Both angled bony-increased offset and metal-augmented baseplates provide satisfactory bone incorporation to the glenoid in reverse total shoulder arthroplasty: a radiographic evaluation using tomosynthesis

BACKGROUND

Angled bony-increased offset and metal-augmented baseplate have recently been used to achieve neutral to inferior inclination of the glenoid implant. Nonetheless, bone incorporation is difficult to evaluate using computed tomography or other conventional methods owing to the presence of metal artifacts; therefore, whether bone incorporation between the grafted bone and glenoid or between the graft and baseplate implant can be achieved remains unclear. Several studies have reported the effectiveness of tomosynthesis in reducing metal artifacts for the evaluation of implant loosening, bone resorption, and spot welds. We aimed to evaluate and compare the bone incorporation rates between angled bony-increased offset and metal-augmented implants using tomosynthesis with metal artifact reduction technology. We hypothesized that a high bone incorporation rate would be obtained with angled bony-increased offset and a metal-augmented baseplate.

METHODS

A total of 52 patients who underwent reverse total shoulder arthroplasty (TSA) with angled bony-increased offset and 42 patients who underwent reverse total shoulder arthroplasty with metal-augmented baseplate were assessed and followed up for a minimum of 2 years. The bone incorporation and implant loosening rates were compared between the 2 groups, and the sites of spot welds and trabeculation were recorded according to zones. Bone incorporation between the bone and prosthesis was defined as a confirmation of spot welds connecting the porous area and bone in more than three zones. Bone incorporation between the native bone and grafted bone was defined as an observation of trabeculation. Glenoid loosening was defined as the presence of at least 1 mm radiolucency around the prosthesis in more than 2 zones.

RESULTS

Both the angled bony-increased offset and metal-augmented baseplate groups achieved sufficient bone incorporation rates (98% [51/52 cases] vs. 100% [42/42 cases], P = 1.0) and low implant loosening rates (2% [1/52 cases] vs. 0% [0/42 cases], P = 1.0). Spot welds and trabeculation were likely to be confirmed in the lower parts of the glenoid.

CONCLUSION

The two groups did not show any significant differences regarding bone incorporation rates. Considering the complexity of performing the procedure with angled bony-increased offset, the use of a metal-augmented baseplate can serve as an alternative treatment to avoid superior inclination in reverse total shoulder arthroplasty.

Long-term CT follow-up of patients with lumbar spondylolysis reveals low rate of spontaneous bone fusion

OBJECTIVES

Knowledge about the long-term outcome of patients with lumbar spondylolysis (LS) is limited. This study assessed the frequency of bone fusion in conservatively treated lumbar spondylolysis with photon counting detector computed tomography.

METHODS

Patients with lumbar spondylolysis diagnosed with CT or MRI were prospectively enrolled and underwent CT 5-10 years after initial imaging. Image assessment included evaluation of Meyerding grade, listhesis size, measurement of the lysis gap, and disc integrity on the lysis level. Comparisons were made between bone fusion as the primary endpoint and sex, body mass index, age at diagnosis, follow-up interval, size of listhesis, Meyerding grade, size of the lysis gap, sports activity, and presence of pain.

RESULTS

A total of 39 patients (26.0 ± 3.1 years, 15 female) with lumbar spondylolysis on 41 levels were included after a mean follow-up period of 9.1 ± 2.2 years. Nine patients (22.0%, four female) showed complete fusion of the lysis gap. Patients with bone fusion of the lysis gap had a significantly lower Meyerding grade (p = 0.01), smaller size of the listhesis (p = 0.019), and smaller anterior and posterior lysis gap size (p = 0.046 and p = 0.011, respectively). Unilateral lyses showed significantly higher fusion rates than bilateral lyses (40.0% vs. 16.1%, p = 0.01). No statistically significant difference was found for pain at follow-up between patients with and without bone fusion (p = 0.253).

CONCLUSION

Bone fusion occurred in about a fifth of conservatively treated lumbar spondylolysis after a follow-up period of 9 years. Factors associated with a successful fusion were a lower Meyerding grade, minimal listhesis, and a small lysis gap.

Fibula allograft transplantation combined with locking plate for treatment of recurrent monostotic fibular fibrous dysplasia: A case report

BACKGROUND

Fibrous dysplasia is a congenital disorder in which normal bone is replaced by fibro-osseous tissue or irregular trabeculae of woven bone intermixed with mature collagenous tissue. A single or multiple bones are affected. This rare bone disorder has three clinical patterns including monostotic, polyostotic, and that associated with McCune–Albright syndrome. Most studies report primary fibrous dysplasia. However, a few cases of recurrent monostotic fibular fibrous dysplasia have been reported. Here, we report a therapeutic strategy for recurrent fibular fibrous dysplasia.

CASE SUMMARY

A 4-year-old boy was admitted for persistent pain in the left lower limb and abnormal gait over the previous 9 mo. He had no history of present or past illness. Preoperative imaging data showed erosion-like changes with bone expansion of the left middle and lower fibular segment. Tumor tissue in the fibular bone marrow cavity was removed by curettage, and rapid intraoperative pathological examination suggested fibular fibrous dysplasia. An allograft was implanted into the fibular medullary cavity. However, he was readmitted with clinical symptoms including persistent pain, abnormal gait, and local swelling at the age of 6 years. He was diagnosed with recurrent fibular fibrous dysplasia based on the second medical examination. He underwent fibular bone tumor radical resection and longus fibular allograft transplantation combined with fibular bone locking plate and screws. Good host bone to allogenic bone graft fusion was observed by the physician on postoperative regular follow-up.

