Molecular diagnostics of infectious diseases

Plasmonic Optical Wells-Based Enhanced Rate PCR

Rapid, sensitive, inexpensive point-of-care molecular diagnostics are crucial for the efficient control of spreading viral diseases and biosecurity of global health. However, the gold standard, polymerase chain reaction (PCR) is time-consuming and expensive and needs specialized testing laboratories. Here, we report a low-cost yet fast, selective, and sensitive Plasmonic Optical Wells-Based Enhanced Rate PCR: POWER-PCR. We optimized the efficient optofluidic design of 3D plasmonic optical wells via the computational simulation of light-to-heat conversion and thermophoretic convection in a self-created plasmonic cavity. The POWER-PCR chamber with a self-passivation layer can concentrate incident light to accumulate molecules, generate rapid heat transfer and thermophoretic flow, and minimize the quenching effect on the naked Au surface. Notably, we achieved swift photothermal cycling of nucleic acid amplification in POWER-PCR on-a-chip in 4 min 24 s. The POWER-PCR will provide an excellent solution for affordable and sensitive molecular diagnostics for precision medicine and preventive global healthcare.

Detecting Pathogen Exposure During the Non-symptomatic Incubation Period Using Physiological Data: Proof of Concept in Non-human Primates

Background and Objectives: Early warning of bacterial and viral infection, prior to the development of overt clinical symptoms, allows not only for improved patient care and outcomes but also enables faster implementation of public health measures (patient isolation and contact tracing). Our primary objectives in this effort are 3-fold. First, we seek to determine the upper limits of early warning detection through physiological measurements. Second, we investigate whether the detected physiological response is specific to the pathogen. Third, we explore the feasibility of extending early warning detection with wearable devices. Research Methods: For the first objective, we developed a supervised random forest algorithm to detect pathogen exposure in the asymptomatic period prior to overt symptoms (fever). We used high-resolution physiological telemetry data (aortic blood pressure, intrathoracic pressure, electrocardiograms, and core temperature) from non-human primate animal models exposed to two viral pathogens: Ebola and Marburg (N = 20). Second, to determine reusability across different pathogens, we evaluated our algorithm against three independent physiological datasets from non-human primate models (N = 13) exposed to three different pathogens: Lassa and Nipah viruses and Y. pestis. For the third objective, we evaluated performance degradation when the algorithm was restricted to features derived from electrocardiogram (ECG) waveforms to emulate data from a non-invasive wearable device. Results: First, our cross-validated random forest classifier provides a mean early warning of 51 ± 12 h, with an area under the receiver-operating characteristic curve (AUC) of 0.93 ± 0.01. Second, our algorithm achieved comparable performance when applied to datasets from different pathogen exposures - a mean early warning of 51 ± 14 h and AUC of 0.95 ± 0.01. Last, with a degraded feature set derived solely from ECG, we observed minimal degradation - a mean early warning of 46 ± 14 h and AUC of 0.91 ± 0.001. Conclusion: Under controlled experimental conditions, physiological measurements can provide over 2 days of early warning with high AUC. Deviations in physiological signals following exposure to a pathogen are due to the underlying host's immunological response and are not specific to the pathogen. Pre-symptomatic detection is strong even when features are limited to ECG-derivatives, suggesting that this approach may translate to non-invasive wearable devices.

Rapidly Fatal Postlaparoscopic Liver Infection from the Rarely Isolated Species Clostridium butyricum

We report a case of a rapidly fatal postlaparoscopic cholecystectomy liver infection from the rarely isolated species Clostridium butyricum. Liver examination at autopsy showed cystic spaces, necrosis, and spore-forming Gram-positive rods. 16sRNA gene sequencing of the cystic liver tissue identified the organism as C. butyricum.

Molecular detection of Trichostrongylus species through PCR followed by high resolution melt analysis of ITS-2 rDNA sequences

Polymerase chain reaction followed by high resolution melting (PCR-HRM) analysis is a simple, rapid and accurate method for molecular detection of various nematode species. The objective of the present study was, for the first time, to develop a PCR-HRM assay for the detection of various animal Trichostrongylus spp. A pair of primers targeting the ITS-2 rDNA region of the Trichostrongylus spp. was designed for the development of the HRM assay. DNA samples were extracted from 30 adult worms of Trichostrongylus spp., the ITS-2-rDNA region was amplified using PCR, and the resultant products were sequenced and characterized. Afterwards, the PCR-HRM analysis was conducted to detect and discriminate Trichostrongylus spp. Molecular sequence analysis revealed that 24, 4, and 1 of the samples were T. colubriformis, T. vitrinus and T. capricola, respectively. Results from PCR-HRM indicated that complete agreement was relatively found between speciation by HRM analysis and DNA sequencing for the detection of Trichostrongylus species. The PCR-HRM analysis method developed in the present study is fast and low-cost; the method can be comparable with other molecular detection techniques, representing a reliable tool for the identification of various species within the Trichostrongylus genus.

