with PLIF was significantly reduced, but the change of ROM in looped segments without PLIF was not significant. The change of ROM at the segment adjacent to the loop was not significant, and the change of kyphosis reflected a slight recovery.
Conclusions
The Nitinol BioFlex dynamic stabilization system can achieve stabilization and simultaneously allow physiological movement, which can in turn decrease the degeneration of adjacent segments. When used with PLIF, the fusion rate can be expected to increase. The flexible Nitinol shape memory loop, a posterior dynamic stabilization device, is an adequate tension band that displays strength similar to the posterior ligamentous structures. In combination with PLIF at the main lesion, the BioFlex system or the Nitinol memory loop can provide posterior dynamic stabilization to the transitional upper or lower segments, enhance the fusion rate, reduce the adjacent-segment degeneration, and provide dynamic stabilization of the spine.
Collapse
Affiliation(s)
- Young-Soo Kim
- 1Department of Neurosurgery, Kwang-Hye Spine Hospital, Seoul, Korea
- 2Department of Neurosurgery, Yonsei University, Seoul, Korea
| | - Ho-Yeol Zhang
- 2Department of Neurosurgery, Yonsei University, Seoul, Korea
- 3Department of Neurosurgery, National Health Insurance Corporation Ilsan Hospital, Goyang, Korea and
| | - Byung-Jin Moon
- 2Department of Neurosurgery, Yonsei University, Seoul, Korea
| | - Kyung-Woo Park
- 1Department of Neurosurgery, Kwang-Hye Spine Hospital, Seoul, Korea
| | - Kyu-Yeul Ji
- 1Department of Neurosurgery, Kwang-Hye Spine Hospital, Seoul, Korea
| | - Won-Chang Lee
- 1Department of Neurosurgery, Kwang-Hye Spine Hospital, Seoul, Korea
| | - Kyu-Sung Oh
- 1Department of Neurosurgery, Kwang-Hye Spine Hospital, Seoul, Korea
| | - Gwon-Ui Ryu
- 1Department of Neurosurgery, Kwang-Hye Spine Hospital, Seoul, Korea
| | - Daniel H. Kim
- 4Department of Neurosurgery, Ochsner Medical Center, New Orleans, Louisiana
| |
Collapse
|
28
|
Influence of biomaterial structure and hardness on its osseo-integration: histomorphometric evaluation of porous nitinol and titanium implants. EUROPEAN JOURNAL OF ORTHOPAEDIC SURGERY AND TRAUMATOLOGY 2005. [DOI: 10.1007/s00590-005-0251-9] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
|
29
|
Yeung KWK, Poon RWY, Liu XY, Ho JPY, Chung CY, Chu PK, Lu WW, Chan D, Cheung KMC. Investigation of nickel suppression and cytocompatibility of surface-treated nickel-titanium shape memory alloys by using plasma immersion ion implantation. J Biomed Mater Res A 2005; 72:238-45. [PMID: 15662652 DOI: 10.1002/jbm.a.30201] [Citation(s) in RCA: 37] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Abstract
Nickel-titanium (NiTi) shape memory alloys are increasingly being used in orthopedic applications. However, there is a concern that Ni is harmful to the human body. We have recently investigated the use of nitrogen, or oxygen plasma immersion ion implantation to mitigate this deleterious effect. Our results reveal that the near-surface Ni concentration in all the treated samples is significantly suppressed. In addition, our in vitro tests show that the plasma-treated surfaces are cytologically compatible allowing the attachment and proliferation of osteoblasts. Among the two types of samples, the best biological effects are found on the samples with nitrogen implantation.