CONCLUSION

Radical resection of fibrous dysplasia and longus fibula allograft combined with internal fixation for reconstruction are suitable for the treatment of recurrent monostotic fibular fibrous dysplasia.

Anterior debridement combined with autogenous iliac bone graft fusion for the treatment of lower cervical tuberculosis: a multicenter retrospective study

BACKGROUND

This study aimed to analyze the clinical efficacy of one-stage anterior debridement of lower cervical tuberculosis using iliac crest bone graft fusion and internal fixation.

MATERIALS AND METHODS

A retrospective analysis was performed on 48 patients with lower cervical tuberculosis admitted to multiple medical centers from June 2018 to June 2021. Among them, 36 patients had lesions involving two vertebrae and 12 patients had lesions involving more than three vertebrae. All patients were treated with quadruple antituberculosis drugs for more than 2 weeks before the operation, and then treated with one-stage anterior debridement and autogenous iliac bone graft fusion combined with titanium plate internal fixation. After the operation, antituberculosis drugs were continued for 12-18 months. The patients were followed-up to observe the improvement in clinical symptoms, bone graft fusion, Cobb angle, visual analog score (VAS), erythrocyte sedimentation rate (ESR), C-reactive protein (CRP), wound healing, and neurological function.

RESULTS

The patients were followed-up for 13-43 months, with an average of 21.46 ± 1.52 months. The clinical symptoms significantly improved after the operation. The bone graft was completely fused in all patients, and the bone fusion time was 3-6 months, with an average of 4.16 ± 0.47 months. At the last follow-up, the Cobb angle, VAS, ESR, and CRP level were significantly lower than those before surgery (P < 0.05). None of the patients had loosening, detachment, or rupture of the internal fixation, and no recurrence occurred. All surgical incisions healed in one stage without infection or sinus formation. The preoperative Frankel neurological function classification was grade B in 7 cases, grade C in 13, grade D in 18, and grade E in 10. At the last follow-up, 8 cases recovered to grade D and 40 recovered to grade E.

CONCLUSIONS

For patients with lower cervical tuberculosis, based on oral treatment with quadruple antituberculosis drugs, direct decompression through anterior debridement, followed by autologous iliac bone graft fusion combined with internal fixation can completely remove tuberculosis foci, rebuild the stability of the cervical spine, and obtain good clinical efficacy. Level of evidence Level 3.

Utility of the sternal synostosis for age-at-death estimation in a Mediterranean population

Age estimation is essential for the identification of skeletal remains in Forensic Anthropology. Numerous studies have been performed on diverse regions of the skeleton, including the synostosis of the sternal segments. In this sense, the fusion of the different sternal segments was assessed to analyze whether it had a correlation with age-at-death in a Mediterranean population. A total of 189 sternums which belonged to individuals between the ages of 20 and 98 from both sexes (56.6% males; 43.4% females), from the San José's Cemetery of Granada Contemporary Collection (Spain), were selected. Scores ranging from 1 to 3 were assigned in accordance with the degree of manubrio-sternal fusion and sterno-xyphoidal fusion. Cohen's kappa coefficient for intra- and inter-observer error was performed and then chi-square test was run to analyze any correlation between the stage of synostosis and the skeletal age. Only the sterno-xyphoidal fusion, which starts between 30 and 39 years old, provided a predictable result, as the manubrium and the sternal body usually remain without fusion. This study demonstrates a direct correlation between fusion of the xyphoid process and chronological age.

The efficacy of teriparatide (Cinnopar®) on bone repair in mandibular fractures: A single blinded randomized clinical trial

This study focused on the effects of teriparatide (CinnoPar) on healing and postoperative complications in mandibular bone fractures. In this single-blind randomized controlled trial, 30 patients with a mandibular fracture hospitalized for open reduction internal fixation were randomly assigned to the intervention (I) (n = 15) and control (C) (n = 15) groups. Both groups received daily acetaminophen and cephalexin for 1 week. For 1 month, Group I received daily subcutaneous teriparatide injections. The Radiographic Union Scale of the Mandible (RUSM) was used to assess mandibular bone fusion subjectively, and the Hounsfield unit (HU) was used to objectively assess radiodensity in a computed tomography (CT) scan. In both groups, the visual analog scale (VAS) score was used to assess postoperative complications such as pain, swelling, wound opening, pus secretion, and bitter taste. There was no significant difference in bone repair between the two groups in this study (P > 0.05). Teriparatide also had no effect on the postoperative complication rate in the control group (P > 0.05). Within the limitations of the study it seems that in mandibular fractures, teriparatide did not affect bone fusion or postoperative complications, so its use is not recommended for better bone fusion and fewer postoperative complications of mandibular fracture during the first month.