Laboratory-Based and Point-of-Care Testing for MSSA/MRSA Detection in the Age of Whole Genome Sequencing

Staphylococcus aureus is an opportunistic pathogen of animals and humans that is capable of both colonizing and infecting its eukaryotic host. It is frequently detected in the clinical microbiology routine laboratory. S. aureus is capable of acquiring antibiotic resistance traits with ease and, given its rapid global dissemination, resistance to meticillin in S. aureus has received extensive coverage in the popular and medical press. The detection of meticillin-resistant versus meticillin-susceptible S. aureus (MRSA and MSSA) is of significant clinical importance. Detection of meticillin resistance is relatively straightforward since it is defined by a single determinant, penicillin-binding protein 2a', which exists in a limited number of genetic variants carried on various Staphylococcal Cassette Chromosomes mec. Diagnosis of MRSA and MSSA has evolved significantly over the past decades and there has been a strong shift from culture-based, phenotypic methods toward molecular detection, especially given the close correlation between the presence of the mec genes and phenotypic resistance. This brief review summarizes the current state of affairs concerning the mostly polymerase chain reaction-mediated detection of MRSA and MSSA in either the classical laboratory setting or at the point of care. The potential diagnostic impact of the currently emerging whole genome sequencing (WGS) technology will be discussed against a background of diagnostic, surveillance, and infection control parameters. Adequate detection of MSSA and MRSA is at the basis of any subsequent, more generic antibiotic susceptibility testing, epidemiological characterization, and detection of virulence factors, whether performed with classical technology or WGS analyses.

Recent Advances in Molecular Diagnosis of Pseudomonasaeruginosa Infection by State-of-the-Art Genotyping Techniques

Pseudomonas aeruginosa is a rod-shaped Gram-negative bacterium which is notably known as a pathogen in humans, animals, and plants. Infections caused by P. aeruginosa especially in hospitalized patients are often life-threatening and rapidly increasing worldwide throughout the years. Recently, multidrug-resistant P. aeruginosa has taken a toll on humans' health due to the inefficiency of antimicrobial agents. Therefore, the rapid and advanced diagnostic techniques to accurately detect this bacterium particularly in clinical samples are indeed necessary to ensure timely and effective treatments and to prevent outbreaks. This review aims to discuss most recent of state-of-the-art molecular diagnostic techniques enabling fast and accurate detection and identification of P. aeruginosa based on well-developed genotyping techniques, e.g., polymerase chain reaction, pulse-field gel electrophoresis, and next generation sequencing. The advantages and limitations of each of the methods are also reviewed.

Detection of 16S rRNA and KPC Genes from Complex Matrix Utilizing a Molecular Inversion Probe Assay for Next-Generation Sequencing

Targeted sequencing promises to bring next-generation sequencing (NGS) into routine clinical use for infectious disease diagnostics. In this context, upfront processing techniques, including pathogen signature enrichment, must amplify multiple targets of interest for NGS to be relevant when applied to patient samples with limited volumes. Here, we demonstrate an optimized molecular inversion probe (MIP) assay targeting multiple variable regions within the 16S ribosomal gene for the identification of biothreat and ESKAPE pathogens in a process that significantly reduces complexity, labor, and processing time. Probes targeting the Klebsiella pneumoniae carbapenemase (KPC) antibiotic resistance (AR) gene were also included to demonstrate the ability to concurrently identify etiologic agent and ascertain valuable secondary genetic information. Our assay captured gene sequences in 100% of mock clinical samples prepared from flagged positive blood culture bottles. Using a simplified processing and adjudication method for mapped sequencing reads, genus and species level concordance was 100% and 80%, respectively. In addition, sensitivity and specificity for KPC gene detection was 100%. Our MIP assay produced sequenceable amplicons for the identification of etiologic agents and the detection of AR genes directly from blood culture bottles in a simplified single tube assay.

Assessment of Real-Time Polymerase Chain Reaction for the Detection of Trichostrongylus spp. DNA from Human Fecal Samples

Sporadic cases of Tricostrongylosis are reported in humans. Diagnosis of enteric Trichostrongylus relies primarily on coproscopic analysis but morphological identification is difficult because of similarity among nematode species. The method is time consuming and requires some expertise. To overcome these limitations, we developed a molecular approach by real-time polymerase chain reaction (PCR) to provide a rapid, specific, and sensitive tool to detect Trichostrongylus spp. in human feces. We designed primers and probe specific for Trichostrongylus rDNA region 5.8S and internal transcribed spacer 2. Three Italian family clusters were analyzed and DNA sequencing was performed to confirm real-time PCR results comparing with known GenBank sequence data. Sequence analysis showed ≥ 99% identity to Trichostrongylus colubriformis and Trichostrongylus axei. This study provides a molecular methodology suitable for fast and specific detection of Trichostrongylus in fecal specimens and to distinguish the zoonotic species.

Molecular Biology Can Change the Classic Laboratory Approach for Intestinal Protozoan Infections

For many years microscopy has been considered the mainstay of the diagnosis of parasitic infections. In our laboratory, before the advent of molecular biology, the approach for the identification of parasitic infections in stools was the microscopic exam of three samples. Once we adopted molecular biology, a real-time PCR on one single sample was added to the classical coproparasitological exam of three samples. Given the high sensitivity of real-time PCR (Rt-PCR), we then decided to evaluate if a change of our routine was justified. In detail, we intended to assess if a much more practical routine, based on the analysis of a single fecal sample, was sufficiently sensitive to replace the routine described above. The new approach to be evaluated included, on the same and unique fecal sample, a classical coproparasitological exam plus Rt-PCR. The data obtained showed that the sensitivity of the new proposed approach remains very high, despite the reduction of coproparasitological exams from three to one, with the advantage of reducing costs and saving time, both for patients and for the laboratory.