Collapse
Affiliation(s)
- K W K Yeung
- Department of Orthopaedics and Traumatology, Division of Spine Surgery, Faculty of Medicine, The University of Hong Kong, Pokfulam, Hong Kong
| | | | | | | | | | | | | | | | | |
Collapse
|
30
|
Petrini L, Migliavacca F, Massarotti P, Schievano S, Dubini G, Auricchio F. Computational Studies of Shape Memory Alloy Behavior in Biomedical Applications. J Biomech Eng 2005; 127:716-25. [PMID: 16121543 DOI: 10.1115/1.1934203] [Citation(s) in RCA: 55] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Background: Nowadays, shape memory alloys (SMAs) and in particular Ni–Ti alloys are commonly used in bioengineering applications as they join important qualities as resistance to corrosion, biocompatibility, fatigue resistance, MR compatibility, kink resistance with two unique thermo-mechanical behaviors: the shape memory effect and the pseudoelastic effect. They allow Ni–Ti devices to undergo large mechanically induced deformations and then to recover the original shape by thermal loading or simply by mechanical unloading. Method of approach: A numerical model is developed to catch the most significant SMA macroscopic thermo-mechanical properties and is implemented into a commercial finite element code to simulate the behavior of biomedical devices. Results: The comparison between experimental and numerical response of an intravascular coronary stent allows to verify the model suitability to describe pseudo-elasticity. The numerical study of a spinal vertebrae spacer, where the effects of different geometries and material characteristic temperatures are investigated, allows to verify the model suitability to describe shape memory effect. Conclusion: the results presented show the importance of computational studies in designing and optimizing new biomedical devices.
Collapse
Affiliation(s)
- Lorenza Petrini
- Dipartimento di Meccanica Strutturale, Università di Pavia, Via Ferrata 1, 27100 Pavia, Italy.
| | | | | | | | | | | |
Collapse
|
31
|
Yeung KWK, Poon RWY, Liu XY, Ho JPY, Chung CY, Chu PK, Lu WW, Chan D, Cheung KMC. Corrosion resistance, surface mechanical properties, and cytocompatibility of plasma immersion ion implantation-treated nickel-titanium shape memory alloys. J Biomed Mater Res A 2005; 75:256-67. [PMID: 16078209 DOI: 10.1002/jbm.a.30413] [Citation(s) in RCA: 52] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Abstract
Nickel-titanium shape memory alloys are promising materials in orthopedic applications because of their unique properties. However, for prolonged use in a human body, deterioration of the corrosion resistance of the materials becomes a critical issue because of the increasing possibility of deleterious ions released from the substrate to living tissues. We have investigated the use of nitrogen, acetylene, and oxygen plasma immersion ion implantation (PIII) to improve the corrosion resistance and mechanical properties of the materials. Our results reveal that the corrosion resistance and mechanical properties such as hardness and elastic modulus are significantly enhanced after surface treatment. The release of nickel is drastically reduced as compared with the untreated control. In addition, our in vitro tests show that the plasma-treated surfaces are well tolerated by osteoblasts. Among the three types of samples, the best biological effects are observed on the nitrogen PIII samples.
Collapse
Affiliation(s)
- K W K Yeung
- Division of Spine Surgery, Department of Orthopaedics and Traumatology, Queen Mary Hospital, Faculty of Medicine, The University of Hong Kong, 5/F Professorial Block, Pokfulam, Hong Kong
| | | | | | | | | | | | | | | | | |
Collapse
|
32
|
Firoozbakhsh K, Moneim MS, Yi IS, Umeda Y, Theele D, Shahinpoor M. Smart intramedullary rod for correction of pediatric bone deformity: a preliminary study. Clin Orthop Relat Res 2004:194-201. [PMID: 15241165 DOI: 10.1097/01.blo.0000128283.05708.d3] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 01/31/2023]
Abstract
We were interested in determining if a smart intramedullary rod made of nitinol shape-memory alloy is capable of correcting deformed immature long bones. Because of limitations in our study design the process was reversed in that we examined the smart rod's ability to create a deformity rather than to correct one. Smart rods of different lengths and diameters were heat-treated to resume a radius of curvature of 30 to 110 mm. The low and high temperature phases of the smart rods were set, respectively, at 0 degrees C to 4 degrees C and 36 degrees C to 38 degrees C. The preshaped smart intramedullary rods were implanted in the cooled martensite phase in the medullary canal of the tibia in eight rabbits, where they restored their austenite form, causing a continuous bending force. On a weekly basis anteroposterior and lateral radiographs of the surgically treated tibia and the contralateral tibia were obtained for comparison. Rabbits were euthanized 6 weeks after surgery and computed tomography scans of both tibias were used for image analysis. Smart rods with a larger radius of curvature showed only minimal signs of remodeling; however, rods with a radius of curvature of 50 and 70 mm generated enough force history to create bone remodeling and deformation. The amount of bone deformation was highly magnified when unicortical corticotomy on the tension side was done. Based on this preliminary study the technology of the smart intramedullary rod may provide a valuable alternative method to correct pediatric skeletal deformities.