A novel surgical technique in transforaminal lumbar interbody fusion by the bone graft delivery device: evaluation of therapeutic effect in patients with minimally invasive spine surgery

Background

Transforaminal Lumbar Interbody Fusion (TLIF) is commonly associated with higher complications and longer operative time. This study aims to evaluate the effectiveness, safety, and usability of a novel minimally invasive surgery (MIS) bone graft delivery device.

Methods

73 consecutive patients with lumbar spondylosis, degenerative disc disease, spondylolisthesis, scoliosis or trauma were enrolled in this randomized controlled trial. Group 1 comprised 39 patients treated with the novel MIS bone graft delivery device. Group 2 consisted of 34 patients treated with the conventional system. The primary objective of the study was the assessment of the amount of bone graft delivery using the device. The secondary objectives were the effect of the device on operative time, pain relief, disability improvement, and bone fusion grade.

Results

Bone delivery amount was significantly higher in the MIS device group (6.7 ± 2.9 mL) compared to the conventional group (2.3 ± 0.5 mL), p < 0.001. Regarding the operation time, the MIS device group was associated significantly lower duration than the conventional group (p < 0.001). After a 3-month follow-up, 39.5% of the patients in the MIS device group and 3.5% of the patients in the conventional group were observed to achieve grade I fusion (complete fusion). There was a significant difference in fusion success rates (p < 0.01).

Conclusion

The novel MIS bone graft delivery device was associated with successful bone delivery. Our MIS device provides promising modality with less operative time and higher bone fusion rates than conventional modalities.

Trial Registration This trial was retrospectively registered on ClinicalTrials.gov (Registration date: 11/19/2021; Registration number: NCT05190055).

Supplementary Information

The online version contains supplementary material available at 10.1186/s12893-022-01773-y.

Computational comparison of three different cage porosities in posterior lumbar interbody fusion with porous cage

Porous interbody cages, manufactured using additive laser melting technology, have recently been used in lumbar fusion surgery. The major advantage of a porous cage is the presence of space inside the cage for bone ingrowth. However, the biomechanical effects of different porosities on the lumbar segment with and without bone fusion (ingrowth) are still unclear. Hence, the present study aimed to compare the biomechanical responses, including the stress and range of motion (ROM) of the lumbar L3-L4 segments with three different types of porous cages along with a posterior instrument (PI) with and without bone fusion using computer simulation. A lumbar L3-L4 segment model with a PI and porous cages was used in this study. Three different porosities, namely 12.5, 41.2, and 80.84% were used. The diameter of the pores of the porous cage was uniformly set to 0.5 mm. In addition, a traditional PEEK cage was used in this study. Two different bone statuses, with and without bone fusion (ingrowth into the pores of the porous cage and the inner space of the PEEK cage), were considered. The results indicated that although the contact pressure on the bone surface reduced, the cage stress increased with increasing cage porosity. Furthermore, cage stress and contact pressure also increased in cases with bone fusion compared with those without bone fusion. The contact pressure on the bone surface with a cage porosity of 80.8% decreased by 40% (from 943.1 to 575.5 MPa), 37.7% (from 133 to 82.9 MPa), 40.4% (from 690.8 to 412 MPa), and 34.2% (from 533 to 351.1 MPa), respectively, for flexion, extension, lateral bending, and rotation, respectively, compared with that with a cage porosity of 12.5%. The rotational ROM of the PEEK cage with bone fusion was clearly larger than those of the porous cages. Porous cages have recently become popular owing to improved manufacturing technology. This study provides scientific data on the strength and weakness of porous cages with different porosities for clinical use.

Revision surgery for instrumentation failure after total en bloc spondylectomy: a retrospective case series

Background

There have been several reports of instrumentation failure after three-column resections such as total en bloc spondylectomy (TES) for spinal tumors; however, clinical outcomes of revision surgery for instrumentation failure after TES are seldom reported. Therefore, this study assessed the clinical outcomes of revision surgery for instrumentation failure after TES.

Methods

This study employed a retrospective case series in a single center and included 61 patients with spinal tumors who underwent TES between 2010 and 2015 and were followed up for > 2 years. Instrumentation failure rate, back pain, neurological deterioration, ambulatory status, operation time, blood loss, complications, bone fusion after revision surgery, and re-instrumentation failure were assessed. Data were collected on back pain, neurological deterioration, ambulatory status, and management for patients with instrumentation failure, and we documented radiological bone fusion and re-instrumentation failure in cases followed up for > 2 years after revision surgery.

Results

Of the 61 patients, 26 (42.6%) experienced instrumentation failure at an average of 32 (range, 11–92) months after TES. Of these, 23 underwent revision surgery. The average operation time and intraoperative blood loss were 204 min and 97 ml, respectively. Including the six patients who were unable to walk after instrumentation failure, all patients were able to walk after revision surgery. Perioperative complications of reoperation were surgical site infection (n = 2) and delayed wound healing (n = 1). At the final follow-up, bone fusion was observed in all patients. No re-instrumentation failure was recorded.

Conclusion

Bone fusion was achieved by revision surgery using the posterior approach alone.

Application of Laminoplasty Combined with ARCH Plate in the Treatment of Lumbar Intraspinal Tumors

Objective

To investigate the bone fusion and clinical effect of laminoplasty combined with ARCH plate fixation in the treatment of lumbar intraspinal tumors.