Microbiological diagnosis of device-related biofilm infections

Medical device-related infections cause undue patient distress, increased morbidity and mortality and pose a huge financial burden on healthcare services. The pathogens are frequently distributed heterogeneously in biofilms, which can persist without being effectively cleared by host immune defenses and antibiotic therapy. At present, there is no 'gold standard' available to reveal the presence of device-related biofilm infections. However, adequate sample collection and logistics, standardised diagnostic methods, and interpretation of results by experienced personnel are important steps in efficient diagnosis and treatment of these infections. The focus of this mini review is on prosthethic joint and cardiovascular implantable device infections, which exemplify permanent devices that are placed in a sterile body site. These device-related infections represent some of the most challenging in terms of both diagnosis and treatment.

Emerging and Neglected Infectious Diseases: Insights, Advances, and Challenges

Infectious diseases are a significant burden on public health and economic stability of societies all over the world. They have for centuries been among the leading causes of death and disability and presented growing challenges to health security and human progress. The threat posed by infectious diseases is further deepened by the continued emergence of new, unrecognized, and old infectious disease epidemics of global impact. Over the past three and half decades at least 30 new infectious agents affecting humans have emerged, most of which are zoonotic and their origins have been shown to correlate significantly with socioeconomic, environmental, and ecological factors. As these factors continue to increase, putting people in increased contact with the disease causing pathogens, there is concern that infectious diseases may continue to present a formidable challenge. Constant awareness and pursuance of effective strategies for controlling infectious diseases and disease emergence thus remain crucial. This review presents current updates on emerging and neglected infectious diseases and highlights the scope, dynamics, and advances in infectious disease management with particular focus on WHO top priority emerging infectious diseases (EIDs) and neglected tropical infectious diseases.

Nano-Au/cMWCNT Modified speB Gene Specific Amperometric Sensor for Rapidly Detecting Streptococcus pyogenes causing Rheumatic Heart Disease

A specific 5' NH₂ labeled DNA probe of speB gene was immobilized onto the gold nanoparticles/carboxylated multi walled carbon nanotubes (Nano-Au/cMWCNT) screen printed electrode using EDC/NHS cross linking chemistry. This was followed by hybridization with 0.5-50 ng/6 µl of single stranded genomic DNA Streptococcus pyogenes infected patient throat swab samples. Electrochemical amperometric assay was deciphered by using cyclic voltammetry (CV) with methylene blue a redox indicator. The sensor had a sensitivity of 104.7 µA cm^-2 ng^-1 using CV with a R² of 0.907 and 0.01 ng/6 µl as the limit of detection (LOD). The modified electrode surface morphology was characterized using scanning electron microscopy. The stability of the electrode was seen at 4 °C for 180 days having 6% loss in the initial current. The sensor is speB gene specific and can detect the pathogen within 30 min.

A NASBA on microgel-tethered molecular-beacon microarray for real-time microbial molecular diagnostics

Gel-tethered molecular beacons coupled with NASBA RNA amplification enable real-time microbial detection and differentiation in a bloodstream infection model.

A modifiable microarray-based universal sensor: providing sample-to-results automation

A microfluidic system consisting of generic single use cartridges which interface with a workstation allows the automatic performance of all necessary sample preparation, PCR analysis and interpretation of multiplex PCR assays. The cartridges contain a DNA array with 20 different 16mer DNA “universal” probes immobilized at defined locations. PCR amplicons can be detected via hybridization of user-defined “reporter” probes that are complementary at their 3′ termini to one or more of the universal probes and complementary to the target amplicons at their 5′ termini. The system was able to detect single-plex and multiplex PCR amplicons from various infectious agents as well as wild type and mutant alleles of single nucleotide polymorphisms. The system's ease of use was further demonstrated by converting a published PCR assay for the detection of Mycobacterium genitalium in a fully automated manner. Excellent correlation between traditional manual methods and the automated analysis performed by the workstation suggests that the system can provide a means to easily design and implement a variety of customized PCR-based assays. The system will be useful to researchers or clinical investigators seeking to develop their own user defined assays. As the U.S. FDA continues to pursue regulatory oversight of LDTs, the system would also allow labs to continue to develop compliant assays.

Comparison of manual and automated nucleic acid extraction methods from clinical specimens for microbial diagnosis purposes

The choice of nucleic acids (NAs) extraction method for molecular diagnosis in microbiology is of major importance because of the low microbial load, different nature of microorganisms, and clinical specimens. The NA yield of different extraction methods has been mostly studied using spiked samples. However, information from real human clinical specimens is scarce. The purpose of this study was to compare the performance of a manual low-cost extraction method (Qiagen kit or salting-out extraction method) with the automated high-cost MagNAPure Compact method. According to cycle threshold values for different pathogens, MagNAPure is as efficient as Qiagen for NA extraction from noncomplex clinical specimens (nasopharyngeal swab, skin swab, plasma, respiratory specimens). In contrast, according to cycle threshold values for RNAseP, MagNAPure method may not be an appropriate method for NA extraction from blood. We believe that MagNAPure versatility reduced risk of cross-contamination and reduced hands-on time compensates its high cost.

