Mixed-matrix membranes with enhanced antifouling activity: probing the surface-tailoring potential of Tiron and chromotropic acid for nano-TiO2

Effect of Sulfonated Inorganic Additives Incorporated Hybrid Composite Polymer Membranes on Enhancing the Performance of Microbial Fuel Cells

Microbial fuel cells (MFCs) provide considerable benefits in the energy and environmental sectors for producing bioenergy during bioremediation. Recently, new hybrid composite membranes with inorganic additives have been considered for MFC application to replace the high cost of commercial membranes and improve the performances of cost-effective polymers, such as MFC membranes. The homogeneous impregnation of inorganic additives in the polymer matrix effectively enhances the physicochemical, thermal, and mechanical stabilities and prevents the crossover of substrate and oxygen through polymer membranes. However, the typical incorporation of inorganic additives in the membrane decreases the proton conductivity and ion exchange capacity. In this critical review, we systematically explained the impact of sulfonated inorganic additives (such as (sulfonated) sSiO₂, sTiO₂, sFe₃O₄, and s-graphene oxide) on different kinds of hybrid polymers (such as PFSA, PVDF, SPEEK, SPAEK, SSEBS, and PBI) membrane for MFC applications. The membrane mechanism and interaction between the polymers and sulfonated inorganic additives are explained. The impact of sulfonated inorganic additives on polymer membranes is highlighted based on the physicochemical, mechanical, and MFC performances. The core understandings in this review can provide vital direction for future development.

New Understanding of the Difference in Filtration Performance between Anatase and Rutile TiO2 Nanoparticles through Blending into Ultrafiltration PSF Membranes

The blending of nanomaterials into a polymeric matrix is a method known for its ability, under certain circumstances, to lead to an improvement in membrane properties. TiO₂ nanoparticles have been used in membrane research for the last 20 years and have continuously shown promise in this field of research. Polysulfone (PSf) membranes were obtained through the phase inversion method, with different TiO₂ nanoparticle concentrations (0, 0.1, 0.5, and 1 wt.%) and two types of TiO₂ crystalline structure (anatase and rutile), via the addition of commercially available nanopowders. Research showed improvement in all studied properties. In particular, the 0.5 wt.% TiO₂ rutile membrane recorded an increase in permeability of 139.7% compared to the control membrane. In terms of overall performance, the best nanocomposite membrane demonstrated a performance index increase of 71.1% compared with the control membrane.

High-Throughput Microfiltration Membranes with Natural Biofouling Reducer Agent for Food Processing

The effect of natural antibiotics Moringa oleifera seeds powder in cellulose acetate membranes as biofouling reducer agent was investigated. Mixed matrix membranes (MMM) were synthesized by adding 100 mesh M. oleifera seeds powder with variation of three concentrations (1 wt%, 2 wt%, and 3 wt%), into a mix polymer solution of CA (cellulose acetate) and two different solvents, i.e., DMF (dimethylformamide) and DMAc (dimethylacetamide). The synthesized membranes morphology was observed under scanning electron microscopy and from the images can be seen that the membranes made of DMAc formed rather large macrovoid as compared to DMF-based membranes. The microstructure affected the water flux through the membranes, in which the DMAc membranes provided a higher flux value and served as high-throughput microfiltration membranes. Antibacterial properties of MMM were tested using Escherichia coli adhesion onto membrane surfaces. The results showed that M. oleifera has been proven to eradicate E. coli activity on the membrane surfaces due to interaction between bacterial cells and phenolic compounds from M. oleifera, through absorption processes involving hydrogen bonds.