Methods

This was a clinical study. From June 2017 to January 2019, 24 patients (seven males and 17 females, average age 40 ± 16 years) with lumbar intraspinal tumors underwent laminoplasty combined with ARCH plate fixation in our hospital. The bone fusion was evaluated by X‐ray and computed tomography (CT) scans that were taken 15.2 ± 2.17 months postoperatively. Each segment showed a bone bridge on one side, which was classified as “segmental partial fusion.” Each segment showed bilateral bone bridges, which were classified as “segmental complete fusion”. When all segments of the patient showed bilateral bone bridging so that the replanted lamina and the host lamina became a unit on the CT scan, it was defined as “complete fusion”. In addition, the operation time and blood loss were recorded. Fisher's exact test was used to analyze the potential influencing factors of bone healing, including age (≤40 years vs >40 years), gender, number of operated levels (single vs two). Paired t‐test was used to analyze pre‐ and postoperative Oswestry Disability Index (ODI) scale and low back and leg pain visual analog scale (VAS).

Results

A total of 33 segments of laminoplasty were successfully performed in 24 patients. The average operation time was 128 ± 18 minutes. The average blood loss was 110 ± 19 mL. All patients were followed up at least 12 months after operation (average, 15.2 ± 2.17 months). At the final follow‐up, according to the definition of this study, the proportion of “segmental partial fusion” and “segmental complete fusion” were 30.3% (10/33) and 69.7% (23/33), respectively. And the proportion of patients with “complete fusion” was 70.8% (17/24). Age, gender, and number of operated levels were not associated with the fusion (P = 1.0, 0.37, and 0.06, respectively). ODI and VAS were much better at 1 month after operation and the final follow‐up than those before the operation (P < 0.01). At 6 months after operation, the results of magnetic resonance imaging (MRI) showed that the supraspinous ligament was repaired, and there were no complications, such as spinal epidural scar recompression.

Conclusions

Laminoplasty combined with ARCH plate was a better surgical method, and 70.8% of the patients showed complete bone fusion and there was no case of bilateral nonunion.

Activin A and BMP chimera (AB204) induced bone fusion in osteoporotic spine using an ovariectomized rat model

BACKGROUND CONTEXT

Recombinant human bone morphogenic protein 2 (rhBMP2) has been used to induce bone fusion in patients with spinal fusion surgery. However, the effectiveness of rhBMP2 in the bone fusion process is limited in osteoporosis patients, and a high dose of rhBMP2 for enough bone fusion sometimes provokes side effects. Therefore, substitutes for rhBMP2 with a higher therapeutic potency are needed, and already several studies have published the effectiveness of Activin A/BMP2 chimera (AB204) in new bone formation process in vitro and in vivo.

PURPOSE

In the present study, we provide evidence that bone fusion activity of AB204 is superior to that of rhBMP2 in osteoporotic rat models.

STUDY DESIGN/SETTINGS

An in vivo animal study was carried out.

METHODS

A total of 40 Sprague-Dawley rats underwent bilateral ovariectomy. At 6 weeks after ovariectomy, a lumbar spinal bone fusion model of bilateral intertransverse process was performed. All rats were randomly divided into four groups as follows: rats receiving 5 µg of rhBMP2 (Group I), rats receiving 10 µg of rhBMP2 (Group II), rats receiving 5 µg of AB204 (Group III), and rats receiving 10 µg of AB204 (Group IV). Simple radiographs were performed at 6 and 12 weeks after bone fusion, and direct palpation, micro-CT, and immunohistochemistry (hematoxylin-eosin stain and Masson's trichrome stain) were performed at 12 weeks after bone fusion. The qualitative degree of bone fusion was assessed as manual fusion score from direct palpation, and radio-histologic fusion score from simple radiographs, micro-CT, and immunohistochemistry. Also, the quantitative degree of bone fusion was assessed using fusion bone volume by micro-CT and serum osteocalcin level as bone turnover markers.

RESULTS

The change of body weight was not different among the groups during follow-up. The qualitative degree of bone fusion assessed by direct palpation, simple radiographs, micro-CT, and histologic evaluation was significantly different among the four groups. Also, the quantitative degree of bone fusion including fusion bone volume and serum osteocalcin was significantly different among the groups. Especially, in manual fusion score, radio-histologic fusion score, and fusion bone volume, the AB204 group revealed superior results to the rhBMP2 group when using the same dose. Furthermore, even the low-dose AB204 group (Group III) showed superior results to the high-dose rhBMP2 group (Group II) in radio-histologic fusion score and fusion bone volume.

CONCLUSION

The effect of bone fusion in osteoporotic rats was significantly higher in the AB204 group than in the rhBMP2 group.

CLINICAL SIGNIFICANCE

If further organized animal studies and clinical trials are provided, AB204 may be a good substitute for rhBMP2 in osteoporotic spinal fusion surgery, as a superior osteogenesis inducer.

Fusion rates support wired allograft combined with instrumented craniocervical fixation in the paediatric population

Background

Occipitocervical and atlantoaxial instability in the pediatric population is a rare and challenging condition to treat. Variable surgical techniques have been employed to achieve fusion. The study aimed to assess bony fusion with rigid craniocervical fixation using an allograft bone block to serve as scaffold for bony fusion.