Collapse
Affiliation(s)
- Keikhosrow Firoozbakhsh
- Department of Orthopaedics and Rehabilitation, School of Medicine, University of New Mexico, Albuquerque, NM, USA
| | | | | | | | | | | |
Collapse
|
33
|
Kujala S, Ryhänen J, Danilov A, Tuukkanen J. Effect of porosity on the osteointegration and bone ingrowth of a weight-bearing nickel-titanium bone graft substitute. Biomaterials 2003; 24:4691-7. [PMID: 12951012 DOI: 10.1016/s0142-9612(03)00359-4] [Citation(s) in RCA: 213] [Impact Index Per Article: 10.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
Abstract
Porous nickel-titanium (NiTi) alloy is a promising new material for a bone graft substitute with good strength properties and an elastic modulus closer to that of bone than any other metallic material. The purpose of this study was to evaluate the effect of porosity on the osteointegration of NiTi implants in rat bone. The porosities (average void volume) and the mean pore size (MPS) were 66.1% and 259+/-30 microm (group 1, n=14), 59.2% and 272+/-17 microm (group 2, n=4) and 46.6% and 505+/-136 microm (group 3, n=15), respectively. The implants were implanted in the distal femoral metaphysis of the rats for 30 weeks. The proportional bone-implant contact was best in group 1 (51%) without a significant difference compared to group 3 (39%). Group 2 had lower contact values (29%) than group 1 (p=0.038). Fibrotic tissue within the porous implant was found more often in group 1 than in group 3 (p=0.021), in which 12 samples out of 15 showed no signs of fibrosis. In conclusion, porosity of 66.1% (MPS 259+/-30 microm) showed best bone contact (51%) of the porosities tested here. However, the porosity of 46.6% (MPS 505+/-136 microm) with bone contact of 39% was not significantly inferior in this respect and showed lower incidence of fibrosis within the porous implant.
Collapse
Affiliation(s)
- Sauli Kujala
- Department of Surgery, Oulu University Hospital, P.O. Box 21, Oys FIN-90029, Finland.
| | | | | | | |
Collapse
|
34
|
Betz RR, Kim J, D'Andrea LP, Mulcahey MJ, Balsara RK, Clements DH. An innovative technique of vertebral body stapling for the treatment of patients with adolescent idiopathic scoliosis: a feasibility, safety, and utility study. Spine (Phila Pa 1976) 2003; 28:S255-65. [PMID: 14560201 DOI: 10.1097/01.brs.0000092484.31316.32] [Citation(s) in RCA: 110] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
STUDY DESIGN Retrospective review. OBJECTIVES To report the feasibility, safety, and utility of vertebral body stapling without fusion as an alternative treatment for adolescent idiopathic scoliosis. SUMMARY OF BACKGROUND DATA The success rate of brace treatment of adolescent idiopathic scoliosis ranges from 50% to 82%. However, poor self-image and brace compliance are issues for the patient. An alternative method of treatment such as a motion-preserving vertebral body stapling to provide curve stability would be desirable. METHODS We retrospectively reviewed 21 patients (27 curves) with adolescent idiopathic scoliosis treated with vertebral body stapling. Patients were immature as defined by Risser sign <or=2. RESULTS The concept of vertebral body stapling of the convex side of a patient with adolescent idiopathic scoliosis is feasible. The procedure was safe, with no major complications and three minor complications. One patient had an intraoperative segmental vein bleed resulting in an increased estimated blood loss of 1500 cc as compared to the average estimated blood loss of 247 cc for all patients. One patient had a chylothorax and one pancreatitis. No patient has had a staple dislodge or move during the follow-up period (mean 11 months, range 3-36 months), and no adverse effects specifically from the staples have been identified. Utility (defined as curve stability) was evaluated in 10 patients with stapling with greater than 1-year follow-up (mean 22.6 months) and preoperative curve <50 degrees. Progression of >or=6 degrees or beyond 50 degrees was considered a failure of treatment. Of these 10 patients, 6 (60%) remained stable or improved and 4 (40%) progressed. One of 10 (10%) in the stapling group had progressed beyond 50 degrees and went on to fusion. Six patients required stapling of a second curve, three as part of the primary surgery, and three as a second stage, because a second untreated curve progressed. The results need to be considered with caution, as the follow-up is still short. CONCLUSIONS The data demonstrate that vertebral body stapling for the treatment of scoliosis in the adolescent was feasible and safe in this group of 21 patients. In the short-term, stapling appears to have utility in stabilizing curves of progressive adolescent idiopathic scoliosis.