Targeted next-generation sequencing for the detection of ciprofloxacin resistance markers using molecular inversion probes

Antibiotic resistance (AR) is an epidemic of increasing magnitude requiring rapid identification and profiling for appropriate and timely therapeutic measures and containment strategies. In this context, ciprofloxacin is part of the first-line of countermeasures against numerous high consequence bacteria. Significant resistance can occur via single nucleotide polymorphisms (SNP) and deletions within ciprofloxacin targeted genes. Ideally, use of ciprofloxacin would be prefaced with AR determination to avoid overuse or misuse of the antibiotic. Here, we describe the development and evaluation of a panel of 44 single-stranded molecular inversion probes (MIPs) coupled to next-generation sequencing (NGS) for the detection of genetic variants known to confer ciprofloxacin resistance in Bacillus anthracis, Yersinia pestis, and Francisella tularensis. Sequencing results demonstrate MIPs capture and amplify targeted regions of interest at significant levels of coverage. Depending on the genetic variant, limits of detection (LOD) for high-throughput pooled sequencing ranged from approximately 300–1800 input genome copies. LODs increased 10-fold in the presence of contaminating human genome DNA. In addition, we show that MIPs can be used as an enrichment step with high resolution melt (HRM) real-time PCR which is a sensitive assay with a rapid time-to-answer. Overall, this technology is a multiplexable upfront enrichment applicable with multiple downstream molecular assays for the detection of targeted genetic regions.

Label- and amplification-free electrochemical detection of bacterial ribosomal RNA

Current approaches to molecular diagnostics rely heavily on PCR amplification and optical detection methods which have restrictions when applied to point of care (POC) applications. Herein we describe the development of a label-free and amplification-free method of pathogen detection applied to Escherichia coli which overcomes the bottleneck of complex sample preparation and has the potential to be implemented as a rapid, cost effective test suitable for point of care use. Ribosomal RNA is naturally amplified in bacterial cells, which makes it a promising target for sensitive detection without the necessity for prior in vitro amplification. Using fluorescent microarray methods with rRNA targets from a range of pathogens, an optimal probe was selected from a pool of probe candidates identified in silico. The specificity of probes was investigated on DNA microarray using fluorescently labeled 16S rRNA target. The probe yielding highest specificity performance was evaluated in terms of sensitivity and a LOD of 20 pM was achieved on fluorescent glass microarray. This probe was transferred to an EIS end point format and specificity which correlated to microarray data was demonstrated. Excellent sensitivity was facilitated by the use of uncharged PNA probes and large 16S rRNA target and investigations resulted in an LOD of 50 pM. An alternative kinetic EIS assay format was demonstrated with which rRNA could be detected in a species specific manner within 10-40min at room temperature without wash steps.

Rapid Optical Cavity PCR

Recent outbreaks of deadly infectious diseases, such as Ebola and Middle East respiratory syndrome coronavirus, have motivated the research for accurate, rapid diagnostics that can be administered at the point of care. Nucleic acid biomarkers for these diseases can be amplified and quantified via polymerase chain reaction (PCR). In order to solve the problems of conventional PCR--speed, uniform heating and cooling, and massive metal heating blocks--an innovative optofluidic cavity PCR method using light-emitting diodes (LEDs) is accomplished. Using this device, 30 thermal cycles between 94 °C and 68 °C can be accomplished in 4 min for 1.3 μL (10 min for 10 μL). Simulation results show that temperature differences across the 750 μm thick cavity are less than 2 °C and 0.2 °C, respectively, at 94 °C and 68 °C. Nucleic acid concentrations as low as 10(-8) ng μL(-1) (2 DNA copies per μL) can be amplified with 40 PCR thermal cycles. This simple, ultrafast, precise, robust, and low-cost optofluidic cavity PCR is favorable for advanced molecular diagnostics and precision medicine. It is especially important for the development of lightweight, point-of-care devices for use in both developing and developed countries.

Biological Warfare: Infectious Disease and Bioterrorism

The term biological warfare typically conjures images of medieval warriors tossing dead cattle over city walls or clandestine government agents secretly releasing mysterious microbes into enemy territory. Of course, biological warfare does encompass such activity, but the vast majority of what constitutes biological warfare is far more mundane. Ever since life evolved on earth about 3.8 billion years ago, organisms have constantly devised new ways to kill each other. Any organism that makes use of toxins—from bacteria to snakes—is engaging in a form of biological warfare. Humans who engage in biological warfare do so by taking advantage of these toxin-producing organisms.

Molecular diagnosis of infectious diseases using cytological specimens

Pathologists have an important role in the diagnosis of infectious disease (ID). In many cases, a definitive diagnosis can be made using cytopathology alone. However, several ancillary techniques can be used on cytological material to reach a specific diagnosis by identifying the causative agent and consequently defining the management of the patient. This review aims to present the effectiveness of the application of molecular studies on cytological material to diagnose IDs and discuss the advantages and disadvantages of the various molecular techniques according to the type of cytological specimen and the infectious agents.

Amplification efficiency and thermal stability of qPCR instrumentation: Current landscape and future perspectives

Quantitative polymerase chain reaction (qPCR) is a method of amplifying and detecting small samples of genetic material in real time and is in routine use across many laboratories. Speed and thermal uniformity, two important factors in a qPCR test, are in direct conflict with one another in conventional peltier-driven thermal cyclers. To overcome this, companies are developing novel thermal systems for qPCR testing. More recently, qPCR technology has developed to enable its use in point-of-care testing (POCT), where the test is administered and results are obtained in a single visit to a health provider, particularly in developing countries. For a system to be suitable for POCT it must be rapid and reliable. In the present study, the speed and thermal uniformity of four qPCR thermal cyclers currently available were compared, two of which use the conventional peltier/block heating method and two of which use novel heating and cooling methods. The time required to complete 40 cycles varied between 12 and 58 min, and the C_t values were comparable, ranging between 13.6 and 16.8. Therefore, the novel technologies investigated in the present study for qPCR instrumentation performed equally well compared with conventional qPCR instruments, in terms of amplification efficiency and thermal uniformity.