Methods

This is a single center case series from a tertiary referral neurosurgical center. The series includes 12 consecutive pediatric patients with rigid craniocervical fusion between 2006 and 2014. The primary outcome was bony fusion as assessed by computed tomography and flexion-extension radiographs. The authors did not receive external funding for this study.

Results

Twelve patients (age 1–15 years) were operated with a median imaging follow-up time of 22 months (range 6–69 m). A modified Gallie fusion technique with a tightly wired allograft bone block was used in 10 of 13 procedures. One patient underwent re-fixation due to screw breakage. Eleven out of 13 procedures resulted in a stable construct with bony fusion. All 10 patients operated with the modified Gallie fusion technique with sublaminar wiring of allograft bone block had bony fusion. No post-operative complications of the posterior fixation procedure were noted.

Conclusions

The modified Gallie fusion technique with allograft bone block without post-operative immobilization achieved excellent fusion. We conclude there is no need to use autograft or BMPs in craniocervical fusion in the pediatric population, which avoids related donor-site morbidity.

Level of evidence

Level IV—case series; therapeutic.

Effects of transverse connector on reduction and fixation of atlantoaxial dislocation and basilar invagination using posterior C1-C2 screw-rod technique

BACKGROUND CONTEXT

The mechanical strength provided by internal fixation is crucial for maintaining reduction and facilitating bony fusion. Though satisfactory results with the C1-C2 technique have been acquired in most clinical reports, the related problems of fusion delay and pseudarthrosis still exist. To increase the chance of bony fusion, a transverse connector (TC) is frequently used to augment torsional stiffness of thoracolumbar screw/rod constructs. Nevertheless, the clinical implication of TC in the management of atlantoaxial dislocation (AAD) and basilar invagination (BI) remains largely unknown.

PURPOSE

To evaluate the effects of TC application on C1-C2 screw-rod constructs based on consecutive adult patients with AAD and BI in a single institution over a 10-year period.

STUDY DESIGN

A retrospective study.

PATIENT SAMPLE

Patients with AAD and BI, who were treated with posterior C1-C2 screw-rod technique with or without TC usage from June 2007 to June 2017 at a single institution.

OUTCOME MEASURES

The radiological measurements included the anterior atlantodental interval (AADI), posterior atlantodental interval (PADI), height of odontoid process above Chamberlain line, and cervicomedullary angle (CMA). Patients' neurologic status was evaluated with the Japanese Orthopaedic Association (JOA) score. Fusion status was evaluated at different follow-up periods.

METHODS

We compared the difference of clinical, radiological, and surgical outcomes between the TC and NTC groups postoperatively.

RESULTS

In total, there were 149 consecutive patients in the TC group and 168 patients in the NTC group. On average, 1.2 TCs per patient were used in the TC group. No significant differences were identified for operative time and blood loss between groups. There was also no statistical difference in the radiological measurements of AADI, PADI, Chamberlain line, and CMA between the TC and NTC groups preoperatively and postoperatively. A significantly higher JOA score was obtained in the TC group than that in the NTC group postoperatively. The fusion rates were higher in the TC group than those in the NCT group at the early stage postoperatively (3 and 6 months; p<.01).

CONCLUSIONS

Use of TCs seems to improve bony fusion and neurologic outcomes in the treatment of AAD and BI with C1-C2 screw-rod technique.

Clinical outcomes of posterior thoracic cage interbody fusion (PTCIF) to treat trauma and degenerative disease of the thoracic and thoracolumbar junctional spine

Laminectomy followed by posterolateral fusion (PLF) is a standard procedure for thoracic and thoracolumbar (TL) compressive lesions. However, it is challenging to apply sufficient bone chips as the spinal cord is exposed after the laminectomy. Therefore, we performed posterior thoracic cage interbody fusion (PTCIF) as an alternative technique. A total of 25 patients operated with PTCIF technique between 2012 and 2017 were analyzed in our study. These patients required a posterior decompression and fusion in thoracic and TL spine for traumatic injury or degenerative disease. To evaluate the outcome of bone fusion, computed tomography (CT) was performed at least 3-4 months after PTCIF. The surgery was performed through insertion of screws and cages packed with autologous bone chips in a similar fashion to the posterior lumbar interbody fusion technique. Among 25 patients who underwent PTCIF, 22 patients were involved in our study. The mean age and follow-up interval were 58.6 (28-78) years and 27.1 (6-60) months, respectively. Traumatic spinal injury was diagnosed in 6 patients and degenerative disease in 16 patients. One level PTCIF was performed in 12 patients and 2 levels in 8 patients. After the operation, patients with degenerative disease showed neurological improvement, and trauma cases showed no neurological aggravation. Successful bone fusion was confirmed on CT for all patients. PTCIF is an effective treatment thereby we suggest this approach to be considered as an alternative procedure to decompression and fusion surgery in the thoracic and TL spine.