Collapse
Affiliation(s)
- Randal R Betz
- Shriners Hospitals for Children, Philadelphia, PA 19140, USA.
| | | | | | | | | | | |
Collapse
|
35
|
Assad M, Chernyshov AV, Jarzem P, Leroux MA, Coillard C, Charette S, Rivard CH. Porous titanium-nickel for intervertebral fusion in a sheep model: part 2. Surface analysis and nickel release assessment. J Biomed Mater Res B Appl Biomater 2003; 64:121-9. [PMID: 12516086 DOI: 10.1002/jbm.b.10531] [Citation(s) in RCA: 50] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
Porous titanium-nickel (PTN) devices represent an alternative to traditional cage implants. PTN materials possess an interconnecting network of pores with capillarity properties that may promote bone ingrowth, long-term fixation, and intervertebral fusion without the need for bone grafting. However, their considerable surface area and nickel content may elicit concerns over sensitization potential. Therefore, PTN surface corrosion and nickel release resistance must be carefully studied. To evaluate this possibility, a PTN interbody fusion device (IFD) was compared to a conventional nonporous cage made of TiAlV, a well-known biocompatible biomaterial, in a sheep model. PTN and TiAlV IFDs were inserted at two non-contiguous lumbar sites for 3, 6, and 12 months postsurgery. Their surface was then evaluated by scanning electron microscopy (SEM) combined with backscattered electron analysis (BSE). No evidence of surface corrosion was observed either pre- or postimplantation, regardless of device type. Dosage of nickel ions was also performed with the use of inductively coupled plasma-mass spectrometry (ICP-MS). Blood nickel levels were observed to be within acceptable levels at all postinstrumentation times. Nickel content in PTN-adjacent tissue, as well as in detoxification and remote organs, was equivalent both in PTN-treated and control sheep. Therefore, porous titanium-nickel demonstrated resistance to both in vivo surface corrosion and nickel ion release and compared very well with a conventional titanium implant in the course of a 12-month sheep study.
Collapse
Affiliation(s)
- M Assad
- R&D Department, Biorthex Inc., 9001 L'Acadie Blvd., Suite 802, Montreal (QC) H4N 3H5, Canada.
| | | | | | | | | | | | | |
Collapse
|
36
|
Moneim MS, Firoozbakhsh K, Mustapha AA, Larsen K, Shahinpoor M. Flexor tendon repair using shape memory alloy suture: a biomechanical evaluation. Clin Orthop Relat Res 2002:251-9. [PMID: 12218491 DOI: 10.1097/00003086-200209000-00025] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 01/31/2023]
Abstract
The purpose of the current study was to test in vitro a new shape memory alloy suture for flexor tendon repair. Forty fresh-frozen human anatomic flexor superficialis and profundus tendons were divided and repaired via the cruciate four-strand technique using one of two suture materials (the shape memory alloy suture and the 4-0 Ethibond suture). The forces required to cause a 1, 2, and 3 mm gap, ultimate load to failure, and repair stiffness were compared. Twenty specimens of each suture material also were tensile tested for load to failure, tensile strength, and elongation at failure. The shape memory alloy suture had a significantly higher mean resistance force to 1, 2, and 3 mm gap formation than the 4-0 Ethibond suture (47 N versus 31 N, 51 N versus 36 N, and 57 N versus 41 N, respectively). The shape memory alloy suture repair was 40% stronger than the 4-0 Ethibond suture (61.9 +/- 8.8 N versus 44.3 +/- 10.6 N). Repair with the shape memory alloy suture was significantly stiffer than repair with the 4-0 Ethibond suture (8.1 +/- 1.0 N/mm versus 6.1 +/- 0.9 N/mm). The load to failure and tensile strength of the shape memory alloy suture were significantly higher than that of the 4-0 Ethibond suture. The values of elongation for the two materials were not significantly different. The results of the current study suggest that the shape memory alloy suture may be superior to the 4-0 Ethibond suture in resisting gap formation in the range of forces generated in the early rehabilitation protocol and may be the future material of choice for tendon repairs.