Construction of Fe3O4/Vancomycin/PEG Magnetic Nanocarrier for Highly Efficient Pathogen Enrichment and Gene Sensing

Infectious diseases, especially pathogenic bacterial infections, pose a growing threat to public health worldwide. As pathogenic bacteria usually exist in complex experimental matrixes at very low concentrations, developing a technology for rapid and biocompatible sample enrichment is essential for sensitive diagnosis. In this study, an Fe3O4/Vancomycin/PEG magnetic nanocarrier was constructed for efficient sample enrichment and in situ nucleic acid preparation of pathogenic bacteria for subsequent gene sensing. We attached Vancomycin, a well-known broad-spectrum antibiotic, to the surface of Fe3O4 nanoparticles as a universal molecular probe to target bacterial cells. Polyethylene glycol (PEG) was introduced to enhance the nanocarrier's water solubility and biocompatibility. Results show that the proposed nanocarrier achieved a 90% capture efficiency even if at a Listeria monocytogenes concentration of 1×10(2) cfu/mL. Contributing to the good water solubility achieved by the employment of modified PEG, highly efficient enrichment (enrichment factor 10 times higher than PEG-free nanocarrier) can be completed in 30 min. Moreover, PEG would also develop the nanoparticles' biocompatibility by passivating the positively charged unreacted amines on the magnetic nanoparticles, thus helping to release the negatively charged bacterial genome from the nanocarrier/bacteria complexes when an in situ nucleic acids extraction step was executed. The outstanding bacterial capture capability and biocompatibility of this nanocarrier enabled the implementation of a highly sensitive gene-sensing strategy of pathogens. By employing an electrochemiluminescence-based gene-sensing assay, L. monocytogenes can be rapidly detected with a limit of detection of 10 cfu/mL, which shows great potential for clinical applications.

Rapid identification of positive blood cultures by matrix-assisted laser desorption ionization-time of flight mass spectrometry using prewarmed agar plates

This study describes an inexpensive and straightforward method for identifying bacteria by matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) directly from positive blood cultures using prewarmed agar plates. Different inoculation methods and incubation times were evaluated to determine the optimal conditions. The two methods using pelleted material from positive culture bottles performed best. In particular, the pellet streak method correctly identified 94% of the Gram negatives following 4 h of incubation and 98% of the Gram positives following 6 h of incubation.

Evaluation of the novel microarray-based Prove-it™ Bone&Joint assay for direct detection of pathogens from normally sterile body sites in comparison with culture and broad-range bacterial PCR

The performance of Prove-it™ Bone&Joint, a novel microarray-based assay for direct pathogen detection from clinical samples was assessed. In culture-positive samples, Prove-it™ performed similarly with broad-range bacterial PCR in osteoarticular (sensitivity 62.9% vs. 57.7%) and non-osteoarticular samples (54.6% vs. 56.8%). Prove-it™ is a rapid tool providing preliminary results while awaiting culture results.

Diagnosis of Parasitic Infections

Methods for the diagnosis of parasitic infections have stagnated in the past three decades. Labor-intensive methods such as microscopy still remain the mainstay of several diagnostic laboratories. There is a need for more rapid tests that do not sacrifice sensitivity and that can be used in both clinical settings as well as in poor resource field settings. The fields of diagnostic medical parasitology, treatment, and vaccines are undergoing dramatic change. In recent years, there has been tremendous effort to focus research on the development of newer diagnostic methods focusing on serological, molecular, and proteomic approaches. This article examines the various diagnostic tools that are being used in clinical laboratories, optimized in reference laboratories, and employed in mass screening programs.

A universal DNA extraction and PCR amplification method for fungal rDNA sequence-based identification

Accurate identification of fungal pathogens using a sequence-based approach requires an extraction method that yields template DNA pure enough for polymerase chain reaction (PCR) or other types of amplification. Therefore, the objective of this study was to develop and standardise a rapid, inexpensive DNA extraction protocol applicable to the major fungal phyla, which would yield sufficient template DNA pure enough for PCR and sequencing. A total of 519 clinical and culture collection strains, comprised of both yeast and filamentous fungi, were prepared using our extraction method to determine its applicability for PCR, which targeted the ITS and D1/D2 regions in a single PCR amplicon. All templates were successfully amplified and found to yield the correct strain identification when sequenced. This protocol could be completed in approximately 30 min and utilised a combination of physical and chemical extraction methods but did not require organic solvents nor ethanol precipitation. The method reduces the number of tube manipulations and yielded suitable template DNA for PCR amplification from all phyla that were tested.

Dip-pen microarraying of molecular beacon probes on microgel thin-film substrates

Micron-sized spots of molecular beacon probes are patterned on PEG microgel thin films using dip-pen nanolithography.