Ketogenic diet delays spinal fusion and decreases bone mass in posterolateral lumbar spinal fusion: an in vivo rat model

BACKGROUND

Ketogenic diet (KD), a low-carbohydrate-and-high-fat diet, causes a metabolic state of ketogenesis and has been used to treat drug-resistance epilepsy. Our recent studies showed KD neuroprotective after spinal cord injury and causing bone loss. Effects of KD on spinal fusion were still unknown. This study was aimed to evaluate effects of KD on spinal fusion in rats.

METHODS

Thirty-two Sprague-Dawley rats were randomly divided into KD and standard diet (SD) groups. The KD group was fed with food of 1:4 carbohydrates to fat. All rats were subjected to L4/5 posterolateral lumbar spinal fusion. The blood ketone, and serum calcium, phosphorus, and insulin-like growth factor-1 (IGF-1) were measured, as well as the fusion rates, bone mass (BV), and bone mineral contents (BMC) of fusion sites were estimated at 4 and 8 weeks.

RESULTS

There was no significant difference in serum calcium or phosphorus levels between groups at 4 or 8 weeks. However, there was a significant increase of blood ketone (1.02 mmol/L vs 0.38 mmol/L at 4 weeks; 0.83 mmol/L vs 0.32 mmol/L, at 8 weeks) and decrease of serum IGF-1 (339.4 ng/mL vs 630.6 ng/mL at 4 weeks; 418.8 ng/mL vs 628.6 ng/mL, at 8 weeks) in the KD group compared with the SD group. The spinal fusion occurred less in the KD group (1/16 vs 6/16 at 4 weeks; 7/16 vs 10/16, at 8 weeks), particularly at 4 weeks after surgery. The BV and BMC were lower in the KD group than that in the SD group at 4 weeks, but not different between groups at 8 weeks.

CONCLUSIONS

This study demonstrated that KD delayed spinal fusion and decreased bone mass in posterolateral lumbar spinal fusion in rats.

Vertebral body replacement using patient-specific three-dimensional-printed polymer implants in cervical spondylotic myelopathy: an encouraging preliminary report

BACKGROUND CONTEXT

Resulting from recent studies that suggest a benefit of implant design on the achievement of fusion and stability in cervical spinal disease management, manufacturing development has increased over the past years. This article attempts to describe how the development of patient-specific implants, which are used during the procedures of anterior cervical corpectomy and vertebral body replacement (VBR), impacts the outcomes of cervical spondylotic myelopathy (CSM) management.

MATERIALS AND METHODS

This prospective clinical study included six patients who were implanted with patient-specific VBR for single-level or multilevel CSM. The following clinical scores were collected: visual analog scale (VAS), modified Japanese Orthopaedic Association (mJOA), Neck Dysfunction Index (NDI), and European myelopathy score (EMS), along with radiological measurements.

RESULTS

Six patients reached a mean follow-up date of 21months (12-24). Angle measurements remained constant during follow-up, including the C2-C7 Cobb angle and the corpectomy Cobb angle. Furthermore, no deformations, such as hyperlordosis or kyphosis, were detected. The anterior height (Ha) and the posterior height (Hp) of the corpectomy segment remained constant (ratio close to 1) with no severe subsidence (>3 mm) at the last follow-up. No height differences were detected between the preoperative and the last follow-up dates, neither for the upper Hp and Ha (0.97±0.09 and 1.00±0.06, respectively) nor for the lower adjacent vertebrate Hp and Ha (0.96±0.04 and 1.02±0.12). The mean mJOA and EMS recovery rates were 60.4% (standard deviation [SD] 20.4) and 77.0% (SD 29.7), respectively, at last the follow-up. An EMS of at least 16 of 18 was observed in 83% (5 of 6) of the patients. We recorded a preoperative NDI score at 47.1% (SD 18.6) that improved to 11.2% (SD 4.1) at the last follow-up (p<.01). The preoperative VAS neck (6.3, range 4-7) and the VAS arm (6.1, range 3- 9) scores improved to 1.3 (range 0-3) and 2.8 (range 0-5), respectively, at the last follow-up.

CONCLUSIONS

This preliminary report suggests a possible benefit of the use of patient-specific implants in CSM treatment. The favorable clinical and radiological outcomes were associated with a correct achievement rate; these are promising elements toward the development of the concept of personalized therapy. Nonetheless, these encouraging results have to be confirmed now with a longer follow-up and a larger cohort.

The temporal expression of adipokines during spinal fusion

BACKGROUND CONTEXT

Adipokines are secreted by white adipose tissue and have been associated with fracture healing. Our goal was to report the temporal expression of adipokines during spinal fusion in an established rabbit model.

PURPOSE

Our goal was to report the temporal expression of adipokines during spinal fusion in an established rabbit model.

STUDY DESIGN

The study design included a laboratory animal model.

METHODS

New Zealand white rabbits were assigned to either sham surgery (n=2), unilateral posterior spinal fusion (n=14), or bilateral posterior spinal fusion (n=14). Rabbits were euthanized 1-6 and 10 weeks out from surgery. Fusion was evaluated by radiographs, manual palpation, and histology. Reverse transcription-polymerase chain reaction on the bone fusion mass catalogued the gene expression of leptin, adiponectin, resistin, and vascular endothelial growth factor (VEGF) at each time point. Results were normalized to the internal control gene, glyceraldehyde-3-phosphate dehydrogenase (GAPDH) (2^ΔCt), and control bone sites (2^ΔΔCt). Quantitative data were analyzed by two-factor analysis of variance (p<.05).