Collapse
Affiliation(s)
- Moheb S Moneim
- Department of Orthopaedics and Rehabilitation, School of Medicine, University of New Mexico, Albuquerque 87131, USA
| | | | | | | | | |
Collapse
|
37
|
Kujala S, Ryhänen J, Jämsä T, Danilov A, Saaranen J, Pramila A, Tuukkanen J. Bone modeling controlled by a nickel-titanium shape memory alloy intramedullary nail. Biomaterials 2002; 23:2535-43. [PMID: 12033601 DOI: 10.1016/s0142-9612(01)00388-x] [Citation(s) in RCA: 46] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Nitinol (NiTi) shape memory metal alloy makes it possible to prepare functional implants that apply a continuous bending force to the bone. The purpose of this study was to find out if bone modeling can be controlled with a functional intramedullary NiTi nail. Pre-shaped intramedullary NiTi nails (length 26 mm, thickness 1.0-1.4 mm) with a curvature radius of 25-37 mm were implanted in the cooled martensite form in the medullary cavity of the right femur in eight rats, where they restored their austenite form, causing a bending force. After 12 weeks, the operated femurs were compared with their non-operated contralateral counterpairs. Anteroposterior radiographs demonstrated significant bowing, as indicated by the angle between the distal articular surface and the long axis of the femur (p = 0.003). Significant retardation of longitudinal growth and thickening of operated femurs were also seen. Quantitative densitometry showed a significant increase in the average cross-sectional cortical area (p = 0.001) and cortical thickness (p = 0.002), which were most obvious in the mid-diaphyseal area. Cortical bone mineral density increased in the proximal part of the bone and decreased in the distal part. Polarized light microscopy of the histological samples revealed that the new bone induced by the functional intramedullary nail was mainly woven bone. In conclusion, this study showed that bone modeling can be controlled with a functional intramedullary nail made of nickel-titanium shape memory alloy.
Collapse
Affiliation(s)
- Sauli Kujala
- Department of Surgery, Oulu University Hospital, Finland.
| | | | | | | | | | | | | |
Collapse
|
38
|
Abstract
Man-made devices have been implanted into the body to relieve pain, to restore function, and to facilitate healing. The subjects of this review are the materials, and to a lesser extent, the design aspects of the numerous implants that are available to the surgeon in dealing with the ailing spine. Often it is the material aspects of such devices that are responsible for their success or failure. It may be that osteoconductive properties are desired for implants to assist fusion, whereas as inert a material as possible would be preferred for interpositional barriers. The materials composing the instrumentation used to facilitate healing of spinal fractures would ideally have properties that optimize strength and biocompatibility, while at the same time minimizing imaging artifacts and allowing a gradual transfer of load from the instrumentation to the vertebral body (i.e., viscoelastic effects). The application of biomaterials and biomechanics to the design of spinal devices is obvious; what may be more subtle though is what the in vivo interactions of these will be. The study of such aspects must continue in order to better evolve the designs and subsequent results of implanted spinal devices.
Collapse
Affiliation(s)
- E O Martz
- Department of Biomedical Engineering, College of Engineering, Iowa City, USA
| | | | | | | |
Collapse
|
39
|
Abstract
OBJECTIVES to describe the physical properties of shape-memory alloys and the surgical, scientific and commercial applications of nitinol, in particular. DESIGN AND METHODS a Medline, Internet and library search with contributions from commerce to describe the alloy's structure, behaviour and biocompatibility, and design for devices constructed from nitinol. RESULTS nitinol has the properties of thermal shape memory and superelasticity that make it ideal for many vascular and general surgical prostheses and disposables, and for various commercial applications. CONCLUSIONS further research into shape-memory alloys from scientific and commercial groups should widen their use in vascular and endovascular surgery.