Point-of-care nucleic acid detection using nanotechnology

Recent developments in nanotechnology have led to significant advancements in point-of-care (POC) nucleic acid detection. The ability to sense DNA and RNA in a portable format leads to important applications for a range of settings, from on-site detection in the field to bedside diagnostics, in both developing and developed countries. We review recent innovations in three key process components for nucleic acid detection: sample preparation, target amplification, and read-out modalities. We discuss how the advancements realized by nanotechnology are making POC nucleic acid detection increasingly applicable for decentralized and accessible testing, in particular for the developing world.

A TaqMan-based multiplex real-time PCR assay for the simultaneous detection of Wuchereria bancrofti and Brugia malayi

With the Global Program for the Elimination of Lymphatic Filariasis continuing to make strides towards disease eradication, many locations endemic for the causative parasites of lymphatic filariasis are realizing a substantial decrease in levels of infection and rates of disease transmission. However, with measures of disease continuing to decline, the need for time-saving and economical molecular diagnostic assays capable of detecting low levels of parasite presence is increasing. This need is greatest in locations co-endemic for both Wuchereria bancrofti and Brugia parasites because testing for both causative agents individually results in significant increases in labor and reagent costs. Here we describe a multiplex, TaqMan-based, real-time PCR assay capable of simultaneously detecting W. bancrofti and Brugia malayi DNA extracted from human bloodspots or vector mosquito pools. With comparable sensitivity to established singleplex assays, this assay provides significant cost and labor savings for disease monitoring efforts in co-endemic locations.

Comparison of a real-time PCR method with serology and blood smear analysis for diagnosis of human anaplasmosis: importance of infection time course for optimal test utilization

Anaplasmosis and ehrlichiosis are emerging tick-borne diseases with clinically similar presentations caused by closely related pathogens. Currently, laboratories rely predominantly on blood smear analysis (for the detection of intracellular morulae) and on serologic tests, both of which have recognized limitations, for diagnostic purposes. We compared the performance of a published real-time PCR assay that incorporates melt curve analysis to differentiate Anaplasma and Ehrlichia species with blood smear and serologic methods in an upper Midwest population. Overall, 38.5% of the specimens selected for evaluation had one or more tests that were positive for anaplasmosis. The PCR positivity for all specimens was maximal (21.2%; 29/137) during the early acute phase of illness (0 to 4 days since illness onset) and significantly less frequent (11.5%; 20/174) during later phases (>4 days since illness onset). All positive specimens were Anaplasma phagocytophilum; no Ehrlichia species were identified. The real-time PCR detected 100% of infections that were detected by blood smear analysis (14/14) and broadened the detection window from a maximum of 14 days for smear positivity to 30 days for PCR. Additional infections were detected by real-time PCR in 12.9% (11/85) of smear-negative patients. There was poor agreement between the real-time PCR assay and serologic test results: 19.8% (19/96) and 13.7% (29/212) of seropositive and -negative patients, respectively, were PCR positive. Seropositivity increased with increasing days of illness, demonstrating that serologic detection methods are best utilized during presumed convalescence. Our results indicate that the optimal performance and utilization of laboratory tests for the diagnosis of anaplasmosis require knowledge regarding time of symptom onset or days of illness.

Recent advances in molecular medicine techniques for the diagnosis, prevention, and control of infectious diseases

In recent years we have observed great advances in our ability to combat infectious diseases. Through the development of novel genetic methodologies, including a better understanding of pathogen biology, pathogenic mechanisms, advances in vaccine development, designing new therapeutic drugs, and optimization of diagnostic tools, significant infectious diseases are now better controlled. Here, we briefly describe recent reports in the literature concentrating on infectious disease control. The focus of this review is to describe the molecular methods widely used in the diagnosis, prevention, and control of infectious diseases with regard to the innovation of molecular techniques. Since the list of pathogenic microorganisms is extensive, we emphasize some of the major human infectious diseases (AIDS, tuberculosis, malaria, rotavirus, herpes virus, viral hepatitis, and dengue fever). As a consequence of these developments, infectious diseases will be more accurately and effectively treated; safe and effective vaccines are being developed and rapid detection of infectious agents now permits countermeasures to avoid potential outbreaks and epidemics. But, despite considerable progress, infectious diseases remain a strong challenge to human survival.

Accurate and rapid identification of Candida spp. frequently associated with fungemia by using PCR and the microarray-based Prove-it Sepsis assay

The rapid identification of microbes responsible for bloodstream infections (BSIs) allows more focused and effective therapies and outcomes. DNA sequence-based methods offer an opportunity for faster, accurate diagnosis and for effective therapy. As our objective of the study, the ability of the Prove-it Sepsis platform, already proven as a rapid PCR- and microarray-based assay for the majority of sepsis-causing bacteria, was extended to also rapidly identify clinically relevant yeasts in blood culture. The performance characteristics of this extended platform are described. We found that the extended diagnostic Prove-it Sepsis platform was found to be highly accurate when analyzing primary isolates, spiked blood cultures, nucleic acid extracts from a retrospective blood culture data set, and primary blood cultures. Comparison of the blood culture results from the Prove-it Sepsis platform with those from conventional culture-based methods or by gene sequencing demonstrated a sensitivity of 99% and a specificity of 98% for fungal targets (based on analysis of a total of 388 specimens). Total assay time was 3 h from DNA extraction to BSI diagnosis. These results extend the performance characteristics of the Prove-it platform for bacteria to the easy, rapid, and accurate detection and species identification of yeasts in positive blood cultures. Incorporation of this extended and rapid diagnostic platform into the tools for clinical patient management would allow possibly faster identification and more focused therapies for BSIs.