RESULTS

Manual palpation scores, radiograph scores, and histologic findings showed progression of boney fusion over time (p<.0003). The frequency of fusion by palpation after 4 weeks was 68.75%. Leptin expression in decortication and bone graft sites peaked at 5 weeks after the fusion procedure (p=.0143), adiponectin expression was greatest 1 week after surgery (p<.001), VEGF expression peaked at 4 weeks just after initial increases in leptin expression (p<.001), and resistin decreased precipitously 1 week after the fusion procedure (p<.001).

CONCLUSIONS

Leptin expression is likely associated with the maturation phase of bone fusion. Adiponectin and resistin may play a role early on during the fusion process. Our results suggest that leptin expression may be upstream of VEGF expression during spinal fusion, and both appear to play an important role in bone spinal fusion.

The Therapeutic Effects of Combination Therapy with Curcumin and Alendronate on Spine Fusion Surgery in the Ovariectomized Rats

Objective

The purpose of this study was to evaluate the therapeutic effects of combination therapy with curcumin and alendronate on spine fusion surgery in ovariectomized rats.

Methods

Thirty-two female Sprague-Dawley rats (12 weeks old) underwent bilateral ovariectomy (OVX). Eight weeks after surgery, animals underwent intertransverse spine fusion at L4–5. The rats were randomly distributed amongst 4 groups; untreated OVX group, curcumin administered group, alendronate administered group, and the combination therapy group. At 8 weeks after fusion surgery, the animals were sacrificed and the fusion mass was assessed by manual palpation, radiographic scan, and micro-computed tomographic scan. In addition, mechanical strength was determined by a 3-point bending test.

Results

Based on the results of manual palpation testing and 3-dimensional micro-computed tomography scanning, solid bone fusion rate was 50% (4 of 8) in the OVX group, 75% (6 of 8) in the alendronate-only and curcumin-only group, and 87.5% (7 of 8) in the combination therapy group, respectively. The combination therapy group had a higher fusion rate compared with the other treatment groups, though not statistically significantly (p>0.05). And the combination therapy group had a significant increase in fusion volume at 8 weeks after spine fusion surgery compared with curcumin-only group (p=0.039). The 3-point bending test showed that combination therapy group had a significantly greater maximal load value compared to that of curcumin-only group (p=0.024).

Conclusion

The present study demonstrated that additional treatment of curcumin and alendronate after spine fusion surgery in rat can promote higher fusion volume, and improve bone mechanical strength.

Anterior cervical interbody fusion using polyetheretherketone cage filled with synthetic bone graft in acute cervical spine injury

PURPOSE

The aim of this study was to assess the interbody fusion rate for patients treated by anterior cervical interbody fusion (ACIF) using polyetheretherketone (PEEK) cages filled with synthetic bone graft in acute cervical spine injury.

MATERIALS AND METHODS

Twenty-nine patients (mean age: 49 years) with monosegmental instability due to cervical spine injury were followed. We assessed the rate of and time to interbody fusion at 1-year follow-up. In case of secondary displacement, we analysed its causes and surgical management.

RESULTS

The rate of fusion was 86.2%. The mean time to fusion was 7.2 months. Interbody fusion was observed at 3 months in 4 patients, at 6 months in 14 and at 1 year in 7. Four patients had secondary displacement within 3 months.

CONCLUSION

ACIF with a PEEK cage filled with synthetic bone graft seems to be an alternative to iliac crest bone graft with no morbidity related to the harvest site.

Comparison of Transarticular Screw Fixation and C1 Lateral Mass-C2 Pedicle Screw Fixation in Patients with Rheumatoid Arthritis with Atlantoaxial Instability

BACKGROUND

Many surgical procedures have been introduced to manage atlantoaxial instability caused by rheumatoid arthritis (RA) to prevent complications and improve fusion rate. We report the surgical outcome between transarticular screw fixation (TAF) and C1 lateral mass-C2 pedicle screw fixation (C1LM-C2P) in patients with atlantoaxial instability from RA.

METHODS

Between 2002 and 2012, 58 patients were enrolled in the study. According to surgical procedures, patients were divided into 2 groups: group I who received TAF (n = 33) and group II who received C1LM-C2P (n = 25). Bony fusion was assessed by radiologic comparison immediately after the operation and 1 year postoperatively. In addition, complications and clinical and functional outcomes were evaluated.

RESULTS

Overall, bone fusion was achieved in 32 patients in group I (97%). In group II, the fusion rate was evaluated in 100% of patients. Complications (regardless of neurologic deterioration) were cable loosening and screw malposition in group I and violation into the vertebral canal and spinal canal in group II. There was no statistical significance in fusion rate, clinical outcomes, or complications. The 12-month atlantodental interval after operation for the C1LM-C2P group was significantly lower than that for the TAF group after adjusting for all variables.

CONCLUSIONS

Two surgical techniques showed a good fusion rate by rigid fixation in the immediate postoperative period and fewer surgery-related complications in patients with RA. Because surgical complications are more likely during the learning curve (as with other surgical techniques), surgeons should carefully evaluate patients before surgery by radiologic and neurologic examinations.