Collapse
Affiliation(s)
- C D Barras
- Departments of Vascular Surgery, Monash Medical Centre and Epworth Hospital, Melbourne, Australia
| | | |
Collapse
|
40
|
Ryhänen J, Kallioinen M, Tuukkanen J, Junila J, Niemelä E, Sandvik P, Serlo W. In vivo biocompatibility evaluation of nickel-titanium shape memory metal alloy: muscle and perineural tissue responses and encapsule membrane thickness. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH 1998; 41:481-8. [PMID: 9659619 DOI: 10.1002/(sici)1097-4636(19980905)41:3<481::aid-jbm19>3.0.co;2-l] [Citation(s) in RCA: 83] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
Nickel-titanium shape memory alloy (Nitinol) has properties that could be very useful in surgical applications. Thermal shape memory, superelasticity, and high damping properties make such alloys behave differently compared to other implant metals. There has previously been a lack of sufficient evidence on the biocompatibility of Nitinol. The purpose of this study was to evaluate general soft tissue response and biocompatibility to Nitinol in vivo, and to clarify neural and perineural responses, previously unreported. Seventy-five rats were randomized into three groups. Test specimens were implanted into paravertebral muscle and near the sciatic nerve. A comparison was made between Nitinol, stainless steel, and Ti-6Al-4V. The animals were euthanized at 2, 4, 8, 12, and 26 weeks after implantation. General morphologic and histologic observations were made under light microscopy. Semiautomatic computerized image analysis was used to measure the encapsule membrane thickness around the implants. The muscular tissue response to Nitinol was clearly nontoxic, regardless of the time period. The overall inflammatory response to Nitinol was very similar to that of stainless steel and Ti-6Al-4V alloy. There were no necroses, granulomas, or signs of dystrophic soft tissue clacification. The immune cell response to Nitinol remained low. Only a few foreign-body giant cells were present. The detected neural and perineural responses were also clearly nontoxic and nonirritating with Nitinol. No qualitative differences in histology between the different test materials could be seen. At 8 weeks, the encapsule membrane of Nitinol was thicker than that of stainless steel (mean 62 +/- 25 microns vs. 41 +/- 8 microns). At the end of the study, the encapsule thickness was equal to all the materials tested. We concluded that Nitinol had good in vivo biocompatibility after intramuscular and perineural implantation in rats in the 26-week follow-up. Based on the results of the present study, Nitinol appears to have good potential for clinical use.
Collapse
Affiliation(s)
- J Ryhänen
- Department of Surgery, Oulu University Central Hospital, University of Oulu, Finland
| | | | | | | | | | | | | |
Collapse
|
41
|
Assad M, Yahia LH, Rivard CH, Lemieux N. In vitro biocompatibility assessment of a nickel-titanium alloy using electron microscopy in situ end-labeling (EM-ISEL). JOURNAL OF BIOMEDICAL MATERIALS RESEARCH 1998; 41:154-61. [PMID: 9641635 DOI: 10.1002/(sici)1097-4636(199807)41:1<154::aid-jbm18>3.0.co;2-n] [Citation(s) in RCA: 39] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Abstract
Shape memory nickel-titanium (NiTi) alloys are potential candidates for biomedical applications. However, their equiatomic composition (50 wt% Ni) is controversial, and concerns have been raised about their biocompatibility level because of the carcinogenicity potential. The relative in vitro genotoxicity of NiTi therefore was evaluated and compared to commercially pure titanium (cpTi), 316L stainless steel (SS 316L), and positive and negative controls. To do so, human peripheral blood lymphocytes were cultured in semiphysiological medium that previously had been exposed to the biomaterials. The electron microscopy in situ end-labeling (EM-ISEL) assay then was performed in order to provide quantification of in vitro chromatin DNA single-stranded breaks (SSBs). Chromosomes and nuclei were harvested and exposed to exonuclease III, which amplifies DNA lesions at 3' ends of breaks. After random priming, incorporation of biotin-dUTP was labeled by immunogold binding, which then was detected using electron microscopy. Cellular chromatin exposed to the positive control demonstrated a significantly stronger immunogold labeling than when it was exposed to NiTi, cpTi, SS 316L extracts, or the untreated control. Moreover, gold particle counts, whether in the presence of NiTi, cpTi, or the negative control medium, were not statistically different. NiTi genocompatibility therefore presents promising prescreening results towards its biocompatibility approval.