The role of postmortem studies in pneumonia etiology research

The diagnosis of etiology in severe pneumonia remains a challenging area. Postmortem lung tissue potentially increases the sensitivity of investigations for identification of causative pathogens in fatal cases of pneumonia and can confirm antemortem microbiological diagnoses. Tissue sampling allows assessment of histological patterns of disease and ancillary immunohistochemical or molecular diagnostic techniques. It may also enhance the recognition of noninfectious conditions that clinically simulate acute pneumonia. Biobanking of lung tissue or postmortem culture isolates offers opportunities for new pathogen discovery and research into host-pathogen interactions. The Pneumonia Etiology Research for Child Health study proposes a percutaneous needle biopsy approach to obtain postmortem samples, rather than a full open autopsy. This has the advantage of greater acceptability to relatives, but risks greater sampling error. Both approaches may be susceptible to microbiological contamination or pathogen degradation. However, previous autopsy studies have confirmed the value of histological examination in revealing unsuspected pathogens and influencing clinical guidelines for the diagnosis and treatment of future pneumonia cases.

RNA signatures allow rapid identification of pathogens and antibiotic susceptibilities

With rising rates of drug-resistant infections, there is a need for diagnostic methods that rapidly can detect the presence of pathogens and reveal their susceptibility to antibiotics. Here we propose an approach to diagnosing the presence and drug-susceptibility of infectious diseases based on direct detection of RNA from clinical samples. We demonstrate that species-specific RNA signatures can be used to identify a broad spectrum of infectious agents, including bacteria, viruses, yeast, and parasites. Moreover, we show that the behavior of a small set of bacterial transcripts after a brief antibiotic pulse can rapidly differentiate drug-susceptible and -resistant organisms and that these measurements can be made directly from clinical materials. Thus, transcriptional signatures could form the basis of a uniform diagnostic platform applicable across a broad range of infectious agents.

A platform for combined DNA and protein microarrays based on total internal reflection fluorescence

We have developed a novel microarray technology based on total internal reflection fluorescence (TIRF) in combination with DNA and protein bioassays immobilized at the TIRF surface. Unlike conventional microarrays that exhibit reduced signal-to-background ratio, require several stages of incubation, rinsing and stringency control, and measure only end-point results, our TIRF microarray technology provides several orders of magnitude better signal-to-background ratio, performs analysis rapidly in one step, and measures the entire course of association and dissociation kinetics between target DNA and protein molecules and the bioassays. In many practical cases detection of only DNA or protein markers alone does not provide the necessary accuracy for diagnosing a disease or detecting a pathogen. Here we describe TIRF microarrays that detect DNA and protein markers simultaneously, which reduces the probabilities of false responses. Supersensitive and multiplexed TIRF DNA and protein microarray technology may provide a platform for accurate diagnosis or enhanced research studies. Our TIRF microarray system can be mounted on upright or inverted microscopes or interfaced directly with CCD cameras equipped with a single objective, facilitating the development of portable devices. As proof-of-concept we applied TIRF microarrays for detecting molecular markers from Bacillus anthracis, the pathogen responsible for anthrax.

Evaluation of high-throughput PCR and microarray-based assay in conjunction with automated DNA extraction instruments for diagnosis of sepsis

BACKGROUND

High incidence of septic patients increases the pressure of faster and more reliable bacterial identification methods to adapt patient management towards focused and effective treatment options. The aim of this study was to assess two automated DNA extraction solutions with the PCR and microarray-based assay to enable rapid and reliable detection and speciation of causative agents in the diagnosis of sepsis.

METHODOLOGY/PRINCIPAL FINDINGS

We evaluated two automated DNA instruments NucliSENS® easyMAG® and NorDiag Arrow for the preparation of blood culture samples. A set of 91 samples flagged as positive during incubation was analyzed prospectively with the high-throughput generation of Prove-it™ Sepsis assay designed to identify over 60 gram-negative and gram-positive bacterial species as well as methicillin resistance marker from a blood culture. Bacterial findings were accurately reported from 77 blood culture samples, whereas 14 samples were reported as negative, containing bacteria not belonging to the pathogen panel of the assay. No difference was observed between the performance of NorDiag Arrow or NucliSENS® easyMAG® with regard to the result reporting of Prove-it™ Sepsis. In addition, we also assessed the quality and quantity of DNA extracted from the clinical Escherichia coli isolate with DNA extraction instruments. We observed only minor differences between the two instruments.

CONCLUSIONS

Use of automated and standardized sample preparation methods together with rapid, multiplex pathogen detection offers a strategy to speed up reliably the diagnostics of septic patients. Both tested DNA extraction devices were shown to be feasible for blood culture samples and the Prove-it™ Sepsis assay, providing an accurate identification of pathogen within 4.5 hours when the detected pathogen was in the repertoire of the test.

Surface modification and biomolecule immobilization on polymer spheres for biosensing applications

Microspheres and nanospheres are being used in many of today's biosensing applications for automated sample processing, flow cytometry, signal amplification in microarrays, and labeling in multiplexed analyses. The surfaces of the spheres/particles need to be modified with proteins and other biomolecules to be used in these sensing applications. This chapter contains protocols to modify carboxyl- and amine-coated polymer spheres with proteins and peptides.