The Effect of Perioperative Radiation Therapy on Spinal Bone Fusion Following Spine Tumor Surgery

Introduction

Perioperative irradiation is often combined with spine tumor surgery. Radiation is known to be detrimental to healing process of bone fusion. We tried to investigate bone fusion rate in spine tumor surgery cases with perioperative radiation therapy (RT) and to analyze significant factors affecting successful bone fusion.

Methods

Study cohort was 33 patients who underwent spinal tumor resection and bone graft surgery combined with perioperative RT. Their medical records and radiological data were analyzed retrospectively. The analyzed factors were surgical approach, location of bone graft (anterior vs. posterior), kind of graft (autologous graft vs. allograft), timing of RT (preoperative vs. postoperative), interval of RT from operation in cases of postoperative RT (within 1 month vs. after 1 month) radiation dose (above 38 Gy vs. below 38 Gy) and type of radiation therapy (conventional RT vs. stereotactic radiosurgery). The bone fusion was determined on computed tomography images.

Result

Bone fusion was identified in 19 cases (57%). The only significant factors to affect bony fusion was the kind of graft (75% in autograft vs. 41 in allograft, p=0.049). Other factors proved to be insignificant relating to postoperative bone fusion. Regarding time interval of RT and operation in cases of postoperative RT, the time interval was not significant (p=0.101).

Conclusion

Spinal fusion surgery which was combined with perioperative RT showed relatively low bone fusion rate (57%). For successful bone fusion, the selection of bone graft was the most important.

Repeated complication following atlantoaxial fusion: a case report

A patients with atlantoaixial instability and osodontoideum underwent atlantoaixial fusion (Harms and Melcher technique) with demineralized bone matrix. But, unfortunately, the both pedicle screws in C2 were fractured within 9 weeks follow-up periods after several suspected episode of neck hyper-flexion. Fractured screws were not contact to occipital bone in several imaging studies, but it could irritate the occipital bone when neck extension because the relatively close distance between the occipital bone and C1 posterior arch. The patient underwent revision operation with translaminar screw fixation with autologus iliac bone graft. Postsurgical course were uneventful except donor site pain, but the bony fusion was not satisfied after 4 months follow-up. The patient re-underwent revision operation in other hospital. Continuous complication after atlantoaixial fusion is rare, but the clinical course could be unlucky to patients. Postoperative immobilization could be important to prevent the unintended clinical course of patients.

Basic research on a cylindrical implant made of shape-memory alloy for the treatment of long bone fracture

The internal fixing materials made from shape-memory alloys (SMAs) have recently been reported for long bone fracture. We present a new internal fixation technique using a cylindrical SMAs implant in a rat femoral fracture healing. The implant was designed in a shape to circumferentially fix the fractured bone using resilient SMA claws. To evaluate the fixing ability of the implant, three-point bending and rotation tests were performed. Fifteen female Wister rats were treated surgically as an experimental model. All rats were killed at 16 weeks postoperatively, and the radiological and histological evaluations were performed. In biomechanical test, the good fixation ability of the implant was demonstrated. In animal model, no cases of postoperative infection or death were encountered and postoperative gait was stable in all cases. Radiological examination at 16 weeks postoperatively demonstrated the implant firmly fixed to the fractured part, endosteal healing, and no callus formation in all cases. In Histological evaluation, bone union in all cases was characterized by endochondral ossification from within the medullary cavity. In conclusion, our cylindrical SMA implant provided good fixation in biomechanical tests, and achieved bone union in all 15 rats. If a larger size is designed in the future, our implant will be a clinically applicable, useful fixing material for fracture of the human long bones.

Short Segment Screw Fixation without Fusion for Unstable Thoracolumbar and Lumbar Burst Fracture : A Prospective Study on Selective Consecutive Patients

Objective

The purpose of this prospective study was to evaluate the efficacy and safety of screw fixation without bone fusion for unstable thoracolumbar and lumbar burst fracture.

Methods

Nine patients younger than 40 years underwent screw fixation without bone fusion, following postural reduction using a soft roll at the involved vertebra, in cases of burst fracture. Their motor power was intact in spite of severe canal compromise. The surgical procedure included postural reduction for 3 days and screw fixations at one level above, one level below and at the fractured level itself. The patients underwent removal of implants 12 months after the initial operation, due to possibility of implant failure. Imaging and clinical findings, including canal encroachment, vertebral height, clinical outcome, and complications were analyzed.

Results

Prior to surgery, the mean pain score (visual analogue scale) was 8.2, which decreased to 2.2 at 12 months after screw fixation. None of the patients complained of worsening of pain during 6 months after implant removal. All patients were graded as having excellent or good outcomes at 6 months after implant removal. The proportion of canal compromise at the fractured level improved from 55% to 35% at 12 months after surgery. The mean preoperative vertebral height loss was 45.3%, which improved to 20.6% at 6 months after implant removal. There were no neurological deficits related to neural injury. The improved vertebral height and canal compromise were maintained at 6 months after implant removal.

Conclusion

Short segment pedicle screw fixation, including fractured level itself, without bone fusion following postural reduction can be an effective and safe operative technique in the management of selected young patients suffering from unstable burst fracture.