Collapse
Affiliation(s)
- M Assad
- Centre de Recherche Pédiatrique, Hôpital Ste-Justine, Montréal, Québec, Canada.
| | | | | | | |
Collapse
|
42
|
Wever DJ, Veldhuizen AG, Sanders MM, Schakenraad JM, van Horn JR. Cytotoxic, allergic and genotoxic activity of a nickel-titanium alloy. Biomaterials 1997; 18:1115-20. [PMID: 9247349 DOI: 10.1016/s0142-9612(97)00041-0] [Citation(s) in RCA: 162] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
The nearly equiatomic nickel-titanium (NiTi) alloy is known for its shape memory properties. These properties can be put to excellent use in various biomedical applications, such as wires for orthodontic tooth alignment and osteosynthesis staples. The aim of this study was to evaluate the short-term biological safety of the NiTi alloy. We carried out an end-point dilution minimal essential medium (MEM) extract cytotoxicity test, a guinea-pig sensitization test and two genotoxicity tests: the Salmonella reverse mutation test and the chromosomal aberration test. The NiTi alloy showed no cytotoxic, allergic or genotoxic activity, similar to the clinical reference control material AISI 316 LVM stainless steel. This promising biological behaviour was most likely due to a minimal release of ions and in that way a reflection of the good corrosion resistance of the NiTi alloy. Given these very good results, together with the good tissue compatibility as shown in several implantation studies in the literature, the NiTi alloy can be regarded as a biologically safe implant material with many promising clinical applications.
Collapse
Affiliation(s)
- D J Wever
- Department of Orthopaedics, University Hospital of Groningen, The Netherlands
| | | | | | | | | |
Collapse
|
43
|
Ryhänen J, Niemi E, Serlo W, Niemelä E, Sandvik P, Pernu H, Salo T. Biocompatibility of nickel-titanium shape memory metal and its corrosion behavior in human cell cultures. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH 1997; 35:451-7. [PMID: 9189823 DOI: 10.1002/(sici)1097-4636(19970615)35:4<451::aid-jbm5>3.0.co;2-g] [Citation(s) in RCA: 277] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
Abstract
Nickel-titanium alloy (Nitinol) is a metallic biomaterial that has a unique thermal shape memory, superelasticity, and high damping properties. Nitinol is potentially very useful in orthopedic surgery, for example. At present, there are not enough confirmative biocompatibility data available on Nitinol. The aim of our study was to clarify the primary cytotoxicity and corrosion rate of Nitinol in human cell cultures. Comparisons were made with stainless steel (Stst), titanium (Ti), composite material (C), and control cultures with no test discs. Human osteoblasts (OB) and fibroblasts (FB) were incubated for 10 days with test discs of equal size, 6 x 7 mm. The cultures were photographed and the cells counted. Samples from culture media were collected on days 2, 4, 6, and 8, and the analysis of metals in the media was done using flameless atomic absorption spectrophotometry. The proliferation of FB was 108% (Nitinol), 134% (Ti) (p < 0.02), 107% (Stst), and 48% (C)(p < 0.0001) compared to the control cultures. The proliferation of OB was 101% (Nitinol), 100% (Ti), 105% (Stst), and 54% (C) (p < 0.025) compared to the controls. Initially, Nitinol released more nickel (129-87 micrograms/L) into the cell culture media than Stst (7 micrograms/L), but after 2 days the concentrations were about equal (23-5 micrograms/L versus 11-1 micrograms/L). The titanium concentrations from both Nitinol and Ti samples were all < 20 micrograms/L. We conclude that Nitinol has good in vitro biocompatibility with human osteoblasts and fibroblasts. Despite the higher initial nickel dissolution, Nitinol induced no toxic effects, decrease in cell proliferation, or inhibition on the growth of cells in contact with the metal surface.
Collapse
Affiliation(s)
- J Ryhänen
- Department of Surgery, University of Oulu, Finland
| | | | | | | | | | | | | |
Collapse
|