Matrix-assisted laser desorption ionization time-of-flight mass spectrometry identifies 90% of bacteria directly from blood culture vials

Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) is now widely used for marker/multi-biomarker detection in medical diagnosis. We tested a new protocol for bacterial identification from blood culture broths in hospital routine by using collection tubes with separator gels on 503 included samples examined over 3 months, where 1.5 mL was injected by a syringe into BD Vacutainer tubes from BACTEC-positive bottles, before processing for bacterial protein extraction. Samples were loaded in duplicate onto the MALDI MS target, allowing a series of 12 samples to be processed in duplicate within 80 min by using Biflex III and BioTyper 2.0 software (Bruker). Including polymicrobial samples, 193 of 213 of Gram-negative bacteria (91.08%) and 284 of 319 of Gram-positive bacteria (89.02%) were correctly identified at the species level. Enterobacteriaceae constituted 35.15% of all species found, Staphylococaceae 37.96%, Streptococaceae and Enterococaceae 20.85%, Pseudomonadaceae 1.69%, and anaerobes 2.44%. In most of the polymicrobial samples, one of the species present was identified (80.9%). Seven isolates remained misidentified as Streptococcus pneumoniae, all belonging to Streptococcus mitis. Staphylococcus aureus was identified better when grown on anaero-aerobic medium, and MALDI BioTyper identification scores as low as 1.4 were pertinent, provided that four successive proposals of the same species were given. This new protocol correlates with conventional microbiology procedures by up to 90%, and by >95% for only monomicrobial samples, and provides a decreased turn-around time for identification of bacteria isolated from blood cultures, making this technology suitable also for blood cultures, with less delay and cost decreases in bacterial diagnostics, and favouring better care of patients.

Detection of bacterial pathogens in Mongolia meningitis surveillance with a new real-time PCR assay to detect Haemophilus influenzae

Since the implementation of Haemophilus influenzae (Hi) serotype b vaccine, other serotypes and non-typeable strains have taken on greater importance as a cause of Hi diseases. A rapid and accurate method is needed to detect all Hi regardless of the encapsulation status. We developed 2 real-time PCR (rt-PCR) assays to detect specific regions of the protein D gene (hpd). Both hpd assays are very specific and sensitive for detection of Hi. Of the 63 non-Hi isolates representing 21 bacterial species, none was detected by the hpd #1 assay, and only one of 2 H. aphrophilus isolates was detected by the hpd #3 assay. The hpd #1 and #3 assays detected 97% (229/237) and 99% (234/237) of Hi isolates, respectively, and were superior for detection of both typeable and non-typeable Hi isolates, as compared to previously developed rt-PCR targeting ompP2 or bexA. The diagnostic sensitivity and specificity of these rt-PCR assays were assessed on cerebrospinal fluid specimens collected as part of meningitis surveillance in Ulaanbaatar, Mongolia. The etiology (Neisseria meningitidis, Hi, and Streptococcus pneumoniae) of 111 suspected meningitis cases was determined by conventional methods (culture and latex agglutination), previously developed rt-PCR assays, and the new hpd assays. The rt-PCR assays were more sensitive for detection of meningitis pathogens than other classical methods and improved detection from 50% (56/111) to 75% (83/111). The hpd #3 assay identified a non-b Hi that was missed by the bexA assay and other methods. A sensitive rt-PCR assay to detect both typeable and non-typeable Hi is a useful tool for improving Hi disease surveillance especially after Hib vaccine introduction.

[How the new generations of microbiologists view the specialty]

Despite their pivotal role in the Spanish healthcare system, clinical microbiology laboratories are experiencing difficult times and tough challenges. The following changes are required to adapt to the new situation: a) the use of molecular diagnostics to provide rapid diagnosis; b) the development of diagnostic capabilities to identify emerging or imported infectious diseases; c) the ability to advise on the interpretation of microbiological results; d) encouragement of the implantation of point-of-care testing and assessment of its performance and development; e) the implantation of quality control systems in the laboratory; f) the implementation of laboratory information systems to support real-time communication between hospital and community clinicians, public health laboratories and managers; g) the design of networking systems with professionals from other disciplines, and h) the promotion of training and teaching programs. Only if they are well prepared will clinical microbiology laboratories be able to implant the new technologies, be recognized as a cornerstone of the healthcare system, and achieve better recognition by society at large, hospital administrators and healthcare authorities.

Newer diagnostic approaches to intestinal protozoa

PURPOSE OF REVIEW

To update the reader on the latest developments in the laboratory diagnosis of intestinal protozoa.

RECENT FINDINGS

Correct identification of a diarrhoea causing pathogens is essential for the choice of treatment in an individual patient as well as to map the aetiology of diarrhoea in a variety of patient populations. Classical diagnosis of diarrhoea causing protozoa by microscopic examination of a stool sample lacks both sensitivity and specificity. Alternative diagnostic platforms are discussed.

SUMMARY

Recent literature on the diagnosis of intestinal protozoa has focused mainly on nucleic acid-based assays, in particular the specific detection of parasite DNA in stool samples using real-time PCR. In addition, the trend has been moving from single pathogen detection to a multiplex approach, allowing simultaneous identification of multiple parasites. Different combinations of targets can be used within a routine diagnostic setting, depending on the patient population, such as children, immunocompromised individuals and those who have been travelling to tropical regions. Large-scale monitoring and evaluation of control strategies become feasible due to automation and high-throughput facilities. Improved technology also has become available for differentiating protozoa subspecies, which facilitates outbreak investigations and extensive research in molecular epidemiology.